Used Reifenhäuser Rh 801-1-90-30 for sale (91,885)

Condition: ready for operation (used), Indramat KDV 1.3-100-220/300-W1 Power Supply SN23226473930903, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photo Nsdpfx Afsi Ebi Aoajla

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: GSVW-3080-1250-1-F, functionality: fully functional, Cross-flow vacuum dryer with 31.68 m³ capacity The chamber holds 1 package in width at 1.20 m, 3 packages in height at 0.80 m with 0.10 m thick spacer timbers, with a maximum wood length of 16.0 m plus 0.5 m clearance. The chamber holds a net of approx. 19 m³ of trimmed timber with a wood thickness of 50 mm and a stacking stick thickness of 24 mm. Usable space: width 1.20 m, height 2.70 m, length 12.0 m Technology (see detailed performance description under Documents) - Stainless steel cylinder with 80 mm thick resin-bonded rock wool insulation and a ventilated external aluminum trapezoidal sheet cladding. - A vacuum door with special lock for easy end-side loading with walk-on trolley. - A vacuum water ring pump with a capacity of 5.5 kW evacuates the dryer (to be replaced in April 2025). Nlodpfxewrb Nko Afaoa - For air flow through the stacks, 12 fans with 1.5 kW rated power each in delta configuration. The average power consumption in vacuum is only about 0.5 kW per fan. - Hot water heat exchanger for max. 98 kW at 90°C supply temperature installed - The electrical connection is 47 amperes at 3 x 400 V / 50 Hz. - Excess moisture is condensed out via air heat exchangers. - The chamber climate can be humidified as needed using a hot water heated evaporation basin. - The chamber dries fully automatically. Only the wood type, wood thickness, and desired final moisture need to be entered. - Control MB4000 V including control panel - 10 wood moisture measuring points as well as climate and temperature sensors - Run-out rails must be re-ordered, as these are concreted in. The price is ex works and must be paid net before dismantling the plant. The plant must be dismantled or removed by the buyer. Dismantling is not included in the price.

Condition: new, Year of construction: 2021, Transnorm belt curve conveyor right 30°-1270-1100-IR900 RA2302 Technical data: Frame width (NB): 1270 mm Frame width with Bearing cover: 1390 mm Frame width with Bearing cover and gearbox: 1480 mm belt width (GuB): 1100 mm height (BH): 250 mm height motor below: 300 mm height including motor (MH): 550 mm Inner radius (IR): 1200 mm Conveying angle: 30° degrees middler conveying speed (v m/s): 1,4 m/s Drive: SEW motor motor with frequency converter Electrical data: 50Hz V380-500, kW 1,5 / S1 Belt: KT 96 new Year of construction: 2021 Height Sideguides: 194 mm Optionally available: Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. Nledpfx Ajt D R R Eofasa With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Year of construction: 2017, condition: used, Mecalux transfer roller conveyor slider 90° 1050-815-730 RA1914 Make: Mecalux Running direction: both directions Roller width (RB): 730 mm Nominal/outer width frame (NB): 745 mm Total width: 815 mm Length: 1050 mm Roller diameter: 50 mm Roller distance: 75 mm Motor overslide: Lenze-Motor 3x 400V, 0,25 kW Motor Roller conveyors: 1x ITOH-Deki 16936/010 24V Height frame: 130 mm Currently set high: 745 mm Conveyor speed: freely adjustable with frequency converter between 0.543 and 0.95 m/sr Optionally available: scope of delivery: supports and Light barrier Side guide oneand both sides For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics Nsdpora Hpxofx Afajla

Condition: new, Year of construction: 2021, Transnorm belt curve conveyor left 30°-1270-1100-IR900 Nledpot D R R Sofx Afaja RA2303 Technical data: Frame width (NB): 1270 mm Frame width with Bearing cover: 1390 mm Frame width with Bearing cover and gearbox: 1480 mm belt width (GuB): 1100 mm height (BH): 250 mm height motor below: 300 mm height including motor (MH): 550 mm Inner radius (IR): 900 mm Conveying angle: 30° degrees middler conveying speed (v m/s): 1,0 m/s Drive: SEW motor motor with frequency converter Electrical data: 50Hz V380-500, kW 1,5 / S1 Belt: KT 96 new Year of construction: 2021 Height Sideguides: 194 mm Optionally available: Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, mileage: 868,169 km, power: 310 kW (421.48 HP), first registration: 07/2001, fuel type: diesel, number of seats: 46, gearing type: mechanical, emission class: euro3, color: red, brakes: retarder, Equipment: ABS, air conditioning, bathroom, onboard kitchen, +++1st hand+++ +++Very good condition+++ General: * Engine: Mercedes-Benz * Emission standard: EURO3 * Transmission: Manual gearbox * Total seats: 46 * Seats: 44+1+1 sleeper seats with lap belts Safety: * Retarder * Cruise control * ABS * ASR (traction control) * Fog lights Passenger compartment: * Auxiliary heater * Air conditioning * Tables * Curtains * Luggage racks * Luggage nets * Adjustable air vents * Reading lights * Double glazing * Footrests * Kitchen * Refrigerator * Additional refrigerator * Coffee machine * Mid-mounted WC * Leather headrest inserts * Tour guide microphone * Driver microphone Exterior: Nodpfx Aov Dpvwofasla * Tow bar pre-installed * Lift/lowering system * Power steering * Analog tachograph * Sun visor * Electrically adjustable exterior mirrors * Driver's door * Ski box brackets * Central locking * Roof hatches * Roof fans * Roof vent Audio, Communication, Electronics: * Radio * Cassette * Video Miscellaneous: * German registration document * Twin tyres * Vehicle dimensions: Length 12 m, Width 2.55 m, Height 3.75 m * Wheel covers * Tyres: Front approx. 30%, Rear approx. 30% Our internal vehicle number: 11355 Subject to errors. Images and text may differ from the actual vehicle. Over 300 vehicles constantly in stock.

Condition: new, sheet thickness: 10bending length: 3100upper roll diameter: 270messurements (LxWxH): 5600 x 1450 x 1600prebending: 8motor: 11Bottom Roll Diameter: 250Side Roll: 210 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Nsdod Ab R Sjpfx Afaola Options: DescriptionQtyNet Price (¤)Heating + Cooling11.477 ¤Variable Speed Rotation13.323 ¤Material Feeding Table 1000 × 2000 – 1 pcs12.414 ¤Central Support15.857 ¤Central Support Preparation1888 ¤Side Supports Left and Right15.020 ¤Side Support Preparation vs Standard1923 ¤Control System CNC-CS618.200 ¤Control System NC-CS617.721 ¤Ejector System113.020 ¤ We have many references!

Condition: used, mileage: 369,000 km, power: 316 kW (429.64 HP), first registration: 03/2020, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2020, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, * MAN TGS 18.430 4x4H BLS tractor unit * Euro6D * Automatic transmission * MAN Brakematic * Local traffic cab / rear wall with window * Leaf-air suspension * Wheelbase 3.90 m * Axle load indicator * Tipping hydraulics * Blind spot warning system * Automatic climate control * Auxiliary heater (parking heater) * Refrigerator compartment * Electric windows * LOF registration, key number 90 / at extra cost Nlsdpfx Afey Arppeaea * 4 vehicles available

Condition: ready for operation (used), Year of construction: 1996, pressure 125 t chamfer lenght 3050 mm distance between columns 2550 mm ajustment speed 90.0 mm/sec working feed 10.0 mm/sec return speed 75.0 mm/sec stroke 140 mm dayligth 375 mm column arm 250 mm table width 90.0 mm work height max. ca. 950 mm Number of working hours 14.100 h total power requirement 13.5 kW weight 8500 kg range L-W-H 3630 x 2300 x 2505 mm From a maintenance workshop Good / well-maintained condition With only approx. 14.100 operating hours (!!) - in checked conditions - machinevideo - ?v=wtEBQ0UawQ8 Equipment: - CNC electro-hydraulic press brake - DELEM CNC control - model "DA 58" * Swiveling control panel, front left * 2D graphic programming & product display * Tool & program library - CNC-controlled axes: * Y1+Y2 / X1+X2 / R1+R2 / Z1+Z2 / CNC crowning Nljdpfsxabk Iex Afaea - CNC electro-motorized backgauge (X axes) * Stop system with 2x CNC-controlled gantries - CNC electro-motorized height adjustment of the backgauge (R axes) - CNC electro-motorized adjustment of the stop fingers (Z axes) - Manual upper tool clamping - Manual lower tool clamping - Various split upper and lower tools - 2x stable, movable Front support arms - 1x freely movable 2-hand/foot control - Side guard (swinging doors) - Rear guard (swinging door) - Original operating instructions + control unit - Manufacturer's CE declaration

Condition: used, mileage: 369,000 km, power: 316 kW (429.64 HP), first registration: 03/2020, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2020, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, * MAN TGS 18.430 4x4H BLS tractor unit * Euro6D * Automatic transmission * MAN Brakematic * Short distribution cab * Leaf/air suspension * Tipping hydraulics * Blind spot assistant Nedpfxjyzwf Tj Afasla * Automatic climate control * Auxiliary heater * Cooling compartment * Electric windows * LOF registration key code 90 / at extra cost * 4 vehicles available

Condition: used, CNC press brake FASTI type 904-125/30 serial no. 95-904-5775 year of construction 1995 Pressure capacity 125 ton. Working length 3050 mm Stroke approx. 335 mm Stand projection 300 mm Clearance between the side uprights 2550 mm Tool installation height max. 465 mm (opening width between the tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Backgauge X-axis 500 mm Backgauge R-axis 115 mm Backgauge Z-axis approx. 1950 mm Lowering speed Y rapid traverse 90 mm/s Lowering speed Y-operation 8.9 mm/s Nlodpfx Afjhmmfkeaja Return stroke speed Y-retraction 75 mm/s Oil filling approx. 160 liters Motor power 18.5 kW Mains connection 400 Volt, 50 Hz, 20 Amp. - 7-axis CNC control DELEM type DA 58 with LCD screen - 1 axis for back gauge - stop depth (X-axis) - 2 axes for back gauge - fence height (finger R1 + finger R2) - 2 axes for back gauge - stop finger, laterally movable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or 2-hand control panel only - Hydraulic tool clamping for the TRUMPF upper tool system, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool pin 13 x 20 mm) - FIESSLER safety light barrier, type AKAS - 2 material support arms at the front, manually movable to the side and height-adjustable - Electrical diagram, hydraulic diagram, user manual for control available - Control cabinet on the machine - without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons. Good condition

Condition: good (used), Standard holders and accessories, SASSEX spiral drill bits, Sassex spiral drill bits, reaming bits, Sassex reamers, Sassex holders, tool holders, drill bit mounts, twist drills -Manufacturer: Sassex, clip-on holder -Mounting bracket: Type H7 125.1-150 -Recording: MK5 -Tool: 90° / Ø 130 mm Nodpfxjwa Nuwe Afajla -Dimensions: Ø 130 x 375 mm -Weight: 9 kg

Condition: new, Year of construction: 2025, Plate dimensions 3000x1350 mm Daylight opening 400 mm Number of daylights 1 St. Nlsdoyk H Stepfx Afaea Heating 31,5 kW Specific pressure 2,5-5,0 kg/cm² Total pressure 90 t Motor output 1,5 kW Dimensions (L/W/H) 3480x1500x2000 mm weight of the machine ca. 5000 kg

Operating hours: 54,000 h, condition: ready for operation (used), functionality: fully functional, CINCINNATI PROTON 60-30G Screw diameter: 60 mm, L/D = 30 Grooved feed section Throughput: approx. 450 kg/h PE Motor (DC drive): 163 kW Screw speed: max. 221 rpm Nodpfx Afjyrihgjaela Tool zones: 5 pcs + 1 pc for adapter Melt pressure & temperature sensors included Control system: Cincinnati EXc Pro-NT Cylinder in bimetal design – condition: good Screw with wear-protection and hardened feed section – condition: good Dimensions (L x W x H): 2,580 x 1,430 x 1,800 mm Weight: 2,500 kg

Condition: used, Synchronous servomotor with holding brake and gearbox, geared motor, electric motor, angular geared motor Motor: Manufacturer: LUST LTI DRIVES Type: LSK-190-7-30-560 T1,P,KK,1R Order No.: 716090 Art. No.: 0970.8016 Machine type: Permanently excited synchronous servo motor DC link voltage of the controller Uzk: 560 VDC Rated power: 14.51 kw Rated speed: 3000 rpm Rated torque Mn: 46.2 Nm Standstill torque M0: 83.4 Nm Rated current In: 31.5 A Standstill current I0 / I0max: 54.9 / 219.6 A Njdpfxof Dlzuj Afaela Pole pairs: 3 Shaft diameter: 32 mm Shaft length 50 mm - Shaft journal with key and keyway DIN 6885 / A10x8x50 - Option 1R Resolver 1-pole pair - Option KK Terminal box - Option T1 (DIN-PTC double base insulated) - Power connection 8-pin junction box - Resolver connection 12-pin junction box Holding brake: Manufacturer: LUST LTI DRIVES Type: NFH10-H/BA Order no.: 718690 Art. No: Rated voltage: 24 VDC Rated current: 4.5 A Rated power: 108 W Braking torque: 65 Nm Angular gearbox WESTFALIA Systemtechnik Hollow shaft output: internal Ø 65 mm Hollow shaft length: approx. 280 mm Gearbox output speed: max 450 rpm Speed gearbox input: max 4500 rpm. Transmission ratio: 10:1 - Shaft journals also ground on the outside - Gearbox can be mounted on two flange surfaces - Mounting hole on gearbox 180 x 180 mm / 180 x 230 mm Overall dimensions L x W x H: 1110 x 250 x 350 mm Total weight: 180 kg good condition

Condition: used, functionality: fully functional, Year of construction: 1999, operating hours: 2,550 h, load capacity: 10,000 kg, lifting height: 5,500 mm, fuel type: diesel, mast type: simplex, construction height: 4,250 mm, fork length: 1,950 mm, drive type: Diesel, Diesel forklift Mast type: Standard Condition: Ready for use and fully functional Technical condition: good Sideshift, fork positioner, 3rd valve, 4th valve, heating, full cab, Nsdpfx Afjxgktfeasla

Condition: new, Year of construction: 2021, Transnorm belt curve conveyor right GKF 90°-1300-1100-IR900 -- NEW RA2332 Technical data: Frame width (NB): 1300 mm Frame width with Bearing cover: 1400 mm Frame width with Bearing cover and gearbox (MB): 1500 mm belt width (GuB): 1100 mm height (BH): 160 mm height motor below: 360 mm height including motor (MH): 520 mm Inner radius (IR): 900 mm Conveying angle: 90° degrees middler conveying speed (v m/s): 1,5m/s Drive: SEW motor motor with frequency converter Electrical data: 50Hz V380-500, kW 2.2 / S1 Belt: KT 96 new Year of construction: 2021 Optionally available: Supports Nlodpfxovg Nfqo Afaoa Sideguides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2020, Transnorm spiral helix belt curve conveyor left 90°-1300-1100 IR900 - Showroom machine RA2319 Technical data: Frame width (NB): 1300 mm,1450 mm with Motor belt width (GuB): 1100 mm Nedsvadkuspfx Afasla height (BH): 210 mm Inner radius (IR): 900 mm Conveying angle: 90° degrees decline: 500 mm / 90° = 2000 mm / 360° support feet: optionally available Conveying speed (v m/s): 0,8 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0.75 / S1 Belt: double layer, green, smooth, KT36 (wear see pictures) Year of construction: 2020 Incl. supports, current height from 300mm to 800mm Optionally available: adjustable up and down with frequency converter Supports, if deviating from the currently installed Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: new, empty load weight: 995 kg, maximum load weight: 2,005 kg, overall weight: 3,000 kg, axle configuration: 2 axles, loading space length: 3,400 mm, loading space width: 1,750 mm, loading space height: 1,900 mm, loading space volume: 11.6 m³, color: silver, construction height: 2,560 mm, working width: 2,290 mm, Hydraulics, automatic reversing, hot-dip galvanizing, * IMMEDIATELY AVAILABLE * TECHNICAL DATA: - Make: Unsinn - Model: UKT 6C 3417-30-14 - Vehicle type: Refrigerated trailer - Vehicle condition: New vehicle - First registration: Without first registration - TÜV/HU: 2 years from first registration - Interior dimensions (LxWxH): 340 x 175 x 190 cm - Exterior dimensions (LxWxH): 542 x 229 x 256 cm - Loading height of floor: 59 cm - Perm. Gross vehicle weight: 3,000 kg - Unladen weight: 995 kg - Payload: 2.005 kg - Chassis: Low loader (wheels next to the body) - Tyres: 185/65R14 - Chassis: ALKO rubber spring axle - Support wheel: Yes, automatic - 100 km/h approval: Optional DESCRIPTION: - Unique, torsion-resistant aluminium chassis for safe driving characteristics - Loading area made of multi-glued screen printing plate, 18 mm - 4 stable telescopic crank supports for up to 6000 kg standing weight - Thermo-sandwich body - Inner and outer skin made of hot-dip galvanized and powder-coated sheet steel, 40 mm PU core insulation - Exterior color silver RAL 9006 - Double-wing rear door with aluminium hinges - Refrigeration compartment press lever lock and stainless steel door stop - Rear frame and edging profiles made of special anodized aluminium profiles for attractive aesthetics 200 mm impact protection at the bottom, all-round on 3 sides - Arktik 1600 N refrigeration unit - cooling capacity 1800 watts at a cold room temperature of +6 C and an ambient temperature of 30 C - temperature control range from +2 C to +10 C - evaporator air flow rate: 750 m - Fully encapsulated unit with outdoor housing mounted at the top of the front - Environmentally friendly CFC-free refrigerant - Electronic automatic defrosting of the evaporator - The operating display can be locked and is therefore protected against unauthorized operation - Electronic digital thermostat for optimum regulation of the temperature range - 230 volt interior lighting - Very stable V-drawbar REINFORCED - ALKO overrun device and parking brake - Automatic reversing system - Plastic mudguards - 13-pin plug - Reversing light - Large reversing light - Large reversing lights Reversing lights - Large safety lighting - Integrated rear fog light - Lighting recessed in rear frame - Reinforced automatic support wheel Optional retrofitting accessories: - 100km/H approval - Slot-and-hole rails - Rubber-coated bar rail - Steel or aluminum locking bar - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Nljdpfeu Hrvijx Afaea

Condition: used, Year of construction: 2013, operating hours: 471 h, machine/vehicle number: HL11816-00-7306, Empty weight: 3.220 kg Lifting capacity: 300 kg Working height: 1.400 cm Nledpfxowhuanj Afaoa Front tyres / undercarriage remaining: 30 Rear tyres remaining : 30 Tyre brand: - Transport dimensions (LxWxH): 2.49x1.65x2.69 Please contact PFEIFER GROUP for more information

Year of construction: 1990, condition: ready for operation (used), Working width: 3000mm, max. sheet thickness: 110mm, with CNC control, central lubrication, cone bending device, infeed carriage, one upper and two lateral cylinder support devices. Nsdpjnvfc Eofx Afaola

Condition: new, sheet thickness: 45bending length: 3100upper roll diameter: 480 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Options: - variable speed of rotation EURO 5.858,-- - metarial feeding table EURO 5.100,-- - oil coiler STD. Nleded Ab Rcjpfx Afaea - center support EURO 18.750,-- - side supports EURO 15.150,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references!

Condition: new, bending length: 3100sheet thickness: 45upper roll diameter: 510 Technical specifications: - Hardened and polished rolls - Conic bending device - Digital readout for side rolls - Complete body made of ST-52 Steel - Portable control panel separated form machine - Rolls are mounted with bearings - Top roll cover, openable and closeable by hydraulic, controlled from control panel. - All rolls are driven by hydraulic motor and planetary gearbox Nlodpfxed Ab Snj Afaea - Side rolls upwards downwards movements are hydraulic powered Options: - variable speed of rotation EURO 5.858,-- - metarial feeding table EURO  - oil coiler STD. - center support EURO 18.750,-- - side supports EURO 15.150,-- We have many references!

Condition: new, sheet thickness: 45bending length: 3100upper roll diameter: 510messurements (LxWxH): 6300 x 2300 x 2590prebending: 35weight approx.: 33500 Technical specifications: Nlodpfed Ab N Uox Afaja - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Options: - variable speed of rotation EURO 7.000,-- - metarial feeding table EURO 3.700,-- - oil coiler EURO 800,-- - center support EURO 9.500,-- - side supports EURO 10.200,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references!

Condition: used, mileage: 32,975 km, power: 118 kW (160.44 HP), first registration: 02/1986, fuel type: diesel, empty load weight: 6,320 kg, maximum load weight: 2,880 kg, overall weight: 9,200 kg, tire size: 9R22,5, axle configuration: 4x4, wheelbase: 3,500 mm, color: blue, driver cabin: other, gearing type: mechanical, emission class: none, suspension: steel, Equipment: all wheel drive, cabin, differential lock, trailer coupling, Vehicle location: Bovenden, Doka, double bench seat, switch 5, differential lock, storage box, leaf suspension, air+light trailer hitch Wheelbase: 3500 mm double cab, box body with roller shutters. Body length approx. 3100 mm! Nljdpfx Afsvhky Sjasa Spare wheel available for an extra charge! The sale to tradesmen or export is subject to 19% VAT! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .