Used Steel Letter Punches for sale (19,719)

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2010, operating hours: 990 h, machine/vehicle number: 198871007, mast type: telescopic, lifting height: 18,000 mm, overall weight: 2,700 kg, empty load weight: 2,700 kg, transport length: 5,200 mm, transport width: 1,400 mm, transport height: 2,000 mm, construction height: 2,000 mm, next inspection (TÜV): 01/2025, fuel type: hybrid, fuel tank capacity: 9 l, tire condition: 85 %, color: white, maximum load weight: 200 kg, Self-propelled crawler telescopic work platform with 18m working height and 8.5m lateral reach with 200kg basket load!!! Godpfxovmbzwj Akyebu in very good condition, overhauled in workshop, white non-marking crawlers radio remote control, petrol and electric operation, hydraulic track widening and narrowing possible via remote control, clearance height is less than 2 meters despite 18m working height very simple design, therefore very easy to service, Honda petrol engine with speed control via remote control (quieter operation possible) All functions that are possible with the petrol engine work just as well as electrically Power and air in the basket Electronics/control units on the platform replaced, hydraulic hoses replaced, new ball bearings for electric motor, new rubber buffers, return filter, engine oil, fuel filter, air filter, paint on the platform is in good condition, no rust. the basket and the jib arm (the one in front of the basket) are rotatable (both functions are rotatable - special equipment!) the platform has a total of 3 rotation options (tower, jib arm and the basket) and each can be rotated separately! The crawler platform can be rented and purchased. new TÜV can be organized, TIMA transport trailer (with new inspection, new brakes) is also available to buy optionally for 8,000 net we can also organize transport of the platform worldwide!

Condition: used, tank capacity: 50,000 l, total width: 3,600 mm, total height: 8,700 mm, Insulated 50m³ stainless steel tank with heating jacket and agitator Gjdpfxszwm Nke Akysbu Diameter: 3.60m Height: 7.20m + 1.50m agitator = total height 8.70m The tank is insulated and lined with steel sheet. The heating strip is located in the lower half of the tank. The tank has a flat bottom. Gear motor power: 10 kW/15 kW. Mixing speed: approx. 20 rpm.

Condition: used, Technical details: Gbodpowp Edajfx Akyou throat: 250 mm number of strokes: 42 Hub/min sheet thickness - max.: 13 mm round bar steel: 36 mm square edge steel: 30 mm angle steel: 100 x 10 bei 90° mm flat steel: 100 x 18 mm U-H profile: NP 10 knife length: 230 mm total power requirement: 2,5 kW weight of the machine ca.: 1,7 t dimension machine xH: 2,1 x 1,0 x 1,6 m Application: Shearing - notching - punching Notching: material thickness = angle 50 x 8mm and rectangle 50 x 50 x 8mm Punching: max. 20 : 15mm, throat 250mm Foot control no longer available on both sides! Accessories various dies and various punches and small punches (see photo) *

Condition: good (used), Year of construction: 2002, functionality: fully functional, Boschert TRI 1500 CNC Z Rota Revo Tool quick-change system TRUMPF Punching force: 3 x 280 kN (28 tons) Station 1 Trumpf system tool - size 3 (105 mm) with spray device Gbsdpfxsz R Da Ss Akysu Station 2 Trumpf system tool - size 3 (105 mm) freely rotatable and indexable Station 3 Trumpf system tool/Boschert Revotool - size 3 (105 mm) Station 4 Engraving head incl. Revotool 8-position tool holder Travel distances x- 3000 mm (repositioning up to 9999 mm) y- 1580 mm Punch arm outreach: 1730 mm Tool system Trumpf size 1-3 (105 mm) Labod 32050 graphic control / workshop programmable Max. sheet thickness: 6 mm (clamp opening) Max. stroke height: 90/45 mm, continuously programmable upwards and downwards. Punching scrap extraction Ball rollers in the machine table Table width left + right: 3200 mm each Table depth: 2810 mm Table height: 900 mm Overall width: 6482 mm Overall depth: 4600 mm Overall height: 2110 mm Drive power: 25 kVA Machine weight: 15,800 kg Hydraulic oil capacity: 160 l Color: Blue RAL 5017 / Light gray RAL 7035 Machine year of manufacture 2002 Well-maintained condition - currently being overhauled Available from mid-November 2026 with a large amount of accessories

Condition: excellent (used), Conveyor Food Grade 316 stainless steel Belt dimensions 1450mm x 700mm Overall dimensions 1450mm long x 900mm wide Gbsdpsyw Tdkefx Akyeu

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, operating hours: 3,000 h, machine/vehicle number: 200011402, load capacity: 200 kg, lifting height: 14,000 mm, lifting power: 200 kg/m, overall weight: 1,650 kg, empty load weight: 1,650 kg, transport width: 1,400 mm, transport height: 2,000 mm, construction height: 2,000 mm, next inspection (TÜV): 08/2026, fuel type: hybrid, fuel tank capacity: 5 l, tire condition: 50 %, color: white, maximum load weight: 200 kg, operation weight: 1,650 kg, Self-propelled, 14-meter tracked articulated boom lift for 200 kg and 120 kg loads, complete with electronic scale, available for sale! Year of manufacture 2012 for €21,800 net, year of manufacture 2014 with white tracks for €22,900 net. Only 78 cm passage width and 1.95 m passage height! Two-person platform with 1.4 m width, which can be detached from the boom with 2 bolts. Power and optical compressed air connection available in the platform and can be used. Operation is possible with gasoline or 230 V electricity (almost silent), allowing work to be carried out on weekends. All functions (driving, outriggers, lifting, etc.) can be operated with electricity or gasoline. Good condition, white, non-marking tracks, all services performed, switching unit for 120/200 kg is new! Fully functional and ready for use! (Current TÜV inspection has expired). If desired, a current TÜV inspection can be arranged. Godpfezrf Sasx Akyebu For further questions, please call or send an email.

Condition: excellent (used), Two-chamber stainless steel tank 66m3 (40 + 26 m3) DIMENSIONS: - Diameter: 3,245 mm - Height: 13,053 mm Year of manufacture 2006 Weight: 4,680 kg Upper part: 40° slope - Lower part: 2% slope. DN 600 hatch with hinged cover at the top. stainless steel pressure-vacuum valve At the bottom, a DN400 hatch with a hinged cover a stainless steel pressure-vacuum valve Upper tank heating: 6 coils, exchange surface 6.95 m2, PS 2 bar Above 2 coils, exchange surface 2.33 m2, PS 2 bar A device for moving grounds, test valve Lower tank heating: 4 coils, exchange surface 4.64 m2, PS 2 bar. Above: 2 coils, exchange surface 2.33 m2, PS 2 bar. Liquid level gauge 555x432 rectangular hatch Gbedpfx Aevlpctjkysu DN70 ball valve The tanks were used in the wine industry. The tanks have a technical drawing. The tanks are dismantled and ready for delivery.

Condition: good (used), functionality: fully functional, Year of construction: 2017, laser power: 3,000 W, X Working area max.: 2500 mm Y Working area max.: 1250 mm Control system: Basic Rexroth IndraMotion MTX Laser power: 3000 watts Standard equipment: Machine - Closed machine frame - Hybrid axis system - Linear magazine with 20 slots for clamping jaws and tools - Drives with maintenance-free three-phase motors - Follow-up device with programmable clamping beam - Foot pedal for clamping jaw closure - Beam protection - Dividing chute on the right - Part flap on the left - Sensor for part flap - Work area lighting - FocusLine - Protective tool TRUMPF Laser - Solid-state laser TruDisk 3001 with one laser beam cable (LBC) output - LBC according to standard layout (10 m) - Laser power control - Laser logbook function - Enclosed beam guidance via laser beam cable (LBC) The TruDisk laser is subject to international export control. According to EC Dual-Use Regulation 428/2009 (lasers covered under 6A005). Compact cutting unit - Solid-state laser compact cutting unit - Protective glass - Collision protection - ControlLine Punch head - Delta Drive - Rotatable mono-tool holder - Programmable clamping beam position - Tool length compensation - Spray lubrication for the punch - Scrap extraction - Forming function - Stroke counter for the punch Control system - TRUMPF control system based on Rexroth IndraMotion MTX - Touch panel with 19'' TFT color display - Integrated technology data - Programmable cutting gas pressure - Teleservice interface via Internet - Automatic shutdown including wake-up function - Program management - Production plan Data transfer - USB interface - RJ45 network connection Gsdpfx Aksz Rl Hysysbu - Central Link Safety - CE marking - Multi-beam light curtains - Protection against scattered radiation Extended laser equipment - Copper cutting package - Brass cutting package Extended punching equipment - MultiTool function - MultiBend function - Thread forming function with thread counter - Signing/fast beading function - Engraving function - Deburring and rolling technology function - Adaptive stroke calibration - Spray lubrication for the die and level monitoring - Smart Punch Monitoring Part removal - Integrated sorting function for dividing chute - Sensor for dividing chute - Container track for 4 standard containers - Containers supplied by the customer Special sheet metal processing - Brush tables - Loading and unloading aid for brush tables Options Compact dust collector - CO2 extinguishing system for the compact dust collector Data transfer - Wireless operation point SheetMaster Compact 2500x1250mm (AK05) - Suction frame - Unloading trolley for scrap grid and microjoint sheets - Loading station with spreader magnet for separating sheets - Double sheet detection - Vacuum sensor - 2nd operator station for loading and unloading - Compact installation (double-wing swing doors) - Peeling system

Condition: used, 150m³ (1500hl) Stainless Steel Tank Grade AISI304 Wall Thickness: 2.2mm Bottom Thickness: 3.3mm Gbjdpfjxcxitsx Akyju

Condition: good (used), Floor weighing scale K-PZ Weigher indicator Type: KPZ 52E-9-1 Maximum weight: 300 kg Gbedpfxox Hz Dqj Akyeu Minimum weight: 2 kg, e=: 0.1 kg, T=- 300 kg Dimensions: 800 mm x 1100 mm x 100 mm Including ramp

Condition: used, Tote Bin Lifter for stainless steel meat bins Lifting height: 2050 mm Gedpfxeym U Afs Akyebu Total dimensions: 1050 mm x 900 mm x 2940 mm

Condition: used, Log Infeed System Manufacturer: Jack Steel Year of manufacture: 2019 Hydraulic log infeed system Twin-chain feed conveyor Electric control system Godpfxezmf I Ro Akyebu Suitable for feeding logs to sawmill or sorting lines

Condition: used, total width: 1,900 mm, total height: 6,500 mm, diameter 1.90m height 6.5m Gbjdpezwm U Tefx Akyeu on legs and agitator

Year of construction: 1995, condition: used, A decoiling, straightening and stamping line with roller feed, straightening machine, decoiler and hydraulic press is available, 1) Roller feed WV-U-80/DSM 300 P-N, working direction: left to right, max. strip width: 300mm, strip thickness: 0.1-5mm, max. strip cross-section: 1,000mm², roller diameter: 80mm, max. feed speed: 120m/min, max. roller contact force: 4.5kN, feed accuracy: ±0.05mm, adjustable pneumatic pressure: approx. 5bar, 2) Straightening machine RSTC W60/7/300, working direction: left to right, passage width: 320mm, max. strip width: 300mm, strip thickness: 0.4-5mm, max. strip cross-section: 1,050mm², straightening and correction roller diameter: 60mm, feed roller diameter: 80mm, strip speed: 0-30m/min, feed rollers: 4, straightening rollers: 7, correction roller: 1, drive power: 3kW, 3) Decoiler E 3000/300 OMB, working direction: left to right, max. load capacity: 30kN, expansion range: 470-520mm, max. coil outer diameter: 1,500mm, strip width: 300mm, main shaft height above floor: 1,000mm, weight: 1.2t, 4) Hydraulic Single-Column Press Dunkes, pressing force: 125t, including documentation. On-site inspection is possible. Gsdpjz R A Rpefx Akysbu

Condition: good (used), total height: 7,500 mm, outer diameter: 2,750 mm, 32000l Insulated stainless steel tank Godpfx Aezvwlgokyjbu with a side-mount propeller agitator 8 kW power Diameter: 2.75 m Height: 7.5 m Slightly conical bottom It is placed on legs

Condition: used, 50 m³ stainless steel tank With a flat bottom 7 units available: 5 units with a diameter of 3.55 m and a height of 5.50 m or 5.40 m (quantities for each variant to be confirmed upon delivery). 1 unit with a diameter of 3.00 m and a height of 8.40 m. Godjz Hv Ifspfx Akyjbu 1 unit with a diameter of 3.00 m and a height of 7.10 m. NOTE! The tanks require a concrete pad or foundation (available from us at additional cost).

Condition: good (used), Marel Stainless Steel floor weighing scale Marel weigher indicator Gedpfx Ajx Il Ntskyobu M2200-P02 110-230 Vac, 0.24-0.12 A Dimensions scale: 900 mm x 900 mm.

Year of construction: 2015, operating hours: 6,000 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 1448380811, Set including: Centrifuge Hydraulic unit Gbedpfxoz Icw Aj Akysu 2 feed pumps 1 flocculant pump 1 flocculant preparation tank 1 electrical control panel

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, laser power: 4,000 W, X working area max.: 3050 mm Y working area max.: 1550 mm Control: Rexroth IndraMotion MTX Laser power: 4,000 watts Standard equipment: Machine - Sturdy, easily accessible C-frame - Coordinate guidance for high-precision machining - Linear tool changer with 21 tool stations and 4 clamps - Maintenance-free three-phase drive motors - Repositioning device with programmable hold-down - Foot switch for closing clamps - 2 good parts containers - Automatic shutoff Laser station - TruFlow laser - High-frequency excitation - Cooling unit - TASC 3 laser controller - Enclosed beam guidance - Beam tube ventilation with compressed air - Programmable cutting gas pressure - Laser cutting head with 170 mm focal length - Universal quick-change cutting head device UTI with bus connection - LensLine - FocusLine - ControlLine - NitroLine - SprintLine - ContourLine - FlyLine - PlasmaLine - High-speed cutting - Additional Xp and Yp axes - Ejector cylinder for laser parts - Fast flap for laser parts 500 x 500 mm - Liftable laser cutting support - Slag cone detection Gbsdpfx Aksz Rl E Nsyou - Laser logbook function Punching station - Electro-hydraulic punching head - Rotatable mono-tool holder - Tool length compensation - Programmable hold-down with adjustable force - Stroke counter for punches - Spray lubrication for punches - Punch slug extraction - Warp detection - Flap for punched parts 500 x 500 mm - Fill level monitoring in the punching console Control - Open control system based on Bosch Rexroth IntraMotion MTX - Operating panel with 15" TFT touchscreen - Program management and 80 GB storage capacity - Diagnostic function with laser logbook - Integrated technology data - Teleservice Data transfer - Network connection RJ45 and USB interface Safety - CE marking - Multi-beam light barriers - Monitoring system for, among others, gas pressure, temperature, cooling water - Hydraulic quick shut-off - Protection against stray radiation - Compact extraction unit - TruFlow 4000 - Vibration-dampened installation - Thread forming function - MultiTool function - Chip conveyor with tilting container - Active die - Ejector for small parts - Brush tables with loading aid - Marking function - Repositioning cylinder - Warp detection

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: A/B/C/D/E, Thick turret punch tool for Amada, Lvd, Finn-power, Euromac, Yawei, JFY Original style punch compatiable for Amada/Mate guide holder Quick adjustable style compatiable for Mate/Wilson 90 guide holder Standard shape as Round, rectangle, Square, Ob-long, triangle Special shape, emboss tool, countersink tool, lance & form tool, bridge tool, louvre tool, blank out tool, dimple tool, etc. Gbjdjiq Di Aepfx Akyou Our Thick Turret CNC punch tooling is engineered for high-volume sheet metal fabrication, fully compatible with mainstream thick turret punch press systems including Amada, Euromac and Mate standard stations. Manufactured from premium high-speed tool steel, each punch and die set undergoes strict CNC machining, vacuum heat treatment and precision surface grinding to deliver exceptional hardness, outstanding wear resistance and consistent punching accuracy. This complete thick turret tooling range covers A/B/C/D/E standard stations, including round, rectangular, special profile punches and various forming dies for embossing, louver, bridge and tapping operations. Optimized clearance design effectively reduces slug pulling, galling and burrs, minimising sheet scratches and scrap rates. The modular structure supports quick tool change and simple maintenance, cutting machine downtime and boosting your punching productivity. Whether processing mild steel, stainless steel, aluminium or galvanized sheet, our thick turret punch dies maintain stable performance under continuous heavy-duty operation. We also provide custom profile tooling according to customer drawings, a reliable all-in-one punching tooling solution for cabinet, electrical enclosure, automotive and HVAC metal fabricators.

Condition: good (used), tank capacity: 14,500 l, total width: 2,150 mm, total height: 6,200 mm, Equipment: cooling unit, 14500l stainless steel tank with cooling Height: 6200 mm Diameter: 2150 mm Gbjdpfjzzxhaex Akyju Operating pressure: 0.0 bar internal, 1.0 bar cooling jacket Material: Stainless steel 1.4301 (AISI 304) Design: Cylindrical, upright, on a central plinth; DN 40 outlet; top manway; CIP with RLV line; 3 cooling zones Previous application: Beer 3 units available Each tank has been leak-tested A 12-month warranty is provided for each tank.

Condition: excellent (used), Year of construction: 2024, operating hours: 3,540 h, functionality: fully functional, punching force: 280 t, X working area max.: 3080 mm Y working area max.: 1540 mm Operating hours: 3540 hrs Control: CNC control LABOD with graphics Standard equipment Hydraulic punching machine - Punching force: approx. 280 kN (28 tons) - Throat depth: approx. 1750 mm - Max. punching diameter: 70.0 mm - Max. stroke height: 90 mm, steplessly programmable up and down via control - Table width left + right: 3430 mm each - Table depth: 3160 mm - Table height: 900 mm + 8 easily exchangeable cassette holders + Rotary drive, tool holders top and bottom continuously rotatable 360° + 1 piece, indexable Revotool tools + Programmable clamp positioning + Scrap slug extraction system + Spray device + Brush table + Brush table extension tables + Multitalk, USB, SD memory card and network connection + Digital stroke height adjustment + Three-sided safety light barrier + Various intermediate matrix plates for Trumpf tooling sizes 1 and 2 + Tooling package + 1 set of keys and operating manuals Gbodpsz Rmanofx Akyju + Boschert EasySharp tool grinding device

Condition: used, Year of construction: 2001, machine/vehicle number: 11572, functionality: limited functionality, operating hours: 47,262 h, overall weight: 1,950 kg, The BTSA 180 is a Bruderer high-speed precision stamping press with a nominal force of 180 kN (18 tons). It is designed for continuous production with progressive dies and variable stroke rates from 100 to 1300 strokes per minute. The press is equipped with a Bruderer BZV 60 strip feeder, which processes strip widths up to 60 mm and material thicknesses up to 2 mm. The stroke is adjustable between 8 and 40 mm, and the strip feed height is adjustable between 50 and 100 mm to accommodate different tools and material profiles. In addition, a Bruderer U control system from Siemens is installed. The machine is partially functional: The buttons responsible for the two-hand control system respond with a delay or not at all in setup mode during material threading, which makes material threading time-consuming. The machine's spring dampers are worn, causing the machine to vibrate significantly during continuous operation. The rubber mounts for the dies are brittle and breaking off. The UVV inspection for 2025 has been carried out, as well as the annual maintenance for 2025. Nominal force: 180 kN (18 tons) Stroke rate: 100-1300 strokes per minute (variable) Strip feed: Bruderer BZA 60 Adjustable stroke: 8-40 mm Gbsdpfxez H H Dqs Akyju Main drive: 16 kVA Power supply: 400 V / 50 Hz Table area: 300x400 mm Strip feed height (adjustable): 50-100 mm Max. strip width: 60 mm Max. material thickness: 2 mm Machine dimensions: approx. 1300x1000x2300 mm Weight: 1950 kg Operating hours: approx. 47262 The machine is currently not running but is still connected so that it can be used in an emergency for production. Dismantling and removal are planned for the end of December, as a crane will already be on site by then to load the machine.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, operating hours: 38,149 h, controller model: Bosch MTX compact, laser power: 4,000 W, punching force: 22 t, sheet thickness (max.): 8 mm, Includes SheetMaster & GripMaster! TECHNICAL DETAILS Laser power: approx. 4,000 W Punching force: max. 220 kN Sheet thickness: max. approx. 8 mm Working area, laser operation (X × Y): approx. 2,540 × 1,280 mm Working area, punching operation (X × Y): approx. 2,540 × 1,370 mm Gedez Nn H Hopfx Akyebu MACHINE DETAILS Control system: Bosch MTX compact Dimensions & Weight Footprint (L × W): approx. 7,950 × 6,700 mm Machine weight: approx. 23,000 kg Total connected load: 87 kVA Operating hours: 38,797 h Beam on-time: 38,149 h EQUIPMENT Active dies SheetMaster GripMaster

Condition: used, 30m³ stainless steel tank features a full-height stainless steel coil Diameter 2.97m Total height 5.40m Cylinder height 4.30cm Godpfx Akjyw Ub Rjysbu Leg height 30cm Cone height 30cm Gear motor height 50cm