Used Plateg Pp120/40 for sale (21,958)

Condition: used, mileage: 1,000,820 km, power: 220 kW (299.12 HP), first registration: 01/2011, fuel type: diesel, number of seats: 40, gearing type: automatic, emission class: euro5, color: beige, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle subject to final sale, errors, typos, and prior sale: Mercedes Benz Citaro O530 Ü 100 Km/h (40+1+3 emergency seats) with seatbelts, full air conditioning (Vehicle 729) First registration: 18.01.2011 1,000,820 km Engine: 11,967 ccm 220 kW / 300 hp Bluetec 5 EEV MOT valid until 10/2026, TÜV (technical inspection) valid until 04/2027 Permissible gross vehicle weight (GVW) 18,600 kg, unladen weight 11,760 kg, payload 6,840 kg Overall length 11,950 mm x overall width 2,550 mm x overall height 3,400 mm Tires 275/70R22.5, front approximately 90%, rear approximately 40/40% Double doors front and rear Driver's cab with door Ramp Fully automatic transmission Microphone Electric windows 2 x electric + heated mirrors Full air conditioning Auxiliary heating + 2nd heater Stop brake 40+1+3 emergency seats Emergency exit Fsdez H Ecfjpfx Akysgh 12-volt socket Chassis with slight surface rust 01.12.2024: Air suspension on the rear axle, left side, replaced 20.02.2024: Air conditioning compressor replaced 20.03.2024: Axle ventilation replaced ABS sensor on the rear axle, right side, replaced with sealant Rear axle hub replaced Front axle triangular wishbone replaced 06.05.2024: Rear axle, right side, sensor replaced 10.07.2024: Triangular wishbone, right side, lower arm replaced Air suspension on the rear axle, left side, rear, replaced Multi-circuit safety valve replaced 24.09.2024: Water hose for transmission cooler, thermostat, and water filter replaced 08.08.2025: Front axle brake pads replaced 08.08.2025: Rear axle brake pads replaced 06.01.2026: 6 x valve covers replaced 20.02.2026: Seal between crankshaft and flywheel replaced Stabilizer bar on rear axle replaced Various signs of wear and tear, consistent with age Last inspection on 02.10.2025 at 974,472 km, next inspection due at 1,034,472 km Price: 8,500.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to €10,000 is the district court of Ludwigslust; for disputes exceeding this amount, it is the regional court of Schwerin. Errors, typos, and prior sale are subject to change.

Condition: used, functionality: fully functional, Year of construction: 2007, The Soilmec SR-40 is a compact, highly versatile hydraulic rotary piling rig built on a Caterpillar base carrier, designed specifically for deep foundation works, urban construction, and restricted job sites Fsdpfxjz H Ud Eo Akyogh

Condition: used, machine/vehicle number: NP8FA99W3N0000319, empty load weight: 6,820 kg, maximum load weight: 32,180 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 09/2022, total length: 12,890 mm, total width: 2,550 mm, total height: 3,660 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 60 %, color: red, #Vehicle Data - Make: Özgül Fgodpjzyf Tgjfx Akyeh - Model: F - First registration: 08.09.2022 - Colour: RAL 3020 red - Vehicle class: Semi-trailer - Product group: Container chassis semi-trailer - Number of axles: 3 - Running gear: Wheels (385/55 R22.5") - Chassis height: 135 cm #Weights and Dimensions - Gross vehicle weight: 39.000 kg - Payload: 32.180 kg - Kingpin load: 12.000 kg - Vehicle length: 12.890 cm - Vehicle width: 2.550 cm - Vehicle height: 3.660 cm - Unladen weight: 6.820 kg #Body-specific Information - Vehicle type: Container chassis semi-trailer - Container sizes: 1x40 ft, 2x20 ft, 1x30 ft - Internal loading length: 11.985 cm - 2x landing legs front and rear (painted black) #Axles and Tyres - Axle make: SAF 9 Ton CD Off-Road - Tyres: Single tyres - Axle load, axle 1: 9.000 kg - Axle 1: Lift axle - Brakes, axle 1: Disc brakes - Tyre size, Bridgestone brand, 385/65R 22.5" - 1x spare tyre, Bridgestone brand (385/65 R22,5") #Braking System - WABCO EBS (2S/2M) with RSS in accordance with EC Directive, ADR-adapted - Compressed-air brake cylinders: 2 axles with 4 combined brake cylinders (tristop/spring brake cylinders) - 1 axle with 2 diaphragm brake cylinders (service brake cylinders) #Electrics - 24 Volt, multi-chamber LED lights, yellow LED side marker lights, LED number plate light - 2 white LED front position lights - 2 white/red LED rear outline marker lights - 2x 7-pin and 1x 15-pin anti-mismatch sockets at the front, without connecting cable - 1 additional LED work light at the rear, switched via reversing light #Cylinder - Manufacturer: Hidromas - Model/type: GHS 175-5-9125 H-Typ - Number of stages: 5 - First-stage diameter: 175mm / total stroke: 9125mm - Operating pressure (working pressure): 170 bar - Max. operating pressure: 190 bar - Cylinder material: ST 52 (E355), cold-drawn precision steel tubes #Accessories - 2x wheel chocks with holder - 2x side impact protection, aluminium - Rear underrun protection - 6x half-shell mudguards with 6x small anti-spray flaps and 1x large - 1x fire extinguisher holder - 1x water tank (60l) - 4x lashing rings - 2x warning reflectors, at the rear and on each side

Condition: used, mileage: 573,064 km, power: 213 kW (289.60 HP), first registration: 12/2013, fuel type: diesel, number of seats: 38, gearing type: automatic, next inspection (TÜV): 06/2027, emission class: euro5, color: white, brakes: retarder, Equipment: ABS, electronic stability program (ESP), soot filter, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle, subject to final sale, errors, typos, and prior sale: MAN Lions City LE A78, 38+40+1 + 2 emergency seats (Vehicle 117) First registration: December 16, 2013 573,064 km Engine: 6,871 cc 213 kW / 289 hp Euro 5 EEV Next inspection: 12/2026, TÜV (technical inspection): 06/2027 Permissible gross vehicle weight: 19,500 kg, unladen weight: 11,255 kg, payload: 7,245 kg Overall length: 11,895 mm x overall width: 2,550 mm x overall height: 3,225 mm Double doors at the front and rear Driver's cab with door 38+2 emergency seats + 40+1 Fold-out ramp Auxiliary heater + 2nd heater Retarder Fully automatic transmission Microphone 2 x electric mirrors + mirror heating 12-volt socket Emergency stop Stop-and-go brake Driver's seat ISRI with heating and ventilation Fjdpjz Id Snjfx Akyegh Lawo Tires: 275/70R22.5, front approx. 80%, rear approx. 60/60% Small dent/scratch on the driver's side, center September 18, 2024: New radiator, June 23, 2025: New thermostat, flange below sealed, front axle brake pads replaced, September 16, 2025: Steering housing, star cover, water pump, crankshaft seal sealed Various signs of wear and tear, consistent with the age Good overall condition Last inspection at 555,260 km on July 15, 2026, next inspection at 615,260 km Price: €12,000.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to a value of €10,000 is the Ludwigslust District Court; for disputes exceeding this value, it is the Schwerin Regional Court. Subject to errors, typos, and prior sale.

Condition: used, mileage: 599,947 km, power: 213 kW (289.60 HP), first registration: 12/2013, fuel type: diesel, number of seats: 38, gearing type: automatic, next inspection (TÜV): 07/2027, emission class: euro5, color: white, brakes: retarder, Equipment: ABS, electronic stability program (ESP), soot filter, In accordance with our "General Terms and Conditions," without any warranty whatsoever, we can offer you the following vehicle on a non-binding basis until the conclusion of the sale, subject to errors, typographical errors, and prior sale: MAN Lions City LE A78, 38+40+1 + 2 emergency seats (Vehicle 115) First registration: December 16, 2013 599,947 km Engine: 6,871 cc 213 kW / 289 hp Euro 5 EEV MOT until 10/2026, technical inspection until 07/2027 Permissible total weight: 19,500 kg, unladen weight: 11,285 kg, payload: 7,215 kg Overall length: 11,895 mm x overall width: 2,550 mm x overall height: 3,225 mm Double doors at the front and rear Driver's cab with door 38+2 emergency seats + 40+1 Fold-out ramp Auxiliary heater + 2nd heater Retarder Fully automatic transmission Microwave 2 x electric mirrors + mirror heating 12-volt socket Emergency exit Stop brake Driver's seat ISRI with heating and ventilation Lawo system connected to the cash register Tires: 275/70R22.5, front approx. 60%, rear approx. 80/80% Various signs of wear and tear, consistent with the age Good overall condition Fgjdpoz Iihuofx Akyjh Last inspection at 565,195 km on April 23, 2025, next inspection at 625,195 km January 20, 2025: Air reservoir replaced. October 2, 2025: Head gasket + valve cover gasket + engine mount on the passenger side rear replaced. January 28, 2026: Brake pads on the front axle replaced, brake caliper on the front axle, driver's side, replaced. Price: €12,000.00 (net) All information is provided without any warranty whatsoever. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to a value of €10,000 is the district court of Ludwigslust; for disputes exceeding this value, it is the regional court of Schwerin. Subject to errors, typographical errors, and prior sale.

Condition: like new (used), Year of construction: 2003, x-travel 850 mm y-travel 700 mm z-travel 500 mm Control Heidenhain iTNC 530 tool taper HSK 63 voltage 400 V control voltage 24 V weight of the machine ca. 10,5 t - Current configuration C 40 U: o Vertical machining center o 4 axes o Travel ranges: X 850 mm, Y 700 mm, Z 500 mm o Table size: X 1070 mm, Y 700 mm o Carousel tool magazine, 40 positions o Max. tool length in magazine: 300 mm o Spindle: HSK63, 10,000 rpm, 25 kW, 159 Nm o Coolant system: AK, IKZ 40 bar, 1,000-liter capacity, steel filter o Blow-off air IK & AK o MMS system MHT o Scraper belt chip conveyor o Polycarbonate disc without Rotoclear o Heidenhain iTNC 530 machine control Fedpfx Aez Ebraekysgh o Emulsion mist extraction (Preparation) o Installation dimensions with coolant system: 3,930 mm x 4,400 mm x 3,040 mm o Laser measurement system for tools, including breakage detection o 3D measuring probe o Spindle hours: 14,578 h o Machine hours: 47,069 h

Condition: good (used), Used pillar drill from Bimak Model 40 Capacity 40 mm Fodpfoz H Uz Djx Akysgh

Condition: good (used), Year of construction: 2015, Capacity: 100 l Fgodsz D T R Sepfx Akysh

Condition: used, mileage: 957,684 km, power: 220 kW (299.12 HP), first registration: 01/2008, fuel type: diesel, number of seats: 40, gearing type: automatic, next inspection (TÜV): 12/2026, emission class: euro5, color: green, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, In accordance with our "General Terms and Conditions," without any warranty or liability, we can offer you the following vehicle, subject to final sale, errors, typographical errors, and prior sale: MB Citaro O530 LE 40+56+1+1 (Vehicle No. 260) First registration: January 29, 2008 957,684 km Engine: 11,967 ccm 220 kW / 300 hp Bluetec 5 Fgedpfx Akezvty Tsyoh MOT valid until: 12/2026 Permissible gross vehicle weight: 18,000 kg / 19,000 kg Unladen weight: 11,450 kg Payload: 6,550 kg Overall length: 12,040 mm x Overall width: 2,550 mm x Overall height: 3,400 mm 40 seats, 56 standing places, 1 wheelchair/walker space, 1 driver's seat Manually folding ramp for strollers/wheelchairs Single door at the front, double door at the rear Fully automatic transmission Microwave Electric windows + mirrors Lawo Topform CU 3 Radio/CD Tachograph Air conditioning + auxiliary heating Retarder Tires: Front 275/70R22.5, approx. 90/90%, Rear 275/70R22.5, approx. 30/30% Price: €5,500.00 (net) All information is provided without any warranty or liability. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to €10,000 is the Ludwigslust District Court; for disputes exceeding this amount, it is the Schwerin Regional Court. Subject to errors, typographical errors, and prior sale.

Condition: excellent (used), operating hours: 8,640 h, Maximum height 260 mm Turning length 600 mm Max. swing diameter over bed 400 mm Max. swing diameter over cross slide 225 mm Cross travel 260 mm Longitudinal travel 660 mm Spindle head DIN Size 140 h5 Spindle bore 68 mm Speed range 25 – 4000 rpm Feed rate range, longitudinal and cross 0.5 – 5000 mm/min Rapid traverse, longitudinal and cross 9 m/min Tailstock taper MK 4 Tailstock quill travel 100 mm Main drive 22 kW Dimensions L x W x H approx. 3600 x 1720 x 1650 mm Weight 3200 kg Accessories / Special features: • CNC control GILDEMEISTER EPL 2 • Electronic handwheel • RS 232 interface • Hydraulic 3-jaw chuck, diameter 200 mm • 12-station tool turret, manufacturer SAUTER, internal coolant supply, VDI 30, mounting bore Ø 30 mm, DIN 69880 • Articulated chip conveyor with coolant system • Electr. foot switch for hydraulic 3-jaw chuck and hydraulic tailstock quill Fodpfxsz Icuzj Akyegh • Various tool holders • Lighting Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, mileage: 602,638 km, power: 213 kW (289.60 HP), first registration: 12/2013, fuel type: diesel, number of seats: 38, gearing type: automatic, next inspection (TÜV): 09/2027, emission class: euro5, color: white, brakes: retarder, Equipment: ABS, electronic stability program (ESP), soot filter, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle, subject to final sale, errors, typos, and prior sale: MAN Lions City LE A78, 38+40+1 + 2 emergency seats (Vehicle 119) First registration: 16.12.2013 602,638 km Engine: 6,871 cc 213 kW / 289 hp Euro 5 EEV MOT valid until 12/2026, technical inspection valid until 09/2027 Permissible gross vehicle weight: 19,500 kg, unladen weight: 11,270 kg, payload: 7,230 kg Overall length: 11,895 mm x overall width: 2,550 mm x overall height: 3,225 mm Double doors at the front and rear Driver's cabin with door 38+40+2 emergency seats + 1 Fold-out ramp Auxiliary heater + 2nd heater Retarder Fully automatic transmission Microwave 2 x electric mirrors + mirror heating 12-volt socket Emergency stop Stop-at-stops brake Driver's seat ISRI with heating and ventilation Lawo ticketing system Tires 275/70R22.5, front approximately 40%, rear driver's side approximately 80/80%, passenger side approximately 40/40% Fgsdpfjz Id Szsx Akyoh 14.05.2024: Air tank replaced. 27.09.2024: Engine mount on the left replaced, brake pads on front and rear axles replaced, front left brake caliper replaced, spring accumulators replaced, oil change due. Various signs of wear and tear, consistent with age. Good overall condition Last inspection at 548,085 km on 27.09.2024, next inspection at 608,085 km. Price: € 12,000.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties is the local court of Ludwigslust for disputes up to a value of € 10,000. For disputes exceeding this value, the district court of Schwerin applies. Errors, typos, and prior sale are subject to change.

Condition: used, filter Fodoz Icadspfx Akysgh Plates maximum: 100 Plate formats: 400x400 Platefilter features: Electric-Hydraulic press dimension ca. 300x60x110 cm Distance between first plate and spindle approx ca. 160cm

Condition: used, mileage: 872,108 km, power: 220 kW (299.12 HP), first registration: 01/2008, fuel type: diesel, number of seats: 40, gearing type: automatic, next inspection (TÜV): 12/2026, emission class: euro5, color: green, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle on a non-binding basis until a contract is concluded, subject to errors, typographical errors, and prior sale: MB Citaro O530 LE 40+56+1+1 Fodpfx Akjzvtytoyjgh (Vehicle 269) First registered: 29.01.2008 872,108 km Engine: 11,967 ccm 220 kW / 300 hp Bluetec 5 TÜV (technical inspection): 12/2026 Permissible total weight: 18,000 kg / 19,000 kg Unladen weight: 11,450 kg Payload: 6,550 kg Overall length: 12,040 mm x Overall width: 2,550 mm x Overall height: 3,400 mm 40 seats, 56 standing places, 1 wheelchair/walker space, 1 driver seat Manually foldable stroller/wheelchair ramp Single door at the front, double door at the rear Fully automatic transmission Microwave Electric windows + mirrors Lawo Topform CU 3 Radio/CD Tachograph Air conditioning + auxiliary heater Retarder Tire size front: 275/70R22.5, approx. 90/90%, rear: 275/70R22.5, approx. 30/40% Price: € 5,500.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to a value of € 10,000 is the local court of Ludwigslust; for disputes exceeding this value, it is the regional court of Schwerin. Subject to errors, typographical errors, and prior sale.

Condition: used, empty load weight: 7,396 kg, maximum load weight: 31,604 kg, overall weight: 39,000 kg, axle configuration: > 3 axles, first registration: 07/2014, next inspection (TÜV): 10/2027, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,900 mm, loading space volume: 97 m³, total length: 13,620 mm, suspension: air, tire size: 455/40 22,5, tire condition: 50 %, color: white, Year of construction: 2014, front tire size: 455/40 22,5, rear tire size: 455/40 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, and errors. More pictures and videos can be found on our website. Our extensive services include, for example: * Purchase / sale / rental of commercial vehicles * Fast and uncomplicated financing * Application for all (export) documents * Ordering of export license plates / customs license plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading / cargo securing * TÜV inspections, registration service * Transport of commercial vehicles Fodpfx Ajzyx Iqjkyogh Ask our trained specialists, we will be happy to advise you.

Condition: used, mileage: 1,154,633 km, power: 220 kW (299.12 HP), first registration: 01/2008, fuel type: diesel, number of seats: 40, gearing type: automatic, next inspection (TÜV): 12/2026, emission class: euro5, color: green, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle today, subject to final sale, errors, typographical errors, and prior sale: MB Citaro O530 LE 40+56+1+1 (Vehicle No. 255) First registration: January 29, 2008 Mileage: 1,154,633 km Engine: 11,967 ccm Power: 220 kW / 300 hp Bluetec 5 MOT (Technical Inspection): 12/2026 Permissible gross vehicle weight: 18,000 kg / 19,000 kg Unladen weight: 11,450 kg Payload: 6,550 kg Overall length: 12,040 mm x Overall width: 2,550 mm x Overall height: 3,400 mm 40 seats, 56 standing places, 1 wheelchair/walker space, 1 driver seat Manually folding ramp for strollers/wheelchairs Single door at the front, double door at the rear Fully automatic transmission Microwave Electric windows + mirrors Fodpfx Akszvtygeyjgh Lawo Topform CU 3 Radio/CD Tachograph Air conditioning + auxiliary heater Retarder Tire size front: 275/70R22.5, approx. 60/50%, rear: 275/70R22.5, approx. 90/90% Skirt will be installed Price: € 5,000.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to a value of € 10,000 is the district court of Ludwigslust; for disputes exceeding this value, it is the regional court of Schwerin. Errors, typographical errors, and prior sale are subject to change.

Condition: used, Year of construction: 2010, The Horizon AFC 566 FKT + PST-40 folding machine, manufactured in 2016, is a high-performance solution for efficient and precise folding operations. Currently in production and located in Germany, this machine is designed to handle a wide range of sheet sizes, from a minimum of 60 x 64 mm to a maximum of 558 x 850 mm, with a maximum mechanical speed of 240 m/min (30,000 cycles/h). Equipped with a flat pile feeder capable of handling a maximum pile height of 740 mm, it ensures continuous and efficient paper feeding. The primary folding unit is an AFC-566 FKT with 6 combi folding plates, offering manual pocket and roller configuration. It features a used condition roller and a cross fold unit with 1 knife, providing versatile folding options with a maximum working width of 558 mm and a maximum fold length of 850 mm. The machine also includes a noise protection hood and touch screen control for ease of operation. The delivery mode is a PST-40 press delivery, manufactured in 2010 with the serial number 360003. It has a maximum working width of 440 mm and a pressing force of 20,000 N, ensuring efficient and organized output handling. This machine is well-suited for businesses seeking to enhance their folding capabilities with a reliable and high-performance solution. Format: 440 x 310 mm Equipment: Feeder Feeder Mode: Flat pile feeder Max. pile height: 740 mm Folding Units 1st unit Type: AFC-566 FKT Pockets: 6 Pocket Type: Combi folding plates Pocket Configuration: manual Rollers Configuration: manual Roller condition: used condition Working width max: 558 mm Fold length max: 850 mm Cross fold unit with 1x knife Noise Protection Hood Touch Screen Control Delivery Delivery mode: PST-40 Type: Press delivery Year: 2010 Serial number: 360003 Working width max: 440 mm Technical Details Fodpfxjwcqw Se Akysgh Sheet size max: 440 x 310 mm Sheet size min: 60 x 64 mm Infeed height min: 280 mm Mechanical speed max: 240 m/min Pressing force: 20,000 N Built-in controller Technical details: Sheet size max: 558 x 850 mm Sheet size min: 128 x 148 mm Max. mechanical speed: 240 m/min Max. mechanical speed (cycles): 30,000 cycles/h

Condition: used, mileage: 792,972 km, power: 220 kW (299.12 HP), first registration: 01/2008, fuel type: diesel, number of seats: 40, gearing type: automatic, emission class: euro5, color: white, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle, subject to final sale, errors, typographical errors, and prior sale: MB Citaro O530 LE 40+56+1+1 (Vehicle No. 250) First registration: January 29, 2008 752,972 km Engine: 11,967 cc 220 kW / 300 hp Bluetec 5 MOT (TÜV) valid until 09/2026 Permissible total weight: 18,000 kg / 19,000 kg Unladen weight: 11,450 kg Payload: 6,550 kg Overall length: 12,040 mm x overall width: 2,550 mm x overall height: 3,400 mm 40 seats, 56 standing places, 1 wheelchair/walker space, 1 driver's seat Manually folding ramp for strollers/wheelchairs Fgjdpfxszvtyme Akyoh Single door at the front, double door at the rear Fully automatic transmission Microwave Electric windows + mirrors Lawo Topform CU 3 Radio/CD Tachograph Air conditioning + auxiliary heater Retarder Front tires: 275/70R22.5, approx. 40/40% tread remaining; rear tires: 275/70R22.5, approx. 30/30% tread remaining Price: €5,500.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to a value of €10,000 is the district court of Ludwigslust; for disputes exceeding this value, it is the regional court of Schwerin. Subject to errors, typographical errors, and prior sale.

Condition: good (used), Year of construction: 2008, pressing force: 160 t, stroke length: 290 mm, overall weight: 11,000 kg, working width: 4,100 mm, distance between side stands: 3,550 mm, Brand: Dener Model: DMP 160/40 Fodowi Sktjpfx Akyjgh Year: 2008 Bending length: 4,100 mm Force: 160 tons 2 axes (Y, X) *Torsion bar machine, Y axis X stop: 650 mm Cylinder stroke: 290 mm Distance between uprights: 3,550 mm NC control: Dener HT062 Neck: 450 mm Motor power: 15 HP Weight: 11,000 kg

Condition: good (used), Heidelberg Cylinder KSB 40×57 Automatic die-cutter A very rare model on the market. The machine is ready to work, in very good technical condition. After inspection. Suitable for die-cutting. Central lubrication. Format 40×57 cm Weight 3500 kg Power supply 380 V Includes two drawers of additional elements, frame, sheet metal for the cylinder, fillers and typographic locks. Fgjdpfx Aksz N Sfteyoh

Condition: used, bore capacity in steel (diameter) . mm Fgodpfxsz E Svcs Akysh throat 368 mm bore stroke . mm feed 0,1-6,18 m/min table surface area 560x470 mm Thread-cutting device The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2013, x-travel 600 mm y-travel 530 mm z-travel 510 mm Control M 730 BM MAPPS IV max. spindle speed 10.000 min/-1 power capacity - main spindel 15 / 11 kW tool taper SK 40 transmission ratio 1 spindle diameter in front bearing 80 mm table surface area 900 x 600 mm max. table load 800 kg T-slots 6x 18 x 100 mm distance spindle /table 150 - 660 mm number of toolpositions 30 pos. Fedox R Enbepfx Akyegh tool taper SK 40 max. tool diameter 80 mm max. tool-dia with free toolbox 150 mm max. tool length 300 mm max. tool weight 8,0 kg change-time tool to tool ca. 1,3 sec change-time chip to chip ca. 3,45 sec rapid traverse ( X / Y / Z ) 30 m/min feed speeds 1 - 30.000 mm/min Tipp feed 0 - 5.000 : 20 mm/min total power requirement 30 kVA weight of the machine ca. 6,0 t dimensions of the machine ca. 4,5 x 3,5 x 2,7 m CNC - Machining Center Vertical MORI SEIKI - NVX 5060 II / 40

Condition: new, Year of construction: 2025, Safo DNAA 160 Fedpfx Aozxhatokysgh Finished product diameter 40-160 mm New machine tool.

Condition: used, machine/vehicle number: NP8FA99W3N0000318, empty load weight: 6,820 kg, maximum load weight: 32,180 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 09/2022, total length: 12,890 mm, total width: 2,550 mm, total height: 3,660 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 60 %, color: red, #Vehicle Data - Make: Özgül - Model: F - First registration: 08.09.2022 - Colour: RAL 3020 red - Vehicle class: Semi-trailer - Product group: Container chassis semi-trailer - Number of axles: 3 - Running gear: Wheels (385/55 R22.5") - Chassis height: 135 cm Fgodpfxezyf Uqe Akyeh #Weights and Dimensions - Gross vehicle weight: 39.000 kg - Payload: 32.180 kg - Kingpin load: 12.000 kg - Vehicle length: 12.890 cm - Vehicle width: 2.550 cm - Vehicle height: 3.660 cm - Unladen weight: 6.820 kg #Body-specific Information - Vehicle type: Container chassis semi-trailer - Container sizes: 1x40 ft, 2x20 ft, 1x30 ft - Internal loading length: 11.985 cm - 2x landing legs front and rear (painted black) #Axles and Tyres - Axle make: SAF 9 Ton CD Off-Road - Tyres: Single tyres - Axle load, axle 1: 9.000 kg - Axle 1: Lift axle - Brakes, axle 1: Disc brakes - Tyre size, Bridgestone brand, 385/65R 22.5" - 1x spare tyre, Bridgestone brand (385/65 R22,5") #Braking System - WABCO EBS (2S/2M) with RSS in accordance with EC Directive, ADR-adapted - Compressed-air brake cylinders: 2 axles with 4 combined brake cylinders (tristop/spring brake cylinders) - 1 axle with 2 diaphragm brake cylinders (service brake cylinders) #Electrics - 24 Volt, multi-chamber LED lights, yellow LED side marker lights, LED number plate light - 2 white LED front position lights - 2 white/red LED rear outline marker lights - 2x 7-pin and 1x 15-pin anti-mismatch sockets at the front, without connecting cable - 1 additional LED work light at the rear, switched via reversing light #Cylinder - Manufacturer: Hidromas - Model/type: GHS 175-5-9125 H-Typ - Number of stages: 5 - First-stage diameter: 175mm / total stroke: 9125mm - Operating pressure (working pressure): 170 bar - Max. operating pressure: 190 bar - Cylinder material: ST 52 (E355), cold-drawn precision steel tubes #Accessories - 2x wheel chocks with holder - 2x side impact protection, aluminium - Rear underrun protection - 6x half-shell mudguards with 6x small anti-spray flaps and 1x large - 1x fire extinguisher holder - 1x water tank (60l) - 4x lashing rings - 2x warning reflectors, at the rear and on each side

Condition: good (used), Drilling capacity in steel St 37: Ø 40 mm Drilling capacity in cast iron: Ø 45 mm Spindle mount: MK 4 Overhang: 1300 mm Machine weight: 2700 kg Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 Fedpfx Aez Icr Hokyogh DE - 44143 Dortmund - Wambel / Germany

Condition: used, functionality: fully functional, Year of construction: 2007, operating hours: 20,544 h, load capacity: 7,500 kg, lifting height: 4,000 mm, fuel type: diesel, mast type: telescopic, construction height: 2,900 mm, fork carriage width: 1,460 mm, fork length: 1,500 mm, total length: 5,000 mm, drive type: Diesel, construction width: 2,350 mm, Side loader Load center: 600 ISO class: FEM 4B Mast type: Telescopic Fodpfjz If Drox Akysgh Transmission: Hydrostatic Technical condition: good Front tire type: Superelastic Front tire size: 2 x 355/65-15 Front tire condition: 20 - 40% Rear tire type: Superelastic Rear tire size: 2 x 355/65-15 Rear tire condition: 20 - 40% Battery year of manufacture: 2007 Additional single hydraulic circuit, integrated fork adjustment device, full cabin with heater, DPF diesel particulate filter, 2 x work lights at the front.