Used Teka Welding Mist Extraction for sale (9,395)

Condition: good (used), MIG/MAG hose package, MIG/MAG welding torch, welding robot hose package, intermediate hose package, robot hose package, welding fume extraction, flue gas extraction torch -MIG/MAG hose package: with welding fume extraction -Length: 4.3 m -water cooled -Quantity: 2x hose package available -Price per piece -Transport dimensions: 600/500/H110 mm / 600/540/H130 mm Hnjdpouahwgofx Aikok -Weight: 5.2 kg/piece

Condition: as good as new (ex-display), Year of construction: 2026, SRF master figure left 2 m suction arm Scope of application Low smoke and dust Sporadic usage Hnedpfx Aiedqzbrjkjk Use Little run the extractor hood required Flexible by additional hose connection rear Properties Safe operation through filter monitoring Extractor hood 360 degree rotating and swivelling Push handle and cable holder Procedure filter type disposable filter filter surface approx. 12 m² ᐳ 99% filtration efficiency 3-stage filter material glass fibre welding smoke off vagina class W3 Additional filter two prefilter basic data suction capacity Max 950 m ³/h diameter extraction arm Ø 150 mm length extraction arm 2 m diameter suction connection Ø 150 mm electrical connection 230 V / 50 Hz motor 1,1 kW sound pressure level 72 dB(A) dimensions (W x D x H) 705 x 655 x 900 m m weight approx. 71 kg

Condition: new, Year of construction: 2025, Paint mist extraction AL-KO colour Jet 1 Hnedpfjbumr Sex Aiksk Paint mist extraction ready for use, 1 m2 filter surface with pre-and fine filter,. Connection diameter 300 mm, motor 1.5 KW ex (suitable for setting up In zone 22 according to ATEX), switch 1 step + 5 m cable with Plug and Throttle body. Compact space-saving design of sheet steel Chassis with wheels Indirect exhaust near the ground Fully assembled With connecting cable and phase change Setup Adjustable side panels Optimized spray mist recording by patented front sheet cover Long filter service life High-performance fans with low noise level Filter wall with special mats Exhaust socket with integrated butterfly valves Motor power: 1,5 KW Speed: 1400 RPM Nominal flow rate: 4600 m3/h Pressure: 500 PA Dimensions: (W * H * D) 1025 * 1437 * 1214 W = 2000 mm with side panels Filter surface: 1 m2 Weight: 175 kg

Condition: as good as new (ex-display), Year of construction: 2026, SRF Maxi. (Picture on the right) 3 m suction arm Scope of application Medium smoke and dust Regular usage Use Little run the extractor hood required Contamination free filter change Safe operation due to phase sequence detection High efficiency due to long Service life of the filter Properties Safe operation through filter monitoring Hedpfsdqzcvox Aikonk Extractor hood 360 degree rotating and swivelling Automatic start/stop system (optional) Workplace lighting (optional) Technical data Procedure 2-speed Filter type disposable filter Filter surface approx. 20 m ² ᐳ 99% filtration efficiency Filter material of non-woven polyester Welding smoke off vagina class W3 Additional filter pre-filter (ALU knitted fabric) Basic data suction capacity Max 1,100 m³/h Extraction arm diameter Ø 150 mm Extraction arm, length 3 m Diameter suction connection Ø 150 mm -. Power supply 3 x 400 V / 50 Hz Motor 1,1 kW Noise level 70 dB(A) Dimensions (W x D x H) 790 x 815 x 1080 mm Weight 71 kg approx. 120 kg

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, type of input current: AC, overall weight: 45 kg, input voltage: 230 V, total width: 4,064 mm, total length: 7,366 mm, total height: 6,604 mm, filter area: 5 m², suction capacity: 180 m³/h, pressing: 36,000 Pa, power: 1.5 kW (2.04 HP), The device has seen little use and is in very good condition and fully functional. Specifications The ClearO2 W100 is designed to complement the 8XE MIG and 8XR MIG cobot extractors from Translas. With the combination of the welding fume burners of the 8XE MIG and 8XR MIG cobot extractors and the ClearO2 W100 devices, we capture between 90% and 98% of the welding fumes at the source and filter them with an efficiency of > IFA 99.8%. The compact device is perfect for relocation in the workplace due to its low weight - only 45 kg - and its four wheels, two of which are lockable. Automatic cleaning The ClearO2 W100 device has an automatic cleaning function by reverse compressed air pulse. As soon as the negative pressure in the filter is too high, the device automatically starts cleaning the filter. A manual cleaning function can be performed by pressing a single button. The automatic start/stop function to save energy and synchronize the device with the 8XE MIG and 8XR MIG Cobot extraction units is standard on the ClearO2 units. As soon as the gun is removed from the specially designed torch holder, the machine starts working automatically. Hnsdpfx Aovpgkceiksk Continuous duty motor The unit's electric motor is designed to work continuously without losing power. Thanks to the automatic cleaning function and simplified motor system, the maintenance of the unit is minimal, making it durable and time-saving. With a filter area of 5 m², this is one of the most efficient units of its size with the largest filter. The filter is disposable and has an active surface with an efficiency of: IFA >99.8%. Lightweight and mobile The ClearO2 W100 units are designed to meet the needs of a single welder who needs to change his workplace. Examples of such applications include shipbuilding, wind tower construction, tank building and other similar manufacturing industries. The four wheels with two locks and the low weight - only 45 kg - allow the welder to easily move the device to the next work location. [Source: translas]

Condition: good (used), Motor : 1.5 kW Quantity : 2 pieces Hedpfxehc Syps Aikonk Price/ piece

Condition: used, Year of construction: 2001, Used machine Equipment and technical data: - Working area width x height: 2400 x 1600 mm - Air capacity: 7000 m³/h - Motor: 2.2 kW - Exhaust duct: 400 mm - with energy-saving stand - with supply air channels Note: The Ex-lights shown in the pictures are not included in the scope of delivery! Availability: short-term Hnsdoxdpl Uepfx Aiksk Location: 63934 Röllbach

Condition: used, We are offering a welding fume extraction unit from the brand Euromate. Please contact us for a quote. Hjdsxz R Aiopfx Aikjnk

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 0650173823, overall weight: 87 kg, filter area: 10 m², Specification: Operating temperature range: 0–+50°C Operating voltage: 400V/50Hz Control voltage: 24V DC Connected load: 5 kW Max. blower air flow: 580 m³/h Max. achievable negative pressure: 37,500 Pa Max. device air flow: 520 m³/h Hodpfswq R Dbsx Aikenk Min. air flow: 100 m³/h The Fumator Minivac 500D is a compact and reliable extraction system that efficiently removes smoke, dust, and fumes from industrial workplaces. Its space-saving design allows for easy integration into various production processes. With its innovative technology, it ensures a clean and safe working environment while remaining pleasantly quiet and low-maintenance during operation.

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 1010215351, overall weight: 95 kg, filter area: 10 m², control cabinet width: 530 mm, control cabinet length: 760 mm, control cabinet height: 1,130 mm, Specification: Operating Temperature Range: 0 – +50°C Operating Voltage: 400V/50Hz Control Voltage: 24V DC Hedpfx Aijwq Rvwskjnk Connected Load: 7.5 kW Max. Device Airflow: 750 m3/h Min. Airflow: 150 m3/h Max. Vacuum: 380 mbar The Fumator Minivac 500D is a powerful and reliable extraction system designed to effectively remove smoke, dust, and fumes from industrial work areas. Its compact design enables flexible integration into various production environments, while its efficient technology ensures a clean and safe working atmosphere.

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 3520173969, overall weight: 87 kg, filter area: 10 m², control cabinet width: 530 mm, control cabinet length: 760 mm, control cabinet height: 1,130 mm, Specification: Operating temperature range: 0–+50°C Operating voltage: 400V/50Hz Control voltage: 24V DC Hjdpfx Aowq Rt Aoiksnk Connected load: 5kW Max. blower air flow rate: 550 m3/h Max. achievable negative pressure: 37,500 Pa Max. device air flow rate: 500 m3/h Min. air flow rate: 100 m3/h The Fumator Minivac 350D is a reliable and efficient extraction system specifically developed for the removal of smoke, dust, and fumes in industrial work environments. Thanks to its compact design, it can be flexibly used in various production sectors.

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 0650173822, overall weight: 87 kg, filter area: 10 m², Specification: Operating temperature range: 0 to +50°C Operating voltage: 400V/50Hz Control voltage: 24V DC Hnedpfxswq Ryvj Aiksk Connected load: 5 kW Max. blower air volume: 580 m3/h Max. achievable negative pressure: 37,500 Pa Max. device air volume: 520 m3/h Minimum air volume: 100 m3/h The Fumator Minivac 500D is a robust and efficient extraction system, specially designed to reliably filter smoke, dust and fumes from industrial workplaces. Thanks to its space-saving design, it can be flexibly integrated into various production environments. The advanced technology ensures a clean and safe working environment, while operation remains quiet and maintenance is minimal.

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 0650173824, overall weight: 87 kg, filter area: 10 m², Specification: Operating temperature range: 0 to +50°C Operating voltage: 400V/50Hz Control voltage: 24V DC Connected load: 5 kW Max. blower air volume flow: 580 m³/h Hnjdpfjwq Rzgsx Aiksk Max. achievable negative pressure: 37,500 Pa Max. device air volume flow: 520 m³/h Min. air volume flow: 100 m³/h The Fumator Minivac 500D is a powerful and reliable extraction system designed to efficiently remove smoke, dust, and fumes from industrial work areas. Its compact design allows for flexible use in various production environments. With its advanced technology, it ensures clean and safe air quality while operating quietly and requiring minimal maintenance.

Condition: used, filter area: 252 m², suction capacity: 12,000 m³/h, Dust extraction, welding fume extraction, self-cleaning, pneumatic, vacuum cartridge filter for plasma, laser, sandblasting, soda blasting, shot blasting and all types of dry dust. Filter cleaned with compressed air pulses during operation, which ensures high efficiency of the device. Fan on the clean side, which reduces the risk of explosion to a minimum. Hnodpfx Aijvzy Irjkjk Parameters: Efficiency - 12000 m3/h Filtration area 252 m2 Cartridge filter inserts - 12 pcs. 15 kW engine inlet diameter - 500 mm Dimensions: height - 3.65 m width - 2.10 m depth - 2.10 m fan: 1.75 m x 1.50 m height 1.45 m stock no.: 0948

Condition: good (used), filter area: 180 m², suction capacity: 9,000 m³/h, Dust extraction, welding fume extraction, filtering, self-cleaning filter, pneumatic, vacuum dust collector, absorber for plasma, laser, sandblasting and all kinds of dry dust. PLYMOVENT MDB / AZUR Cartridge filter cartridges cleaned pneumatically with pulses of compressed air during operation, resulting in high efficiency of the device. The fan is located behind the filter on the clean side, which reduces the risk of explosion to a minimum. inlet diameter - 400 mm The fan has a power of 7.5 Kw. Capacity up to 9000 m3/h Filtration area of 180 m2 Dimensions: height - 3.10m width - 2.80m depth - 1.25m fan: 1.00m x 1.00m Hnedpfx Aisu A Thlekek

Condition: used, Year of construction: 1994, filter area: 250 m², suction capacity: 7,500 m³/h, Dust extraction, welding fume extraction, filter ventilation, self-cleaning filter, pneumatic, vacuum dust extractor, plasma, laser, sandblasting and all types of dry dust absorber. Donaldson Torit model: 3DF12 cyclopeel - with pre-separator Cartridge filter inserts cleaned pneumatically with compressed air pulses during operation, which ensures high efficiency of the device. The fan is placed behind the filter on the clean side, which reduces the risk of explosion to a minimum. Cartridge filter inserts. Fan with a power of 5.5 Kw Max efficiency 7500 m3/h Filtration surface 250 m2 12 filter inserts inlet diameter - 315 mm Hnsdpfx Aijwgknxokjk Dimensions: filter unit: width - 2.15 m x 2.25 m height - 3.15 m control cabinet: length - 1.20m width - 0.80m height - 0.40m fan: length - 1.20m width - 0.80 m height - 1.20m stock no.: 0988

Condition: good (used), Year of construction: 2017, suction capacity: 16,600 m³/h, negative pressure: 5,600 Pa, Dust extraction, welding fume extraction, patron filter self-cleaning, pneumatic, vacuum for plasma, laser, sandblasting, soda blasting, shot blasting and all kinds of dry dust. The filter is cleaned pneumatically by pulses of compressed air during operation, which makes the device highly efficient. Fan on the clean side which reduces the risk of explosion to a minimum. Brand: Donaldson Torit DCE Model: DFO4-24 Year of production - 2017 Cartridge filter cartridges, oval - DFO ULTRA-WEB FR - 24 pieces Filtration area of 430 m2 45 Kw fan. Fan model : ART 631 N4T Built-in frequency converter and RITTAL SK 3305540 control cabinet air conditioner. Capacity 16600 m3/h Inlet diameter - 1 x 350mm , 2 x 300 mm Dust emptying cell sluice. Comes with a silencer and technical and electrical documentation. Hnsdpottah Ujfx Aikek Also on offer on request new filter cartridges tailored according to the purpose of the device.

Year of construction: 2019, condition: good (used), Dust extraction,welding fume extractor,cartridge filter self-cleaning,pneumatic,vacuum for plasma,laser,sandblasting,sodding,blasting and all kinds of dry dust. Brand: TEKA / Bystronic Model: Filtercube 4H / FilterBys Version 2 Year of manufacture: 2019 Filter cleaned by microprocessor controller with compressed air pulses during operation thus high efficiency of the device. Low compressed air demand thanks to the system "Power-Spray" The Filtercube central filter unit equipped with cartridge filters is the ideal solution for almost all problems in the area of smoke and dust filtration. Fan on the clean side which reduces the risk of explosion to a minimum. Hedpfx Aionyhvqekjnk Application: central extraction system for multiple welding stations extraction system for welding robots extraction system for thermal cutting and grinding tables system for general hall filtering (push-pull system, displacement system) extraction system in combination with an extraction table extraction system for grinding of non-exploitable materials Parameters: 5.5 Kw fan Capacity 3800 m3/h Vacuum pressure 3250 Pa Inlet diameter : 250 mm Filtration area of 100 m2 Equipped with "DUST-VAC" unit , which automatically pumps the dust into a separate tank. Possibility to order new filter cartridges tailored to the customer's needs Technical documentation included.

Condition: used, Year of construction: 1999, suction capacity: 5,600 m³/h, negative pressure: 3,000 Pa, Dust extraction, welding fume extraction, self-cleaning filter, pneumatic, vacuum dust extractor, plasma, laser, sandblasting and all types of dry dust. Filter cleaned pneumatically with compressed air pulses during operation, which results in high efficiency of the device. Sinbran filter cartridges. SINBRAN filter cartridges are environmentally friendly and therefore suitable for use in the pharmaceutical and food industries. They are suitable for separating aerosols of organic materials, such as those created during laser cutting operations. SINBRAN filter cartridges combine the advantages of membrane filters with the advantages of rigid body filters: Large filter surface requiring minimal space. High mechanical load capacity, very long life cycle, low pressure drop and high filtration efficiency is a new approach to dust removal that achieves impressive filtration results, even in particularly difficult applications. High mechanical stability of the filter material ensures long service life. Compared to conventional rigid filters it causes minimal pressure loss. Short compressed air pulses during the filtration process ensure effective filter cleaning. Hnodpfx Asvxtkzjikek 7.5 Kw fan Efficiency 5600 m3/h Sinbran filter inserts 12 pcs. Negative pressure 3000 Pa

Condition: used, Year of construction: 1990, Motor power: 1 kW Filter area: 2500 mm x 1600 mm Hjdpswv Nbcjfx Aiksnk Exhaust connection: 300 mm Power consumption: 2.3 A Weight: approx. 120 kg

Condition: new, In addition to pigments and additives, wet paints also contain other harmful substances that must be extracted without fail. AL‑KO COLOUR JET extraction units are the ideal solution here, offering four performance levels to ensure sufficient capacity at all times. The devices in the COLOUR JET series are optimally designed for the extraction of paint mist and solvents at wet painting workstations. The front guide plate ensures collection of emissions from below and at the side inlets, as solvents from paints settle and accumulate near the floor. At the same time, the guide plate ensures uniform air distribution across the filter and protects the filter medium from direct impact. Paint pigments are separated out via the large-area exchangeable filter, and the cleaned exhaust air is then routed outdoors via a pipe or hose. Applications: - Wet painting workstations in trade, industry, and workshops - Painting stations with ATEX Zone 2 Hnedpfowv T R Uox Aikjk Advantages: - Clean and safe painting workstations thanks to high extraction performance and an effective filtration system - Flexible use due to mobile design - Cost-effective and powerful, in many cases a substitute for a closed spray booth - Safety via certification for use in potentially explosive atmospheres (ATEX Zone 2) - Individually adaptable with a wide range of accessories

Condition: new, The powerful, mobile welding fume extractors AL-KO CLEAN UNIT F are the ideal solution for extracting welding fumes during manual welding, at automated welding stations, or with welding robots. Hedswwkvqepfx Aikjnk Function: The welding fumes generated at the welding site are captured via extraction arms and hoods, among other means, and conveyed through a duct to the inlet of the AL-KO CLEAN UNIT F. In a large pre-separation chamber, coarse particles are first separated out. The subsequently arranged filter cartridges of dust class “M” filter out the remaining fine dust particles. During extraction operation, the differential pressure-controlled filter cleaning system removes adhering particles from the filter cartridges. Venturi nozzles on the filter cartridges maximize the cleaning efficiency, ensuring consistently high suction power and a long filter service life. A volumetric flow monitor continuously controls the required suction capacity and issues a warning if the nominal value is undercut. The collected dust is gathered in an easily mobile container. The cleaned air is recirculated into the room via the top of the unit. Applications: - For all welding applications with unalloyed or low-alloyed steel - Usable as extraction at individual welding stations and at duct systems with several extraction points - Extraction at fixed-position hoods and welding tables Advantages: - Consistently high suction power thanks to an efficient fan and long-life cleanable filters - Extremely quiet due to high-performance sound insulation - Suitable for individual welding stations and for connection to duct systems - IE3 motors for high energy efficiency - Wide performance range - Optional accessories for various welding applications

Condition: excellent (used), Welding fume extraction Make: Kemper Model: Vacu Fil 500 Year of manufacture: 2/2016 Airflow: 500 m3/h Supply voltage: 400 Volt 12.9 amperes 5.5 kW Accessories: unused spare filter cartridge Transport dimensions: Length: 1200 mm Hsdpfx Aoxk Uxaeikenk Width: 660 mm Height: 1400 mm Weight: 250 kg

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 18133-00 12632868, input voltage: 400 V, Nederman ventilation unit for extraction of paint dust, oil mist, and contaminated air Hedpfx Aisw Hw Dgokjnk

Condition: good (used), functionality: fully functional, overall weight: 85 kg, SUCTION UNIT PLYMOVENT EMK 1602-H Manufacturer: PLYMOVENT Hsdpfxet Dkyts Aikenk Designation: EMK 1602-H Weight: approx. 85 kg Very good condition (see photos) Large castor wheels, 2 of which can be locked (simply operate with foot) Dimensions: Height 107 cm width 90 cm Depth 1100 cm Offer consists of 1 piece EMK1602-H General information: We are offering items here from various company liquidations, which we describe as well as possible and provide informative photos. Further information about the item cannot be provided. We offer the opportunity to view items on Tuesdays and Thursdays between 9 am and 4 pm by telephone appointment. If required, the item can be taken away immediately. Unless expressly described, this offer is for second-hand goods. Items have been visually inspected and are in good condition. Please note the photos Functionality performed - result ok. All offers ex stock 47441 Moers. If you require shipping, please contact us to discuss packaging and shipping costs. all dimensions are approximate Photos similar