Used 1993 Berkefeld for sale (233)

Condition: excellent (used), Year of construction: 1992, Manufacturer EVG Type TSD 7-25 Machine No. 958 Year of manufacture 1993 Working direction L > R Beam types KT 8… Beam height (mm) 90-250 Carrier length min. (mm) max. (mm) 14,000 Fixed lengths: Yes Cutting pitch (mm) 100/200 Spool unwinder (pcs.) 5 Podpfxswp Ilys Amyopw LAR: Yes Wire diameter - 5-12 mm smooth/ribbed Diagonal - 4-7 mm smooth / ribbed Stack height max. (mm) - 500

Year of construction: 1993, condition: reconditioned (used), year - 1993 / 2020 complete reconditioned with new PLC Management Ppodpfx Amoiau Uujyjw tube diameter max. 100 mm wall thicknes - 10 mm pull up length of tube - 6000 /12000 mm Mandrel pipe bending up to 4 mm pipe wall thickness and pipe bending without mandrel from 5.0 - 10 mm pipe wall thickness accuracy of bending angle ± 0,2 ° total power requirement - 50 kW weight of the machine ca. 6 t

Condition: excellent (used), Year of construction: 1995, Combination Unit: Manufacturer: GSG Feeder: Type: 840.02-027 Crusher Descaler: Type: 663.02-017 Wire Range: Ø5.5-16mm For wire rod with approx. 40-60 daN/mm² strength Crushing and Bending Rollers: Carbide Inserts Adjustment with 0.37 kW - 1.15 A gear motor Brush Drive with 0.25 kW gear motor, n=293 rpm Connection Voltage: 380-420 V 50 Hz Dry Coating Unit: Type: BSG/T Filling: Calcium Stearate (e.g., Traxit Type: D S 51 E) Stearate Consumption: approx. 350 g per t of wire Drawing Speed: max. 15 m/s Electrical Power: 2x 0.55 kW gear motors Cassette: 2 slots (supplied with 1x roller block + 1x cassette) Type: PKG/T (TS) Cleaned rolled wire Wire strength approx. 40–60 daN/mm² Wire range max. inlet diameter 9.5mm, finished diameter 3.5–8.5mm Roll dimensions min. Ø115mm, max. Ø125mm, Bore diameter Ø82mm, width 15–25mm Cooling pin diameter 25mm Cooling water consumption approx. 600 l/h Drawing machine: Manufacturer: Koch Type: KHZ 5000 Year of manufacture: 1993 Serial number: 13.821 Number of draws: 1 draw per block Drawing drum: Ø700mm Tensile force: mechanical 5000 N Wire material: mild steel wires Run-in strength: approx. 40 – 45 daN/mm² Maximum drawing range: Inlet diameter 5.0 – 8.5mm Cross-section reduction: 20 x 25% (mechanical gradation) Drawing speed: up to max. 7.0 m/s Brake: Twiflex, type: MRB Drive: AC motor/frequency converter, Siemens PN=110 kW, n=1485 rpm Ppjdpfx Aer Nfvmsmyow Spooler: Manufacturer: Koch Type: KHS 1250 Year of manufacture: 1993 Factory No.: 13741 Wire diameter: 5 – 8.5 mm Strength: approx. 55 – 70 daN/mm² Winding speed: V=7 m/s, adapted to the drawing machine Filling weight: approx. 3000 kg Spool drive motor: Three-phase motor with external fan Type: 1 PQ 6253 – 6 AA 70- Z A 15 + K 20 + C 14 + H 46 P=37 kW, n=1000-2000 rpm, IP54, design B3 Laying drive motor: 66-671U, 1.5 kW, 170 V, 9.8 A, 1680 rpm, IP 44, B5-200 With Attached tachometer generator TG 20, 20 V / 1000 rpm With attached spur gear SK 32, i=57.53, design B6 Hydraulics: Hydraulic excavator type: H13 AK Pneumatics: Twiflex disc brake type: MRB Pneumatic cylinder type: SPWG 28032-25mm stroke Dimensions: 3100 x 3000 x 1700 mm (L x W x H) without counterweight

Year of construction: 1993, condition: used, Manufacturer: Hosokawa Bepex Model: PCS-10 (Pulvocron) Year : 1993 Type: Air classification mill / Microniser Podpfx Amezbynvjyspw Nominal capacity: 10 kg/h Brabender screw feeder Product filtration and collection cyclone + pneumatic cleaning Explosion-proof safety valve Rotary air/product seal valve Mikropul 12-6-30 receiver filter: Product collection hopper with fine particle separation Internal dimensions: Ø 90 cm x 530 cm Lubrication unit with a pump Steam sterilisation Plan a new electrical installation (This request is subject to an additional quote) Full technical documentation + paper drawings Product outlet hopper capacity: 200 kg – 1,100 litres

Condition: excellent (used), Year of construction: 1993, CNG Tank Gas Methane Trailer Natural gas 200 Bar Manufacturer: SAMRO Year: 1993 Tare: 6900 kg We also have other tanks for LIN, LOX, LAR, LNG and CO2, argon, oxygen, nitrogen and carbon dioxide, Hydrogen, Methane Podpfxst D Apto Amyepw We would also be happy to provide you with a quotation or give you more information about other pressure vessels.To discuss the possibilities, please contact us by phone or e-mail.

Condition: used, Year of construction: 1993, machine/vehicle number: 315 AE 0643 V 02 85, ACMA DM82 – Single-Blade Rip Saw (Délingeuse monolame) The ACMA DM82 is a robust French single-blade rip saw for professional longitudinal splitting of boards and strips in sawmills and woodworking shops. Featuring hydraulic feed and INRS safety approval (Visa No. 315 AE 0643 V 02 85) from 1993, it is ideal for precise wood cutting up to 160 mm height. Cutting length: 4000–5200 mm Cutting height: 140–160 mm Cutting width: 370–600 mm Saw blade Ø max.: 600 mm (min. 450 mm) Saw motor power: 9–13.2 kW (12–18 HP), 380 V 3~ Psdpfxoyrnxkj Amyepw RPM: 3000 rpm Hydraulic motor: 2.2 kW Table height approx.: 820 mm Dimensions (L×W×H): 4800–6600 × 1500–2300 × 800–1500 mm Weight: approx. 1350 kg

Condition: excellent (used), Year of construction: 1993, travel distance X-axis: 750 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, total height: 2,690 mm, total length: 2,230 mm, total width: 2,360 mm, load capacity: 340 kg, mount diameter: 200 mm, rapid traverse Z-axis: 1 m/min, rapid traverse X-axis: 1 m/min, rapid traverse Y-axis: 1 m/min, spindle speed (max.): 7,500 rpm, spindle speed (min.): 10 rpm, Micron VCE 750 – Despite its age, the machine is in excellently maintained condition and has only been operated in single-shift use. Manufacturer: Mikron Model: VCE 750 Year of manufacture: 1993 Control: Mikron CNC (Haas) Travel: X = 750 mm Y = 400 mm Z = 500 mm Spindle speed: 10 – 7,500 rpm Drive power: 7.5 kW Spindle Tool holder: SK 40 Tool changer: 20 tools Rapid traverse: 12.7 m/min Max. feed rate: 5.0 m/min Worktable: 356 x 914 mm clamping surface Max. table load: 340 kg Pjdpsp Sq Trsfx Amyspw Weight: 3,620 kg Dimensions: 2,230 x 2,360 x 2,690 mm (L x W x H)

Year of construction: 1993, condition: good (used), For sale from stock location: Albert-Proeller-Straße 9a, 86675 Buchdorf Deburring Drum K20 (Year of manufacture: 1993) • Manufacturer: Bruno Kraft • Model: K20 • Machine Type: Deburring Drum / Vibratory Finishing Drum • Year of Manufacture: 1993 • Application Areas: Deburring, edge rounding, descaling, removal of scale, surface improvement of small workpieces Technical Data Drum • Drum volume: approx. 20 l • Drum diameter: approx. 400–450 mm • Drum width: approx. 250–300 mm • Drum material: steel, internally rubber-lined or PU-coated • Lid: bolted, with gasket Drive • Motor power: 0.25–0.55 kW (typical for K20 series) • Speed: approx. 30–60 rpm • Type of drive: direct or belt drive (depending on year of manufacture) Processing Parameters • Max. workpiece size: approx. 80–120 mm Pjdpfjyr I Npsx Amyspw • Typical fill quantity: 10–15 kg of media plus workpieces • Suitable media: ceramic, plastic, porcelain, steel media • Processing operations: o Deburring o Edge rounding o Descaling o Removal of scale Dimensions and Weight • Length: approx. 700–900 mm • Width: approx. 500–600 mm • Height: approx. 700–900 mm • Weight: approx. 80–120 kg

Condition: used, mileage: 18,000 km, first registration: 12/1993, fuel type: gasoline, axle configuration: 4x2, color: red, gearing type: mechanical, total length: 5,230 mm, total width: 1,970 mm, total height: 2,260 mm, Year of construction: 1993, Empty weight: 2.260 kg MERCEDES 310 1993 EX DUITSE BRANDWEER , DUITS KENTEKEN. PERFECTE TOESTAND WERKELIJK ALS NIEUW. Psdpfx Ajy Uwxyemyjpw

Condition: repair required (used), Year of construction: 1993, operating hours: 40,042 h, functionality: limited functionality, machine/vehicle number: 1009, turning diameter over cross slide: 345 mm, turning length: 1,000 mm, turning diameter: 550 mm, spindle bore: 80 mm, spindle speed (max.): 3,200 rpm, spindle speed (min.): 50 rpm, travel distance X-axis: 285 mm, travel distance Z-axis: 1,070 mm, spindle motor power: 34 W, rapid traverse X-axis: 10 m/min, rapid traverse Z-axis: 15 m/min, rotational speed (min.): 50 rpm, rotational speed (max.): 3,150 rpm, total height: 2,180 mm, total length: 5,755 mm, total width: 2,350 mm, type of input current: AC, overall weight: 7,500 kg, chuck outer diameter: 315 mm, Equipment: rotational speed infinitely variable, Traub TND 550, year of manufacture 1993 Operating hours: approx. 40,000 h The machine is currently in daily use and is generally functional. The following known defects exist: Gear shifting is not functioning. The machine is permanently in gear 2 (speed range up to approx. 3,200 rpm). Driven tools are not functioning. The tailstock is operated via an added toggle switch. Pjdpfxezd Udis Amyspw The turret only moves or changes position at a very slow speed. The ball screw of the X-axis causes running noises. The ball screw has exhibited the aforementioned running noises since the machine was purchased in 2021. Despite this, H7 fits could still be reliably manufactured. The cause of the aforementioned defects has not been conclusively investigated. Information on possible causes of the defects is therefore provided without guarantee. The machine is sold as used, with the exclusion of any warranty for the mentioned defects as well as any other possible defects.

Condition: defective spare-parts repository (used), Year of construction: 1993, machine/vehicle number: 208712, functionality: not functional, pressing force: 150 t, table length: 3,550 mm, oil tank capacity: 390 l, Folding press EHT EHPS 15-35 150 t | 3,550 mm | Year of manufacture 1993 | Cybelec DNC 880 | incl. tool package For sale is a robust hydraulic EHT folding press, type EHPS 15-35, manufactured in 1993. The folding press has a working length of 3,550 mm and a pressing force of 1,500 kN or approximately 150 t. It is equipped with a Cybelec DNC 880 control system. The scope of delivery includes a comprehensive package of upper and lower tools as well as special tools. Important note regarding the current condition: The machine can be started. However, an error appears during the initialization of the stops, which means that bending cannot be performed at the moment. The error needs to be bypassed or professionally repaired. After this error has been resolved, the machine should be operational again. Therefore, it is being sold explicitly as a used, repair-required industrial machine for restoration. The machine is in used condition, commensurate with its age. Signs of use, paint damage, and dirt are present; see pictures. Technical data: • Manufacturer: EHT Werkzeugmaschinen GmbH • Model / Type: EHPS 15-35 • Machine number: 208712 • Year of manufacture: 1993 • Pressing force: 1,500 kN / approx. 150 t • Working length: 3,550 mm • Control system: Cybelec DNC 880 • Oil quantity: 390 l • Power supply: 3~ • Frequency: 50 Hz • Operating voltage: 380 V • Control voltage: 220 / 24 V • Rated current: 50 A • Main fuse: 80 A • Electrical wiring diagram no.: 111002 Safety system: • System: Press safety system Starkstrom Gummersbach • Delay time: 66 ms • Delay distance: 9 mm • Safety distance: 105 mm Inspection / Collection: The machine is located in an industrial hall and can be inspected by appointment. Dismantling, loading, and transport will be arranged or carried out by the buyer. Assistance with organization can be offered if required. Ppsdpfx Aezd Sc Asmyjw Sales note: No guarantee, no warranty, no returns. Subject to prior sale and errors. All technical specifications have been compiled to the best of our knowledge based on the nameplates and available information.

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, input voltage: 230 V, measuring range X-axis: 200 mm, measuring range Y-axis: 85 mm, measuring range Z-axis: 50 mm, total width: 483 mm, total length: 598 mm, total height: 464 mm, overall weight: 64 kg, input current: 5 A, repeat accuracy: 0.005 mm, input frequency: 50 Hz, Equipment: CE marking, USB port, documentation/manual, type plate available, PG1000-400 – Optical system for inspecting the geometry of rotating cutting tools PG1000-400 is a professional optical measuring and inspection system for quickly checking the geometry of cutting tools. It is designed for tool manufacturers, sharpening shops, grinding shops, tool rooms, CNC machining centers, and quality control/metrology departments. Pjdozdz S Topfx Amyjpw Its main application is the inspection of rotating cutting tools after manufacturing, grinding, sharpening, or reconditioning. The system is suitable for HSS and solid carbide tools, especially drills, end mills, step drills, reamers, taps, form tools, micro tools, and custom-made tools. The device can also be used to inspect carbide inserts, selected thread geometries, screws/bolts, and other precision parts, provided that the geometry being inspected is optically accessible to the camera. The system's primary focus is on the inspection of cutting tool geometry. Typical applications: - In-process inspection directly at the grinding machine or in production - Incoming and outgoing inspection of tools - Inspection after sharpening/regrinding - Quality documentation and measurement reports - Repeated inspection of serially produced tools PG1000-400 allows for the inspection of, for example: - Rake angle and clearance angle - Helix angle - Point angle for drills - Radii and corner radii - Diameters and distances - Cutting edge length - Land width, margin width, facets - Web thickness - Tool profile - Runout - Condition and wear of the cutting edge - Comparison of geometry with DXF/DWG drawings The system operates optically and non-contact. This is advantageous when inspecting sharp edges, fine microgeometries, coated tools, and precise edges, where speed, repeatability, and minimizing operator influence are important. The system includes REACTION software, developed specifically for the inspection of cutting tools. The software offers more than 50 measuring functions, edge detection, automatic alignment of measuring points to the edge, saving inspection scenes, comparison with DXF/DWG geometry, PDF reports with PASS/FAIL evaluation, and data export to Excel/CSV. Technical specifications: - Recommended tool diameter: 0.635–75 mm - Tool measuring length: approx. 190–200 mm - Magnification range: 12.5× to 145× - Camera: 5 MP - Monitor: 27" 4K Ultra HD - Measuring range: 85 mm vertically × 200 mm horizontally - Accuracy/repeatability: ±5 µm at maximum magnification - Device dimensions: approx. 598 × 483 × 464 mm - Weight: approx. 64 kg Offered configuration: - PG1000-400 optical cutting tool inspection system - M / F / A encoders - PC with REACTION software - 27" 4K Ultra HD monitor - Flexible LED lighting with diffuser - Curved magnetic diffusion plate - Rotating base block for clamping fixtures - 1000-026-5"-ASS – 5" V-block assembly with insert, top clamp, and stop - Basic remote operator training About the manufacturer: PG1000 is based on the long-term development of systems for inspecting cutting tools. The first generation of PG1000 was introduced in 1993. The system is manufactured in the USA by PG Inspection Technologies LLC, which specializes in this product line. Since 1996, more than 1000 PG1000 systems have been delivered. Condition and delivery: - New machine - Year of manufacture: 2026 - Warranty: 12 months - Location: Czech Republic / EU - Delivery, assistance with commissioning, and training according to agreement - CE marking and relevant EU documentation The device i

Condition: ready for operation (used), Year of construction: 1993, control type: NC control, working width: 2,040 mm, sheet thickness steel (max.): 6 mm, overall weight: 6,000 kg, total length: 2,800 mm, total width: 3,400 mm, total height: 2,100 mm, Hydraulic swiveling bending machine Manufacturer: FASTI, Type: 212 – 20 – 6 Year of manufacture: Dec. 1993 / Jan. 1994 Technical data Psdpfxeza D Eis Amyjpw Manufacturer: Fasti Type: 212-20-6 Year of manufacture: Dec. 1993 / Jan. 1994 Working length: 2040 mm Sheet thickness: 6 mm Stroke: 300 mm Connected power: 12.42 kW Voltage: 400 V Number of phases: 3 Control voltage: 230 V AC // 24 V DC Rated current: 16.5 A Mains frequency [Hz]: 50 Installation dimensions: L 3.35 x W 2.80 x H 2.10 m Weight: approx. 6 t Equipment - Bending angle adjustment using a potentiometer and digital display - Sheet thickness adjustment (bending flange) using a button and digital display - Controlled back gauge (1000/1500 mm) with ball bearings - Sharp edge guide - Bending guide All information is subject to change without notice. The machine is particularly distinguished by its very simple operation. A demonstration is possible at any time in our showroom.

Condition: used, Year of construction: 1993, operating hours: 9,924 h, load capacity: 2,500 kg, lifting height: 3,800 mm, fuel type: gas, gearing type: automatic, Equipment: head guard, * STILL R 70-25 Pedjzdwtyspfx Amyjpw * Year of manufacture: 1993 * VW 1.6 engine * Cylinder head gasket defective

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 10,000 kg, first registration: 09/1993, loading space length: 29,200 mm, loading space width: 2,500 mm, total length: 29,200 mm, total width: 2,500 mm, total height: 1,320 mm, suspension: hydraulics, tire size: 275/70 R22.5, wheelbase: 10,240 mm, color: other, Year of construction: 1993, Superstructure Construction year: 1993 Fifth wheel height: 120 cm = More information = Axle configuration Tyre size: 275/70 R22.5 Rear axle 1: Double wheels; Max. axle load: 10000 kg; Steering; Tyre profile left inner: 70%; Tyre profile left outer: 70%; Tyre profile right outer: 70%; Tyre profile right outer: 70% Rear axle 2: Double wheels; Max. axle load: 10000 kg; Steering; Tyre profile left inner: 70%; Tyre profile left outer: 70%; Tyre profile right outer: 70%; Tyre profile right outer: 70% Rear axle 3: Double wheels; Max. axle load: 10000 kg; Steering; Tyre profile left inner: 70%; Tyre profile left outer: 70%; Tyre profile right outer: 70%; Tyre profile right outer: 70%; Brakes: drum brakes; Suspension: hydraulic suspension Weights Empty weight: 12.000 kg Carrying capacity: 36.000 kg GVW: 48.000 kg Functional Height of cargo floor: 132 cm Condition Technical condition: very good Visual appearance: very good Identification Registration number: OD-22-FG = Dealer information = Ppodpfxozdkwrs Amysw For more photos see: Why you buy from Thomas Trucks? That choice is simple. Thomas Trucks is one of the independent trading companies worldwide in the field of used commercial vehicles. Here you can choose from an ever-changing stock of second hand trucks, tractors, trailers and trailers. Our offer includes all European brands, construction years and price ranges. Here you will always find a good vehicle for the right price! Thomas Trucks always has: - Sharp prices - Good service - Spacious, rapidly changing stock - Known quality - Decent business - We speak many languages - Accompaniment input and transport - (Export) license plate quickly arranged - Professional technical services - And more. Visit the website: and view our complete range and competitive offers We are open 6 days a week. Do you need help with exporting, importing, or shipping your vehicle? Contact our sales team. Selling your current vehicle to us is also possible. We do our best to display the data as accurately as possible, however no rights can be derived from this data We can also arrange financing for you within the Netherlands.

Condition: excellent (used), Year of construction: 1993, Gas tank used for CO₂ (carbon dioxide). Working pressure: 20 bar. Year of manufacture: 1993. Podpfx Ajy R Uq Sjmyopw We also have in stock other tanks and trailers for different gases: oxygen, nitrogen, argon, hydrogen, helium, methane, ethylene, N2O, LNG, CNG

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, fuel type: gas, output current: 178 A, output voltage: 6,600 V, output frequency: 50 Hz, continuous power (apparent): 1,976 kVA, motor manufacturer: MWM Deutz, MWM Deutz TBDG 441 BV16, including generator for combined heat and power (CHP) plant, dual fuel, gas, diesel, year 1993. Spare parts also available for sale: turbocharger, injection pump, cylinder heads, crankshaft, etc. 7 units of engines and generators available, AVK 6600V 173A 50Hz, control unit. Psdpfxsy Hmhbs Amyepw

Condition: used, Year of construction: 1993, Internal item no.: 26036 Lathe Weiler Praktikant 160B Ppodpey D N Daefx Amyew Year of manufacture: 1993 Centre height: 160 mm Centre distance: 650 mm Spindle speeds: 48–2,500 rpm Spindle bore: 40 mm The machine is equipped as follows: - 3-axis digital readout (Z0 display not working, likely scale is defective) - Multifix "A" toolpost - Drill chuck MK3 - 160 mm 3-jaw chuck Garant (including reversible jaws) - Steady rest - Various change gears - Operating manual / repair documents, etc. Condition: All gear stages shift smoothly. The main spindle runs very quietly, even at high speeds. The bedways have slight scoring. Dimensions (LxWxH): 180 x 90 x 170 cm Weight: approx. The machine is fully functional and can be inspected under power by arrangement at our premises, with over 500 m² of heated storage space.

Year of construction: 1993, condition: repair required (used), Loroch AK Automat saw blade sharpening machine Year: 1993 Blade diameter min/max: 80/710 mm Pjdpfxsgtmt Tj Amyopw Pitch: 3-25 mm Type of grinding wheel: Borazon Grinding wheel diameter: 200 mm Drive motor: 0.55 kW Operating speed: 10-45 rpm Coolant system Dimensions: 1500 x 1200 x 2300 mm Weight: 750 kg

Condition: used, Year of construction: 1993, 1 used column drilling machine Brand: Alzmetall Model: AB 36 Year of manufacture: 1993 Spindle taper: MK 4 Drilling capacity in steel St 60: 34 mm Drilling capacity in cast iron GG 20: 40 mm Max drilling capacity in St 60: 40 mm Thread cutting in ST 60: M 24 Thread cutting in GG 20: M 30 Reach: 330 mm Column diameter: 145 mm Pedpfxjy H Dfwo Amyopw Spindle stroke: 160 mm with automatic drilling feed Total power requirement: 1.3 kW Machine height: 1865 mm Weight approx. 470 kg

Condition: used, Technical details: length: 750 mm height: 800 mm welding current: 120 machine weight ab.: 180 kg dimensions L x W x H: Schweißgerät: 0,75 x 0,52 x 0,8 m dimensions L x W x H: Kompressor: 1,2 x 0,5 x 0,9 m Plasma cutter with piston compressor optional cutting device: make Jäckle, year: 2005 - cutting power 30 kVA - TIG / E-welding - cooling type F - with torch package 6,0 meter - with ground cable 12,0 meter OPTIONAL: piston compressor: make Schneider type Universal 650-60D, year: 1993 - filling capacity 500 liters/min. Podpfx Aju R A Dljmyspw - volume flow 616 liters/min. - Compressor pressure 10 bar - power max. 4 kW - incl. compressed air hose approx. 4 meters - mobile on two wheels *

Condition: good (used), Year of construction: 1993, CNC cycle-controlled lathe, manufactured by VDF BOEHRINGER, type: DUC 560, year of manufacture: 1993, with SIEMENS SINUMERIK 805T control. Turning length: 1000 mm Turning diameter over cross slide: 365 mm Turning diameter over bed: 570 mm Spindle speeds: 3-2500 rpm, spindle motor: 19 kW Spindle bore: 62 mm Chuck diameter: 315 mm, Forkardt Turret with 8 positions, VDI 30 Podpfxjd Ewaas Amyspw Includes accessories and machine documentation.

Condition: good (used), Year of construction: 1993, CNC universal milling machine, DMG MORI, Type: MH 600 C Control system: MAHO 532, year of manufacture: 1993. Podpfx Amsiihxhsyspw Equipped with an automatic swivel milling head (G17/G18) and B-axis rotary table. Without tool changer. Further data can be found in the data sheet. Complete machine documentation and data backup available. Good overall condition.

Condition: used, mileage: 542,048 km, power: 110 kW (149.56 HP), first registration: 05/1993, fuel type: diesel, overall weight: 7,490 kg, color: blue, gearing type: mechanical, number of seats: 3, total width: 2,500 mm, total height: 3,600 mm, Equipment: all wheel drive, crane, * Differential lock * Leaf suspension * Power take-off with tipper hydraulics * Maulkopf-type trailer coupling * All-wheel drive ----* Hiab loader crane type: 100AW, year: 1993, max. load capacity 1,250 kg at 7.8 m outreach * 4 hydraulic outriggers ----* Tire size: 12.5R20 * Curb weight: 7,100 kg * Overall length: 5,680 mm * Hydraulic system hours: 13,273 * TÜV & SP: expired ----Subject to errors and prior sale Vehicle number: 5283 WhatsApp Support available! If you have questions about the vehicle or need more information, feel free to contact us conveniently via WhatsApp WhatsApp Pjdovhv Emspfx Amyepw WhatsApp

Condition: used, Year of construction: 2014, maximum speed: 50 km/h, color: orange, overall weight: 7,499 kg, front tire size: 285/70R19.5 | 60%, rear tire size: 285/70R19.5 | 60%, total length: 537 mm, empty load weight: 3,900 kg, maximum load weight: 3 kg, tire size: 285/70R19.5, tire condition: 60 %, operation weight: 7,499 kg, Equipment: air conditioning, compressed air brake, Tyres (front): 285/70R19.5, Tyres (rear): 285/70R19.5, First registration: 01.07.2014, Drop sides, automatic towing hitch._____ We are selling a used Lindner Unitrac 102 EP from year 2014 with approx. 3,200 operating hours and 47,000 kilometers. Equipment: 50 km/h, 16/16 splitter gearbox, 4-wheel steering, municipal (orange) paint, heated windscreen, air-suspended driver's seat, signal stickers, radio, control unit block: Perkins engine, POWERLINK 1 x EWS incl. U720B controller front: DWS + DW + 4 lines + RL including joystick and attachment console, tyres 285/70R19.5, toolbox, three-way tipper with aluminum drop sides, Dautel trough lifter from year 1993, reverse camera, front mounting plate size 3. Further details available on request. Location: 94491 Hengersberg. Podpoyq Av Iofx Amyepw