Used Battery Test System With Climate Chamber for sale (46,204)

Condition: excellent (used), Weiss Weiss Climate Test Chamber WKL 100/70 -70°C to +180°C, Humidity, 100 Litres Compressor has been replaced! Air-cooled For sale is a professional climate test chamber from Weiss Umwelttechnik. This equipment is ideal for material testing, climate tests, as well as temperature and humidity simulation in industrial environments, laboratories, or R&D. The test chamber provides precise test conditions for extreme temperatures and high humidity levels. Data for Temperature Testing: - Temperature range: -70 to +180°C - Temporal temperature deviation at the centre of the usable space: ± 0.3 to ± 1 K - Spatial temperature uniformity (based on setpoint, range tmin to +150°C): ± 0.5 to ± 2 K - Temperature change rate: Heating 3.5 K/min, Cooling 3.5 K/min - Heat compensation: max. 700 W Data for Climate Testing: - Humidification system: - Reservoir capacity: approx. 13 l - Water quality: demineralised - pH value: 6 – 7 - Conductivity: max. 20 μS/cm - Water consumption at constant temp. +40°C, 92% r.h.: 2 l / 24 h - Temperature range: +10 to +95°C - Humidity range: 10 to 98% r.h. - Temporal temperature deviation at the centre of the usable space: ± 0.3 to ± 0.5 K - Spatial temperature uniformity (based on setpoint): ± 0.5 to ± 1.5 K - Temporal humidity deviation at centre: = 1 to ±3% r.h. Internal dimensions: Height 400 mm, Width 470 mm, Depth 345 mm External dimensions: Height 1776 mm, Width 745 mm, Depth 980 mm Mechanical Load Data: - Maximum load of test compartment floor: 10 kg - Per shelf: 10 kg - Total rack load: 50 kg Operating Data: - Test compartment lighting: Halogen bulb 24V, 50W - Rated voltage: 1/N / PE AC 230V ±10% 50 Hz - Rated power: 3.5 kW - Rated current: 15.2 A - Customer-side fuse: 16A slow-blow - Protection rating: Control cabinet IP 22 and touch panel IP 54 Heat Dissipation (air-cooled chambers): - Max. heat output to environment: 2500 W Noise Level: Iisdpfx Aeyw Nnfskxoa - Sound pressure level (free-field measurement at 2 m in front, 1.0 m height): approx. 59 dB(A) Feedthrough: 50 mm ∅ Interfaces: Ethernet interface (RJ45), USB interface Refrigerants: R404A / R23 Test chamber volume: approx. 100 litres Weight: 210 kg Important Information for Buyers: For your safety, we perform the following steps before sale of our chambers: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certification 4. After successful testing, each chamber undergoes a documented trial run. Condition: used Scope of delivery: (see picture) (Specifications and information may be subject to change and error!) Feel free to contact us by phone for any further questions.

Condition: used, This listing is for the PTI Veripac P425 M5 Integrity Testing System. The unit is in full working condition and ready for immediate use. Designed for non-destructive leak detection using vacuum decay technology, it ensures packaging integrity for pharmaceutical and medical applications with precise, repeatable results. Iodeyyqa Ispfx Akxsia Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished)

Condition: as good as new (ex-display), functionality: fully functional, overall weight: 700 kg, total length: 900 mm, total width: 2,100 mm, total height: 2,200 mm, input voltage: 400 V, input frequency: 50 Hz, compressed air connection: 5 bar, electrical fuse: 20 A, The Ring Tester is designed for automatic crack detection on ring-shaped components such as bearing races and gears, using the eddyvisor C. Additionally, customers can test for grinding burn on the inner and outer rings of roller bearings. For this purpose, a robot handles and guides the sensor precisely along the contours of the test piece. The machine conducts tests using up to two probes. All relevant scan parameters and communication for controlling the eddyvisor C are integrated into the robot’s scanning program. At the heart of the system is the eddyvisor C 2-channel eddy current tester, which ensures reliable detection of cracks and grinding burn. Process automation is managed by an integrated Stäubli TX2-60 robot. The entire system is controlled and operated via a control cabinet featuring an integrated control and operator panel. A vertical spindle with a chuck securely clamps each test part during inspection. Non-conforming parts (NOK) detected during testing are automatically sorted onto two dedicated NOK discharge lanes. A separate staging area for reference and master parts supports calibration and continuous quality assurance during testing. The system includes the Optical Reflection Sensor by ibg (iORS) for precise, non-contact inspection of rings. Iijdjyx E D Ejpfx Akxja For further information, please visit our website.

Condition: excellent (used), Here we offer you a Heraeus Vötsch temperature test chamber. Isdshh H Hijpfx Akxsia Heraeus Vötsch temperature test chamber water cooled Temperature range -70°C to + 180°C Temperature deviation temporal ±0,1 to ±0,5 K Temperature deviation in time ±0.5 to ±2.0 K Temperature change rate cooling 7.5 K/min Temperature change rate heating 7.5 K/min Heat compensation +20°C 3000 W Heat compensation -20°C 3000 W Test chamber dimensions: Width 580 mm Depth 450 mm Height 750 mm Outer dimensions: Width 870 mm Depth 1280 mm Height 1575 mm Observation window: Width 300 mm x height 540 mm Test chamber volume 190 litres Rated voltage: 3/N/PE AC, 400 V ±10 %, 50Hz Rated power: 10.5 kW Rated current: 22 A Fuse, on-site: 32 A slow-blow Sound level at 1m distance (free field measurement) < 69dB (A) lateral feed-through 50 cm / 125 cm Cabinet is water cooled Refrigerant: R 404A and R 23 Weight approx. 460 kg Type: VTS 7018-5 For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. function check and exchange of necessary components 2. new filling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer gladly on the phone for you.

Condition: excellent (used), Heraeus Vötsch Type: VTS 7018-5 Heraeus Vötsch Temperature Test Chamber, Water-Cooled Temperature range: -70°C to +180°C Temporal temperature deviation: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 2.0 K Temperature change rate (cooling): 6.5 K/min Temperature change rate (heating): 7.5 K/min Heat compensation: 4,500 W Test chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm External dimensions: Width 870 mm x Depth 1,280 mm x Height 1,575 mm Viewing window: Width 300 mm x Height 540 mm Test chamber volume: 190 liters Rated voltage: 3/N/PE AC, 400V ±10%, 50Hz Rated power: 10 kW Rated current: 21 A Supply-side fuse: 32 A slow-blow Sound level at 1 m distance (free-field measurement): < 63 dB(A) Lateral port: 50 cm / 125 cm Chamber is water-cooled Refrigerants: R452A and R23 Weight: approx. 460 kg Important safety information for buyers: The following procedures are carried out on all chambers offered by us: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, all chambers are subjected to a documented trial run. Condition: used Scope of delivery: (see photos) (Technical data and specifications subject to change and errors!) If you have further questions, we are happy to provide information by phone. Iedpfx Asyu Rhgjkxoia

Year of construction: 2018, operating hours: 11,000 h, condition: good (used), functionality: fully functional, For sale is a highly efficient pressure fumigation system for chemical-free pest control in stored goods. The system utilizes proven CO2 pressure technology to reliably eliminate insects, larvae, and eggs in food products, raw materials, or textiles. Ideally suited for organic operations, mills, spice processors, or textile warehouses. Your advantages at a glance: 100% organic & residue-free: Uses natural carbon dioxide (CO2) instead of chemical agents – no risk to humans, the environment, or end products. Highly effective: Destroys pests at all developmental stages (egg, larva, pupa, adult) through oxygen deprivation and physical pressure. Gentle on products: Taste, appearance, and valuable ingredients of the goods are fully preserved. Versatile use: Suitable for grains, spices, tea, nuts, dried fruit, as well as textiles and packaging. Dimensions: L x W x H per chamber 11.80 m x 3.40 m x 3.10 m Weight: Just under 20 t per chamber Iijdpfxeyxm Ufe Akxoa

Condition: good (used), Year of construction: 2013, Helium leak detector Manufacturer: Leybold Type: Phoenix L300i Condition: very good! Connection: 230V Delivery time: ex stock (u.ü.V.) Isdpfxjt Uru Tj Akxeia

Condition: like new (used), Year of construction: 2022, Helium leak detector Iodpet Urlrofx Akxsia Manufacturer: Leybold Type: Phoenix Quadro EU Condition: As good as new Ready for use from 2022 unused Connection: 230V Delivery time: ex stock (u.ü.V.)

Condition: used, For sale or free of charge are three climate smoke chambers manufactured by AUTOTHERM, including accessories. These units are ideally suited for meat and food processing, particularly for cold smoking. Technical Data / Features: Chamber 1: approx. 8 racks (W approx. 2.10 m x D 5 m) Chamber 2: approx. 10 racks (W approx. 2.10 m x D 6 m) Chamber 3: approx. 12 racks (W approx. 2.10 m x D 7 m) Cold smoke system with 2 smoke generators (Goliat, sawdust) Temperature range up to approx. +22 °C (hot water heat exchanger) Humidity control available Cooling coil (R232, R404) Some refrigerant compressors present Construction: Iijdpfjyw Hl Isx Akxsa Air ducts, wall cladding, and control cabinet made of V2A (stainless steel) Condition: Electronics/control currently non-functional Control cabinet available Condition as shown in the pictures Additional equipment / accessories: Smoking sticks (wood) 2 kettles Cooking chamber (for 2 racks) Cleaning machine (defective) Freezer Important notes: Available free of charge Dismantling and transport to be organized by the buyer Inspection possible by appointment

Condition: used, Year of construction: 2016, functionality: fully functional, overall weight: 2,000 kg, color: black, power: 720 kW (978.93 HP), output voltage: 400 V, output frequency: 50 Hz, continuous power (apparent): 800 kVA, MarelliGenerator Alternator Model:MJB 355 MB4 B2 Rated Power: 900 kVA, 400V / 920 kVA, 440V Active Power: 720 kW Voltage: 400 V / 440 V Iodjwx H Hzepfx Akxjia Frequency: 50 Hz / 60 Hz Rated Current: 1155 A, 400V / 1207 A, 440V Speed: 1500 / 1800 rpm Power Factor: 0.8 Insulation Class: H Weight: 1950 kg Protection class: IP23 Bearings: 6317 C3 Lubrication: Mobil Polyrex EM Rotabloc RBT Alternator (Flywheel-Based UPS) Model Type: MJB-355 UPS Power Limitation: 500 kVA Voltage Range: 400 V ±12.5% Current: 722 A Frequency: 50 Hz Speed: 1500 rpm Weight: 1950 kg Manufactured in Belgium Features & Benefits Rotary UPS – No batteries required Compact footprint with integrated cooling Ideal for grid stability and critical systems Reliable European engineering (Belgium & Italy) CE marked, ready for international use Low maintenance – no chemical batteries

Condition: excellent (used), Weiss Type: WK 27'/50-150 Climatic Test Chamber Water-cooled Technical Data: Test Chamber Designation: WK 27'/50-150 External Dimensions Height 3500 mm, Width 3400 mm, Depth 6000 mm Control Cabinet Dimensions Height 2000 mm, Width 2400 mm, Depth 400 mm Internal Dimensions Height 3000 mm, Width 3000 mm, Depth 3000 mm Floor load capacity: 30,000 N/m³ (surface load) Test chamber volume: approx. 27,000 liters Specimen mass: 1000 kg Cooling / Heating Operation -50°C to 150°C Heating rate: 1.0 K/min Cooling rate: 1.0 K/min Temperature stability: ±0.3 to 1.0 K (over time) Temperature stability: ±0.1 to 0.5 K (over time) Climatic Operation 10 to 90°C Humidity: 10...98% rH Temperature stability: ±0.1 to 0.5 K (over time) Dew point range: +4 to +84°C 3/N / PE AC 400 V ±10% 50 Hz Weight: 7000 kg Refrigerants: R23 and R404A Equipped with extra floor plates to increase floor load capacity Important safety information for buyers: The following steps are carried out on all chambers we offer in advance: Ijdpfxovx Nfbe Akxsia 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant 3. After successful inspection, the chambers undergo a trial run monitored with calibrated equipment. Condition: used Scope of delivery: (see picture) (Subject to alterations and errors in the technical data and specifications!) If you have further questions, we are happy to assist you by phone.

Condition: excellent (used), Here we offer a Feutron climate test chamber. Feutron Climate Test Chamber Temperature Temperature range: -40...90°C Climatic range (without heat load): 10...85°C Temporal temperature deviation during temperature operation: ≤ ± 0.5 K/min Temporal temperature deviation during climatic operation: ± 1.0... ± 1.5 K/min Change rates Heating: avg. 2.0 K/min Cooling: avg. 2.0 K/min Standard IEC 1646 is achievable with testing, solar modules up to max. 160kg weight and nonlinear ramps (setpoint jump) Drying Air drying: condensation drying Humidity Air humidification: steam humidification Humidity range: 10...95 % r.h. Temporal humidity deviation: ≤ ± 3.0... ±5.0 % r.h. Dew point range: 8...80.9°C Test Chamber Test chamber volume: 7.0 m³ Dimensions Iedpfsklv H Isx Akxsia Internal dimensions: Width 1500 mm x Height 2250 mm x Depth 2000 mm Swing door DIN right, heated, Width 900 mm x Height 2100 mm Observation window, heated, with blackout shutter and lockable: Width 500 mm x Height 600 mm Feedthrough: 2x, right front side, Ø 75 mm Irradiation unit, test chamber Opening: 4x in left side wall for SC 2500, each 850 x 700 mm Irradiated area when using SC 2500: 1200 x 1200 mm Radiation intensity at 1.0 m wall distance: 1000 ± 10% W/m² Lighting: 1x halogen lamp, 200W Refrigeration system: Bitzer compressor, semi-hermetic, 2-stage, air cooled Condenser: split condenser (outdoor installation, winter control) Refrigerant: R507 / R23 Temperature control system Coolant medium Tyfocor / water Mixing ratio 50/50% Coolant density: 1.072 kg/dm³ Filling quantity: approx. 80 dm³ Pyranometer Temperature range: -40...150°C Max. radiation absorption: 4000 W/m² Spectral range (50% points): 305...2800 nm Sensitivity (nominal): 7 µV/W/m² Power supply, test chamber Mains connection: 400V, 3/N/PE, AC, 50Hz Connection type: hardwired Max. simultaneous power demand: approx. 32.0 kW Supply fuse: 3 x 63, Char C (A) Power supply, SolarConstant Mains connection: 400V, 3/N/PE, AC, 50Hz Connection type: Max. simultaneous power demand: approx. 30.0 kW Supply fuse: 3 x 63, Char C (A) Overall external dimensions of the test cell including: equipment room/control cabinet and control cabinet for SolarConstant 2500 External dimensions equipment room: Width 3440 mm x Height 2580 mm x Depth 2950 mm /control cabinet: Width 2200 mm x Height 1830 mm x Depth 1100 mm External dimensions condenser, split: Width 900 mm x Height 950 mm x Depth 2000 mm Weight test chamber (total): approx. 2700 kg Condenser empty weight: 153 kg Weight: 2700 kg Type: 3707/06 Condition: used Scope of delivery: (see picture) (Technical data and information are subject to change and errors!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), Year of construction: 2019, ACS Angelantoni Type: ACS WZH10-4080-2 BT Angelantoni Walk-in Climate Chamber ACS WZH10-4080-2 BT Optimized for Battery Testing (Li-Ion) -40°C to +80°C Description: For sale is a walk-in climate and environmental test chamber from the renowned manufacturer Angelantoni Test Technologies (ACS), model WZH10-4080-2 BT, year of manufacture 2019. The system is designed for demanding industrial, development, and research testing and features enhanced safety equipment specifically for battery and accumulator testing (e.g., lithium-ion). Special Feature: Safety Equipment for Battery Testing: The system is specially equipped for battery and accumulator tests, including: - Pressure relief flap for controlled release of pressure in the event of a malfunction - Gas warning system for early detection of critical gas concentrations - Aerosol fire suppression system (SalgroMAG) → ideal for lithium-ion testing Suitable for: - Batteries & accumulators (including lithium-ion) - Electronics & control units - Automotive components - Industrial & research testing - Endurance, ageing, and stress tests Technical Data (from nameplates & documentation): General: Model: WZH10-4080-2 BT Year of manufacture: 2019 Standards: CE, IEC/EN 60204-1 Design: Walk-in climate chamber, double-door Test Range: Temperature: –40 °C to +80 °C Humidity: 10% to 95% RH Electrical Data: Supply: 400 V, 3-phase + N + PE, 50 Hz Nominal power: approx. 37 kW Full load current: approx. 115 A Protection rating: IP54 Short-circuit resistance: 10 kA Refrigeration System: Refrigerant: R452A Charge: approx. 50 kg CO₂ equivalent: approx. 107 t Dimensions: Iisdjyg I Eyspfx Akxsa Dimensions (external, approx.): Length: ~ 4.5 m Width: ~ 2.2 m Height: ~ 2.4 m Weight: approx. 3,800 kg Condition: used Scope of delivery: (see photo) (Specifications and technical data subject to change and error!) For further questions, we are happy to assist you by phone.

Year of construction: 2019, condition: excellent (used), Weiss Model: WK 10/40-80 Test chamber volume approx. 10 m³ 10 m³ = 10,000 liters Modular Climatic Test Chamber Weiss WK 10/40-80 Design: Water-cooled refrigeration unit Refrigerant type: R449A Special equipment for battery testing: The climatic test chamber is fitted with enhanced safety features for battery and accumulator testing (e.g., lithium-ion batteries): • Pressure relief flap for controlled pressure discharge in case of faults • Gas warning system for early detection of critical gas concentrations • Fire extinguishing system with SalgroMAG aerosol extinguishing generators This equipment significantly increases safety during battery tests and supports use in development and testing environments (with consideration of a customer-provided safety concept/BMS). Description: For sale is a professional climatic test chamber from Weiss Technik, model WK 10/40-80, year of manufacture 2019. The unit is used for temperature and climate tests and is ideally suited for industry, research, development, and quality assurance. The system allows for temperature and humidity testing over a wide range and is designed for continuous operation in industrial and development laboratories. Particularly suitable for: - Functional and endurance testing - Material and component testing - Aging and climate simulation - Conditioning of samples - Battery and accumulator tests (e.g., lithium-ion) under defined climate conditions (subject to a corresponding customer safety concept/BMS) Operation via a modern S!MPAC® control unit with web panel; programs can be saved and run automatically. The unit was recently in operation and is fully functional. General: Manufacturer: Weiss Umwelttechnik GmbH Model: WK 10/40-80 Year of manufacture: 2019 Condition: used, functional CE mark: available Made in Germany Control system: S!MPAC® control system Web panel / touch operation Programmable and time-controlled operation possible Iiedpfx Akoygvw Rjxoa Temperature & Climate: Temperature range: −40 °C to +80 °C Temperature accuracy: ± 1 K Humidity range: 10% to 95% RH Humidity accuracy: ± 5% Dimensions: External dimensions (W×D×H): approx. 3300 × 5000 × 2500 mm Internal dimensions (W×D×H): approx. 3000 × 2200 × 1500 mm Test chamber volume approx. 10 m³ Media & Systems: Spray system: Water pressure 3 bar Compressed air connection: min. 5 bar Refrigerant: R449A Electrical data: Power supply: 3/N/PE, 400 V AC ±10 %, 50 Hz Rated power: approx. 44.9 kW Rated current: approx. 74 A Weight: approx. 3,900 kg Scope of delivery: Climatic test chamber Weiss Technik WK 10/40-80 Control unit / web panel Operating manual (German) Nameplate & documentation Condition: used Scope of delivery: (see photo) (Changes and errors in technical data and specifications reserved!) If you have further questions, we are happy to answer them by phone.

Condition: excellent (used), CTS Type: TW-60/9 Water-cooled temperature test chamber CTS Temperature Test Chamber Type TW-60/9 T stands for: Temperature W stands for: Walk-in -60 stands for: minimum temperature of -60°C 9 stands for: 9 m³ test chamber volume Technical specifications: Cooling unit: - Water-cooled, low-noise, semi-hermetic - Continuously variable capacity adjustment via electronic monitoring and control system - Environmentally friendly refrigerant R23 / R404A Control system: - 32-bit controller - LCD control panel - Digital display of set and actual values - Numerical input of set values - Error messages in plain text - RS 232 interface - Free switching channels for customer-side test sample control Technical performance data: Temperature testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.1 to 0.5 K over time - Temperature change rate (measured in supply air, including test load and heat radiation): Heating: 1.6 K/min from -40°C to +85°C Cooling: 1.6 K/min from +85°C to -40°C - Test load: 420 kg solar cell modules, following 100% - Heat radiation: 3000 watts permanent The technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test load, without heat radiation, and without additional equipment. Dimensions: - Test volume: 9 m³ - External dimensions (approx.): width 4140 mm, depth 2680 mm, height 3000 mm - Internal chamber dimensions (approx.): width 1600 mm, depth 2400 mm, height 2200 mm Operating data: Iodpfxevb Hane Akxsia - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Nominal power: 48.9 kW - Nominal current: 74.9 A - Protection class: IP 54 - Cooling water connections: supply/return R1 ¼", internal thread - Condensate drain, non-pressurized: R1", internal thread - Weight: approx. 5609 kg Condition: used Scope of delivery: (see picture) (Specifications and technical data are subject to change and errors!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), CTS Model: TW -60/9 Water-cooled temperature test chamber CTS Temperature Test Chamber Type TW -60/9 T stands for: Temperature W stands for: Walk-in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical Specifications: Cooling unit: - Water-cooled, low noise, semi-hermetic - Stepless capacity control via electronic monitoring and control system - Environmentally friendly refrigerants R23 / R404A Control: - 32-bit controller - LCD operating panel - Digital display of set and actual values - Numeric input of set values - Fault messages in plain text - RS 232 interface - Free switching channels for external test item control Technical Performance Data: Temperature tests: - Temperature range: -60 °C to +100 °C - Temperature deviation: ± 0.1 to 0.5 K (over time) Temperature change rate, average with test specimens and under radiant heat, measured at air intake: - Heating: 1.6 K/min from -40°C to +85°C - Cooling: 1.6 K/min from +85°C to -40°C - Test item: 420 kg solar cell modules, 100% load - Radiant heat: 3000 W permanent Technical data based on ambient temperature +25 ​​°C, nominal voltage 400 V, without test specimen, without radiant heat, and without additional equipment. Dimensions: - Test chamber volume: 9 m³ - External dimensions: width approx. 4140 mm, depth 2680 mm, height 3000 mm - Test chamber internal dimensions: width approx. 1600 mm, depth 2400 mm, height 2200 mm Operating Data: - Electrical connection: 400 V +6/-10 %, 3/N, PE, 50 Hz - Rated power: 48.9 kW; Rated current: 74.9 A - Protection class: IP 54 - Cooling water connections: feed/return R1 ¼”, internal thread - Condensate drain unpressurized R1” internal thread - Weight: approx. 5609 kg Iodpfx Akjvb E Uqexoia Condition: used Delivery contents: (See image) (Specifications subject to change and errors excepted!) We are happy to answer further questions by phone.

Condition: excellent (used), RS Simulators Type: KKM 110/45 Manufacturer: RS Simulators, water-cooled Climatic chamber 110 m³ incl. condenser unit The KKM 110/45 model is part of the TKM/KKM modular system by RS Simulators—a modular climatic chamber that is assembled on-site. This design offers: Modularity: Individual segments are preassembled and set up at the customer’s location. This makes retrofitting (adding depth or expansion modules) and later relocation straightforward. Technical specifications climatic chamber: Manufacturer: RS-Simulatoren Prüf- und Messtechnik GmbH Model: KKM 110/45 External dimensions: 6200 x 9400 x 3400 mm (W x D x H), incl. technical attachments Internal dimensions: 5900 x 7000 x 2960 mm (W x D x H) Chamber door (double-leaf): 3600 x 2930 mm (W x H) Personnel door (single-leaf) in side wall: 1880 x 900 mm (H x W) Feedthroughs: 8 x Ø120 mm (4x left & 4x right) Windows: 1x (460 x 550 mm) in front chamber door, heated 1x (1260 x 1000 mm) in left side wall, heated Temperature range: -40°C to +120°C Temperature fluctuation: ± 0.8K – 1.5K as per DIN 50011 with empty test area Humidity range: 10% to 95% Humidity tolerance: +/- 5.0% Refrigerant: 2x R404A 52 kg 2x R23 17 kg Temperature change rate: Heating: 1.0 K/min Cooling: 1.0 K/min Electrical data: Voltage: 3x400V/N/PE Current: 340A Weight: approx. 2,000 kg For your safety as a buyer, please note the following information! The following points are always carried out on the chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak testing with certification 4. After successful inspection, the chambers undergo a documented test run. Iijdpfewwg Uvex Akxea Condition: used Scope of delivery: (see image) (Specifications and technical details are subject to change and error!) If you have further questions, we will be happy to answer them by phone.

Condition: excellent (used), Here we offer you a walk-in climate chamber. Manufacturer: RS-Simulatoren, water-cooled The chamber can be disassembled into three parts for transportation (bolted construction). Temperature range: -30°C to +100°C Refrigerants: 20kg R-404A + 20kg R-452A External dimensions (approx.): Width 3,920 mm, Depth 7,350 mm, Height 2,600 mm Test chamber/internal dimensions (approx.): Width 3,500 mm, Depth 5,400 mm, Height 2,110 mm Electrical data: 68kW rated power Voltage: 3x400V/PE, Current: 135A Model: KKM 40 / 45 S Further technical details will follow! For your peace of mind as a buyer, please note the following: Iiodpfxoqw U Aae Akxoa We carry out the following procedures on all chambers offered: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful checks, the chambers undergo a documented test run Condition: used Scope of delivery: see picture (Subject to changes and errors in the technical data and specifications!) For further questions, feel free to contact us by phone.

Condition: excellent (used), Year of construction: 2022, Binder BINDER KB 720 Cooling Incubator with P Plus Package – Battery Test Chamber EUCAR 5, CO₂ Extinguishing System Device description: For sale is a BINDER KB 720 (E6) Cooling Incubator, year of manufacture 2022, equipped with the advanced safety and performance test package "P Plus". This device is not a standard laboratory incubator, but a high-quality safety test chamber specifically designed for aging, performance, and safety testing of lithium-ion energy storage systems. Isdpfjx Hf A Rsx Akxsia Special added value: The unit is designed to reliably detect, monitor, and safely contain critical battery events – up to EUCAR Hazard Level 5 (fire/flames, no explosion). What can the unit do? (Section 2 – Performance & Applications) - Aging tests on lithium-ion cells - Performance tests (charge/discharge cycles under temperature) - Continuous temperature runs and thermal cycling tests - Testing of unpowered and cyclically powered cells - Reproducible, precise temperature control throughout the usable space - Safe execution of tests under realistic thermal conditions - Test environment for R&D, automotive, e-mobility, and energy storage technology Suitable for: - Battery & cell manufacturers - Research and development laboratories - Test labs & safety testing - Automotive / e-mobility / energy storage sectors The P Plus package turns the KB 720 into a genuine battery safety test chamber: Integrated safety features: - Automatic & manual CO₂ fire suppression system - Fire detector with optical and acoustic alarm - Mechanical double-door locking mechanism (secure containment) - Spark protection inside the chamber - Exhaust nozzle with reversible overpressure flap - Ports for external inerting (e.g., nitrogen) - Emergency shut-off / manual activation of the extinguishing system - Ports for charging and measuring cables Result: The unit is designed for testing lithium-ion cells up to EUCAR Hazard Level 5, where fire or flames may occur without the risk of explosion or uncontrolled spread. It is not an abuse or destruction test chamber, but a reliable, standards-compliant test cabinet for realistic operational and fault scenarios. Technical core data: - Temperature range: –10 °C to +100 °C - Interior volume: approx. 698 liters - Shelves: 4 × stainless steel - Max. load per shelf: 45 kg - Max. total load: 100 kg Electrical data: - Power supply: 200–240 V AC - Frequency: 50 / 60 Hz - Phase: single-phase - Power consumption: approx. 2.1 kW - Fuse: 16 A - Refrigerant: R134a - Protection rating: IP 20 Dimensions & weight: - External (W × H × D): approx. 1250 × 1950 × 900 mm - Internal (W × H × D): approx. 970 × 1250 × 576 mm In summary – why this unit is exceptional: - Genuine battery safety test chamber - Suitable for EUCAR Hazard Level 5 - Integrated CO₂ extinguishing system - Large chamber (≈700 l) - High market and resale attractiveness - Weight: approx. 285–300 kg Condition: used Scope of delivery: (see photo) (Subject to modifications and errors in technical data. All information is without guarantee!) If you require further information, please don't hesitate to contact us by phone.

Condition: excellent (used), RMS Electrodynamic Vibration Test System Vibration Exciter SW 3006+ Power Amplifier TGA 1500 Technical Data: Sine: 3.7 kN Random: 3.7 kN Iiodehyly Rspfx Akxja Shock: 3.7 kN Stroke pk-pk: 26 mm Velocity: 0.9 m/s Acceleration: 80 g Cooling: air-cooled Condition: used Untested! Testing was not possible Scope of delivery: (see picture) (Changes and errors in the technical data may apply!) We are happy to answer further questions by phone.

Condition: excellent (used), RMS Type: SW 3509 + TGD 6000-000.00 amplifier and fan RMS Electrodynamic Vibration Test System Technical data: Sine: 7.5 kN Iijdpshylymsfx Akxea Random: 6.7 kN Shock: 13 kN Displacement pk-pk: 25.4 mm Velocity: Sine 1.5 m/s Random 2.5 m/s Shock 2.5 m/s Acceleration: 100 g Cooling: Air-cooled Total weight approx. 4000 kg Condition: used Scope of delivery: (see image) (Changes and errors in technical specifications reserved!) We are happy to answer further questions by phone.

Year of construction: 2024, condition: like new (used), functionality: fully functional, System Overview Complete modular chamber furnace system for batch homogenising of aluminium extrusion billets, electrically heated with jet-heating, waste-heat recovery, and full automation. CE-certified (Machinery Directive 2006/42/EG). Scope of supply: 1× Preheating furnace (BSN 1607) — electric, jet-heating 2× Holding furnaces (BSN 1608, 1609) — electric, forced air circulation 2× Heat-exchanger furnaces (BSN 1610, 1611) — unheated, forced air circulation 1× Charging machine (BSN 1612) — electric/hydraulic 12× Charging racks (BSN 1614) Control cabinet with Siemens S7-1515F 2PN (Profinet) PLC and operator panel Pusher thermocouples for direct billet temperature measurement Key technical advantages: Jet-heating for fast, uniform billet heating (typically 3–4× faster than conventional convection furnaces) Integrated heat-exchanger furnaces for efficient waste-heat recovery — reduced energy consumption and operating costs Overtemperature operation possible — shorter cycle times with direct billet temperature monitoring Suitable for homogenisation and/or solution heat treatment / ageing Modular design — suitable for new installations and retrofits of existing lines Ideal for: Aluminium extrusion plants and casthouses seeking to optimise energy consumption, CO₂ footprint, and throughput. Further technical details available upon request (PDF with full specifications). Ijdpfx Akoyuvq Texoia

Condition: used, This listing is for the Bio-Rad VARIANT II hemoglobin testing system The unit is in full working condition and is ready for immediate use The Bio-Rad VARIANT II is a high-volume, fully automated hemoglobin testing system. It is primarily used in clinical laboratories to measure HbA1c for diabetes monitoring and to detect -thalassemia and other hemoglobin disorders Automated Sampling: It accepts barcoded primary specimen tubes directly, eliminating the need for manual sample preparation. Multi-Analyte Testing: It can switch between different testing methods, such as a 3.5-minute program for HbA1c and a 6.5-minute program for thalassemia. Variant Detection: It is designed to provide accurate results even in the presence of common hemoglobin variants like HbS, HbC, HbD, and HbE. Iedpfx Akoyt Idvoxeia Data Management: Results and chromatograms are managed through Bio-Rad’s Clinical Data Management (CDM) software, which can interface with a lab's information system (LIS) for real-time reporting.

Condition: used, Espec Type: TSD-100 100 liters usable chamber volume for larger test specimens up to 30 kg. Compliant with all common international standards. Water-cooled Temperature range hot chamber: +60°C to +200°C Temperature range cold chamber: -70°C to 0°C Test chamber interior dimensions: 710 x 345 x 410 mm (W x H x D) External dimensions: 1100 x 1885 x 1965 mm (W x H x D) Water-cooled refrigeration unit Programmable control via touch panel Automatic defrosting Overtemperature protection Operating hours counter Mobile design (on castors) 2 stainless steel specimen baskets Cable entry port ⌀ 100 mm Refrigerants: 3 kg R404A, 1 kg R23 Iisdjxugq Aopfx Akxja Power supply: 400V 3Ph 50Hz Max. current consumption: 32A Condition: used Weight: 1100 kg Important safety information for buyers: The following procedures are performed on all chambers offered by us prior to sale: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Upon passing inspection, chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to modifications and errors in technical data and specifications!) For further questions, please feel free to contact us by phone.

Condition: used, Year of construction: 1973, This Heidelberg OHT, manufactured in 1973, is a robust and reliable punching machine designed for high-volume production. With a serial number T 184 103 H, this unit is currently located in Germany. It handles a largest sheet size of 260 x 380 mm and a smallest sheet size of 40 x 70 mm, with a maximum mold size of 260 x 350 mm. The machine delivers a punching force of 40 tons and boasts an impressive capacity of 5,500 sheets per hour. Powered by a 380 V, 1.25 KW motor, it features two locking frames and weighs 1,100 kg, making it both powerful and stable for continuous operation. The machine is offered as seen, ready for inspection and integration into your production line. Format: 260 x 380 mm Equipment: Ijdpfswxm Rmex Akxeia Hot foil system: original HEIDELBERG Largest sheet 260 x 380 mm Smallest sheet 40 x 70 mm Max. Mold size 260 x350 mm Punching force 40 tons Capacity 5500 Bg./h 380 V 1,25 KW Own weight 1100 kg 2 Locking frame