Used Brazing Machine For Carbide Saws for sale (67,975)

Condition: used, Kaltenbach saw, cutting machine, mitre saw, metalworking circular saw, used machine Manufacturer: KALTENBACH Model: KKS Machine No.: 21139 Electrical specifications: 400 V Weight : 1200 kg aprox. Cutting speeds (blade peripheral speed): Z59 tooth count: • 1st gear: 17 m/min • 2nd gear: 34 m/min Z72 tooth count: • 1st gear: 14 m/min • 2nd gear: 28 m/min Z90 tooth count: Dsdpfxjyfnpie Ah Nsuu • 1st gear: 11 m/min • 2nd gear: 22 m/min

Condition: used, Year of construction: 2017, capacity 90 degrees: round 120 mm capacity 90 degrees: square 105 mm capacity 90 degrees: flat 180x70 mm 110 mm 95 mm Duodpfxjy Ruvbj Ah Nju 135x60 mm 120 mm 100 mm 135x60 mm 180 mm dimensions of saw-blade 350x32x3,4 mm turning speeds 1700/3400 U/min weight of the machine ca. 600 kg

Condition: new, Band saw machine Make: OPTIMUM Model: S 275 NV Art.Nr.: 3300265 Condition: new machine Duedpfxjdynpcj Ah Nou Section (round): 225 mm Cutting speed: 20-90 m / min equipped as standard with: -Horizontal vise -Back fence - automatic shut-off after the end of the cut -Späneräumbürste -Coolant system -Manual

Condition: excellent (used), Year of construction: 1997, operating hours: 18,600 h, functionality: fully functional, machine/vehicle number: 110, saw blade diameter: 1,430 mm, tooth pitch: 110 mm, grinding wheel diameter: 125 mm, type of input current: three-phase, year of last overhaul: 2026, input frequency: 50 Hz, disc diameter: 125 mm, grinding wheel bore: 32 mm, grinding spindle motor power: 1,000 W, input voltage: 400 V, overall weight: 1,800 kg, coolant pump power: 100 W, number of axes: 3, The machine has been technically refurbished and upgraded to accommodate a maximum saw blade diameter of 80-1430mm. CEF350 is designed for sharpening the tooth flanks of carbide circular saw blades. Dsdsy Tpa Tjpfx Ah Nsuu

Condition: excellent (used), Saw Machine Haffner KL-176 Djdpfxefk I U Ro Ah Nouu

Condition: good (used), Year of construction: 2001, machine/vehicle number: 6028, functionality: fully functional, input voltage: 400 V, cutting width (max.): 1,200 mm, saw blade diameter: 4,000 mm, height adjustment type: hydraulic, rotational speed (max.): 6,000 rpm, rotational speed (min.): 3,000 rpm, length stop: 3,200 mm, table length: 3,200 mm, trimming length: 2,000 mm, Machine no: 6028 Types: 690 B 3000,4000,5000,6000 rpm Power: 3/400V/50Hz Motor: 5.5 Kw Dodpfevl Icrjx Ah Njuu Table 2000X400 mm

Year of construction: 1990, condition: good (used), This haul-off saw, manufactured by Battenfeld Extrusionstechnik GmbH, is stored in the machine store of Plastima Used Machinery. The machine was made in the year 1990. Brand: Battenfeld Extrusionstechnik GmbH Model: SAW MODELL SU630P Dedpfxetpnbue Ah Nouu Year of construction: 1990 Voltage: 380 V Power: 6,25 kW Pipe diameter max: 110 mm to 630 mm

Condition: good (used), Year of construction: 2016, functionality: fully functional, Year: 2016 - technically efficient, ready to work - after full service - cutting length: 4000 mm - discs: 500 mm (feed from the rear) - pneumatic inclination of both heads: 90°, 45°, 22.5°, intermediate angles set manually - operator panel with Windows - cooling and lubrication installation for both heads - movable roller feeder - vertical and horizontal pneumatic clamps - automatic disc covers - delivery device for long elements - safety gates Dsdstqmmdspfx Ah Nouu

Condition: new, ALTENDORF F 35 Type 1 - 1000 Panel Saw Robust, powerful, high cutting height – ideal for solid wood! - New machine - available immediately - Motor power: 7.5 kW, 400 V, 50 Hz, 3 speeds Motorized height and tilt adjustment Large protective hood Double roller carriage 3,200 mm Scoring unit preparation Rip fence, cutting width 1,000 mm Angle and mitre fence 3,450 mm, without longitudinal compensation Table extension/widening: powder-coated surface Saw blade tilt: 0 - 46° Carriage length: 3,200 mm Cutting length: 3,100 mm Cutting width: 1,000 mm Cutting height: 154 mm Max. saw blade Ø: 450 mm Duodpfx Ahoxtbtpo Nsu Screen size: 15 inches Working table height: 910 mm Extraction port Ø: 80 + 120 mm Including options: M45102 Rip fence 1000 mm Digit_X M64300 Front support roller M99008 Template holder

Condition: used, Year of construction: 2000, total power requirements: 2,2length of saw band: 3200cutting area width: 3200messurements (LxWxH): 2000 x 7000 x 1400weight approx.: 1500saw band dimension: 27 x 0,9Metal Bandsaw Bauer HS320GLZA Used horizontal metal bandsaw by Bauer, model HS320GLZA, year of manufacture 2000. The machine is equipped with automatic feed and is suitable for precise cutting of metal, pipes, and profiles in industrial and workshop use. Approx. dimensions: 200 x 700 x 140 cm.A roller conveyor system with a length of approx. [ 5000 mm] is included. The machine is used and located in our workshop. Viewing is possible on site. Duedpfxey Nuhno Ah Neu Location: 3071 Böheimkirchen, Neustiftgasse 34.

Condition: excellent (used), Bargain in excellent condition: panel saw and spindle moulder with tooling Dujdpfxey Ni Ays Ah Nou

Condition: new, Year of construction: 2021, Technical Specifications – kappa 400 / x-motion: Saw blade diameter: 250–400 mm Cutting height: max. 133 mm (at 90 degree) Saw blade tilting: 0 – 45 degree Dusdpfjy Nc Dkjx Ah Nsu Speeds: 3500 / 4500 / 5500 rpm Motor power: 5.5 kW (7.5 HP) Motor voltage: 3x 400 Motor frequency: 50 Hz Sliding table length: Standard 2500 mm Cutting width: 800 mm"X-Roll" system: (maintenance-free, roller bearing guidance) Control system: x-motion CNC control, 3-axis control Control panel: 5.7” (145 mm) TFT touch colour screen Features: Maintenance-free tilting segments: "Easy-Glide" Dust extraction port: Ø 120 mm (bottom) / Ø 80 mm (top) Weight: approx. 900 kgs The machine is in new condition and never has been used at all.

Condition: excellent (used), functionality: fully functional, Schmidt Tempo EC 500 Saw Blade Sharpening Machine For SHARPENING and NEW TOOTHING of HSS and segment circular saw blades, including beveling of teeth (top/bottom). Dusdpfx Ajhua E Dsh Nju Technical Data: - Blade diameter: approx. 20 – 500 mm - Saw blade thickness: max. 6 mm - Working speed: approx. 40–100 teeth/min - Grinding wheel diameter: max. 200 mm - Number of teeth: 20–999 (electronically selectable) - Tooth forms: tooth form A, AW, arc tooth B, BW and C per DIN 1840 (electronically selectable) Adjustment options: - Tooth form (electronically selectable) - Number of teeth (electronically selectable) - Automatic feed - Automatic dressing device - Free grinding (electronically selectable) - Oscillation grinding (electronically selectable) - Cylindrical grinding (electronically selectable) - Regrinding of segments - Setting the direction of rotation (electronically selectable) - Halving of number of teeth (electronically selectable) for tooth chamfering - Adjustment of tooth height difference - With LED display - Error message display Scope of supply: - Soundproof enclosure - 10 grinding wheels of various widths - Saw blade holders (small, medium, large: 60, 120, 180 mm diameter) - Grinding wheel holders (small, large: 80, 120 mm diameter) - 1 set of standard reducing rings 16 x 20, 22, 27, 32, 40, 50 mm - Saw blade support - Operating manual, circuit diagrams Weight: approx. 880 kg Connected load: 2.5 kW Operating voltage: 400 V Paint: Green The machine is in very good original condition and can be inspected/tested under power. The machine is sold with a 100% functionality guarantee upon delivery! Spare parts/accessories available if required. Subject to prior sale and errors.

Condition: new, Year of construction: 2026, CORMAK HBS275 band saw, equipped with a hydraulic cylinder, a cooling system and an arm swivelling up to 60º, together with blades from renowned German company Röntgen, is used commonly in ironworking, where precision, quality and cutting speed are essential. Horizontal band saw with a swivelling arm for cutting metals, allows for cutting in plane perpendicular to the axis of material cut and at any angle from 0 to 60º. Material for cutting can be fed manually or with any mechanical feeding device, with automatic tool feed. Band guides are equipped with dedicated carbide plates and bearings. This has a huge impact on band guiding, its durability, cut straightness, cutting accuracy and quality. Carbide guiding drastically reduces the wear of the machine and blades. Machine's arm made of uniform cast iron as well as a 27 mm wide cutting band are capable of low and high quantity cutting of profiles and other materials. The vice is located in an adjustable bed, equipped with a quick clamp. Blade guides have cemented carbide plates and roller bearings. Its these cemented carbide guides that provide cut precision and straightness. The arm, positioned at an angle of 25º, thus increasing blade durability. To the bottom of the arm a brush wire is attached, ensuring clean and functional brush. Machine's drive is transmitted through a worm drive. A 3-phase motor with 2 cutting speeds and motor thermal protection. This cutting machine also has a strain gauge - a band tension sensor and an automatic switch-off in case the cutting band breaks. Upper part of the base constitutes a tank for flood coolant draining and chips produced during cutting. A cast iron workbench is attached to the base, with a swivel arm and control panel on separate arm. The main cutting move in the cutting process is moving the cutting band and the arm lowering feed. The arm lowering speed (the cutting speed) is adjusted with the hydraulic cylinder. The feed speed is controlled by the control panel. There are 2 cutting band speeds to choose from: 37.5 and 75 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Total power Dodpfx Ajudi Unjh Njuu 1.5 kW Power supply 400V 50Hz Arm lowering control hydraulic cylinder Band dimensions 2455 x 27 x 0.9 mm Band speed 37.5/75 m/min Vice base height 900 mm Weight 215 kg Angle 0º ø220 260 x 140 200 x 200 45º R ø160 160 x 140 160 x 160 60º R ø100 120 x 100 100 x 100

Condition: new, Saw shaft and saw bush Duodpfsnladhsx Ah Nou Tool shaft and clamping bush

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, saw blade diameter: 550 mm, grinding wheel diameter: 150 mm, total width: 1,200 mm, total length: 1,200 mm, total height: 1,250 mm, type of input current: three-phase, input current: 4 A, input frequency: 50 Hz, grinding spindle motor power: 1,900 W, input voltage: 400 V, overall weight: 220 kg, spindle speed (min.): 3,700 rpm, Equipment: rotational speed infinitely variable, Loroch SW 550 machine in good working condition, ready for operation. The machine is suitable for professional workshop use. - saw blade dia. from 100 - 550mm - suitable for HSS saw blades for wood and metal cutting. - HSS saw blades geomeries - A, B, BW, C - Water cooling Dedpfxjy Sgqte Ah Nsuu - additional device for shaping band saw blades - Manual in Czech language (but it is simple machine)

Condition: good (used), Year of construction: 1998, machine/vehicle number: 3585, Offer 25255 Technical data: - Saw blade diameter up to 300 mm - Saw blade feed via hand lever - Maximum vise opening width: 145 mm Duodpfx Aey R Abljh Nou - Cutting capacity with saw blade diameter 300 mm: - At 90°: round 95 mm flat 125 x 90 mm - At 45°: round 95 mm flat 95 x 85 mm - Mitre adjustment: left up to 30° / right up to 45° - Saw blade speeds: 20 and 40 rpm - Drive: 400 V / 1.6 / 2.1 kW - Coolant system - Discharge roller table: 1500 mm - Required space approx. W 600 x H 2000 x D 800 mm - Weight approx. 250 kg

Condition: good (used), Year of construction: 2012, machine/vehicle number: 10004373, Offer 26126 Djdpfoy Rz S Nox Ah Neuu Technical specifications: - Manual saw blade feed - Workpiece clamping via machine vice - Saw blade diameter up to 315 mm - 2 cutting speeds: 40 – 80 m/min - Cutting range at 90°: round 110 mm; rectangular 82 x 160 mm; square 82 x 82 mm - Miter cut at 45°: round 110 mm; rectangular 80 x 120 mm; square 82 x 82 mm - Drive: 400 V / 1.4 / 1.9 kW - Coolant system - Space requirements approx. W 600 x H 1600 x D 750 mm - Weight approx. 300 kg - Measuring stop: 3000 mm

Condition: excellent (used), Individual machines are available for purchase—please contact us. VOLLMER CA200/CAL200 sawblades sharpening machines Key features: • 2 numerically controlled (CNC) axes • automatic sharpening • Technical condition: very good • Guides without play • New X and Y axis covers • Verified pusher assembly with new shock absorbers and actuators • Sharpener equipped with an automatic dressing wheel assembly • Individual exhaust system • Second pusher • Compatible with Vollmer N171 Dodpfx Asyzrcash Njuu • Many spare parts and grinding wheels available VOLLMER N171 PRIMULTINI BC - TENSIONG MACHINE for tensiong and leveling of bandsawsaw blades PRIMULTINI BC - TENSIONG HEAD for tensiong and leveling of bandsawsaw blades

Condition: used, Wegoma table saw machine offered. Type: TS 250 Dodpfx Aegmb Agjh Njuu For more information call us or send an e-mail.

Condition: used, Year of construction: 1974, Technical details: total power requirement: 1,65 kW weight of the machine approx.: 620 kg Saw Blade Sharpening Machine Machine not complete - grinding spindle motor missing! for sale as spare part dispenser! * Dujdowqplkjpfx Ah Neu

Condition: new, Year of construction: 2025, Cutting length: 3200 mm Cutting width at rip fence: 1250 mm Cutting width at crosscut fence: 3200 mm Cutting depth: 125 mm Scoring unit: yes Saw blade height adjustment: electric / NC control Saw blade tilt adjustment: electric / NC control Rip fence adjustment: electric / NC control Duedpfxexzfwue Ah Nju Saw blade angle display: digital Cutting height display: digital Rip fence display: digital Crosscut fence display: digital Saw blade diameter: 400 mm Motor output: 7 kW Motor brake: yes / automatic Extraction port: 80 mm and 120 mm Machine length: 3400 mm Machine width: 2000 mm Weight: 1025 kg

Condition: used, Machines for export from company closure Stock No. 62506 = RAPID Type DGL 5000 / 500 double mitre saw = Weight approx. 1,200 kg = Special price EUR 1,800 Stock No. 54183 = MÜLLER hydraulic press 10 ton, without hydraulic pump = Weight approx. 1,200 kg = Special price EUR 1,000 Stock No. 57780 = MÜLLER hydraulic press Type HEP 40 = Weight approx. 2,200 kg = Special price EUR 1,900 Hydraulic press – separate hydraulic power unit = Weight approx. 3,000 kg Stock No. 60507 = WEBO drill with 4 spindles = Weight approx. 1,900 kg = EUR 1,600 Stock No. 57592 = ALZMETALL drill with 2 spindles = Weight approx. 1,700 kg = EUR 1,200 Duodpey Erzdjfx Ah Neu Stock No. 60699 = WEBO column-type drill MK5 = Weight 1,600 kg = Special price EUR 1,600 Stock No. 60177 = WEBO radial drilling machine Type R4bR = Weight approx. 2,800 kg = Special price EUR 1,900 Stock No. 57432 = GILDEMEISTER Type GD 160 = Weight approx. 4,000 kg = Special price EUR 1,900 --- Many more machines in stock, available for immediate export. For example: 10 units welding machines, CLOOS, ESS etc. 2x HITACHI SEIKI CNC lathes

Condition: good (used), Mobile delivery for folding machine Heidelberg SAK-66 Fully operational, ready for production. Manufactured in Heidelberg, Germany. Dsdpfjy Ehknex Ah Njuu Brand new belts. Can be connected to any Heidelberg folding machine, with smooth delivery speed adjustment. Height and angle adjustment.

Condition: good (used), Carbide coating machine, carbide coating device -Manufacturer: Carbumatic, hard metal coating machine Dujdpfx Asy Edpyoh Nsu -Type: unfortunately without a type designation -Voltage: 3 x 220-380 V / 50 Hz -Power: 0.4 kWA -Transport dimensions: 470/470/H380 mm -Weight: 49 kg/piece