Used Schlick Sandblasting Unit for sale (31,831)

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, bar diameter (max.): 32 mm, turning length: 80 mm, rotational speed (min.): 3,150 rpm, drilling depth: 80 mm, No minimum price – guaranteed sale to the highest bidder! The machine is sold complete with collets, holders, and additional accessories! For more Schütte multi-spindle machines from the same location, see below! TECHNICAL DETAILS Maximum turning length: 80 mm Maximum drilling depth: 80 mm Largest material passage: 32 mm Maximum bar feed: 125 mm Spindle speed (turning): 200–3,150 rpm Spindle speed (right-hand threading): 11.2–1,575 rpm Thread cutting unit: Right-hand thread via undercut Ndjdpfx Afoz Ag A Is Sob MACHINE DETAILS Coolant capacity: 600 l Pump output: 170 l/min Dimensions & Weight Footprint: 7.3 x 2.5 m Height: 2 m Weight: 8,300 kg Voltage: 380 V Frequency: 50 Hz Main drive: 20.5 kW Immersion pump: 1.5 kW Feed drive: 1.5 kW Hydraulic pump: 1.5 kW Circulating oil pump: 0.25 kW EQUIPMENT 6 cross slides 6 longitudinal slides 6 cams for cross slides 6 cams for longitudinal slides Operating tools Collets Holders Additional accessories

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, bar diameter (max.): 32 mm, turning length: 80 mm, drilling depth: 80 mm, No minimum price – guaranteed sale to the highest bidder! This machine is sold complete with collets, tool holders, and additional accessories. For more Schütte multi-spindle lathes available from the same site, please see below! TECHNICAL DETAILS Maximum turning length: 80 mm Maximum drilling depth: 80 mm Maximum bar diameter, round: 32 mm Maximum bar diameter, square: 22 mm Maximum bar diameter, hexagonal: 27 mm Maximum bar diameter, octagonal: 29 mm Spindle pitch circle diameter: 300 mm Standard bar feed up to: 125 mm Special bar feed up to: 290 mm Standard longitudinal slide travel, total: 100 mm Standard longitudinal slide travel, working travel: 80 mm Special longitudinal slide travel, total: 145 mm Special longitudinal slide travel, working travel: 115 mm Upper cross slide travel, total: 50 mm Upper cross slide travel, working travel: 33 mm Middle cross slide travel, total: 50 mm Middle cross slide travel, working travel: 30 mm Lower cross slide travel, total: 60 mm Lower cross slide travel, working travel: 37.5 mm Maximum material passage: 32 mm Ndedpfjz Ag Abjx Af Seb Maximum material feed: 125 mm MACHINE DETAILS Voltage: 400 V Frequency: 50 Hz Coolant capacity: 700 l Pump: Submersible electric pump Pump output: 180 l/min EQUIPMENT High-speed drilling unit Gripper unit Reaming unit Independent auxiliary longitudinal control Powered cross slide adjustment Collets Tool holders Additional accessories

Condition: new, Year of construction: 2025, functionality: fully functional, Cabinet Sandblasting Machine CORMAK 1200L is a premium industrial-grade surface treatment device designed for high-efficiency abrasive blasting operations. Its double-sided construction with two independent working stations allows two operators to work simultaneously, significantly increasing productivity and reducing downtime. The cabinet is designed for intensive use in workshops, regeneration facilities, shipyards, automotive, aerospace, and heavy industries. Main advantages of the machine Large 1200-liter working chamber – enables sandblasting of large metal components and structural elements. Double-sided operation – two pairs of gloves, two blasting guns, two control systems, and two cyclone extraction units allow two operators to work at the same time. Dust-free operation thanks to efficient extraction systems and sealed perimeter gaskets. Durable steel construction – designed for demanding industrial environments. Compatibility with various abrasives: corundum, glass beads, electrocorundum, crushed shells, and technical sand. 15 replaceable protective visor films – ensure long-lasting visibility during operation. Intuitive operation – foot pedals, ergonomically positioned connections, and pressure control systems. Construction and technology The CORMAK 1200L model is manufactured from high-quality steel and protected against corrosion. Two working stations located on opposite sides of the cabinet allow simultaneous blasting from both sides of the workpiece. Each station is equipped with an independent blasting gun, pressure regulator, foot pedal control, and cyclone dust extraction system. This solution ensures high productivity while maintaining safety standards and operator comfort. The spacious interior and wide access openings allow easy handling of large components. Precision and work efficiency The operating pressure range of 4–8 bar allows adjustment of blasting parameters according to the type of material and abrasive used. The dual nozzle system and independent workstations guarantee high productivity without compromising precision. Closed-loop operation combined with an efficient dust extraction system provides the operator with excellent visibility and a clean working environment. Applications The CORMAK 1200L cabinet sandblasting machine is a versatile industrial solution suitable for many applications, including: Sandblasting of wheels, frames, suspension components, and body parts. Metal blasting in manufacturing and repair facilities. Surface preparation before powder coating, galvanizing, or welding. Cleaning, smoothing, and restoration of industrial, wooden, and plastic components. Professional abrasive blasting applications requiring fast, precise, and clean surface treatment. Standard equipment 8 ceramic blasting nozzles 15 replaceable protective visor films 2 industrial blasting guns 2 pairs of protective gloves integrated into the cabinet 2 cyclone dust extraction systems 2 pressure regulators 2 foot control systems Technical specifications – CORMAK 1200L cabinet sandblasting machine Parameter Specification Internal cabinet dimensions 1150 x 1260 x 800 mm External dimensions 1800 x 1400 x 1880 mm Operating pressure 4–8 bar Ndsdpfx Afjv Aad Ae Sob Capacity 1200 L Abrasive materials Corundum, glass abrasive, sand Weight 196 kg Note: The machine is supplied in a self-assembly version.

Condition: refurbished (used), Year of construction: 2000, table length: 1,000 mm, table width: 1,000 mm, operating pressure: 3,800 bar, (Pictures in current state) - prepared for two cutting heads (1x pure water) - Control unit will be renewed Nodpfx Afjnab Rlo Sedb - will be sandblasted and repainted - Pump optionally available - available after order in 12-16 weeks Special features: - max. two cutting heads per Z-axis - Can be individually adapted to customer requirements - 12 months or 2,000 hours warranty (not on spare and wear parts) We offer a discount when concluding a maintenance or service contract! Contact us and we will make you a customized offer!

Condition: used, Year of construction: 2003, functionality: fully functional, type of input current: three-phase, overall weight: 1,100 kg, input voltage: 400 V, total width: 1,650 mm, total length: 2,000 mm, total height: 4,000 mm, filter area: 140 m², suction capacity: 3,800 m³/h, negative pressure: 3,500 Pa, Dust extraction unit, fume extraction for welding, self-cleaning filter, suitable for plasma cutting, laser cutting, sandblasting, shot blasting, and all types of dry dust. The filter is pneumatically cleaned with compressed air pulses during operation, resulting in high device efficiency. The fan is located on the clean air side, minimizing the risk of explosion. Year of manufacture: 2003 Motor power: 7.5 kW Ndsdszlzv Ijpfx Af Ssb Capacity: 3800 m3/h Inlet diameter: 280 mm Filter cartridges: 9 pcs. Filtration area: 140 m2 Fire damper Noise silencer Dimensions: Height: 4.00 m Width: 1.65 m Depth: 2.00 m Base: 1.33 m x 1.84 m Stock number: 1148

Condition: used, Year of construction: 2003, functionality: fully functional, type of input current: three-phase, overall weight: 620 kg, filter area: 60 m², suction capacity: 5,000 m³/h, negative pressure: 2,500 Pa, Dust extraction unit, fume extraction unit for welding, self-cleaning cartridge filter, pneumatic, vacuum-based system for plasma cutting, laser cutting, sandblasting, soda blasting, shot blasting, and for all types of dry dust. Kemper System 8000 The filter is pneumatically cleaned with pulses of compressed air during operation, ensuring high device efficiency. The fan is located on the clean air side, minimizing the risk of explosion. Year of manufacture: 2003 Fans with a power of 5.5 kW. Flow rate: 5000 m3/h Vacuum: 2500 Pa Filtration area: 60 m2 Ndjdpszil Ivjfx Af Seb Stock number: 1147

Condition: used, Year of construction: 2009, functionality: fully functional, total width: 4,300 mm, total length: 3,700 mm, total height: 3,000 mm, Description For sale is a Tonello Laser Blaze 250 industrial laser finishing system, offered as a complete enclosed workstation. This high-performance system is specifically designed for laser-based garment finishing, enabling precise and repeatable effects such as denim fading, whiskering, engraving, and decorative surface treatments. The Laser Blaze series by Tonello S.r.l. is widely recognized in industrial denim production, offering a modern and sustainable alternative to traditional manual processes. The system utilizes a Rofin CO₂ laser source, known for its precision, stability, and reliability in continuous production environments. This unit replaces labor-intensive finishing methods such as hand-scraping, sandblasting, and chemical spraying, significantly improving consistency, efficiency, and environmental impact. The machine has been used in a professional garment factory environment and has been tested in operation with video documentation (March 2026). Recently serviced on 27.02.2026. Includes • Tonello Laser Blaze 250 enclosed laser cabin • Integrated laser processing unit • Computer workstation with control system • Electrical cabinets • Cooling unit (MTA) • Ventilation / exhaust connections • Operator control panel and integrated safety system Technical Details • Manufacturer: Tonello S.r.l., Italy • Model: Laser Blaze 250 • Laser source: Rofin CO₂ • Year: 2009 • Power: approx. 30 kW system • Voltage: 400V, 3-phase • Work area: approx. up to 150 × 150 cm • Application: Denim laser finishing and garment treatment Key Features • High-precision CO₂ laser technology for consistent results • Advanced control via Tonello CREA software • Capability for both flat and 3D (mannequin-based) processing • 360° garment effects without flat-pattern limitations • Double-position workflow for improved productivity • Fully enclosed workstation with integrated safety systems Technical Capabilities • Denim distressing (whiskers, chevrons, worn effects) • Laser engraving of logos, graphics, and textures Nsdpfx Aey Ai Ehof Ssdb • Photorealistic surface patterning • Multi-material capability (denim, leather, technical textiles) • High repeatability – identical results from first to last garment Sustainability Benefits • Eliminates need for sandblasting and manual abrasion • Reduces water and chemical consumption significantly • Lower energy usage compared to traditional laundry processes • Improves worker safety and production cleanliness Condition Used industrial condition. Machine is complete and was operational prior to factory shutdown. Tested and video recorded in operation (05–06.03.2026). Recently serviced (27.02.2026). Typical signs of use from production environment. Inspection possible prior to dismantling. Sold as-is, where-is, without warranty. Typical Applications • Denim laser fading and whiskering • Garment engraving and marking • Decorative textile finishing • Replacement for manual sandblasting processes Location: Valga, Estonia Removal & transport: Buyer responsible for dismantling, loading, and transport. Professional dismantling strongly recommended due to system size and complexity.

Condition: used, functionality: fully functional, In this listing, you are purchasing a second-hand “Canon imagePROGRAF GP-4000” large-format printer Item for sale: 1 x Canon imagePROGRAF GP-4000 with the following specifications: incl. roll unit incl. roll holder set incl. WT36-600 Not the right configuration? We can easily configure the machine to your requirements. Please feel free to contact us! Condition: This listing is for a second-hand machine, which may show signs of wear (minor scratches or discolouration). The unit has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the unit during our business hours. Please arrange an appointment to do so! Seaworthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly. Nodpoz Et T Njfx Af Sjdb

Condition: like new (used), Year of construction: 2021, functionality: fully functional, load capacity: 30 kg, arm reach: 650 mm, pivoting range: 360 °, teach pendant manufacturer: Fanuc, Fanuc SR6IA-30P-C-CENR Robot complete with Controller. 8+ units available from October 2026 Robots were installed in an IMA line that was created for a special project but never commissioned. So even though the robots have been installed in the line, they were never commissioned prior to the special project being terminated. Lines are still in their original crate from IMA. FANUC SR-6iA - Type: SCARA - Axes: 4 — J1, J2, J3, J4 - Payload: 6 kg - Horizontal reach: 650 mm - J3 vertical stroke: 210 mm - J1 range: ±148° - J2 range: ±150° Nodpfx Aszzplcef Sodb - J4: ±360° - Repeatability: approximately ±0.01 mm for J1/J2/J3 - Robot weight: 30 kg - Typical applications: pick & place, assembly, inspection and packaging - Controller: R-30iB Plus for the current configuration.

Condition: new, Year of construction: 2026, -Smart Safety Clean Air Enhanced Efficiency. Ndsdpfx Aovg U Dxof Sob -Elevate your workplace safety with the TFON Airwet Series — a state-of-the-art wet-type air suction system engineered to eliminate sparks and dust produced during deburring processes. The Airwet Series significantly reduces the risk of fire and explosion, protecting both your workforce and your facility. -Fire & Explosion Prevention: Effectively minimizes hazardous particles and ignition sources right at the source. -Enhanced Air Quality: Captures and removes airborne contaminants, creating a cleaner and healthier work environment. Seamless Integration: Compact, space-saving design allows for easy installation into existing machinery and workflows. Increased Safety & Regulatory Compliance: Supports compliance with occupational health and safety standards, boosting overall operational safety...

Condition: refurbished (used), Year of construction: 1999, - two cutting heads Ndsdpfonab Siex Af Sob - control unit is renewed - will be sandblasted and repainted - Pump optionally available - available in 12-16 weeks after order Special features - individually customizable to customer requirements - 12 months or 2,000 hours warranty (not on spare and wear parts) We offer a discount when concluding a maintenance or service contract! Contact us and we will make you a customized offer!

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Fanuc M Series Robot Unit Complete - Type: M1IA0.5A-30P-O-CE..+ Ndedpfezzpuwex Af Ssb The M-1𝑖A/0.5A is a high-speed, 6-axis Delta robot, ideal for compact, high-speed order picking and assembly applications. With a payload of 0.5 kg and a work envelope of up to 280 mm, this robot is perfect for small parts handling processes requiring high versatility in industries such as electronics, precision engineering, food, medical and pharmaceutical. Its unique delta design mechanism is ideal for fast, dexterous assembly applications. It can also easily cover an additional range of applications by simply adding another optional 500 g of payload. - Robot: M-1iA/0.5A - Robot type: Delta / parallel robot - Axes: 6 - Standard payload: 0.5 kg - Optional payload: up to 1 kg - Reach: 280 mm - Repeatability: ±0.02 mm - Weight: FANUC lists the mechanical unit itself at around 17 kg in some documentation. - Mounting: floor, ceiling/inverted or angled - Protection: IP20 - Typical controller: R-30iB Plus / R-30iB Mate Plus depending on configuration.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 37,000 h, controller model: Siemens Sinumerik 840 D, laser power: 3,200 W, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 115 mm, TECHNICAL DETAILS Laser power: 3,200 watts Travel range, X-axis: 2,500 mm Travel range, Y-axis: 1,250 mm Travel range, Z-axis: 115 mm Sheet thickness, structural steel max.: approx. 20 mm Sheet thickness, stainless steel max.: approx. 15 mm Ndjdpfez A D Irox Af Sob Sheet thickness, aluminum max.: approx. 8 mm MACHINE DETAILS Control system: Siemens Sinumerik 840 D Total connected load approx.: 88 kVA Machine hours: 74,000 h Beam hours: 37,000 h Dimensions & Weight Footprint: 8,660 x 6,110 x 2,700 mm Machine weight: approx. 7,300 kg EQUIPMENT Closed machine frame with integrated laser unit Automatic pallet changer TFT color screen Positioning laser diode Spray device Motion unit for high-precision machining Additional high-dynamic Yp axis Drives with maintenance-free three-phase servomotors Closed beam guidance Conveyor for small parts and waste TRUMPF laser CO2 laser TruFlow 3200 High-frequency excitation Low-maintenance turbo radial blower Gas mixer (integrated) Laser power control Laser logbook function Laser cutting head with 5" lens Laser cutting head with 7.5" lens Universal quick-change device ControlLine Control system SINUMERIK 840D Automatic shut-off ContourLine SprintLine Teleservice Microweld RJ45 network connection Network connection via telediagnostics CE marking Light barriers Multi-chamber extraction system Compact dust collection system

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, We offer a new table blasting machine – high-quality Czech manufacture, with premium materials used in production. Model: TSM 360-1.5 - Rotating table diameter: 1,500 mm - Maximum blasting part height: 550 mm - Total machine height: 3,000 mm - Total machine width: 2,000 mm - Total machine depth: 1,600 mm - 1x throwing turbine – power: 7.5 kW – with frequency inverter The turbine supports both left and right rotation. - Bucket elevator – power: 1.1 kW - Table rotation – power: 1.1 kW – with frequency inverter Table rotation can be manually controlled via button. - Total machine power: 9.7 kW The machine features a frequency inverter for adjustable turbine speed. A major advantage is the ability to switch turbine direction between left and right rotation. Nedpow Nbycofx Af Sodb Blasting unit is CE-certified. Additional advantages include high blasting efficiency, quiet operation, low energy consumption, and minimal space requirements for installation. Within its category, this model stands out as a highly advanced table blasting machine due to its concept and design. (Blasting machine, sandblaster, shot blasting, blast cleaning, sand blasting, blasting equipment).

Year of construction: 2013, condition: used, functionality: fully functional, FOR SALE: WASTEWATER PRE-TREATMENT SYSTEM Due to the expansion and relocation of our winery, the wastewater pre-treatment system, belonging to the ÉSE series of Élinvest Kft., is now available for sale. The system operated flawlessly from 2013 to 2024 with regular maintenance. Technical specifications: Untreated raw wastewater enters an oversized sump below the filter unit, from where a transfer pump with a capacity of approximately 25 m³/h conveys it to the pre-filter unit. The system filters the technological wastewater generated during operation through a Ø1 mm filter screen within 10 minutes of its generation, in automatic mode. Solid materials larger than 1x1 mm are collected in a 240-liter, covered plastic container, while the water phase containing dissolved and suspended solids flows by gravity to a transfer well that also collects municipal wastewater. After the completion of the harvesting operations, the wastewater discharge rate decreases to 20-40% of the harvesting water flow. This water is usually acidic; therefore, the discharge pH can be adjusted by adding a solution of sodium hydroxide (20-30% concentration). A pH control unit, suitable for dispensing both acid and alkali, maintains the pH of the treated wastewater within the specified limits (5.5 and 10). Ndsdjz Eiigspfx Af Sjb The operation and control are performed by a pH probe and a custom electrical control panel. The rotating drum of the filter unit is cleaned with a rotating brush and an intermittently operating pressure booster connected to a water supply with a minimum pressure of 4 bar. The construction technical approval number for the filter system is ÉME É-61-2011. The average wastewater discharge is 3-10 m³/day. The maximum instantaneous wastewater flow is 10 m³/h, and 25 m³/h in case of an emergency.

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 950 mm, total length: 600 mm, total height: 1,850 mm, air demand: 0.9 m³/h, tank capacity: 250 l, input voltage: 230 V, overall weight: 180 kg, Equipment: cabin, lighting, XTON SANDBLASTER™ is a premium sandblasting and bead-blasting machine, ideal for workshops with limited workspace. The 250-liter pressure blast cabinet operates in a closed-circuit system and features a unique filtration system with an integrated dust collector. It is designed for exceptionally quiet operation, enhancing user comfort. Nodpfxjrl R Dlj Af Sedb The device is equipped with high-quality grain leather gloves, which are resistant to mechanical damage. The machine can also be painted in any color from the RAL palette. Additionally, an option is available for the unit to be made of stainless steel. EQUIPMENT: - Worktable measuring 80 x 55 x 60 cm - 250-liter chamber - LED lighting - High-quality gloves TECHNICAL SPECIFICATION: - Weight: 180 kg - External dimensions (W x D x H): 95 x 60 x 185 cm - Chamber dimensions (W x D x H): 88 x 55 x 60 cm - Chamber capacity: 250 L - Power supply voltage: 230 V / 50 Hz - Nominal working pressure: up to 10 bar - Cleaning efficiency: 25 m³/h - Cleaning grade: SA-3.0 – extensive and deep corrosion removal - Air requirement: 900 L/min - Maximum airflow: up to 12,500 L/min - Supported nozzle diameters: 2-15 mm - Nozzle material: tungsten carbide - Abrasive valve: MIKRO II - Viewing window dimensions: 270 x 510 mm - Worktable load capacity: up to 200 kg - Operating temperature: 10 - 50 °C - Construction: powder-coated steel, optional stainless steel

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 12 276 / REV 13 976, power: 30 kW (40.79 HP), overpressure (max.): 0.5 bar, tank capacity: 110 l, No minimum price – guaranteed sale to the highest bidder! The distillation unit underwent an overhaul in 2024. TECHNICAL DETAILS Capacity: 110 l Water jacket volume: 180 l Operating overpressure: 0.5 bar Heating method: Electric heating elements MACHINE DETAILS Machine type: Column still with water jacket Ndsdpfxozzmk Ao Af Sob Power: 30 kW

Condition: new, ⭐⭐⭐⭐⭐ (5.0) 27 Reviews ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Great Support! ✈️ Free Shipping: 10-day delivery ✈️ ✅✅✅ Energy Efficiency Class A+++ ✅✅✅ PLUS VAT & SHIPPING* ►►Buy Now◄◄ ✨Sandblasting Set with Tank✨ ⭕ Sandblasting outdoors, sandblasting indoors, used in mobile sandblasting machines with compressed air. ⭕ Njdpfx Afjfvqixo Sodb Pressure Sandblasting Tank Pressure Sandblasting Tank - Technical Data ✔ Working pressure: 7 bar ✔ Abrasive type: Steel grit, steel shot, garnet, glass beads (glass sand), etc. ✔ Air consumption: L/min, see table below. ❓What is a Pressure Sandblasting Tank❓ ✨ A pressure sandblasting machine is a type of sandblasting equipment that can be used as a mobile unit wherever it is used outdoors to sandblast surfaces that cannot be transported (buildings, large steel structures, etc.). In addition, sandblasting booths can be used to sandblast large parts. Since it operates with air pressure, it also requires a compressor. ✨ As Proton, we have standard sandblasting tanks with 50 l, 100 l, and 200 l. In addition, we can supply various sizes of blasting tanks depending on the need. ✨ All spare parts and equipment are available in our company. We offer sandblasting masks, sandblasting gloves, sandblasting hoses, and boron carbide sandblasting nozzles, which are necessary to ensure that the sandblasting worker is not affected by the environment. ⚡️Areas of Application for the Sandblasting Tank⚡️ To achieve the required surface roughness before painting and coating, this system is used in areas where cleaning and decorative finishing are desired. The main applications are in the shipbuilding industry, foundry industry, automotive, marble, textile, glass, pipe, manufacturing, and assembly industries. ✳️Standard Blasting Tank Sets come with the following equipment.✳️ SANDBLASTING TANK 200 L ►1 pc. Sandblasting control valve ►1 pc. Remote control valve ►1 pc. Quick silencer ►1 pc. Water separator regulator ►1 pc. Remote control handle ►1 pc. Sandblasting flow diverter "Y" connector ►1 set of quick coupling ►20 meters of sandblasting hose ►40 meters of pneumatic double hose ►1 pc. 8 mm Venturi nozzle ►1 pc. 39 mm nozzle holder (MHE-1) ►1 pc. Sandblasting mask ►1 Overall ►1 Pair of gloves ►1 pc. Sandblasting bag ►1 pc. Air stand with 2 outlets ►20 m breathing air hose and connectors ❗❗❗ Compressor requirements for sandblasting tanks Engine power: 37 kW - 50 hp, Air flow: 6.25 m3/min, 7-8 bar pressure, a compressor with the required characteristics is required. It is recommended that the compressor be a screw compressor. ❗❗❗

Condition: good (used), functionality: fully functional, machine/vehicle number: 310579, overall weight: 80 kg, heating capacity: 10.2 kW (13.87 HP), input frequency: 50 Hz, input voltage: 400 V, input current: 16 A, Type: P160/9/SG51/1K/RT45 Power: 10.2 kW Max. operating temperature: 160 °C Medium: water Temperature control unit Ndedpfx Afsz Dxg Se Sob

Condition: good (used), Horizon ED-40 Standing Delivery Unit Manufactured by Horizon, Japan. Can be connected to any Horizon folding machine, but also works with Heidelberg, Herzog Heymann, MBO, etc. The device also operates independently of the folding machine. Infinitely variable delivery speed adjustment. Ndjdpfszurzasx Af Ssb Height adjustment. Package counter with shifter. Format: min 20mm max 110mm

Condition: used, mileage: 774,000 km, power: 375 kW (509.86 HP), first registration: 09/2017, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2017, Equipment: ABS, air conditioning, electronic stability program (ESP), VOLVO FH 500 – STAND-ALONE A/C – VEB – FULL EQUIPMENT – 2 SLEEPER BERTHS VEHICLE HISTORY * FROM 1ST OWNER * GERMAN VEHICLE * IMMEDIATELY AVAILABLE * VIDEO AND PHOTOS AVAILABLE VIA WHATSAPP * INTERNAL NO.: ECC 175 VEHICLE EQUIPMENT * GLOBETROTTER CAB * STAND-ALONE A/C * AUTOMATIC CLIMATE CONTROL * LANE DEPARTURE WARNING (LDW) * EMERGENCY BRAKING ASSIST * ADAPTIVE CRUISE CONTROL (ACC) Ndjdpfoz Exfdex Af Sob * NAVIGATION * CAMERA * VOLVO DYNAMIC STEERING * AIR-SUSPENDED DRIVER'S SEAT * MULTIFUNCTIONAL STEERING WHEEL * BLUETOOTH * HANDS-FREE SYSTEM * RADIO / USB * ELECTRIC WINDOWS * ELECTRIC MIRRORS * DIFFERENTIAL LOCK * OFF-ROAD PROGRAM * HEADLIGHT CLEANING SYSTEM * AIR SUSPENSION (REAR) * 2 BEDS * REFRIGERATOR EXPORT / NOTE EXPORT SALES ONLY WITH A DEPOSIT OF MIN. 500 € - 2,000 € EXPORT SALES ONLY WITH DEPOSIT MIN. 500 € - 2,000 € EXPORT REGISTRATION EXW POSSIBLE WITHIN 10 MINUTES (APPROVED EXPORTER). VEHICLE RESERVATIONS SHOULD ONLY BE MADE IN WRITING. VERBAL AGREEMENTS ARE NON-BINDING. SUBJECT TO CHANGES, ERRORS AND PRIOR SALE. LEGAL INFORMATION THIS ADVERTISEMENT DOES NOT CONSTITUTE A BINDING OFFER IN ACCORDANCE WITH SECTION 145 OF THE GERMAN CIVIL CODE (BGB). IT SERVES SOLELY AS A BASIS FOR CONTRACT NEGOTIATIONS. ALL INFORMATION IS PROVIDED WITHOUT GUARANTEE. NO GUARANTEED CHARACTERISTICS. SALE IS EXCLUSIVELY GOVERNED BY OUR GENERAL TERMS AND CONDITIONS.

Condition: new, Pro Sandblaster for Industry Pressure Unit SAPI Mammut Sandblasters with QUICK STOP™ System The SAPI Mammut sandblasters with the QUICK STOP™ system are powerful industrial sandblasting machines, designed for use in industries such as automotive, construction, and manufacturing. These machines ensure fast and efficient surface preparation, cleaning, and treatment of metal, concrete, and other materials. QUICK STOP™ – Safety & Protection The SAPI QUICK STOP™ system is a safety feature designed to prevent accidents and protect the machine from damage. It works by immediately stopping the blasting process as soon as the operator releases the control handle. This instantly cuts off the abrasive flow, preventing potential hazards and protecting the equipment from overuse-related damage. Efficiency & Durability The QUICK STOP™ system reduces air and fuel consumption, making the sandblasting process more efficient and cost-effective. The Mammut sandblasting machine is built for durability, featuring high-quality components that ensure consistent performance, even in harsh conditions. All our machines are fully CE- and TÜV-certified. Flexibility & Versatility The machine is available in different sizes to meet various sandblasting needs. It is compatible with a wide range of abrasive materials, from standard sand to specialized plastic or metallic media. The Mammut with QUICK STOP™ can be used for surface preparation, cleaning, and removing rust, paint, and coatings. Njdpfxeupyw Es Af Sjdb Precision & User-Friendliness The Mammut with QUICK STOP™ allows for precise pressure control and adjustment during operation, ensuring consistent results and high accuracy. Additionally, inspection and maintenance access points are designed for easy upkeep. Maximum Safety The QUICK STOP™ system with a dead man’s switch ensures maximum safety during operation. It also prevents moisture buildup inside the machine, as pressure remains constant even when blasting stops—a major advantage over standard on/off blasting systems. Fully Equipped from the Start All Mammut sandblasters with QUICK STOP™ come fully equipped. Our standard package includes: ✔ Sandblasting hose ✔ Nozzle ✔ Pressure control valve ✔ Water separator ✔ Abrasive dosing valve ✔ Basic personal protective equipment

Year of construction: 2019, condition: good (used), Dust extraction,welding fume extractor,cartridge filter self-cleaning,pneumatic,vacuum for plasma,laser,sandblasting,sodding,blasting and all kinds of dry dust. Brand: TEKA / Bystronic Model: Filtercube 4H / FilterBys Version 2 Year of manufacture: 2019 Filter cleaned by microprocessor controller with compressed air pulses during operation thus high efficiency of the device. Low compressed air demand thanks to the system "Power-Spray" The Filtercube central filter unit equipped with cartridge filters is the ideal solution for almost all problems in the area of smoke and dust filtration. Fan on the clean side which reduces the risk of explosion to a minimum. Application: central extraction system for multiple welding stations extraction system for welding robots extraction system for thermal cutting and grinding tables Ndsdpfx Asnyhvqof Ssb system for general hall filtering (push-pull system, displacement system) extraction system in combination with an extraction table extraction system for grinding of non-exploitable materials Parameters: 5.5 Kw fan Capacity 3800 m3/h Vacuum pressure 3250 Pa Inlet diameter : 250 mm Filtration area of 100 m2 Equipped with "DUST-VAC" unit , which automatically pumps the dust into a separate tank. Possibility to order new filter cartridges tailored to the customer's needs Technical documentation included.

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, Format panel saw, milling machine, combination machine, table saw, circular saw, joiner’s circular saw, format saw, panel saw, table milling machine, tilting spindle milling machine FELDER Type: KF7 Year of manufacture: 1996 Format sliding table 300 cm Manual height adjustment of the saw blade Manual tilting of the saw blade up to 45° Nodoz Eft Ijpfx Af Ssdb Parallel fence with fine adjustment up to approx. 125 cm Extension table with telescopic extension arm Rip fence extendable up to approx. 320 cm, adjustable for miter cuts with degree scale system Parallelogram protective device with upper extraction hood Motor power saw motor 3 KW Tilting spindle milling machine Manual height adjustment of the tilting spindle Manual tilting of the milling spindle up to 45° backwards Milling spindle diameter 30 mm 3 speeds adjustable via belt Milling spindle can be lowered and removed under the table Motor power milling unit 3 KW Milling fence with fine adjustment Folding device for feed A prior inspection is highly recommended; simply leave your phone number in an email, and I will contact you to arrange an inspection appointment. Subject to prior sale. All information without guarantee. The machines can be picked up by the buyer or shipped via a freight forwarder at the buyer's expense. Loading or packaging can be organized by us. The shipping costs are an estimate; they may vary depending on the distance and unloading options; please inquire. The offered item is offered with differential taxation. The stated selling price is the gross final price. An invoice with VAT breakdown will not be issued. You will receive an invoice in accordance with §25 UStG. Warranty basis: Due to age and wear, the sale is exclusively to commercial customers without any warranty, guarantee, or right of return. All information without guarantee. The buyer acknowledges this by submitting their bid. If the offered item is a used item, the warranty period is 12 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as an entrepreneur within the meaning of §14 BGB, any warranty is excluded. If the offered item is a new item, the warranty period is 24 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as an entrepreneur within the meaning of §14 BGB, the warranty period is 12 months.

Condition: new, Year of construction: 2026, CORMAK 10 bar Diesel Compressor is a modern, fully independent source of compressed air, designed for professionals who require maximum performance and mobility in the field – wherever access to a fixed electrical power supply is unavailable. The unit combines advanced engineering, European manufacturing precision, and innovative design solutions to ensure reliable operation even under the most demanding working conditions. KEY ADVANTAGES AND FEATURES 10 bar operating pressure: Optimal pressure parameters ensure a stable supply for a wide range of pneumatic tools, construction machinery, sandblasting equipment, and drilling machines. Full mobility on its own wheels: A robust running gear mounted on heavy-duty wheels allows for easy transportation and effortless movement of the compressor directly to the work site. Third jockey wheel on the drawbar: The additional swivelling wheel mounted on the drawbar significantly facilitates precise positioning and manoeuvring of the compressor on construction sites or in confined working areas. Four independent levelling jacks: Allow the machine to be perfectly levelled, even on uneven or difficult construction terrain. Opening housing panels with gas-oil struts: Provide quick and wide access to all service components, ensuring convenient maintenance and periodic inspections. Built-in brake: Enhances safety during transportation and when the unit is parked on slopes. TECHNOLOGY AND PERFORMANCE CORMAK diesel compressors are designed using high-quality components, resulting in a long service life and low operating costs: High-performance screw air end: The heart of the compressor ensures high effective output, continuous operation, and resistance to intensive use in industrial environments. Sound-insulated and durable enclosure: The robust construction with sound-insulating panels effectively reduces noise levels, improving operator comfort and minimising the impact on the surrounding environment. Advanced cooling system: A specially designed cooler combined with an efficient cooling system ensures optimal thermal conditions, even when operating under heavy loads and at high ambient temperatures. Intuitive control system: The electronic control panel enables full monitoring of key operating parameters, such as pressure and temperature, while facilitating diagnostics and maintenance planning. APPLICATIONS Construction and road construction: Powering pneumatic breakers, drills, wellpoint systems, and machines for plastering and spray painting. Service and field work: An indispensable source of compressed air wherever a 400 V mains power supply is unavailable. Heavy industry and installation work: Rapid support for production and installation processes in the field. TECHNICAL SPECIFICATIONS Parameter Specification Power 42.4 kW Air delivery 5,100 l/min Operating pressure 10 bar Drive transmission Direct drive Nedpszxzchofx Af Sodb Compressor cooling system Air/oil Oil capacity 45 L Air outlet valves 3 pcs. Battery 12 V DC – 790 A – 115 Ah Fuel tank capacity 44 L DIESEL ENGINE Parameter Specification System 4-stroke Displacement 2,615 cc Number of cylinders 4 Rated power at 2,000 rpm 42.4 kW Cooling system Air Lubrication system Oil Lubrication system capacity 10.2 L