Used Smb N5E for sale (67)

Condition: used, machine/vehicle number: 1285A, mileage: 40,141 km, power: 46 kW (62.54 HP), first registration: 01/1964, fuel type: gasoline, color: green, gearing type: mechanical, Equipment: all wheel drive, trailer coupling, Oldtimer-Tuv is made new only 332,- Euro tax and insurance per year , The Willys-Jeep is the Us-Jeep of the second world war. A real feast for the eyes for every military vehicle fan. The Jeeps are in a very good original condition, also the body is in a great condition has not been welded yet has of course no holes!!!! directly from the French military very well maintained and serviced!!! Equipped with: folding windshield, soft top, manual transmission with 3 gears plus off-road reduction, four-wheel drive, 4-cylinder in-line engine side-controlled with 2161cm? The Jeep drives really great!!! Tire size 6.50 - 16, ere M201 in stock! Also other all-wheel drive vehicles and other military vehicles are still available in my offer. All my vehicles can be seen with technical data and prices on my homepage. For more information call 0049 (0)2248 le Greetings your Philipp from the Hanfbachtal Iajdpfxoqx Szgj Aa Esw

Condition: new, functionality: fully functional, machine/vehicle number: M3BP315SMB4, power: 110 kW (149.56 HP), input voltage: 500 V, input frequency: 50 Hz, input current: 158 A, type of input current: three-phase, protection type (IP code): IP55, New ABB AC 500V * Power: 110 kW * Input voltage: 500 V Iaodpsxdb Egefx Aa Esw * Input frequency: 50 Hz * Input current: 158 A * Type of input current: three-phase * IP 55 * New motor (year of construction: 2018)

Condition: used, Year of construction: 2002, DRAW-SIZE-WARPING LINE FOR FILAMENT YARNS TO PROCESS POY (FROM BOBBINS) INTO FULLY DRAWN SIZED WARP BEAMS : MAKE : SUCKER-MUELLER - HACOBA TYPE : NZB-Z WW : 180 cm YOC : 2002 ( USED ONLY 4 YEARS!, then stored ) SPEED : 500 M/ MIN EQUIPPED WITH : - WAXING ROLL - 2 HOT AIR DRYING CHAMBERS (1995) 150˚C - 9 STEAM DRYING CYLINDERS 180cm ( 1995) 130 ˚C - YARN TENSION CONTROL SYSTEM BY ‘TENSOSCAN’ - YARN DRYING CONTROL SYSTEM BY ‘PLEVA’ - YARN BREAKAGE INSPECTOR BY ‘CAMSCAN’ CREEL WITH BOBBIN CARRIAGE MAKE : ROSTONI TYPE : RCS/GB/1344 YOC : 1995 NO. OF BOBBINS : 1344 EQUIPPED WITH : - MOVABLE TENSIONER FRAME - EYE GUIDE BOARD - TENSION VARIATION SIZING KITCHEN MAKE : MARIOTTI & PECINI YOC : 2002 CAPACITY : 700 LITERS INOX TUB + INOX STOCK TUB 700 LITERS WITH ASSEMBY BEAMER 300CM MAKE : SUCKER-MUELLER TYPE : WN YOC : 1985 BEAMNING SPEED : 150 M/MIN WW : 300 CM BEAM DIA : MAX 1000 MM BEAM WIDTH : 3000 MM ( ROLL WIDTH 3200MM) - LEAVELING DEVICE SYSTEM ( FOR 8 SECTION BEAMS) - WITH TENSION CONTROL SYSTEM FOR WARPBEAMS Iasdpfjy Spl Hex Aa Eew - WITH 2 x DOUBLE DECK BEAM STAND FOR 10 BEAMS & 6 BEAMS BY SUCKER MULLER ( 1987) TYPE AB50

Condition: used, axle configuration: 2 axles, first registration: 05/2009, loading space length: 7,400 mm, loading space width: 2,300 mm, loading space height: 1,280 mm, total length: 8,800 mm, total width: 2,500 mm, total height: 2,900 mm, suspension: steel, tire size: 112/25, color: other, Year of construction: 2009, Equipment: ABS, = Additional Options and Accessories = - EBS = Notes = Number of axles: 2, Twin tires, Unladen weight: 6,230 kg, Gross weight: 33,000 kg, Chassis type: Complete chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Leaf suspension, ABS, EBS, Body year: 2009, Body material: Steel, Side wall material: Insulated, Number of sides: 1 side, Tipper drive: PTO, Drum volume: 21, Drum volume unit: m³, Axle type: SMB Ijdpjyu Hz Ajfx Aa Ejaw = Further Information = General Information Cab: Day cab Registration number: KLEYN1 Driveline Fuel type: Diesel Transmission Transmission: Manual gearbox Axle Configuration Tire size: 112/25 Brakes: Drum brakes Suspension: Leaf suspension Axle 1: Twin tires; Left inner tire tread: 13 mm; Left outer tire tread: 11 mm; Right inner tire tread: 15 mm; Right outer tire tread: 7 mm Axle 2: Twin tires; Left inner tire tread: 10 mm; Left outer tire tread: 7 mm; Right inner tire tread: 13 mm; Right outer tire tread: 10 mm Weights Curb weight: 6,230 kg Payload: 26,770 kg Gross vehicle weight (GVW): 33,000 kg Environmental Emission class: Euro 0 Maintenance APK (Technical Inspection): Valid until 10.2026 Condition General condition: Average Technical condition: Average Visual condition: Average Damages: None = Company Information = Kleyn Trucks is one of the world’s largest independent dealers in used vehicles. Here you can choose from a constantly changing inventory of 1,200 used trucks, tractor units, trailers. Our offering covers all European brands, years of manufacture, and price ranges. Why buy at Kleyn Trucks? Easy! • Large, fast-changing stock • Recognizable quality • Good pricing • Reliable business practices • We speak many languages • We understand our clients • Support with import and transport • (Export) license plates are arranged quickly • Competent technical services • The security of 'recognizable quality' • And much more... Visit our website for special offers and a complete stock list: Leasing via Kleyn Trucks is available in most European countries! Quickly calculate your leasing rate and submit a request via our website. Ask directly about our European warranty packages.

Condition: used, Year of construction: 1992, Overview This complete automatic can filling line has a nominal output of approx. 20,000 cans/hour for 330 ml cans (can type 211/202), packed 24 cans per foil-shrunk tray. The core is an O+H / KHS Hansacan filler with 30 filling valves, mechanically blocked to a Ferrum F 505 G seamer with 5 seaming heads. Empty cans are supplied by a TMG Impianti Vega 120/B depalletizer and rinsed on a Hysek Rinsstar 20000 rinser before filling. A date/coding printer is not included. Technical data - Line type: Complete automatic can filling line - Nominal output: approx. 20,000 cans/hour (330 ml), product- and temperature-dependent - Container: 330 ml can, can type 211/202; 24 cans per foil-shrunk tray - Controls: PLC Siemens S7, Siemens SIMATIC HMI - Warmer and drying station reconditioned; fill-height control and packaging machine new Iaodpfx Aajzlqu Ts Eow Equipment - Can Depalletizer | TMG Impianti | Vega 120/B | tier-sheet removal, can table, pallet magazine | 2014 - Can Rinser | Hysek | Rinsstar 20000 | filtered-water rinse | 2001 - Can Filler | O+H / KHS | Hansacan | 30 filling valves, fixed for can type 211/202, will be general overhauled | 1992 - Can Seamer | Ferrum | F 505 G | 5 seaming heads, blocked with the filler | 2010 - Can Warmer | SMB | stainless-steel tunnel | warms cans to approx. 25 °C before packaging | reconditioned - Fill-Height Control | Heuft | incl. pushing/reject station | new - Can Drying Station | Gesete | air-dries cans before coding | reconditioned - Packaging Machine | Termo Pack | UMT-1500 | tray erector, packer and foil shrink | new - 2x can turning stations (330 ml can) - Can conveyor system incl. electrical control panel (PLC Siemens S7) - Tray conveyor system incl. drive station Condition Used line delivered in reconditioned or new condition. The filler and Ferrum seamer are reconditioned and blocked as one unit with a new electrical panel (PLC Siemens S7), new pneumatic panel and renewed pneumatic valves; the can warmer and can drying station are reconditioned; the fill-height control and packaging machine are supplied new. This work is carried out as part of the order, so the line is supplied component by component and is not yet assembled or tested as one running unit. The can depalletizer is the exception - it is already fully reconditioned and in stock. Filler and seamer are delivered with CE declaration and full documentation. Components can be inspected on request. Availability On request; delivery time as per agreement. Reconditioned and new-build components are supplied with a lead time after order. Location and inspection on request.

Condition: new, Ruchsr Assembly line consisting of: Item 1.0 / RU-CBM 4000 work table with running rail extended by 500mm for additional assembly an aluminum holder screwing machine for RU-CSA-SMB or RU-CSA-SMZD with RU-SH special screwdriver, support table Length 4000 mm, width 1400 mm, inclination of the working platform manually adjustable. Holder for fitting scissors or fitting punch. 16 pieces of swiveling counter-holders for hanging the wings, completely pneumatic Foldable for unhindered movement of the wings on the table surface. Device for scanning the sash fitting length for constant and variable/central gear seat for already drilled wings, colored Dimension recognition of the fittings. RU-SH, special screwdriver with pneumatic depth switch on carriage mounted, safety control, pneumatic height adjustment, Screw feeder with automatic shutdown of the filling container (Manual insertion for a second screw length on the special screwdriver upon request). RA-8, turret stop for 8 screw levels mounted on the carriage. RA-4, turret stop for 4 different wing widths Swivel table mounted. Pneumatic wing measurement sensing. operated, scanning range up to 2500mm simultaneous clamping of the scanning. PSF - Pneumatic tensioning device for sashes. Working height adjustable from 900 - 1000 mm. Support table covered with felt. Running rail extended to the left by 800 mm. Item 1.1 / 5035-1 Pneumatic swivel device of the work surface with foot valve Item 1.2 / 0500000 Holder matched to customer punch/scissors. For mounting a hardware punch provided by the customer or Fitting shears (third-party manufacturer) on the sash assembly table. Please specify make when ordering!!! Item 1.3 / 5597-7 Driving device for RU-CBM on semicircular rails. The castors are on the left and right of the base frame of the table mounted. Item 1.4 / 6354-6 Iajdpfjd Ih Huox Aa Esw 3 double meters of semicircular rails 30 x 10 mm. Item 1.5 / 0730000 RU-SBL3000/40 free-standing fitting bearing, Length 3100 mm, depth 1250 mm, height 2200 mm, Stand frame on the front without supports, 40 compartments, divided into 10 compartments in a row by dividers and a continuous shelf at the top, Compartment size: width 280 mm, height 150 mm. Item 2 RU-CSA-SMB aluminum holder screwing machine with automatic Screw feeding and manual feeding of the aluminum holders from one traveling box with pneumatic positioning device, Screwdriver with depth cut-off with 4-fold turret stop. Pneumatic adjustment device in the y direction against 2 pieces 6-fold Revolver attacks. Feed container for manual feeding of rotary holders or clip holder in square shape 18.5 x 18.5. The holder is manually pushed into a channel in the box and with positioned in front of the screwdriver mouthpiece using a pneumatically operated slide. Profile depth max. 150 mm, screw spacing in the y direction max. 120 mm. Item 3 RU-S48-A6-350 column slewing crane for chain hoist, with 6 m aluminum boom Version with column, smooth-running boom and sliding chassis for swivel and trolley travel manually by pulling and pushing the load. Projection 6 m Construction height 4,461 m Lower edge of boom 3.722 m (top edge of boom 3.9 m) Swivel range max. 270° Painting of the steel construction in RAL 7035 The base plate is attached to the on-site hall floor At least 250 mm thick. Designed, of course, according to the valid STANDARD EN 13155...

Condition: used, axle configuration: 3 axles, first registration: 10/1996, total length: 11,200 mm, total width: 2,550 mm, total height: 3,200 mm, suspension: parabolic leaf (spring), tire size: 385/65 R22,5, Year of construction: 1996, Equipment: ABS, = Additional options and accessories = - Leaf spring suspension = Further information = Tire size: 385/65 R22.5 Axle brand: SMB Brakes: Drum brakes Suspension: Parabolic spring suspension Unladen weight: 5,910 kg Payload: 32,090 kg Iedpfxezlb E Aj Aa Ejaw GVW: 38,000 kg Tipper: Rear

Condition: used, Year of construction: 2016, operating hours: 1,171 h, functionality: fully functional, load capacity: 60 kg, arm reach: 2,050 mm, controller manufacturer: ABB, controller model: IRC5, teach pendant manufacturer: ABB, teach pendant model: FlexPendant, ABB IRB 4600-60/2.05 – 6-axis industrial robot with IRC5 controller and FlexPendant The ABB IRB 4600-60/2.05 industrial robot is designed for demanding production applications and process automation. Its 60 kg payload capacity and 2050 mm reach provide high dynamic performance, high rigidity, and excellent positioning accuracy. The offered set comes from the research and development (R&D) department and includes a complete system ready for integration. The robot is ideal for applications such as: - CNC machine tending, - transferring and manipulating parts, - assembly, - packaging, - palletizing, - vision systems, - grinding and surface finishing, - R&D workstations. The set includes: - ABB IRB 4600-60/2.05 robot, - ABB IRC5 controller, - ABB FlexPendant operator panel, - complete set of robot cables. The robot has the following licenses: Advanced Robot Motion, Absolute Accuracy, PROFINET Controller/Device, World Zones, Independent Axis, Path Recovery, Path Offset, Collision Detection, PC Interface, FlexPendant Interface, Multitasking, Sensor Interface, UDPUC Driver, Externally Guided Motion (EGM). Technical condition The robot starts up correctly and communicates with the IRC5 controller. The operator panel displays message 38200 – Battery backup lost. This indicates a loss of power to the battery that supports the encoders (SMB Battery). This is a typical message after the battery has been discharged or disconnected and does not indicate a defect in the robot. After replacing the battery, a calibration/axis synchronization procedure will be necessary. Duty Time Counter: 1171 h Specification Manufacturer: ABB Model: IRB 4600-60/2.05 Year of manufacture: 2016 Payload: 60 kg Reach: 2050 mm Number of axes: 6 Controller: IRC5 Operator panel: ABB FlexPendant RobotWare: 6.08.00.01 Iodezkbpfspfx Aa Ejaw Condition: used We provide a start-up guarantee.

Condition: used, *Available from approx. end of 2025* Fully automatic finger jointing line for the following dimensions: Thickness: approx. 24 – 100 mm Width: approx. 80 – 240 mm Finger jointing length: 400 – 1,500 mm Finished length: 2.50 m – 13.50 m continuously variable Consisting of the following system components: - SMB vacuum destacking lengthwise with 2 lifting tables and 2 package roller conveyors, built in 2013 Package dimensions max. 1.20 x 1.20 x 6.00 m 4 suction pads Sicko system Separation and infeed into roller conveyor for scanner feeding, board turner, switch for too moist, too dry, switch for B-quality, marking station or automatic operation - Bidac end-face scanner for cupping detection, built in 2013 - Brookhuis moisture measurement FMI 5 Year of manufacture 2019 - Microtec scanner Goldeneye 502, year of manufacture 2012 with X-ray, 4 color cameras and new optimization software - Dimter-Opticut 350-2, year of manufacture 2003 with paddle ejector, year of manufacture 2009 and associated sorting belts and pneumatic ejector for 2 additional qualities - NKT packaging - NKT finger jointing system with turntable Spezialpack AH 1050, year of manufacture 2005 consisting of: Milling machine · Tipping station · Threading section length 5.0 m · Cyclic press length 6.00 m · Cross-cut saw - SMB stacking machine, year of manufacture 1998, 2.50 - 13.50 m length, divisible into 2 units (e.g. 2 x 5.0 m) 8 stacking arms, 8 stacking tongues, manually adjustable electro/hydraulic stop, package width: max. 1200 mm, package height: max. 600 mm, hydraulic package pusher Iodpfxjvvi Tys Aa Eeaw Storage location: Customer

Condition: new, axle configuration: 2 axles, Year of construction: 2026, Equipment: ABS, ZWF/W 18 Center Tube, Central Axle Lift Trailer, Tire Size 22.5, Single Dimensions Chassis designed for interchangeable bodies from 7150 to max. mm (symmetrical bodies) Chassis designed for rear-flush mm (with impact buffer) Test lowering heights: ZWF: Vehicle must lower at least +70mm and raise -20mm, WF: +60mm/-20mm, WFS: +60mm/-20mm Axle loads: 18,000 kg (2 x 9,000 kg) Spring center approx. 1300 mm Support load approx. 1000 kg Lowering heights approx. 1120 to max. 1320 mm via air suspension of the trailer and the tractor unit Coupling height (low coupling) approx. 400 mm unladen Ride height unladen approx. 1100 mm 2nd ride height, if axle lift is used, is approx. 40 mm higher (tire lift via axle lift increases the ride height), only if necessary Ground clearance approx. 1070 mm on level ground Chassis No. generally stamped on the side of the longitudinal member, right side, approx. 100 mm from the front E-wheel holder Prepared for E-wheel holder in winch design for 1 E-wheel Front stop, foldable and adjustable for 7150 mm symmetrical interchangeable bodies Support winches 1 set of drop-leg supports at the rear, height-adjustable 1 set of support winches at the front Coupling device Coupling spring travel approx. 1400 mm Intermediate distance 760 mm (with mm interchangeable body) Connection lines for lights/brakes, route lines inside/on the drawbar on the right Storage for connection lines on the side of the drawbar Drawbar rigid (center tube) with bolted drawbar eye Drawbar eye ø 50 mm Iedpozir Ipjfx Aa Esaw SMB axle with Haldex/Wabco/Knorr brake and Weweler air suspension selected 2x axle with large disc brake (430, or 4309/4312/4345) 2x axle 9t 22.5 disc brake, single tires for air suspension Bellows plates, rotate at 340-400 lift (not on the bogie, not with SMB) Lifting and lowering device with 1 rotary slide valve Knorr/Wabco Axle distance approx. 1360 mm (with total lift of approx. 300 mm, 340 mm or 400 mm) 2x air suspension, total lift approx. 400 mm 1 coupling head each, red and yellow Test nipple for brake cylinder pressure on the brake cylinder at the front right Air reservoir 2 x approx. 80 l in steel, painted black (1x brakes, 1x lifting and lowering) Lifting and lowering device at the rear left in the direction of travel Tire pressure control, basic version, connected to the CAN bus system of the EBS Brake/ABS EBS brake system, manufacturer Knorr/Wabco/Haldex at our choice, with Roll Stability Program 2x wheel attachment by center centering 4x tires 385/55 R 22.5 instead of 385/65 22.5, brand manufacturer at choice, system on -wheel 11.75 x 22.5 Brand tires 385/55 R 22.5 at choice Spiralflex Spiralflex cables and hoses for light and brake connection to the tractor unit, with mounting plate (standard) 15-pole plug or socket at the front Lighting system 24 Volt with large multi-function lamp Lighting system/wiring system, manufacturer at our choice (closed lighting system) License plate lighting Rear lights (LED) under the rear container support, beam of light to the rear Rear lights (LED) at the very front, under the stop, beam of light to the rear Side marker lights (LED), flashing (all SIDE lights flash), attention! Possible problems with tractor units! 9 (min.)-pole cable as connection front-rear (min.) Position lights (LED) mounted on a separate holder (not attached to the lamp) Position of position lights: Mounted on the underrun protection (if there is a kink to the rear, the UFS will not be pinched) Position light (LED) at the

Condition: like new (used), functionality: fully functional, Very nice strapping machine for sale. Isdpfx Aaszdzgds Esaw Automatic strapping machine SMB (CYKLOP) model AMPAG SPRINT. Blue model, on wheels, 600x600mm. Performance: up to 53 straps/min, depending on tension force and frame size. Package dimensions: width: min. 100 mm / max. 600 mm Standard model: height: min. 20 mm / max. 600 mm Strapping material: 5 - 9 mm wide polypropylene on a large spool. Made in Germany. You are welcome to test this machine at our facility. We can arrange transportation and packaging for you and load it into a truck or container. Please inquire about a price including transport (location: the Netherlands). Hnsch Tb Aszdr Ixjw Don Best regards, Henk Hoos.

Condition: used, axle configuration: 2 axles, total width: 25,500 mm, total height: 32,000 mm, Year of construction: 2024, Equipment: ABS, For inquiries regarding the vehicle, please contact Mr. Seidel (phone number available upon request). Wörmann BauTL 105 55/200 low-bed trailer SAE-SMB axles, drum brakes, Knorr ABS, spring brake, 40 mm drawbar, Duomatik, cargo area dimensions: length 5,600 mm, width 1,990 mm, height 400 mm, tire tread: 1st axle 14 mm, 2nd axle 13 mm. Upon request, we will provide you with a leasing or financing offer. Mr. Seidel (phone number available upon request) will be happy to assist you. Further information can be found on our website. ... Errors, changes, and prior sale are subject to change!!! - = Further information = Unladen weight: 2,700 kg Isdpfsyfqa Dox Aa Ejaw Payload: 7,800 kg GVWR: 10,500 kg Please contact Tobias Ebert for further information.

Condition: used, maximum load weight: 7,618 kg, overall weight: 9,990 kg, axle configuration: 2 axles, first registration: 11/2020, loading space length: 5,000 mm, loading space width: 2,000 mm, loading space height: 250 mm, total width: 2,550 mm, total height: 3,020 mm, Humbauer tandem axle trailer with 2 axles and ramps Type: HS 105020 BS Iaodpfxjy Unvcs Aa Eow Payload: 7618 kg Material: Aluminum Brakes: Drum brakes Axle: SMB 3x support points 2x ramps (length: 2.30 m and width: 0.45 m) Length: 5.00 m Width: 2.00 m Height: 0.25 m We would also be happy to assist you with financing/leasing options through our partners. All information is subject to change without notice. Errors and prior sale excepted.

Condition: used, Year of construction: 2000, Used bed-type milling machine from Wagner Model: SMB 2000 Heidenhain TNC 426 CNC control Ijdpoy Atypjfx Aa Esaw Including various tool holders (excluding tools) SK 50 spindle taper Swivelling milling head

Condition: used, 2-axis pick-and-place unit, loader, servo robot, workpiece gripper, component insertion unit, pick-and-place robot Pick-up device, handling device for presses, lathes, etc. GETECHA, Type GL-20S Serial No. 13836, Year of manufacture 10/2003 Travel range, Z-axis: 1900 mm Travel range, Y-axis: 250 mm Travel speed, Z-axis: max. 1100 mm/sec. Travel speed, Y-axis: max. 227 mm/sec. Continuously variable travel speed in the Y and Z axes via servo motors SMB - Precise axis movement via linear guides - Control system: epis - Control panel located nearby Iajdpfoharwysx Aa Eew - Interfaces for conveyor belt, gripper magnets, ejector cylinders, vacuum, gripper - External monitoring inputs for emergency stop, press open, press closed, safety doors closed, automatic mode - Mounted gripper with 3 lifting magnets, 3 pneumatic ejector cylinders (30 mm stroke), 1 pneumatic clamping cylinder (40 mm stroke) - Operating hours: 25998 hrs. The unit was used as a loader/pick-up device on a press. Space requirement L x W x H: 2900 x 1800 x 2000 mm Weight: approx. 800 kg Good condition

Condition: ready for operation (used), SMB Combisifter 10/32 + 32/60 2 fractions separates wood, plastic, foil and paper, wind sifting with filter system, 2 vibrating chutes, airlock, control cabinet with complete control system, mobile with hook trolley, self-erecting, compressor for filter cleaning, 1000 operating hours. Iedpfx Aop Aunlsa Eoaw

Condition: used, mileage: 767,029 km, first registration: 03/2010, next inspection (TÜV): 06/2025, emission class: euro5, Equipment: parking heater, tail-lift, Make: MAN Type 12.250 B/L Vehicle type: Refrigerated box trailer Power in kW/hp 184/250 First registration / TÜV Mileage reading: 767,029 Loading area: 7.25 x 2.45 x 2.60 m Tires: 245/70R17.5 Tread depth in mm: 4/4-6/6/10/10 Axle type: Spring/Pneumatic Total weight: 11,990 kg Unladen weight: 8,020 kg Equipment: AS Tronic transmission / engine brake / air conditioning / auxiliary heating / single bed / radio/CD / generator: THERMO KING MD 200 / LBW MBB 1000 / tow bar / Make: Steinbrügge Type: ANH12 Vehicle type: Refrigerated trailer First registration 03/2010 Loading area 7.00 x 2.45 x 2.60 m Ijdov Tgwdopfx Aa Eoaw Tires 285/70 R19.5 Tread depth in mm 12/11/12/10 Axle version SMB pneumatic Total weight 12000 kg Unladen weight 5640 kg Equipment: Trailer with through-loading / THERMO KING UT1200X aggregate / LBW MBB 1000 As seen or offered, without additional services/accessories. Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is required, we would be happy to provide you with a quote from our partner workshops! The vehicle may be covered with advertising and/or lettering. Our general terms and conditions of delivery and payment apply. We support you with exports, preparing export documents, obtaining license plates, supplier declarations, etc.! The information provided in advertisements, on the internet, on price tags, and in pictures are non-binding descriptions and do not constitute guaranteed properties. The seller assumes no liability or warranty for typos or data transmission errors. Listed features may need to be checked separately. We expressly reserve the right to prior sale, as we also offer this item on other portals. Information about accessories is provided without guarantee. Subject to change, prior sale, or errors. We offer and strongly recommend viewing and inspection to ensure that the buyer is not misled about the condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly desired.