Used Robopac Semi-Automatic Horizontal Stretch Wrapper for sale (32,372)

Condition: as good as new (ex-display), Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!! CAN SHARPEN MAX 406MM DIAMETER CUTTERS !!! The G-716 Semi-automatic Cutterhead Grinder is used to sharpen 178mm to 406mm diameter eased edge, milled to pattern, and fingerjoint cutterheads. Worktable traversing is automatic and has adjustable stops. Cutterhead indexing is manual. Each knife is held against a positive stop while being ground !!! No Index Plate To Change No index plate to change when working with heads with different numbers of knives. The use of an index plate assumes that the knives and head separations are uniform throughout, which is often not the case. If the height of the knife is high or low, then the front face of the knife will vary from knife to knife making the task of grinding difficult. The one constant is the back face of the knife, therefore the use of an indexing stop against the back face will provide for accurate indexing regardless of the irregularities in the knives and head slots. Head Indexing and Wheel Feed: Manual Minimum / Maximum Diameter Cutterhead: 7″ Min./16″Max. 178mm Min./ 406mm Max. Worktable Feed: Air / Oil Travel (maximum): 12″ 305mm. Adjustable Limits: Proximity Switch Speed: Fully Adjustable Index Method: Manual index after each knife is ground. Grinding Spindle: 1-1/2 HP Wash Down Duty TEFC Motor 3600 RPM, Dual ABEC 7 Precision Bearings, with Sealed Lubrication. 8″ (203mm)Diameter Grinding Wheel (9″ 229mm Diameter Max.) Coolant System: 15 Gallon Tank with Casters, Sediment Tray Full View Sight Glass, 5 GPM Pump (120VAC) Wash Down Hose Included Specifications Grinds 7″ to 16″ diameter eased edge, milled to pattern, and finger joint heads Automatic traversing worktable with adjustable travel limits Manual indexing of knives against a positive stop with grinding position pneumatic brake allowing precision indexing without the need of an index plate High precision 1-1/2 HP grinding spindle with sealed lubrication Recirculating adjustable flow flooded coolant system with wash down hose Fully enclosed grinding chamber with viewing windows and task light Grinding wheel feed allows unattended operation. New Proscale. Dedpfx Aboq Dzi Te Tskp

Condition: like new (used), Year of construction: 2024, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 2024-A00280, feed length X-axis: 10,000 mm, feed length Y-axis: 4,000 mm, feed length Z-axis: 100 mm, warranty duration: 12 months, total length: 11,000 mm, total height: 2,000 mm, total width: 4,500 mm, overall weight: 2,500 kg, type of input current: three-phase, Equipment: CE marking, Semi-automatic framing machine for timber frame walls, max. 4000x10000mm - Max. stud height: 220mm - 3 nailing positions along the height - 2 BEA nail guns, strip-fed nails - Wall length production: 1000mm to 10000mm - Wall width production: 600mm to 4000mm - Wall height production: 120mm to 220mm - 2 independent nailing stations (no beams) - HIWIN rail and guide system - LENZE motor Dkodpfx Abezap I As Tsp - LENZE PLC - Human-Machine Interface (HMI) - Control panel - Manufacturer's warranty: 12 months - Installation and commissioning possible

Condition: new, Semi-automatic miter saw SALVAMAC LEGEND 500 Cutting height max. 125mm Introductory special price Includes: - Semi-automatic miter saw SALVAMAC LEGEND 500 Cutting height max. 125mm SAFE - SOLID - FAST The compact, simple, robust and innovative machine guarantees maximum safety, flexibility and reliability. Standard accessories: - Automatic protection and pressure device - Ergonomically positioned 2-hand control - Protective shield, rigid - incl. HM saw blade 500 mm Z = 108 Technical data: Maximum cutting area: 220 x 125 / 260 x 100 / 285 x 80 / 310 x 50 mm Saw motor: 5.5 kW Saw blade diameter: 500 mm Rotation speed: 2,800 rpm. Compressed air: max. 8 bar Air consumption per cycle: 5 Nl Extraction nozzle: 1 x 120 mm / 1 x 100 mm Voltage: 400 V / 50 Hz / 3 Ph. Working height: 900 mm +/- 20 mm Minimum distance between stop (left side) and saw blade: 70 mm Minimum distance between stop (right side) and saw blade: 520 mm Minimum distance between 2 stops (optional): 60 mm Note: Basic price without roller conveyors. When setting up the saw, a support table or roller conveyor must be installed at least 1 m to the left and 1 m to the right of the saw. Included: - Roller conveyor without scale on the right, per meter Roller conveyor 320mm wide, with 100mm stop ruler and galvanized rollers, load capacity 230 kg, diameter 60 mm, distance 250 mm, right of the saw, price per meter Note: 1 m and 2 m long roller conveyors can be retrofitted. Include: - Roller conveyor with stop ruler and scale on the left, per meter Roller conveyor 320mm wide, with 100mm stop ruler and galvanized rollers, load capacity 230 kg, Dodpfx Abjvtrkio Tjkp diameter 60 mm, distance 250 mm, right of the saw, price per meter Note: The stop must be ordered separately. 1 m and 2 m long roller conveyors can be retrofitted. Include: - Pneumatically pivoting stop with 200 mm length - new exhibition machine -

Condition: good (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 03-2018, For sale: perfectly preserved and fully operational semi-automatic flexo printing machine for corrugated board, manufactured by the renowned EMproject 89. Built in 2018, this machine is designed for reliable and precise 2-color printing on cardboard packaging. The machine is currently connected to power, fully functional, and ready for work. It is ideal for printing logos, barcodes, and graphics on shipping, industrial, or transport boxes in a single pass. Key Technical Specifications: Manufacturer: EMproject 89 (Serbia) Dedpfx Abezilvgj Tjkp Model: FLEXO PRINTER MS-1700/1400 Year of Manufacture: 03 / 2018 Number of Colors: 2 (Two-color printing) Maximum Cardboard Format: 1700 mm x 1400 mm Voltage: 220 V Condition: Fully operational, well-maintained, testing possible before purchase. The machine is located in Slovenia (Celje region). The buyer is responsible for dismantling and transport. Price is negotiable for serious buyers upon inspection. We also have other cardboard manufacturing equipment available printing machine (Flexo Printer EMproject 89), automatic paper slitting and rewinding machine YYS-I ( 2023), automatic folder gluer machine for corrugated boxes by HEBEI SOOME built in 2019, fully automatic folder gluer with bottom-locking capability by HEBEI SOOME ( 2024) and semi-automatic folder gluer machine for corrugated boxes, manufactured by HEBEI SOOME (2021) are also available for sale.

Condition: excellent (used), Year of construction: 2002, operating hours: 20,000 h, functionality: fully functional, working width: 1,700 mm, type of input current: three-phase, total width: 4,500 mm, total length: 8,030 mm, total height: 2,150 mm, power of the servo motor: 20 W, overall weight: 34,000 kg, input voltage: 380 V, Semi-automatic die-cutting machine. Manual sheet feeding, die-cutting section, waste removal section, and palletizing. Dkedpfx Aezidhbjb Top

Year of construction: 2025, condition: excellent (used), Fully automatic pallet wrapping machine with film pre-stretching Inventory No. 3879 Manufacturer: Robopac Type: Masterplat Plus PGS * Year of manufacture: 2025 * Turntable positioning via fixed stop Dkodszh Rbropfx Ab Top * Number of top and bottom wraps * Turntable diameter: 1650 mm * Max. wrapping height: approx. 2200 mm * Weight: approx. 420 kg * Suitable for Euro pallets and block pallets!!! * In very good condition

Condition: new, Year of construction: 2023, REF: MM5675 Vigo semi-automatic T-capping machine. Suitable for applying T-caps to 70cl and 100cl bottles.  Manufacturer - Vigo Dksdpfx Abjr I Ddke Tjp Model - PG2010/TV SEMIAUTOMAT T-CAPPER.  Date of manufacture - 2023. Electric supply - 220 V / 50 hz / 1 phase. Supplied with manual, 1 x T stop corker adjustments for 2 x cap types (miniature and normal), 1 x Head and down channel for different “T” caps sizes and castors.  Purchased brand new in 2023 but never used.

Condition: excellent (used), I am offering a SANPACK FIX pallet wrapping machine designed for securing loads with stretch film during storage and transport. Technical specifications: Manufacturer: Sanpack Model: SANPACK FIX Power supply: 3×380V + N + PE Frequency: 50 Hz Power: 0.55 kW Rated current: 2.0 A Protection rating: IP54 Advantages: Dodpfozf Rkusx Ab Tekp Rotating pallet table Stretch film holder Robust industrial construction Control panel operation Ideal for warehouses, production facilities, and logistics centers Visual condition matches the photos. The machine is used.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Equipment: documentation/manual, Semi-automatic desiccant filler Suitable for aluminum, stainless steel and plastic profiles More technical information can be found attached as Tech. data file In very good and clean condition Dkjdpozhnitjfx Ab Tsp Good working order, tested As is Available immediately

Condition: new, Year of construction: 2026, Powerful, reliable and modern semi-automatic band saw for metal with automatic arm raising and lowering. The arm is rotational in both ways. The machine is fantastic for ironworking, e.g. cutting tubes and profiles. Product features CORMAK S-200RH band saw is by default equipped with automatic arm lowering and raising as well as with a precise arm height regulator. Due to an automatic hydraulic damper, the manual handling of the machine has been simplified to feed and clamping the cut material in a vice. The arm made of uniform iron casting, together with a refined, solid and stable construction, ensure S-200R's exceptional rigidity, resulting in failure-free handling and high cutting precision. The innovativeness and production of semi-automatic and automatic series "CORMAK-PREMIUM LINE" band saws, compliant with the norms and standards consistent with ISO:910001 and ISO:140001 certificates, warrant safety, quality and reliability of the product. M3V motors from ABB, a renowned worldwide manufacturer, warrant long-term reliability. As an official and the only representative on the Polish market, we assure that the product is original and provide professional, customised warranty and post-warranty services. Technical data Type - semi-automatic Arm raising and lowering - hydraulic with smooth arm lowering control Band speed - 36/70 mm/min Angled cutting - left to 45°, right to 60° Vice - hydraulic Minimum cutting diameter - Ø 5 mm Minimum material length in vice - 30 mm Vice base height - 780 mm Cutting band dimensions - 27×0.9×2910 mm Total power - 2.1 kW Dimensions (LxWxH) - 1600×800×1400 mm Weight - 530 kg Angle 0º -----ø250 320×240 240×240 45º L ø200 220×120 190×190 45º P ø220 235×120 210×210 60º P ø110 155×110 100×100 Default equipment Control panel on separate component Built-in hydraulic unit Hydraulic control of arm motion (up – down) with possibility of smooth lowering speed control Arm position memory function (arm returns to a defined height after cutting) Cutting at angles of L/R 45° - 0° - 45° - 60° Djdpsi D D A Ssfx Ab Tekp Brush for cleaning band Cooling system Bi-metal band saw EC Declaration of Conformity User manual The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, total length: 7,000 mm, total height: 2,200 mm, total width: 2,350 mm, input voltage: 380 V, overall weight: 1,700 kg, compressed air connection: 6 bar, warranty duration: 12 months, film width: 250 mm, power: 5.2 kW (7.07 HP), product height (max.): 850 mm, product height (min.): 50 mm, product length (min.): 650 mm, EDDA Olympia 150s BN | Automatic "Total Closing" Bubble Wrap & Stretch Wrapping Machine The Olympia 150s BN is a premium, fully automatic horizontal orbital wrapping machine featuring the innovative Total Closing Series technology. Engineered specifically for the furniture, door, panel, and wood-processing industries, it combines Bubble Wrap (Air Bubble Film) and Stretch Film application in a single inline process to provide 360° total protection for high-value or fragile products. Advanced Total Closing & Dual-Layer Protection: Simultaneous Dual Coating: Applies a protective layer of bubble wrap followed immediately by an industrial stretch film layer, ensuring maximum cushioning against impacts and scratches. Complete 360° Sealing: Delivers a fully enclosed, airtight packaging result that safely protects products from dust, moisture, and transport damage. Optimized Material Efficiency: Precise mechanical/electronic tension control guarantees uniform wrapping while reducing film and bubble wrap consumption to the minimum. Premium Automation & High-End Components: Fully Automated Inline Cycle: Equipped with heavy-duty automatic film clamping, cutting, and welding units—completely removing manual operator dependency. Integrated Motorized Conveyors: Features driven inlet and outlet conveyor belts that sync perfectly with your factory line for smooth product transit. Pneumatic Top Press Rollers: Adjustable pneumatic vertical hold-down rollers secure the product firmly during high-speed rotation, preventing shifts. Intuitive PLC Touch Screen: Allows instant setup of wrapping parameters, ring rotation speed, and custom overlap configurations via a user-friendly interface. Dkjdsy D Nzlopfx Ab Tep Industrial Heavy-Duty Build: Engineered with a balanced ring mechanism and rigid frame for exceptionally quiet, low-vibration, continuous 24/7 operations. For exact ring diameter dimensions, layout drawings, customized technical inquiries, or detailed catalog pricing, please send us an inquiry directly through Machineseeker.

Condition: used, Year of construction: 2011, functionality: fully functional, power: 3.73 kW (5.07 HP), cutting height (max.): 440 mm, cutting width (max.): 600 mm, pivoting range: 60 °, total height: 1,700 mm, total length: 2,900 mm, total width: 1,300 mm, overall weight: 1,320 kg, Equipment: CE marking, We offer this used semi-automatic band saw TOP-PORĘBA BMT460DSA, year of manufacture 2011. Motor power: 5 HP Cutting diameter at 90° (round cross-section): 460 mm Dedpsyv Ai Hjfx Ab Tskp Cutting dimensions at 90° (square): 460 x 460 mm Cutting dimensions at 90° (rectangle): 440 x 600 mm Cutting diameter at 45° (round cross-section): 445 mm Cutting dimensions at 45° (square): 445 x 445 mm Cutting diameter at 60° (round cross-section): 295 mm Cutting dimensions at 60° (square): 295 x 295 mm Blade dimensions: 41 x 1.3 x 5330 mm Machine weight: 1320 kg If you have any questions or require additional information, please send us a message or contact us by email.

Condition: used, Year of construction: 1981, cutting diameter 320 mm saw band length 4670 mm cutting width 580 mm total power requirement 7,4 kW weight of the machine ca. 3 t Sawing range, circular, max. 100 - 320 mm vertical, max. 100/100 x 320/460 mm Length of cut, min./max. 0 - 580 mm Distance from column to saw band, max. 690 mm Cutting speed, infinitely variable 16 - 160 m/min Dimensions of saw band, length x Ø approx. 4,670 x 38 mm Length of remaining pieces, automatic/single cut 100/10 mm Saw blade drive, approx. 4.4 kW Total electrical load, approx. 7.4 kW - 380 V - 50 Hz Weight, approx. 3,000 kg Accessories / Special Features: Dkodpfx Ajt Hwrnob Tep * Infinitely variable speeds of saw blade motor via servo motor and STOEBER drive. Display of cutting speed on control panel. * Infinitely variable settings of sawing feed with display of the current cutting speed. * Workpiece counter: Number of workpieces can be preset. Selection switch for single cuts / multiple cuts. * Display for band tension and cutting feed. * Automatic motor-driven material feed, controlled by a positioning processor, Model PP 160, with input of the appropriate lengths using a roll conveyor approx. 1,500 mm, with enlargement approx. 2,000 mm. And with a stable roll conveyor for the exterior area, 3,500 mm. * Built-in chip conveyor with coolant device. * Built-on switch cabinet. Condition : Good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. We have a selection of saws on stock. Please let us know your requirements.

Year of construction: 2026, condition: new, functionality: fully functional, New machine 24 months warranty Features: + very good price-performance ratio + already standard: mobile machine, ideal for quick floor cleaning + stainless steel dividing knife + coated knife head + even division of the dough + excellent rounding of the dough pieces + ergonomic knife cleaning position (head can be swivelled 90 degrees forward) + easy and quick adjustment of the working height + side holder for the working plate, readily accessible STANDARD equipment: + 3 working plates included General technical data: Power: 0.75 kW Connection values: 400V - 3Ph - 50Hz Fuse: 16A CEE plug Dimensions: 60 x 70 x 152 cm (W x D x H) Height with lever: 220 cm Net weight: 340 kg Size 4-30: Number of pieces: 30 dough pieces Piece weight: 40 - 120 grams (dough/product dependent) Dough input: 1,200 - 3,600 grams (dough/product dependent) Dksdpsivdngjfx Ab Tjp optionally available: - additional working plates Surcharge: €115.00 net / piece

Year of construction: 2026, condition: new, functionality: fully functional, New machine 24 months warranty Features: + Very good price-performance ratio + Already included as standard: mobile machine, ideal for quick dough rounding + Dividing blade made of stainless steel + Coated dividing head Djdpfx Abshydmhe Tokp + Uniform division of the dough + Excellent rounding of the dough pieces + Ergonomic blade cleaning position (head can be swiveled 90 degrees forward) + Easy and quick adjustment of the rounding chamber height + Lateral holder for rounding plates, readily accessible STANDARD equipment: + 3 rounding plates included General technical data: Power: 0.75 kW Connection values: 400V - 3-phase - 50Hz Protection: 16A-CEE plug Dimensions: 60 x 70 x 152 cm (W x D x H) Height with lever: 220 cm Net weight: 340 kg Size 3-30: Number of pieces: 30 dough pieces Piece weight: 25 - 80 grams (depending on dough/product) Dough input: 750 - 2,400 grams (depending on dough/product) Optionally available: - Additional rounding plates Surcharge: €115.00 net/piece

Year of construction: 2026, condition: new, functionality: fully functional, New machine 24 months warranty Features: + very good price-performance ratio Djdpfx Abeivdnnj Tskp + already included as standard: mobile machine, ideal for quick dough processing + cutting blade made of stainless steel + coated cutting head + uniform division of the dough + excellent rounding of the dough pieces + ergonomic knife cleaning position (head can be swivelled 90 degrees forward) + easy and quick adjustment of the processing chamber height + side holder for the processing plate, readily accessible STANDARD equipment: + 3 processing plates included General technical data: Power: 0.75 kW Connection values: 400V - 3Ph - 50Hz Protection: 16A-CEE plug Dimensions: 60 x 70 x 152 cm (W x D x H) Height with lever: 220 cm Net weight: 340 kg Size 4-30: Number of pieces: 14 dough pieces Piece weight: 130 - 400 grams (depending on dough/product) Dough input: 1,820 - 5,600 grams (depending on dough/product) Optionally available: - additional processing plates Surcharge: €115.00 net / piece

Condition: used, Year of construction: 2004, cutting range 260 x 260 mm cutting speed 20 - 110 m/min weight approx. 1.700 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if specifically stated in the additional information. Dsdezczhtspfx Ab Tokp Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 2005, cutting diameter 1000 mm saw band length . mm cutting width . mm main drive motor . kW cutting range 1000x1000 mm total power requirement . KVA weight of the machine ca. . t Bandsaw filling machine The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. Djdpfxszfwuge Ab Tokp About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: new, Thomas Super Trad 301 So Easy – Semi-automatic metal bandsaw Promotional price: €9,400 instead of €11,100, excluding VAT. Capacity, round: 255 mm - The SO EASY saw enables a complete cutting cycle without constant operator presence thanks to the hydraulic control system for lowering the saw frame. - Hydraulic vice - Limit switch to adjust the saw frame return position directly above the material to be cut - Selector switch to switch to MANUAL cutting mode with a button for quick access to the material to be cut - Central control panel on the front of the machine with a bright alarm system - Automation is controlled via a safety relay - Highly efficient hydraulic pump and low energy consumption - Practical and reliable for all cutting requirements of medium-sized ferrous materials - Large, round "plateau" work table that rotates with the blade during miter cuts, guaranteeing excellent support for the material to be cut. This system prevents the saw blade from cutting the work table, as is the case with conventional bandsaws. - Solid cast iron vice with handwheel and quick-release lever - The vice is equipped with a practical handle for quick movements and is mounted on a rail to allow for lateral movement. - Cuts from 0° to 60° to the right and 45° to the left are possible - Saw blade rotation with 2 electric speeds - Saw blade tension adjustment via handwheel and safety microswitch in case of blade breakage or insufficient blade tension - Coolant electric pump - Saw blade cleaning brush FEATURES - Saw frame, vice and plateau made of cast iron - Precision saw blade guide with carbide pads and adjustable rollers - Gears immersed in oil STANDARD EQUIPMENT - Adjustable stop with millimeter scale - Hydraulic vice - Material support bracket - Bimetal M42 saw blade 2750 x 27 x 0.9 mm - Set of service keys - CE certification and operating and maintenance manual OPTIONAL - Roller conveyor loading side (2 m) - Roller conveyor unloading side with stop (2 m) - Blada minimal lubrication system - Start pedal Technical data Dkodezcpkpspfx Ab Top - Capacity, round 0°: 255 mm - Capacity, round < 45°: 160 mm - Capacity, round 45° >: 200 mm - Capacity, round 60° >: 110 mm - Capacity, square 0°: 250 mm - Capacity, square < 45°: 160 mm - Capacity, square 45° >: 190 mm - Capacity, square 60° >: 110 mm - Capacity, rectangular 0°: 300 x 220 mm - Capacity, rectangular < 45°: 190 x 100 - 150 x 170 mm - Capacity, rectangular 45° >: 190 x 170 mm - Capacity, rectangular 60° >: 110 x 130 mm - Saw blade dimensions: 2750 x 27 x 0.9 mm - Saw blade speed: 33/66 m/min - Vice clamping width: 305 mm - Saw frame inclination: 30° - Working height: 940 mm - Gear reduction ratio: 40/1 - Flywheel diameter: 300 mm - 3-phase electric motor: 1.0 - 1.4 kW - Electric pump: 0.11 kW - Machine dimensions WxHxD: 800 x 1600 x 1800 mm - Machine weight: 440 kg

Year of construction: 2003, condition: used, cutting capacity - round 300 mm dimensions of saw-band 3320 x 27 x 0,9 mm Dsdpfsra Rrlox Ab Tskp cutting capacity - flat 330 x 260 mm cutting capacity - square 260 mm Control evolution work height max. 870 mm 40 / 80 mt/min weight of the machine ca. 1050 kg

Condition: used, Year of construction: 1985, cutting diameter 340 mm dimensions of saw-blade 4860 x 32 x 1,1 mm cutting range square 340 x 340 mm cutting speed 17 - 120 m/min drive motor 4 kW weight of the machine ca. 2,5 t dimensions ca. 2600 x 2600 x 1650 mm ncl. chip conveyor and chip tray Hydraulic bundle clamping device incl. electrical circuit diagrams the previous owner only sawed at one speed Adjustable cutting pressure valve HSS bimetal saw band Hydraulic material and saw band tensioning with electrical monitoring Automatic height adjustment of the saw frame Automatic adjustment of the movable band guide arm Electrical piece counter Dksdpewyfa Aofx Ab Tjp Digital display of the dimension preselection Constant, hydraulic clamping of the carbide band guides

Condition: used, Year of construction: 1997, cutting diameter 520 mm saw band length 7239 mm cutting range square 520 x 520 mm feed length 500 mm feed length 4500 mm cutting length min. 6 mm 10/100 mm cutting speed 20 - 130 m/min dimensions of saw-band 7239 x 50 x 1,3 mm weight of the machine ca. 4,2 t dimensions 2300 x 3420 x 2385 m Control MINIPOS 807 CNC control Minipos 807 Dkedpfxexfwd Io Ab Tep Special accessories: - Coolant device - Chip conveyor - Removal roller conveyor - Standard jaws

Condition: new, Semi-automatic band saw for cutting medium and large-sized solid bars and profiles, offering high performance and excellent cutting accuracy. The robust structure provides the machine with the necessary rigidity and precision for the cutting unit. Band control with a motor driven by an inverter and a special gearbox with a bronze gear and a hardened and ground worm gear. Appropriately sized flywheels. Robust band guides made with sealed guide bearings and adjustable carbide inserts. Dkedpfsfh R Tusx Ab Tjp Band tension is achieved via an electromechanical device with a microswitch-controlled blade rotation. Safety device to prevent accidents on the flywheel cover and on the blade. Cutting thickness: 1.5 mm Cutting range: 60° left / 60° right Brush band cleaning device Hydraulic power unit motor: 0.37 kW Electric pump: 0.09 kW for band cooling Vise, jaw height: 250 mm Vise, jaw length: 200 mm Work table height: 760 mm Machine weight: 1250 kg / 12260 N

Condition: new, Semi-automatic band saw for cutting medium-sized solid bars and profiles, offering high performance and excellent cutting accuracy. The robust structure provides the machine with the necessary rigidity and precision for the cutting unit. Belt drive with a two-speed motor and a special gearbox with a bronze gear and a hardened and ground worm gear. Properly sized flywheels. Heavy-duty belt guides made with sealed guide bearings and adjustable carbide inserts. Belt tension achieved via an electromechanical device with a microswitch-controlled blade rotation. Dkjdpfofibd Tjx Ab Top Safety device to prevent accidents on the flywheel cover and on the blade. Cutting thickness: 1.5 mm. Cutting angle: 60° left, 60° right. Adjustable stop for making cuts of the same size. Brush-type belt cleaning device. Hydraulic power unit motor: 0.37 kW. Electric pump: 0.09 kW for belt cooling. Vise, jaw height: 200 mm. Vise, jaw length: 185 mm. Worktable height: 760 mm. Machine weight: 820 kg.

Condition: new, MACC 320 MS semi-automatic bandsaw New item – “CE” marked Technical data sheet attached. Available for immediate delivery, subject to prior sale. The key features of the machine (blade support rigidity, flywheel sizing, blade guide, blade tensioning) have been the subject of careful study in order to prevent blade yielding, increase durability, improve cutting linearity, and reduce cutting time. Vertical rotation on a spindle with adjustable tapered roller bearings, free of play. Blade drive with a two-speed motor and a special gearbox with a bronze gear and a hardened and ground worm gear. Flywheels sized appropriately. Robust blade guides made with sealed guide bearings and adjustable carbide inserts. Blade tension achieved via an electromechanical device with a microswitch-controlled blade rotation. Safety device to prevent accidents on the flywheel cover, the control knob, and the blade. Cutting thickness: 1.2 mm Cutting range: from 0 to 60° to the right Adjustable stop for cuts of the same size. 0.06 kW electric pump for blade cooling. Operation: Starting the cutting cycle via the start button; the machine: 1. closes the clamp and activates the blade motor 2. lowers the arm for cutting 3. the arm returns to its starting position 4. stops the blade motor 5. opens the clamp Dsdpfxefibfaj Ab Tjkp Manual cutting option available. ACCESSORIES AVAILABLE UPON REQUEST: Single-phase 69 m/min motor Variable speed drive from 20 to 90 m/min