Used Weber-Hyd Hydraulic Tool Kit for sale (50,320)

Condition: new, Year of construction: 2026, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 315 t, stroke length: 800 mm, operating speed: 120 mm/s, reverse speed: 100 mm/s, table width: 1,160 mm, table length: 1,260 mm, table height: 600 mm, ram plate width: 1,160 mm, ram plate length: 1,260 mm, distance table to ram: 1,250 mm, clearance between the columns: 1,160 mm, retraction force: 30 t, oil tank capacity: 510 l, total length: 2,000 mm, total width: 1,250 mm, total height: 3,500 mm, overall weight: 13,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, YQ32-315T Hydraulic Press This series of presses are general-purpose hydraulic presses, widely used in machinery manufacturing, automotive, motor, electrical appliance, light industry and other industries. They are suitable for metal processing procedures including drawing, bending, flanging, cold extrusion and blanking. The machines also perform straightening, press fitting, as well as compression molding of powder products, abrasive products, plastic products and insulating materials. The working pressure, pressing speed and stroke can all be adjusted within the specified parameter range according to process requirements. Equipped with an independent power unit and electrical control system, the press adopts centralized push-button control and supports three operation modes: manual, semi-automatic and automatic. It is available with two pressing modes: pressure setting and stroke setting. Ibodpfxsy Uiyve Ahysc Operation Sequence: Motor start → Main cylinder piston rapid no-load downstroke → Low-speed pressurization → Pressure holding (holding time adjustable) → Pressure relief → Slide return stroke → Work stop → Total stop Mainframe The mainframe adopts a vertical three-beam four-column structure, consisting of an upper beam, a slide, and a lower beam connected by four columns, which are fastened with nuts to form a closed rigid frame. All major structural components of the mainframe are fabricated from welded steel plates using CO₂ gas shielded welding. After welding, the entire frame undergoes vibration stress relief to eliminate internal residual stresses. Key components are machined on advanced equipment such as gantry milling machines, large floor-type boring and milling machines, and large precision lathes, ensuring high overall accuracy of the machine. The mainframe is pre-tensioned using hydraulic nuts. The slide is connected to the piston rod of the main cylinder and moves up and down guided by the columns. T-slots are provided on the lower surface of the slide and the upper surface of the movable worktable for die mounting. The columns are made of high-quality 45 carbon steel with hard chrome plating on the surface; the column guide sleeves are made of composite material, offering excellent wear resistance and self-lubricating properties.

Condition: used, Year of construction: 2008, functionality: fully functional, total length: 4,000 mm, quill stroke: 350 mm, quill travel distance: 350 mm, overall weight: 24,350 kg, input voltage: 400 V, power: 38.5 kW (52.35 HP), type of input current: three-phase, AMADA HFP 400-4L NT CNC HYDRAULIC PRESS BRAKE – 400 TONS / 4 METERS Ibsdpfxjz Sva Hs Ahyoc Amada HFP 400-4L NT hydraulic press brake from 2008, manufactured in France by Amada Europe. Robust and rigid machine, designed for bending thick sheet metal and large lengths in boiler making, metal construction, and industrial sheet metal fabrication. TECHNICAL SPECIFICATIONS - Manufacturer: Amada (Amada Europe S.A., France) - Model: HFP NT 400-4L - Year of manufacture: October 2008 - Serial number: B080063 - Bending force: 4,000 kN (approximately 400 tons) - Bending length: approximately 4 meters - Maximum stroke: 350 mm - Machine weight: 24,350 kg - Power supply: 400/415 V – 50 Hz – three-phase - Installed power: 38.5 kW - Rated current: 67 A - Sound level: less than 75 dB(A) - CE marking NUMERICAL CONTROL - Original Amada AMNC PC control system - Programming screen mounted on a pivoting arm - Remote electronic handwheel for fine adjustment (x5 function) - Control panel with emergency stop and test mode - Floor-mounted control pedal SAFETY - Fiessler AKAS laser safety barrier, with AKAS II-3M receiver - Operator hand protection as close as possible to the punch - Closed protective grating at the rear of the machine BACK GAUGES - Motorized back gauges controlled by the numerical control system - Guided by ball screws and linear rails - Repeatable sheet metal positioning INCLUDED TOOLING - Segmented punches and dies mounted on the machine - Additional set of dies, punches (including Eurostamp), and accessories, on a pallet and in a crate CONDITION Machine located in an active workshop, complete equipment (control, safety barrier, back gauges, tooling). Paintwork worn, consistent with industrial use. SALES CONDITIONS - Location: Netherlands - Incoterm: EXW Dordrecht (negotiable) - Disassembly, loading, and transport are the responsibility of the buyer - Availability: from November 3, 2026 - Inspection possible by appointment

Condition: used, functionality: fully functional, Year of construction: 1995, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 14 mm, Equipment: safety light barrier, Hydraulic Shear Brand: Casanova Model: VC-26 Year: 1995 Power: 30KW New WEINTEK control installed in 2020. Cutting length: 3100mm Maximum cutting thickness (steel): 20mm Maximum cutting thickness (stainless): 14mm Throat: 500mm Cuts per minute: 8-18 Backgauge: 1,000mm Manual blade gap adjustment via side levers. Ibsdswy Nhqjpfx Ahyoc Front safety laser.

Condition: used, Year of construction: 2001, total length: 4,500 mm, total width: 4,000 mm, total height: 8,000 mm, overall weight: 96,000 kg, Hydraulic press with a pressing force of 5,000 kN or 500 t. Manufacturer: Maschinenfabrik EXNER GmbH & Co. KG Type: EXSBRD 500ET Machine No.: 10461 Year of manufacture: 2001 Max. stroke length: 1,300 mm Max. opening: 1,800 mm Min. opening: 500 mm Table size: 2,550 × 2,000 mm Frame passage: 2,570 mm Tool dimensions: 2,200 × 1,800 mm Max. tool weight: 25,000 kg Working speed: 26 / 50 mm/s Ijdpez Swm Iefx Ahysbc Rapid traverse speed: 400 mm/s Overrun distance: 97 mm Overrun time: 158 ms Safety distance: 252 mm Drive power: 159 kW Oil capacity: approx. 2,800 liters Dimensions (LxWxH) approx.: 4500 x 4000 x 8000 mm Weight approx.: 96,000 kg Control: Siemens SIMATIC OP37 Year of construction: 2,001 Condition: good Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: Yes

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, Equipment: CE marking, foot remote control, A used, well-maintained hydraulic swiveling bending machine by Dr. Hochstrate. Type: 2500x6mm Bending length: 2500mm Bending thickness in steel up to 400N/mm²: 6mm Isdpsz Tdixefx Ahysbc

Condition: used, functionality: unexamined, Guillotine Shear Replacement Blade Hole spacing: 190 mm Overall length: 3120 mm Depth: 12 mm Width: 57 mm Iodpfoyym Rvjx Ahyebc Total lower angle: 8° Total upper angle: 6° Contact us for a quote

Condition: used, functionality: fully functional, working width: 3,050 mm, cutting angle (min.): 0.5 °, cutting angle (max.): 3 °, sheet thickness (max.): 6 mm, back gauge: 750 mm, input voltage: 380 V, type of input current: three-phase, overall weight: 4,500 kg, HACO 3000x6mm hydraulic guillotine shear TS-3006 Brand: HACO Model: TS-3006 Power: Three-phase 380V Cutting length: 3,050 mm Cutting thickness: 6 mm Type: Vertical cut, motorized blade angle adjustment (0.5 to 3º) Back gauge: 750 mm (motorized with manual handwheel for fine adjustment) Manual blade gap adjustment via lever at the rear Weight: 4,500 kg Ibodewx Ix Sopfx Ahysc Motor: 7.5 kW

Year of construction: 2003, condition: used, frame hydraulic press WEGOMA Workspace: width 3600 mm height 2500 mm the amount of lateral hydraulic cylinders 3 pieces top two pieces beam mechanically Move Iodpfjcmat Ujx Ahyebc Mechanical compression setting more photos an questions

Condition: excellent (used), Year of construction: 2011, Max sheet thicknees - 6 mm Ibodez S T Iujpfx Ahyec Max sheet width - 3100 mm

Condition: used, Year of construction: 1985, sheet thickness: 2,25total power requirements: 1,1sheet length: 2025 Working length: 2025 mm Kl. Tail width: 5 x s Kl. Inner radius: 1.5 - 2 x s Adjustability of the lower and bending beams: 90 mm for round bends: 90 mm Highest working position of the upper beam: 190 mm large opening width of the upper beam: 290 mm Duration of a workflow: 7.0 sec. External dimensions approx.: 3000 x 1000 x 1650 mm with: - Control panel on the right side of the machine Iedpevaatfofx Ahyebc - Simple bending angle adjustment on the control panel - Choice of switching to automatic, semi-automatic or typing mode - Potentiometer for degree adjustment -Foot switch used, in good condition

Condition: good (used), WF HHP 625 – Horizontal Press Year: 2006 Manufacturer: WF Maschinenbau u. Blechformtechnik GmbH & Co KG Germany Machine Model: WF HHP 625 Machine Type: Horizontal Hydraulic Press Technical Specifications: Maximum workpiece diameter: 625 mm Minimum workpiece diameter: 350 mm Maximum workpiece length: 325 mm Maximum press stroke: 750 mm Maximum press force: 2000 kN Siemens 840D control system Parker hydraulic components Hydraulic oil tank capacity: approx. 800 liters Required cooling water for hydraulic system: approx. 1000 l/h Cooling water inlet temperature: max. 25°C Air supply connection: 6 bar / ½” Ambient operating temperature: 10°C – 40°C Hydraulic Equipment: Main Hydraulic Motor: Manufacturer: Blumenbecker Type: 14BG 207-4AA 200L Power: 30 kW Voltage: 400V / 50Hz Speed: 1465 rpm Secondary Hydraulic Motor: Manufacturer: Blumenbecker Type: 7AA 132 S-4 Power: 5.5 kW Voltage: 400V / 50Hz Speed: 1450 rpm Hydraulic Pump: Manufacturer: Parker Type: PV080R1K1T1NSLD Internal Gear Pump: Manufacturer: Denison / Parker Type: T6CMYR20-1-R_00C1 Flow rate: 93 l/min at 1450 rpm Central Lubrication Unit: Manufacturer: Vogel Type: MFE5-BW7+299 Oil Spray Unit: Manufacturer: Vogel Type: MFE5-BW7+299 Machine Dimensions (Transport Position): Width: approx. 2600 mm Length: approx. 5800 mm Height: approx. 2400 mm Weight: approx. 20,000 kg Additional Information: Ibedezb Il Nspfx Ahyec Hydraulic horizontal press with automated loading/unloading preparation Robot loading interface prepared (robot not included) Transport and lifting drawings available Original manuals and technical documentation included

Condition: used, Year of construction: 2003, pressing force: 120 t, operating speed: 8 mm/s, overall weight: 12,000 kg, Hydraulic Press Brake Brand: Hidrogarne / Ermaksan Model: AP 4100-120 Year: 2003 Power: 11KW Weight: 12,000kg Bending length: 4100mm Ibsdpfox Tp Auex Ahyoc Force: 120t Approach speed: 80mm/s Working speed: 8mm/s Y-axis and X-axis back gauge control with ELGO control system. PROMECAM punch holder. Supplied with: - 4m one-piece die, 90x90mm with several V openings - 4m gooseneck punch, 90mm height, in 835mm sections and some additional smaller pieces - Also comes with sets of straight and 30-degree punches (see pallet photos of punches)

Condition: excellent (used), Year of construction: 1999, Imal hydraulic plate shear, type CCOSI 40/8 working width 4050 mm sheet thickness max. 8 mm Delem CNC control, type DP 10 Iodpfxsz Nx Nrj Ahysbc automatic shear gap adjustment automatic angle adjustment controlled back gauge equipped with a front conveyor belt

Condition: used, sheet length: 1050width: 800heigth: 1400sheet thickness: 3 Ibsdpfx Aevaar Ishyec Bending Machine - Dimensions (L x W x H): approx. 210 cm x 80 cm x 140 cm - Working width: approx. 105 cm

Condition: good (used), Year of construction: 2008, sheet thickness (max.): 13 mm, cutting length (max.): 4,160 mm, DENER Hydraulic Shear 4100x13mm DMMH.4113 Brand: Dener Model: DMMH NC 4113 Year: 2008 Ibodpfewi Snxjx Ahyec Standard Control: Dener HT 071 Cutting Length: 4,160 mm Maximum Cutting Thickness: 13 mm Cutting Inclination: 2º Number of Hold-Downs: 19 Motor Power: 30 kW Cuts/min.: 8 Manual Lubricator *Shear under inspection. Blades have been removed for grinding. Hold-downs have been removed for replacing seals and gaskets. Delivered fully inspected and with a 6-month warranty.

Condition: used, Heavy-duty hydraulic hole-press, perforated panel press or gluing press for gluing or securing workpieces such as frames, panels, windows or doors. Ibodpfjzryy Ssx Ahyjc Technical data: - Cylinders: 6 - Hold-down units: 3 - Pressing area: 260 x 145 cm

Condition: excellent (used), Year of construction: 1985, For sale: MÜLLER HEP 10.20.35 hydraulic press, manufactured in 1985. The press was in very good working condition until recently. It underwent an inspection in 2023. Ibsdpfx Aez Saqqehyec

Condition: used, SincoTec Type: POWER FLOW 100kN / 2000Nm Sincotec Power Flow 100 kN / 2000 Nm – Servohydraulic testing machine – fully functional Description: For sale is a servohydraulic testing machine, Sincotec Power Flow, from an industrial operation. The system is ideally suited for dynamic and static testing of components and assemblies, e.g. in the automotive, mechanical engineering or research field. Technical highlights: Max. testing force: 100 kN (up to ±150 kN) Max. torque: ±2000 Nm (up to ±4000 Nm) Linear stroke: ±50 mm (max. ±75 mm) Max. swivel angle: ±50° Servohydraulic control Control via Sincotec TestPilot / CoPilot software Includes large hydraulic power unit Dimensions & testing machine Testing table: approx. 1.20 × 1.00 × 1.20 m (H) Overall height of testing machine: approx. 3.30 m Hydraulic power unit (separate) Height: 2085 mm Length: 2714 mm Width: 1820 mm Fully functional before disassembly Isdpjzimb Djfx Ahyebc Power supply / electrical (from nameplates) Individual units / motors 230 V / 50 Hz Leak oil pump: 0.18 kW / 1.5 A 400 V / 50 Hz (three-phase) Crossbeam: 0.25 kW / 0.79 A Total weight: approx. 3000 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, functionality: fully functional, Year of construction: 2000, working width: 3,050 mm, cutting angle (min.): 0.5 °, cutting angle (max.): 3 °, sheet thickness (max.): 6 mm, back gauge: 750 mm, input voltage: 380 V, overall weight: 4,500 kg, Hydraulic vertical cutting shear Brand: HACO Model: TS 306 Sold by: Casanova Three-phase 380V Year: 2000 Type: Vertical cutting (blade inclination) Cutting length: 3050 mm Capacity: 6 mm Cutting angle adjustment: 0.5-3 degrees Number of hold-downs: 13 Ijdpfx Ahexgdlnsyobc Strokes per minute: 8-14 Squaring arm: 1000 mm Back gauge: 750 mm Motorized back gauge with handwheel for fine adjustment Motor: 7.5 kW Weight: 4500 kg

Condition: like new (used), functionality: fully functional, pressing force: 250 t, total height: 4,800 mm, overall weight: 14,000 kg, Intemach TURI 250-H Ibjdpfx Ahsz Rprtoysc 250-ton hydraulic press. Own weight is 14 tons, height is 4.8 meters. Table size: 1400 x 900 mm Main engine: 37 kW Auxiliary cylinder: 80 x 50 mm diameter Master cylinder: 340 mm diameter Ram stroke: 600 mm Working speed: 2 – 20 mm/sec

Condition: good (used), Year of construction: 2001, Cutting length 3060 mm Maximum cutting capacity 6 mm Manual adjustment of cutting gap 750 mm backstop Fold-up finger guard Iodpfx Asz Sx Exehysbc Support arms with scale with sheet metal holding device

Condition: used, HYDRAULIC PRESS SMG PRESSURE 300t LENGHT OF STROKE 700mm Ibedpfx Astndu Ushyjc POWER 30kw UP TABLE DIMENSIONS 1500(1600)x1300mm DOWN TABLE DIMENSIONS 1500(1600)x1300mm CUSHION 100t CUSHION LENGTH OF STROKE 280mm WEIGHT 28.000kgr FULL RECONDITION LIKE NEW CHANGE EVERYTHING (SEALS PUMPS etc)

Condition: new, functionality: fully functional, fuel type: electric, Year of construction: 2026, Spring & Hydraulic Cone Crusher: Design, Operation, and Technical Insights Cone crushers are vital in mining, metallurgy, and aggregate production, designed for secondary and tertiary crushing of hard and medium-hard materials. Among the most common types are the spring cone crusher and the hydraulic cone crusher, each offering distinct advantages in structure, performance, and control. Spring Cone Crusher The spring cone crusher is a traditional design that uses mechanical spring systems for overload protection. When uncrushable material enters the crushing chamber, the spring mechanism allows the bowl liner to move downward, preventing damage to the crusher. Once the foreign object passes, the springs restore the original position, ensuring continuous operation. Structural Composition: Main frame and base assembly Eccentric shaft and transmission system Fixed and moving cones (mantle and concave) Spring and adjustment mechanism Working Principle: Material is fed into the crushing chamber and compressed between the mantle and concave. The laminated crushing principle ensures that particles are crushed by both impact and pressure, producing uniform and well-shaped aggregates. Technical Highlights: Feed size: ≤300 mm Discharge size: 3–60 mm Capacity: 30–700 t/h Motor power: 75–400 kW Advantages: Simple structure, low maintenance cost, stable performance, and reliable overload protection. Applications: Widely used in crushing granite, basalt, iron ore, copper ore, and limestone. It is suitable for medium-scale operations where cost efficiency and durability are priorities. Hydraulic Cone Crusher The hydraulic cone crusher is an advanced evolution of the spring design, integrating hydraulic systems for improved automation, safety, and precision. It replaces the mechanical spring system with hydraulic cylinders that control the discharge opening and provide overload protection. Structural Composition: Main frame and eccentric assembly Hydraulic cylinders and control system Crushing chamber with optimized liner design Automatic lubrication and hydraulic adjustment units Working Principle: The hydraulic system adjusts the discharge opening and releases pressure automatically when uncrushable material enters. This prevents mechanical damage and allows the crusher to resume operation quickly. The combination of high-speed eccentric motion and optimized chamber geometry enhances crushing efficiency and product quality. Technical Highlights: Feed size: ≤320 mm Ibjdjtxhybopfx Ahyoc Discharge size: 3–50 mm Capacity: 45–1200 t/h Motor power: 90–630 kW Advantages: Automatic cavity cleaning, precise control, high crushing ratio, and superior particle shape. Applications: Ideal for large-scale mining, aggregate production, and high-demand crushing lines requiring consistent output and minimal downtime. Comparative Overview Both crushers operate on the same compression principle but differ in control and automation. The spring cone crusher offers simplicity and cost-effectiveness, making it suitable for stable working conditions. The hydraulic cone crusher provides advanced control, faster adjustment, and higher efficiency, ideal for modern, large-capacity plants.

Condition: ready for operation (used), very good condition. Isdpfx Ahez N Sqpsyobc

Condition: good (used), Year of construction: 1982, functionality: fully functional, Hydraulic Try-Out Press (Four-Column Press) Pressing force: 3.000 kN Maximum slide stroke: 1.20 mm Table size: 2.050 x 1.300 mm Distance between columns: 2.050 mm (long side), 700 mm (short side) Ibodpfsz S H U Uox Ahyjc Maximum distance from mounting surface to slide: 1.350 mm Minimum shut height: 250 mm Power requirement: 55 kW Tank capacity: 1.200 l Total weight: 55.000 kg Press height: 5.800 mm