Used Sbl Machinery Co Ltd Cutting Press Sbl-820 for sale (91,813)

Condition: excellent (used), Year of construction: 1987, Universal non stop Feeder In line pile preparation 4 fron lays Pull guide OS 16 INDEPENDENT HEATING ZONES Honeycomb Leteral guiding device for foil Motorized foil tension, air cooling Hjdpfsvyn Ttsx Ahgst Size 102x72 cm Min size 40x35 cm Speed with hot stamping 5000 per hour max Speed for die cutting 7500 per hour max

Year of construction: 2015, condition: excellent (used), functionality: fully functional, Technical specifications for the bale opening line for RDF, MSW, paper, and cardboard: Manufacturer: Cross Wrap Oy Ltd., Siilinjärvi, Finland Type: BO 4000 Year of construction: 2015 Number of bales opened: 674 Operating time: only 3 days, exclusively during the initial commissioning of the entire system upon new installation Opening time: approximately 45 seconds per bale Bale dimensions (W x H x L): 1100 x 1100 x 1400 – 1900 mm Max. bale weight: 2,000 kg System conveying height: 1,400 mm Max. system conveying width: 1,200 mm Material to be opened: RDF/MSW System availability: 98% Hedpfx Aszp H R Eehgst Noise level of the bale opening line: 85 dB(A) Total connected load: 37 kW Rated current: 125 A Control panel: SIEMENS SIMATIC HMI Touch Controller: SIEMENS S7 ET200S Installation dimensions: 8,463 x 2,890 x 3,960 mm (L x W x H) Scope of supply: Infeed conveyor: 3,500 x 1,200 x 1,400 mm Feed conveyor to the opener: 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in the hydraulic oil tank Control cabinet heating Oil cooler for hydraulic unit Explanation for the short operating time: The entire Cross Wrap bale opening line, type BO 4000, was installed in 2015 at a municipal waste incineration plant. The reason for installing the system was to ensure that municipal waste could continue to be accepted, compressed, wrapped, and stored even during an operational disruption or maintenance of the incineration plant until the disruption was resolved. Subsequently, all the bales were to be opened again, and the waste fed into the normal incineration process. This worst-case scenario never occurred. The system was installed, commissioned, and then never used in normal operation. Only during the commissioning and initial operation of the entire system in 2015 were 674 bales opened over three days. The system is in very good condition and is immediately ready for operation. Due to restructuring measures in the incineration plant, the installation space of the bale opener was needed. This means that the complete line is now available for sale. Brief description of the bale opening process: The compressed bales are placed on the infeed conveyor from the side or from the rear using a forklift. To open the bales, they must be positioned horizontally to the conveyor with the wire or twine binding; otherwise, the bales must be rotated by 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or the twine binding. The rotating knife cuts the bale lengthwise. After that, the gripper returns to its starting position. The opened bale is now conveyed via the conveyor to the discharge chute and then falls onto the subsequent conveyor system. Remarks: New price of the complete system: €296,000. The documentation (operating manual, CE declaration, electrical/hydraulic circuit diagram) is complete. The system has been dismantled into transportable units, stored, and is available for inspection and loading in the short term. We assume no liability for the technical data or any potential errors.

Condition: good (used), Drossert ST 3B Cauhe Die cutting machine The machine is fully operational, ready for production. Weight 3500kg Power supply 380V Production under the Drossert Maschinenbau GMBH Germany brand by the Cauhe factory in Spain. Equipment: Hodpfoztpa Rsx Ahgot – pneumatic clutch and brake – console – 3 operating modes: single, continuous, with time delay on opening – central lubrication – additional safety covers – hard sheet metal for pressure

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Lead Edge type Sun with alignment table LONG Feeder and OS and OOS squaring joggers Die cutting station with center line II Stripping station with Quick Lock clamping of male and female tools Removal of grip edge High pile delivery Max speed 5,500 cycles/hour Max size 1,200x1,650 mm Hjdpfx Ahozmrnwsgot

Condition: like new (used), Year of construction: 2020, operating hours: 1,000 h, functionality: fully functional, total height: 1,600 mm, total width: 1,600 mm, total length: 15,000 mm, overall weight: 6,440 kg, The equipment has been used very little, is almost like new, and has under 1,000 operating hours. Three-corner packaging gluing machine with automatic box base forming and gluing device with cold adhesive. - Maximum format: opening 98 cm - Line speed: 0-300 m/min, continuously adjustable - Cardboard thickness: 280-700 gr/ sqm. - Box type: crash-lock base box, straight line box, double wall box. - Folding method: 1st fold at 180°, 3rd fold at 135°, 2nd & 4th folds at 180°, turntable for other models. Other specifications: - Equipped with sensors. - Operation via touchscreen displaying all important information about the machine status. - The belts are adjusted centrally by means of knobs. - The straps can be swung out of the way for easy access in the event of an intervention to unlock the boxes. - Separate, adjustable straps and stacking and removal. - Distance between products is adjustable by coupling. - Remote control panel with cable for easy format adjustment. - Special turning plate to make it possible to glue other types of boxes such as CDs. - Box type: crash-lock base box, straight box, double-walled box - Folding method: 1st fold at 180°, 3rd fold at 135°, 2nd & 4th folds at 180°, turntable for other models. - Feeding system: Automatic vibratory feed, - Grinding unit - Correction section Hedpfx Aowqcrqjhgjt - Pre-finishing section; - Motorization for format change - Electrical power: 11,5 kW - External dimensions: 15000 x 1600 x 1600 mm - Weight: 6440 kg

Condition: reconditioned (used), Year of construction: 2017, functionality: fully functional, Dear Ladies & Gentlemen, We are offering a XEROX Colour Press C550 with CREO CX560 Print Server (Activation dongle for monitor, keyboard and mouse is included, the accessories themselves are not included!), i1 Spectrophotometer, A3+/SRA3 High Capacity Feeder with 1 Tray & Professional Booklet Maker Finisher for sale. OPTIONAL: As an alternative to the CREO Print Server we can also attach an integrated FIERY EX-i 560 controller to this machine at the same price. Please ask for the FIERY in this case. The machine will be delivered with either CREO Print Server or FIery Controller. Counter: ONLY 1.730.992 prints total This machine was fully and professionally checked in the seller's workshop and is in excellent condition with perfect print image quality. Hedpfxszrulps Ahgst Please contact us with questions! We will be happy to help you!

Condition: like new (used), Year of construction: 2022, operating hours: 120 h, functionality: fully functional, The Red Rhino 7000 is a mobile (mini) jaw crusher – essentially a self-contained, movable crusher that uses one fixed and one movable jaw to crush material. - Crushing principle: Jaw crusher – large, wear-resistant jaws made of manganese steel. - Inlet size: approx. 700 mm × 400 mm – this is the maximum material size the crusher can handle at one time. - Capacity: up to approx. 45 tons/hour (depending on material quality). - Drive: Diesel engine (e.g., Deutz, approx. 66–70 hp, but the exact engine size depends on the specific model). - Output size: adjustable between coarse and fine (e.g., 10–120 mm), resulting in variable particle size of the crushed material. - Mobility: Tracked or rubber-tired chassis → easy to move across terrain. - Control: often via radio remote control. What is it used for? Hedpfx Ahjy It Tgegst - Crushing construction waste - On-site crushing of concrete, reinforced concrete, bricks, and stones for reuse or easier handling. - Recycling

Condition: used, Heidelberg KSB Cylinder Automatic die cutting machine Max Sheet Format: 40 x 57 cm (approx. 15.75 x 22.44 inches) Min Sheet Format: 12.5 x 15.0 cm Speed: Approx. 5,000 sheets/hour Weight: ~3,500 kg Hot foil device Hedpfxsxz D Daj Ahgot Step motor Schneider PLC Schneider with full documentation 2 zones - two push and pull rollers

Year of construction: 2019, condition: used, total length: 2,600 mm, total width: 2,800 mm, total height: 1,600 mm, cutting width (max.): 1,800 mm, The FQJ-1800 honeycomb panel cutting machine (year of manufacture 2019) is an efficient, used machine, ideal for precise cutting of panels with widths ranging from 125 mm to 1800 mm and thicknesses of 10–80 mm. Equipped with three blades, it allows for adjustable cutting speeds in the range of 0–50 m/min, enabling the machine to be adapted to individual production needs. The motor has a power of 4 kW (380V, 50Hz), ensuring reliable and high performance even under intensive use. The machine comes from the renowned manufacturer San(qingdao) Machinery Co., which guarantees a robust construction and durability. This is an excellent option for companies looking for professional solutions in the field of honeycomb panel cutting. Hodpfx Ahezuxmiegjt

Year of construction: 1996, condition: ready for operation (used), machine/vehicle number: 960606 (= tevens de dag dat machine fabriekspoort verlaat), PRICE LOWERED for quick deal ! Hjdexz Ncbjpfx Ahgot

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, FEEDER PLUS System Adjustable operator-side clamping team with Centerline references, with control of the presence of sheets Operator-side pushing team opposite Double sheets detector Centering and closing of the die-cutting equipment Waste trimming extraction station with quick tool clamping High stack exit Bobst CUBE II Above elevated by 35 cm. Blank preparation frame outside the machine Max format: 102x142 cm Min format: 50x70 cm Min paper weight: 80 g/m² Max cardboard weight: 2,000 g Max corrugated thickness: 4 mm. Hodpfx Ahjy D Ht Sjgst Max speed: 7,000 sheets/hour Max pressure 600 Tons Available September/October 2026

Condition: good (used), Hoza EMU punch This machine is ideal for punching out small molded parts from paper, rubber or textile goods. It has a high pressing force and fits on any stable table. The cut is initiated via a two-hand safety control. Forged blades or steel rule blades can be used in the machine. Knife stroke: 30 mm Max. punching format: 150 x 100 mm Weight: approx. 150 kg Hsdpfxeuzhmto Ahget Color: hammer blow blue Dimensions: 450 x 360 x 600 mm Further items in other sizes - new and used - can be found in our store! International shipping costs on request!

Year of construction: 1970, condition: ready for operation (used), machine/vehicle number: 55703, SANDT 410 Hydraulic Swing-Arm Cutting Press – 18 tonnes Price: €3,650 excluding VAT Delivery terms: EXW Son en Breugel, the Netherlands Very clean and robust German hydraulic swing-arm cutting press manufactured by J. Sandt AG, Pirmasens. Suitable for die-cutting materials such as leather, rubber, plastics, foam, felt, textiles, gasket material, cork and cardboard. Technical specifications * Manufacturer: J. Sandt AG Hedpfx Aezqhdiehgjt * Model: 410 * Serial number: 55703 * Year of manufacture: unknown, presumably late 1960s * Cutting force: 18 tonnes * Working table: 900 × 450 mm * Swing-arm pressure plate: 550 × 350 mm * Measured clearance: approximately 110 mm * Mechanical height adjustment by handwheel * Electrical supply: 380 V, 3-phase, 50 Hz The machine is in clean, used condition and has been repainted. The lower cutting plate and the aluminium upper plate show signs of use. Machining and surface-grinding of both the lower and upper plates can be carried out upon request for an additional €250. The machine can be inspected and tested by appointment. Loading onto the buyer’s transport can be arranged. All information is provided to the best of our knowledge and is subject to verification.

Condition: good (used), Year of construction: 2014, Food Machinery Co E4230 VFFS bagger Hjdpfjwtqrwjx Ahgot 2014, Stainless VFFS, jaw width 250mm, adjustable seal temperatures and variable cool time, currently set with 95mm diameter forming set, with Eidos Swing thermal printer, 1Ph

Year of construction: 2014, condition: used, functionality: fully functional, Equipment: CE marking, We offer this used Vechiatto PRESSA 1900*820 10V R4000 press for the production of spring strips, manufactured in 2014. Manufacturer: Vechiatto Model: PRESSA 1900*820 10V R4000 Year of manufacture: 2014 Condition: used Hsdjztdbvopfx Ahgst Machine type: Press for the production of spring strips If you have any questions or require additional information, please send us a message or contact us by phone.

Condition: new, Year of construction: 2025, functionality: fully functional, pressing force: 100 t, stroke length: 380 mm, table width: 300 mm, table length: 1,500 mm, throat depth: 1,100 mm, TECHNICAL DETAILS Press force: 100 t Max. stroke: 380 mm Stroke length: 100 mm Overhang: 1,100 mm Vertical adjustment: 750 mm Table length: 1,500 mm Table width: 300 mm MACHINE DETAILS Press type: Single-acting Control system: Conventional Motor power: 3.0 kW Dimensions & Weight Dimensions (L x W x H): 1,450 x 800 x 2,200 mm Net weight: 970 kg Transport packages: 1 piece EQUIPMENT Hsdpfezxcldex Ahget Movable press cylinder Documentation CE certificate CE marking

Condition: good (used), Wohlenberg 115 TS Paper Cutting Machine Machine in very good condition, ready for production. Year of manufacture: 2008. Available immediately from stock. The guillotine can be used as a standalone unit or integrated with cutting systems. Program generation is menu-driven and includes a variety of cutting tasks, such as single cut, programming, multiple cuts, non-cutting hold-down, and automatic actual value transfer. Wohlenberg premium cutting machines are manufactured in Solms, Germany. Distinguishing Features of the Wohlenberg Machine: – Interactive User Interface – 18.4” Touchscreen – USB Interface – Ethernet Interface – Windows CE Operating System – Positioning via Electronic Handwheel – Optimized Cutting Cycle – Programmable Hold-Down Pressure – Automatic Adjustment of Hold-Down Pressure to Cutting Width – Automated Front-Mounted Knife Change – Quick Knife Change – New Machine Body Cast in One Piece = Increased Stability – Maintenance-Free Electromagnetic Clutch Technical Data: Cutting Length: 1150 mm Maximum Stack Height: 165 mm Infeed Depth: 1150 mm Minimum Cutting Capacity with Sheet Metal Under Pressure Beam: 77 mm Hjdszw Tzaopfx Ahget Minimum Cutting Capacity Without Sheet Metal Under Pressure Beam: 20 mm Maximum Saddle Feed Speed: 300 mm/s Maximum Mechanical Efficiency Knife speed: 44 cycles/min Saddle movement: above the work table Main motor power: 4 kW Net weight: 3200 kg The machine is equipped with a spare knife, cutting sticks, a pressure plate, documentation, and tools.

Condition: used, Fully automatic RATTUNDE line ACS100/2 integrating: · cutting, · brush deburring, · facing / chamfering, · 100% length control, · automatic robotic packing with double output system · and very large set of tooling. Designed for high-precision single or double cuts. One of the fastest tube cutting machine on the market. TECHNICAL DATA Cutting diameters: 10 - 100 mm Entry length: 12.000 mm Cutting length: 25* - 2.000 mm (*25 - 150 mm with special tooling) Performance: Up to 1.500 pieces/hour SCOPE OF SUPPLY 1. BM 8 bundle loading magazine in light construction 2. ACS 100/2 Cutting production system with piece counter 3. Brush deburring machine BDM 4. Chamfering machine CFM 5. Length measuring device Pi 6. Automatic stacking robot SRT 7. Safety fence with light barrier to secure the BM bundle loading magazine 8. Step conveyor SCB for the transport of pieces 9. Conveyor for test tubes Hedpfx Aoyz Rvxshgjt 10. Complete set of tooling 11. Switch cabinet & control system for the complete line Performance: Up to 1.500 pieces/hour Cutting diameters: 10 - 100 mm Entry length: 12.000 mm Cutting length: 25 - 2.000 mm (25 - 150 mm with special tooling) Thickness: From 0,5 mm to solid

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: HB10011N2025006, The machine has not been used yet! MACHINE DETAILS Hsdjzuw D Tjpfx Ahgst Control: Teach-in Motor power: 4.0 kW Dimensions & Weight Dimensions (L x W x H): 1,300 x 800 x 1,400 mm Unladen weight: 800 kg Transport packages: 1 piece EQUIPMENT Documentation CE marking CE certificate

Condition: good (used), Polar Mohr 78 X Paper Cutting Guillotine Machine has been serviced and is ready to use, in perfect condition. Manufactured in 2008. Technical specifications: Cutting width: 780mm Stack height: 120mm Hedezw Tyvopfx Ahgst 15″ LCD display 400V power supply Weight: 1400kg Enlarged side tables Chrome table surface Table lighting and optical cutting line Continuously adjustable clamping force Additional rear table guards. Spare knife, cutting sticks, tapping block, and operating tools.

Condition: good (used), Polar Mohr 115 X Plus Paper Cutting Guillotine This machine is in very good condition, ready for production, and has been serviced. Low mileage. Year of manufacture: 2011. This is the most valued guillotine brand, a flagship product. Hedpfozw T A Rjx Ahget Technical specifications: Cutting width: 1150mm Stack height: 165mm Programmer with 18.5″ color touchscreen display Air table Photocells Chrome table surface Ball screw drive for the rear comb Optical cutting line Enlarged side tables Knife change via the control panel Additional rear table guards Weight: 3200kg 380V power supply Includes documentation, a tool kit, a tapping block, a spare knife, and one knife in the machine.

Condition: good (used), functionality: fully functional, Year of construction: 2011, operating hours: 31,411 h, TRUMPF Trumatic 3000 K03 Punch-Laser Combination Machine The punch-laser combination machine enables the flexibility of laser cutting to be integrated with the advantages of punching. The combination of these two technologies opens up a wide range of new possibilities, allowing the manufacturing of even the most complex sheet metal parts. Technical Specifications: - Punching force: 165 kN - Maximum sheet size: (X, Y) 2500 mm x 1250 mm - Max sheet thickness: 3 mm Hsdpfx Asycuypehgjt - Maximum tool diameter: 76.2 mm - Maximum forming height: 25 mm - Maximum bending length: 55 mm - Chipless thread forming: M2.5 – M8 - Laser power: 2000 W - Number of tool stations: 18 - Tool change time (per tool): 3.9 s - Tool change time (MultiTool): 2.2 s - Positioning accuracy: ±0.1 mm - Repeatability: ±0.03 mm For optimal surface quality of sheet metal parts, the machine is equipped with a brush table and rollers surrounding the forming tools. The MultiTool stations can hold up to 180 different forming tools. Thanks to reduced production times and lower energy consumption, this punch-laser combination system offers a lower cost per unit compared to flatbed laser cutting machines, ensuring higher economic efficiency. This equipment is perfectly suited for efficient, high-volume production of complex sheet metal components. The integrated laser cutting head enables the creation of intricate shapes, delivers high-quality cut edges, and can be used when a specific profile punching tool is unavailable.

Condition: excellent (used), A robust cutting press from the renowned Italian company ATOM. This machine is designed for cutting elements made of leather, rubber, felt, technical foams, cardboard, and other soft materials using steel dies. It is equipped with height and pressure adjustment using a handwheel. The heavy cast iron construction ensures stability and a long service life for the machine. Technical data: Manufacturer: ATOM Model: G777E Serial number: 6218 Motor power supply: 220 / 260 / 380 / 450 V Current connection: 220 V Adjustable working height Stable cast iron construction Made in Italy Condition: Used machine, in good visual condition. Condition as shown in the pictures. Sold in the exact condition as presented in the photographs. Hedpfx Aszgg Sqjhgjt

Condition: ready for operation (used), Year of construction: 1985, Bobst SP 102 CER - Perfect condition available immediately Year 1985 Max.Size: 1020x720 mm Min.Size: 400x350 mm Max.Speed: 8000 Sh/h Max. Cutting force: 250T Paper: min. 80 gr/qm Cardboard: max. 2000 gr/qm Centerline Feeder Non-Stop Hjdpowathhjfx Ahgst Autom. Non-Stop with Sheet inserter Side guide Quick Lock system

Condition: used, Format: 0x0 Hedpfx Aex Rh D Sohgst Equipment: Toggle press for beech corners, 40 mm stroke, 73 mm throat depth