Used Saddle Stapler for sale (1,462)

Condition: used, mileage: 300 km, power: 335 kW (455.47 HP), first registration: 02/2025, fuel type: diesel, axle configuration: 3 axles, gearing type: automatic, suspension: air, Equipment: ABS, air conditioning, airbag, central locking, cruise control, immobilizer system, navigation system, parking heater, Special equipment L ProCabin | StreamSpace, flat floor | Axle load - measuring device | Airbag, driver's side | Trailer socket 12V / 13-pole | Audio system: digital radio DAB / DAB+ | Interactive cockpit multimedia system | Navigation system | Driver assistance system: distance control | Sunroof, electric | Fuel tank: 390 liters, aluminum, left | Engine brake, reinforced | Trailing axle 7.5 t, steered, with load reduction | Auxiliary drive MB 131-2c | Wheelbase variant 5200 mm | Frame overhang 2550 mm | Rain sensor | Tire pressure monitoring system | Reversing warning, acoustic (warning signal outside) | Seats in the cab: driver's seat, suspension seat, comfort | Sun visor, exterior | Tires 295/60 R 22.5, rear axle | Tires 355/50 R 22.5, front axle/front lift axle/rear lift axle | Vehicle production site: Wörth | Heavy-duty series, new generation from 18 tons | Reversing camera | Comfort bed, lower | Platform length approx. 8,100mm, body width 2,550mm, loading edge approx. 1,040mm, loaded | Payload depending on the truck version: 13.6 tons at a gross vehicle weight of 26 tons | Body height 120mm | Weight of the complete body approx. 3,850 kg | Fine-grained steel, non-slip surface | 40 lashing points | Ramps | Ramp length 4,800mm, width 750mm, approx. 7° approach angle | Ramps divided with hydraulic lateral displacement | Completely retractable with hydraulic extension of the overall ramp | Mechanical telescopic pivot supports | Hydraulic support at the end of the body | Hydraulic winch, type ComeUp HV 15000 for 6,800 kg pulling force, 27m wire rope, remote control | Sale exclusively to commercial businesses, with exclusion of all warranties. Subject to errors and prior sale. Dodozw D Udjpfx Albjcl

Condition: used,

Condition: used, Year of construction: 2021, operating hours: 70 h, construction width: 1,100 mm,

Condition: ready for operation (used), 1 x Stitching unit 380 with Amrys 2 x Stitching headsd HK75 1 x Caliper control with reject Dcedoxya Eqepfx Albsl 1 x Obluque sheet saddle monitor 1 x Remote control jogger inch 5 x Section feeders 370 with Amrys 1 x Cover folder feeder 554 with Amrys 1 x Three knife trimmer 449 with Amrys 1 x Muller Martini Perfetto stacker delivery 450

Condition: ready for operation (used), 1 x stitching unit 380 with Amrys Dcjdpfx Alovpaubebel 2 x stitching heads HK75 6 x section feeders 370 with Amrys ASIR3 1 x cover folder feeder 1554 with Amrys 1 x three knife trimmer 449 with Amrys 1 x OMG stacker delivery

Condition: ready for operation (used), 1 x stitching unit - 380 2 x stitching heads HK75Q 1 x remote control jogger inch 1 x oblique sheet saddle monitor 6 x section feeders 370 1 x cover folder feeder 1529 Dcedpfjxxnlpsx Albjl 1 x three knife trimmer 449 1 x stacker delivery - Perfetto 450   Optional if needed; Centre cut for double production small size attachment for feeders additional stitching heads 

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 8,240 h, load capacity: 5,000 kg, lifting height: 4,100 mm, free lift: 1,350 mm, fuel type: diesel, mast type: triplex, construction height: 2,200 mm, fork carriage width: 1,350 mm, fork length: 1,200 mm, empty load weight: 6,680 kg, total length: 3,050 mm, drive type: Diesel, construction width: 1,480 mm, Diesel forklift Load center: 500 Fork width: 150 mm Fork thickness: 50 mm Mast type: Triplex Condition: Ready for use and fully functional Technical condition: very good Front tire type: Superelastic Front tire size: 355/45-15 Rear tire type: Superelastic Rear tire size: 2.50-15 Description: In addition to this Linde model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Lease-to-own and financing options are available at favorable terms. We would also be happy to buy your used forklift, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed information about this H50D-02. P.S.: Our forklift workshop specializes in repair, maintenance, overhaul, and custom modifications for forklifts from 8 tons upwards. We would also be happy to offer your vehicle for sale on consignment. Side shifter, fork positioner, Full free lift. Dedpfx Alszt Ttuobocl

Condition: ready for operation (used), 1 x stitching unit 1550 2 x stitching heads HK75Q 4 x section feeders 1551 1 x cover folder feeder 1528 Djdpfx Ajzmzp Djlbocl 1 x three knife trimmer 1565 1 x stream delivery 1564

Condition: used, Year of construction: 2018, operating hours: 4,639 h, load capacity: 15,400 kg, Equipment: cabin, head guard, * Model: H16XM-12 * Year of manufacture: 2018 Dodpfjwguw Dex Albecl * Power: 122 kW * Weight: 25,460 kg * Track width: 2,218 mm * Lifting capacity: 15,400 kg * Forks hydraulically adjustable in width ----Internal vehicle number: 10752----Subject to errors & prior sale. WhatsApp support available! If you have any questions about the vehicle or need further information, feel free to contact us easily via WhatsApp Whatsapp Whatsapp

Condition: ready for operation (used), 1 x stitching unit 380 2 x stitching heads HK75Q Dcsdsyuk S Sopfx Albsl 1 x Touch screen Navigation control 1 x oblique sheet saddle monitor 1 x remote control inch 4 x section feeders 370 1 x cover folder feeder 1529 1 x three knife trimmer 449 1 x stream delivery 1564 Optional; 2 x loop stitching heads 1 x Rima stacker

Condition: ready for operation (used), 1 x stitching unit 1550 1 x Touch Screen Navigation control 1 x SEMKO side caliper  2 x stitching heads HK75Q 6 x section feeder 1551   fitted with ASIR camera recognition              ONLY 2,600 hours from NEW 1 x cover folder feeder 1528 fitted with ASIR camera recognistion  1 x three knife trimmer 1565 Dodpfx Alozlu Sisbocl 1 x stream delivery 1564 Optional if needed; Waste extraction system Loop stitching heads Standards stitchinbg heads Slim line stitching heads

Condition: used, Year of construction: 2024, operating hours: 336 h, Equipment: all wheel drive, Internal Vehicle No.: G300427 Available immediately at our yard in Kaufungen. More information: ? Luis Lucena ? Viktoria Sologubova Merlo Roto 50.21 Rotating Telehandler | 21 m Lifting Height | 4,950 kg Load Capacity | 336 Hours For sale is a used Merlo Roto 50.21 rotating telehandler, manufactured in 2024, with only 336 operating hours. The machine combines a maximum lifting height of 21,000 mm with a load capacity of 4,950 kg and a maximum horizontal reach of up to 17,900 mm. The upper carriage can rotate up to 600°. Permanent all-wheel drive, three steering modes, four independently controlled outriggers, and the adaptive stability control system enable versatile and safe operation. Dcsdpfsytlk Hjx Albsl Technical data: * Manufacturer/Model: Merlo Roto 50.21 * Machine type: Rotating telehandler * Year of manufacture: 2024 * Operating hours: 336 h * Engine power: 55 kW * Emission stage: EU Stage V * Maximum load capacity: 4,950 kg * Maximum lifting height: 21,000 mm * Maximum horizontal reach: 17,900 mm * Rotation range of the upper carriage: 600°, electronically limited * Transport weight: 15,800 kg * Transport length: 6,830 mm * Transport width: 2,430 mm * Transport height: 3,120 mm * Fuel tank capacity: 150 liters * Quick coupler: ZM2 * Permanent all-wheel drive * Three steering modes * Four independently controlled outriggers * MOT: New * Vehicle number: G300427 * Condition: Used Equipment: * Adaptive Stability Control System (ASCS) * 10.1-inch digital display with real-time information about the machine and load * Stage preparation * Remote control * CDC sensor for automatic attachment recognition * Hydraulic quick-change system * Joystick with capacitive release * Direction switch on the joystick * Automatic engine speed increase * ROPS/FOPS cabin * 4.3 m² large glass area * Permanent all-wheel drive * Three steering modes * Four individually controllable outriggers * ecoRent version Inspection and functional testing possible by prior appointment. Further information, photos, and videos are available upon request. Errors, changes, and prior sale are subject to change.

Condition: used, Year of construction: 2024, operating hours: 336 h, Equipment: all wheel drive, Internal Vehicle No.: G300427 Available immediately at our yard in Kaufungen. For more information, please contact: * Luis Lucena * Viktoria Sologubova Merlo Roto 50.21 Rotating Telehandler | 21 m Lifting Height | 4,950 kg Load Capacity | 336 Hours For sale is a used Merlo Roto 50.21 rotating telehandler, manufactured in 2024 with only 336 operating hours. This machine combines a maximum lifting height of 21,000 mm with a load capacity of 4,950 kg and a horizontal reach of up to 17,900 mm. The upper carriage can rotate up to 600°. Permanent all-wheel drive, three steering modes, four independently controlled outriggers, and the adaptive stability control system enable versatile and safe operation. Dedpjyrv S Sjfx Albocl Technical specifications: * Manufacturer/Model: Merlo Roto 50.21 * Machine Type: Rotating Telehandler * Year of Manufacture: 2024 * Operating Hours: 336 hours * Engine Power: 55 kW * Emission Level: EU Stage V * Maximum Load Capacity: 4,950 kg * Maximum Lifting Height: 21,000 mm * Maximum Horizontal Reach: 17,900 mm * Rotation Range of the Upper Carriage: 600°, electronically limited * Transport Weight: 15,800 kg * Transport Length: 6,830 mm * Transport Width: 2,430 mm * Transport Height: 3,120 mm * Fuel Tank Capacity: 150 liters * Quick Coupler: ZM2 * Permanent All-Wheel Drive * Three Steering Modes * Four Independently Controllable Outriggers * Inspection: New * Vehicle Number: G300427 * Condition: Used Equipment: * Adaptive Stability Control System (ASCS) * 10.1-inch digital display with real-time information on the machine and load * Stage Preparation * Radio Remote Control * CDC sensor for automatic attachment recognition * Hydraulic quick-release mechanism * Joystick with capacitive activation * Direction switch on the joystick * Automatic increase in engine speed * ROPS/FOPS cabin * 4.3 m² glass surface * Permanent all-wheel drive * Three steering modes * Four individually controllable outriggers * ecoRent version Inspection and functional testing possible after prior appointment. Further information, photos, and videos are available upon request. Subject to errors, changes, and prior sale.

Condition: used, Year of construction: 2019, !WARNING: TECHNICAL SPECIFICATIONS ARE BASED ON THE DATA SHEET, THESE HAVE NOT BEEN VERIFIED. INSPECTION IS RECOMMENDED. Input format: 4-page sheets, minimum 180 x 105 mm, maximum 550 x 350 mm. Finished format (brochure): minimum 90 x 105 mm, maximum 305 x 350 mm. Brochure thickness: maximum 76 pages. Speed: maximum 6,000 cycles/hour. Machine dimensions: 6500 x 850 x 1700 mm (L x W x H). Dcjdpfezqzclsx Albsl

Year of construction: 2003, condition: used, Collection chain & feed system 6 stations 3 double underframes 5 feeders 416 Card gluer Stitching station Stitching station 410 Transfer to the right Wire dispensing device Semko Thickness control / plus-minus 3 stitching heads Three-knife cutter Three-knife cutter 304 Knife 2 carbide knives Dsdpfx Aleca Dktsbocl MONICS Inserter Transfer belt between trimmer and main product feeder Inserter Biliner In-line main product feeder 6 insert feeders Lay-down unit Cross feeder Rapido

Year of construction: 1994, condition: good (used), Built in: 1994 Size: 330 x 260 mm Speed: 18.000 c/h Equipment: gathering chain & feeder: • 8 station gathering track & chain • 6 single bases Dodpfedyk Rcox Albecl • 1 double base • 6 feeders 343 • 1 cover folder feeder 344 stitching unit & trimmer: • stitching unit 301 • 2 stitching heads • three knife trimmer 304 • copy control

Year of construction: 1996, condition: ready for operation (used), Built in 1996 Size max 480 x 320 mm Size untrimmed max 480 x 320 mm min 153 x 108 mm Size trimmed max 475 x 300 mm min 148 x 105 mm Product thickness max 13 mm Speed max 13.000 c/h Equipment gathering chain & feeder • 6 station gathering track & chain • 5 feeders 370 • 1 cover folder feeder stitching unit • stitching unit 390 • wire unwind device • thickness control/ plus-minus • 2 stitching heads three knife trimmer • three knife trimmer 360 knives Dcjdpeizi Ivsfx Albel • 2 sets of knives

Year of construction: 2003, condition: ready for operation (used), Built in: 2003 Size max: 480 x 320 mm Sizes untrimmed high folio lap: max 480 x 320 mm min 105 x 115 mm with Accessories: 90 x 80 mm Sizes untrimmed low folio lap: max 480 x 300 mm min 105 x 125 mm Mechanical Speed: 21" chain pitch 12.000 c/h Power consumption: max 11,0 kW Compressed air (to be supplied by purchaser): depending on configuration 6 bar working hours: 21466 thsd.h Equipment gathering chain & feeder • 6 station gathering track & chain • 4 flat pile feeders 370 • 1 cover folder feeder 1529 stitching unit • stitching unit 380 • transfer left • wire unwind device • thickness control/ plus-minus • 2 stitching heads HK 75 three knife trimmer • three knife trimmer 449 knives • 2 sets of knives standards • 1 set of operator manuals • 1set of electrical diagrams • 1 spare part catalogue • 1 set of tools • further information • location: D-Helmstedt • machine can be tested under power • cleaned & checked available • immediately Djdpfeizi Syox Albocl • additional feeders • double production device • small book attachment • compensating stacker • card gluer • Inline inserting machine with 2 up to 10 stations

Year of construction: 1997, condition: good (used), Machine number: 91.05666 Built in: 1997 Size: max 480 x 320 mm Size untrimmed: max 480 x 320 mm, min 153 x 108 mm Size trimmed: max 475 x 300 mm, min 148 x 105 mm Product thickness: max 13 mm Speed: max 13.000 c/h Number of heads: max 6 Equipment gathering chain & feeder • 5 station gathering track & chain • 4 feeders 370 • 1 cover folder feeder 1529 stitching unit • stitching unit 390 Dodpsk D Almsfx Albscl • wire unwind device • thickness control/ plus-minus • 2 stitching heads three knife trimmer • three knife trimmer 360 knives • 2 sets of knives • Doppelnutzeneinrichtung • Betriebsstunden: 34.088h

Condition: good (used), functionality: fully functional, Size: max 340 x 260 mm; min 90 x 115 mm Size (without lap): max 340 x 250 mm; min 90 x 115 mm lap: max 15 mm folio lap: min 6 mm low folio lap: min 8 mm Product size, stitching unit: max 340 x 260 mm; min 210 x 155 mm booklet thickness: max 6 mm Mechanical speed 1:1: max 25,000 t/h Mechanical speed 1:2: max 30,000 t/h equipment gathering chain & feeder - 8 station gathering track - 8 single base - 6 feeders 416 - product gluer 423 stitching unit - stitching unit 430 - 15" inch chain pitch - wire unwind device - thickness control/ plus-minus - 4 stitching heads three knife trimmer - three knife trimmer 426 knives - 2 sets of knives delivery - compensating stacker Robusto optional Equipment: --- not included --- Dsdpfx Alou S Ncbebjcl - crane system - bundle feeder - print roll feeder - additional stations - card gluer - div. conveyor belts - compensating stacker - strapping machines - wrapping machines - palletizer

Condition: good (used), Year of construction: 2012, Built in 2012 Size max 330 x 250 mm Size trimmed max 330 x 250 mm min 200 x 148 mm Size trimmed without lap max 340 x 260 mm booklet thickness 4-6 mm Mechanical Speed max 22.000 t/h Equipment crane system • 2 Bundle clamps gathering chain & feeders • 8 stations gathering chain • 6 feeders 0416.0440 • 6 streamfeeders 3738 with extensions • 1 Card gluer 423 • 1 Semko • 3 ELTEX static devices stitching unit 410.0425 • 2 stitching heads three knife trimmer • three knife trimmer 304 knives • 2 sets of knives controls • automatic selfajusting calipers ASAC • signature reading system ASIR • automatic make ready system Amrys Pick up station with chain and delivery station Inserter • Müller Martini Integro • 4 stations • reject unit • transfer unit Addressing unit Dedpfetryhfjx Albocl • Sitma 930-A Stacker • Müller Martini Robusto 451 Electrostatic Blocker • Müller Martini 457 Condition Very good working condition can been tested

Condition: ready for operation (used), Size: max 480 x 325 mm Size untrimmed with lap: max 480 x 325 mm min 90 x 115 mm Size untrimmed without lap: max 440 x 300 mm min 158 x 115 mm Size trimmed with lap: max 470 x 320 mm min 148 x 105 mm Size trimmed without lap: max 430 x 295 mm min 148 x 105 mm Speed: max 14.000 c/h Dcsdpfx Asd N D Nwelbel Power requirements: 11-18 kW (220/380V, 50Hz) Equipment gathering chain & feeder: • 5 station gathering track & chain three knife trimmer: • three knife trimmer 251 • compensating stacker CS-20

Year of construction: 2007, condition: good (used), Technical Data: Size: max 480 x 320 mm Sizes untrimmed high folio lap: max 480 x 320 mm min 105 x 115 mm with Accessories 90 x 80 mm Sizes untrimmed low folio lap: Dcjdpfxsmn Sk Ne Albol max 480 x 300 mm min 105 x 125 mm Mechanical Speed: 21" chain pitch 14.000 c/h Power consumption: max 11 kW Pressure-vacuum pump depending on configuration Compressed air (to be supplied by purchaser) depending on configuration 6 bar Equipment: Gathering chain & feeder: · 8 Station gathering track Feeders: · 5 Feeders 370 Cover folder feeder: · 1 Cover folder feeder 1529 Stitching unit: · 1 Stitching unit 390 · 1 18" inch chain pitch · 1 Transfer right · 1 Wire unwind device · 1 Thickness control/ plus-minus · 1 Oblique sheet control Stitching heads: · 2 Stitching heads HK 75 Three knife trimmer: · 1 Three knife trimmer 449 Knifes: · 2 Sets of knives Standards: · Standard accessories Condition: · working condition Availability: · immediately · Machine can be visited in production Optional equipment (not included!): · additional feeders · double production device · compensating stacker · card gluer · inserting machine · inkjet systems All technical data is for information purposes only! Although the technical information is mostly taken from manufacturers documents, no guarantee can be given for correctness due to e.g. undocumented changes of the equipment. By no means are these values intended to be binding or part of the contract.

Condition: ready for operation (used), Size max 480 x 320 mm Size untrimmed with lap max 480 x 320 mm Size untrimmed without lap max 440 x 290 mm Size trimmed with lap max 470 x 300 mm Size trimmed without lap max 430 x 295 mm min 148 x 75 mm Speed max 10.000 c/h Equipment stitching unit • stitching unit 321 • thickness control/ plus-minus • 2 stitching heads HK 75 three knife trimmer • three knife trimmer 890 Dedpfx Alsd Ir Izjbscl knives • 2 sets of knives

Year of construction: 1997, condition: ready for operation (used), 25276F Müller Martini Prima Saddle stitchers with feeder and trimmer Machine number 91.06606 Built in 1997 Size max 480 x 320 mm Size untrimmed max 480 x 320 mm min 153 x 108 mm Size trimmed max 475 x 300 mm min 148 x 105 mm Product thickness max 13 mm Speed max 13.000 c/h Dcodsd Nvtpjpfx Albjl Number of heads max 6 Equipment gathering chain & feeder • 9 station gathering track & chain • 8 feeders 370 • 1 cover folder feeder 1529 stitching unit • semko • 2 stitching heads three knife trimmer • three knife trimmer 360 knives • 2 sets of knives