Used Pobeda Radial Drill for sale (5,479)

Condition: good (used), Year of construction: 1984, machine/vehicle number: 332, Offer 24130 Technical data: - Drilling capacity into solid steel ST 60 32 mm - Drilling capacity GG 25 40 mm - Thread cutting ST 60 M 27 - Drill spindle holder MK 4 - Quill stroke 150 mm - 12 drill spindle speeds 102 - 2000 rpm - 3 drilling feeds 0.1 - 0.3 mm - min. / max. distance spindle - table 310 / 610 mm - Drilling radius min / max 380 / 1200 mm - Table height 720 mm - Table size 1200 x 500 mm - Drive 400 V / 2.0 / 2.4 kW - Space requirement approx. W 1200 x H 2800 x D 2300 mm - Weight approx. 1500 kg - with: - thread cutting device Laedpfx Abjtxzrwozeg - hydr. columns + boom clamping - Coolant device - Vertical T-slots on the rear side of the machine

Condition: ready for operation (used), Year of construction: 1995, Drilling capacity St 60/GG 22: 40/50 mm Thread cutting St 60/GG 22: M 36/M 45 Clamping area of the table: 600 x 1800 mm Laodsy I Ua Ispfx Abzjg Height adjustment of the boom: 450 mm Min./max. drilling radius: 305/1305 mm Spindle taper: SK 40 Quill stroke: 200 mm Infinitely variable spindle speeds: 15 - 2800 rpm Infinitely variable feeds: 5 - 2000 mm/min Spindle drive, frequency controlled: 5.5 kW Electrical connection: 400 V, 14 kVA Weight: 3400 kg Space required: 3800 x 2000 x 2500 mm

Condition: good (used), Manufacturer: MAS Type: VR 4 Lodpfxjh Eigbs Abzjag Reach: 1000mm Without table!

Condition: good (used), Outreach: 915 mm Taper: MK3 Ledpod Ixy Iofx Abzsag Length: 1700 mm Width: 1,000 mm Height: 2000 mm Weight: 1000 kg

Condition: good (used), Year of construction: 2015, total width: 1,800 mm, total length: 3,700 mm, total height: 4,300 mm, overall weight: 14,000 kg, Maximum drilling capacity in steel: 75 mm Length:3700mm Width:1800mm Height:4300mm Weight:14000kg Lodpfjzi S Snox Abzeag Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Year of construction: 2026, A large and stable radial drilling machine with a large range of revolutions which ensures precise and fast machining. Machine features Large weight and sturdy design ensure stability and vibration-free operation Cube table provides adjustability and easy fixture of workpiece Control panel located at the front of the machine for improved convenience Ground column surface provides easy, precise arm travel Machine equipped with manual head and column arm limiter Large speed range for accurate and quick machining Technical data Maximum drilling diameter 35 mm (cast iron); 30 mm (steel) Distance from spindle to base 360–1300 mm Distance from spindle axis to column surface 260–1300 mm Spindle extension 200 mm Spindle taper MK4 Spindle speed ranges (6): 75, 130, 240, 380, 660, 1200 rpm Spindle feed ranges (3) 0.10; 0.16; 0.25 mm/turn Vertical arm travel speed 1.3 m/min Arm rotation 360° Main motor power 2.2 kW Lifting motor power 0.75 kW Worktable dimensions 510×380×305 mm Machine dimensions 800×1800×2150 mm Weight 1400 kg Default equipment B16 (3-16 mm) Drilling chuck B16/MK4 Drilling chuck mandrel Laedpfx Asi D Da Aobzog MK4/MK3 reduction Wedge for taper removal The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: used, Year of construction: 1997, Technical details: bore capacity in steel (diameter): 32 mm x-travel: 750 mm y-travel: 520 mm drill capacity in cast iron: 45 mm revolution per minute: 90 - 4500 U/min feed steps: 6 Lodszgwgfjpfx Abzsag bore spindle stroke: 250 mm boring spindle diameter: 30 mm drill spindle - Morse Taper: MK4 vertical adjustment of the arm: 520 mm throat max.: 1000 mm throat min.: 250 mm column diameter: 400 mm swivel range of the arm: 180 ° table clamping surface LxW: 1150 x 800 mm total power requirement: 3,5 KW weight of the machine ca.: 2000 kg dimension machine approx.LxWxH: 1,7 x 1,07 x 2,61 m The KOVOSVIT VO 32 is a robust and versatile radial drilling machine designed for industrial applications. The machine is suitable for drilling, boring, countersinking, reaming, and tapping operations in steel, cast iron, and other materials. Thanks to its swiveling radial arm and large reach, even large and heavy workpieces can be machined conveniently without the need for complex repositioning. The machine features a massive cast-iron construction, a powerful main drive, and an automatic feed system. The drilling head can be moved along the radial arm, providing a large working area. Its solid design ensures high precision, reliability, and a long service life, even under continuous operation. Equipment: ·Including coolant pump ·1 × boring tool block (boring cube) ·1 × machine vise *

Condition: excellent (used), Surface of the base plate 880 x 700 mm Lasdpouigzpofx Abzog Distance from spindle center to stand min./max. 220 / 620 mm Drill spindle: 13 mm passage Inner cone MK 3 Stroke 150 mm Spindle speeds 25 - 2560 rpm. Spindle feeds 0.06 - 0.12 - 0.25 mm/rev Motor power (1500/3000 rpm) 1.2 / 1.5 HP

Condition: good (used), Drilling capacity: Ø 50 mm Spindle fitting: MT5 Spindle speeds: 18 - 2,000 rpm Spindle stroke: 400 mm Laedoy Ia Azjpfx Abzog Maximum horizontal arm travel: 1,250 mm Maximum spindle to floor plate distance: 1,600 mm Equipped with: - Thread-cutting device - Drilling table Machine weight: 4,500 kg Machine dimensions (LxWxH): 2,800 x 1,000 x 3,500 mm

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, Year of manufacture: 1995 Type: DR 40 Z Machine number: 1205-3 Drilling capacity in steel: 40 mm Drilling capacity in cast iron: 50 mm Thread cutting in steel: up to M33 Thread cutting in cast iron: up to M45 Tool holder: MK 4 Spindle diameter: 55 mm Spindle travel: approx. 200–220 mm Spindle speeds: 18 steps, approx. 35–1,800 rpm Ledozx H Icjpfx Abzjag Feeds: 0.075–0.60 mm/rev Vertical adjustment: 450 mm Table: 1,200 × 600 mm Weight: Approx. 2,400 kg

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, power: 4 kW (5.44 HP), tool diameter: 50 mm, spindle mount: MK 5, height adjustment type: electric, rotational speed (max.): 2,500 rpm, rotational speed (min.): 28 rpm, total width: 1,145 mm, total length: 3,100 mm, total height: 3,390 mm, table width: 986 mm, table length: 1,820 mm, overall weight: 4,200 kg, Equipment: documentation/manual, Morse 5 taper in the spindle, max. drilling capacity in steel Ø 50 mm, arm length 1250 mm, base clamping surface 1820 x 986 mm, max. Ø boring capacity in steel – without guide: 120 mm, with guide: 200 mm, spindle stroke: 310 mm, vertical arm travel 750 mm, spindle speed: 16 steps, range: 28-2500 rpm, feed rate 0.05 - 2 mm/min, 16 steps, spindle motor power at 1430 rpm: 4 kW, total power consumption 6 kVA, machine dimensions L x W x H: 3100 x 1145 x 3390 mm, machine weight 4200 kg, the machine can be fully tested in our warehouse in Přerov upon agreement. Lsdpfx Abozzfbajzoag

Condition: used, Year of construction: 1976, Technical details: bore capacity in steel (diameter): 32 mm arm length: ./x. . 400 / 50 mm drill head horizontal traverse: 400 mm drilling head vertical adjustable: 400 mm bore spindle stroke: 150 mm spindle taper MT: 4 grinding spindle speed: 100 - 2000 U/min Arm length: Spindel: min./max: ca. 400 / 50 mm cantilever adjustment vertical: 850 mm cantilever adjustment horizontal: 400 mm arm: Länge: 1360 arm horizontal: schwenkbar mm/min number of revolutions per minute of drill spindle:: 100...2 step U/min. feed steps: 0,1 / 0,2 / - step mm/U Table dimensions: 00 x 510 mm distance table - lower edge spindle: min./max.: 350 / 800 mm total power requirement: 2,4 kW weight of the machine ca.: 1,8 t Lasdowi Iqvepfx Abzsg dimension machine xH: 1,3 x 1,3 x 2,25 m Equipment: 2x foot rail Attachment option for a vertical table Accessories: Various clamping devices *

Condition: used, Year of construction: 2007, bore capacity in steel (diameter) 40 mm arm length 1050 mm turning speeds 15 - 2800 U/min feed range 0,075 - 0,45 mm/min dimensions 2450 x 1300 x 2300 mm Weight 1500 kg Equipment: Machine in top condition 2026 serviced and repaired by the factory customer service Machine design - Work table 1800 x 600 mm with 4T-slots - Boom travel 1050 mm - SK 40 drilling spindle with tool clamping device - Infinitely variable speed programming - Infinitely variable quill feed via three-phase servo motor - 2 T-slots 18 mm on the machine base at the rear - 2 T-slots 18 mm on the left machine base frame - Thread cutting device - Central lubrication - Coolant device - Machine light - CE marking - Safety device - USB interface Dimensions and travels Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle bottom edge - min mm 70 Table top edge max. mm 680 Distance spindle bottom edge - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Worktable height mm 900 Cutting values Drilling capacity into solid St 60 ? 40 GG 22 ? 50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100 % ED. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 - 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7,5 / 7,5 / 5 Rapid traverse speeds (W): m/min. 3 Feed rates stepless mm/min 5 - 2000 Accuracy Positioning accuracy X-, Y-axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Laodpjy Nd T Hjfx Abzsg Axes: 3 (X, Y, Z, ) Processor: 32-bit CPU Screen: TFT flat screen, backlit, easy to read from all sides readable from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental measurements, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Standard software options: Programming in dialog, 38 zero offsets, rotation and mirroring, teach-in for X,Y,Z, restart in program with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for by manually probing the workpiece for: - any clamped rectangular parts - any clamped round parts - Mediation of cast and flame-cut parts - Angular position detection for round parts by touching reference edges or surfaces Test graphic Graphic display of drilling patterns

Condition: used, Year of construction: 1990, machine/vehicle number: 2316-3, Lg.no. 10622 Technical data: - Drilling capacity into solid steel ST 60 28 mm Lodpfeu Et Nbex Abzsag - Drilling capacity GG 25 40 mm - Thread cutting ST 60 M 30 - Thread cutting GG 25 M 40 - Drill spindle holder MK 3 - Spindle diameter 50 mm - Quill stroke 150 mm - 18 drilling spindle speeds 45 - 2240 rpm - 4 drilling feeds 0.1 - 0.45 mm - min. / max. distance spindle - table 300 / 700 mm - Drilling radius min / max 305 / 1005 mm - Table height 820 mm - Table size 1200 x 600 mm - Drive 400 V / 6 kW - Space requirement approx. W 1300 x H 2800 x D 2300 mm - Weight approx. 1500 kg - with: - Thread cutting device - hydr. columns + boom clamping - Coolant device - Vertical T-slots on the left side of the machine

Condition: good (used), Asquith radial drilling machine offered. Type: ODI X-travel: 910 mm Z-travel: 640 mm Stroke spindle: 350 mm Diameter spindle: 65 mm Speed max: 1550 RPM Laedpjh U Iaxjfx Abzog Table: 510 x 1000 mm Bed: 1280 x 795 mm Dimensions: 240x125x293 cm LxWxH For more information call us or send an e-mail.

Condition: used, Technical details: bore capacity in steel (diameter): 32 mm arm length:: 1000 workpiece height max.: - mm column diameter: 300 mm horizontal adjustment of the boring slide: 400 mm distance table - lower edge spindle: 200 mm spindle taper MT: MK 4 bore spindle stroke: 200 mm range of revolutions per minute - continous: 18steps 14-710 U/min swivel range of the arm: 360 Grad feed: 0,09/0,12/0,25/0,5 mm/U weight of the machine ca.: 2,0 t dimension machine xH: 2,4 x 0,9 x 2,4 m Transportable! Operation via pressure switch Support feet 4x D=16x30mm Height-adjustable 60 mm with ratchet wrench Lajdpfsv S Ay Ssx Abzog *

Condition: new, Year of construction: 2026, functionality: fully functional, New KAO MING hydraulic radial drilling machine, year of construction 2026. Specifications: Maximum distance between spindle center and column face: 1250mm Minimum distance between spindle center and column center: 360mm Column diameter: 350mm Column height: 2685mm Base floor space: 2035x840mm Total floor space: 2335x1140mm Base height: 188mm Spindle head longitudinal travel: 890mm Vertical arm travel: 700mm Spindle travel: 300mm Spindle taper: MK5 Table work area: 1393x820mm Main spindle motor: 3.7kW (5hp) Spindle speeds: 25–1310rpm (12 steps) Laedpoykkhxefx Abzeg Feed range: 0.06mm/rev to 1.12mm/rev (12 steps) Drilling capacity in cast iron: 60mm Drilling capacity in steel FC20/S45C: 50mm Weight: 3460kg

Condition: good (used), 1 used quick-change radial drilling machine Manufacturer: Donau Type: DR 28 Z Year of manufacture: 1985 Technical data: - Drilling capacity in full steel ST 60: 28 mm - Drilling capacity in cast iron GG 25: 40 mm - Thread cutting in steel ST 60: M 30 - Thread cutting in cast iron GG 25: M 40 - Drill spindle taper: MK 3 - Spindle diameter: 50 mm - Quill stroke: 150 mm - 18 drill spindle speeds: 45 - 2240 rpm - 4 drilling feed rates: 0.1 - 0.45 mm - Min./max. distance spindle – table: 300 / 700 mm - Drilling radius min/max: 305 / 1005 mm - Table height: 820 mm - Table size: 1200 x 600 mm - Drive: 400 V / 6 kW - Space requirement approx.: W 1300 x H 2800 x D 2300 mm - Weight approx.: 1500 kg Laedpfxjzl Ufco Abzsg - Including: - Thread cutting device - Hydraulic column and boom clamping - Coolant system - T-slots, vertical, on the left side of the machine

Condition: good (used), Year of construction: 1995, 1 used radial drilling machine Manufacturer: Breda Type: R 55 / 1250 Technical data: Drilling capacity: 55 mm Overhang: 1200 mm Drill spindle taper: MK 5 Drill spindle stroke: 310 mm Spindle speeds, 12 steps: 30 - 1200 rpm Right-hand and left-hand rotation Feed rate, 8 steps: 0.06 - 1 mm/rev Drive power: 4.4 kW Vertical movement of the arm: 705 mm Clamping of the arm and drilling unit: hydraulic Usable machine bed with 4 T-slots: 1325 x 910 mm Lodpfozlgvtex Abzjag Coolant system Space requirement: approx. L 2100 x H 2500 x W 1000 mm Weight: approx. 3000 kg

Condition: excellent (used), Caser radial drill mod. F50-1250 complete with cube Laedpfxev Hngmo Abzjg

Condition: used, Radial drilling machine WEBO Type R4bR Serial No. 15 / E195 Year of manufacture: approx. 1965 Drilling capacity: 50 mm Spindle taper: MT 5 Maximum spindle outreach: approx. 1250 mm (to column) Clamping surface: 1400 x 1000 mm Column diameter: 315 mm Spindle speed: 30 - 1325 rpm, 9 steps Feed: 0.12 - 2 mm/rev, 9 steps Electrical connection: 380 Volt, 50 Hz - Spindle speed in 9 steps Ledou T Ty Hopfx Abzjag - Motorized height adjustment of the boom Required floor space for operation (L x W x H): 220 x 100 x 285 cm Transport dimensions (L x W x H): 220 x 100 x 260 cm (without motor for height adjustment) Weight: approx. 2.8 t.

Condition: used, Year of construction: 1990, Radial Drilling Machine KOLB KR 55 Year of construction: 1990 Spindle Ø 80 mm Cone CM5 Spindle exit: 400 mm Rotation: from 18 to 2000 RPM Table size: 1800 x 1000 mm Arm travel: 1250 mm Auto descent Auto rise according to the 0 setting Ljdpfx Ajzw Aqkobzoag Maxi distance spindle nose/table: 1500 mm Mini distance spindle nose/table: 800 mm Column diameter: Ø 315 mm Drilling/tapping function Rotation at 360° Possibility of sensory drilling Automatic gearbox Lubrification Hydraulic locking Voltage: 380 V Dimensions (L x W x H): 2900 x 1100 x 3060 mm Weight: approx 5 T

Condition: good (used), Year of construction: 2014, Offer 26252 Lodpfxozwftzs Abzsag Technical data: - Drilling capacity in full steel ST 60: 22 mm - Drilling capacity GG 25: 32 mm - Thread cutting ST 60: M 20 - Thread cutting GG 25: M 24 - Drill spindle mounting: MK 4 - Quill stroke: 140 mm - 18 drill spindle speeds: 60 - 3050 rpm - Drilling feed, stepless: 0.075 - 0.15 - 0.70 mm/rev - Drilling radius min / max: 420 / 1320 mm - Swivel angle: 320° - Table size: 1200 x 600 mm - Table height: 905 mm - Motorized height adjustment / stroke of the drill column: 430 mm - Hydraulic column and arm clamping - T-slots, vertical, on the left side of the machine - Coolant system - Drive: 400 V / 1.1 / 1.6 kW - Space requirement: approx. W 1300 x H 1910 / 2340 x D 2700 mm - Weight: approx. 1800 kg

Condition: good (used), Hello, For sale: RF-50/1250 radial drilling machine. The machine is in working condition, currently in continuous operation, and can be inspected and tested on site. The price listed in the advertisement is net and VAT must be added. The machine can be viewed in Starachowice at 13 Kwiatkowskiego Street. Telephone contact available from 7:00 to 16:00. Laedpfx Abexykctezog

Condition: good (used), Year of construction: 1985, spindle turning speed - stepless 26 - 1650 U/min voltage 380 V 0 50 Hz rated current 15 A connected load 6,5 kW tool taper MK 4 weight of the machine ca. 2,3 t dimensions of the machine ca. 1500 x 1200 x 2500 mm Operating voltage: 380 V Frequency: 50 Hz Control voltage: 220 V Rated current: 15 A Connection: 6.5 kW Automatic feed: 0.05 - 0.45 mm/rev Column lifting speed: 40 mm/s Column stroke: 450 mm Drilling spindle stroke: 200 mm Drilling zone: 430 - 1150 mm Height adjustment of the drilling spindle: 330 - 780 mm Tool holder: MK 4 Table dimensions: 1525 x 560 mm Laodpfjvylh Usx Abzjg Table height: 800 mm