Used Spako Dw 150 Rw for sale (11,359)

Condition: used, Year of construction: 2014, Wittmann Battenfeld HM 150/750 Servo Power / Hybrid Machine / Operating hours: approx. 29,000 in automatic mode Year of manufacture: 2014 Injection unit: Screw diameter: 50 mm Injection weight: 402.2 g Injection pressure: 1,714 bar Shot volume: 442 ccm Clamping unit: Clamping force: 150 t Tie bar distance: 520x470 mm Dimensions of platens: 760x755 mm Ejector: hydraulic Clamping unit: hydraulic Control system: UNILOG B6P - touchscreen Additional equipment: Machine in very good technical condition Electric machine: energy-saving and very quiet Operating hours: approx. 29,000 in automatic mode Total operating hours: 36,714 Euromap 67 Robot interface Air valve x 1 Hydraulic core pull x 1 Injection unit is wear-resistant and corrosion-resistant Main drive motor - servo motor driven by inverter - energy saving Dimensions: Weight: 6,600 kg Length/Width/Height: 4.82x1.42x2.20 m All machines offered are started up by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Kedpfx Aezy Ilfsh Eonb Price: On request

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 150 350, total height: 4,600 mm, ram adjustment: 150 mm, installation height: 550 mm, table height: 1,000 mm, total width: 3,000 mm, total length: 4,200 mm, drop-through hole in table: 1,400 mm, table length: 3,000 mm, table width: 1,250 mm, pressing force: 250 t, control cabinet height: 2,000 mm, control cabinet length: 6,800 mm, control cabinet width: 600 mm, type of input current: three-phase, stroke length: 180 mm, stroke adjustment: 20 mm, input voltage: 400 V, distance between side stands: 810 mm, distance between stands: 2,020 mm, overall weight: 45,000 kg, control voltage: 24 V, year of last overhaul: 2026, input frequency: 50 Hz, ATTENTION: The machine will be completely cleaned before delivery. Fairings will be repaired if possible and deemed appropriate. Pressing force: 2500 kN Adjustable stroke: 40 - 180 mm Ram adjustment: 150 mm Stroke rate: 20 - 150/min Installation height for tool: 550 mm Table dimensions: 2000 x 1250 mm Ram dimensions: 2000 x 1000 mm Kodpfx Ajzrwzaoh Ejnb New control system: SIEMENS S7 300, 1st generation, control system designed according to VW specifications. Upon request, the machine can also be completely overhauled by ANDRITZ Kaiser, with a new S7 1500 control system.

Condition: refurbished (used), Year of construction: 2005, operating hours: 6,159 h, Doppstadt DW 2560 Buffalo - Year of construction 2005 - Operating hours 6149 - Engine Mercedes Benz 354PS - Roller : 17 teeth - Overband magnet - Remote control - Hydraulic drive ( self drive) Knodpjz Dcb Hjfx Ah Ejb Machine is overhauled and immediately available

Year of construction: 2020, operating hours: 1 h, condition: as good as new (ex-display), PTC JTR-H hot water unit 140°C, steam 140°C/32 bar and high-pressure steam 150°C/200 bar (only with the 350 bar version). Trailer similar, but not a Dynajet, Oertzen, Falch, DIBO, etc. - Single-axle trailer with a hot-dip galvanized frame, support leg with wheel, parking brake, automatic reverse gear, stand feet, tail lights and reflectors, towing hitch for 50 mm coupling, 13" tires and ABS. The following hot water models are available: Knedofdvkzspfx Ah Ejb JTR-H 21/200 | 21 l/min. at 200 bar | Engine: Kohler KDW 702, 12.6 kW JTR-H 23/350 | 23 l/min. at 350 bar | Engine: Kohler KDW 1404, 26 kW JTR-H 20/500 | 20 l/min. at 500 bar | Engine: Kohler KDW 1404, 26 kW JTR-H 30/500 | 30 l/min. at 500 bar | Engine: Kohler KDW 2204, 37.5 kW - Dimensions: 3,370 x 1,640 x 1,540 - Unladen weight: approx. 650 kg - High-pressure pump: Comet RW/TW Premium - HD hose reel: manual with max. 30 m of 1/2" or 100 m of 3/8" hose (included) - Water supply hose reel: manual with 50 m of 3/4" hose - Water tank: 600 l - Diesel tank: 75 l - Anti-limescale pump with tank - 75 kW heating module - Options and accessories available upon request

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 150 302, total height: 4,600 mm, ram adjustment: 150 mm, installation height: 550 mm, table height: 1,000 mm, total width: 3,000 mm, total length: 4,200 mm, drop-through hole in table: 1,400 mm, table length: 3,000 mm, table width: 1,250 mm, pressing force: 250 t, control cabinet height: 2,000 mm, control cabinet length: 6,800 mm, control cabinet width: 600 mm, type of input current: three-phase, stroke length: 180 mm, stroke adjustment: 20 mm, input voltage: 400 V, distance between side stands: 810 mm, distance between stands: 2,020 mm, overall weight: 45,000 kg, control voltage: 24 V, year of last overhaul: 2026, input frequency: 50 Hz, ATTENTION: The machine will be completely cleaned before delivery. Fairings will be repaired if possible and deemed appropriate. Pressing force: 2500 kN Adjustable stroke: 40 - 180 mm Ram adjustment: 150 mm Stroke rate: 20 - 150/min Installation height for tool: 550 mm Table dimensions: 2000 x 1250 mm Ram dimensions: 2000 x 1000 mm New control system: SIEMENS S7 300, 1st generation, control system designed according to VW specifications. Knodpfxozrwyps Ah Esb Upon request, the machine can also be completely overhauled by ANDRITZ Kaiser, with a new S7 1500 control system.

Condition: defective spare-parts repository (used), Year of construction: 2011, functionality: not functional, machine/vehicle number: 50.11.547, clamping force: 1,472 kN, screw diameter: 45 mm, clearance between the columns: 460 mm, ejector force: 4,000 N, opening stroke: 460 mm, total length: 6,000 mm, total width: 1,300 mm, total height: 2,000 mm, overall weight: 6,600 kg, number of injections: 1, power: 64 kW (87.02 HP), input voltage: 400 V, For sale is a hydraulic injection molding machine, NPM Multipower 150, manufactured in 2011. The machine is being replaced by a larger unit due to a capacity expansion. During the dismantling process, the control panel (HMI) was removed and sent in for repair. Since the machine is no longer needed, we would prefer not to invest in the cost of a repair. Kodpfxjza D Idj Ah Esnb For this reason, the machine cannot currently be put into operation or its functionality tested. The operating hours also cannot be read at this time. The machine was mainly used in our facility for the production of plastic caps as well as sample and prototype parts. Accordingly, it was rarely operated in multi-shift mode or under high load. The removed control panel will be provided with the machine. We are not aware of the current repair status. Upon request, we will gladly provide contact information for the responsible service partner so that a potential buyer can inquire directly about repair options. The machine is explicitly sold as an untested used machine without any functional guarantee. It is particularly suitable for specialized companies with their own maintenance department, for retrofit projects, or for obtaining spare parts. Inspections are possible and expressly encouraged, by prior arrangement.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 5,566 h, functionality: fully functional, overall weight: 25,000 kg, rotor diameter: 600 mm, number of blades: 42, total length: 9,630 mm, total height: 3,990 mm, total width: 2,547 mm, rotor length: 3,000 mm, power: 360 kW (489.46 HP), number of cylinders: 6, number of rollers: 1, For sale is a Doppstadt Büffel DW3060. This machine is one of the virtually indestructible Doppstadt machines. It is in used but good and operational condition. Can be demonstrated on-site while in operation. Can be transported on the road via axle with a suitable towing vehicle. An absolutely high-performance machine. Available immediately. Basic model DW 3060-C "Büffel" Central axle trailer chassis with 3 axles, 80 km/h road approval Braking system incl. ABS and lighting according to EC directive 50 mm EC tow hitch incl. attachment shoe Hydraulically adjustable support legs Splash guard (fenders inside and on the sides) Permissible total weight 25,000 kg Tires 385/65 R22.5 Additional hydraulic connections Hydraulic preparation for comb screen system and drive Fuel tank 2 x 300 liters Roller length 3,000 mm, diameter 600 mm Rear belt: belt length 5,500 mm, belt width 1,200 mm, hydraulically foldable, with anti-magnetic center section Longitudinal belt: belt length 3,300 mm, belt width 1,000 mm Centrally arranged lubrication strips 24-V electrical control Reversal of the roller by means of an electric motor when the engine is stopped Automatically reversible fan wheel Chassis with level adjustment Acoustic start-up warning Paint: 2-component paint RAL2011 orange Additional equipment: BioPower package Ksdpfjzp H Tysx Ah Eonb - Engine power: 360 kW, with reinforced planetary gearbox - Multi-tooth roller, length: 3,000 mm, diameter: 600 mm - Roller teeth 174 Form C armored (42 pieces) - Comb screen system with fine strip screen - Transmission oil cooler Hydraulic drive Radio remote control NEODYM over-belt magnet for rear belt Frame for over-belt magnet Humidification system (prepared)

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 71400, For sale is a RÖSLER Rotomatic R 150/15 SE, including a separation station, conveying technology, control cabinet, and control system. This unit comes from our ongoing production facility and was dismantled solely due to a plant upgrade. The unit is fully functional, ready for immediate use, and can be inspected and demonstrated in operational condition by appointment. Kjdpfszizu Esx Ah Eenb Technical data Manufacturer: RÖSLER Oberflächentechnik GmbH Model: Rotomatic R 150/15 SE Machine type: Continuous belt grinding machine Year of manufacture: 2016 Serial number: 71400 Working channel length: 15 m Total power: 17 kW Main drive: 12.5 kW Equipment Complete system including: Rotomatic R 150/15 SE Separation station Workpiece conveyor belt Grinding media return system Control cabinet with PLC control Pneumatic and process water technology Automatic continuous operation Integrated workpiece/grinding media separation Variable processing time Designed for continuous industrial operation Application areas Ideally suited for: Deburring Rounding Smoothing Cleaning Surface finishing Belt grinding of mass-produced parts Suitable for workpieces made of: Steel Stainless steel Aluminum Brass Zinc die casting Sintered and stamped parts The Rotomatic is particularly suitable for the continuous processing of large quantities and can be easily integrated into automated production lines. The Rotomatic principle ensures that sensitive workpieces are processed particularly gently and according to the first-in-first-out principle.

Year of construction: 2019, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 001, Equipment: CE marking, DEKCEL 150 W Industrial CO₂ Laser – Usable Area: 2,650 x 1,450 mm – Complete equipment ready for production Price: €7,500 + VAT For sale: a DEKCEL 150 W industrial CO₂ laser cutting and engraving machine, currently in operation at our facilities and available for demonstration before disassembly. The machine is being sold exclusively due to a technological upgrade following the introduction of new, state-of-the-art RF laser equipment. Equipped with a Ruida DSP industrial controller, RDWorks software, and a fully configured computer, it is ready to start working from day one. It features a large usable working area of 2,650 x 1,450 mm, ideal for machining entire sheets of MDF, HDF, plywood, acrylic, cardboard, leather, foam, rubber, and other non-metallic materials. The machine incorporates a fully operational 150 W RECI laser tube and also comes with a second, brand-new 150 W RECI laser tube, providing the buyer with significant savings on future maintenance costs. The price includes: • DEKCEL 150 W industrial laser machine. • Usable working area: 2,650 x 1,450 mm. • Ruida DSP industrial controller. • Computer with RDWorks installed and configured. • CW-5200 industrial chiller. • Installed and operational RECI 150 W laser tube. • New spare RECI 150 W laser tube. • Complete new optical head. • Two spare high-voltage power supplies. • Three industrial fume extractors. • New cable carrier chain. • Various additional spare parts. Knsdpfxezmqaxe Ah Eeb The machine can be seen in operation before disassembly, allowing you to verify its performance, precision, and cutting quality. An excellent opportunity to acquire a large-format industrial machine that is fully operational and comes with a significant set of accessories and spare parts, ready to continue production from day one. _____ This is not just a used machine; it is delivered as a complete industrial system with strategic spare parts included, which minimizes maintenance costs and ensures quick start-up.

Condition: used, Year of construction: 2021, The Smipack DV150 is a fully automatic monobloc overlap shrink wrapper with an inline infeed conveyor. It packs products like glass/PET bottles, cans, jars, and boxes at speeds up to 25 packs per minute using a single film reel system. [1, 2, 3, 4] Key Features Operation Modes: Works with film-only, or with pad/tray configurations depending on exact model variations (like ALX-T or ALX-P). Infeed System: Multi-row inline infeed with an electromechanical oscillating sorter to align products. Film Handling: Single film reel design with optional printed film centering devices. Shrink Tunnel: Built with an efficient double-chamber shrinking setup. [1, 2, 3, 4, 5, 6] Technical Specifications Max Output: Up to 25 packs per minute (ppm) Max Product Height: 380 mm Max Reel Size: 650 x Ø 400 mm Working Pressure: 6 Bar Machine Weight: Approx. 1,682 kg Kodpfx Ahjzp A Uaj Eonb ed linking conveyor into a high-performance double-chamber tunnel for final heat shrinking. Standard Built-In Features Pneumatic Reel Locking: Uses a dedicated reel chuck with convenient built-in rollers to streamline heavy roll replacements. Safety & Control: Equipped with sliding protection doors featuring a deceleration device, manual reel sealers, and a metric-graduation centering system. Sensor Grid: Features a complete array of photocells monitoring product presence, infeed obstruction, film wrapping, and tunnel outlet accumulation. Are you interested in reading about the FLXMOD® control system details, or do you need a list of available optionals like the printed-film centering device? AI responses may include mistakes. Learn more Year of construction: 2019 & 2021 Max speed: 72000 Current size (ml): 3×2 Container material: Can, Glass, Pet Max. container: height 170 mm Packaging Type: Film Number of lanes: 8 Max reel size: Ø 500 mm Number of reels: 2 Automatic Changeover: No Compatible Spare Parts: 6 months Dimensions: 17500x1800x2400 mm Power: 182 kW Compressed Air: 6 bar

Condition: used, mileage: 20,000 km, power: 110 kW (149.56 HP), first registration: 05/1989, overall weight: 7,490 kg, fuel type: diesel, color: red, next inspection (TÜV): 12/2026, gearing type: mechanical, loading space width: 2,500 mm, loading space length: 3,720 mm, loading space height: 1,610 mm, Year of construction: 1989, total length: 5,950 mm, total width: 2,500 mm, total height: 2,950 mm, number of seats: 3, Equipment: all wheel drive, 1st hand – volunteer German fire brigade. Only 20,000 total kilometers, verifiable. In regular use as a hose truck (SW1000) until 2025. Now sold only due to internal restructuring within the fire department. TÜV inspection valid until December 2026 (inspected anew at 20,178 km, currently 20,350 km). No issues whatsoever. Extremely robust MAN-VW all-wheel drive chassis. Permanent 4x4. Leaf spring suspension. Single rear tires. Wheelbase: 3,100 mm. Kodpfxexp Tage Ah Ejnb Original 7.49-ton 8.150 FAE model, complete with original registration documents and vehicle title, continuously registered as such until recently. Therefore, this fire truck can be driven directly with an old class 3 car driver’s license obtained before 1999. Unladen weight according to registration: 5,505 kg with the installed box body (body exterior dimensions: 3.72 m long / 2.49 m wide / 1.61 m pure box height plus roof structures). Based on experience, the bare chassis without the fire-fighting body weighs less than 4 tons. Therefore, highly attractive as a platform for building a robust expedition vehicle that, when ready for travel with practical equipment, realistically remains under the 7.49 t gross vehicle weight, perhaps even leaving some payload reserve. This example already features the newer 6-cylinder engine with 6,823 cc and 150 hp. 5-speed manual transmission with low-range and two locking differentials. 89 km/h top speed! Power steering. Tilting cab with roof hatch and 3 seats. Overall vehicle dimensions: 5.95 m long / 2.50 m wide / 2.95 m high. The roof is accessible via a ladder integrally mounted in the body. The special signaling system is still installed and functional. Tires: 10.00 R 20 (16 PR), in good condition. Two complete, good spare wheels are also available for this MAN-VW. Sale/transfer by arrangement. Small jaw-type trailer hitch, 2,000 kg max. braked trailer load or 1,500 kg unbraked. The MAN starts instantly and is ready to drive immediately. Thanks to many years of storage in a garage, this is a quality truck from a time when vehicles were still built with care. This offer is only valid for businesses or public authorities / emergency services. Subject to prior sale and errors. The stated purchase price is the final gross price = net price (differential taxation according to §25a German VAT law. Separate VAT cannot be itemized, nor will VAT be added to this purchase price).

Condition: reconditioned (used), Year of construction: 2018, overall weight: 30,000 kg, Doppstadt DW 3060K Biopower Type F M Shaft - Year of manufacture: 2018 - Engine: MTU R61300 with 490 hp - AD BLUE - Weight: 30,000 kg - Remote control - Humidification system - Rear conveyor belt 7m - Over-band magnet Knodezx Rz Tspfx Ah Eeb - Track chassis - Central lubrication system - Limiter - Roller: M 3000mm x 800mm - Teeth: 124 The machine is in its original condition, not repainted, only workshop-reconditioned.

Condition: excellent (used), Year of construction: 2017, Batch mixer, type WBX 150 1 Control unit for the mixer 1 Manual shut-off valve 1 Separate control panel ("remote control") Knedpfx Asztwbvjh Esb Technical data for the 150 series, WBH 150: Parameter | Value Nominal volume | 150 l Usable volume | 105 l A | 1,460 mm B | 670 mm C | 754 mm Empty weight | approx. 270 kg Subject to prior sale Please submit inquiries only by email. Note: The machine is in storage and can be inspected on site. The buyer must arrange for shipping. This is not included in the quoted price.

Year of construction: 2015, condition: ready for operation (used), machine/vehicle number: Nº 6 Y Nº 7, Equipment: CE marking, WINDLASER LS1626 Plus 150 W Industrial CO₂ Laser Machine Approximate working area: 2,600 × 1,600 mm – Complete equipment, ready for production Unit price per machine: €7,900 + VAT Ksdpszmqa Esfx Ah Ejnb For sale: WINDLASER LS1626 Plus 150 W industrial CO₂ laser cutting and engraving machine, currently in operation at our facilities and available for demonstration before dismantling. The machine is being sold exclusively due to a technological upgrade, following the introduction of new, state-of-the-art RF industrial laser equipment. It is equipped with a professional Ruida DSP controller, RDWorks software, and comes with a computer, fully configured for immediate operation. Its large working area of approximately 2,600 × 1,600 mm allows for the comfortable machining of entire MDF, HDF, plywood, acrylic, cardboard, leather, foams, rubbers, and other non-metallic materials. The machine incorporates a fully operational 150 W RECI laser tube, and is also supplied with a brand new 150 W RECI laser tube, providing the buyer with a significant reduction in future maintenance costs. Included equipment The price includes: • WINDLASER LS1626 Plus 150 W industrial laser machine. • Approximate working area of 2,600 × 1,600 mm. • Ruida DSP industrial controller. • Computer with RDWorks installed and configured. • S&A CW-6000 industrial chiller. • Installed and functioning RECI 150 W laser tube. • Brand new RECI 150 W replacement laser tube. • Complete new optical head. • Two spare high-voltage power supplies. • Three industrial fume extractors. • New cable carrier chain. • Various additional spare parts. _____ Materials that can be processed Ideal for cutting and engraving: • MDF • HDF • Plywood • Acrylic (PMMA) • Cardboard • Leather • Rubber • Technical foams • Non-metallic plastics • Other materials compatible with CO₂ laser technology A purchase with guarantees The machine can be seen in operation before dismantling. The buyer can personally verify its operation, precision, speed, and cutting quality, acquiring industrial equipment ready to continue producing from day one. _____ More than just a used machine It is delivered as a complete industrial production system, including strategic spare parts and high-value accessories that significantly reduce future maintenance costs, minimize the risk of production downtime, and allow you to start manufacturing from day one with complete confidence.

Condition: ready for operation (used), Year of construction: 2008, 1,0 piece injection molding machine with robot Manufacturer: DEMAG Type: IntElect 150/520-410 Year of manufacture: 2008 Clamping force: 150 tons Tie bar spacing: 520 x 520 mm Screw diameter: 35 mm Injection volume: 166 cm³ Shot weight: 146 g/shot Equipment: Part removal robot, manufacturer: Wittmann, type: W721, year of manufacture: 2006 Travel distances: Y = 550 mm, Y = 1,200 mm, Z = 2,000 mm 2 x core pull Kodpsz Dibmofx Ah Eonb Safety fence

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 102160, type of input current: three-phase, input current: 3 A, input voltage: 400 V, total width: 1,050 mm, total length: 3,160 mm, total height: 1,600 mm, overall weight: 600 kg, For sale: a very solid and fully operational Constantin Hang 150-06, the industry standard for press-fitting and crimping ring binder mechanisms onto folders, binders, and covers. Specifications and features: • Suitable for 2-ring and 4-ring mechanisms • Powerful mechanical eccentric press • Very robust German construction (cast iron) • Foot pedal operation for safe and fast working • Complete and ready for immediate use • Machine presses and crimps the legs of the ring mechanism in a single operation • Ideal for binderies, file manufacturers, and office supply production Kjdpfxsx A Ivvs Ah Ejnb Currently set up for 2-ring mechanisms (80 mm), but can be easily adjusted for other mechanisms. Technical data: • Manufacturer: Constantin Hang • Model: 150-06 • Serial number: 102160 • Country of origin: Germany Condition: Good, clean, and working condition. Can be demonstrated immediately.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, pressing force: 150 t, working width: 3,100 mm, working length: 3,100 mm, working range: 3,100 mm, Used High Quality, Fully serviced, Very Clean Bystronic 150ton x 3metre cnc pressbrake For Sale Very modern Bystronic Xpert 150/3100 Knodpfx Ahst Ettfe Eeb 8 axis 3 metre x 150 ton CNC down stroke hydraulic pressbrake for sale Bystronic – fully serviced with Bystronic uk from new Model: Xpert 150/3100 Working length 3100mm Max. press force 1500kn Max stroke 215mm 150/3100 free standing CNC Pressbrake 8axis / 8 axes: Y1 – Y2 – Z1 – Z2 – X1 – X2 - R1 - R2 Year 2018 Complete with: 1. Bystronic ByVision control 2. Upper and Lower Bystronic Tooling as per photos 3. Hydraulic upper and lower tool clamping 4. 6 axis back gauge 5. Crowning 6. No pit required

Condition: refurbished (used), Year of construction: 2014, machine/vehicle number: R-00598, load capacity: 150 kg, arm reach: 2,200 mm, controller manufacturer: IRC5, teach pendant manufacturer: DSQC679, Never-used ABB IRB 6620-150/2.2 manufactured in 2014.02. The robot comes with an IRC5 controller including Flexpendant DSQC679.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The oil is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: ABB Model: IRB 6620-150/2.2 Model Number: IRB Year of Manufacture Robot: 2014.02 Warranty term (months): 12   Payload (kg): 150 Reach (mm): 2200 Repeatability (mm): ± 0.03 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 880   Controller: IRC5 Year of Manufacture Cabinet: 2014.02 RCC Length (m): 14   Teach Pendant: DSQC679 Knodpfxjzxwquo Ah Esb Teach Pendant Cable Length (m): 15

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 7717000257A, overall weight: 1,550 kg, load capacity: 1,500 kg, input voltage: 400 V, input current: 20 A, type of input current: three-phase, Equipment: documentation/manual, DMG Mori PH150 Pallet Handling System (2023) – 4 Station –Very Low Use 2023 DMG Mori PH150 automatic pallet handling system in excellent condition with minimal prior use. Available immediately. Currently in storage and ready for installation into a new facility or existing machining cell. Specification: 4-position pallet handling system 4 x pallets included 1 x Pneumatic chuck for machine bed Pallet size: 500 x 500 mm Max pallet load: 250 kg Max load per level: 1,500 kg Axis travel: X 2,170 mm / Z 75 mm / C 360° Power supply: 400V Kodpfx Asyvhuhjh Esnb Condition: Installed 2023 Very low usage prior to decommissioning Stored in good condition Not currently installed or under power Key Benefits: Significant saving vs new Immediate availability (no OEM lead times) Ideal for increasing spindle utilisation and automation capability Compact, high-efficiency pallet system Important Information: Equipment is currently in storage and not commissioned Sold as seen Buyer responsible for transport, installation and commissioning Assistance with loading can be discussed if required Additional Information: Second identical unit also available if required Viewing can be arranged by appointment Specification and details are provided in good faith but are not guaranteed. Buyers are encouraged to verify all details prior to purchase.

Condition: used, Year of construction: 2007, total length: 3,550 mm, total width: 1,800 mm, total height: 2,800 mm, Colour: Grey Weight: 10.000 kg - Year: 2007 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: 11520 - Drive system: CNC - Control system brand: Baykal - Control system type: EC4-CNC - Power [kW]: 11.0 - Number of axes [pcs]: 3: Y1+Y2+X - Press force [ton]: 150 - Max. working width [mm]: 3100 - Column gap [mm]: 2550 - Max. stroke [mm]: 260 - Crowning system: CNC-controlled - Punch holder: Quick-release - Tool holder type: European-style - Transport dimensions: 3550mm x 1800mm x 2800mm (l x w x h) - Transport weight [kg]: 10000kg - Transport packages [pcs.]: 1 Financial information Kodpfozrxftox Ah Esnb VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2014, operating hours: 271 h, functionality: fully functional, machine/vehicle number: 639074, overall weight: 1,111 kg, load capacity: 150 kg, arm reach: 2,696 mm, This is a KUKA KR 150 R2700 extra F industrial robot with KRC4 control system, manufactured in 2014. Kjdpozl Aqtjfx Ah Ejnb We would also be happy to offer this robot as a fully refurbished unit! The control system includes the following options: BoardPackage EthernetKRL LoadDataDetermination Profinet KRC-Nexxt RemoteService SafeOperation UserTech

Condition: excellent (used), Year of construction: 2019, operating hours: 40 h, functionality: fully functional, machine/vehicle number: MCH-D 150, total length: 2,000 mm, total width: 1,000 mm, total height: 1,000 mm, overall weight: 2,000 kg, input voltage: 400 V, type of input current: three-phase, power: 55 kW (74.78 HP), input current: 55 A, input frequency: 50 Hz, Equipment: documentation/manual, MICROCUTTER EMULSIFIER SUITABLE TO CREATE FINE CHOP AND EMULSIFIED MIXES : Knedpfx Ahozrfg Rj Esb MEAT EMULSIONS SAUSAGE AND WURST EMULSIONS LIVER PATE MARINADES AND SAUCES FRUIT AND VEGETABLE PUREE'S SOUPS

Condition: used, Year of construction: 2008, functionality: unexamined, power: 25 kW (33.99 HP), type of input current: three-phase, temperature: 200 °C, total length: 1,630 mm, total width: 1,700 mm, total height: 2,950 mm, overall weight: 1,650 kg, number of chambers: 1, control type: PLC-controlled, fuel type: electric, We offer a used Nabertherm N 150/03 CDB, manufactured in 2008. This is a furnace for the catalytic removal of adhesive residue from parts coated using the metal or ceramic powder injection method. The binder contained in the load undergoes chemical decomposition using nitric acid and is removed in the form of a gas. Model: N 150/03 CDB Serial number: 199905 Year of manufacture: 2008 Maximum temperature: 200 °C Rated voltage: 400 V 3/N/PE ~ Frequency: 50/60 Hz Current: 50/23/26 A Power: 22.4 kW TECHNICAL DATA: ✅ Capacity: 150 l ✅ Maximum temperature: 200°C ✅ Chamber dimensions: 450x450x750 mm ✅ Overall dimensions: 1625x1930x2850 mm ✅ Total power: 25 kW ✅ Catalyst, programmable, historical curve tracking, nitric acid pump EQUIPMENT: ✅ Monitoring of nitric acid flow via a probe Knedpfx Ahszp Hfpe Eob ✅ API control ✅ Siemens S7-300 If you have any questions or require additional information, please send a message or contact us by phone.

Condition: used, mileage: 407,186 km, first registration: 11/2011, fuel type: diesel, overall weight: 7,490 kg, next inspection (TÜV): 02/2027, color: white, gearing type: mechanical, emission class: euro5, number of seats: 2, total length: 7,900 mm, total width: 2,550 mm, total height: 3,450 mm, loading space length: 6,050 mm, loading space width: 2,390 mm, loading space height: 2,350 mm, Equipment: ABS, tail-lift, ????? Fixed price ???? M.A.N 7.150 BL box van with tail lift for self-renovation into a motorhome First registration: November 24, 2011 407,186 kilometers (last oil change at 393,642 kilometers) Euro 5 ABS Radio CD 6-speed manual transmission Cruise control Rearview camera 2 seats (3 registered) Roof hatch Sun visor Electric windows Electrically heated exterior mirrors Air-suspended rear axle with lift and lower function Tires 225 / 75 R 17.5 M&S Box van by Junge, approx. 6050 x 2390 x 2350 mm Partially insulated Tail lift MBB / Palfinger Load capacity 1000 kg Platform length approx. 1800 mm Valid TÜV inspection until 02/2027 The vehicle was used as a motorhome, but is still registered as a truck (can be changed without much effort) Most of the equipment has been installed in another vehicle (see pictures). There are sliding rails in the rear, so the interior can be moved forward, creating space at the rear to transport 2 motorcycles or similar. Solar panels were installed on the roof of the box van. New intercooler, steering gear, front brakes with discs installed at 377,809 kilometers. Knjdpfx Ahozb T H Sj Eeb VAT is calculated according to § 25a.

Condition: good (used), Year of construction: 2017, Standard turning diameter 150mm, maximum cutting diameter 255mm, maximum cutting length 685mm , Bar capacity main spindle 51mm, spindle speed 5,000rpm, sub-spindle 5,000 rpm, C axis 0.001 degrees, 3 x turrets 24 stations, Knedpfx Aozwm Hpeh Eob Y axis +/-45mm, milling speeds 6,000 rpm, main spindle 15kw, Fanuc 31i, swarf conveyor, barfeed unit, parts catcher