Used Scheer Fm 19 for sale (6,930)

Condition: like new (used), functionality: fully functional, Stringer milling device SCHEER TW 4 + Router HM 16 Everything is in excellent, like-new optical and technical condition, the device has been used very little. Fully functional—ready to use immediately. All machines are intended for commercial use, no DIY store scrap. Treppenwangenfräsgerät SCHEER TW 4 With this device, you can mill treads and risers very precisely and accurately. The hand crank even allows you to machine curved joint surfaces; you can also use it for recesses in other panel materials, such as worktops. Equipped with hardened guide rods, on which the cross support with router is mounted. Featuring ball bearing guide bushings, allowing the device to move very easily, accurately, and safely. The device can be clamped securely onto the stringer or similar workpieces using four screw clamps. The cross support has two stops each in both the longitudinal and transverse directions. Comes with two positioning angles. Complete with manual, tooling, and all accessories. Longitudinal milling travel: 750 mm; transverse milling travel has been increased from 75 mm to 320 mm, significantly expanding the machine's application range. To increase the milling travel, a new base frame made of aluminum profiles was manufactured. The modification work was carried out by a reputable engineering company. Everything works perfectly; this machine is a true one-off. Router SCHEER HM 16 Very good condition, with only minor signs of use. Very robust, thanks to triple-bearing router spindle. Accurate concentricity and flawless milling results. Precise column guidance and torsion-resistant milling table. Constant speed, even under heavy load. Equipped with high-performance motor (shows almost no signs of fatigue). Long service life thanks to soft start (full-wave electronics). Bearings are in good condition. The machine is suitable for the toughest continuous milling operations. Good visibility of the milling spindle; chips are blown away by a powerful fan. 220V, 1800W. Isdpfxoyxr T Tj Aquoic Speed: 18,000 rpm. Fully functional. With M16 female thread mount.

Condition: excellent (used), Year of construction: 1986, Scheer circular cutting system Stable base frame Portal design allows workpiece to pass through Fully automatic control with skip function Iodpfx Asyy St Ajqusic Height-adjustable drilling unit Cutting diameter: Min: 70 mm Max: 305 mm Depth: Max. 40 mm Up to 2 panels per cut Central bore: 7–10 mm Possible center bore: 15–35 mm Drill motor BM 602 Machine cycle times: Beech: diameter 220 mm, depth 40 mm – 40 sec Plywood: diameter 220 mm, depth 40 mm – 20 sec Chipboard: diameter 350 mm, with bore D: 35 mm – 30 sec Location: ex stock 54634 Bitburg - immediately available -

Condition: like new (used), functionality: fully functional, Dowel Hole Drilling and Inserting Machine SCHEER BS 5102-V The BS 5102-V is a powerful, electronically controlled machine designed for precise and efficient face-end drilling and accurate insertion of wooden dowels. It is ideally suited for industrial wood processing—especially in furniture and carcass production. Condition & Service: Condition: As new (completely overhauled & newly painted) Functionality: Fully operational Warranty: 12 months CE compliant / Dust-tested Main Technical Data & Features: Workpiece width: min. 60 mm / max. 1200 mm (Pendulum operation: max. 600 mm) Workpiece thickness: 15 – 60 mm Drilling depth: max. 45 mm Vertical stroke of the support: 7.5 – 50 mm Min. lateral drilling distance: 10 mm Drilling unit: 9,000 – 18,000 rpm (adjustable), 1.5 kW Drilling system: M10 external (Scheer system) Servo motor: 0.54 kW, max. 60 m/min feed rate Dowel size: 8 x 30 / 8 x 50 mm, DIN 68150 Form A Glue system: 1:1 diaphragm pump, max. 7 bar Glue container: spiral conveyor, 3.5 liter capacity Extraction connection: Ø 80 mm | Extraction airflow: 540 m³/h at 30 m/s Clamping cylinders: 4 short-stroke cylinders (Ø 63 mm), angular clamping Power supply: 400 V, 50 Hz Machine Construction & Operator Comfort: Controlled X-axis with machine frame as workpiece support X-support with linear guide and rack-and-pinion drive Servo drive for feed system Clamping portal with 4 adjustable clamping cylinders—controllable in 2 groups Stop rulers: left, right, and center on the table Drilling depth and dowel projection are adjustable directly on the support Offcut Unit & Safety Systems: Safety hood locking Lamella safety curtain Integrated extraction channels Control & Operation: PC with Siemens PLC controller Iijdpfxounvg Te Aqusc User interface: WP-Studio—dialog-oriented programming Operating system: Windows 10 Display: 17" color monitor Separate workpiece programs for left & right operating sides (mirrored possible) Glue quantity can be individually defined per program Network capable (LAN/WLAN), compatible with Windows, Linux, Mac, Novell Remote maintenance & software updates possible Optional Equipment: Y-axis: automatic adjustment of drilling and glue units Electronic glue monitoring: ensures controlled glue flow Additional drilling unit for surface-side drilling: • Drilling motor: 1.5 kW at 18,000 rpm • Drill feed: pneumatic • Drill stroke: max. 25 mm • Depth limit: via spindle & SIKO display • Drill distance from reference edge: 5 – 35 mm • Holder: M10 external, max. Ø 35 mm • Workpiece length: min. 70 / 90 mm Warranty & Reliability: We are convinced of the stability and manufacturing quality of our machines—that’s why you receive a 7-year warranty on the machine construction, especially on the supporting structure and guide mechanism. Excluded are electrical supply components as well as normal wear parts. Additionally, we provide a 1-year warranty on the complete machine (including control, hydraulics, pneumatics, etc.). Conclusion: This machine combines state-of-the-art control technology, high manufacturing quality, and user-friendly operation. Ideal for precise dowel hole drilling and automated dowel insertion—reliable and efficient for continuous operation. 📞 Contact us for an individual offer or to schedule a demonstration. Available from stock. Delivery, commissioning, and training available as options.

Condition: like new (used), This used SCHEER DB 4 universal dowel boring machine has been functionally tested, worn parts have been replaced and the machine geometry has been readjusted to ensure maximum precision. The SCHEER DB 4 universal dowel hole drilling machine is specially designed for drilling construction holes, for drilling holes in rows in a 32 mm grid system and for drilling a wide variety of fittings; it enables all these tasks to be carried out quickly, precisely and without long set-up times. Extremely simple operation via symbols and 4 program preselection controls for changing over to the new work process in seconds. Central adjustment of the removable side stops, therefore always flush at the front edge, precise drilling of left and right workpieces. It does not matter whether the parts are cut to size or at the correct angle. The doweled corner joint is always flush, both on the edge and on the surface! No CNC machine can achieve this as easily and quickly as a SCHEER DB 4. Safety clamping device across the entire table width, clamping of the workpieces directly on the drilling beam. Stop rail with three adjustable folding stops. Continuous table supports make it easier to push through and drill long workpieces, fold-up workpiece support tables facilitate line drilling and hardware drilling. 2 drilling units Drill motor type BM 602-230/400 Volt, 50 Hz, n= 2860, 2.2 kW output 25-spindle attachment gearbox Spindle pitch 32 mm (other spindle pitches on request) For surface and face drilling. The vertical drilling unit is equipped with an oil brake for tear-free drilling through rows of holes. The control cabinet of the machine has been completely rebuilt and converted to the new SIEMENS LOGO CONTROL. This ensures the operational safety of the machine for the future! Gantry passage: max. 950 mm Iiodpfx Aqeu Rqi Ajuec Working length: max. 2360 mm

Condition: excellent (used), 25 vertical drills 25 horizontal drills Iiodpfx Aqey S Awcousc 2.2 kW upper motor 2.2 kW lower motor 100 cm ground clearance

Condition: like new (used), mileage: 190,000 km, Year of construction: 2023, FORD F-MAX 500 Year 2023, ADR, 190,000 km, automatic transmission, retarder, dual fuel tanks, spoiler, side fairings, 70% tyres, double bed, fridge, national vehicle, still under Ford warranty, leasing available on site. Iedpfjylvdzjx Aqujic

Condition: excellent (used), functionality: fully functional, Kitchen Worktop Router FG 314-2 - with overhead router HM / 18 Scheer - Milling length: 900 mm - Milling depth: 0–90 mm - Complete with template Iisdpfx Aqsx R Efgeujc - Weight approx. 21 kg - 2000 watts - 7 kg - Speed: 10,000 – 18,000 rpm Transport available at additional cost! Due to the age of the used machine, warranty is excluded when selling to commercial customers.

Condition: refurbished (used), battery capacity: 750 Ah, battery voltage: 48 V, total height: 650 mm, total length: 984 mm, total width: 630 mm, Tested forklift battery for your truck – 48V 6PZS 750AH – Special tray Ijdpfoy Rnt Hjx Aquoic + 1 year warranty + Includes Aquamatik battery watering system + Includes terminal discharge cable & REMA 320 plug (other connectors can be installed upon request) + Capacity: at least 90-100% (C5 capacity test protocol included upon delivery) + Year of manufacture: 2024 Dimensions: Length: 984 mm Width: 630 mm Height: 650 mm Weight: approx. 1,050 kg Suitable for the following models and more: Still FM 20 Jungheinrich EFG 220 Jungheinrich EFG 316 Jungheinrich EFG 318 Jungheinrich EFG 320 Jungheinrich EFX 413 Jungheinrich EKX 410 Jungheinrich ESE 533 Toyota 8FBE16T Toyota 8FBE18 Toyota 8FBE18T Toyota 8FBMT16 Toyota 8FBMT18 Toyota 8FBMT20 Crown SCT 60 Atlet EF 180 Atlet EF 200 Atlet ET 180 Atlet ET 200 Atlet UHS Baumann EX 25-40 Caterpillar EP-FB18 Caterpillar EP-FB20 Caterpillar EP16 Caterpillar EP16/18PNT Caterpillar EP18 Caterpillar EP18/20 Caterpillar EP18/20KT Caterpillar EP18/20NT Caterpillar EP18KT Caterpillar EP18PNT Caterpillar EP20 Caterpillar EP20KT Caterpillar EP20PN Caterpillar EP20PNT Caterpillar F35 Daewoo B16 X Daewoo B16 X-5 Daewoo B18 T Daewoo B20 T Doosan B16X Doosan B16X-7 Doosan B18-5 Doosan B18T-7 Doosan B18T-AC Doosan B18X-5 Doosan B20T-7 Doosan B20T-AC Doosan B20T/X Doosan B20X-7 Doosan BT18T Doosan BT18T-5 Hyster H1.75XM Hyster J2.0XMT Hyundai 18BT-9 Hyundai 20B-9 Hyundai 20BT-7 Komatsu FB18 Komatsu FB20 Mitsubishi FB16 Mitsubishi FB16PNT Mitsubishi FB18KT Mitsubishi FB20KC Mitsubishi FB20KT Mitsubishi FB20NT Mitsubishi FB20PNT Nichiyu FB20P-60BC Nissan G1N1 Nissan G1N1L18 Nissan G1N1L18Q Nissan G1N1L18U Nissan GN01L18U Nissan GN1L16U Nissan TX16 Nissan TX18L Nissan TX20 Nissan TX20L Nissan TX4-18 Steinbock-Boss KE 20 UniCarriers TX4-20 Utilev UT20PTE Yale ERC 18 Yale ERC 20 Yale ERP 16 ATF Yale ERP 18 Yale ERP 18 ATF Yale ERP 20 Yale ERP 20 ATF Common battery sizes available, feel free to inquire. Transport available.

Condition: refurbished (used), battery capacity: 930 Ah, battery voltage: 48 V, total height: 770 mm, total length: 1,220 mm, total width: 500 mm, Tested forklift battery for your forklift - 48V 6PZS 930Ah - DIN C + 1 year warranty + includes Aquamatic filling system + includes end discharge cables & REMA 320 plug (other plug types can be installed upon request) + Capacity: min. 90-100% (C5 capacity protocol included upon delivery) + Year of manufacture: 2024 Dimensions: Length: 1,220 mm Width: 500 mm Height: 770 mm Weight: approx. 1,350 kg Compatible with the following models and others: Linde A (1250) - 5022-00 Linde A - 5224-00 Linde R 16 - 1120-00 Linde R 16 - 1120-00 - front battery change Linde R 16 HD - 1120-00 Linde R 16 HD - 1120-00 - front battery change Linde R 20 - 1120-00 Linde R 20 - 1120-00 - front battery change Linde R. 20 - 1122-00 Linde R 20 F - 8923-00 Linde R 20 F - 8923-00 - side battery change Linde R 20 G - 1120-00 Linde R 20 G - 1120-00 - front battery change Linde R 20 HD - 1120-00 Linde R 20 HD - 1120-00 - front battery change Linde R 20 W - 1120-00 Linde R 20 W - 1120-00 - front battery change Linde R 25 - 1120-00 Linde R 25 - 1120-00 - front battery change Linde R 25 F - 8922-00 Linde R 25 F - 8922-00 - side battery change Linde R 25 F - 8922-00 - vertical battery change Linde R 25 F - 8923-00 - side battery change Linde R 25 F - 8923-00 - vertical battery change Linde R 25 W - 1120-00 Linde R 25 W - 1120-00 - front battery change Still FM 20 Still FM-X 20 Still FM-X 25 Jungheinrich ETV 214 Jungheinrich ETV 320 Jungheinrich ETV 325 Jungheinrich ETV 460 Toyota/BT VR 1.25 Toyota/BT VRE 150 Crown ESR 4000-1.6 Crown ESR 4500-1.6 Crown ESR 4500-2.0 Crown ESR 5000 Crown ESR 5000 S Crown ESR 5260 Crown ESR 5280S-2.0 Atlet REACH TRUCK Atlet UHX 200 Caterpillar NR2042H Caterpillar NR20NH Caterpillar NR25N2X Hyster R2.0H Hyster R2.0HD Hyster R200HD Mitsubishi RB14-25 Mitsubishi RB20NH Yale MR 25 Ijdpfx Aqey Rntteujic Common battery sizes available on request. Transport available.

Condition: refurbished (used), battery capacity: 775 Ah, battery voltage: 48 V, total height: 784 mm, total length: 1,035 mm, total width: 533 mm, Tested forklift battery for your truck - 48V 5PZS 775Ah - DIN B + 1-year warranty + Includes Aquamatic system + Includes end discharge cables & REMA 320 plug (other plug types can be fitted upon request) + Capacity: min. 90-100% (C5 capacity protocol supplied with delivery) + Year of manufacture: 2024 Dimensions: Length 1,035 mm Width 533 mm Height 784 mm Weight: approx. 1,160 kg Suitable for the following models and more: Linde A (1120) - 5022-00 Iodpfx Aey Rnn Rsqujic Linde A - 5224-00 Linde E 16 - 386-00 Linde K - 5231-00 Linde K - 5231-00 - side battery change Linde K 10 Linde K 12 Linde R 14 N - 1120-00 Linde R 14 N - 1120-00 - front battery change Linde R 16 N - 1120-00 Linde R 16 N - 1120-00 - front battery change Linde R 16 N HD - 1120-00 - front battery change Linde R 20 N - 1120-00 Linde R 20 N - 1120-00 - front battery change Linde R 20 N - 113-00 Linde R 20 N - 113-00 - vertical battery change Linde R 20 SN - 115-08 - vertical battery change Still EK 11 Still FM-X 14 N Still MX 10 Still R 20-16 Still RX 20-18 Still RX 20-18 P Still RX 20-20 Still RX 20-20 PL Jungheinrich ETM 214 Jungheinrich ETM 216 Jungheinrich ETV Jungheinrich ETV C 16 Jungheinrich ETV Q 20 Crown ESR 5220-1.6 Caterpillar NOH10NH Caterpillar NR20NH Common battery sizes available - please enquire. Delivery possible.

Condition: refurbished (used), battery capacity: 625 Ah, battery voltage: 48 V, total height: 630 mm, total length: 1,025 mm, total width: 525 mm, Tested forklift battery for your truck – 48V 5PZS 625Ah – DIN B + 1 year warranty + incl. Aquamatik (automatic water filling system) + incl. end discharge connector & REMA 320 plug (other plug types available on request) + Capacity: min. 90–100% (C5 capacity report is provided upon delivery) + Year of manufacture: 2024 Dimensions: Length 1,025 mm Width 525 mm Height 630 mm Weight: approx. 890 kg Suitable for the following models and more: Still FM 20 Still R 20-15 Still RX 20-14 Still RX 20-15 Still RX 20-16 Still RX 20-18 Still RX 20-20 Still RX 20-20 P Jungheinrich EFG Heli CPD 18 Mitsubishi FB18KT Ijdpjy Rnmgsfx Aquoic Utilev UT20PFH Common battery sizes available, please enquire. Transport possible.

Condition: refurbished (used), battery capacity: 465 Ah, battery voltage: 48 V, total height: 778 mm, total length: 1,220 mm, total width: 273 mm, Tested forklift battery for your truck – 48V 3PZS 465Ah – special tray + 1-year warranty + Including aquamatic system + Including end discharge cable & REMA 320 connector (other plug types available on request) + Capacity: min. 90–100% (C5 capacity protocol included with delivery) + Year of manufacture: 2024 Dimensions: Length: 1,220 mm Width: 273 mm Height: 778 mm Weight: approx. 730 kg Suitable for the following models (and more): Iodpfsy Rnkxsx Aqusic Still FM-X 12 Still R 60-25 Jungheinrich ETM 214 Heli CPD 10 Heli CPD 15 Toyota 6FBRE14 Toyota 7FBRE16 Toyota 7FBRE16N Toyota/BT OME 100 H Toyota/BT OP 1000 SE Toyota/BT OPW 1200 HSE Toyota/BT RR-B 1 Toyota/BT RR-M 14 Toyota/BT RRE 140 Toyota/BT RRE 140 E Toyota/BT RRE 140 M Toyota/BT RRE 160 Toyota/BT RRE 160 M Crown ESR 5240 Caterpillar NR14N2 Cesab R112 Doosan B15NS Doosan B18NS Doosan B20NS Hubtex EASY Hyundai 16BRJ-9 Rocla HS14F Rocla TEF14 Rocla TEF25 Sichelschmidt 5929 Sichelschmidt M925 Sichelschmidt M930 Other common battery sizes available – please enquire. Delivery available.

Condition: refurbished (used), battery capacity: 620 Ah, battery voltage: 48 V, total height: 784 mm, total length: 1,035 mm, total width: 443 mm, Tested forklift battery for your forklift – 48V 4PZS 620Ah – DIN B + 1 year warranty + Includes Aquamatic system + Includes end discharge cables & REMA 320 connector (other connectors can be fitted on request) + Capacity: min. 90–100% (C5 capacity protocol will be provided upon delivery) + Year of delivery: 2024 Dimensions: Length: 1,035 mm Width: 443 mm Height: 784 mm Weight: approx. 960 kg Suitable for the following models and others: Linde A (1120) - 52-00 Linde K - 5231-00 Linde K - 5231-00 - side extraction Linde K 10 Linde K 10 - vertical extraction Linde K 12 Linde R 10 N - 1120-00 Linde R 10 N - 1120-00 - front extraction Linde R 12 N - 1120-00 Linde R 12 N - 1120-00 - front extraction Linde R 12 N - 136-00 Linde R 14 - 1120-00 Linde R 14 - 376-00 Linde R 14 N - 1120-00 - front extraction Linde R 14 N - 1120-00 - vertical extraction Linde R 14 S N ACTIVE - 115-12 Linde R 14 SN - 115-08 Linde R 14 SN - 115-08 - vertical extraction Linde R 16 AS 1140 - 1120-00 Linde R 16 N - 1120-00 Linde R 16 N - 1120-00 - front extraction Linde R 16 N - 113-00 Linde R 16 N - 115-00 Linde R 16 N - 115- - vertical extraction Linde R 16 N HD - 1120-00 - front extraction Linde R 16 SN - 115-08 Linde R 20 - 1120-00 Linde R 20 N - 1120-00 - front extraction Linde R 20 N - 113-00 Linde R 20 SN - 115-08 Linde V 10 E - 14 - vertical extraction Linde V 10 E Linde V 12 E - vertical extraction Linde V 12 E - vertical extraction Still EK 11 Still FM 14 N Jungheinrich EKS 312 Jungheinrich ET 214 Jungheinrich ET 216 Jungheinrich ETM 214 Jungheinrich ETV Jungheinrich ETV 112 Jungheinrich ETV 216 Iiedpfx Aqoy Rnizjuoc Jungheinrich ETV Q Jungheinrich ETV Q 20 Jungheinrich ETV Q 25 Crown ESR 5220 Crown ESR 5220-1.4 Crown ESR 5220-1.6 Caterpillar NR16N2C Hyster K1.0H Steinbock-Boss WR 16 Other common battery sizes available on request. Transport possible.

Condition: refurbished (used), battery capacity: 620 Ah, battery voltage: 48 V, total height: 782 mm, total length: 1,220 mm, total width: 352 mm, Tested forklift battery for your truck - 48V 4PZS 620Ah - DIN C + 1 year warranty + Includes Aquamatik (automatic filling system) + Includes end cell connector & REMA 320 plug (other plug types can be fitted upon request) + Capacity: min. 90-100% (C5 capacity test protocol included on delivery) + Year of manufacture: 2024 Dimensions: Length 1,220 mm Width 352 mm Height 782 mm Weight: approx. 960 kg Suitable for the following models and many others: Linde A (1250) - 5022-00 Linde A - 5224-00 Linde R 10 B - 1120-00 Linde R 10 B - 1120-00 - front battery change Linde R 12 B - 1120-00 Linde R 12 B - 1120-00 - front battery change Linde R 12 C - 1120-00 Linde R 14 - 1120-00 Linde R 14 - 1120-00 - front battery change Linde R 14 B - 1120-00 - front battery change Linde R 14 G - 1120-00 - front battery change Linde R 14 HD - 1120-00 Linde R 14 HD - 1120-00 - front battery change Linde R 14 W - 1120-00 Linde R 14 W - 1120-00 - front battery change Linde R 16 - 1120-00 - front battery change Linde R 16 AS - 1120-00 - front battery change Linde R 16 AS 1270 - 1120-00 Linde R 16 B - 1120-00 - front battery change Linde R 16 C - 1120-00 Linde R 16 G - 1120-00 - front battery change Linde R 16 HD - 1120-00 Linde R 16 HD - 1120-00 - front battery change Linde R 16 S - 115-00 Linde R 16 S ACTIVE - 115-12 Linde R 16 W - 1120-00 Linde R 16 W - 1120-00 - front battery change Linde R 20 - 1120-00 Linde R 20 - 1120-00 - front battery change Linde R 20 - 115-00 Linde R 20 G - 1120-00 - front battery change Linde R 20 G - 115-12 Linde R 20 S - 115-12 Linde R 20 W - 1120-00 - front battery change Still FM 14 Still FM 17 Still FM-X 12 Still FM-X 14 Still FM-X 17 Still FM-X 20 Jungheinrich ETV Jungheinrich ETV 112 Jungheinrich ETV 214 Jungheinrich ETV 216 Jungheinrich ETV 320 Jungheinrich ETV 325 Jungheinrich ETV C 16 Toyota/BT RRE 200 Crown ESR Crown ESR 3020-1.4 Crown ESR 3020-1.6 Crown ESR 3020-2.0 Crown ESR 4000-1.4 Crown ESR 4000-1.6 Crown ESR 4000-2.0 Crown ESR 4500 Crown ESR 4500-1.4 Crown ESR 4500-1.6 Crown ESR 4500-2.0 Crown ESR 5000 Crown ESR 5000 S Crown ESR 5000-2.0 Crown ESR 5240 Crown ESR 5240-1.4 Crown ESR 5260-1.4 Crown ESR 5260-1.6 Crown ESR 5260-2.0 Crown ESR 5280S-1.6 Crown ESR 5280S-2.0 Atlet REACH TRUCK Atlet UMS 160 Atlet UMS 200 Atlet UNS 140 Caterpillar NR14/16 Caterpillar NR14N Caterpillar NR14N2S Caterpillar NR16N Caterpillar NR16N2HS Caterpillar NR20NH Hyster R1.6 Mitsubishi RB14N Mitsubishi RB14N2S Mitsubishi RB16N Mitsubishi RB20N2H Mitsubishi RB20NH Nichiyu FBR14-75B OM-Pimespo-Fiat XR 14 AC Rocla REACH MAST TRUCK Yale MR 14 Yale MR 16 Common battery sizes available on request. Iiodpfx Asy Rniujquec Transport possible.

Condition: used, Year of construction: 1985, functionality: fully functional, Scheer DB5 line boring machine - Year of manufacture: 1985 - 380 Volt - 21 spindles; 32 mm pitch - stop ruler - various dowel drills - portal clearance: 1056 mm - 2.2 kW Transport available at extra cost! Iodpfx Aswv Uy Doqueic

Condition: used, Year of construction: 1975, Number of spindles: 20 Drill spacing: 32 mm Iodpfx Aqey E Hfksujic Power consumption: 1.8 kW

Condition: new, functionality: fully functional, Cutting rotor for a strand pelletizer Manufacturer: MAAG / Scheer - Cutting rotor width: 200 mm Iisdjpgulwspfx Aquec - Excellent condition

Condition: good (used), Manufacturer: John Scheer Meuselwitz Machine number: 6815.17 Type / Model: SFW 250 Table: mm Sanding area: 1,000 x 250 mm Magnet: 1,000 x 250 mm Grinding wheels: mm Table speed: m/min Table spindle center max.: mm Iisdpfjrrdtxjx Aqujc max. sanding height: mm Connection: 10.5 kW Accessories/equipment: Electromagnet Condition: good Weight: 5 tons Dimensions: mm

Condition: good (used), Year of construction: 1980, Dowel drilling machine for frame production Isdpfx Aoyy I Snsquoic

Condition: used, Year of construction: 1985, Used machine Year of manufacture: 1985 Universal dowel drilling machine with swiveling drilling unit with fully automatic control with 2 safety pneumatic clamps Drill motor 2.2 kW with 21 spindles Spindle pitch: 32 mm with attached oil damper Iedpfx Aoyvl Hzsqusic Height adjustment: 80 mm Drilling depth: 80 mm Weight: 420 kg Availability: short notice Location: Röllbach

Year of construction: 2008, condition: good (used), functionality: fully functional, Used strand granulator Year of manufacture: 2008 Scheer SGS 100-E4 Condition: good, functional tested Iiodpfehfmrtjx Aqusc Available immediately

Condition: excellent (used), DB5 dowel hole drilling machine & row drilling machine Iiedjytvarspfx Aquec - 21 drilling spindles - 32mm spindle pitch - 380 volts - 2.2 kW - Dimensions: length 1400mm x depth 900mm x height 1300mm - 2 pcs longitudinal stops

Condition: used, functionality: fully functional, mileage: 687,000 km, power: 294.2 kW (400.00 HP), first registration: 08/2007, fuel type: diesel, axle configuration: 8x4, wheelbase: 3,800 mm, fuel: diesel, gearing type: mechanical, emission class: euro5, suspension: steel-air, loading space length: 6,800 mm, Year of construction: 2007, Equipment: ABS, retarder, 8x4 Euro 5 Manual transmission Iisdjrdd Alspfx Aquec Tridem 4th axle is steering axle and lift axle Wheelbase 3.80m Length of loading area: 6.80m Technically in good working order and ready to drive

Condition: used, Year of construction: 1975, used hole line drilling machine Model Scheer DB 20 Isdpfx Asri R Hajqujic table size 1400 x 630 mm 1 drill beam a 21-spindle, 32 mm pitch height adjustment 40-100 mm Spindle distance max 640 mm, Working length 700 mm per cycle by moving the workpieces max. 2656 mm throat 550 mm Motor 1.8 KW 1 stop rail with immersion stops Weight approx. 240 kg

Condition: ready for operation (used), A panel dividing saw Scheer & Cie is available. Cutting length: 4200mm, fence depth: 4250mm, table length: 4200mm, max. cutting height: 70mm, height levels: 3, feed rate: 40m/min, return speed: 50m/min, angular pressure device: 2400mm, air cushion tables: 3, air cushion table dimensions X/Y: 1720mm/800mm, clamping fingers: 7, saw motor power: 9kW, control: Siemens PLC, system: Linux Ubuntu with graphical interface. Including adjustable scoring saw, residual cut device, safety devices, remote maintenance, optimization program Optimax and freely adjustable labels that are printed during sawing. Documentation available. An on site inspection is possible. Isdpfxoyq R E Re Aqujic