Used Abfüllanlage Logdos Späth Typ K-Dos.fal 40Ex for sale (36,865)

Condition: new, Year of construction: 2025, total height: 4,000 mm, total length: 7,000 mm, total width: 3,000 mm, warranty duration: 24 months, temperature: 80 °C, air demand: 36,000 m³/h, input voltage: 380 V, heating capacity: 345 kW (469.07 HP), power: 40 kW (54.38 HP), fuel: liquid petroleum gas (LPG), energy consumption: 40 kWh, insulation material: Mineralwolle, insulation thickness: 50 mm, nominal power: 345 kW (469.07 HP), Equipment: lighting, MAIN STANDARD Our paint booths are designed to meet all necessary requirements for paint application, including air filtration, extraction, lighting, and a controlled environment. Booth processes are managed via a PLC system, ensuring that desired values are maintained consistently. OPERATING PRINCIPLES OF THE BOOTH The booth’s processes are managed through a control panel, which oversees the following steps: PAINTING PROCESS During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled through the extraction unit. Floor filters (paint stop filters) collect paint particles, and the air passes through final exhaust filters before being discharged. FLASH-OFF PROCESS After painting, the booth continues operating for approximately 15 minutes to purge residual solvents and thinners. During this phase, fresh air circulates from outside into the booth. Tedpfswzmcbox Amrec DRYING PROCESS In this stage, 80% of the air passing through the booth is heated to 60°C and introduced via a distribution system. Since 20% of the solvent is released during drying, it is expelled with the exhaust air. Industrial coatings are typically dried at 60°C, but the booth temperature can be adjusted as needed via the control panel. COOLING PROCESS After the 30-minute drying cycle, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the subsequent 5-minute cooling phase, fresh air from outside circulates through the booth, after which the system shuts down automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT These control panels govern the functions and operation of machines and devices housed within the booth. The panel is made of durable galvanized sheet and steel profiles and is fully enclosed to protect against dust and moisture. Electrical Equipment and Control Panel: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control connections between the control panel and motors or other electrical devices. • Electrical wiring is designed to accommodate booth relocation if needed. • Operating equipment uses 380 V 50 Hz, while control devices operate at 220 V. • The booth’s operation time can be monitored on the electronic control panel, enabling straightforward maintenance scheduling. • Temperature and time settings for booth ventilation (solvent flash-off), intermediate drying, and final drying can be easily adjusted to required values on the digital display of the electronic control panel. • Users can monitor and adjust the drying time using the heating thermostat and time relay.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: PEF-2.5 PULVER EINBRENNOFEN ELEKTRISCH, temperature: 230 °C, heating capacity: 30 kW (40.79 HP), inner dimension length: 2,500 mm, inner dimension width: 1,505 mm, ✈️ Plus shipping costs – Shipping available upon request.✈️ Fast delivery: Only 6 weeks after receipt of payment! ✅✅✅Energy Class A+++✅✅✅ ✅ Plug & Play system – Delivered fully assembled, ready to use immediately! ✳️ Maintain your liquidity! We offer a variety of financing options to ensure your investment has the best chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs. ☘️Environmentally friendly☘️⚡️Green energy⚡️☘️ ⭐ Powder furnace with electric heating - ✔️ Internal dimensions: 2500 mm L * 1505 mm W * 1800 mm H ✔️ Electric heating output: 30 kW/h ✔️ Fan: 3000 m3/h 80 mm SS ✔️ Circulation fan output: 1.5 kW/h ✔️ Total 35 kW/h +- 10% ✔️ Digital heat control, continuously adjustable temperature up to 220°C ✔️ Sandwich panels inside: 1.5 mm galvanized steel, outside: 1.5 mm powder-coated Steel ✔️ Adjustable curing temperature, curing time, and exhaust fan function ✔️ An audible signal sounds at the end of the curing time ✔️ Insulated door with special locking systems (snap lock) ✔️ Insulation: 150 mm (150 mm rock wool) 🔥 PEF-2.5 Curing Oven: Your versatile industrial oven for drying and curing processes! 🔥 Whether powder coating, wet paint, plastic processing, or other thermal processes – the powder curing oven is your reliable solution for professional curing and drying processes up to 230°C! 🌡️ _____ 🚚 Maximum loading flexibility • Compatible with ceiling rail systems Tjdpfx Ajwfgbrsmroc • Optionally with insert shelf system for small batches _____ ⚙️ Intelligent control – just the way you need it ✅ PID control (optional) for precise temperature control ✅ Touchscreen control panel & smartphone control 📱 (optional) ✅ Weekly & monthly reports at the touch of a button (optional) ✅ Timer function: freely programmable from 10 minutes to 24 hours ⏲️ ✅ Automatic shutdown after the end of the process _____ ♨️ Ramp heating mode (optional) Precisely control temperature progression and holding times, e.g. E.g.: • Reach target temperature within a defined time • Maintain desired time • Controlled cooling to target temperature • Automatic notifications of process events _____ 🛡️ Safety is our priority 🟢 Safety sensors to prevent overheating 🟢 Automatic shutdown in the event of a fault 🟢 Acoustic warning signals in the event of errors 🟢 Solvent and fume removal via automatic venting _____ ⚡ Customized energy and heating system 🔥 Also available with an extension up to 400°C for high-temperature processes (optional) _____ 🧠 No repeated settings necessary! The furnace saves your process parameters – batch by batch. This saves you time and avoids errors. _____ 📢 And best of all: If you have special requirements – we also build customized furnaces according to your specifications! Contact our team of experts for a personalized consultation! _____ ☀️ 2-YEAR WARRANTY ☀️ Request more information

Condition: new, Year of construction: 2024, functionality: fully functional, ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Excellent Support! ✈️ Price includes shipping within Germany – No additional transport costs! ✈️ Fast delivery: Only 6 weeks after receipt of payment! PROFESSIONAL POWDER COATING HAS NEVER BEEN THIS EASY! Looking to expand your business and enter the world of professional powder coating? The PEF2.5+ is the perfect solution for beginners! This high-performance system allows efficient, cost-effective, and high-quality coating of car rims and smaller workpieces – with minimal effort! ✨UNBEATABLE PROMOTION – ONLY UNTIL THE END OF MAY!✨ Take advantage of this limited-time offer before it's too late! PONY Luxury Coating – QUALITY THAT CONVINCES! ✅ Plug & Play system – Delivered fully assembled, ready to use immediately! ✅ 100% European manufacturing – No China products, only top quality built to European standards! ✅ Modular & expandable – Additional options for greater performance and flexibility! ✅ All spare parts included – Long-term use with no hidden extra costs! ✳️Maintain your liquidity! We offer a variety of financing options to ensure your investment has the best chance of success. Contact us today. ✳️ ✨✨Buy directly from the manufacturer and secure price and quality advantages!✨✨ ☘️Environmentally friendly☘️⚡️Green Energy⚡️☘️ Powder oven + powder booth + powder gun Complete Starter Package PEF2.5+ Tedjwfhu Hepfx Amrjc ⭐ Powder oven with electric heating ✔️ INTERNAL WIDTH: 1,505mm ✔️ HEIGHT: 1,800mm (from air duct) ✔️ INTERNAL LENGTH: 2,500mm ✔️ Thermoblock unit dimensions: 785x1800x2210mm; heating capacity is 30 kW/h; recirculation fan is 1.5kW/h – 1 pc.; exhaust fan is 0.54kW/h. ✔️ Double-wing door with thermal insulation and silicone seal. ✔️ Guide rails for rack trolleys are manufactured according to the dimensions specified on the base plates. ✔️ Specially designed air duct for homogeneous air distribution inside the curing oven. ✔️ Electrical panel materials by Siemens and Schneider. This curing oven does not include a PLC system. PLC is available as an option. ✔️ Curing temperature, curing time, and heater unit function are adjustable. At the end of the program, an alarm and light signal from the buzzer will indicate completion. ✔️ Additionally, a product transport trolley with cast wheels is located inside the oven. ⭐ Powder coating booth ✔️ Dimensions: 800x1930x2200mm (including fan) ✔️ Teflon filters: 4 pcs. ➢ Filter suction fan: 4kW x 1 pc. (6,000m3/h – 200mmSS) ✔️ 36W LED lighting x 1 pc. ✔️ Bottom drawer x 1 pc. ✔️ Control panel for air intake and powder spray regulation ✔️ DELTA frequency converter ✔️ Heavy-duty rollers under the coating booth ✔️ Additional filter at the fan outlet ⭐ Powder coating gun E-Coat+3 Master with Multicolor (vibration table) Enquire now – Get your business ready for the future! ☀️ 2-YEAR WARRANTY ☀️ ☀️All our machines are CE-certified and necessary machines have ATEX certificates.☀️

Condition: used, Year of construction: 1989, O&K diesel forklift, 4-wheel, lifting capacity 6 tons, year of manufacture 1989 Todpfx Amoxxc Uxjroc

Condition: not inspected (used), Year of construction: 1985, PET-Filler, with 112 Filling valves, with 120 mm pitch, with 14-head screw capper make Alcoa für PCO 28 caps, already dismantled ex location for sale. Tjdsh Nq Tkepfx Amrec

Condition: new, functionality: fully functional, machine/vehicle number: 10200726, empty load weight: 410 kg, maximum load weight: 2,190 kg, overall weight: 2,600 kg, axle configuration: 2 axles, loading space length: 3,000 mm, loading space width: 1,500 mm, loading space height: 440 mm, Year of construction: 2026, Koch trailer, 125x250cm, 750kg, "Type U4" with a 150cm high cover. Passenger car trailer, Type U4, with a loading area of 125 x 250 x 150cm. Lightweight aluminum trailer with a permissible total weight of 750kg and a payload of 570kg, including a 10-year warranty. Koch-Anhängerwerke has been manufacturing high-quality trailers made in Germany for over 30 years. Special features: Double-walled, anodized aluminum side panel, 30mm (unique) Side panel with load securing system in V2A stainless steel (unique) Very stable tailgate latches made of V2A stainless steel (unique) Side panel fastening completely with 8 mm V2A stainless steel (unique) Four-sided lashing rail / railing on the lid (unique) 2x M16 threaded tension anchors / sturdy threaded rods at the rear (unique) Additional equipment: Tailgate easily removable Stable screen-printed floor panel, non-slip birch plywood, waterproof glued Axle and drawbar completely hot-dip galvanized, manufacturer ALKO Large 185/70 R13 tires, balanced and suitable for 100 km/h Steel sheet mudguards fastened with 8 mm stainless steel screws 12 Volt electrical system, 13-pole plug with reversing light 150cm high cover in gray Hook set mounted, hot-dip galvanized, also for net attachment Frame easily removable Other Vehicle registration document / registration certificate Part 2 Tedpfx Amei R Hw Herjc Accessories available at an additional cost, see below. If you would like to purchase this trailer or have further questions about trailers, please use our internal box trailer quote "No. U4-HP150-Offer".

Condition: refurbished (used), battery capacity: 620 Ah, battery voltage: 80 V, total height: 784 mm, total length: 1,025 mm, total width: 708 mm, Tested forklift battery for your truck – 80V 4PZS 620Ah – DIN A + 1-year warranty + Complete with aquamatic system + Includes end discharge device & REMA 320 connector (other plug types can be installed upon request) + Capacity: minimum 90–100% (C5 capacity protocol is provided with delivery) + Year of manufacture: 2024 Dimensions: Length: 1,500 mm Width: 708 mm Height: 784 mm Weight: approx. 1,600 kg Suitable for the following models and more: Linde E 20 - 325-00 Linde E 20 / 600 - 387-00 Linde E 20 / 600 H - 1252-01 Linde E 20 / 600 H - 387-00 Linde E 20 / 600 RH - 387-00 Linde E 20 H - 387-00 Linde E 20 HOCH - 325-00 Linde E 20 HOCH - 336-00 Linde E 20 P - 325-00 Linde E 20 Z - 325-00 Linde E 25 - 325-00 Linde E 25 - 336-00 Linde E 25 - 387-00 Linde E 25 / 600 - 387-00 Linde E 25 / 600 H - 1252-01 Linde E 25 / 600 H - 387-00 Linde E 25 / 600 RH - 387-00 Linde E 25 CH - 387-00 Linde E 25 H - 387-00 Linde E 30 CH - 387-00 Linde E 30 H - 387-00 Linde E 30 P - 325-00 Linde E 30 SH - 1276-00 Linde E 35 - 337-00 Linde E 35 - 337- Linde E 35 P - 337-00 Linde E 40 P - 337-00 Linde K - 5231-00 Linde K - 5231-00 – side battery change Linde K 12 - Linde K 15 - Linde P 200 - 370-00 Linde P 250 - 127-00 – vertical battery change Linde P 250 S - 127-05 Linde P 250 SWB - 5007-10 – side battery change Linde P 250 SWB - 5007-10 – vertical battery change Tsdpjy Rnrijfx Amrsc Still MX-X Still R. 07-25 Still R 60-20 Still R 60-22 Still R 60-25 Still RX 60-25 Still RX 60-30 Jungheinrich EFG 25 Jungheinrich EFG 425 Jungheinrich EFG 425 K Jungheinrich EFG V 25 Jungheinrich EKX 515 Jungheinrich EKX 515 K Jungheinrich EKX 525 K Jungheinrich ETX Toyota 7FBMF20 Toyota 7FBMF25 Toyota 8FBMKT25 Toyota 8FBMKT30 Toyota FBM25 Toyota FBMF20 Toyota FBMF25 Crown TSP 6000 - B Crown TSP 6000 - C Crown TSP 7000 Atlet EH 25 Balkancar EV715 Balkancar EV720 Clark GEX25 Heli CPD 30 Heli CPD 35 Hubtex MQ 40 Hyster E5XN Hyster J2.0 Hyundai 25BHA7 Mitsubishi FB25CN Nissan 1Q2L25Q Nissan QX25 Common battery sizes available on request. Transport available.

Condition: used, Year of construction: 2023, functionality: fully functional, Complete extraction system for the production line for log cutting LSH 350/4500. Commissioned in 01/2023. The equipment has no manufacturer, it consists of individual components. Configured based on calculations, documentation available. Tjdpfx Amexa Excsrjc

Condition: excellent (used), Year of construction: 2006, operating hours: 1 h, functionality: fully functional, K+G Wetter VCM 120 STL Condition like new, used only few times to try. The blades are never sharpened, in factory installed. Everything works. Machine length 2400 mm Machine width 2250 mm Tjdexpwc Sopfx Amrjc Machine height 1780 mm Machine weight 1650 kg Bowl Volume 120 liters

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, We offer a K+G Wetter vacuum cutter from 2007, with a bowl capacity of 120 liters, designed for intensive use in meat and food processing plants. This is a professional machine for mixing and emulsifying meat, meat fillings, and other products requiring a uniform texture. By operating in a vacuum, the cutter minimizes air incorporation into the mixture, which is crucial for producing products where the proper texture, color, and consistency are essential. This solution is particularly useful for producing meat fillings, emulsions, pâtés, spreads, and other food products requiring precise processing. Its compact dimensions of approximately 1750 x 1700 x 1650 mm allow for convenient placement of the machine in the production hall while maintaining high processing capacity. With a capacity of 120 l, this is a very practical model for companies seeking an efficient cutter for daily production. Todsy Tl U Tepfx Amrjc Technical specifications: Manufacturer: K+G Wetter Model: 505-1006 Machine type: vacuum cutter Bowl capacity: 120 L Year of manufacture: 2007 Power: 43 kW Current: 86 A Power supply: 400 V Frequency: 50 Hz Dimensions: 1750 x 1700 x 1650 mm Vacuum operation: yes Key advantages of the K+G Wetter cutter vacuum operation to minimize product aeration, 120-liter capacity for efficient production, high power of 43 kW, precise mixing and emulsification, process repeatability,

Condition: refurbished (used), total length: 2,200 mm, total width: 2,180 mm, total height: 2,100 mm, warranty duration: 6 months, overall weight: 2,200 kg, power: 36 kW (48.95 HP), year of last overhaul: 2023, K+G Weather MAW160 The machine is offered as overhauled. Feeding is included in the price. (On the pictures you can see a sample machine) Errors and prior sale reserved. All information is non-binding. The accuracy and correctness of the information and prices are not guaranteed. A warranty and / or liability is excluded. Tjdpfxop S Ndaj Amrec Until full payment, the machine remains our property.

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: MG006447C, fuel type: diesel, color: light blue, type of cooling: water, New 16kva diesel engine indoor generator Make/model: MCWEL MG20S-K Country of origin: China Rated output: 12kva / 50Hz Rated voltage: 220V Power factor: 0.8 Phase-wire: 1-phase/2-wire Engine make/model: Kubota D1703-E2BG Rate output: 12.8kW / 1500rpm Fuel consumption: 3.5L/hr / 100% load Tedpjvzmy Ijfx Amrec Dimension: L – 1,490mm x W – 700mm x H – 930mm Weight: 680kg

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 2,300 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 2,300 mm Travel range, Y-axis: 800 mm Todpfx Aoz Epg Ejmroc Travel range, Z-axis: 600 mm Work area, fixed table Work area, X-axis: 925 mm Work area, Y-axis: 800 mm Work area, Z-axis: 600 mm Clamping area: 1,400 × 750 mm Work area, rotary table Work area, X-axis: 780 mm Work area, Y-axis: 800 mm Work area, Z-axis: 600 mm Clamping area: 800 × 630 mm Tool holder: SK 40 Tool magazine: 30 positions Spindle speed: 50–12,000 rpm MACHINE DETAILS Control system: Heidenhain iTNC 530 Spindle: Kessler motor spindle EQUIPMENT 6th axis prepared Handheld control unit Internal cooling system with filter system Filter system: 500 l Chip conveyor Blum laser 2 extraction systems Machine hood

Condition: used, Year of construction: 1998, Manufacturer: Gernal Todpfx Amez Ei E Ijrsc Model: HBV-K-M-250 Year: 1998 Condition: Used Serial Number: 98/00659 Stock Number: 3440 Volume: 4000 litres Capacity: max 2000 kg Diameter opening: 600 mm Vacuum pump; Busch, RA 0063 Power: 3 x 380V, 50Hz, 4.8kW Dimensions: 3850 x 1550 x 2200 mm With Mikster MCM 023 controls. With hydraulic tilting system at backend to lift 150 mm for easy unloading.

Condition: good (used), axle configuration: 2 axles, first registration: 12/2015, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,300 mm, total length: 9,810 mm, total width: 2,550 mm, total height: 3,800 mm, suspension: air, tire size: 385/65R22,5, color: other, Year of construction: 2015, Equipment: ABS, tail-lift, = Additional Options and Accessories = - EBS - Tail lift = Notes = Number of axles: 2, Tare weight: 5560 kg, Gross vehicle weight: 18000 kg, Chassis type: Full chassis, ABS, EBS, Axle type: BPW, Tail lift, Tail lift design: Rear door, Load capacity of the tail lift: 2000 kg, Tail lift manufacturer: Bar cargolift, Tail lift material: Aluminum, Tail lift size: 230x252, Battery for loading ramp, TAILLIFT // LOADING PLATFORM // BEVERAGES = Additional Information = General Information Cab: Day cab License plate: KLEYN1 Drivetrain Fuel type: Diesel Transmission Transmission: Manual transmission Axle Configuration Tire size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Tire tread depth left: 7 mm; Tire tread depth right: 8 mm Axle 2: Tire tread depth left: 11 mm; Tire tread depth right: 11 mm Weights Tare weight: 5,560 kg Payload: 12,440 kg GVW: 18,000 kg Functional Tail lift: Bar cargolift, Rear door, 2000 kg Height of the loading platform: 128 cm Environmental Emission class: Euro 0 Condition Technical condition: good Optical condition: good Damage: Damaged vehicle (not roadworthy) = Company Information = Kleyn Trucks is one of the largest independent used vehicle dealerships in the world. Here, you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? It’s simple! Todpfx Aoymwvujmroc • Large, rapidly changing stock • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Support for import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and submit a request via our website. Ask directly about our European warranty package.

Condition: used, ELB BD 12 NC-K Surface Grinding Machine (1998) Upgraded in 2019 3,000mm maximum travel Tsdpfx Asz Hl Rpjmrjc 1,200x600mm table size 580mm maximum workpiece height 20kW main spindle power 2,900rpm spindle speed 1,200x600mm magnetic chuk ± 0,05mm surface tollerance

Operating hours: 23,000 h, condition: excellent (used), machine/vehicle number: 6458804, SY2DFEE-30/140-140/01309231-01309231-K Tjdpfx Ameucddusrsc

Condition: like new (used), functionality: fully functional, Year of construction: 2025, operating hours: 800 h, power: 5.5 kW (7.48 HP), first registration: 12/2025, color: grey, Dry hay, biomass, or a drying container with an air volume that you set yourself, instead of running a fan at full speed and paying for it. This Karl Barth AG Ventomat SE-1-100-4p was purchased in December 2025 and used for approximately four months. It operates perfectly and is offered as a complete, ready-to-use system, not just the fan: it includes a factory-configured 5.5 kW Invertek Optidrive E3 frequency inverter with disconnect switch, duct cone and reduction, plus a free 10m Ø400mm fabric hose. The original purchase price was approximately CHF 8,507. Only one unit is available – sold as a complete set with the inverter, ducting accessories, and hose. Once sold, it's gone. Best for: hay drying, biomass drying, drying containers, and agricultural ventilation where you want to control air volume rather than running at full speed. Not suitable for: corrosive or heavily dust-laden air streams, or ATEX zones unless independently verified. What the specifications mean in practice: • 5.5 kW motor, 4 kW rated fan output – sized for continuous hay/biomass drying, not short bursts. • Factory-configured Invertek Optidrive E3 inverter – set the air volume to match the crop and its moisture content, reducing energy consumption. • Inverter in IP66/NEMA4X housing with disconnect switch – can be mounted in a dusty barn without a separate control cabinet. • Duct cone 222/563 to D400mm and D750/D600mm reduction – connects to existing ducting, eliminating the need for custom fabrication. • 10m Ø400mm flexible fabric hose included – place the fan where it fits, and duct air where needed. • Painted sheet metal, single-suction Swiss-made (Karl Barth AG) – serviceable and locally supported. The complete package includes: Ventomat fan, Invertek Optidrive E3 5.5kW inverter with disconnect switch, duct cone 222/563 to D400, duct reduction D750/D600 with flange ring, and a 10m Ø400mm fabric hose, all at no extra charge. Purchasing/configuring the inverter alone is a significant separate expense. Technical data: – Manufacturer: Karl Barth AG, Dättlikon (CH) – Type: Ventomat SE-1-100-4p – Rated output: 4kW – Motor: 5.5kW, 4-pole – Construction: Painted sheet metal, single-suction – Inverter: Invertek Optidrive E3, ODE-3-340140-3F4B, 5.5kW, IP66/NEMA4X – Inverter input: 380-480V, 3-phase, 17.2A – Inverter output: 0-480V, 3-phase, 14.0A, 7.5HP Todpfxjzrzizj Amrjc – Duct connection: 222/563mm to D400mm, plus D750/D600mm reduction Condition: Barely used (~4 months), technically flawless, fully functional. New price (Dec 2025) CHF 8,507.45 incl. VAT. Location: Stanserstrasse 50, 6064 Kerns (self pick-up; transport can be arranged). Buy with confidence: purchased in Dec 2025, used for ~4 months for hay drying/drying container, technically flawless. The inverter can be demonstrated running under load; photos of the nameplate and a video of it running are available. In-person inspection in Kerns OW by appointment. Why buy now: near-new, factory-configured Swiss unit sold as one complete set – fan, inverter, cone, reduction, and hose stay together. Once sold, this configuration will not be available again at this price. First-buyer bonus: free functional test with the inverter under load, plus loading assistance, at no extra cost. Valid until October 10, 2026, or until sold. Action: send your intended application, required capacity, and destination – we'll confirm suitability and provide a transport estimate.

Condition: used, Year of construction: 1990, bore capacity in steel (diameter) 32 mm throat 300 mm bore stroke 140 mm taper MK 3 MK table-size 380 x 360 mm feeds über Handrad turning speeds 85 - 1100 U/min total power requirement 1,3 KW weight of the machine ca. 0,27 t Todpfx Amjy N D Hyjrsc dimensions 0,95 x 0,6 x 1,92 m Pillar drill with: - Feed via handwheel - Spindle speeds via belt drive

Condition: used, mileage: 29,000 km, power: 130 kW (176.75 HP), first registration: 02/2022, fuel type: diesel, overall weight: 7,490 kg, gearing type: automatic, number of seats: 3, loading space length: 4,010 mm, loading space width: 2,360 mm, loading space height: 400 mm, Equipment: ABS, air conditioning, central locking, We are delighted that our offer has sparked your interest, and we assure you that you can purchase a good and affordable vehicle with a verifiable service history at our dealership! TOW HITCH, TYPE MAUL TOW HITCH, BALL TYPE SERVICE HISTORY AVAILABLE! MAIN INSPECTION (TÜV) – NEW! Vehicle Highlights: * Rear axle differential lock * Lane keeping assist * Active Brake Assist Engine: * Engine OM934, R4, 5.1 l, 130 kW (177 hp), 750 Nm * High-Performance Engine Brake Axles / Suspension / Steering: * Rear axle, 6.2 t * Rear axle differential lock * Leaf spring suspension, rear axle Braking System: * Trailer brake, 2-line Frame: * Plastic tank, 120 l * AdBlue tank, 25 l * Tow hitch * Tow hitch Exterior Cab: * S-cab * S-cab * Rear cab wall, with window * Exterior sun visor, transparent * Front mirror, heated * Main mirror, electric, driver's side Body: * Three-way tipper, 4000 x 2300 x 400 mm * Cargo area (LxWxH): 4000x2360x400 mm Interior Cab: * Side roller blind, driver's side Air Conditioning: * Air conditioning Seats: * Driver's air-suspended seat, standard * Middle seat, with 3-point safety belt Electrical / Electronics: * Power windows, electric, on both sides * Rain sensor * Daytime running lights * Fog lights * Lane keeping assist * Active Brake Assist * Cruise control Other Equipment: * Body by Meiller, tow hitch, ball type, tow hitch, type MAUL Ø 40, GERMAN VEHICLE REGISTRATION / CUSTOMS SERVICE We will organize your registration and the export documents / EUR 1 and manufacturer's declaration for export. Tedsz Hth Ajpfx Amrsc FINANCING Upon request, we will gladly provide you with a LEASE-PURCHASE or FINANCING offer. SERVICE TÜV / UVV LBW / LGS inspection / Tachograph check / Installation of OBU device and service by our AUTHORIZED WORKSHOP before departure. TOLL / ROAD CHARGES Toll can be booked on-site. ARRIVAL / DISTANCES Wittlich train station is 500 m away Frankfurt Airport is 150 km away Frankfurt-Hahn Airport is 40 km away Luxembourg Airport is 75 km away Sale in accordance with our general terms and conditions. The information on the internet is a non-binding description. It does not constitute guaranteed characteristics. The seller is not liable for typographical and data transmission errors. VEHICLE LOCATION: Dr. Oetker Str. 22 / 54516 WITTLICH-Wengerohr.

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 500 x 310 band speed 15 - 100 m/min table height 844 mm dimensions of saw-band 4250 x 34 x 1,1 mm total power requirement 2,2 kW weight of the machine ca. 1,2 t dimensions of the machine ca. 1,4 x 2,4 x 1,935 m ACTION PRICE!!! 2-column double miter band saw K-tech DG 50/33 HA-I • 2-column miter saw Todpfx Asfg E Hlomrjc • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to bevel cut, feed controller + cutting pressure controller • Massive material infeed roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to bevel cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large dimensioned wheels (520 mm) a. • Clear miter setting up to 60° Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: used, power: 220 kW (299.12 HP), first registration: 03/2026, fuel type: diesel, overall weight: 16,000 kg, fuel: diesel, brakes: retarder, gearing type: automatic, suspension: steel, Equipment: ABS, air conditioning, airbag, central locking, navigation system, onboard computer, power assisted steering, soot filter, E8B USB port, D6F air conditioning, D1M fixed passenger seat, simple, J1S tachograph manufacturer VDO, C7H side safety device, D4W electric window regulators on both sides, U3M 2nd generation electronic architecture, X2A type designation according to weight variant, P4K 4 mm HBW 450 floor, J5S radio with USB port and Bluetooth, Y1G assignment of cab paintwork, top coat line 2, G5G Mercedes PowerShift 3, D4Y driver's side sun blind, G5Y digital tachograph calibration ex works, P3J MEILLER TRIGENIUS D210 4, 2 x 2, 38 x 0, 5 m, E0Y battery cover, K5S protective cap for AdBlue dosing system, C6Y rear axle stabilizer under frame, X4S ATS warranty according to terms and conditions 4th year/340,000 km, Q8Z crossmember subsequent installation of AHK G145 ZAA, O3K Active Safety, L1Z white indicator lenses, M4X engine version Euro VI E, F8E locking system with central locking, D3Q driver's seat upholstery velour, I6B tipper chassis, P0D factory tipper Meiller, B5B trailer brake 2-line, R0N tires as per customer requirements rear axle, X4H instruments/signage/manuals in German, D2V armrests on both sides of driver's seat, C6D ZF 8098 steering, S1H lane departure warning, S2H Active Sideguard Assist 2, A1L front axle 6,1 t, K7I exhaust system on right frame, tailpipe inward, U3W ICUC hardware Gen6., K0E plastic tank 120 l left, S1O traffic sign assist, V9G technical changes model year October, B2A disc brakes on front and rear axle, Z5Y vehicle for right-hand traffic, Q2H rear springs 10.5 t parabolic, Q7S trailer coupling G 145&. You can reach us by phone Monday to Friday until 8:00 pm and Saturday until 4:00 pm!! Further information: Todpfx Aoy Ecq Ajmrjc Leasing/financing and trade-in possible!! Errors and prior sale excepted!! All information without guarantee ... more on our homepage

Condition: used, functionality: fully functional, Year of construction: 1990, Type: Liebherr 35 K Factory No.: LA13963 Undercarriage Boom, max. (m) Lifting capacity: 33 m / 1 ton Boom, min. (m): 11.40 m Hook height: 11.7 / 20 / 22-26 m Maximum lifting capacity at: 3.50 t Ground footprint (outriggers): 3.8 x 3.8 m Slewing radius: 3.00 m Power supply: 63 A (22.6 kVA) "Transport and assembly requirements (approx.) (up to 50 km transport radius)": Loading crane, axle 1 truck + trailer Counterweights (tons) for transport: 17.00 t Tedpfxjz Hu N Uo Amroc Year of manufacture: 1990

Condition: used, mileage: 52,672 km, power: 125 kW (169.95 HP), first registration: 06/2025, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, number of seats: 3, total length: 6,946 mm, total width: 2,345 mm, total height: 2,280 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, tail-lift, Vehicle number: 263385 Tsdpfsz H Hcmsx Amroc 1st owner, accident-free, regularly serviced according to maintenance schedule, non-smoker ---- HIGHLIGHTS & PACKAGES * Winter package * Charging package, dashboard * Smoker package ASSISTANCE SYSTEMS * Active Brake Assist * Mercedes-Benz emergency call system * Breakdown management * Traffic sign assistant * Active Lane Keeping Assist * Rain sensor * ATTENTION ASSIST * Headlight assistant * ECO Start-Stop function * Cruise control * Crosswind assist ENGINE, TRANSMISSION & CHASSIS * 6-speed manual transmission ECO Gear AUDIO & COMMUNICATION * Digital radio (DAB) * MBUX multimedia system * Communication module (LTE) for digital services * Instrument cluster with color display INTERIOR * Multifunction steering wheel * Steering wheel adjustable in inclination and height * USB socket 5 V * Switch for special signals in the cockpit * Socket in the cab * Pre-installation for electrical system, configurable special module * Storage compartment above the windshield * Cup holders in the front * Folding cover for storage compartment * Storage compartment under the cockpit * Seat heating for front passenger * Seat heating for driver * Semi-automatic controlled air conditioning system TEMPMATIC * Climate zone 1 (cold/comfort) * Speedometer km/h * Comfort roof control panel * Armrest for driver's seat * Passenger seat for two people * Grab handle for inside seat in the case of a two-person seat * Airbag driver * Airbag passenger * Comfort driver's seat * Grab handles for entry for driver and passenger * Rear wall cladding * All-weather floor mats * Fabric Maturin black * Digital operating manual LIGHTS & VISIBILITY * Outline lights * Turn signal lights, side, front * Adaptive brake light * LED High Performance headlights * Mirror head, large TECHNOLOGY & SAFETY * Hill-start assist * Parking brake, electric * Jump-start contact * Anti-theft alarm system * Seatbelt warning system for passenger seat * Seatbelt warning system for driver seat * Outside temperature display * Gear shift indicator * Seat occupancy recognition, driver's seat EXTERIOR * Exterior mirrors, heated and electrically adjustable * WET WIPER SYSTEM * Exterior mirrors without turn signal indicators * Thermally insulated glass with band filter on the windshield * Side marker lights * Rear crossmember, bolted * Towing eye, rear * Acoustic package * Arctic white OTHER EQUIPMENT * Front axle with increased load capacity * Stabilization level I * Vibration damper * Battery main switch, single-pole * Separating relay for additional battery * Electrical system for trailer socket * Vlies battery 12 V 92 Ah * Pre-installation for electrical system, reversing assistance * Chassis with cab * Basic * Head unit Europe/CIS countries/Mongolia * 3.5-ton vehicle * Exhaust gas purification SCR generation 4 * Rear lamp wiring harness, extended * Europe * Generator 14 V / 250 A * Vehicle capable of running on HVO * Engine version Euro VI * Longitudinal member reinforcement * Registration certificate, part II, prepared * Manufacturer Mercedes-Benz AG * Without weight adjustment 3,500 kg * Noise reduction measures * Mercedes-Benz MobiloVan with roadside assistance and extended warranty * Signage / printed materials in German * Minimum reference weight of 2381 kg required * Control code conversion WLTP * Country version EU - EFTA - UK * Manufacturing Ludwigsfelde * Additional bodywork measures * Control of registration documents during input of delta weight Further features

Condition: refurbished (used), battery capacity: 620 Ah, battery voltage: 48 V, total height: 784 mm, total length: 1,035 mm, total width: 443 mm, Tested forklift battery for your forklift – 48V 4PZS 620Ah – DIN B + 1 year warranty + Includes Aquamatic system + Includes end discharge cables & REMA 320 connector (other connectors can be fitted on request) + Capacity: min. 90–100% (C5 capacity protocol will be provided upon delivery) + Year of delivery: 2024 Dimensions: Length: 1,035 mm Width: 443 mm Height: 784 mm Weight: approx. 960 kg Suitable for the following models and others: Linde A (1120) - 52-00 Linde K - 5231-00 Linde K - 5231-00 - side extraction Linde K 10 Linde K 10 - vertical extraction Linde K 12 Linde R 10 N - 1120-00 Linde R 10 N - 1120-00 - front extraction Linde R 12 N - 1120-00 Linde R 12 N - 1120-00 - front extraction Linde R 12 N - 136-00 Linde R 14 - 1120-00 Linde R 14 - 376-00 Linde R 14 N - 1120-00 - front extraction Linde R 14 N - 1120-00 - vertical extraction Linde R 14 S N ACTIVE - 115-12 Linde R 14 SN - 115-08 Linde R 14 SN - 115-08 - vertical extraction Linde R 16 AS 1140 - 1120-00 Linde R 16 N - 1120-00 Linde R 16 N - 1120-00 - front extraction Linde R 16 N - 113-00 Tedpfx Asy Rnizsmrsc Linde R 16 N - 115-00 Linde R 16 N - 115- - vertical extraction Linde R 16 N HD - 1120-00 - front extraction Linde R 16 SN - 115-08 Linde R 20 - 1120-00 Linde R 20 N - 1120-00 - front extraction Linde R 20 N - 113-00 Linde R 20 SN - 115-08 Linde V 10 E - 14 - vertical extraction Linde V 10 E Linde V 12 E - vertical extraction Linde V 12 E - vertical extraction Still EK 11 Still FM 14 N Jungheinrich EKS 312 Jungheinrich ET 214 Jungheinrich ET 216 Jungheinrich ETM 214 Jungheinrich ETV Jungheinrich ETV 112 Jungheinrich ETV 216 Jungheinrich ETV Q Jungheinrich ETV Q 20 Jungheinrich ETV Q 25 Crown ESR 5220 Crown ESR 5220-1.4 Crown ESR 5220-1.6 Caterpillar NR16N2C Hyster K1.0H Steinbock-Boss WR 16 Other common battery sizes available on request. Transport possible.