Used Autobag Autobag Q for sale (2,020)

Condition: used, Year of construction: 1975, functionality: fully functional, overall weight: 10,000 kg, total length: 2,745 mm, total width: 2,360 mm, total height: 2,700 mm, type of cooling: air, BBC BROWN BOVERI (nowadays ABB) – Pouromat, pouring furnace, type XCQ 44 TECHNICAL DATA - crucible capacity: 4.4t - tilting furnace - inductor 120kW - inductor voltage 380/425V - 2 operating modes: preheating, heating mode 1 - pouring rate: 1-20kg/s - dimensions:  height: approx. 2700mm  length: 2745mm  width: 2360mm - weight: approx. 10,000kg - furnace equipped with a bottom-pour stopper - average inductor lifespan: 12 weeks - average bottom-pour stopper lifespan: 1 week - average crucible lifespan: 4 – 6 months - furnace equipped with an additional device used to modify the liquid metal with ferrosilicon CONSTRUCTION The pouring furnace consists of four basic groups: - First group – longitudinal travel (orbit motor) - Second group – transverse travel, including the bottom-pour stopper - Third group – inductor with a power of 120 kW, voltage 380 V 50Hz, whose main task is to heat the liquid metal. The inductor is constantly air-cooled during operation. - Fourth group – switchboard with a built-in transformer, contactors and control station. POURING PROCESS The pouring process proceeds as follows: DISAMATIC 2032 A displays the molds on the conveyor in the correct position. The correct position means that the open pouring basin in the mold is located in a position compatible with the bottom-pour stopper at the bottom of the crucible. If the desired position is achieved, the operator manually (by means of a lever) lifts the bottom-pour stopper in order to fill the mold, until the liquid metal is visible in the outflow. The speed of pouring the molds can be adjusted depending on the diameter of the ceramic block and the orientation of the bottom-pour stopper towards the ceramic block. CERAMICS The manufacturer, BBC, recommends using a two-layer firebrick lining, where one layer is permanent, but the second is expendable. The permanent lining consists of an insulating layer, which is a lightweight burned stone, and a sillimanite layer. The expendable layer consists of a corundum material, meaning a concrete with a high clay content (94%). Both parts are connected together by means of a special cement. The crucible inductor is located in a lining of Al₂O₃ or MgO and SiO₂, depending on the requirements. The material used to seal the bottom-pour stopper has the quality of chamotte with different clay content. The inductor is assembled to the pouring furnace by means of screws and a sealing compound with the proper plasticity and heat resistance. The entire device consists of three stopper rod sleeves, a bot, and a ceramic block, where the bot and stopper rod sleeves are connected together. The bottom-pour stopper is seated on a threaded bar. The bottom-pour stopper is continuously air-cooled. Recommended air pressure: 6 atm. CERAMICS LIFESPAN 1. crucible: approx. 4 – 6 months 2. inductor: approx. 12 weeks Cedpfxjzfyu Ao Albjrg The lifespan of the ceramics depends on many factors. The most important are: production frequency, pouring temperature, cleanliness of the liquid metal, and alloy type. The lifespan of the upper cover and rotating cover is much longer because these parts have no direct contact with the liquid metal. PRICE *44,100 EUR *disassembly of the furnace, transportation costs, and assembly at the customer's location are paid by the Buyer; the price includes additional equipment: - additional (replaceable) inductors (without induction coil): 2 pcs.

Condition: used, Year of construction: 2011, Cross-cut and rip saw Manufacturer: HOLZMA Type: HQP 11/16/56/LX Year of manufacture: 2011 Technical data - Combined saw unit with cross-cut saw unit, cutting length 1,600 mm, and rip saw, cutting length 5,600 mm - additional pressure cylinder - postforming unit - waste flap 1600 mm Crsdpfezuyzzjx Albog - clamping device for cross-cut saw, 2-finger - automatic ejector guide - roller conveyor designed for 1,300 mm width - second drive in the roller conveyor - 1 m shaking chute 550 mm (driven) - mobile CADMATIC control panel - cooling unit for individual saw - with vacuum loading system and outfeed table Note: The technical data and descriptions are a copy of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: good (used), The scope of delivery includes: Crodpfx Aei Euw Eslbsg 1x shelf connector/flat bar, used Length: approx. 441 mm Center-to-center hole distance: approx. 400 mm Hole diameter: approx. 10 mm Cross-section: approx. 30 x 6 mm Surface: galvanized Weight: 0.62 kg | piece

Condition: used, For inquiries regarding the attachment, please contact Mr. Herden (by phone at any time). Holp Profile Bucket / PL.120.150 / OQ60-5 / 1,500 mm cutting width / HARDOX / NEW / in stock & immediately available Price: €3,605.00 net / €4,289.95 gross - Excavators up to: 12 tons - Own weight approx.: 450 kg - SAE capacity: 540 liters - Cutting width: 1,500 mm - Back width: 900 mm - Bucket made entirely of HARDOX (not just the cutting edge) Credpsy T Uvajfx Albjg Advantages of the Holp Profile Bucket: - No damage when rotating the bucket due to the beveled corners - Optimal design through numerous edges - Stable substructure - Minimal weight due to optimized design - Perfect material flow in the bucket - Advanced bucket bottom for optimal filling - Stable cutting edge made of Hardox 450 When precision is required, the profile bucket delivers the right result in a single workflow: No other bucket models and profiles more precisely and provides comparable efficiency in the processing of your orders than this specially designed bucket. We have a very large selection of various Holp products in our warehouse, which are immediately available! Please contact us for this at / . If desired, we will also gladly provide you with a financing offer. We are an official Holp sales and service partner. We are an official Magni telescopic handler sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Westtech sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Holp range for you! Errors and prior sale excepted! = Further information = New: Yes Intended use: Construction Unladen weight: 450 kg Please contact Marius Herden for further information.

Condition: used, Year of construction: 2022, operating hours: 2,343 h, Hydrema MX14G mobile excavator, year of manufacture: 2022, operating hours: 2,343 h, telescopic boom, hydraulic quick coupler Oilquick OQ65, 3 buckets (600 mm, 800 mm, 1,200 mm), 1 hydraulic trenching bucket (1,600 mm), air conditioning + heating, hammer and grapple lines, dozer blade, 20 km/h, engine: Cummins [129 kW/175 hp], weight: 15,900 kg, very good condition, ready for immediate use. We will be happy to provide you with a leasing or financing offer upon request. Mr. Mihm (tel. ) will gladly assist you. Further information can be found on our website. Errors and prior sale reserved! Crjdpfsy S N H Rex Albjg ZSA (additional equipment), quick coupler system, road approval, rental possible. = Further information = Drive: Wheeled Please contact Tobias Ebert for further information.

Condition: used, color: other, first registration: 12/2003, Year of construction: 2003, Empty weight: 450 kg Serial number: 27.50.744.145 We have a stock of >100 axles. Credpfx Asx Nf Edelbog Please contact us if you can't find what you are looking for.

Condition: used, color: other, first registration: 12/2003, Year of construction: 2003, Empty weight: 450 kg Serial number: 27.50.744.145 We have a stock of >100 axles. Please contact us if you can't find what you are looking for. Credpfxex Nf Hbj Albog

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, For sale: a complete iGolden 02P-WVQ 4-axis nesting CNC production line from 2023, designed for automated cabinet and furniture production. The installation consists of four interconnected components that together form a continuous production line: 1. Automatic sheet lift 2. Automatic labeling machine 3. 4-axis CNC nesting machine 4. Automatic unloading and output table Credev Dupvepfx Albog The line automates the loading, labeling, processing, and unloading of sheet material. This reduces manual handling and allows for the creation of an efficient and streamlined production flow. Included in the delivery: - Dust extraction system - Vacuum pump for the CNC bed - ISO30/ER32 tool holder - Haixun Quick Design 3D cabinet software - Haixun Quick Production production software - Spare parts - Stock of labels Dimensions: - Control cabinet: approximately 80 × 60 × 190 cm - Dust extraction system: approximately 140 × 80 × 140 cm - Labeling machine: approximately 4,000 × 2,700 × 1,800 mm A complete solution for companies that want to automate sheet metal processing and cabinet production, from sheet input and labeling to CNC machining and output.

Condition: excellent (used), Unused Ingersoll Rand QM Series Nut Runner - interconnecting cable and controller Csdpfx Aswric Eslbjrg

Condition: used, For inquiries about the attachment, Mr. Herden will be happy to assist you (by phone: [number]). Holp VarioBucket / VL.112.400 / OQ45-5 / HARDOX / NEW / in stock & immediately available Price: €4,265.00 net / €5,075.35 gross - Suitable for excavators from 7 to 14 tons - Own weight approx.: 320 kg - SAE capacity: 400 liters - Slope angle: 54° - Trench base radius: 150 mm - The bucket is made entirely from HARDOX. Advantages of the Holp VarioBucket: - Large working surfaces Crodsyhykujpfx Albjg - Robust design using premium-grade materials - Minimal weight thanks to optimized triangular construction - Rounded base - Two working openings - Rectangular working opening - V-shaped - The VarioBucket impresses with its high performance and precise operation. The V-shaped opening enables pinpoint discharge and offers very high trench cleaning performance in drag operation. Wherever higher speed and flexibility are needed to handle various tasks, the VarioBucket is a real asset on the construction site: faster, more adaptable, and safer. We have many more Holp products in stock and available immediately! Mr. Herden (phone: [number]) will be happy to advise you. On request, we are also happy to provide you with financing options. We are an official sales and service partner for Holp, Gierking GMT, OilQuick, Weber MT, Westtech, DMS, Seppi M., Magni telehandlers, JCB construction machines, Mercedes-Benz, and Iveco. With 800 used commercial vehicles, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete Holp product range for you! Errors and prior sale excepted! = More information = Condition: New Purpose: Construction Unladen weight: 320 kg Contact Marius Herden for further information.

Condition: used, Year of construction: 1971, For sale is a TOS WH 80 drilling machine, manufactured in 1971, in working condition. The machine is equipped with a retrofitted digital display and has an MK5 spindle. Equipment / Condition: * TOS WH 80 Crsdpfx Alezwv Dkebjg * Year of manufacture: 1971 * Functional * Retrofitted digital display * MK5 spindle * Large clamping table with T-slots * A large amount of additional equipment and accessories is available * Maintenance / Repairs: In 2024, the gearbox was opened and overhauled. Various gears were renewed or replaced during this process. The machine can be inspected on-site and, by arrangement, demonstrated. Due to its size and weight, the buyer is responsible for organizing the collection or transport. Further photos and information on the available additional equipment are available upon request. VAT can be shown separately.

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 1,116 h, load capacity: 4,500 kg, lifting height: 5,500 mm, free lift: 1,700 mm, load center: 600 mm, fuel type: diesel, mast type: triplex, construction height: 3,550 mm, fork length: 1,200 mm, front tire type: superelastic tires (black), rear tire type: superelastic tires (black), empty load weight: 7,240 kg, total height: 2,900 mm, total length: 2,550 mm, total width: 2,250 mm, maximum load weight: 4,500 kg, fuel: liquid petroleum gas (LPG), Equipment: 3rd hydraulic function, 4th hydraulic function, adjustable boom, cabin, lighting, pallet forks, The Hubtex is in perfect condition. It has only 1116 operating hours. We sell forklifts after they have undergone a complete service. They are prepared for the end user. They are ready for immediate use. We can arrange transport within Europe and worldwide. Crsdpfxjzxg Rdj Albeg

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 6,230 h, load capacity: 4,000 kg, lifting height: 6,500 mm, free lift: 2,100 mm, load center: 600 mm, fuel type: diesel, mast type: triplex, construction height: 3,250 mm, motor manufacturer: PERKINS, gearing type: hydrostat, fork carriage width: 1,250 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200/50-10, rear tire type: cushion tires (black), rear tire size: 250-15, overall weight: 11,400 kg, empty load weight: 7,400 kg, total height: 2,600 mm, total length: 2,500 mm, total width: 2,250 mm, color: orange, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, HUBTEX DQ40D – 2012 | 6,230 OPERATING HOURS | DIESEL | TRIPLEX 6,500 mm | FORK POSITIONER | FREE-LIFT 🚜 Ready to work from day one – no investment, no risk 🚀 --- Why choose this forklift? 🤔 Are you looking for a machine that won't interrupt your workflow? ⏱️ This HUBTEX DQ40D is a proven unit after comprehensive servicing – ready for immediate operation. No hidden fees. 💼 ✔ major service completed (oil, filters, complete inspection of all components) 🔧 ✔ technical and aesthetic condition: like new ✨ ✔ only 6,230 operating hours – very low mileage 📊 ✔ new tyres – no further investment needed 🛞 --- Key specifications ⚙️ * Capacity: 4,000 kg ⚖️ * Power: DIESEL ⛽ * Mast: Triplex – 6,500 mm 📏 * Fork positioner: 1,250 mm ↔️ * Forks: 1,200 mm * Cabin: full, heated 🔥 --- Full technical specification 📋 General data: * Year of manufacture: 2012 📅 * Operating hours: 6,230 * Capacity: 4,000 kg * Load center: 600 mm * Weight: 7,400 kg Mast & lifting: * Mast type: Triplex * Lifting height: 6,500 mm Forks & attachments: * Fork positioner: 1,250 mm * Forks: 1,200 mm Dimensions: * Height: 2,600 mm * Length: 2,500 mm * Width: 2,250 mm * Closed height: 3,250 mm Chassis: * Tyres: superelastic (100%) – new 🛞 * Front: 200x50-10 * Rear: 250-15 Equipment: * Full heated cabin 🔥 * Wide fork positioner ↔️ * Lighting 💡 * Free lift Condition: * Technical: 5/5 – post full service ✅ * Aesthetic: refurbished, like new, no corrosion ✨ --- Ideal for 🏭 ✔ narrow aisle warehouses 📦 ✔ timber, steel, and pipe industries 🪵 ✔ long load handling 📏 ✔ indoor and outdoor applications 🌦️ --- What you get 💼 You’re not buying a “used forklift.” You’re buying a fully prepared, ready-to-work machine: ✔ every machine is fully tested before sale 🔍 ✔ ready for immediate deployment 🚀 ✔ live online demonstrations available 💻 ✔ transport to your facility provided 🚛 --- Delivery and support 🌍 * transport across Europe * comprehensive logistics support * assistance with leasing/financing 💰 * after-sales support 🤝 --- Why FT LOGISTICS? 💪 Cedpfszxhn Rox Alberg We deliver forklifts that perform – not machines that stay in the workshop. ✔ over 100 units available 📊 ✔ in-house servicing and preparation 🔧 ✔ pan-European experience 🌍 ✔ hundreds of satisfied clients ⭐

Condition: refurbished (used), Year of construction: 2023, functionality: fully functional, Lenze Bachhofen AG, drive technology TYPE: Codpfx Alszxbh Doborg MDFQABS100-22 100 Hz 20.6 kW 2930 rpm Completely overhauled in 2023 See images.

Condition: used, mileage: 289 km, fuel type: electric, fuel: electricity, Year of construction: 2024, Year of manufacture: 2024 Crsdpfjznmhnox Albjg Manufacturer: Yamaha US

Condition: used, Year of construction: 2011, Wire erosion / EDM Codpfx Aszu Rurjlberg Travel distance X: 400 mm Travel distance Y :300 mm Travel distance Z: 250 mm max. workpiece size X: 590 mm max. workpiece size Y: 450 mm max. workpiece size Z: 250 mm max. workpiece weight: 550 kg table size X: 935 mm table size Y: 770 mm U / V axis: 80 CNC wire EDM machine X/Y travel: 400 × 300 mm Z-axis travel: 250–350 mm U/V axes: 80 × 80 mm Taper cutting: up to ±20° at 80 mm workpiece height Max. workpiece dimensions: 590 × 450 × 250 mm Max. workpiece weight: 550 kg Large worktable: 935 × 770 mm Wire diameter: 0.1–0.3 mm Max. wire speed: 420 mm/s Linear motor technology on X and Y axes Suitable for high-precision contours and complex workpiece geometries U/V axes also enable angled and taper cutting

Condition: used, MAZAK QTN 200II MSY Year: 2007 Y-axis Counter-spindle Parts catcher Tool probe Max. diameter: 380 mm Max. length: 538 mm Max. bar capacity: 65 mm 12-position turret X-axis: 230 mm Y-axis: 100 (+/- 50) mm Z-axis: 575 mm W-axis: 585 mm Interface for bar feeder Hainbuch chuck on the main spindle Included with the machine: - Chip conveyor - Documentation - 11 collets, including 4 driven collets (2/2) Cjdpfx Alszvn Ifsbjrg

Condition: ready for operation (used), Telemecanique / Schneider ATV58FHD16N4 frequency inverter SN, used, in good condition, 100% fully functional, scope of delivery as per photos. Crjdpszu Hgkefx Albeg

Condition: ready for operation (used), Telemecanique ATV18D16N4 ALTIVAR 18 frequency inverter SN:1028116112, used, normal signs of wear, 100% functional, scope of delivery as per photos. Crsdszu Hgqjpfx Albjg

Condition: ready for operation (used), Turck LT300M-Q21-LU0X3-H1141 linear position sensor 300 mm SN:130460B014908, used, good condition, 100% functional, scope of delivery as per photos Codpfxjzu Hmwo Alberg

Condition: used, empty load weight: 8,613 kg, maximum load weight: 29,387 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 01/2023, next inspection (TÜV): 09/2026, loading space volume: 55 m³, suspension: air, tire size: 385/65 R22,5, Year of construction: 2023, Equipment: ABS, Poids à vide: 8613kg, Poids total admissible: 38000kg, La taille du pneu: 385/65 R22.5, Volume espace de charge: 55 m³, 1er essieu: , 2ème essieu: , 3ème essieu: , Suspension pneumatique, Dispositif anti- encastrement, Essieu relevable, Système de freinage électronique EBS, Porte universelle, Fiche de raccordement 1x15 et 2x7 broches, Anti-spray, Vous trouverez un aperçu de tous nos véhicules disponibles sur notre site web . Besoin d’un financement ? Nous proposons des financements individualisés, ainsi que du full-service ou un service télématique.Nous serons heureux de vous conseiller personnellement. Crjdpfx Ajzwagvslbjg

Condition: good (used), turning height: 1,275 mm, workpiece weight (max.): 1,200 kg, workpiece diameter (max.): 1,800 mm, overall weight: 28,000 kg, max dia of workpiece - 1800 mm Csdpfx Aezwd Evslborg More nformation and photos available upon request.

Condition: good (used), Year of construction: 1991, functionality: unexamined, machine/vehicle number: 226 500123, Weinig four-sided planer in good, used condition. Quattromat 22 – Year of manufacture 1991 Accessories: 4 planing heads The planing machine was used for many years in solid wood production. The machine is being sold as part of the liquidation of our carpentry business. Collection price – delivery possible upon request. The sale is made with the exclusion of any warranty for defects. Liability for intent, gross negligence, as well as for damages resulting from injury to life, body or health remains unaffected. Claims for defects that have been fraudulently concealed also remain unaffected. Crjdsziu I Ejpfx Albeg An inspection of the machine is possible by arrangement.

Condition: used, mileage: 95,000 km, power: 220 kW (299.12 HP), fuel type: hybrid, gearing type: automatic, first registration: 08/2022, next inspection (TÜV): 08/2027, color: black, number of seats: 5, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), immobilizer system, navigation system, parking heater, second-hand vehicle warranty, Special equipment: Audi connect (internet-based services), Business package, Exterior mirrors electrically adjustable, heated and foldable, with automatic dimming and curb assist, Exterior mirrors with curb assist, right, Bluetooth hands-free system with voice recognition (Audi Phone Box), Multi-Media Interface MMI Navigation Plus with MMI Touch, Sun protection roller on rear door windows, Front seat heating, Interior mirror with automatic dimming, Roof rails (aluminum), Parking assist front and rear, visual (APS Plus), Gloss package, Head-up display, Instrument cluster digital (virtual cockpit), Start/Stop button, Steering wheel (sport/leather - 3-spoke, flattened at the bottom) with multifunction plus, Seat cover / upholstery: Fabric Impressum, Special paint Brilliant Black, Sports seats front, Rear window tinted (privacy glazing) Crjdpozwh Uzsfx Albog Additional equipment: New price: €52,933 net, list price 8 speakers, Airbag driver/passenger side, Acoustic pedestrian protection, Exterior sound (e-sound), All-wheel drive coupling, Audi connect (emergency call and assistance system), Audi Drive Select, Exterior mirrors in vehicle color, Headliner fabric, e-tron charging system, Door sill trims with aluminum inlay, Electric motor 105 kW (hybrid drive), Windshield acoustic glass, Floor mats velours, Luggage compartment separation (net), Speed limiter, Cup holders, Rear lights LED, Hybrid 220 kW (engine 2.0 L - 195 kW TFSI), Interior: Decorative inserts accent parts black matte, Interior: Decorative inserts micrometallic silver, Isofix mounting for child seat, Body: 4-door, Comfort automatic climate control 3-zone, Head airbag system (Sideguard), Fuel tank: 54 liters, Charging cable for public charging stations (e-tron), Charging cable with industrial plug (16 A / 400 V), Charging cable with Schuko plug, Loading edge protection, Steering column (steering wheel) mech. Height/longitudinal adjustment, Light alloy wheels, Auxiliary electric heater, Model revision, Non-smoker package, Gasoline particulate filter (OPF), Parking brake electro-mechanical, Radio reception digital (DAB), Wheelbase 2819 mm, Tire repair kit, Rear seat back divided/foldable, sliding (40:20:40), Low emissions according to exhaust standard Euro 6d, Side airbags front, Front seats manually adjustable, Standard chassis, Start/Stop system, Bumper design: Basic, Universal interface Bluetooth

Condition: used, empty load weight: 8,476 kg, axle configuration: 3 axles, first registration: 02/2019, suspension: air, Year of construction: 2019, Equipment: ABS, Tara: 8476kg, Suspensión neumática, Barra antiempotramiento, Sistema de frenado electrónico EBS, Enchufe de conexión 1x15 y 2x7 pines, Anti-spray, Pueden encontrar todos nuestros vehículos disponibles en nuestra página . ¿Necesitan financiación?. En la mayoría de los países europeos ofrecemos soluciones de financiación a medida, full service y servicios telemáticos. Estaremos encantados de poder atenderlos. Crsdpszwz Iuofx Albog