Used Weingarten Press for sale (12,205)

Condition: used, Single-column – Eccentric press WEINGARTEN Type EV 63 Machine No. 738 / 61 Year of manufacture 1962 Pressing force 63 tons Stroke 260 mm Table area 630 x 530 mm Table opening Ø 210 mm Slide area 315 x 260 mm Adjustable slide stroke 8-100 mm Slide adjustment 63 mm Tool holder bore Ø 40 mm, with clamping piece Installation height max 450 mm Stroke rate 115 strokes / min Compressed air requirement min. 4.5 bar Motor power 4 kW Power connection 380 Volt, 50 Hz Ljdpfx Aek S Htxeftorp Table height above floor approx. 750 to 900 mm - Electrical stroke release via foot switch or two-hand control - Overload protection by shear plate - Clutch-brake combination by WEINGARTEN friction-thread clutch with top dead center through-drive protection - Front crankshaft support bearing - Press table adjustable in height via 2 threaded spindles - Manual centralized lubrication - Control cabinet positioned beside the press - UVV (German trade association for accident prevention) for manual feeding operations Space requirement L x W x H 1750 x 1600 x 2430 mm Weight 4.5 tons Good condition

Condition: used, Single-column eccentric press WEINGARTEN type ARP 100 Machine no. No. 122481 Year of construction 1984 Pressure capacity 100 ton. throat 400 mm Table size 920 x 660 mm ram surface 700 x 450 mm Rear upright width 735 mm Stroke adjustment 20 - 160 mm Plunger adjustment 80 mm Installation height with 160 mm stroke max. 355 mm (without intermediate table top) Installation height with 20 mm stroke max. 425 mm (without intermediate table plate) Stroke rate 60 strokes/min. Table surface intermediate table top 920 x 610 mm Thickness of intermediate table top 90 mm Hole in intermediate table top Ø 210 / 180 mm Through-hole in machine table Ø 210 / 180 mm Table height above floor 800 mm (without intermediate table top) Lrsdpfsu Rwa Isx Aftsp T-slot width in table and ram 22 mm Clamping pin bore 50 mm Motor power 11 kW Mains connection 400 Volt, 50 Hz - Hydraulic overload protection in ram - ORTLINGHAUS pneumatic clutch/brake combination - Electromotive ram adjustment with counter - Clamping pin bore with clamping piece - Front crankshaft support bearing - Gear reduction gears in closed oil bath gearbox - Two pneumatic tappet compensation cylinders - WOERNER automatic central grease lubrication - Lift release via electric foot switch or two-hand control panel - Electrical control cabinet permanently attached to the machine - Operating instructions and circuit diagram - UVV for manual insertion work Space requirement L x W x H 2200 x 1600 x 3250 mm Weight 8.3 tons Good condition

Condition: used, Year of construction: 1971, pressure 100 t passage width . mm stroke . mm tracking travel 45 mm Lodpeyuttrefx Aftsrp safety distance 208 mm Follow-up time 149 sec The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1974, functionality: fully functional, pressing force: 63 t, stroke length: 100 mm, ram adjustment: 63 mm, We offer this used Weingarten A 63 eccentric press, year of manufacture 1974, including punching tool. Pressing force: 63 t Strokes per minute: 120 Ram stroke: 8–100 mm Ram adjustment: 63 mm Lsdpfxjyryt Ts Afterp If you have any questions or need further information, please feel free to send us a message or give us a call.

Condition: good (used), Proofing press 55x65cm Antique The machine is in very good condition, can be used as an exhibit or as a printing machine. Max. format 550×650 mm Weight 650 kg Flow table, system of claws holding the sheet. Electrically driven spreading roller. Ledpfju Umaiex Aftsrp

Condition: good (used), Letterpress printing press, foot operated Made in Germany Fully original machine. A brilliant looking exhibit to put in a company lobby. A manually added piston. Rollers Format of the pressure 35x24cm Lredpfx Afjvac S Detop

Condition: good (used), Columbian Press 1858 Letterpress Manufactured in Great Britain by Henry Watts Year of manufacture 1858. Lrodpfxsvbb Slj Aftsp Can be used as a work machine or as a museum exhibit.

Year of construction: 2003, condition: used, frame hydraulic press WEGOMA Workspace: width 3600 mm height 2500 mm the amount of lateral hydraulic cylinders 3 pieces top two pieces beam mechanically Move Mechanical compression setting Lredpfxocmat Uo Aftep more photos an questions

Condition: used, Year of construction: 1978, machine/vehicle number: 150 359 - 11683, functionality: fully functional, For sale are the PS160 (2 units) and the PS140 (1 unit). One is 250 metric tons, the other is 140 metric tons. The PS160 is one of the complete machines and is in operation; the PS160 does not have the control cabinet. Ledpfxjt Ucpbo Afterp The machines are for sale as a single unit and individually. Inquire by phone or email!

Condition: used, Year of construction: 1983, pressure 100 t throat 375 mm stroke 20-125 mm no. of strokes 60 Hub/min ram - range of adjustment 80 mm table surface area 920x660 mm ram surface 700x450 mm hole in the table Ø90 mm tool hole in ram Ø50 mm weight of the machine ca. 8 t Ljdpfxjxh Swhj Aftjrp dimensions of the machine ca. 2100x1500x3300 m

Condition: used, Year of construction: 1992, functionality: fully functional, stroke length: 300 mm, table width: 1,400 mm, installation height: 500 mm, • Type of machine: Hydraulic press / C-frame press • Manufacturer: Müller Weingarten (historic German engineering company) • Model designation: CKD 100 4.1 • Applications: • Forming, punching, pressing of metal or plastic components • Small and medium batch production Lrodpfxsx Ry Hro Aftop • Tool and die making • Design: Robust H-frame or single-column construction, suitable for precise pressing and forming operations • Capacity: Typically around 100 t pressing force (number indicates approx. 100 metric tons nominal force—common for CKD models) 📐 Typical Features • Hydraulic drive: Precise control of force and stroke • Stroke range: Sufficient for versatile applications (e.g. drawing, bending, punching) • Stable construction: Designed for continuous industrial operation • Tool integration: Mounting options for custom tools and dies • Operation: Usually manual or semi-automatic, depending on year of manufacture 🧱 Typical Uses Hydraulic presses like the CKD series are used in production for: • Metal forming (e.g. bending, deep-drawing) • Assembling components by pressing • Assembly processes with defined force • Quality assurance and test pressing Complete circuit diagrams and documentation available! Inspection under power possible at any time.

Year of construction: 1971, condition: used, pressure 160 t throat 440 mm stroke 20 - 120 mm Lrjdecyc Adepfx Aftjp table surface area 1050 x 750 mm no. of strokes 42 u. 62 Hub/min ram surface 800 x 500 mm tool shank hole (depth x diameter) 85 x 50 mm hole in the table 355 mm daylight (stroke down, ram adjustment above) 455 mm ram adjustment 100 mm weight of the machine ca. 11,2 t

Year of construction: 1978, condition: used, pressure 80 t throat 280 mm stroke 8-112 mm no. of strokes 55 / 82 Hub/min ram - range of adjustment 80 mm table surface area 800x570 mm ram surface 560x355 mm hole in the table Ø 280 mm table height 800 mm tool hole in ram Ø 50 mm total power requirement 7,5 kW weight of the machine ca. 6 t Lsdpfjlp U Ddsx Aftjrp dimensions of the machine ca. BxTxH 1600x2200x3000 mm

Year of construction: 1966, condition: used, pressure 100 t throat 410 mm Lrodpelp U D Eofx Aftjp stroke 8-112 mm no. of strokes doubel-strokes per min. 55 / 82 ram - range of adjustment 80 mm table surface area 950 x 700 mm ram surface 700x450 mm hole in the table Ø 280 mm table height 850 mm tool hole in ram Ø 50 mm weight of the machine ca. 7,0 t dimensions of the machine ca. 1400x2200x2800 mm

Year of construction: 1967, condition: used, pressure 63 t throat 280 mm stroke 8-100 mm no. of strokes 56/84 Hub/min ram - range of adjustment 63 mm table surface area 620x500 mm ram surface 310x260 mm hole in the table Ø 250 mm Ledpfx Aelp U Emsfterp table height 850 mm tool hole in ram Ø 40 mm weight of the machine ca. 4 t dimensions of the machine ca. 1200x1900x2800 mm

Year of construction: 2002, condition: excellent (used), MULTI-PRESS MP.610 6 DIE 6 BLOW Perfect mechanics and electronics ! 12x80 mm 105 mm CUTOFF 170 ppm YEAR 2002 Lodpfx Ash Rkhneftjrp PERFECTLY WORKING AVAILABLE IN SPAIN SOME PICTURES AND VIDEOS AVAILABLE

Condition: new, Year of construction: 2026, machine/vehicle number: GP6000H2, functionality: fully functional, input voltage: 400 V, type of input current: AC, pressing force: 12 t, total length: 6,000 mm, overall weight: 2,600 kg, working width: 180 mm, working length: 6,000 mm, Equipment: chassis, documentation/manual, MASSIVE GLUING PRESS FOR GLULAM Technical Specifications: Gluing Length: 6 m Multiple presses can be combined as needed to achieve the desired length (segments of 6 m) Pressure Bar Length: 980 mm Gluing Width: from 80 mm to 180 mm Overall Gluing Height: from 800 mm to 1300 mm (available as per inquiry) Cylinder Stroke: 150 to 300 mm Clamping Force: max 10 tons per cylinder; the appropriate force is adjusted on the pressure regulator We prepare 3D Model of the Machine for you to plan the floor space The hydraulic unit is equipped with a hydraulic accumulator and a pressure switch, which allows the hydraulic pump to operate intermittently during the pressing time. The hydraulic accumulator ensures constant pressure, even when the pump is not in operation. When the pressure drops, the pump restarts and refills the accumulator. Cycle Time: approximately 10 seconds. All surfaces that come into contact with the adhesive are protected with polished stainless steel, making it easy to clean adhesive with water. The press features two trolleys with pneumatic cylinders for the lateral alignment of the glued workpiece. Lrodsu Axfcopfx Aftep Machine Weight: 2600 kg Power Supply Requirement: 5 kW, 3 x 400 VAC Options: -Customized length up to 6 meters -Customized working width -Number of trolleys for lateral alignment available upon request -Trolley with roller for adhesive application available upon request -Multiple presses can be combined as needed to achieve the desired length (segments of 6 m) last segment is as per order 2,0 - 6,0 meters -Customized Overall Gluing Height

Year of construction: 1977, condition: used, pressure 100 t throat 410 mm stroke 8-112 mm no. of strokes 55/82 Hub/min ram - range of adjustment 80 mm table surface area 950x700 mm ram surface 700x450 mm hole in the table Ø 280 mm Ljdolp U Daspfx Afterp table height 800 mm total power requirement 11 kW weight of the machine ca. 7,5 t dimensions of the machine ca. BxTxH 1600x2200x3000 m

Year of construction: 1958, condition: used, pressure 160 t throat 340 mm stroke 20-120 mm no. of strokes 45 Hub/min ram - range of adjustment 100 mm table surface area 800x620 mm ram surface 500x400 mm hole in the table Ø 360 mm tool hole in ram Ø 50 mm weight of the machine ca. 12 t Ljdpfxjlp U Ebs Afterp dimensions of the machine ca. 2200x2000x3600 mm

Year of construction: 1962, condition: used, pressure 10 t throat 170 mm stroke 6-60 mm no. of strokes 160 Hub/min Lredpfxjlp U Nbj Aftjp ram - range of adjustment 40 mm table surface area 420x320 mm ram surface 180x140 mm hole in the table Ø 120 mm table height 850 mm tool hole in ram Ø 32 mm weight of the machine ca. 1 t dimensions of the machine ca. 1200x1200x1900 mm

Year of construction: 1970, condition: used, pressure 100 t throat 415 mm stroke 8-140 mm no. of strokes 48 Hub/min ram - range of adjustment 80 mm table surface area 920x670 mm ram surface 700x450 mm table height 800 mm Lrodpelp U Spefx Aftjp tool hole in ram Ø 50 mm weight of the machine ca. 8 t dimensions of the machine ca. BxTxH 1500x2000x2800 mm

Year of construction: 1984, condition: used, pressure 63 t throat 320 mm stroke 8-100 mm no. of strokes 120 Hub/min ram - range of adjustment 63 mm table surface area 730x600 mm ram surface 540x360 mm table height 850 mm tool hole in ram Ø40 mm weight of the machine ca. 5,5 t Lodpfop Sycpox Aftorp dimensions of the machine ca. BxTxH 2000x2000x3000 mm

Condition: good (used), Year of construction: 1977, functionality: fully functional, power: 15 kW (20.39 HP), pressing force: 200 t, table width: 800 mm, table length: 1,100 mm, throat depth: 440 mm, distance table to ram: 400 mm, total length: 37,200 mm, total width: 24,000 mm, total height: 18,200 mm, overall weight: 12,600 kg, ram adjustment: 110 mm, ram stroke: 40-180 mm Ljdpfotu Hvwsx Afterp incl. Helmerding feed, 400 mm x 4 mm Strokes: 40 + 60 1/min Distance table/ram - adjustment top/stroke bottom: 400 mm Table opening: 450 mm diameter

Condition: defective spare-parts repository (used), Year of construction: 1974, machine/vehicle number: 121645, functionality: not functional, pressing force: 63 t, table width: 650 mm, table height: 910 mm, overall weight: 4,000 kg, space requirement height: 2,800 mm, space requirement length: 1,200 mm, space requirement width: 1,900 mm, stroke adjustment: 63 mm, The eccentric press has a clutch defect and is currently non-operational. Lsdpfxsx D Tngj Aftjrp Without the column stand mounted in the pictures.

Condition: good (used), Year of construction: 1988, machine/vehicle number: 222 056 A110, Müller Weingarten CE 40.25.4 Press Lsdpfx Asqrqz Ajftorp -WAG 850 The machine is tested according to VDE until 23.09.2026. Manufacturer: Müller Weingarten Operating voltage: 380 V Control voltage: 220 V Direct voltage: 24 V Rated current of the machine: 25 A Per/s: 50 Delivered: 1988 Overtravel: 9 mm Overtravel time: 80 ms Safety distance: 128 mm