Used Vakumix Stirring & Mixing Equipment for sale (43,478)

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, CLEANROOM - ISO 8 | Cleanroom requirements ISO Class 8 | ISO Cleanroom Class 8 | Cleanroom classification. In order to achieve an ISO 8 air purity class in a Cleanroom, several levels of air filtration are usually used (e.g. G4 pre-filter, F9 filter, H13 final filter). Air movement in the room is non-unidirectional (there is a mixing of "clean" air supplied to the room with "dirty" air present in the room). Air vents in the ISO 8 room are placed on the walls. The required number of air exchanges per hour will depend on the nature of the activities conducted in the room and the number of personnel present, but the goal could be to provide 10-40 air exchanges/hr. In ISO Class 8, personnel are often present continuously. Employees may be dressed in standard work attire and visitors in a disposable apron. It is recommended to maintain a minimum overpressure of the room relative to the adjacent zone of 5-10 Pa. Fsdpjq H H Rusfx Albegg Requirements for equipment and materials intended for Clean Room with ISO air cleanliness class 8 (maximum average amount of particles released when: number of samples taken = 100; measurement performed in accordance with ISO 14644-14 in a cleanliness class at least one better than the purpose of the device; number of particles/m3) Detailed description in photos. Technical drawings attached to photos. Description of ventilation The purpose of the ventilation installation performed was to achieve the following air parameters in the Clean Room. The installation was made with the GBD PHARMA 2000 system, meeting all the requirements for 'clean rooms' in the highest classes of air purity. Parameters for the installation: a. Air purity - ISO 8. b. Temperature 19-23 st C c. Humidity max 38%. a. To ensure the required purity of the supplied air, an air handling unit manufactured by DOSPEL with a maximum capacity of V= 3500 m3/h [up to 15 air changes per hour] was used. The air handling unit is equipped with pocket filters : pre-filters FK EU5/EC2 and fine filters FK-EU9/EC2. In addition, HEPA 11 filters made by EUFILTER were used in diffusers located in the ceiling. Data sheets in point H6. As a result , with a measured flow rate of 3264 m3/h, an ISO 7 [class "C"] cleanliness class of the room was obtained in the resting state, and thus an ISO 8 [class "D" ] cleanliness class for the working state. b. The temperature range of 19-23 deg C is for the enlarged cooler and chiller to be freely maintained with 25% fresh air. c. In order to achieve in summer conditions with high temperatures of 30 deg C and humidity of 80%, a freon chiller of 31.4 kW and a chiller of 33.5 kW of cooling power were used. The chiller is made by FUJITSU supplied by Klimatherm Gdansk. The room is automatically regulated overpressure in relation to the external pressure - the pressure difference at the door : 15 Pa The automation of ventilation allows for "economical" mode , in which the installation works in a closed circuit and an overpressure of 15 Pa is maintained. Technical data attached to the photos.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, tank capacity: 5,000 l, usable tank capacity: 5,000 l, total height: 3,350 mm, outer diameter: 1,750 mm, overall weight: 1,250 kg, wall material: stainless steel, wall thickness: 8 mm, manhole diameter: 610 mm, manhole location: top, operating temperature: 80 °C, Equipment: sanitary facilities, Brand new, never commissioned. Professionally decommissioned from an INEOS manufacturing facility prior to first use. Manufactured by Able Engineering, this high-specification sanitary 316L stainless steel pressure vessel is suitable for pharmaceutical, cosmetics, personal care, food, beverage and fine chemical applications. Designed for vacuum and low-pressure service and suitable for installation within ATEX-rated environments. Constructed entirely in 316L stainless steel throughout with 8mm shell and dish walls, dished top and bottom heads, heavy duty tubular stainless steel leg supports with bolt-down base plates, hygienic internal finish < 0.8 Ra, and full hygienic ferrule fittings throughout conforming to ASME BPE / BS3062. Suitable for CIP. Material: 316L Stainless Steel throughout. Working Volume: 5,000 Litres. Shell OD: 1,750mm. Overall Height: 3,350mm. Shell & Dish Wall Thickness: 8mm. Design Pressure: -1.0 to +0.45 Bar.G. Design Temperature: -10°C to +80°C. Empty Weight: 1,250kg. Design Code: PD5500:2018, Cat.3. PED 2014/68/EU certified. Manufacturer: Able Engineering. Serial Number: PXL19693. Factory Tested: November 2020. Nozzles and fittings include 610mm hinged manway, CIP inlet with dip pipe and spray fitting, pressure relief valve connection, nitrogen blanketing connection, Endress & Hauser thermowell pocket, lifting lugs, and earthing boss. Seven units currently available both with and without an agitator fitted. All vessels are brand new and never commissioned, sourced directly from the same INEOS facility. Please view our other listings for additional sizes and configurations — all stock is brand new, ex-INEOS, and available for immediate inspection and purchase. Original engineering drawings and full nameplate documentation available on request. Inspection welcome by appointment. Loading and transport can be arranged. Fodpfxezht Sms Albegg Tracht Ltd specialise in hygienic process equipment for the food, beverage, cosmetics, pharmaceutical and chemical industries, with practical experience supporting both batch and continuous manufacturing environments. In addition to process vessels, Tracht Ltd supply and install stainless steel mixing vessels, Silverson high-shear mixers, hygienic lobe pumps, hygienic centrifugal pumps, access gantries, and provide full vessel installation and commissioning services. Whether replacing existing equipment or expanding production capacity, Tracht Ltd can specify, supply and install the right equipment for your application. Please contact us for further information or to discuss delivery and installation options.

Condition: used, - Cooking chamber dimensions: 1200x2000 mm Fedpfxswxmn So Albsgg - Refurbished equipment: The equipment is prepared upon order, collection and return deadlines are agreed at that time (please ask for the price after refurbishment).

Condition: used, A mixing tank with propeller agitator is offered. Volume: approx. 4000l, internal height: approx. 2000mm, internal diameter: approx. 1650mm, internal material: acid- and alkali-resistant plastic, outer shell: GRP. Equipped with mixing system: variable-speed propeller agitator, manhole, air-operated diaphragm pump for product feed, bottom drain, extraction system and working platform. An on-site inspection is possible. Fodezwfrkepfx Albegg

Condition: good (used), Year of construction: 2014, Cardboard packaging machine, carton erector, B&E Equipment / I-Pak – used: Fgsdpfxezbynpj Albjg Price ex works: only €9,950 (net), if disassembled by the buyer! Manufacturer: B&E Equipment / I-Pak Type: BA20-2 Year of manufacture: 2014 Serial number: 14/0559 Each unit comes with 1x Nordson ProBlue 4 hot melt adhesive applicator and 4 liters of hot melt adhesive. Weight: approx. 1,250 kg 400V, 7kW, 16A, 3 phases Condition: good Available: from approximately Q4/2026 Location: Hamburg A video of the machine is available!

Condition: used, Complete Bottling Line for Water (PET 1.5L) – Overview This used PET bottling line is configured for still water in 1.5-liter bottles, delivering a performance range of approximately 12,000 to 16,000 bottles per hour. Designed for industrial packaging and beverage production, it combines proven second hand equipment from recognized manufacturers to offer a reliable, efficient solution for a used bottling line. The configuration includes preform handling, blow molding, filling, capping support, labeling, shrink wrapping, handle application, palletizing, and conveyors, enabling a seamless end-to-end packaging process. Key components include a preform tipper and elevator by Sameto Technifil, a Siedel SBO10 blow molder, an Alsim Asmojet filler, an Arol cap feeder, a Kronos Contiroll labeling machine, an ACMI Fenix 165 shrink wrapper, and a Smipack HA50 handle applicator. This versatile packaging machinery set-up is ideal for beverage production facilities seeking to expand or replace an existing second hand line with dependable equipment and consistent output. Technical Specifications & Performance Data Production speed: 12,000–16,000 bottles/hour Primary product: Water Container type: PET Bottle format: 1.5L Preform tipper and elevator: Sameto Technifil EBH 2050 (2010) Blow molding machine: Siedel SBO10 (2010) Filling machine: Alsim Asmojet (1999) Fsdsxywglspfx Albjgg Cap feeder: Arol Labeling machine: Kronos Contiroll (2004) Shrink wrapper: ACMI Fenix 165 (2019) Handle applicator: Smipack HA50 (2002) Additional units: Mixer, palletizing, conveyors Advanced Automation & Control Systems The line architecture supports synchronized operation across blow molding, filling, labeling, and end-of-line packaging through standard industrial control interfaces. Individual machine HMIs typically enable format-related adjustments, recipe selection, and real-time status monitoring. Safety interlocks, guarding, and emergency stop interfaces allow integrated stop/start logic across conveyors and processing units for consistent flow and minimal downtime during production. Production Line Integration Capabilities This complete line is designed for inline operation with continuous bottle flow from preform handling through to palletizing. Included conveyors facilitate smooth transfers between machines, helping to maintain stable throughput at the specified performance range. The configuration is suited for PET water bottling at 1.5L and can accommodate typical beverage production requirements for industrial packaging. Integration with upstream preform feeding and downstream logistics is supported by standard mechanical and control interfaces. Machine Condition & Maintenance History Offered as a second hand used bottling line, the equipment mix spans manufacturing years from 1999 to 2019. The line is presented for sale in working condition and is suitable for recommissioning for beverage production.

Condition: like new (used), Juice Mixing and Preparation Line with Homogenizer – Stainless Steel Industrial line for mixing, preparation, and homogenization of juices, designed for the production and conditioning of juices, nectars, fruit beverages, and other liquid or semi-liquid products. The installation consists of several stainless-steel process tanks, mixing systems, sanitary piping, pumps, instrumentation, and a homogenizer, allowing for various product preparation operations to be carried out within a single unit. Homogenization reduces and more uniformly distributes the particles present in the product, helping to improve its stability, texture, and consistency, and reducing the tendency for phase separation, depending on the formulation. MAIN FEATURES -Type: Juice mixing and preparation line -Application: Juices, nectars, and beverages -Several stainless-steel process tanks -Tanks with mixing systems -Integrated homogenizer -Product mixing and homogenization -Circulation and transfer system -Sanitary pumps -Process piping and valves -Pressure and temperature instrumentation -Batch preparation and formulation -Possibility of product recirculation -Construction primarily in stainless steel -Hygienic design for the food industry -Unit mounted on a common frame -Integrable with thermal treatment and filling systems PROCESS The different ingredients or base products are introduced into the preparation tanks, where mixing, dissolution, ingredient incorporation, and conditioning operations can be carried out. Subsequently, the product can circulate through the homogenizer, where it is subjected to a mechanical treatment designed to reduce and uniformize the size of the particles or dispersed phases. Fjdpfox S E E Aox Albegg Depending on the formulation and installed configuration, the system can be used for: -Preparation and mixing of juices -Production of nectars -Mixing of different concentrates or pulps -Ingredient incorporation -Homogenization -Suspension stabilization -Reduction of phase separation -Pre-treatment before thermal processing -Feeding filling lines APPLICATIONS Especially suitable for manufacturers of juices, nectars, fruit beverages, liquid purees, and other food beverages that require a versatile installation for preparation and homogenization. It can be used with products containing pulp or suspended particles, subject to the characteristics of the product and the configuration of the homogenizer and other installed equipment. The line can subsequently be integrated with pasteurizers, sterilizers, heat exchangers, aseptic tanks, and filling systems. Machine available for inspection. Additional technical information, capacities, dimensions, additional photographs, or videos can be provided upon request.

Condition: good (used), functionality: fully functional, power: 26 kW (35.35 HP), tank capacity: 3,000 l, For sale is an Alco AMP 3000 V vacuum mixer with a cooling option! The system is offered including a base platform and a mobile loader for 200-liter meat containers! TECHNICAL DETAILS Two horizontal, parallel arranged mixing shafts Collision-free shaft geometry Product-specific shaft geometry for efficient and homogeneous mixing, even with sensitive products. Capacity: 3,000 liters Power: 26 kW Fodpfxszzpz Rj Albjgg Mixer dimensions Length: 3,700 mm Width: 1,700 mm Height: 2,900 mm Base platform dimensions Length: 2,100 mm Width: 800 mm Height: 2,400 mm Mobile loader dimensions Length: 1,450 mm Width: 1,300 mm Height: 3,400 mm EQUIPMENT Cooling option Base platform Mobile loader for 200-liter meat containers

Condition: ready for operation (used), functionality: fully functional, The Seydelmann K504 vacuum cutter cooker combines chopping, mixing, emulsifying, and cooking in a 500-liter tank. It is particularly suitable for manufacturers of processed meats, ready meals, meat products, fish, and plant-based alternatives. In this way, a single machine can perform multiple processing steps while minimizing product transfers. The K504 processes both fresh and pre-cut, frozen or cooked meat equally well. Furthermore, Seydelmann also provides for its use with fish, vegetables, plant proteins, fruits, and other food preparations. Its operating range extends from -12°C to +85°C. Vacuum chopping and emulsifying The vacuum function removes air during the chopping process. Consequently, it enables a finer and more compact emulsion to be obtained. Seydelmann indicates a volume reduction related to air of between 5 and 7%. Moreover, vacuum processing promotes protein extraction as well as the binding of water and fats. This technology particularly meets the needs of the industrial processed meat industry. It is suitable, for example, for cooked sausages, dry sausages, meat emulsions, and preparations that require a uniform texture. The K504 is also recognized on the market as an industrial vacuum cutter and 500-liter cooker. Fgjdpfozzzyrsx Albjg Cooking and chopping in a single machine The cooking system heats the tank with hot steam injected underneath it. As a result, the product can be chopped and heated during the same process. This combination reduces production steps and can therefore shorten the processing time. The Seydelmann K504 is therefore suitable for recipes that require fine grinding, thorough mixing, and controlled temperature increase. Furthermore, the large tank capacity meets the needs of industrial batch production. Control and integration into production The Auto-Command 1000 system features a 21.5-inch color screen. It allows you to monitor technical parameters and store 30 programs, each including up to 10 steps. In this way, the operator can more easily reproduce the settings for different recipes. Finally, the cutter can be equipped with loading and unloading equipment to facilitate product handling. Its construction, which is almost entirely made of stainless steel, also simplifies cleaning. The Seydelmann K504 is therefore a complete solution for industrial companies looking for a large-capacity vacuum cutter cooker. Technical specifications Manufacturer: Seydelmann Model: K504 Tank capacity: 500 L Operating range: -12°C to +85°C Motor power: 140 to 200 kW depending on the version The advantages 500-liter industrial tank Chopping, mixing, and emulsifying Vacuum processing Integrated cooking Processing of fresh, frozen, or cooked products Adaptation to meat and plant-based recipes Up to 30 production programs Reduced transfers between multiple machines Stainless steel construction

Condition: used, Year of construction: 1973, functionality: not functional, machine/vehicle number: 1709, SIP MUL-1000 universal length measuring machine with a comprehensive set of original SIP accessories. Manufacturer: SIP – Société Genevoise d’Instruments de Physique, Geneva/Switzerland Year of manufacture: 1973 Machine number: 1709 Measuring range: approx. 1,000 mm Fodszz Hq Aspfx Albegg The machine is offered expressly in its current condition, without any guarantee regarding functionality or accuracy. Oil was detected in the area of the scale/measuring system. A detailed fault diagnosis or repair has not been performed. Therefore, the machine is not sold as being in working order. Inspection and your own technical assessment on-site in Mönchengladbach are strongly recommended.

Condition: like new (used), Industrial Control Valves & Instrumentation – New & Used Fgodjzwd H Hjpfx Albjg Mixed lot of high-quality industrial control valves, actuators, and instrumentation, including SAMSON and Endress+Hauser. The lot consists of new/unused surplus and used equipment, including pneumatic control valves, positioners, actuators, and flowmeters in various sizes and specifications. Condition: New/unused surplus & used Brands: SAMSON, Endress+Hauser, and others Available: As one complete lot Delivery terms: EXW Rotterdam, The Netherlands, loaded onto your truck. Inspection is possible by appointment.

Condition: used, Year of construction: 2019, operating hours: 5,532 h, Equipment: ABS, all wheel drive, soot filter, Finished SD2500WS PLUS T4F* weather protection canopy * Air conditioning * Seat heating * Auxiliary heater * Leveling system/cross-slope control * Automatic centralized lubrication system for paver and/or screed * Infinitely variable hydrostatic drive * Front axle is a tandem swing axle * Diesel engine Cummins QSB 6.7 - EUIV(T4f) * All-wheel drive (2 x rear wheels + 4 x front wheels) * Pave Manager 2.0 Advanced * PLC electrical system (CAN bus), ECO mode, 24 V electrical system * Wheel track stone deflector * Mixing material hopper with individual control * Hydraulic front hopper * Support rollers with shock absorption * Reversible slat conveyor with double bars and individual control of conveyor belt halves * Automatic shutdown via mechanical paddles * Hydraulic screw conveyor with height scale * Two reversible screw halves (380 mm) * Ultrasonic sensors in the screw conveyor * Hydraulic screed locking * Side-mounted operator station with weather protection canopy * Variable control panel with push buttons and 7" multifunction display * Two heated Grammer comfort seats Fodpjy T Ukdsfx Albjgg * Four LED headlights (2 x front + 2 x rear) * Dynalink Advanced - Telematics system * Hydraulic system for Pave Manager Adv. * SD2500WS THERMO with LightAssist (Paver) ----Vario screed V 5100 TV PM+* Vario screed with gas heating * Basic width 2.55 m, hydraulically extendable to 5.1 m * Compaction system: tamper and vibration * Bottom plate Hardox 500 * Hydraulic adjustment of roof profiles * Two external controls incl. leveling electronics * Leveling system Mobamatic 2+1 * FRONT WHEEL DRIVE CAN BE ACTIVATED FOR WORK ----Additional equipment and accessories* Screw 380 mm 4.42 m * Connection kit V5100/6000 * Rotating beacon * Fire extinguisher * First aid kit * Smoke extraction system * RESTRICTED SD2500WS THERMO * Hydraulic system for Pave Manager Adv. * LightAssist (Paver) * Lighting for screw conveyor * LED headlights screed left + right * 12V socket * TEMPERATURE MEASUREMENT SCREW CONVEYOR * Spray system 25L with hose * High-performance front-wheel drive * Tool set * SetAssist (Transport position) * TRUCKASSIST ADVANCED * Thermomaterial hopper * Folding material guide * Weather protection house * Hydraulic oil drain hose * STVZO - Lift axle * Infrared temperature measurement preparation * Operating manual + parts list (USB) * Operating manual * Parts list * Set of drawings A3 * Leveling system Mobamatic 2+1 * Vario screed V 5100 TV PM+ * Side guards OBT approved (G) PM * Spirit level screed * Holder for cross-slope Moba * Holder for height sensor MobaGrade 1x * Screed width measurement * LightAssist (Screed) * DYNAPLUS12 ----Vehicle number 12111 Errors and prior sale excepted.

Condition: like new (used), Year of construction: 2021, operating hours: 180 h, functionality: fully functional, machine/vehicle number: 35120025 (inkl. Zubehör 35120030/35120035/35120040), type of input current: three-phase, space requirement height: 2,010 mm, space requirement length: 2,374 mm, space requirement width: 754 mm, Sollich nut mixing unit, type NM 200 VA, year of manufacture 2021, for the continuous mixing of dry ingredients into chocolate, fat, and spreadable products. Fodpfxszzvhdo Albsgg Performance: • max. 1,200 kg/h of spreadable product with 5% dry ingredients (60 kg/h) • max. 1,200 kg/h of spreadable product with 10% dry ingredients (120 kg/h) Equipment: • retractable mixing screw for simplified cleaning, recommended for frequent product/color changes • 2 installed rotary valve feeders TD 1 (machine no. 35120030 and 35120035), arranged opposite each other, each with a level switch and a 150-liter hopper. This allows two different dry ingredients to be dosed in parallel or double the dosing capacity for one dry ingredient to be achieved. • Double-walled collection hopper at the mixer outlet with emptying pump SKP 1000 L-VA (machine no. 35120040) • Unheated connecting pipe attached to the side of the lower container section to the hopper for complete emptying via the attached rotary lobe pump SKP 1000 L-VA, can be shut off on both sides with flat flap valves, pipe can be removed via milk pipe fittings and quick-release couplings. • Hot water circulation system with water-water heat exchanger and circulation pump to supply the mixer, collection hopper, emptying pump, and piping to the filling system, for connection to the customer's cold water supply. • Stainless steel control cabinet for housing the power electronics • Visualization and operation are carried out ex works via the HMI of the associated tempering machine; a separate operating panel is not part of the unit. • Completely installed on a mobile stainless steel frame with swivel casters or lifting tabs for moving with a lifting device, frame with ergonomic handle, all media connections are pluggable or with quick-release couplings. This makes the unit mobile and can be switched between several lines. For operation with another control system, an adjustment of the visualization is required; the power electronics are included in the supplied stainless steel control cabinet. Connection requirements: • customer's cold water for the hot water circulation system • 400 V, 3 phases, 50 Hz + neutral + earth Condition, history and process: Year of manufacture 2021, delivery and commissioning by Sollich in week 40/2021, approximately 180 operating hours. Used exclusively for palm oil-free spreads including nut-containing products, stored dry in Wuppertal since the end of 2024, inspection by appointment. Documentation and conformity documents are available. Purchase value in 2021 according to order confirmation: €116,830 (unit complete including rotary valve feeders, emptying pump and stainless steel frame). Sale from business to business with exclusion of warranty, technical specifications according to manufacturer's documents, subject to errors. This nut mixing unit is also available as part of a complete tempering and mixing system (including Turbotemper TE 1600 D and cooling unit), see advertisement ID A22725782.

Year of construction: 2011, condition: used, This is an 115-liter electric braising pan, MAGNUM 3/1 GN, from the premium manufacturer MKN, type Optima 850. The braising pan is a multi-functional device for poaching, boiling, simmering, stewing, and frying. It is emptied via a safety drain valve on the front. The device has been inspected in our in-house workshop and is fully functional. The braising pan has been completely refurbished and is in excellent condition. You will receive an invoice with VAT shown. Our used equipment service for you: 6 months warranty on all electrical parts High-quality branded equipment at fair prices Fsdpfozu Rpcox Albsgg Professional overhaul / inspection & expert cleaning Tested & fully functional - or your money back Flexible shipping or self-collection options Competent advice - before and after purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 Technical data: W x D x H: approx. 1300 x 850 x 850 mm Inner pot W x D x H: 700 x 540 x 250 mm Power connection: V: 400 / kW: 19.2 Serial number: 11203758 Type: 2022705 Year of construction: 2011 Nominal capacity: 115 liters Condition: Used, inspected and fully functional Further information: Multi-functional cooking appliance for poaching, boiling, simmering, stewing and frying Braising pot made entirely of highly corrosion-resistant chrome-nickel steel Frying surface made of special sandwich material (MKN PowerBlock), smooth-ground Heated by SUPRA contact heating elements for optimal heat distribution and short heating times Braising pot with raised edge, tightly welded High thermal capacity ensures uniform heat transfer and minimal temperature fluctuations when the plate is loaded with cold food Standard with electronic "Eco Control" Standard with double-walled hinged lid and mixing tap Emptying via safety drain valve to the front Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Do you have any questions, would you like advice, or would you like to see something on site? You can reach us by telephone during our opening hours: Monday - Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is exclusively subject to our general terms and conditions (GTC).

Condition: used, Year of construction: 1975, Manufacturer : Oskar Krieger Maschinen Model: Fondo Mat Universal 500 Year : 1975 Fgjdpfxjx R Dbto Albjg Type: Melter / process vessel   Classification: ATEX Up/down: hydraulic unit Mixing head rotation: manual Stainless steel coil: liquid and/or steam Mixing: 705 rpm Vacuum and pressure tight lid : -1 / +1 bar Maximum temperature: 140°C diameter of filling port: DN200   Vessel : total capacity: 700L useful capacity: 500L capacity up to tank rim: 615 L pressure: -1 / 3 bar temperature: 130°C recommended drain valve size: DN40   Jacketed : capacity: 68 L pressure: 6 bar temperature: 160°C insulation thickness: 45mm   Weight: 1520 kg Can be combined with the following equipment: / Technical documentation available.    

Condition: used, This listing is for the Grant GD120 Water Bath/Circulator Fedexhfl Ejpfx Albegg The unit is in full working condition and is ready for immediate use The Grant GD120 is a digitally controlled stirred water bath and circulator ideal for laboratory use, offering high precision and flexibility. Here's a breakdown of its features and capabilities: Key Features Immersion Thermostat with Intelligent Control Optimisation (ICO): Enables adaptive PID control for exceptionally stable temperature regulation. Integral Pump: Built-in circulation pump with a maximum flow rate of 17 L/min, allowing both sample immersion and external fluid circulation. User Interface: Equipped with a clear digital display, a rotor plus two-key control, timer function for reaction timing, and visual + audible alarms to notify operators of critical conditions. Preset Temperature Control: Supports one adjustable operating setpoint plus three preset temperature options for fast switching. Safety Features: Includes float-switch low liquid protection and an adjustable over-temperature cut-out for sample and user safety. Liquid Type Selection: Automatically adjusts heater power and temperature parameters depending on chosen liquid (e.g., water, oil, glycol mixtures). Temperature Range & Accuracy Plastic Tanks (P-series): From around ambient +5 °C up to ~99 °C. Stainless Steel Tanks (S-series): From –15 °C up to ~120 °C. High Stability: ±0.02 °C for stable temperature control. Technical Specifications & Obsolescence The GD120 series includes multiple tank sizes: plastic tanks (P5, P12, P18) and stainless steel tanks (S5, S12, S18, S26, S38), offering varied capacities for different lab needs. This series is now considered obsolete, though it remains functional and reliable for many applications. Supporting Documentation & Manual Operating Manual: The GD120 is covered by the general purpose stirred thermostatic baths manual (shared with GD100), outlining temperature settings, calibration procedures, safety guidance, and maintenance. Datasheet Summary: Positioned within the broader Grant Optima product range, the GD120 sits between simpler (GD100, up to 100 °C) and higher-spec models (GR150 up to 150 °C, GP200 up to 200 °C)

Year of construction: 2019, condition: used, We offer this used Megatrex ATREX CD1000 G600 continuous grinding, mixing and dispersing unit (high-shear rotor system). Manufacturer: Megatrex Oy Model: ATREX CD1000 G600 Serial number: 4255 Year of manufacture: 2019 Condition: used Category ID: 507 Machine type: Continuous industrial mixer / disperser The machine is currently equipped with a 355kW motor and a compatible variable frequency drive. If the buyer plans to install a larger motor, we can also sell the machine without the motor and vfd. Fgedpfx Aloy Eyv Aobsg The equipment is located in Lohja, Finland, and is currently not connected to utilities, i.e., is ready for transport. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, tank capacity: 50,000 l, usable tank capacity: 30,000 l, total height: 4,275 mm, inner diameter: 4,000 mm, outer diameter: 4,020 mm, overall weight: 4,250 kg, wall material: stainless steel, wall thickness: 10 mm, operating temperature: 100 °C, Equipment: CE marking, sanitary facilities, Brand new, never commissioned. Professionally decommissioned from an INEOS manufacturing facility prior to first use. Manufactured by Able Engineering, this high-specification sanitary 316L stainless steel pressure vessel is suitable for pharmaceutical, cosmetics, personal care, food, beverage and fine chemical applications. Designed for vacuum and low-pressure service and suitable for installation within ATEX-rated environments. Constructed entirely in 316L stainless steel throughout with 10mm shell and dish walls, dished top and bottom heads, heavy duty tubular stainless steel leg supports with bolt-down base plates, hygienic internal finish < 0.8 Ra, and full hygienic ferrule fittings throughout conforming to ASME BPE / BS3062. Suitable for CIP, excellent condition. Material: 316L Stainless Steel throughout. Working Volume: 30,000 Litres. Shell ID: 4,000mm. Overall Height: 4,275mm. Shell & Dish Wall Thickness: 10mm. Design Pressure: -1.0 to +0.45 Bar.G. Design Temperature: -10°C to +100°C. Empty Weight: 4,250kg. Design Code: PD5500:2018, Cat.3. PED 2014/68/EU certified. Manufacturer: Able Engineering. Serial Number: PXL19785. Factory Tested: July 2021. Nozzles and fittings include 610mm hinged manway with grill, triple CIP sprayball arrangement, inlet connections, vent, pressure relief valve connection, Endress & Hauser hygienic thermowell, dual level switches, level measurement connection, lifting lugs, and earthing boss. Two units currently available, both brand new and never commissioned, sourced directly from the same INEOS facility. Tank saddles available on request for either single use or purchase. Please view our other listings for additional sizes and configurations — all stock is brand new, ex-INEOS, and available for immediate inspection and purchase. Original engineering drawings and full nameplate documentation available on request. Inspection welcome by appointment. Loading and transport can be arranged. Tracht Ltd specialise in hygienic process equipment for the food, beverage, cosmetics, pharmaceutical and chemical industries, with practical experience supporting both batch and continuous manufacturing environments. In addition to process vessels, Tracht Ltd supply and install stainless steel mixing vessels, Silverson high-shear mixers, hygienic lobe pumps, hygienic centrifugal pumps, access gantries, and provide full vessel installation and commissioning services. Whether replacing existing equipment or expanding production capacity, Tracht Ltd can specify, supply and install the right equipment for your application. Please contact us for further information or to discuss delivery and installation options. Fedezhn Rqjpfx Albsgg

Year of construction: 2019, condition: like new (used), machine/vehicle number: 1810001-01, DARTEK TAR 1200/5000 vibrating screen, designed for the efficient sorting and separation of bulk materials in industrial recycling and material processing applications. The unit is equipped with a separation system using a bar-type screen, allowing for flexible separation in multiple stages. • Type: vibrating screen system • Configuration: finger screen (bars) • Application: size-based sorting and separation of mixed bulk materials • Status: available for inspection • Current condition: in industrial condition (or disassembled/stored, if applicable) The system is designed for high-capacity screening operations, allowing for efficient separation of materials according to their size and type. The finger screen is suitable for coarse separation and the handling of bulky or irregular materials. The vibrating system ensures a constant flow of material and optimal screening efficiency, reducing blockages and improving performance in demanding recycling and sorting environments. The equipment is suitable for recycling plants, quarries, and material recovery facilities where reliable and continuous screening performance is required. Fgedpfx Aozcm T Uelbog

Condition: reconditioned (used), Year of construction: 2016, operating hours: 345 h, functionality: fully functional, working width: 1,230 mm, area performance: 8,600 m²/h, overall weight: 1,944 kg, warranty duration: 12 months, water tank capacity: 310 l, sweeping width: 1,230 mm, HAKO SCRUBMASTER B310 R CL TB1230 SCRUBBER NEW HAWKER PERFERCT PLUS 36V 640Ah TRACTION BATTERY (8PZS640) Fgodpfjy Ui Aksx Albeg NEW NEOS 36V 100A CHARGER Manufactured in 2016 with 345 hours on the clock 1230mm cleaning head (TB1230) equipped with three new medium-hard disc brushes for work on any surface. Integrated pre-sweeper with new side brushes and a new cylindrical brush to remove loose dirt before the actual cleaning. New squeegee blades made of high-quality natural rubber are ideal for use on all surfaces. New protective rubbers around the brush head prevent water from splashing outside the machine's contours. The device is equipped with new, durable drain hoses and a new suction hose. New suction turbines ensure high water suction power from the squeegee blade. Each device we offer has individually taken photos; you get exactly what you see. TECHNICAL DATA: Working width (mm): 1230 Squeegee width (mm): 1260 Capacity (m²/h): 8600 Voltage (V): 36 Number of disc brushes (pcs): 3 Working speed (km/h): 7 Clean water tank capacity (l): 310 Dirty water tank capacity (l): 310 Weight without batteries (kg): 935 Weight (kg): 1944 Power (kW): 7.6 INCLUDED: NEW HAWKER PERFERCT PLUS 36V 640Ah TRACTION BATTERY (8PZS640) NEW NEOS 36V 100A BATTERY CHARGER NEW pre-sweeper side brushes - MIX antistatic bristles NEW pre-sweeper roller brush - MIX antistatic bristles NEW 430mm PPL 0.5 disc brushes (3x) NEW 36V 600W suction turbines (2x) NEW drain hoses (2x) NEW suction hose NEW head guard rubbers (2x) Squeegee blade with new rubbers Tenzi Normal 5 fluid 1000 liters - FREE KEY FEATURES: The 310-liter tank with a durable, flexible divider allows for large amounts of cleaning solution, eliminating the need to frequently stop for refills. The machine's design makes it highly maneuverable. A small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise solution extraction from the cleaned surface. The large working width (1230 mm) ensures high surface coverage. The control panel is easy to read and intuitive to use.

Condition: used, General Overview Pasteurising, cooling, chilling, curing, emulsifying, reconstituting, incubating and mixing are all processes essential in the food processing laboratory. The Armfield Multi-Purpose Processing Vessel is capable of carrying out all of these functions as a self-contained,mobile unit. Its mobility allows it to be positioned in the laboratory adjacent to other equipment that it may be acting as a service to, and also makes it easily stowable. The hygienically designed jacketed vessel has a working capacity of between 10 and 15 litres which allows experimentation and demonstrations without the need for large quantities of raw materials. An electrical heating element positioned at the base of the jacket heats water in the jacket which in turn heats the contents of the vessel. This method gives a gentle transfer of heat to ingredients that are often heat sensitive and local 'hot spots' are avoided due to the convective distribution of the heat. Cooling is accomplished by simply metering water from a domestic supply through the jacket. Chilling involves the circulation of chilled water in a closed circuit through an ice bank circulator incorporated in the base of the unit. An emulsifier having a variable speed drive and several options of emulsor head can be lowered into the process fluid. Hands-on experience can be gained by students and full instrumentation allows a complete record of the process to be compiled. An automatic valve changeover system enables uncomplicated operation requiring the student/trainee to simply select the particular process required rather than have to operate an array of manual valves. Description Where necessary, refer to the drawings in Equipment Diagrams section 8. 9.1 Overview The stainless steel jacketed vessel (1) has a polished, hygienic finish and a working capacity of between 10 and 15 litres. Its contents are heated indirectly by cartridge heater (16) in the base of the jacket. The heater is protected from over-temperature by a thermostat (17) adjacent to it. An emulsifier (2) can be lowered into or raised out of the vessel using the locking handle (5). The on/off and variable speed control (14) of this unit are situated on the motor housing and not on the control console. A green running light (7) indicates when the emulsor motor is switched on. The emulsor head (3) can easily be interchanged with any of the alternatives supplied by simply removing the finger-nuts securing the head to the drive shaft. A lid (6) is provided to prevent any airborne contamination during long periods of heat treatment. Chilled water is circulated from an ice bank unit (12) situated beneath the processing vessel. After a period of time required to build up an ice bank, this will provide chilled water to the vessel jacket, cooling the contents to a temperature suitable for storage/curing. The ice bank is usually used after an initial rapid cooling by circulating cold water from a domestic supply. 3-way valves (10) and (11) are used to automatically select either open Fgjdpfjydh Agex Albeg circuit domestic supply cooling or closed circuit chilled water cooling. In both cases the water passes through a flowmeter (13) where the flow rate can be adjusted manually by control valve (14). From the flowmeter, the water enters the base of the vessel jacket after passing through an in-line non-return valve (15). The water leaves the jacket diagonally opposite the inlet, at the top of the vessel. A pressure relief valve is incorpor...

Condition: new, functionality: fully functional, color: other, Year of construction: 2026, Equipment: cabin, As Constmach, we manufacture stationary asphalt plants designed to deliver maximum efficiency, durability, and quality for your construction and infrastructure projects. Thanks to our modern production technologies, our plants, with capacities ranging from 60 to 200 tons per hour, enable you to produce high-quality asphalt mixtures. Each component—the drying drum, mixer, burner, and filter systems—is designed for long life and high performance. This ensures minimum energy consumption, maximum mixture homogeneity, and low maintenance costs during production processes. Key Features: High Capacity: Different models with a production range of 60–200 tons/hour provide the right solution for every project. Flexible Design: Customizable structure according to your project requirements. Quick Installation: Can be put into operation in a short time thanks to the modular system. Advanced Control Systems: PLC-based automation minimizes operator errors and optimizes the production process. Add power to your projects with Constmach stationary asphalt plants. Make a difference in asphalt production with our facilities that offer long-lasting, efficient, and environmentally friendly production advantages. Choose Constmach assurance to achieve quality infrastructure solutions! Why Constmach Stationary Asphalt Plant? Superior Quality: Our stationary asphalt plants offer reliable operation for many years with their high-strength steel structure and durable components. High Efficiency: The production process is faster and more consistent thanks to fully automatic control systems and precise dosing technology. Environmentally Friendly: Bag filter systems with low emission values allow you to produce without harming the environment. Easy Maintenance: Maintenance operations are quick and easy thanks to the modular design. Customer Support: We are with you every step of the way, from pre-sales engineering consulting to after-sales technical support. What Does Constmach Do? Fgjdpfx Aloxp Ut Iebeg Constmach is a leading machine manufacturer offering a wide range of products for the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, rock crushing machines, rock crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: used, Year of construction: 2012, Multiple Function Stir Fryer, A variety of purposes Can fry, season, mix, coat, or bake various foods, such as rice, noodles, vermicelli, vegetable, sesame, peanut, meat, diced and shredded meat, coffee, pea, candy, biscuit, pistachio, herb and etc. Electronic continuously variable speed control. Can rotate clockwise and counterclockwise. Equipped with a special inner rolling barrel, noodles and spaghetti will not get mushy. Fsdpsx Ncr Usfx Albogg Easy to load and unload ingredients. Very good condition. Gas heated. The video is of the factory, not this machine. I can send a video of the machine as well. Price exl. tax. and EXW.

Condition: used, Year of construction: 1958, For sale: an industrial filling and dispensing machine from Gebrüder Höller Maschinenfabrik, Type MB, designed for dispensing and packaging granular and pelletized products. Key information: Fsdpfxezumk As Albogg Manufacturer: Gebrüder Höller Maschinenfabrik Model/Type: MB Application: granular/pelletized products The machine features a robust, mechanical industrial design and is equipped with a large hopper with a mixing system, as well as an extensive dispensing and packaging mechanism. Equipment visible on the machine: large hopper/feed bin, mixer in the hopper, mechanical dispensing system, product feeding system, mechanical packaging system, electric main drive, gears and mechanical drive transmission system, control panel, adjustable working elements, heavy-duty, stable industrial construction. After appropriate adjustment and adaptation to the specific product and packaging type, the machine can be used to package various types of bulk, granular, and pelletized products. Condition: Used machine, in the condition shown in the current photos. Visible signs of use, scratches on the paint coating, and localized corrosion marks typical of long-term operation of an industrial machine. The machine is complete as shown in the photographs. It is currently placed on a pallet and prepared for transport. Options: personal inspection of the machine, obtaining additional information, arranging loading and collection terms. Sales conditions: Selling price: 15,000 EUR Machine available immediately. We invite companies interested in purchasing an industrial filling and dispensing machine to contact us.

Condition: good (used), Mixing Tank, Mixer, Pressure Vessel, Heating Jacket, Chemical Industry, Used Equipment Design: Cylindrical tank with shallow dished bottom and top, equipped with an agitator. The tank bottom and shell are double-walled with a heating jacket. Fjdetrdyrspfx Albjgg The tank lid is removable with a flanged bolt connection. The lid has a cleaning opening. Material Quality: Carbon steel with painted surface. Manufacturer: Robert Hinkel & Co Type: 9601 Volume: 200L Operating Pressure: 3 bar Electrical Data: 380V; 0.75kW; 2.0A