Used Ump Bp 500 A for sale (78,130)

Condition: used, Year of construction: 2010, machine/vehicle number: 10A46 & 10A47, functionality: limited functionality, power: 110 kW (149.56 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 160 mm, cutting width (max.): 650 mm, total length: 20,000 mm, total width: 2,000 mm, total height: 2,100 mm, table height: 850 mm, LIMITED-TIME OFFER. Manufactured in 2010 by the renowned Italian brand A. Costa Righi, this professional woodworking setup, comprising the LEONE heavy-duty multi-ripsaw and the MAXI-CUT cross-cutting machine, is currently available in good to moderate overall condition, although it is currently stored partially disassembled in our warehouse. Ljdpszxx Dvofx Ab Aehn

Condition: used, Metering pumps, including valves, 20 pieces. Ljdpezdpu Nofx Ab Aehn

Condition: good (used), Year of construction: 2020, functionality: fully functional, For sale: A selection of ABB robots and turntables. Available models listed below: Ledpsz Sqhfofx Ab Aehn ABB Robots ABB IRB6700-155 MH IRC5 ABB IRB6700-200 SW IRC5 ABB IRB6700-235 SW IRC5 ABB IRC5M2004 ABB Turntables (Positioners) ABB IRBP B-750 ABB IRBP C-500 ABB IRBP K-300 L3150 D1200 ABB IRBPM2004K-300

Condition: good (used), Sumbel Herold 500 Gluing Machine This machine is like new, fully functional and ready for production. Ledpfx Aezz Hh Ueb Ashn This is the most valued brand among small laminating machines. Ideal for producing covers, decorative packaging, and more. Made in Germany. The machine operates on hot glue. It features a built-in heating plate and a water bath. Brass rollers. Infinitely adjustable: glue thickness, gap width, and speed. Working width: 500mm Power supply: 380V Weight: 60kg

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,000 kg, workpiece height (max.): 375 mm, Fully refurbished OPS Ingersoll Gantry 500 Wire EDM Machine – in top technical and visual condition The machine underwent a comprehensive and professional overhaul in our facility and is in very good condition both technically and visually. During the overhaul, the machine was disassembled by over 70%. All relevant wear parts were carefully inspected and replaced if necessary, including ball bearings and drive spindles. Subsequently, a complete geometric survey, alignment, and additional check using a laser measuring system were performed. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. All hoses, including hydraulic and compressed air hoses, were completely replaced. In addition, the machine was completely repainted and now presents itself in a very well-maintained visual condition. The generator and control system were cleaned and technically inspected. The generator's air conditioning unit was also cleaned to ensure reliable cooling and stable operation. Finally, the machine underwent an extensive erosion test in accordance with the quality and testing specifications of OPS Ingersoll. The machine is ready for immediate use and is ideal for reliable production operations. Technical data: Ingersoll (OPS Ingersoll) Wire EDM Machine OPS INGERSOLL GANTRY EAGLE 500 Year of manufacture: 2009 Control system: EAGLE Powertec PC/NC 2060 Lhsdjyzw I Iopfx Ab Ajn MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec Handheld - multifunctional handheld device Manual erosion with Powertec Handheld High-speed jump max. 18 m/min Generator power 60 Amps, EAGLE Powertec Travel ranges (X, Y, Z): 525 x 400 x 450 mm Electrode changer: 20-position pick-up plate changer Work tank (W x D x H): 770 x 670 x 440 mm Work table (W x D): 750 x 650 mm Load capacity: 1,000 kg Accessories: CO2 fire extinguishing system Integrated cartridge filter system Special equipment: Linear measuring system in all axes (Z as standard) 16.10.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, SPINNER H500-A HORIZONTAL CNC MACHINING CENTER SPINNER H500-A (YEAR OF MANUFACTURE 2012) Lsdpfsz Ri Rvsx Ab Ajhn Travel ranges: X = 700 mm, Y = 650 mm, Z = 650 mm Horizontal milling and drilling Multi-sided machining in conjunction with a rotary table as the 4th axis Dual-pallet changer, 2 x 500 x 500 mm 60-tool changer, automatic workpiece measuring probe Glass scales in all axes, laser tool measurement SK 40 with 12,000 rpm and 40 bar through-spindle coolant

Condition: ready for operation (used), Year of construction: 1995, operating hours: 51,658 h, functionality: fully functional, punching force: 22 t, sheet thickness (max.): 8 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, TECHNICAL DETAILS Sheet width: 2,500 mm Sheet length: 1,250 mm Sheet thickness: 8 mm Ljdpfx Aey U U Npob Aohn Punching force: 220 kN MACHINE DETAILS Operating hours: 51,658 h Machine weight: approx. 11,050 kg EQUIPMENT - TRUMPF Sheetmaster

Condition: good (used), functionality: fully functional, Year of construction: 2006, The machine is being sold due to a plant modernization. Only 3,000 operating hours for laser cutting. Immediately available. Inspection and demonstration under power are possible by appointment. Technical data: Manufacturer: TRUMPF Model: TruLaser Tube 5000 (T01) Year of manufacture: 2006 Control system: Siemens Sinumerik 840D Laser type: CO₂ laser TruFlow Working area, tube length: 6,500 mm Lhsdpfozlr Rpjx Ab Aon Max. round tube diameter: 150 mm Max. rectangular profile / circumscribed circle: 150 mm Max. material weight: 20 kg/m Max. workpiece weight: 130 kg Automatic tube support Self-centering clamping system

Condition: used, functionality: fully functional, In this listing, you are purchasing a second-hand ‘Keyence VL-500’ 3D coordinate measuring machine Items for sale: 1x Keyence VL-500 with the following features Includes software Includes additional software Includes a laptop for operation Includes a calibration plate Ready for immediate use Lhsdpfoy Iaa Tsx Ab Aon Condition: This listing is for a second-hand device, which may show signs of wear (minor scratches or discolouration). The unit has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the unit during our business hours. Please arrange an appointment to do so! Seaworthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: excellent (used), For sale: Bernardo KFM 500 M edge chamfering machine, designed for precise chamfering and deburring of parts made of steel, stainless steel, aluminum, and other metals. This machine is ideal for preparing parts for welding, removing sharp edges, and creating even chamfers. Its robust construction and adjustable chamfering angle ensure accurate and repeatable machining. The machine is sold with the operating manual and a set of cutting blades, as shown in the pictures. Technical data: Manufacturer: Bernardo Country of manufacture: Austria Model: KFM 500 M Year of manufacture: 07/2019 Machine number: PWA-190707 Type: edge chamfering machine Motor power: 0.55 kW Power supply: 400 V Frequency: 50 Hz Rated current: 1.48 A Recommended protection: C16 Weight: 33 kg Application: The device is designed for: chamfering edges, deburring parts, preparing material for welding, machining steel, stainless steel, and aluminum, creating precise chamfers for welds. Lhodpfx Aboz Sm U Ts Asn Included: Bernardo KFM 500 M chamfering machine, operating manual, set of cutting blades (shown in the pictures), other items shown in the pictures. Condition: The device is used and in good visual condition. Normal signs of wear and tear are visible, consistent with its use. The machine is sold exactly as it is and with all the components shown in the pictures.

Condition: new, Type: S 500 l 2P-V Complete stainless steel Hopper capacity 500 liter Double working shafts Rotation of shafts in both directions Vacuum: 0,04 – 0,06 mpa Electric power: 5.6 kW Voltage: 380 V / 50 Hz Discharging pneumatic flaps PLC + Touchscreen control Delay start 99 programs Installation dimensions of the machine in cm: Lodpfx Abshd U R Ue Aohn Width: 160 Lenght: 95 Height: 142 Delivery time: after advanced payment, one working day

Year of construction: 2014, condition: excellent (used), functionality: fully functional, machine/vehicle number: VT 2573, MACHINE SPECIFICATION Height of centres 195mm Swing over bed 400mm Swing over cross slide 246mm Swing in gap 585mm Width in front of faceplate 165mm Bed length between centres 1250mm Spindle speeds (infinitely variable) 0-2500rpm Spindle nose mounting (Camlock) D1-6 Spindle bore 54mm Spindle motor 7.5kW Ledsz Im Nijpfx Ab Aehn Width over bedways 318mm Travel of cross slide 250mm Travel of top slide 130mm Travel of tailstock barrel 178mm Taper in tailstock barrel No. 5 MT Approx. Weight 1800Kg Machine in Metric execution Machine Equipped with Acu-Rite 2 Axis Digital Readout System 3 Jaw chuck Quick change toolpost 5 Position turret Bedstop Single Bedstop Saddle guard Lighting Coolant system Chuck guard Rear splashguard

Condition: used, functionality: fully functional, Year of construction: 2021, control type: CNC control, degree of automation: automatic, controller manufacturer: KUKA, controller model: KRC4, laser type: fiber laser, laser source model: TruDisk 4001, type of cooling: water, Equipment: cooling unit, documentation/manual, dust extraction, safety light barrier, - Trumpf TruLaser Weld 5000 - 2021/2022 Year Model - Advanced "turnkey" robotic welding cell - 6-axis industrial robot arm - Enclosed safety housing - Multi-weld techniques & Intelligent Assist System to detect workpiece placement - AI Welding Robot - Serial No. 1422667 - Robot Gantry / Linear Unit KUKA KL 4000 - Serial No. 153080 - Two Axis Workpiece Positioner Model DKP-400 V5 -Serial No. 154987 - TruDisk 4001 - High-power solid-state disk laser source - Serial No. L5211E3364 - Technotrans Fluid/Water Chiller System Model RL 16/0 SK V2 NEC Grav MIZ 1" - Serial No. 40000135731 - KUKA Robot Controller KRC4 -Serial No. 3121117 - Rittal TopTherm Blue E Wall-mounted cooling system - Serial No. 2021K000144111 - Camfil Air Pollution Control Dust Extraction System - Model MF 8-8 A2 Serial No. 10011175 Lodpfezy T Tzex Ab Aehn - Two Station Index Rotary Positioner - Equipment available after project completion, available from October 2026 - Within the machine price: Machine operational software comes with the machine - Available at additional costs: Programming solution software available - Other opportunities at additional cost: Extensive Research data library available for weld parameters including some structurally tested and certified parameters. Operator & programmer training available. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 2008, TruBend 5085 press brake Lhjdsy Shc Djpfx Ab Aen

Condition: used, Year of construction: 2005, Punching capacity 220 kN plate thickness 8 mm working area 2535x1280 mm sheet thickness for stainless steel 4-6 mm Ljdpozk Rfiofx Ab Ajhn

Condition: good (used), GURUTZPE second hand lathe Lhedpfxeh Ryfhs Ab Ajn Brand: GURUTZPE Model: Super-A 3000/500 No.: 232 Distance between points: 3000mm Cane pitch: 325mm Center height: 500mm Maximum turning diameter: 1400mm Maximum diameter on bench: 1000mm Maximum diameter over trolley: 740mm Speeds: 16 Visualizer: FAGOR Model: NV 300T It includes: - Dish - Lunettes

Condition: excellent (used), Price quoted per unit. For sale: Karl Tränklein ZW 500 adhesive roller coating machine. This device is designed for the uniform application of adhesive to paper, cardboard, corrugated board, leather, fabrics, and other sheet materials. Thanks to its precise roller arrangement, it ensures an even layer of adhesive and high-quality results. The machine features a robust, German-made construction and adjustable pressure and adhesive application rate. It is ideal for bookbinding shops, printing plants, and packaging production. Lsdpfjz Sm Uwex Ab Aohn Technical specifications: Manufacturer: Karl Tränklein GmbH Model: ZW 500 Year of manufacture: 1990 Serial number: 8083 Working width: 500 mm Power supply: 380 V / 50 Hz Motor power: 0.25 kW Adjustable adhesive application rate Chrome-plated working roller Stable, cast iron construction Made in Germany Visual condition as shown in the pictures.

Condition: used, power: 6.77 kW (9.20 HP), Year of construction: 2025, operating hours: 23 h, Powerful tracked dumper in top condition for sale! The machine is in very good condition and ready for immediate use. Condition: Used, very good Operating hours: 23h Lhedpfx Abowh Nuao Aon Year of manufacture: 2025 SCHORR tracked dumper RR500DHKAH PRO – Discover the advantages: - 9.2 HP four-stroke engine - Self-propelled and powerful chain drive - Hydraulic scissor lift (discharge height 1.44m) - 500kg payload - Large and high-quality tipping trough with a large tipping angle - Foldable rider platform as standard - 6+2 gears SCHORR tracked dumper DHKAH PRO with hydraulic tipping, rider platform, and scissor lift The SCHORR tracked dumper RR500DHKAH features a hydraulic tipping drive and a payload of 500kg, as well as a powerful 9.2 HP single-cylinder 4-stroke gasoline engine. The special feature of the RR500DHKAH is its hydraulically controlled scissor lift function. This allows you to eject the material up to a height of 1.44 m – ideal for trailers, containers, or other elevated surfaces. Thanks to its slim design (700 mm), the mini dumper can also drive through narrow paths and narrow doorways, making it an extremely flexible means of transport. The mini dumper's powerful track drive allows you to easily negotiate even rough terrain, inclines, and curbs. The rubber tracks provide secure footing in any work area. Raising and lowering the tipping body/box is effortless and effortless thanks to the hydraulic tipping drive, even when fully loaded. With a robust body made of heavy-duty sheet metal and a straight discharge that ensures quick and easy discharge, this dumper is a must-have for anyone who needs to transport heavy loads. Tipping on slight inclines is also no problem. The large tipping angle ensures that even fully loaded skips are completely emptied without manual assistance. This saves time and effort, making the motorized wheelbarrow an indispensable tool for anyone who values efficiency and performance. TECHNICAL DATA: Manufacturer (abbreviation): SCHORR Manufacturer's type designation: RR500 Model: DHKAH Load capacity: 500 kg Tilt drive: Hydraulic (stepless) Drive: Chain Weight without/with packaging: 363 / 388 kg Drivetrain Engine: Air-cooled single-cylinder four-stroke engine (OHV) Starter: Recoil starter Power: 9.2 hp Transmission: 6 forward gears / 2 reverse gears Speed Forward gear: max. 8 km/h Reverse gear: max. 5 km/h Fluids Fuel tank capacity: 6 L (unleaded gasoline) Hydraulic oil tank capacity: 3 L (ISO VG 32) Transmission oil tank capacity: 1.5 L (SAE 80W-90) Engine oil tank capacity: 0.9L (15W-40) Max. hydraulic oil flow rate: 9L/min Basic dimensions Total length of platform folded: 1900mm Total length of platform unfolded: 2100mm Total width (including chain): 710mm Total height: 1050mm Tank dimensions (internal dimensions): 740 x 665 x 435mm Tank dimensions (external dimensions): 1060 x 710 x 520mm Track width: 710mm Loading volume (liquid): ~ 200L Loading volume (heaped): up to 370L (depending on load) Drive chain dimensions: 180 x 60 x 38mm Ground clearance: 120mm Packaging dimensions: 1890 x 740 x 1220mm Filling height Side: 1030mm Front: 810mm Discharge height min./max.: 810 / 1440mm

Year of construction: 1996, condition: ready for operation (used), A CNC punching and laser machine from Trumpf requiring repair, including laser source and high-frequency generator, is available. Cutting force: 220kN, laser power: 1500W, clamping power: 11kW, weight: approx. 18000kg. Error message: NCK deleted and buffer battery empty. An on-site inspection is possible. Lhedpfx Abjzfaalo Aen

Condition: like new (used), Year of construction: 2025, functionality: fully functional, operating hours: 8 h, power: 3 kW (4.08 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 360 mm, cutting width (max.): 500 mm, control type: PLC-controlled, roller diameter: 360 mm, pivoting range: 60 °, actuation type: electric, rotational speed (max.): 150 rpm, rotational speed (min.): 15 rpm, total height: 2,340 mm, total length: 2,600 mm, total width: 2,940 mm, overall weight: 1,500 kg, table height: 800 mm, Equipment: CE marking, documentation/manual, motor brake, PEGAS-GONDA 360x500 A-CNC-R | CNC AUTOMATED MACHINE | 33% SAVING AUTOMATIC MITER BANDSAW – DIRECTLY FROM THE MANUFACTURER! We are selling an automatic bandsaw PEGAS-GONDA 360x500 A-CNC-R directly from our showroom. The machine is designed for economical, automatic sawing of profiles, tubes, and solid materials. Automatic material feed and programmable control enable efficient series production. Demonstration machine from our showroom. For sale due to the replacement of our exhibition machines. SPECIAL PRICE – 33.3% SAVING! - New price: 34,398 EUR - Our price: 22,950 EUR plus VAT - You save 11,448 EUR! TECHNICAL DATA - Automatic hydraulic bandsaw - Cutting range 90°: round 360 mm - Rectangle 90°: 500 × 360 mm - Cutting range 45°: round 360 mm - Rectangle 45°: 440 × 240 mm - Cutting range 60°: round 300 mm - Rectangle 60°: 290 × 280 mm - Automatic miter cuts up to 45° right - Semi-automatic miter cuts up to 60° right - Saw band: 4780 × 34 × 1.1 mm - Band speed: 20–100 m/min - Main motor: 3.0 kW - Weight: approx. 1,500 kg - MITSUBISHI FX5U PLC control - MITSUBISHI GT2104 color touchscreen - Automatic hydraulic material feed - Hydraulic material clamping - Programmable quantities and cutting lengths 6 MONTHS MANUFACTURER'S WARRANTY Warranty on spare parts and labor. In the event of a recognized warranty claim, the buyer will bear the travel and transport costs of the technician. Service rates: - Travel costs: 1 EUR/km (round trip) - Travel time: 25 EUR/hour - Technician work: 50 EUR/hour (outside the warranty) DELIVERY AND SERVICE Price: 22,950 EUR net, FCA Slavkov u Brna, Czech Republic (Incoterms 2020). Available immediately! We offer transport, commissioning, and operator training for an additional fee at our service rates. ORIGINAL ACCESSORIES A wide range of PEGAS-GONDA original accessories is available (see accessories price list). We particularly recommend matching roller conveyors for efficient material handling. We will gladly prepare a quotation for a complete sawing station. Lhjdps Aa Drxofx Ab Aon YOUR ADVANTAGES: - Automatic material feed - Miter cuts up to 60° - MITSUBISHI PLC control - Directly from the manufacturer - 11,448 EUR price advantage - 6 months warranty - Original manufacturer service - Available immediately Contact us for more information or to arrange a visit! PEGAS-GONDA – directly from the manufacturer.

Year of construction: 2008, condition: ready for operation (used), A CNC laser cutting system Trumpf including RotoLas and Liftmaster is available. Laser source: TruFlow 5000, laser type: CO2 laser, laser power: 5000W, travel X/Y/Z: 3000mm/1500mm/115mm, max. material thickness structural steel/stainless steel/aluminium: 25mm/25mm/15mm, positioning accuracy: +/-0.1mm, repeatability: +/-0.03mm, max. axis speed: 200m/min, max. simultaneous speed: 300m/min. Machine dimensions X/Y/Z: approx. 11100mm/4600mm/2400mm, weight: approx. 12000kg, operating hours: 55462h, laser hours: 24430h, beam hours: 12742h. Hours status as of 01/2026. Documentation available. On-site inspection is possible. Expected to be available from January 2027. Lhjdpfx Abox Tumxe Ajn

Condition: excellent (used), Year of construction: 1988, For sale: an industrial vibratory polishing machine from the renowned SPALECK brand (Max Spaleck GmbH & Co. KG, Bocholt, West Germany) – model VAT-240. This robust machine was manufactured in 1988 and is designed for professional finishing of parts. The machine is ideal for: • Polishing surfaces • Removing burrs after machining • Rounding edges • Cleaning and preparing surfaces for painting or electroplating It works with various types of abrasive media – ceramic, plastic, or steel – depending on the type of parts being processed. Technical specifications: Lhjdpfxjz Slake Ab Asn • Model: VAT-240 • Year of manufacture: 1988 • Maximum load: 500 kg • Power supply: 3-phase, 380 V, 50 Hz • Control voltage: 220 V • Rated current: 20 A • Protection: 25 A • Total power: 18.1 kW • Factory serial number: 63712 • Included: control cabinet with START/STOP buttons, emergency stop switch, and ammeter The unit is complete, in good technical condition, and ready to operate after connection. It features a robust construction, a parts outlet with a rubber cover, and a convenient abrasive media replacement system. SPALECK is a German brand known for producing reliable vibratory finishing machines, which are highly valued in facilities worldwide.

Condition: new, Year of construction: 2024, The SCHORR RR500 DHKB 2 PRO track dumper is a versatile machine powered by a powerful 270 cm3 4-stroke petrol engine with 9.2 hp. This power enables the dumper to operate effortlessly even in outdoor applications and offers sufficient power for demanding tasks. Advantages of the SCHORR RR500DHKA2 track dumper: Ledpfxou Th Ekj Ab Aehn -- Powerful 9.2 hp four-stroke engine -- Robust chain drive for high traction -- 500 kg payload -- Removable side walls for more loading volume -- Automatic opening of the front when tipping -- Folding ride-on platform as standard -- 6 forward and 2 reverse gears The box body made of robust sheet steel is equipped with removable side walls so that the loading area can be flexibly enlarged and tipping operations are possible without any problems even on slight inclines. A generous tipping angle ensures that even fully loaded skips can be emptied completely without the need for manual assistance. A major advantage of the dumper is the automatic opening of the front of the tipper body during the tipping process. This ensures particularly easy and convenient unloading, even when fully loaded. The hydraulic tipping drive enables the tipper body to be raised and lowered effortlessly, while the extra-large hydraulic oil tank with integrated oil filter extends the service life of the machine and reduces maintenance requirements to a minimum. The powerful track drive ensures that even uneven terrain, inclines and kerbs can be mastered with ease. The durable rubber tracks provide a secure footing in any working environment. Technical data: Manufacturer (abbreviation): SCHORR Type designation of the manufacturer: RR500 Model: DHKB2 Load capacity: 500kg Tilt drive: Hydraulic (stepless) Travel drive: Chain Weight without/with packaging: 305kg / 335kg Drive system Engine: Air-cooled 1 cylinder four-stroke engine (OHV) Starter: Reversing starter Power: 9,2PS Gearbox: 6 forward gears / 2 reverse gears Speed: forward gear Forward gear: max. 8km/h Reverse gear: max. 5 Liquids Fuel tank capacity: 6L (unleaded petrol) Hydraulic oil tank capacity: 3L (ISO VG 32) Transmission oil capacity: 1.5L (SAE 80W-90) Engine oil tank capacity: 0.9L (15W-40) Basic dimensions Overall length platform folded: 1870mm Overall length platform unfolded: 2105mm Overall width (incl. chain): 770mm Overall height: 1050mm Container dimensions (inside): 1040 x 700 x 300mm Container dimensions (outer dimensions): 1100 x 755 x 310mm Load volume (painted): ~ 218L Load volume (heaped): up to 500L (depending on load) Drive chain dimensions: 180 x 60 x 38mm Packaging size: 1600 x 770 x 1270mm Filling height with walls: 740mm without: 445mm It goes without saying that all spare parts are always in stock and available quickly if required. If technical support is required, our trained team is at your side. We can also carry out repairs for you in our own workshop. We at SCHORR will be happy to answer any questions you may have about our motorized wheelbarrows. You can reach our competent team by phone or email. We look forward to hearing from you and being able to help you with advice.

Condition: excellent (used), For sale: Mannesmann Dematic AG electric chain hoist, model DKUN 5-500 K V2. A robust, industrial-grade hoist manufactured in Germany, designed for lifting loads. The set includes a chain and hook, as shown in the pictures. Technical specifications: Manufacturer: Mannesmann Dematic AG Type: DKUN 5-500 K V2 Lifting capacity: 1/1 – 0.50 t / 2/1 – 1.00 t Lifting speed: 15.0 / 7.5 m/min Chain length: 11 m Motor power: 1.40 kW Power supply: 380–400 V Frequency: 50 Hz Current: 4.00–4.20 A Motor speed: 2720 rpm Protection rating: IP55 Chain: 5.3 × 15.2 8DK Factory number: 63159709 Ident-No.: 836 334 44 Lhsdpfx Aoz Sny Eeb Aon Year of manufacture: 2000 Weight: approx. 39 kg Country of manufacture: Germany Condition: Used hoist, in the condition shown in the pictures. Important information: one of the mounting bracket/ear elements is partially broken, which is clearly shown in the pictures. This damage does not affect the operation or performance of the hoist. Sold exactly as shown in the pictures. PRICE INDICATED IS FOR 1 UNIT.

Condition: used, Year of construction: 2011, Offer: High-Precision and Versatile Punching/Nibbling Machine Boschert Compact 500 CNC Z (Year 2011) – Ideal for Flexible Sheet Metal Processing! We are selling a powerful and reliable punching/nibbling machine from the renowned manufacturer Boschert, which impresses with its advanced features and precision. This machine is the ideal solution for a wide range of punching and nibbling tasks, from one-off pieces to large-scale production. Key Features: • Manufacturer: Boschert • Model: Compact 500 500 x 1000 CNC Z • Year of manufacture: 2011 Lsdpfx Ajx Uxtfsb Ajhn • Intuitive CNC Control: Multi-axis Ladob controller with graphical user interface for easy programming and visualization of machining processes. • Extended work area for greater flexibility: o X-axis: 0–2000 mm (enables processing of long workpieces) o Y-axis: 0–750 mm (offers ample space for wide sheet metal) • Ultra-fast tool change: Trumpf quick-change tool system ensures minimal downtime and maximum productivity. • Universal tool compatibility: Compatible with the full range of Trumpf tools – reduce your tooling costs and expand your capabilities. • Secure and precise material handling: o Collet clamping: Ensures a firm grip of the workpiece during processing. o Non-contact repositioning up to 9999 mm: High-precision repositioning device with 2 sheet holders for efficient processing of even very long sheets without loss of position. • Dynamics and precision at their best: o Maximum positioning speed: 60 m/min for fast processing cycles. o Infinitely variable feed rates: Optimal adjustment of processing speed to the material and task. o Highest positioning accuracy: ± 0.05 mm for precise results on every workpiece. • Robust and durable construction: o Y-axis drive: Two ball screw-driven carriages located left and right beside the machine table ensure maximum stability and torsional stiffness. o X-axis drive: Ball screw and four recirculating ball guides guarantee precise and smooth movement. • Specialized equipment for small parts: Stop plate (L-bracket) for secure processing of small parts that can no longer be safely held by the collets – for maximum flexibility and minimal scrap. Condition: The machine is in very good, well-maintained condition and has been serviced regularly. It is immediately ready for operation and offers excellent performance for your sheet metal processing needs.