Used Teka Airtracker Basic for sale (1,895)

Condition: ready for operation (used), Year of construction: 2004, A tool presetting device is offered. Axes: 2 (X/Z), position display: EPA 3001 2-axis LED display, tool holder: SK steep taper, projection measuring head with sighting device, pneumatic tool clamping, integrated compressed air maintenance unit including pressure gauge, fine adjustment via handwheels, zero point storage, measured value hold function. Weight: approx. 95kg, overall dimensions X/Y/Z: approx. 600mm/550mm/1100mm. Inspection possible by arrangement. Ibjdpfx Aoy Tatwjp Hob

Year of construction: 2015, condition: ready for operation (used), Three Rehm reflow soldering ovens for the printed circuit board industry are available. 1) 2x Rehm VXC basic 2450 Type 523, year of manufacture: 2015, power: 45kW, exhaust air: 1000m³/h, preheating zones: 5, peak zones: 2, cooling zones: 3, total process zone length: 2100mm, throughput capacity: approx. 100printed circuit boards/h, length: approx. 5000mm. 2) Rehm VXC basic 2100 Type 422, year of manufacture: 2014, power: 40kW, exhaust air: 1000m³/h, preheating zones: 4, peak zones: 2, cooling zones: 2, total process zone length: 2450mm, throughput capacity: approx. 115printed circuit boards/h, length: approx. 4300mm. The systems were thoroughly cleaned and serviced in December 2025. Documentation available. An on-site inspection is possible. Expected to be available from August 2026. Ibsdpfx Apszghf Ej Heb

Year of construction: 2014, condition: ready for operation (used), A T-S-I mixing and dosing system for adhesives is available. System type: two-component gear pump dosing system, material type: 2K silicone, swivel arm length: 1200mm, hose length: 2500mm, machine dimensions X/Y/Z: approx. 1500mm/1000mm/1800mm, weight: approx. 650kg. Documentation available. On-site inspection is possible. Ibsdpfxjwfg E Ds Ap Hob

Condition: new, functionality: fully functional, empty load weight: 114 kg, maximum load weight: 636 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,010 mm, loading space width: 1,060 mm, loading space height: 300 mm, total length: 2,910 mm, total width: 1,490 mm, total height: 800 mm, maximum speed: 100 km/h, trailer brake: trailer unbraked, Year of construction: 2026, Martz Basic 200 NEW VEHICLE Internal dimensions: 200cm x 106cm Total weight: 750 kg Payload: 636 kg Side board height: 30cm Unbraked single-axle flatbed trailer Side boards made of galvanized sheet steel Rear side board can be folded down and removed Bolted and galvanized steel frame Screen-printed plywood floor 13-pin electrical system Rear lights with reversing light and triangular reflectors Plastic mudguards Support wheel 13-inch M+S tires Vehicle can be stored on the rear panel Optional accessories: - 100 km/h upgrade - Rear supports - Mesh superstructure - Extension side boards 40cm - Aluminum cover with bracket for, e.g., bicycle carrier - Flat cover with or without frame - High cover 80cm or 110cm - Coarse or fine mesh net - Spare wheel with bracket - Ramps Further accessories available on request! Pictures are for illustrative purposes only and may show accessories that incur an additional charge. Plus vehicle registration document and freight to Gera: €100 net. Ijdpfx Aszk Hwnep Hsbb Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and available for immediate pickup. The workshop is open on weekdays from 8:00 a.m. to 5:00 p.m. for all kinds of repairs. Specialist in axle repair, including for caravans. Large selection of rental trailers. In addition, we have a large selection of spare parts and accessories for trailers from all manufacturers. Get advice by phone, visit our website, or come directly to our location.

Condition: new, functionality: fully functional, empty load weight: 106 kg, maximum load weight: 644 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 1,470 mm, loading space width: 1,060 mm, loading space height: 300 mm, total length: 2,360 mm, total width: 1,490 mm, total height: 800 mm, maximum speed: 100 km/h, trailer brake: trailer unbraked, Year of construction: 2026, Martz Basic 150 Tipper NEW VEHICLE Internal dimensions: 147cm x 106cm Total weight: 750 Kg Payload: 644 Kg Side panel height: 30cm Unbraked, single-axle, low-loader trailer Side panels made of galvanized sheet steel Rear side panel can be folded down and removed Easy conversion Bolted and galvanized steel frame Drawbar can be folded down Screen-printed wood floor 13-pole electrical system Rear lamps with reversing light and triangular reflectors Plastic mudguards Support wheel 13-inch M+S tires Vehicle can be placed on the rear panel for storage Optional accessories: - 100 km/h upgrade - Rear supports - Mesh superstructure - Extension side panels 40cm - Aluminum cover with bracket for e.g. bicycle carrier - Flat cover with or without frame - High cover 80cm - Coarse or fine mesh net - Spare wheel with bracket Ibedpezk Hb Hefx Ap Hob - Ramps Further accessories available upon request! Pictures are for illustrative purposes and may show optional accessories that incur additional costs. Plus vehicle registration document and freight to Gera 100 € net. Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and ready for immediate pick-up. The workshop is open on weekdays from 8:00 a.m. to 5:00 p.m. for all kinds of repairs. Specialist in axle repairs, also for caravan trailers. Large selection of rental trailers. In addition, we have a large selection of spare parts and accessories for trailers of all manufacturers. Get advice by phone, visit our website or come directly to us.

Condition: new, functionality: fully functional, empty load weight: 126 kg, maximum load weight: 624 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,300 mm, loading space width: 1,260 mm, loading space height: 300 mm, total length: 3,210 mm, total width: 1,690 mm, total height: 800 mm, maximum speed: 100 km/h, trailer brake: trailer unbraked, Year of construction: 2026, Martz Basic 230 NEW VEHICLE Iodezk E Rmepfx Ap Hobb Internal dimensions: 230cm x 126cm Total weight: 750 kg Payload: 624 kg Side board height: 30cm Unbraked single-axle low-loader Side boards made of galvanized sheet steel Rear side board can be folded down and removed Bolted and galvanized steel frame Screen-printed plywood floor 13-pole electrical system Rear lights with reversing light and triangular reflector Plastic mudguards Support wheel 13-inch M+S tires Vehicle can be placed on the rear panel for storage Optional accessories: - 100 km/h upgrade - Rear supports - Grid structure - Extension side boards 40cm - Aluminum cover with bracket for e.g. bicycle carrier - Flat cover with or without bow - High cover 80cm or 110cm - Mesh, coarse or fine - Spare wheel with bracket - Loading ramps Further accessories on request! Pictures are for illustrative purposes only and may show optional accessories that are subject to an additional charge. Plus registration certificate and freight to Gera 120 € net. Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and available for immediate pick-up. The workshop is open on weekdays from 8:00 AM to 5:00 PM for all kinds of repairs. Specialist in axle repair, also for caravans. Large selection of rental trailers. In addition, we have a large selection of spare parts and accessories for trailers of all manufacturers. Get advice by phone, visit our website or come directly to our location.

Condition: excellent (used), Year of construction: 2013, operating hours: 32,269 h, functionality: fully functional, machine/vehicle number: 2067-2091, WALTER Helitronic Basic 2013 For sale is Walter Helitronic Basic CNC tool and cutter grinding machine. It is in excellent working condition. Machine can be inspected by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. TECHNICAL CHARACTERISTICS Ibodewu Nw Uepfx Ap Hsb WALTER Helitronic Basic 2013 No. 2067-2091 Working hours 32269 [h] CNC control FANUC 310i Software: Tool Studio Version 3.5 Number of axes 5 Travel path: X= 470mm Y=330mm Z=640mm Spindle rotation speed: 10500 rpm Traversing feeds X, Y and Z axes 15000 [mmmin] A axis 360 [°] C axis +- 200 [°] Max. workpiece lenght peripheral grinding 350 [mm] Max. workpiece lenght end face grinding 280 [mm] Max. grinding diameter 320 [mm] Max. grinding diameter with automated work table 290 [mm] Grinding spindle attachment NCT Grinding spindle diameter 70 [mm] Max. diameter grinding wheel 150 [mm] Max. part weight in part holder headstock 20 [Kg] Coolant pump pressure 7 [bars] Collant pump flow rate 80 [lmin] Lubrication tank capacity 350 [l] Supply voltage 400 [V] Grinding spindle motor power: 7 kW Tool holder: ISO 50 Weight: 4500kg EQUIPMENT INCLUDED x1 Software TOOL STUDIO 3.5 x1 RENISHAW tool probe x1 DSL AIR TECHNOLOGY AES-SIGMA 20 type oil mist extractor x1 lubrication tank x1 paper band filtration unit x1 GRUNDFOS coolant pump x1 machine parameter backup x3 technical manuals (paper format) x1 technical documentation (CD-ROM format)

Condition: good (used), functionality: fully functional, The Wittmann temperature control unit is for sale: Medium: Water Heating capacity: 9 kW Cooling capacity: 30 kW Isdpfx Aeztwt Ejp Hsbb Mobile

Condition: good (used), Code: 0382 Brand: ALBERTI Model: BASIC PLUS CN - CE Standard CNC working centre for furniture and fittings – CE Standard Top vertical “point-to-point” drilling machine with continuous feed, with panel loading and longitudinal movement, with a monolithic structure made of electro-welded steel. Independent control of 3 axis with optimised drilling and insertion cycles Panel dimensions: Max 3000 x 1200 x 60 mm Min 300 x 110 x 15 mm (automatic loading/unloading) Min 300 x 110 x 8 mm (manual loading/unloading) Monoblock configuration with independent spindles: N° 16 independent vertical spindles with centre-to-centre distance 32 mm , along the Y-axis (Assembly) N° 3 horizontal drilling heads, with dual output in X direction pitch 32 mm and vertical presser, mounted on the side of the monoblock N° 10 independent vertical spindles with centre-to-centre 32 mm arranged along the X axis (Fitting) N° 1 horizontal drilling head with dual output in Y direction and vertical presser Workbench configuration: Loading roller section with straight PVC-coated rollers Useful length for panel support 2000 mm Useful width for panel support 840 mm Reference surface inside the machine body, consisting of ground PVC-coated idler rollers, with a usable width for panel support 1000 mm Work surface height 920 mm, adjustable +/- 30 mm Discharge roller section with straight PVC-coated rollers Useful length for panel support 2000 mm Useful width for panel support 840 mm Ibsdpfxey R U Abe Ap Hob Panel guide bar with automatic positioning movement Vertical clamps mounted on the panel guide bar, automatically adjusted to the workpiece thickness via pneumatic cylinders Vacuum pump 40 m³ Milling unit“Electric spindle” 9 Hp Tool holder HSK-63F for AUTOMATIC/MANUAL tool change system. Speed selectable via program (12.000/18.000 rpm) - Device capable of performing milling operations in X and Y directions, both linear and interpolated, within the machine’s technical limits. Rotation in both Right and Left directions. Tool Ø max 40 mm – N°1 HSK-63F right included Automatic tool changer Equipped with 4 positions for the automatic retrieval of tools with max diameter 40 mm. Includes a set of 4 shanks for taper ISO 30 . Compatible with milling unit – N° taper HSK-63 included Circular blade unit: Composed by independent motor 1,8 Hp, speed 12.000 rpm, capable of cutting grooves in X and Y directions within the machine’s technical limits. Tool mounting with flange, max bore Ø 120 mm, max thickness 8 mm Control panel and numerical control unit Mod. ALBNT (TPA): operating system Windows XP - ALBATROS TPA software Installed power 12 Kw Compressed air 6/7 bar Extraction: speed 30 m/s - Flow rate 8686 m³/h Overall dimensions: see attached sheet Weight kg 3500

Condition: used, “functionally tested; item originates from the dismantling of equipment at an automotive supplier” Quantity available: 5 Manufacturer: Siemens Type: 6SL3000-0BE23-6DA1 Series: SINAMICS S120 Category: Basic Line Filter Application: Reduction of conducted disturbances (EMC), compliance with grid feedback limit values according to EN standards Rated current: 23 A Voltage: 400 V AC Frequency range: 50/60 Hz Iodpfx Apozm Ik Ue Hebb

Year of construction: 2019, condition: good (used), machine/vehicle number: 157, Offer 22273 Technical data: Isdpfx Apjiv Hz Dj Hsbb - Stroke: 30 mm - Air consumption per stroke: 5 l - Pneumatic connection: 8 bar - Space requirement: approx. W 500 x H 550 x D 500 mm - Weight: approx. 70 kg - Includes: - Foot switch - Mobile machine base: W 600 x H 830 mm - Various tools by HUECK

Condition: good (used), Year of construction: 2012, Lightly used mixing, dispensing, and adhesive application system with a gear pump in good condition: t-s-i mastermix gear basic – Mixing and dispensing system for 2-component silicone adhesives Isdezq S Ifopfx Ap Hobb – Two-component gear pump dispensing system – Hose set, 2.5 m, 2-component dispensing gun – Siemens S7-200 control system – Overpressure/underpressure cut-off – Pot life monitoring with acoustic warning – 200-liter component A container – 20-liter component B container – Swivel arm extension 800 mm – Swivel arm height increase 300 mm – Hose set extension 1000 mm – Automatic dispensing when in the "parking" position – Year of manufacture 2012, rebuilt by T-S-I in 2016/17 – System was lightly used – Sale from location Karlsruhe / Southern Germany – Inspection possible by arrangement

Condition: excellent (used), MEMBRANE PRESS For overlaying MDF shaped workpieces with PVC, PP and PET With VARIOPIN system Double Automatic front loading/unloading and preparation table (1500 x 2800 mm tray) Max pressure 2,400 KN Working pressure 320 BAR Dimensions of the Platens tables mm 1500 x 2800 Useful working dimensions mm 1250 (or 2 x 600) x 2550 Front loading side from mm 1500 (useful width mm 1250) Ijdpjrwxz Rjfx Ap Hebb Separate electrical cabinet and controls ( Electronic Programmer SIEMENS SIMATIC Panel Touch Total Installed power KW 50 ca. OPTION: "Paternoster" reels Store (magazine) Unwinder (reels holder) with coating sheet cutting system

Condition: new, Year of construction: 2026, Efficient and precise CNC CORMAK C1325 BSP milling plotter, equipped with SERVO drives as standard, has a structure made of steel and cast iron, which ensures adequate rigidity and resistance to overloads arising during operation. It is designed for processing and cutting wooden materials, chipboards, MDF, OSB, plywood, PVC, plexiglass and dibond. For each machine, training is included in the price at our headquarters! Construction Welded steel rigid structure, The arms of the gate are made of hardened, thick, powder-coated sheet metal, which has increased stiffness, which translates into the quality of the processed detail. Workbench The work table was made in hybrid technology, It has T-slots for manual clamping material with dimensions of 1300 x 2500mm, Drive Engines used to drive high-power machine tools provide appropriate acceleration and speed in individual directions. The X and Y axes feature high-quality HIWIN toothed racks praised by users, which ensure high durability and precision, All axes move on rail guides. Machine equipped with tool height sensor Linear bearing: trapezoidal rails Spindle Ijdpfxjiz A Eze Ap Hobb High quality spindle that is durable. Additionally equipped with an air cooling system The construction of the spindle uses high-quality sealed bearings, characterized by very quiet operation and guaranteeing increased durability. Tool height measurement sensor - included. Spindle speed range is 4,500 to 18,000 rpm. Tool clamping with 3 pcs ER32 collets, diameters 1/8", 1/2" and 5-6mm Software The machine is equipped with ARTCAM PRO software as standard Optional available: UCANCAM V11 CAD/CAM CNC software in Polish version The software enables quick and easy design of elements, which the program then converts into the so-called. G-code. It is also possible to import ready-made files from other programs. DSP control Digital Signal ProcessingDigital Signal Processing The DSP controller of the machine has its own processor and operating memory, which ensures trouble-free operation and simple operation of the machine. The driver ensures smooth operation of the device and accuracy in machining. There is no need to reinitialize the program after a power loss. The memory built into the controller allows the machine to work without having to load the program each time. Technical parameters Spindle 5.5kW / 18000rpm. inverter, air-cooled Workspace 1300x2500mm Maximum spindle height 350mm Control DSP Software resolution 0.001mm Software complete Power 400V Weight 980 kg Machine dimensions 2100x3100x2200mm Table height 715mm Guides linear Transfer toothed rack ATTENTION! The machine is equipped with the function of remembering the last track of the G-code. In the event of a power failure or interruption, it restarts from the last point without losing time or material. The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. Check our offer on our website.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 400 V, For sale: a Hammer K3-Basic panel saw. This machine has been used in our showroom as a demonstration model. Therefore, it can be described as being in new condition and comes with a full warranty. Technical specifications: - Tilting circular saw 90-45° - Sliding table 800 mm - Miter fence 900 mm - Cutting width 700 mm - 3 kW (4 hp) motor / 400 volts Ijdpfozn I D Dsx Ap Hjbb The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! For information, call: 03137-3109 Related terms: circular saw, saw, table saw Reference: R-D1618

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, total width: 1,800 mm, total length: 3,500 mm, total height: 2,500 mm, High-quality degreasing and cleaning system based on PER This system is a high-quality and high-performance degreasing and cleaning system based on perchloroethylene (PER) with a standard basket size. Thanks to two pre-treatment tanks, integrated ultrasonic cleaning, and vacuum drying, the system enables safe, thorough, and fast degreasing of a wide variety of metal workpieces. The complete stainless steel piping and high-quality system components ensure high operational reliability and a long service life. The system has been professionally overhauled and is ready for immediate use. An inspection of the system while it is running is possible at any time in 75447 Sternenfels after prior arrangement. We are always available to provide further information or answer any questions you may have. We look forward to your inquiry! System equipment: - Workpiece handling - Spray system - 2 x hot flushing systems - Ultrasonic cleaning with 1.0 kW / 25 kHz - Process filter 100 μm - Fine filter 5 μm - Vacuum drying - Vacuum distillation - Adsorption unit Ibsdpozmxlpofx Ap Hob Technical data: Solvents that can be used: Perchloroethylene PER Filling volumes: 600 dm³ Operating mode: 2-shift Connected load: 40 kW Compressed air: 6 bar System weight: 3000 kg Throughput: Up to 5 batches/h (150 kg/h) Basket dimensions: 480 x 320 x 300 mm

Condition: new, Year of construction: 2022, Belt width: 150 mm Belt length: 3000 mm Table size: 960 mm x 352 mm Extension table: 330 mm x 330 mm Veneer sanding attachment: yes Oscillation: yes Sanding unit swivels: yes Dust extraction port: 120 mm Motor power: 3 kW Machine length: 1900 mm Machine width: 810 mm Weight: 290 kg Ijdpfegr Ufhox Ap Hebb

Condition: new, Year of construction: 2026, Working width: 300 mm Working height: 210 mm Minimum workpiece length: 300 mm Units: 2 brush units, centrally adjustable 1st brush: Tynex brush, grit 60, diameter 180 mm 2nd brush: Tynex brush, grit 80, diameter 180 mm Height adjustment: handwheel Height indication: mechanical counter Feed rate: 4 - 12 m/min Brush motor power: 2 x 3 kW Ibsdpfx Ajd Ry Duop Hob Feed motor power: 0.37 kW Machine length: 1150 mm Machine width: 800 mm Weight: 390

Condition: good (used), Year of construction: 2011, PLC controller, connection module for digital electronic modules, terminal module -Manufacturer: Fanuc, Terminal I/O Basic Dual Module -Type: A03B-0823-C001 A03B-0823-C003 Ibsdowt Rw Hjpfx Ap Hob -Price/Sale: complete -Dimensions each: 140/130/H150 mm -Weight: 0.9 kg

Condition: good (used), Interface converter, converter module, FL Comserver -Manufacturer: Phoenix Contact, FL Comserver -Type: Basic 232/422/485 Ord.-No. 23 13 478 -Price: per piece Ibodpfx Apof Rumls Hob -Quantity: 3 available -Dimensions: 100/20/H110 mm -Weight: 0.1 kg/pc.

Condition: good (used), Contactor, semiconductor contactor, contactor, power contactor -Square D basic module: PD 3.01 E -Class: 8502 -Price: per piece -Quantity: 17 pieces -Dimensions: 88/49/H75 mm Ibjdpfx Apjd Spi Rs Hsb -Weight: 0.4 kg/piece

Condition: used, Basic - feed-in unit, feed-in module, converter, frequency converter, frequency converter, drive converter, controller, variable speed drive -Manufacturer: Baumüller, basic feed-in unit -Type: BUG622-28-54-E-000 -Number: 4x module available -Price: per piece -Dimensions: 300/100/H380 mm -Weight: 14 kg/piece Iodpfsb N E Hasx Ap Hebb

Condition: good (used), Line chokes, line filters, frequency converters, drive inverters, line filters, Smart Line Modules, Basic Line Filters -Manufacturer: Siemens, Line choke Line Filter Sinamics for 36kW -Type: 36KW SLM/ALM / 40 KW BLM -Voltage: 3AC 380-480V, 50-60Hz, 74A -Number: 4x Line Filter available -Price: per piece Ibjdpfxsxm Sdfe Ap Hob -Dimensions: 415/75/H225 mm -Weight: 7 kg/piece

Condition: excellent (used), Contactor, semiconductor contactor, contactor, power contactor -Square D basic module: PD 2.01 E -Class: 8502 -Price: per piece Ibsdpfxsd Spi Ie Ap Hsb -Quantity: 17 pieces -Dimensions: 88/49/H75 mm -Weight: 0.3 kg/piece

Condition: excellent (used), Here we offer you a used eurokraft computer cabinet. Product description: Sturdy, powder-coated steel sheet construction. Overall dimensions: Height x Width x Depth 1638 x 600 x 350 mm. Iedjzgcbbjpfx Ap Hobb Enclosure for flat-screen monitor, lockable. Acrylic glass panel, HxW 420 x 450 mm. Internal dimensions HxWxD 548 x 598 x 330 mm. PC cabinet with side door, lockable. Internal dimensions HxWxD 480 x 570 x 348 mm. Panel, Width x Depth 900 x 600 mm, thickness 25 mm, melamine resin-coated. Technical data: Overall height 1638 mm Overall width 600 mm Overall depth 350 mm Internal dimensions, monitor compartment HxWxD 548 x 598 x 330 mm Max. screen size (TFT) 20 inches Body material: steel sheet, powder-coated Ventilation: passively ventilated (wall slots) Protection class: IP20 Feature: lockable Design: with work table Monitor compartment with Work surface dimensions 25 x 900 x 600 mm Weight: 44 kg Product type: computer cabinets Body color: blue-grey RAL 7031 Type: eurokraft basic computer cabinet Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have by telephone.