Used Robland S510 for sale (81)

Condition: ready for operation (used), Year of construction: 2008, operating hours: 13,169 h, travel distance X-axis: 1,050 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL, controller model: Matrix Nexus, table width: 550 mm, table length: 1,300 mm, table load: 1,200 kg, overall weight: 6,920 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Mazak Vertical Center Nexus 510C-II was manufactured in 2008. It features an impressive X-axis travel of 1050 mm, Y-axis travel of 510 mm, and Z-axis travel of 510 mm. The machine includes a robust table size of 1300 x 550 mm and a maximum table load of 1200 kg. If you are looking to get high-quality machining capabilities, consider the Mazak Vertical Center Nexus 510C-II machine we have for sale. Contact us for further details. Nodezl S S Tjpfx Amysld - Control System: Mazatrol Matrix Nexus (with Mazak Voice Adviser)- Axis Travel X/Y/Z: 1050 / 510 / 510 mm- Table Dimensions: 1300 x 550 mm- Maximum Table Load: 1200 kg- Spindle Speed: Up to 12000 rpm- Spindle Details: Completely renewed in September 2025 by Mazak factory service (original replacement spindle cartridge, high-precision version, clamping force 10.1 kN, runout 0.002-0.005 mm)- Tool Taper: SK 40 / BT 40- Tool Magazine Capacity: 30 stations- Tool Changer Type: Double gripper changer- Rapid Traverse Rate: Up to 42 m/min- Total Power-On Time: 46722 hours (as of 07.07.2026)- Automatic Operation Time: 17776 hours- Cutting Time: 15817 hours- Pure Cutting Time: 13169 hours- Weight: Approx. 6920 kg- Power Supply: 3AC 380 V, 50/60 Hz, approx. 33.8 kVA- Control Circuit: AC100V, DC24V- Main Motor: Max. 47 A, 400 V- Included Accessories / Components:* Chip conveyor (chain conveyor) with discharge to chip container* Donaldson Torit DCE oil mist separator* Portable electronic handwheel* Coolant system with spray gun / compressed air gun* Machine vise (NC vise)* Approx. 100 SK 40 tool holders* Tilting chip container (green cart)* Worklight / interior lighting* Full enclosure- Renewed parts during 09/2025 service: Spindle cartridge, rotary joint, non-return valves, filters for air/lubricating oil, oil mist separator element Technical Specification Taper Size SK 40

Year of construction: 2023, condition: used, For inquiries regarding the attachment, please contact Mr. Herden at [phone number]. Westtech Woodcracker T4000 Telescopic Boom / incl. CS510 crane / in stock & immediately available / Year of manufacture: 2023 Price: €41,990.00 net / €49,968.10 gross Westtech T4000 Telescopic Boom - Working range up to (mm): 6,350 - Telescopic extension (mm): 4,000 - Self-weight (kg): 680 – 730 - Lifting moment from excavator kinematics (kNm): 92 - Permitted load capacity (retracted / extended in kg): 2,500 / 1,550 - Maximum pressing force (kg): 100 - Recommended flow rate for telescopic extension (l/min): 50 – 110 - Recommended flow rate auxiliary circuit (l/min): 30 – 40 - Recommended operating pressure for telescopic extension (bar): 250 - Service weight of carrier vehicle (t): 14 – 22 Westtech CS510 crane - Cutting diameter (mm): 540 - Grapple opening (mm): 1,270 - Self-weight (base - full equipment in kg): 370 – 500 - Recommended flow rate (l/min): 50 - 90 - Recommended operating pressure (bar): 200 – 280 Equipment: - Incl. auto-tilt function for crane - Incl. RTC 10-2 rotator - Incl. swivel joint with brake - Incl. transport box for CS510 crane Optional: Lehnhoff MS21 adapter plate incl. screws and mounting = €2,400.00 net Many more adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. In our warehouse, we have a very large selection of various Westtech products that are immediately available! Mr. Herden (Tel. [phone number]) will be happy to assist you. Upon request, we will also gladly provide you with a financing offer. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Furthermore, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Westtech Woodcracker program for you! Nedpfx Ajznrvksmysld Errors and prior sale excepted! Internal No.: 523028 / 523088 = Further information = New: No Part suitable for: Intended use forestry Please contact Marius Herden for further information.

Condition: ready for operation (used), Siemens 6ES5102-8MA01 CPU 102 central processing unit, serial number as shown in the photo, professionally and completely refurbished and tested, with a 12-month warranty. 100% functional. Scope of delivery as shown in the photos. The agreed-upon sales discounts do not apply to this item. Please inquire about the price separately. Nsdpji Ednwjfx Amyold

Condition: new, Year of construction: 2025, Laser source: Raycus or Max: 4/6/8/12 kW Laser head: 3D BOCI Control system: FSCUT 5000 A Chuck: 20-450 mm Loading/unloading: 12000 mm X/Y axes Positioning accuracy: ±0.05/1000 mm Repeatability: ±0.03/1000 mm Acceleration: 0.8g (m/s²) Rotational speed: 60 rpm Max. positioning speed: 60 m/min Max. weight of a tube: 1500 kg 1. Raycus 6000W laser source 2. BEVEL laser head 3. Welded frame DPL 4. Schneider electrical components 5. Helical rack KH 6. Techmech reducer 7. Yaskawa servomotor Nedpfsi Apfzex Amyold 8. SHAC guides 9. Integrated power control 10. FScut 5000 software 11. Integrated electrical cabinet 12. HANLI water chiller 13. Cantilever gantry axis-X FHBS 14. Automatic waste collection 15. Crawler-type automatic workpiece collection 16. Automatic support system 17. Loading frame 12000 mm 18. Unloading frame 12000 mm

Condition: good (used), PLC control, central module, RAM, CPU, central device -Manufacturer: Siemens, Central Controller Simatic S5-100U CPU 102 Nlodpfx Aewpgv Domyjd -Type: 6ES5 102-8MA02 -Memory module: 1x 6ES5 275-OLA15 / 1x without photo type designation -Quantity: 1x assembly available -Price: per piece -Dimensions: 130/90/H135 mm -Weight: 0.7 kg/piece

Condition: good (used), Incremental rotary encoder with solid shaft, absolute rotary encoder, encoder, rotary encoder, encoder, absolute rotary encoder, absolute encoder, function encoder, rotary indicator, resolver, rotary pulse generator, tachogenerator, incremental encoder -Manufacturer: Videojet, encoder rotary encoder -Type: NI58-0/5000EL.42IH-S -Item No.: 51Voltage: 10-30 V Nljdjqv Hp Hjpfx Amyod -Shaft: Ø 10 x 20 mm -Quantity: 1 encoder available -Dimensions: 230/230/H80 mm -Weight: 0.9 kg

Condition: good (used), PLC control, CPU, main memory, CPU, central unit Nledpfxeh A Scbe Amyed -Manufacturer: Siemens, central device Central Controller Simatic S5-100U CPU 102 -Type: 6ES5 102-8MA02 -Number: 2x module available -Price per piece -Dimensions: 130/90/H135 mm -Weight: 0.7 kg/pc.

Condition: used, PLC control, central module, memory, CPU, central device, positioning module -Manufacturer: Siemens, positioning module Simatic S5-100U CPU 102 -Type: 6ES5 266-8MA11 -Quantity: 1 piece available -Dimensions: 100/45/H135 mm -Weight: 0.3 kg Nlodeh Db Idjpfx Amysd

Condition: good (used), Limit switches, push buttons, safety switches, position switches -AC-12 10 A 230 V -AC-15 6 A 230 V Nsdpfeb A N Tgox Amyeld -DC-13 6 A 24 V Price: per piece Quantity: 5 available -Weight: 1 kg

Condition: used, PLC control, CPU, main memory, CPU, central unit -Manufacturer: Siemens, central device Central Controller Simatic -Type: Simatic S5 101U 6ES5 101-8UA13 -Dimensions: 260/115/H165 mm Nodshy Rp Ajpfx Amyold -Weight: 2.9 kg

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 03/1991, loading space length: 9,150 mm, loading space width: 2,500 mm, loading space height: 2,990 mm, total length: 13,700 mm, total width: 2,500 mm, total height: 4,000 mm, suspension: air, tire size: 265/70 R19.5, wheelbase: 9,110 mm, color: other, Year of construction: 1991, Equipment: tail-lift, Tailgate Plateau length: 510 cm = More information = Axle configuration Tyre size: 265/70 R19.5 Brakes: drum brakes Suspension: air suspension Rear axle 1: Double wheels; Max. axle load: 9000 kg Rear axle 2: Double wheels; Max. axle load: 9000 kg Rear axle 3: Double wheels; Max. axle load: 9000 kg Weights Empty weight: 7.700 kg Carrying capacity: 31.300 kg GVW: 39.000 kg Functional Nljdpfx Ameyxv Tdjyed Tail lift: Nooteboom, 35000 kg Height of cargo floor: 90 cm Condition Technical condition: very good Visual appearance: very good Identification Registration number: OB-72-PZ = Dealer information = For more photos see: Why you buy from Thomas Trucks? That choice is simple. Thomas Trucks is one of the independent trading companies worldwide in the field of used commercial vehicles. Here you can choose from an ever-changing stock of second hand trucks, tractors, trailers and trailers. Our offer includes all European brands, construction years and price ranges. Here you will always find a good vehicle for the right price! Thomas Trucks always has: - Sharp prices - Good service - Spacious, rapidly changing stock - Known quality - Decent business - We speak many languages - Accompaniment input and transport - (Export) license plate quickly arranged - Professional technical services - And more. Visit the website: and view our complete range and competitive offers We are open 6 days a week. Do you need help with exporting, importing, or shipping your vehicle? Contact our sales team. Selling your current vehicle to us is also possible. We do our best to display the data as accurately as possible, however no rights can be derived from this data We can also arrange financing for you within the Netherlands.

Condition: new, Siemens 6ES5101-8UC21 Simatic expansion module, type E, version 1, unused, in opened original packaging, 100% functional. Nljdpfx Amoi Edntsysd

Condition: used, Flaker Laska -Type: GFS 510 -Power: 18.5 kW -Capacity: up to 4000 kg/h -Operating temperature: up to -15°C -Block size: 500 x 300 mm -External dimensions: 1830 x 1900 x 2050 mm Nlodpfx Aszcpgdemyod -Power supply: 380V 50Hz 3Ph -Weight: approx. 1400 kg -Made of stainless steel -Condition: Used in very good condition, ready to work

Condition: used, mileage: 1,066,896 km, power: 300 kW (407.89 HP), first registration: 01/2008, fuel type: diesel, overall weight: 50,000 kg, axle configuration: > 3 axles, color: red, gearing type: automatic, Equipment: air conditioning, * JVC radio * Two-way radio * Reversing camera * Multifunction steering wheel * 2 seats ----* Cruise control * Differential lock * Steerable axles: 1, 2, 3, 5 * Hydraulically foldable side walls * Unladen weight: 18,740 kg Njdpjvhvadofx Amysld ----- Internal vehicle number: 8546 ---- Subject to errors & prior sale. WhatsApp support available! If you have questions about the vehicle or need further information, please feel free to write to us conveniently via WhatsApp WhatsApp WhatsApp

Condition: ready for operation (used), Year of construction: 2008, operating hours: 4,220 h, travel distance X-axis: 1,050 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL, controller model: Matrix Nexus, table width: 550 mm, table length: 1,300 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Mazak VERTICAL CENTER NEXUS 510C-II was manufactured in 2008. It features a Mazatrol Matrix Nexus control unit and has a total operating time of 17,659 hours. The machine is equipped with advanced software options, including high smoothing control and various machining cycles. If you are looking to get high-quality machining capabilities, consider the Mazak VERTICAL CENTER NEXUS 510C-II vertical machining centre we have for sale. Contact us for further details. - Total Operating Time: 17,659 hours 12 minutes 03 seconds (Recorded on 2026/02/19)- Automatic Cutting Time: 6,129 hours 38 minutes 37 seconds- Automatic Machining Time: 5,877 hours 48 minutes 01 seconds- Operating Time / Power On Time: 26,902 hours 54 minutes 33 seconds- Feed Rate Override Display: 50%- Feed Speed Display: 150 mm/min- Electrical Drives/Servo System: Mitsubishi Electric MDS series (400V system)- Additional System Interfaces: Renishaw Machine Interface MI12 (integrated inside electrical cabinet for probe system)- Safety Module: Mazak Safety Relay Module (QS-VMI100R-10)- Installed Options (Software/NC Options Enabled):* EIA / EIA 3D Comp. / EIA Herical Tap Cycle / EIA Pattern Cycle* High Smoothing Control* Spiral* Rotation* Geometric* Scaling* Ext-Data I/O* Inverse Time* Auto TLM* Polar Coordinates Input* Comparison Stop* G54.1* Sync. Mill Tapping / Sync. Main Sp. Tapping* Inch/MM Convert* G00 Slope Const.* Scale Feed Back* Variable 600 Sets* IC Card Running* Tilted Working Plane* Re-Thread* Pitch Error Comp.* Tap Retraction- Coolant/Hydraulic Accessories: External tank base with dual motor-pump units and filtration assembly (including a manual visual indicator pressure/bypass filter)- Extraction/Exhaust Accessories: Fitted with a flexible corrugated overhead extraction duct (mist/smoke extractor hose connection)- The machine is equipped with an IKZ and a 30-round magazine Technical Specification Nedpjy T Hbzsfx Amysld Through-spindle Coolant Yes

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 14,680 kg, maximum load weight: 35,320 kg, overall weight: 50,000 kg, axle configuration: 3 axles, loading space length: 10,300 mm, loading space width: 2,520 mm, loading space height: 600 mm, total length: 15,400 mm, total width: 2,550 mm, tire size: 235/75 R17,5", tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements. Chassis: Low-loader semi-trailer Steel welded construction, kingpin plate with 2 replaceable kingpins 24 tons, 2-speed landing gear, single-sided operation, with straight lower part, without stroke compensation Folding rear support 2x chock blocks with holder Aluminum side impact protection Quarter panel fenders in front of and behind the axle assembly with splash flaps behind each axle 1x storage box, w=2,350 mm x l=730 mm x h=640 mm, mounted crosswise at the front on the floor of the gooseneck, with 2 storage trays Extendable widening elements up to 3,000 mm (not in rear slope)(However, the track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for wooden planks on the gooseneck, at the front, crosswise Wooden planks 70 mm for widening to 3,000 mm Excavator arm recess starting above the rear axles to the rear, approx. 500 mm wide and approx. 230 mm deep Tie-down points: Low-loader 3 pairs of tie-down points, each 10 tons, at the front of the gooseneck, 8 pairs of tie-down points, each 10 tons, in the low bed, 3 pairs of tie-down rails in the wheel track area of the low bed, 3 pairs of tie-down points, each 10 tons, in the axle/rear area Axles + Suspension SAF drum brake axles Axle/chassis laser-measured, reducing tire wear and fuel consumption with steering axle Air suspension Wheels and tires 235 / 75 R 17.5 as chosen by the manufacturer Steel rims in twin arrangement, factory silver Braking system 2-line pneumatic braking system, color-coded lines for easy servicing Spring brake parking brake EBS, Electronic Braking System with EBS socket at the front, without connecting cable Note: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! 2 fail-safe coupling heads at the front, without connecting line with lift & lower valve, hold function in the lowered position + auto-reset function Axle load detection via EBS-CAN bus signal, for display on the display in the driver's cab, truck must be prepared accordingly, no truck installation (no calibrated scale) Vehicle - Driving stability system Trailer Info Center, for displaying vehicle data such as axle loads (no calibrated scale), mileage and diagnostic/system messages Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front in LED 2 white/red marker lights at the rear 2 x 7-pole fail-safe sockets at the front 1x additional LED work light at the rear 1x LED rotating beacon with holder, switched via parking lights 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Gooseneck with steel/diamond plate covering in the wheel track area with 70 mm softwood floor, in the wheel arch area steel/diamond plate covering, low bed on the left and right in the wheel track area can be hydraulically raised for entry, via truck auxiliary drive Rear slope with 70 mm softwood floor Low bed length approx. 6,300 mm Side walls Nledpoi Ri Hgofx Amyjd 25 mm aluminum hollow profile, 400 mm high, can be plugged into the front and side on the gooseneck Ramps Steel ramps 2,800 mm long, 750 mm wide Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown i

Condition: like new (used), functionality: fully functional, Dowel Hole Drilling and Inserting Machine SCHEER BS 5102-V The BS 5102-V is a powerful, electronically controlled machine designed for precise and efficient face-end drilling and accurate insertion of wooden dowels. It is ideally suited for industrial wood processing—especially in furniture and carcass production. Condition & Service: Condition: As new (completely overhauled & newly painted) Functionality: Fully operational Warranty: 12 months CE compliant / Dust-tested Main Technical Data & Features: Workpiece width: min. 60 mm / max. 1200 mm (Pendulum operation: max. 600 mm) Workpiece thickness: 15 – 60 mm Drilling depth: max. 45 mm Vertical stroke of the support: 7.5 – 50 mm Min. lateral drilling distance: 10 mm Drilling unit: 9,000 – 18,000 rpm (adjustable), 1.5 kW Drilling system: M10 external (Scheer system) Servo motor: 0.54 kW, max. 60 m/min feed rate Dowel size: 8 x 30 / 8 x 50 mm, DIN 68150 Form A Glue system: 1:1 diaphragm pump, max. 7 bar Glue container: spiral conveyor, 3.5 liter capacity Extraction connection: Ø 80 mm | Extraction airflow: 540 m³/h at 30 m/s Clamping cylinders: 4 short-stroke cylinders (Ø 63 mm), angular clamping Power supply: 400 V, 50 Hz Machine Construction & Operator Comfort: Controlled X-axis with machine frame as workpiece support X-support with linear guide and rack-and-pinion drive Servo drive for feed system Clamping portal with 4 adjustable clamping cylinders—controllable in 2 groups Stop rulers: left, right, and center on the table Drilling depth and dowel projection are adjustable directly on the support Offcut Unit & Safety Systems: Safety hood locking Lamella safety curtain Integrated extraction channels Control & Operation: PC with Siemens PLC controller User interface: WP-Studio—dialog-oriented programming Nodpfx Aounvg Tjmysld Operating system: Windows 10 Display: 17" color monitor Separate workpiece programs for left & right operating sides (mirrored possible) Glue quantity can be individually defined per program Network capable (LAN/WLAN), compatible with Windows, Linux, Mac, Novell Remote maintenance & software updates possible Optional Equipment: Y-axis: automatic adjustment of drilling and glue units Electronic glue monitoring: ensures controlled glue flow Additional drilling unit for surface-side drilling: • Drilling motor: 1.5 kW at 18,000 rpm • Drill feed: pneumatic • Drill stroke: max. 25 mm • Depth limit: via spindle & SIKO display • Drill distance from reference edge: 5 – 35 mm • Holder: M10 external, max. Ø 35 mm • Workpiece length: min. 70 / 90 mm Warranty & Reliability: We are convinced of the stability and manufacturing quality of our machines—that’s why you receive a 7-year warranty on the machine construction, especially on the supporting structure and guide mechanism. Excluded are electrical supply components as well as normal wear parts. Additionally, we provide a 1-year warranty on the complete machine (including control, hydraulics, pneumatics, etc.). Conclusion: This machine combines state-of-the-art control technology, high manufacturing quality, and user-friendly operation. Ideal for precise dowel hole drilling and automated dowel insertion—reliable and efficient for continuous operation. 📞 Contact us for an individual offer or to schedule a demonstration. Available from stock. Delivery, commissioning, and training available as options.

Condition: used, functionality: fully functional, mileage: 363,500 km, power: 375.1 kW (509.99 HP), first registration: 04/2022, tire size: 315/70, axle configuration: 2 axles, brakes: intarder, gearing type: automatic, emission class: euro6, Year of construction: 2022, Equipment: ABS, additional headlights, air conditioning, cruise control, fridge, parking heater, soot filter, spoiler, traction control, trailer coupling, Year 2022 Nsdpow Hxyiofx Amyeld Mileage 363,500 km Automatic gearbox ZF Intarder Double fuel tank Tyres 315/70 Spoiler, fenders, side skirts Double fridge box Double bunk PTO pre-installation

Condition: new, functionality: fully functional, grinding length: 1,000 mm, grinding width: 500 mm, total height: 2,400 mm, total length: 4,445 mm, total width: 2,100 mm, grinding wheel diameter: 355 mm, distance table to spindle center: 550 mm, grinding wheel width: 38 mm, spindle speed (max.): 1,450 rpm, overall weight: 5,800 kg, grinding spindle speed: 1,450 rpm, Table surface area: 1000 x 500 mm Maximum table load: 1000 kg (including magnetic clamping plate) Grinding spindle motor: 5.5 kW Guide system: Flat guides Machine weight: approx. 5800 kg Operation/Control: Servo-controlled vertical feed in the grinding cycle Nledpfx Ascm Axusmyjd Electric transverse movement with programmable reversing points via the control panel Electronic handwheel Mobile control panel with 7” color screen and touch function Programmable grinding cycles in 4 variants for the vertical axis Workpiece memory, 10 grinding cycles for quick access Includes the following standard accessories: Full enclosure, open at the top Separate hydraulic system Continuously adjustable table longitudinal movement with automatic table reversing Vertical rapid traverse for the grinding head: 300 mm/min (jog speed) Automatic, continuously adjustable vertical feed from 0.001 - 0.025 mm via servo motor Adjustable magnet including clamping force monitoring Automatic central lubrication with visual inspection 1 balancing device for grinding wheels, including balancing arbor 1 grinding wheel flange for grinding wheel bore 127 mm 1 grinding wheel 355 x 38.1 x 127 mm 1 table scraper 1 rear splash guard 1 set of leveling screws for alignment and machine feet 1 operating manual including electrical wiring diagram 1 acceptance test report for machine geometry and grinding spindle according to DIN 8632 Optional: Fine-pole electro-magnetic clamping plate 1000 x 500 mm Coolant tank (max. 135 L) with magnetic separator and paper band filter Manual scraper with hand lever

Condition: excellent (used), mileage: 746,370 km, power: 375 kW (509.86 HP), first registration: 06/2018, fuel type: diesel, fuel: diesel, brakes: retarder, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2018, Equipment: retarder, = Additional options and accessories = - Intarder = Remarks = WJME62RUX0C395922 = More information = Number of cylinders: 6 Empty weight: 14.555 kg Carrying capacity: 11.455 kg GVW: 26.000 kg Technical condition: very good Visual appearance: very good Registration number: EY835HY = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Nedpfxeymp Dds Amyjld Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: used, Westtech Woodcracker CS510 Crane Grapple Saw for Cardanic Mounting Available immediately Specifications: - Cutting diameter: 540 mm - Gripper opening width: 1,270 mm - Own weight (with full equipment): 360–400 kg - Recommended oil flow rate: 50–110 l/min - Recommended operating pressure: 200–280 bar - Saw chain lubrication: Oil We are an official Westtech Woodcracker sales and service partner, Magni telehandler sales and service partner, JCB construction machinery sales and service partner, Mercedes-Benz service partner, Iveco service partner, and with 800 used vehicles, one of the largest commercial vehicle dealers in Germany. Nlodpfx Ajyfu Eqsmyod We provide the complete range of Westtech Woodcracker products for you! Rental possible = More information = Condition: New Please contact Tobias Ebert for further details.

Condition: used, Year of construction: 2016, operating hours: 5,215 h, load capacity: 10,000 kg, fuel type: electric, battery voltage: 48 V, front tire type: superelastic tires (non-marking), overall weight: 2,040 kg, total height: 2,150 mm, total length: 2,035 mm, total width: 9,960 mm, color: yellow, Jungheinrich EZS 5100 XL Tow Tractor, Year of Manufacture 2016 Specifications: Jungheinrich EZS 5100 XL Year of Manufacture: 2016 Recorded Operating Hours: 5,215 h Njdpfx Amoyzrz Ajyold Load Capacity: 10,000 kg Net Weight: 2,040 kg Front Tyres: Super-elastic Rear Tyres: Super-elastic Battery Year: 2016 Battery Capacity: 625 Ah Battery Voltage: 48 V Equipment: Half cab (front, roof, and rear windows) Front windshield wiper Road approval (StVZO), indicators, etc. Warning beacon Trailer coupling Remarks: Drive motor power: 4.5 kW Towing capacity: 10,000 kg 1,800 N at 5', 7,500 N at 60' Dimensions (L x W x H): 2,035 x 996 x 2,150 mm

Condition: good (used), mileage: 712,530 km, power: 375 kW (509.86 HP), first registration: 04/2017, fuel type: diesel, axle configuration: 4x2, fuel: diesel, brakes: retarder, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2017, Equipment: ABS, AdBlue, air conditioning, cruise control, electric window regulation, fog lights, fridge, navigation system, parking heater, power mirror, retarder, second fuel tank, soot filter, spoiler, = Additional Options and Equipment = - Aluminum fuel tank - Leaf suspension - Power brake booster - Roof spoiler - EPS - Intarder - Tipping hydraulics - Alloy wheels - Air horn - Particulate filter - Radio/CD player - Sleeper cab - Side door - Sun visor - Auxiliary heater - Toolbox = Further Information = Front axle: Steering; Suspension: Leaf spring Rear axle: Suspension: Air suspension Unladen weight: 7,768 kg Payload: 11,232 kg Gross vehicle weight: 19,000 kg Technical condition: good Visual condition: good Disclaimer: No liability for printing or typographical errors. Subject to change, prior sale, and errors! Please contact Emad Al Shogran for further information. Vehicle number: 51 Iveco Stralis 510 / Retarder / Moving floor hydraulics / Stationary air conditioning / Euro 6 .: WJMM62AU90C367844 Transmission: Automatic Suspension: Leaf / Air Air conditioning Retarder Engine brake Cruise control Refrigerator Stationary air conditioning Auxiliary heater Navigation system Adaptive cruise control Lane assist Tipping hydraulics Moving floor hydraulics Nodpfxjywgc Ho Amyeld Euro 6 = Company Information = No liability for printing or typographical errors. Subject to change, prior sale, and errors! Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Tel.: Mobile: Mrs. Sabine Faust Email.

Condition: new, sheet thickness: 45bending length: 3100upper roll diameter: 480 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting Nsdpfx Amod Ab Rcsyeld - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Options: - variable speed of rotation EURO 5.858,-- - metarial feeding table EURO 5.100,-- - oil coiler STD. - center support EURO 18.750,-- - side supports EURO 15.150,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references!

Condition: new, bending length: 3100sheet thickness: 45upper roll diameter: 510 Technical specifications: - Hardened and polished rolls - Conic bending device - Digital readout for side rolls - Complete body made of ST-52 Steel - Portable control panel separated form machine - Rolls are mounted with bearings Nljdpfjd Ab Snsx Amyjd - Top roll cover, openable and closeable by hydraulic, controlled from control panel. - All rolls are driven by hydraulic motor and planetary gearbox - Side rolls upwards downwards movements are hydraulic powered Options: - variable speed of rotation EURO 5.858,-- - metarial feeding table EURO  - oil coiler STD. - center support EURO 18.750,-- - side supports EURO 15.150,-- We have many references!