Used Sahinler Hpk 200 Dp for sale (17,613)

Condition: like new (used), Year of construction: 2021, operating hours: 180 h, functionality: fully functional, machine/vehicle number: 35120025 (inkl. Zubehör 35120030/35120035/35120040), type of input current: three-phase, space requirement height: 2,010 mm, space requirement length: 2,374 mm, space requirement width: 754 mm, Sollich nut mixing unit, type NM 200 VA, year of manufacture 2021, for the continuous mixing of dry ingredients into chocolate, fat, and spreadable products. Performance: • max. 1,200 kg/h of spreadable product with 5% dry ingredients (60 kg/h) • max. 1,200 kg/h of spreadable product with 10% dry ingredients (120 kg/h) Equipment: • retractable mixing screw for simplified cleaning, recommended for frequent product/color changes • 2 installed rotary valve feeders TD 1 (machine no. 35120030 and 35120035), arranged opposite each other, each with a level switch and a 150-liter hopper. This allows two different dry ingredients to be dosed in parallel or double the dosing capacity for one dry ingredient to be achieved. • Double-walled collection hopper at the mixer outlet with emptying pump SKP 1000 L-VA (machine no. 35120040) • Unheated connecting pipe attached to the side of the lower container section to the hopper for complete emptying via the attached rotary lobe pump SKP 1000 L-VA, can be shut off on both sides with flat flap valves, pipe can be removed via milk pipe fittings and quick-release couplings. • Hot water circulation system with water-water heat exchanger and circulation pump to supply the mixer, collection hopper, emptying pump, and piping to the filling system, for connection to the customer's cold water supply. • Stainless steel control cabinet for housing the power electronics • Visualization and operation are carried out ex works via the HMI of the associated tempering machine; a separate operating panel is not part of the unit. • Completely installed on a mobile stainless steel frame with swivel casters or lifting tabs for moving with a lifting device, frame with ergonomic handle, all media connections are pluggable or with quick-release couplings. This makes the unit mobile and can be switched between several lines. For operation with another control system, an adjustment of the visualization is required; the power electronics are included in the supplied stainless steel control cabinet. Isdszzvhdepfx Ah Ejtl Connection requirements: • customer's cold water for the hot water circulation system • 400 V, 3 phases, 50 Hz + neutral + earth Condition, history and process: Year of manufacture 2021, delivery and commissioning by Sollich in week 40/2021, approximately 180 operating hours. Used exclusively for palm oil-free spreads including nut-containing products, stored dry in Wuppertal since the end of 2024, inspection by appointment. Documentation and conformity documents are available. Purchase value in 2021 according to order confirmation: €116,830 (unit complete including rotary valve feeders, emptying pump and stainless steel frame). Sale from business to business with exclusion of warranty, technical specifications according to manufacturer's documents, subject to errors. This nut mixing unit is also available as part of a complete tempering and mixing system (including Turbotemper TE 1600 D and cooling unit), see advertisement ID A22725782.

Year of construction: 2014, condition: ready for operation (used), functionality: fully functional, Q-Fin F200 deburring and grinding machine with conveyor belt For sale: Q-Fin F200 deburring and grinding machine for professional surface treatment, equipped with a conveyor belt. This compact industrial machine is suitable for the efficient post-processing of metal parts. Ideal for deburring, grinding, and improving the surface of workpieces after, for example, sawing, milling, laser cutting, or other machining operations. The machine was used in our production process and is being offered for sale due to the cessation of our business activities. Machine details: Brand: Q-Fin Type: F200 Deburring and grinding machine For surface treatment of metal parts Equipped with a conveyor belt Suitable for series production Compact industrial design Year of construction: 2014 (second owner) Includes: grinding media / accessories Optional: Dust extraction system (at an additional cost - year of construction 2021) Itodpfx Ahjz A A E Ae Ejl The conveyor belt enables efficient and consistent product flow, making the machine very suitable for the rapid and reproducible post-processing of larger quantities of parts. The machine is currently still installed and can be viewed in working condition by appointment. If you are seriously interested, please do not hesitate to contact us. Additional photos, videos, and technical information are available upon request.

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 10800 € 207.36 € 35 mm 137 mm 137 mm Itodpfx Aheynnhks Eel 3 1.1 kW 7 m/min 35x8 mm / 300 mm 50x12 mm / 400 mm 18x18 mm / 250 mm Ø 22 mm / 200 mm Ø 40x1,5 mm / 500 mm 30x15x2,5 mm / 500 mm 25x25x2 mm / 450 mm 35x35x5 mm / 400 mm 30x30x4 mm / 550 mm 1050 mm 500 mm 1250 mm 350 kg 3 mech. driven rolls (brake motor) hardened and ground shafts lower rolls hydraulic adjustable horizontal and vertical operation standard set of rolls foot pedal forfor- and backward drive 2 digital readouts control panel machine and equipment accordingto the CE regulations user manual in GERMAN and ENGLISH WE HAVE MORE THAN 210 REFERENCES!

Condition: used, Year of construction: 2019, operating hours: 2,294 h, functionality: fully functional, machine/vehicle number: 0-250-71-6845, feed length X-axis: 3,050 mm, feed length Y-axis: 850 mm, feed length Z-axis: 70 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 15 m/min, working width: 850 mm, total width: 1,984 mm, total length: 2,920 mm, total height: 1,895 mm, We offer a well-maintained HOMAG DRILLTEQ V-200 vertical CNC drilling and routing centre, manufactured in 2019. The machine was purchased new and has been used exclusively by our company. Our production volume is relatively low, and the machine has not been operated continuously or in two-shift production. It has typically been used for approximately 3–4 hours per working day. The machine is fully operational and currently in production. It can be inspected and tested under working conditions at our premises in Kaunas, Lithuania. A video of the machine in operation can be provided upon request. Key information: Manufacturer: HOMAG Model: DRILLTEQ V-200 Itodpfx Aozzwl Dsh Ejl Year of manufacture: 2019 Condition: Used, well maintained and fully operational Purchased new and owned by one company Approximately 145,105 parts processed Main operating time: approximately 2,294 hours HOMAG powerTouch control system Used in a small-scale, single-shift production environment Price: EUR 38,000 net. VAT may apply depending on the buyer’s VAT status and country of destination. Location: Kaunas, Lithuania For further information, technical specifications and additional photos, please call +370 655 51230.

Year of construction: 2004, condition: reconditioned (used), Walter double saw with TRKS 200 feeder double saw blade cutting height 200 mm, engine power 40 kW, Iedpsh R Tvtofx Ah Ejtl chain feeder with drivers with adjustable prism for different diameters. Gear to regulate the speed of feeding the material.

Condition: like new (used), Year of construction: 2016, machine/vehicle number: 0-250-11-2627, functionality: fully functional, input voltage: 400 V, input current: 29 A, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 3,050 mm, workpiece width (max.): 1,250 mm, workpiece height (max.): 80 mm, workpiece weight (max.): 60 kg, number of axes: 3, total height: 2,500 mm, total length: 2,500 mm, overall weight: 3,200 kg, table width: 4,740 mm, Equipment: CE marking, documentation/manual, HOMAG / WEEKE OPTIMAT BHX 200 CNC – Year of manufacture 2016 – HSK63 9 kW – Clamex-P – automatic tool changer – extensive equipment We are selling our HOMAG / WEEKE OPTIMAT BHX 200 vertical CNC machining center, manufactured in 2016. We purchased the machine directly from HOMAG Polska in 2018. Before the purchase, the machine was presented at a trade fair in Germany. It was exhibited with a very extensive range of equipment, which was one of the main reasons for our purchase. Originally, we planned to integrate the BHX 200 into our production line as part of further automation by connecting it to an industrial robot. Ultimately, we did not receive EU funding for this investment. At the same time, our current production volume is not large enough to utilize the full potential of this machine. This is also evident in the relatively low operating hours. For this reason, we have decided to sell the machine. Ijdpfx Ahozzxzmj Ejtl The BHX 200 has served us reliably for many years and is still in continuous production today. We use it to manufacture furniture components from sheet materials. The machine operates very precisely and reliably and is ideally suited for flexible furniture production. This is not a basic BHX 200 with standard equipment. The machine has a very extensive configuration for drilling, milling, grooving, and hardware processing. Equipment: * Vertical drilling head V15 High Speed with 15 individually controlled spindles * 6 horizontal drilling spindles in the X-axis * 4 horizontal drilling spindles in the Y-axis * Additional vertical 3-spindle drilling head for hardware * HSK63 milling spindle * Power up to 7.5 / 9 kW * Speed range 1,250–24,000 rpm * Automatic tool changer * Automatic pick-up tool magazine with 4 positions for HSK63 tools or units * Special unit for Lamello Clamex-P * Unit for grooving in the X and Y axes * Optical workpiece control in X and Y * Automatically positioned workpiece clamps * Automatic adjustment to workpiece thickness * Integrated 1D/2D barcode system including wireless Datalogic barcode scanner and base station Workpiece dimensions: Length: 200–3,050 mm Width: 50–1,250 mm Thickness: 8–80 mm Maximum workpiece weight: 60 kg Control system and software: * HOMAG powerControl / powerTouch * 21.5" Full-HD touchscreen * woodWOP * DXF Import Basic * Tool database * Production list management * woodScan * Ethernet * UPS * ECO Plus * Climate control for the control cabinet The particular strength of this machine lies in its versatility. It is particularly suitable for manufacturers who produce many different types of furniture, sizes, and small to medium batch sizes. The combination of vertical and horizontal drilling, milling, grooving, Clamex-P processing, and automatic tool changer allows a very large number of machining steps to be performed on a single machine. The machine is available immediately. We are confident in its very good technical condition. It is still in use in our production. An inspection and demonstration of the machine in operation can be arranged by appointment. Location: Białystok, Poland.

Condition: new, cutting pressure: 85throat depth: 355stroke: 80length of knive: 482motor: 7,5heigth: 2040weight approx.: 2315 Iodsh Hrx Eepfx Ah Eetl

Condition: excellent (used), functionality: fully functional, Vemag Robot DP 6 vacuum filler with 250-litre divided hopper and lift for 200-litre standard trolley, graphic touchscreen control, twisting gearbox type 859 (stainless steel), DHV 937 with roller guide, clipper socket, accessories, and more. Year of manufacture: 2015. Completely overhauled in 2026, condition – as new! Delivery time approx. 1 week after order/deposit. Itodpfxoyk Rynj Ah Eel

Condition: like new (used), Year of construction: 2023, operating hours: 10 h, functionality: fully functional, overall weight: 450 kg, total length: 1,600 mm, total width: 1,100 mm, total height: 1,700 mm, power: 7.5 kW (10.20 HP), type of input current: three-phase, We are selling a pulverizer that was previously used for fine grinding trials in the food sector. The machine is robust, reliable and powerful. Technical data + Power: 7.5 kw + Processing capacity: 20-50 kg per hour + Weight: 450 kg Ijdpfsudvt Rox Ah Eetl Using liquid nitrogen, the machine is immediately ready for use simply plug it in and get started. It is still in mint condition and can be viewed by appointment. be inspected by appointment. The machine is sold plus 19% sales tax. If you are interested or have any questions, we look forward to hearing from you.

Condition: good (used), Manufacturer: Doebeli Iedpfxoxal Iko Ah Ejtl Model: DPA 200 Condition: Used

Condition: used, Year of construction: 2011, operating hours: 7,000 h, functionality: fully functional, machine/vehicle number: 9615, total length: 31,200 mm, total height: 2,300 mm, total width: 4,600 mm, overall weight: 9,000 kg, Equipment: rotational speed infinitely variable, safety light barrier, SC3-200-5 fully automatic cutting system Angle and inclination drive for the sawing station Automatic infeed system Feed cross conveyor (6 strands, wood length up to 14 m) Component support for small cross-sections Control unit for waste disposal Conveyor belt for waste disposal (integrated) 6-arm stacking table (wood length up to 10 m) Itedpfxozyihue Ah Ejl Combination support for vertically operating tools 2x Vertical drilling unit 2.2 kW 2x Vertical chain mortiser 5.5 kW Additional combination support, vertical, for rotary milling cutter Rotary milling head 7.5 kW Combination support for horizontally operating tools 2x Horizontal drilling unit 2.2 kW Marking device, rear Marking device, bottom Marking device, front Angled conveyor, right

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Datacon 2200 EVO (Gen3) The die bonder / multi-chip assembly machine from Datacon (Besi). Ijdpfx Aoy S S Uweh Estl Die attach, multi-chip, and flip-chip capabilities. Placement accuracy: ±10 µm at 3σ Theta: ±0.15° at 3σ Bond force: 0.5–75 N Up to 4 working heads Wafer handling up to 12 inches Die attach up to approximately 7,000 UPH/module Flip-chip up to 2,500 UPH with dipping Heated bond head up to 450 °C Substrate area up to 325 × 200 mm Weight approximately 1,300 kg

Condition: new, messurements (LxWxH): 2040x950x2180weight approx.: 2940total power requirements: 11square steel bar: 50throat depth: 355round steel: 55flat steel shear: 380x25notching (strenght x width x depth): 13x60x100punching - round: 34x26 oder 55x16 oder 110x5angle iron cutting 90° or 45°: 150x150x16 oder 80x10pressure: 115 With two cylinders, hydraulic 5 workstations: - Hole punching station - Notching station, as well as flat steel, bar, and angle steel cutting stations. In the following configuration: - With two cylinders, hydraulic - Support table at the notching and flat steel stations with stops - Hydraulic and electrical components from renowned manufacturers - Support table at the hole punching station with scales and stops - Support table at the notching and flat steel stations with stops - Electric length stop 1000 mm for automatic cut-off trigger Isdpfx Aeh Hvnioh Eetl - Switch for setup and working operation - Technical documentation - Lighting - 2 foot pedals - CE execution SPECIFICATIONS DESCRIPTION / VALUE Model: HKM 115 Punching Force: 115 tons Stroke: 355 mm Stroke: 80 mm Strokes per minute (at 20 mm stroke): 25 Max Sheet Thickness: Ø 34 x 26 mm Working Height: 935 mm Cutting Capacity: 600 x 15 mm, 380 x 25 mm Angle Steel 45° (1 leg): 80 x 80 x 10 mm Angle Steel 90°: 150 x 150 x 16 mm Knife Length: 610 mm Round: 55 mm Square: 50 mm Material Thickness: 13 mm Width: 2,040 mm Depth: 950 mm Motor Power: 11.0 kW Voltage: 400 V 50 Hz Height: 2,180 mm Weight: 2,920 kg

Condition: excellent (used), For sale, a used KSB ETABLOC-G 32-200/752 centrifugal pump equipped with a 7.5 kW electric motor. The pump has been inspected – it is fully functional and ready for operation. Pump data: Manufacturer: KSB Aktiengesellschaft Model: ETABLOC-G 32-200/752 Ident-No.: 48862637 Design: G11 No.: 5-927-123823/1 Itedpjzvf Dqofx Ah Esl Flow rate Q: 35 m³/h Head H: 61.5–43 m Pump speed: 2900 rpm Additional designation: Pumpen Distel Type: G32-200/752 No.: 198057/2 Motor data: Manufacturer: KSB Type: QUPS 132S2C-60 Power: 7.5 kW Power supply: 3-phase Frequency: 50 Hz Voltage: 380–420 / 660–725 V Current: 14.7–14 / 8.5–8.1 A Speed: 2880 rpm cos φ: 0.90 Protection class: IP55 Insulation class: F Used pump, in good technical condition. Normal signs of use and storage are visible. The visual condition is accurately shown in the photos. The pump has been inspected, is fully functional, and ready for further use. The item for sale is exactly the one shown in the photos.

Condition: good (used), Year of construction: 2017, Sahinler 4R HSS 20-280 Hydraulic 4-roll plate bending machine – Year 2017. Itedpfx Ahexau D Is Ejl Bending length 2050 mm Max. bending capacity - mild steel 20. Upper roll diameter 280 mm Lower roll diameter 280 mm Lateral roll diameter 220 mm Bending speed 1,5 / 5 m/min. Motor power 16 kW

Condition: new, angle iron / side length: 60 x 60 x 6double T-iron over x-axis: UPN 80 UNP 30U-iron over x-axis: UPN 65 UPN 30total power requirements: 3weight approx.: 1,4messurements (LxWxH): 1200 x 1100 x 800 Itedpfx Ahod Acazo Esl

Condition: ready for operation (used), Year of construction: 1974, machine/vehicle number: 5470, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, pressing force: 200 t, stroke length: 250 mm, table width: 250 mm, table length: 3,000 mm, table height: 800 mm, throat depth: 300 mm, ram plate length: 3,000 mm, distance table to ram: 500 mm, clearance between the columns: 2,550 mm, total length: 3,500 mm, total width: 2,000 mm, total height: 3,550 mm, overall weight: 14,000 kg, Equipment: documentation/manual, Force: 2000 kN Iedpfozzxdujx Ah Eotl Working length: 3000 mm Distance between uprights: 2550 mm Stroke: 250 mm Distance table – ram: 500 mm Gap: 300 mm Table width: 250 mm

Condition: new, messurements (LxWxH): 2730x1150x2280weight approx.: 6000total power requirements: 11square steel bar: 55round steel: 65cutting pressure: 175throat depth: 625flat steel shear: 380x30 oder 600x20notching (strenght x width x depth): 16x60x100punching - round: 40x32 oder 57x22 oder 125x5angle iron cutting 90° or 45°: 200x200x20 oder 80x10 Itsdpeh Hvnmsfx Ah Esl

Condition: excellent (used), CATALOG NUMBER 7910 TECHNICAL DATA - Max. working width: 1350mm - Max. working height: 150mm – From above: - Rubber pressure roller I unit (metal grooved roller for calibration) II unit (two smooth metal rollers + sequential sanding pad) - Rubber pressure roller - Cleaning brush Iodpfx Ajy T Ip Tsh Eotl – From below: - Infeed roller, metal - Feed belt - Outfeed roller, metal, slip type - Pneumatic belt oscillation with photocell control - Electric table lifting - 2 feed speeds: 2–14m/min - Main motor: 5.5/15 kW - Brake - Grinding height potentiometer - Feed motor: 0.75kW - Working pressure: 8 bar - Extraction nozzle diameter: 200mm, 120mm - Dimensions (L/W/H): 1860x2200x1980mm - Weight: 1995kg ADVANTAGES – German-made – Unpainted – DTR technical documentation included – Used sander, in very good condition Net price: 38,900 PLN Net price: 9,260 EUR based on 4.2 EUR rate (Prices may change with significant rate fluctuations)

Condition: excellent (used), For sale: KSB ETABLOC G 40-200/1102 G4 centrifugal pump with an 11 kW electric motor. The pump is used, inspected, and in fully working condition. It was checked before being listed for sale. The visual condition corresponds to the photos – normal signs of use and storage are visible. Pump specifications: Manufacturer: KSB – Klein, Schanzlin & Becker AG Type: ETABLOC G 40-200/1102 G4 Flow rate Q: 20–60 m³/h Head H: 57–35 m Rotational speed: 2900 rpm Serial No.: 5-118-547 043/1 Motor specifications: Manufacturer: KSB / Klein, Schanzlin & Becker AG Motor type: ZKA 160 MK2 Power: 11 kW Voltage: 380 V Current: 22 A Frequency: 50 Hz Rotational speed: 2880 rpm cos φ: 0.9 Serial No.: 0-118-886321 Ident-No.: 00533537 Motor No.: 544077 Condition: used – inspected – 100% functional. This is the exact unit shown in the photos that is being sold. Itedpfxszvymge Ah Eol

Condition: ready for operation (used), * Brand: Habermann Itodsywl U Ijpfx Ah Ejl * Type: HPK 200/560 * In: 250mm, Out: 200mm * Cap.: 450-800 cub/h * Driving: E-Motor 90 kW * incl.: Chassis and Spare-parts

Condition: excellent (used), Year of construction: 2013, operating hours: 11,000 h, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 435 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, nominal power (apparent): 54 kVA, torque: 117 Nm, controller manufacturer: Fanuc, controller model: i Series, workpiece height (max.): 200 mm, workpiece diameter (max.): 300 mm, total height: 300 mm, total length: 2,465 mm, total width: 2,835 mm, table width: 200 mm, table load: 60 kg, rotary table diameter: 200 mm, overall weight: 5,500 kg, spindle speed (min.): 120 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 11,000 h, coolant supply: 20 bar, spindle nose: DIN40, number of spindles: 1, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 125 mm, tool weight: 8 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 2013 Doosan DNM 200/5AX 5 Axis CNC Machining Centre Used 2013 Doosan DNM 200/5AX (4+1) 5-axis CNC machining centre with Fanuc i Series control, probe, tool holders, spindle chiller, transformer, swarf conveyor and only 11,000 run time hours. Manufacturer: Doosan Model: DNM200/5AX Machine Type: 5 Axis (4+1) Machining Centre Year: 2013 Control: Fanuc Series i Control Hours: 11,000 Run Time Hours Machine Description 2013 Doosan DNM 200/5AX CNC Machining Centre, a compact, high-performance 4+1 - 5-axis vertical machining centre ideal for precision engineering, toolmaking, aerospace, medical, motorsport, mould and die, and complex component machining. This machine is fitted with a Fanuc i Series CNC control and has only 11,000 run time hours, making it an excellent opportunity for manufacturers looking for a reliable used 5-axis machining centre with strong capability, premium features and valuable accessories included. The Doosan DNM 200/5AX is well known for combining compact footprint, rigid construction and 5-axis positioning. It is ideal for reducing setups, machining complex parts and increasing productivity compared with conventional 3-axis machining. Key Features 2013 Doosan DNM 200/5AX 4+1 5 Axis CNC Machining Centre Fanuc i Series Control Only 11,000 Run Time Hours Iedpfey St Sdsx Ah Estl Includes Renishaw OMP60 probe Includes tool holders Includes spindle chiller Includes transformer Includes swarf conveyor Compact 5-axis machining solution Ideal for complex component machining Technical Specifications X Axis Travel: 400 mm Y Axis Travel: 435 mm Z Axis Travel: 500 mm A Axis Travel: 150 Deg (+30 to -120Deg) C Axis Travel: 360 Deg Table Diameter: 200 mm Max Load on Table: 60 kg Max Workpiece: 300mm Dia x 200mm High Spindle Speed: 12,000 rpm Spindle Taper: DIN40 Pullstud: Nikken PS-806 Tool Capacity: 30 Station ATC Rapid traverse (X, Y): 36000mm/min Rapid traverse (Z): 30000mm/min Rapid traverse: (A - tilt axis) 20 rpm Rapid traverse: (C – rotary axis) 30 rpm Maximum feedrate: (X, Y, Z) 15000mm/min Maximum feedrate: (A, C) 7200 deg/min Feedback system: Absolute encoder Max Tool Diameter: 125mm Max Tool Length: 300mm Max Tool Weight: 8kg Spindle motor AC: 11/18.5kW Axis motor (XYZ): AC 4.0kW Axis motor (A axis): AC 3.0kW Axis motor (C axis): AC 1.6kW Power Requirements: 54.0 kVA Air Pressure: 6kgf/cm2 Machine Dimensions: 2465 x 2835 x 3091mm Approx. Machine Weight: 5,500 kg Run Time Hours: Approx. 11,000 hours Included With This Machine Renishaw OMP60 Probe Tool holders Spindle chiller Transformer Swarf conveyor Fanuc i Series CNC control Why Buy This Doosan DNM 200/5AX? This machine is a strong choice for companies searching for a used 5 axis CNC machining centre, used Doosan machining centre, Doosan DNM 200/5AX for sale, or compact 5-axis vertical machining centre. The 4+1 machining capability allows users to machine multiple faces of a component in fewer setups, helping to reduce handling time and increase production efficiency. With a compact table, high spindle speed and Fanuc control, this machine is particularly suited to small to medium batch production and complex prismatic parts. Applications This Doosan DNM 200/5AX is suitable for: Aerospace components Medical components Motorsport parts Toolroom machining Mould and die work General subcontract machining Complex 4+1 machining Notes: *Specifications are given in good faith but not guaranteed*

Condition: new, pressure: 22stroke: 200table diamension: 625 x 1.100total power requirements: 2,2weight approx.: 0,635messurements (LxWxH): 1,100x0,630x0,925 Ijdpfx Aod Ab Ibjh Eetl

Condition: good (used), Year of construction: 1998, functionality: fully functional, turning length: 305 mm, turning diameter: 210 mm, spindle bore: 56 mm, spindle speed (max.): 25 rpm, spindle speed (min.): 5,000 rpm, Revolver lathe with 12 stations (non-powered) Tool holder: MK 3 Chip conveyor Bar feed tube: IRCO DS 34.8 (year of manufacture 2013) Dimensions (L x W x H): Itjdpfx Ajzl Ei Ssh Ejl - Machine: 4000 x 1700 x 1700 mm - Bar feed tube: 5500 x 1300 x 1500 mm Total weight: approx. 4,000 kg

Condition: used, Year of construction: 2016, Working area: X=3300 mm Y=1280 mm Z=150 mm Clearance height Operator terminal: 24" LED colour display Handheld terminal for axis speed control Software: "Woodflash Vacuum pump 90 m³/h/50 Hz or 108 m³/h/60 Hz Milling spindle 12 kW HSK F63 (12,000 rpm) 12-position linear tool changer on the left of the machine frame + pickup station Drilling head DH 16 4H 2S: Vertical 12 spindles Horizontal 4 spindles 2 grooving saws Storage location: Nattheim Itodpfx Ahoz A Aw Se Eel