Used Power Pack 5 V/10 A for sale (119,434)

Condition: ready for operation (used), Schroff SB 201 / 4-6 V, 3 A / No. 11005-58 31061-036 Power Supply, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Lhodpsi Ec Iisfx Ab Aon

Condition: new, Year of construction: 2026, Capacity ~ 15,000 m³/h Motor power 15 kW / 20 HP (optional: 18 kW motor) Filter surface area 57.9 m² Lhodpfox D Ah Nox Ab Aon Exhaust port diameter 400 mm Voltage 400 V Filter material polyester Filter permeability 3 microns Filter dimensions Ø152 x 1120 mm Number of filters 108 Dimensions (L x W x H) 4147.5 x 1129 x 2480 mm Weight 870 kg Scope of delivery: Polyester filter, 3 microns 5 containers 3 chimneys Filter cleaning using a vibration system with control The automatic vibration filter cloth cleaning system allows for continuous monitoring of filter operation during breaks and during operation. The filters used are classified as "G" filtration category, which allows for air purification up to 0.2 mg/m3/h (H2).

Condition: new, Year of construction: 2019, Hello, for sale is a new spare part for a Bystronic table: CUTTING HEAD HUB10 ART. B-017530-V03-A. Lhjdeygl Dtepfx Ab Asn

Condition: new, Year of construction: 2025, Description: IE 3 motor as standard Ledpfx Ascqy I Ssb Aohn Maximum volume flow up to 8,500 m³/h at the fan Approximately 73 m² filter area, residual dust content after H3 Pre-separator as standard 71 dB (A) at full load (according to DIN EN ISO 11201) Already meets the requirements of prEN 16770 Optional: Models with type-tested rotary valve airlock (FSA) Tested backflow damper Integrated automatic extinguishing system Suction nozzle: 350 mm Motor rated power: 11 kW Voltage: 400 V / 50 Hz Maximum volume flow: 8500 m³/h Rated volume flow: 6927 m³/h Negative pressure at Vnenn.: 2765 Pa Filter area: 73 m² Chip collection volume: (net/gross) 3 x 165 L / 3 x 241 L Sound pressure level: 71 dB (A) Dimensions (L x W x H): 3112 x 1058 x 2351 mm Weight: 1074 kg Location: in stock at 54634 Bitburg

Year of construction: 2026, condition: new, New Machine Year of Manufacture: 2026 Features and Technical Specifications: Robust, high-performance 2-cylinder HOS compressor, 2-stage Intake capacity: 850 l/min Filling capacity: 680 l/min at 6 bar Lsdpfez I Ufrex Ab Aehn Max. pressure: 10 bar Tank: 270 l, hot-dip galvanized inside and out Motor power: 5.5 kW Total power consumption: 6.5 kW Connection: 400 V / 50 Hz Compressor speed: 1,240 rpm Fully automatic on/off operation with CONDOR pressure switch Pressure regulator AD 54 refrigerant dryer Fine filter WOS 1 oil-water separator Automatic condensate drain on the tank and refrigerant dryer Aftercooler and intermediate cooler Safety quick-connect coupling Belt drive with metal belt guard Flexible reinforced hose with heat protection Tank air outlet: 3/4" Air outlet on refrigerated dryer: 1/2" Sound pressure level: 83 dB(A) Dimensions (L × W × H): approx. 1,200 × 800 × 1,970 mm Weight: approx. 204 kg AD-2000 compliant Vibrating elements and safety base 15-year warranty against perforation of the compressed air tank

Condition: new, Year of construction: 2026, New Kaeser after-compressor N153-G (10/40) with ball valve and pressure switch on the inlet side with ball valve and pressure switch on the outlet side with check valve Time of delivery: 6 Wochen Technical Data:Inlet pressure: 10 bar Outlet pressure: 40 bar Pressure ratio: 3.7 Flow rate: 0.89 m³/min Min. ambient temperature: 2 °C Max. ambient temperature: 40 °C Compressor block speed: 650 rpm Number of cylinders: 2 Rated power of drive motor: 4.0 kW Efficiency class of drive motor: IE3 Protection class of drive motor: IP 55 electrical supply: 400 V / 3 / 50 Hz Sound pressure level: 74 dB (A) Compressed air connection on the inlet side: G 3/4" Lsdewl Icdjpfx Ab Ashn Compressed air connection on the outlet side: G 1/2" Dimensions W x D x H: 1390 x 720 x 820 mm Weight: 255 kg Visit our store.We always have a large selection of new and used compressors in stock!

Condition: new, Year of construction: 2026, The manufacturer guarantees the cleaning quality The system of automatic vibrating cleaning of the filter cloth - during breaks and during filter operation, it allows for constant monitoring of the correct operation. Technical specifications: • Conforms to H-2 standard • Extraction capacity ~ 4500 m3/h • Motor power 3.0 kW • Speed 3000 rpm • Voltage 400V, 50Hz • Suction connection 200 mm • Polyester filter material, 5 microns • Filter surface 8.8 m2 • Speed 28 m/sec. • Number of filters 18 • Dimensions 752 x 1502 x 2144 mm • Weight 180 kg • Category of filters G • Polyester filter material • Noise 80 dB without connection, 65 dB when connected to the machine via pipe Delivery set: Ledpfx Aegyfmasb Ajhn - 5 micron polyester filter - 1 container - Running gear - Filter cleaning using a controlled vibration system - Fire extinguisher - Fulfill H-2 Norms + 850 euros for the model with fire extinguisher (Safe System)

Year of construction: 2012, condition: excellent (used), functionality: fully functional, Fitotron® modular plant growth chambers, Type HGC 1014 V, incl. HQI-T and Krypton lighting module Temperature range +5°C to +45°C for temperature testing Test chamber volume approx. 1300 L Simpac control system Network connection USB port The Fitotron® HGC series plant growth chambers feature a modular design. Individual modules can be added or exchanged as needed, allowing the units to be adapted for various applications. They are suitable for plants with high light requirements, such as wheat, maize, cotton, rice, and C4 plants. Lighting: HQI-BT-400 W/D and 100 W Temperature range: +5°C to +45°C Temporal temperature fluctuation: ± 0.5 K Humidity range: 40% to 95% Dew point range: +4°C to +35°C Temporal humidity fluctuation: ± 3% to 5% RH Fresh air supply: up to 7.5 m³/h Power consumption (without fresh air operation at 25°C / 75% RH): approx. 0.8 kW Specifications for climatic testing with irradiation Temperature range: +10°C to +45°C (with lights on) Temporal temperature fluctuation: ± 0.5 K Humidity range: 40% to 95% Dew point range: +4°C to +35°C Temporal humidity fluctuation: ± 3% to 5% RH Humidification and dehumidification system; stainless steel test chamber Internal dimensions: Height 1400 mm, Depth 750 mm, Width 1270 mm External dimensions: Height 1985 mm, Depth 980 mm, Width 2320 mm External dimensions with lighting module: Height 2450 mm Single-door unit with observation window Interface for computer connection Power supply: 3/N/PE 400V ±10% 50Hz Ljdpfjzpv Iasx Ab Aehn CE marked, mobile, very good condition Cable/pipe port: Ø 50 mm Air cooling Refrigerant: R404A Weight: approx. 480 kg + 130 kg (lighting module) Four units of this model are available for sale. Please feel free to contact us if you have any further questions.

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 1,450 mm, travel distance Y-axis: 1,050 mm, travel distance Z-axis: 600 mm, table load: 600 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 15,000 W, number of axes: 5, This 5s Okuma MU 6300 V L 5 AXIS was manufactured in 2016. It features a generous X-Axis travel of 1,450 mm and Y-Axis travel of 1,050 mm, providing ample workspace for various machining tasks. With a maximum workpiece diameter of 830 mm and a tool magazine capacity of 64 positions, consider the opportunity to buy this Okuma MU 6300 V L vertical machining centre. Contact us for further details. • A-axis rotation: +90° / -120° • C-axis rotation speed: 800 rpm • Distance table–spindle nose: 160–760 mm • Rapid feed (all axes): 50 m/min • C-axis table diameter: 630 mm • Max workpiece size (D × H): 830 × 550 mm • Tool magazine: 64 positions (expandable to 166) Lhsdpfx Aoyia Tlsb Asn Technical Specification Taper Size HSK 63

Condition: good (used), Year of construction: 2013, functionality: fully functional, 610 l/min., 10 bar, 5.5 kW, 400 volts, weight approx. 250 kg, dimensions 1490 x 720 x 1220 mm Good condition Ljdpfx Asybbczob Ajhn Price ex location Transport available at extra cost!

Condition: used, Arburg double axial pump AKP28 + AKP10- removed from Arburg Allrounder 275 V 25 removed from running machine - fully functionalmanufacturer: Arburg Lodpsu Tv A Rjfx Ab Ajhn type: AKP28 + AKP10 spare part no.: 250.957 manufacturer no.: R9 R9Type code: A10VS0 28 DFR1/31R-PPA12KB2-S1894, A10VS0 10 DFR1/52R-VSA14N00-S2679The number before the first slash describes the device series. For this reason, this digit of the type code on your old spare part may differ. If you have any questions, please do not hesitate to contact us.

Condition: used, machine/vehicle number: #14200, Rotor diameter: 500 mm Rotor width: 1000 mm Number of rotor blades: 96 Number of stator blades: 48 Lsdez Svb Repfx Ab Aohn Inlet cross-section: approx. 500 x 1000 mm Drive motor: 45 kW

Condition: excellent (used), C.N.C. WORKING CENTER with 4 axes (X-Y-Z-C) for routering, boring, cutting and edge banding Numerical Control IMATRONIC 231 (IMAWOP) Max useful working area (without edge banding process) mm 5000 x 1630 x 100 Max useful working area (edge banding process) mm 3900 x 1450 x 60 (panel thickness) Lsdpfx Asfbmqteb Aohn No. 8 movable rails (supports) length mm 1200 LED displaying both the axe X and axe Y position Vacuum cups (with No. 1 vacuum pump, capacity 140 m3/h) Safety side metal grids and front emergency carpets Motorized belt to evacuate the wastes from the working process No. 2 Vertical Electro-spindles HSK F63 (1 x Kw 11 + 1 x Kw 7,5) Automatic Tools Changing System, with 18 folds (places) No. 21 Independent vertical boring spindles (4 x Kw 1,2) No. 6 Independent horizontal boring spindles (1 x Kw 3) Banding group on board - Glueing Unit (Hot Melt Glue) VT 50 Edge coils supporting unit (No. 6 reels) OPTIONALS: No. 1 Circular Saw to cut and for grooving - max diam mm 200 (90°) No. 1 Aggregate Flush-Trimming/Scraping Unit No. 1 Cross aggregate with No. 4 horizontal boring spindles

Condition: good (used), For sale is a CNC milling machine DMG DMU 50 V with Heidenhain 426/430 control, 5 axes. The item is in good condition. Technical specifications: Travel X-axis: 500 mm Travel Y-axis: 380 mm Travel Z-axis: 400 mm Table: NC rotary/swivel table Rotary/swivel axes: B-axis approx. -10° / +95° C-axis (rotation): 360° Max. workpiece weight: approx. 200 kg Table surface: Ø 500 x 380 mm Main spindle: SK 40 (ISO 40) Max. spindle speed: approx. 10,000 rpm Max. tool length: approx. 280 mm Max. tool weight: approx. 6 kg Transport dimensions: 2.45 x 1.76 x 2.38 m Machine weight: approx. 3,500 kg Total power requirement: approx. 17 kW Transport and loading can be arranged Europe-wide for an additional charge, if required. Prices exclude VAT. Inspection possible by appointment. Please contact us, our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sales PURCHASE & SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours? For more information or contact options, please visit our website. Ljdoxvzy Ujpfx Ab Ajhn

Condition: excellent (used), SINGLE-SIDE Sizing-Milling & Edge Banding Line PRE-FORMING (DIRECT POSTFORMING), composed of the following machines: A) Double station bridge loader "TREVISAN", with motorised roller conveyor B) Single-side Sizing & Edge Banding "HOMAG" Mod. Profi VFL79/3/P/A Preforming Edges (tape) thickness in rolls (min/max) max mm 0.35 (for U and L profiles) Panel thickness (min/max) mm 16 / 30 (optional mm 50) Working width (min/max) min mm 150 - Variable feeding speed (m/min) 10 - 32 Numerical control / PC 22 software / WoodCommander Lodpsnzhxqofx Ab Aehn 01°) Horizontal milling unit (for top incision) Kw 2,2 02°) Hogging Unit (Kw 15) 0°-15° (for pre-hogging from above) 03°) Milling Shaping Unit Kw 6,6 (top rebate milling) with Hydro-clamp 04°) Milling Shaping Unit Kw 6,6 (bottom rebate milling) 0°-120° (with Hydro-clamp) 05°) Milling Shaping Unit Kw 0.7 (radius milling for profile finishing) 06°) Milling Shaping Unit Kw 1.85 (U profile milling) HSK25 07°) Milling Grooving unit UF 11 (Kw 4) for grooving or rebate milling 08°) Milling Shaping Unit Kw 2,2 (milling for chamfering and laminate overhang at top) 09°) Milling Shaping Unit Kw 2,2 (milling for the bottom bend groove) 10°) RIGHT SIDE: Milling Shaping Unit Kw 6,6 (grooving & rebate milling) panel width mm 160 - 1050 11°) RIGHT SIDE: Fine trimming unit (2 x Kw 1) for top and bottom edging and finishing (0°-25°) 12°) Cleaner / Blower (Kw 0,55) of postformed piece 13°) Laminate overhang control (to detect laminate breakages) 14°) Glueing Unit (P.U.R) Glue (PU34+QA34) spray glue application (with nozzles) 15°) Pressure zone for "L" profile (VF Direct) for panels up to max. thickness 50 mm 16°) Pressure zone for "U" profile (for spacer profile R = 2.5 mm) 17°) Upper Circular Knife 18°) Fine Trimming Unit / Finishing Unit (2 x Kw 0.55) HSK25 (0°-30°) 19°) Oscillating upper cleaner (1 x Kw 0.25) C) Double station bridge unloader "TREVISAN", with motorised roller conveyor

Condition: used, Year of construction: 2001, stations 10 / 22 tool taper SK 40 control SIEMENS SIMATIC OP 3 total power requirement ca. 112 kW = transfer machine Shift drum with 10 workpiece stations, 22 machining units (drilling 7 units, drilling and thread cutting Lsdpfxjtqqlqo Ab Aehn 8 units; drilling and sinking 5 units; drilling, sinking and thread- cutting 2 unit), spindle taper SK 40 each, engine power of the individual units between 4.0 and 4.5 kW, SIEMENS control SIMATIC OP 3, assembly robot ABB Accessories.: chucks (without jaws), chip conveyor, coolant device

Condition: new, Year of construction: 2023, operating hours: 4 h, functionality: fully functional, machine/vehicle number: N/A, overall weight: 6,000 kg, tank capacity: 2,000 l, power: 620 kW (842.96 HP), continuous power: 5,600,000 kW (7,613,872.00 HP), continuous power (apparent): 700,000 kVA, total length: 500 mm, total width: 180 mm, total height: 274 mm, type of cooling: water, fuel: diesel, input voltage: 400 V, input frequency: 50 Hz, noise level: 82 dB, rotational speed (min.): 1,500 rpm, type of input current: three-phase, warranty duration: 12 months, A new industrial diesel generator built into a sound and weather proofed canopy, constructed from galvanized steel and fitted with a residential exhaust muffler. Manufactured in the UK using UK and EU components, it has a bunded internal 2000ltr base fuel tank, a Scania DC16 078A-02-43 1500RPM water cooled diesel engine coupled to a European alternator and controlled by a Deep Sea Electronic Module. Ljdpordzg Hefx Ab Ajhn The generator is supplied with a special catalyst (SCR) system to achieve Tier 5 emissions compliant with a 2500ltr Urea tank(ad-blue). This is new still in the box, the installation is included via the European manufacturer of the system. The 82db sound level is measured at a1m distance from the generator, see attached images of the generator when under load test and relevant brochures.

Condition: used, mileage: 1,096,157 km, power: 302 kW (410.61 HP), first registration: 06/2015, fuel type: diesel, fuel: diesel, Scania R 410 4x2 *MEGA* *Retarder* *Topline* - 5 units available: 3 from 2015, 2 from 2016! (between 950,000 and 1,200,000 km) ● Power: 302 kW / 410 hp ● Engine displacement: 12,742 cm³ ● Emission standard: EURO 6c ● Automatic transmission / Opticruise ● Retarder / Intarder ● ABS / ASR ● Lifting/lowering system ● Differential lock ● Hill start assist ● Fully air-suspended ● Full spoiler ● Automatic climate control ● Auxiliary heater ● 2 bunks ● Sunroof ● Central locking ● Multifunction steering wheel ● Electrically adjustable / heated exterior mirrors ● Electric windows ● CB radio ● Radio CD ● Refrigerator ● Permissible total weight: 18,000 kg (19,000 kg technically possible) ● Unladen weight: 8,140 kg ● 2 fuel tanks Lodpfxjzd Nxuo Ab Aohn ● Wheelbase: 3,700 mm ● Disc brakes ● Front / rear suspension: Air / Air ● Tire size front / rear: 375/50 R22.5 / 295/60 R22.5 ● Tread depth: 10/11 / 9/9/7/5 - German vehicles! - First owner! - Available new upon request and for an additional charge! Errors and prior sale excepted! = Further information = Year of manufacture: 2015

Condition: good (used), Power supply, control card, input card, control, edge banding machine, edge banding machine -Manufacturer: BICC vero -Type: PK 50 monovolt -Number: 1x control cards available Lhsdpfsccbnpsx Ab Aen -Price: per piece -Dimensions: 40/210/H130 mm -Weight: 0.8 kg

Year of construction: 2004, condition: reconditioned (used), Stock-No. 2054 Lhodpfx Ajiyx Uzjb Asn 1used, partly overhauled and functionally tested Single-screw extruder AlphaTec A-ES 75.28 Screw –Ø 75 mm- 28 LD main drive 75 kW- AC Screw speed up to 80 r.p.m. - adjustable 1x venting port with vacuum-pump cylinder barrel heating apporx. 30 kW installed 3x addituional temperature controller for down-stream equipment Control board overhauled You´re welcome for inspection visit in our stock Wuppertal-Germany More extruders available

Year of construction: 2004, condition: reconditioned (used), Stock-No. 2054 1used, partly overhauled and functionally tested Single-screw extruder AlphaTec A-ES 75.28 Screw –Ø 75 mm- 28 LD main drive 75 kW- AC Screw speed up to 80 r.p.m. - adjustable 1x venting port with vacuum-pump cylinder barrel heating apporx. 30 kW installed 3x additional temperature controller for down-stream equipment Lodpfxjiyya Ae Ab Aehn Control board overhauled You´re welcome for inspection visit in our stock Wuppertal-Germany More extruders available

Year of construction: 2025, condition: used, For inquiries regarding the attachment, Mr. Herden will be happy to assist you by phone. Ledpfx Abjy Nv Eho Ajhn Westtech Woodcracker CS610 compact grapple saw / incl. Power-Tiltator / Year of manufacture: 2025 / DEMO unit / in stock & immediately available / Excellent condition! Price: €38,190.00 net / €45,446.10 gross - Cutting diameter: 610 mm - Grapple opening width: 1,280 mm - Own weight (basic - fully equipped): 830 - 1,060 kg - Recommended hydraulic flow: 65 - 110 l/min - Recommended auxiliary hydraulic flow: 40 - 60 l/min - Recommended operating pressure: 230 - 280 bar - Carrier vehicle operating weight: 15 - 20 t - Saw box: actively suspended - Chain lubrication: grease Equipment: - Including Power-Tiltator We stock a wide range of adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.)—available immediately. Our warehouse has a very large selection of various Westtech products, available immediately! Mr. Herden (Tel.) will be happy to assist you. Financing offers available upon request. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. With 800 used commercial vehicles in stock, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete Westtech Woodcracker product range! Errors and prior sale excepted! Internal No.: 422068 = More information = New: No Part suitable for: Forestry applications Please contact Marius Herden for further information.

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: DG15000SE3-3D, overall weight: 230 kg, power: 11 kW (14.96 HP), continuous power: 10 kW (13.60 HP), continuous power (apparent): 12 kVA, total length: 760 mm, total width: 1,130 mm, total height: 860 mm, rotational speed (max.): 3,000 rpm, type of cooling: air, fuel: diesel, fuel tank capacity: 30 l, input voltage: 230 V, input frequency: 50 Hz, noise level: 75 dB, rotational speed (min.): 3,000 rpm, type of input current: three-phase, warranty duration: 12 months, We provide the mobile power generators for your uninterrupted power requirements The DG15000SE3-3D power generator offers you an output of 11000 watts with its reliable 4-stroke engine. You can operate the DG15000SE3-3D power generator with its 30L tank for up to 8-10 hours. You can start the generator using the electric start or the cable pull. The starter battery is charged during operation, making it easy to start the next time you use it. Technical data: Maximum output : 11 kW Rated power : 10 kW Frequency : 50 Hz Speed : 300 rpm. Rated voltage: 230 V / 400V Lhodpotmu Nfjfx Ab Aen Power factor (cosφ) 1.0 DC output 12V/8.3A Power SINGLE-PHASE / THREE-PHASE E-Start Noise level (7m) 70-73 dB Tank capacity (L) 30 L Dimensions 1130x760x860 mm Weight 230kgs

Condition: used, all stainless steel electrically heated, max. 280°C adjustable speed 11 inspection/cleaning hatches belt width ± 1.000 mm net length ± 7.500 mm with belt wash system outside dimensions (l x w x h) : ± 9.500 mm x 1.600 mm x 2.400 mm Modular construction system Conveyor belt (opening 13 mm) total power 224 kW heating steam pressure: min 3 bar 10 kg/h per valve Lhodpfx Ao Aawxxeb Asn max. 3 bar 140 kg/h per valve cooking time min/max : 4min 36sec-120min steam injection (to heat up and to improve product yield)

Condition: used, Year of construction: 1996, - Double-sided IMA COMBIMA for longitudinal machining - Swiveling device - Double-sided IMA COMBIMA for transverse machining 1 used edge processing line IMA COMBIMA / K/ II/ R75 / 1075 / V / R3 Year of manufacture: 1996 Consisting of: - Double-sided IMA COMBIMA for longitudinal machining: Double edging unit 2 x milling units Gluing unit with granular pre-melting device 6-position roller magazine for edge material 1 x main pressure roller and 4 x follow-up pressure rollers Cutting unit Flush trimming 2 x fine milling units Profile trimming blade Surface trimming blade Buffing unit Smoothing unit - Swiveling device from longitudinal to transverse - Double-sided IMA COMBIMA for transverse machining Protective milling Double edging Grooving milling unit Gluing unit with granular pre-melting device 6-position roller magazine for edge material 1 x main pressure roller and 4 x follow-up pressure rollers Capping at the top pressure (retrofit to current model) Flush trimming Fine milling 2 x MFA milling units Grooving milling unit Ledozuypxjpfx Ab Aehn Profile trimming blade Surface trimming blade Copy buffing (4 motors) Buffing (2 motors) Smoothing unit Note: The technical data and descriptions are a transcript of the order confirmation at the time. Data is for informational purposes only and is not binding.