Used Piovan Thw9 (2016) for sale (1,771)

Condition: used, Year of construction: 2016, Overview  This atmospheric filler was manufactured by Borelli in 2016 and is in good and well-maintained condition. The machine is still installed and can be viewed and tested in person at any time. Technical details  - Filling valves: 10 - Filling principle: Atmospheric - Bottle formats: 0.33L (0.75L possible if with 26mm crown cap) Itodpfx Ajv Nhwkecyoi - Closure: 26mm crown cap - Output: 1,500 bottles/hour

Condition: used, Year of construction: 2016, Overview This filler was manufactured in 2016 by CIMEC and comes with an Arol crown capper. The filler has an output of 1,800 bottles per hour, processes bottle sizes from 0.33 l to 0.75 l and is in very good condition. The machine can be viewed in person at any time. Technical details  Filler | CIMEC | AM DPS 9-8-1C | 2016 - Output: 1,800 bottles/hour - Number of rinsing nozzles: 9 - Number of filling valves: 8 - Bottle sizes included: 0.33 l - 0.75 l (with other set also 0.5 l) - Electrical power: 6 kW, 400V, 50Hz - Dimensions Itodpfx Aevy D Adjcyei - Width: 1,400 mm - Length: 3,200 mm - Complete length with labeler: 8,800 mm - Operating hours: 1,370 hours - Complete documentation available Capper | Arol | TSI-Eagle C | 2016 - Pitch diameter: 410 mm - Number of heads: 1 - Type of closure: Standard crown cork - Complete documentation available

Condition: excellent (used), Year of construction: 2016, Solid fuel boiler. Very good condition. Operates with wood chips, wood waste, and sawdust. Ijdpfxoy Uzhro Acyjti

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, operating hours: 6,766 h, load capacity: 3,000 kg, lifting height: 4,900 mm, free lift: 1,700 mm, load center: 600 mm, fuel type: gas, mast type: triplex, construction height: 2,250 mm, motor manufacturer: Toyota 4Y, fork length: 1,065 mm, tire condition: 100 %, overall weight: 9,500 kg, empty load weight: 6,500 kg, total height: 2,250 mm, total length: 1,550 mm, total width: 1,500 mm, Equipment: adjustable boom, front guard, head guard, pallet forks, sideshift, Very good condition Fork positioner + sideshift Itedpezkkq Ejfx Acyji Toyota engine We sell forklifts after a full service. Prepared for the end user. Ready to use. We can arrange transport within Europe and worldwide.

Condition: used, Year of construction: 2016, operating hours: 12,415 h, total height: 2,200 mm, total length: 9,050 mm, total width: 1,200 mm, Colour: White Weight: 4.800 kg Price: On request - Year: 2016 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 109/1-606 - Operating hours: 12415 - Number of units [pcs]: 11 - └ 1st unit type: Pre-milling unit - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers Ijdszhrlfopfx Acyeti - - Type/Brand: 1914 - - Tools available: Yes - └ 4th unit type: Cap unit - - Type/Brand: KA701 - - Tools available: Yes - └ 5th unit type: Rough milling unit - - Type/Brand: 1828 - - Tools available: Yes - └ 6th unit type: Fine milling unit - - Type/Brand: FR701 - - Tools available: Yes - └ 7th unit type: Corner rounding unit - - Type/Brand: FF701 - - Tools available: Yes - └ 8th unit type: Radius scraping unit - - Type/Brand: ZK501 - - Tools available: Yes - └ 9th unit type: Flat scraping unit - - Type/Brand: 1856 - - Tools available: Yes - └ 10th unit type: Brushing unit - - Type/Brand: ES701 - - Tools available: Yes - Min. edge band thickness [mm]: 3 - Max. edge band thickness [mm]: 20 - Min. panel thickness [mm]: 8 - Max. panel thickness [mm]: 60 - Max. panel width [mm]: 65 - Min. panel length [mm]: 180 - Max. panel length [mm]: 250 - Min. feed speed [m/min]: 10 - Max. feed speed [m/min]: 25 - Feed speed control: Continuously adjustable - Glue system: Glue pot - Options: Return transport - Voltage [V]: 400 - Current consumption [A]: 45 - Transport dimensions: 9050mm x 1200mm x 2200mm (l x w x h) - Transport weight [kg]: 4800kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), mileage: 35,076 km, color: black, lifting height: 37,000 mm, Year of construction: 2016, operating hours: 3,725 h, Drivetrain Drive: Wheel Make of engine: MAN Weights Empty weight: 7.490 kg Functional Lifting capacity: 4.000 kg CE mark: yes Maintenance, history and condition Number of owners: 2 Technical condition: good Visual appearance: good Other information Front tyres / undercarriage remaining: 70 Rear tyres remaining : 70 Maximum lifting capacity at end of jib: 250 kg Emission level: Stage VI / Tier VI Delivery terms: EXW Latest inspection: 2025-04-14 Production country: DE Additional information Please contact Michael Overmeer for more information = Additional options and accessories = - Hook blocks Itsdpfx Acjy Sguxsyei = Remarks = Böcker AK 37/4000 montiert auf einen MAN TGL 7.180 with passenger basket, construction year 2016 with only 35.076 km and 3.725 hours. This vehicle is in nice condition (has been well maintained over the years) and has among other things: a passenger basket, automatic leveling, hydraulically folding support legs, hydraulic jip. Changes and typographical errors reserved.

Condition: good (used), Year of construction: 2016, operating hours: 985 h, mast type: telescopic, color: grey, General information Mileage: 29.748 km Drivetrain Make of engine: Nissan Weights Empty weight: 3.375 kg Functional Working height: 2.500 cm Make of bodywork: Klaas CE mark: yes Maintenance, history and condition Number of owners: 2 Technical condition: good Visual appearance: good Other information Front tyres / undercarriage remaining: 65 Rear tyres remaining : 65 Max. horizontal reach: 1900 m Latest inspection: 2026-05-01 Production country: DE Iedezhbnvspfx Acyjti Additional information Please contact Michael Overmeer for more information Klaas Theo 25 aerial work platform mounted on a Nissan Cabstar construction year 2016 with only 985 hours and 29.748 mileage. Last inspection at Klaas 05-2026. Machine is equipped with automatic leveling of the support legs and has a unique sideways range of 19 meters and a height range of 25 meters. Changes and typographical errors reserved.

Condition: used, Year of construction: 2016, Mazak Variaxis i-700 5 Axis CNC Machining Centre with Mazatrol Smooth X CNC Control. S/No. 276585 (2016), 700mm Diameter Work Table, Spindle Speeds Max 18,000rpm, Max Workpiece Size 850mm Diameter x 500mm x 700kg, 40 Tool ATC, CAT40 Spindle Taper, Absolent A Mist 10 Oil Mist Filter Extractor, Mazak Spindle Chiller Unit, Cromar Swarf Management & Filtration System, Machine Weight 15000kg. Country of Origin: Japan Please Note: Erowa Machining Fixture Not Included Itjdpfezi S T Sex Acyei Location: These lots are located in Gateshead, UK.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, year of last overhaul: 2025, For sale: Used, professional edge banding machine, Hebrock model AKV 3007 DK-F, manufactured in 2016, with additional equipment (detailed below). First owner. Overhauled last year (belt and drive rollers replaced, glue pot regenerated). The edge banding machine operated on one shift, 8 hours a day, from Monday to Friday. The machine is designed for efficient edge banding of furniture components with PVC, ABS, melamine, and veneer edges. This model is valued for its high-quality processing, robust construction, and the ability to operate in continuous mode. Price: 85,000 PLN net. Excellent condition - the machine is in full working order, regularly serviced, and ready for operation without any additional investment. VAT invoice 23%. Ready for pickup. The machine is available for viewing by prior appointment in Borów (83-332). Please contact us by phone for additional information, as well as videos and pictures of the machine in operation. Main parameters and specifications: - Gluing system: Top-mounted hopper for granules. The machine supports standard (EVA), polyurethane (PUR) glues, and zero-joint systems. - Edge dimensions: Edge banding from 0.4 to 3 mm thick on components from 10 to 60 mm thick. - Power supply and power: 400 V / 3 Ph / 50 Hz electrical connection. Maximum power consumption is 14 kW. - Aggregates: Equipped with a scraper, chamfering cutter, corner rounding cutter, profiling cutter, and polishing unit. - Additional equipment: Pneumatic edge alignment, optional interchangeable glue pot, front notching saw, free feed, front spraying, cleaning spray. Detailed description: Narrow band edge banding machine from the German company Hebrock with a system for applying glue to the edge of the component and edge banding with edges from 0.4 to 3 mm thick on components from 10 to 60 mm thick, as well as pre-milling the panel with diamond cutters. The machine is optimally equipped for each type of edge. The machine's equipment is fully utilized thanks to the computer and PLC control, which fully controls the individual aggregates. The patented Hebrock system in the edge milling aggregates (consisting of adjusting the lower and upper cutter from outside the machine – during operation), as well as the automatic adjustment between thin and thick edges, eliminates the need to open the rear housing, which results in significant time savings, comfort, precision, and user-friendly operation. Technical data: • Edge thickness: 0.4 – 3 mm • Component thickness: 10 – 60 mm • Max. edge height: 65 mm • Compressed air requirement: approx. 450 l/min • Feed speed: 7-11 m/min, 0.75 kW motor Itodpezizabjfx Acysi • Glue heating time: 6 min • Total power consumption: max. 14 kW • Electrical connection: 400V, 50Hz • Working height: 880 mm • Machine dimensions [mm]: 5850 x 1425 x 1520 • Machine weight: 1600 kg • Extraction nozzle diameter: ø 140 mm, • Required extraction performance: 24 m3/min • Min. air velocity in the extraction nozzle: 20 m/s • Required vacuum in the extraction nozzle: 1300 Pa

Condition: ready for operation (used), Year of construction: 2016, load capacity: 1,600 kg, Brand: Jungheinrich Model: EJE 116 Year of manufacture: 2016 Lifting capacity: 1600 kg Lifting height: 200 mm Fork length: 1150 x 540 mm Battery condition: 80% Includes internal charger Ijdpfezixwkex Acyoti Are you only looking for a new battery? We can also supply those. For more information, please contact us.

Condition: used, Year of construction: 2016, Overview  This rotary cold-glue labelling machine was manufactured in 2016 by Germany KRONES. The machine is designed for high-speed beverage bottling lines and is equipped with three cold-glue labelling aggregates for front, back and neck labels. The machine is used and still under power. Technical data Itedszhaadspfx Acyoi - Capacity: approx. 33,000 bottles/hour - Formats: - 0.75 GDB DN2 - 0.5 L longneck beer - 0.33 L longneck - 0.25 L individual bottle - Application: Cold-glue labelling of beverage bottles - Configuration: 2.400-40-188.5, 3 cold-glue labelling aggregates - Label positions: Front, back, neck - Integrated systems: Domino coding system, Krones Checkmat 731 inspection system, Plasmatreat for seal label

Condition: used, Year of construction: 2016, Makino A51NX in very good condition, including a new ATC tool changer and Cubes. Approx. 11,000 hours of cutting time. Capacity & Travels: Pallet Size: 400 × 400 mm X-Axis Travel: 560 mm Y & Z-Axis Travel: 640 mm Max. Workpiece: ∅ 630 mm × 900 mm Max. Payload Capacity: 400 kg Spindle: Spindle Speed: 15,000 RPM Spindle Taper: HSK-A63 Motion & Feed Rates: Rapid Traverse Rate: 60,000 mm/min (1,968 ipm) Cutting Feedrate: 50,000 mm/min Axis Acceleration: 1G B-Axis Indexing: Full 4th axis, Direct Drive (0.001-degree increments) Tooling: ATC (Automatic Tool Changer) Capacity: 60 tools Tool-to-Tool Time: 0.9 seconds Max. Tool Diameter / Weight: 170 mm / 12 kg 04003 HSK-A63 Spindle – Replaces the standard ISO50 interface. Features a double taper, full face contact, and hollow shank interface. Tool clamping force is higher than 44kN; HSK tool holders are required. 14017 HSK holders for 60 Tool ATC 26001 Moire Scale Feedback X, Y, Z-Axis Increments 0.05µm, positioning tolerance Tp = 0.006mm (ISO 230-2). 29006 Through Spindle Coolant 3.0MPa – Provides TSC flow of 30 l/min at 3.0MPa, replacing the standard 1.5MPa. Air through the spindle is possible. The pressure data refers to the output flange of the pump. 29009 Flow Switch for Through Spindle Coolant – Monitors through-spindle coolant flow. The machine will feed hold if the flow is below a preset level. Note: Recommended option for filtration systems to prevent tool damage. 31002 Air curtain for splash guard window – Located in the middle of the operator-side window, this air curtain prevents chips and coolant from obstructing the view. 37000 Broken tool sensor outside machining area (BTS) – Tool breakage detection for centric tools (tool diameter 1-40mm, tool length 65 - 430mm). Length measurement is performed using a movable probe. The measurement takes place in the ready position for a tool change, outside the machining area. Accuracy ± 2mm. If there is a difference between the measurement before and after machining, an alarm is triggered automatically. 37101L Automatic Workpiece Measuring Device (RENISHAW OMP60) – Three-coordinate measuring probe from RENISHAW with automatic coordinate correction. The signal is transmitted via infrared. Tolerance approx. 0.005mm. 14 automatic measurement cycles are available as pre-programmed cycles in the program memory. Note: requires 13m. Control Options: Iedpezg N E Hefx Acyeti 60001 Automatic Corner Override (G62) – Automatically decelerates the cutter at a corner depending on the corner angle, in order to maintain the cutting rate per unit time. 62007 Run hour and parts quantity display. 63034 DATA CENTER Storage Type B (total: 800MB) – Communication card with internal 800MB removable flash RAM card used for storing and executing NC data (of subprograms) for high-speed, high-definition finishing and supporting SGI capabilities. CNC programs can be transferred to and from a CAD/CAM system from the operator's pendant by FTP get and put commands over an Ethernet cable. 66003 Additional 48 Work Offsets (G54.1 P1-P48) – Allows for 48 work coordinate systems, simplifying multiple part fixtures. 68010 600 Macro Common Variables – Variable numbers 100-199 are reset and cleared when the power is turned off, while 500-999 are permanent. Pallet Size: 400 × 400 mm X-Axis Travel: 560 mm Y & Z-Axis Travel: 640 mm Max. Payload Capacity: 400 kg Spindle Speed: 15,000 RPM Spindle Taper: HSK-A63 Rapid Traverse Rate: 60,000 mm/min (1,968 ipm) Cut...

Condition: used, Year of construction: 2016, operating hours: 3,335 h, Equipment: all wheel drive, Wacker Neuson DW60 dumper, manufactured in 2016, with cabin: ----* Manufacturer: Wacker Neuson * Type: DW60 * Year of manufacture: 2016 * Recorded operating hours: approx. 3,335 * Front tipper * Cabin * Payload: 6,000 kg * Operating weight: 4,765 kg * Joystick needs to be replaced (see photos) * Condition: see photos * Additional photos + video available upon request (WhatsApp Erik) * Price: €15,900, net + 19% VAT ---- Ijdpfx Acozit A Isysti For further questions, please call: Erik Kortum: WhatsApp All information is provided without guarantee, subject to errors and prior sale.

Condition: used, Year of construction: 2016, operating hours: 2,750 h, Equipment: all wheel drive, Wacker Neuson DW60 dumper from the year 2016 with only 2,750 operating hours / rotating dump bed! ----* Manufacturer: Wacker Neuson * Type: DW60 * Year of manufacture: 2016 * Operating hours: approx. 2,750 * Payload: approx. 6,000 KG * Operating weight: approx. 4,948 KG * Power: 55 KW * Rotating dump bed Itedpfjzh Ub Nsx Acyoi * More photos + video available upon request (WhatsApp Erik) * Price: 17,900 Euro, net + 19% VAT ----For further questions, please call: Erik Kortum: WhatsApp All information is provided without guarantee and liability. Errors and prior sale are reserved.

Condition: excellent (used), Year of construction: 2016, Seydelmann K126 bowl cutter with tote bin loader. In almost new condition having only been used for 3,800 hours. Can be sold with full safety cage guarding system. Itodpfx Acovthdfjyei

Condition: good (used), Year of construction: 2016, OMET X6 Year of manufacture: 2016 Web width: 430 mm Condition: Very good – well maintained, in production Availability: End of 2026 Location: Europe Technical Configuration – 6 x Flexo printing units (servo-driven, sleeve system) – Printing on self-adhesive materials – 6 x UV curing lamps – Extended varnishing on last printing unit – Turn bar (web turning device) – 2 x Die-cutting units – 1 x GapMaster system – 3 x Sheet-off die-cutting stations with delivery belt – Sheet delivery with evacuation conveyor Equipment – 3 x Sleeve sets – 6 x Anilox rollers – 3 x Magnetic cylinders Application and Advantages The OMET X6 is a high-performance flexographic press combining state-of-the-art servo technology with the flexibility of sleeve systems. It offers: – Fast job changes with minimal downtime – High register accuracy and consistent print quality – Versatility for both roll-to-roll and sheeted label production – Efficient inline finishing capabilities (die-cutting, varnishing, sheeting) – Ideal for medium to long runs and frequent job changes Itodpfx Aoyyn U Ascysi General Condition The machine is in very good condition, professionally maintained, and currently in operation. Inspection and test runs can be arranged at any time by appointment.

Condition: used, Year of construction: 2016, Kinshofer grapple from 2016 with MS08 attachment! ----* Manufacturer: Kinshofer * Type: C08HPX-50 * Year of manufacture: 2016 * Attachment: MS03 * Weight: approx. 258 kg * Good condition * Price: 2,900 euros, net + 19% VAT ----For further questions, please call: Erik Kortum: WhatsApp Itjdszhi D Sjpfx Acyji All information is provided without guarantee and subject to errors and prior sale.

Condition: used, mileage: 370,000 km, power: 353 kW (479.95 HP), first registration: 05/2016, fuel type: diesel, overall weight: 33,000 kg, axle configuration: 3 axles, brakes: retarder, color: grey, gearing type: mechanical, emission class: euro6, Equipment: air conditioning, all wheel drive, * MAN TGS 33.480 6x6 all-wheel drive * Meiller 2-sided tipper (rock tipper) * Bordmatic * Manual transmission * Retarder / PriTarder * Full leaf spring suspension * Mileage: 370,000 km * Vehicle Identification Number (VIN) available * Emission standard: Euro 6 * Year of manufacture: 2016 Itedozhd U Eepfx Acyoi ----* MAN TGS 33.480 6x6 (Euro 6, year of manufacture approx. 2016): * Engine / Power * Engine: MAN D26 (inline 6-cylinder diesel) * Displacement: approx. 12.4 to 12.5 liters (approx. 12,419 to 12,490 cm³)---- * Power * HP (horsepower): 480 hp * kW (kilowatts): 353 to 358 kW * Torque * Max. torque: approx. 2,300 Nm * Other important data * Cylinders: 6 (inline engine) * Transmission: Manual transmission (e.g., ZF 16-speed) * Drive: 6x6 all-wheel drive Emission standard: Euro 6 (for your vehicle)----* Tel.: call (Contact · Phone · Mobile · WhatsApp)

Condition: excellent (used), Year of construction: 2016, Clamping force (kN): 1600 Opening stroke (mm): 460 Mould height (min–max) (mm): 250 – 600 Platen size (mm): 760 × 760 Tie bar distance (mm): 520 × 520 Ejector stroke / force (mm / kN): 150 / 40 Dry cycle time (sec): 1.4 – 320 Screw diameter (mm): 30 Screw stroke (mm): 160 Shot volume (cm³): 113 Screw speed (rpm): 420 L/D ratio (3 zones): 23.6 / 20.0 Plasticizing capacity (g/sec): 15 / 22 L/D ratio (barrel): -29 Plasticizing capacity (barrel) (g/sec): -29 Injection flow (cm³/sec): 157 / 214 Injection pressure (bar): 2400 / 2000 Itjdpfx Aoyyz Ddecysi Nozzle stroke / force (mm / kN): 225 / 28 Drive / Power Pump motor power (kW): 16.91 Working hours 13.227 h Type: Multicomponent Drive: Electric Possible to buy with Viper robot

Condition: used, Year of construction: 2016, total height: 2,200 mm, total length: 2,400 mm, total width: 1,200 mm, Colour: Black Empty weight: 585 kg - Year: 2016 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 3000321250F - Drive system: Conventional - Control system brand: Mitsubishi - Saw type: Semi-automatic - Horizontal/vertical: Horizontal - Mitre cutting available: Yes - └ Round cutting capacity at 45° [mm]: 270 - Round cutting capacity [mm]: 170 - Power [kW]: 2.6 - Saw blade length [mm]: 3660 - Saw blade width [mm]: 27 - Saw blade thickness [mm]: 0.9 - Workpiece clamping: Manual - Options: Chip collection tray - Transport dimensions: 2400mm x 1200mm x 2200mm (l x w x h) - Transport weight [kg]: 585kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Itedpfxszdizcj Acyei Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2016, condition: used, This listing is for the 2016 Thermo Scientific MSC 1.2 Safety Cabinet Class 2. Itedpfx Aozgv Nrscyei The unit is in full working condition and ready for immediate use. Designed for reliable microbiological safety, the Thermo Scientific MSC 1.2 delivers essential personnel, product, and environmental protection. Ideal for clinical and research labs, it offers high-efficiency HEPA filtration and a sloped front window for comfortable and secure handling of biological agents. Transparency Report and Technical Audit: Power-On Test: Verified; Control panel active, interior lighting operational, and airflow/fan system engaged.

Condition: used, Year of construction: 2016, operating hours: 3,625 h, total length: 13,600 mm, total width: 2,450 mm, total height: 2,450 mm, Colour: Grey Weight: 7.200 kg Price: On request - Year: 2016 - Documentation available: No - CE certificate present: No Iedpfxox R A Ufo Acysti - Operating hours: 3625 - Max. cutting length [mm]: 1600 - Max. cutting width [mm]: 4300 - Transport dimensions: 13600mm x 2450mm x 2450mm (l x w x h) - Transport weight [kg]: 7200kg - Transport packages [pcs.]: 8 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, operating hours: 6,766 h, load capacity: 3,000 kg, lifting height: 4,900 mm, free lift: 1,700 mm, load center: 600 mm, fuel type: gas, mast type: triplex, construction height: 2,250 mm, motor manufacturer: Toyota 4Y, fork length: 1,065 mm, tire condition: 100 %, overall weight: 6,500 kg, empty load weight: 3,000 kg, total height: 2,250 mm, total length: 1,550 mm, total width: 1,500 mm, Equipment: adjustable boom, front guard, head guard, pallet forks, sideshift, Very good condition Fork positioner + sideshift Toyota engine We sell forklifts after a full service. Iodszf Iwxepfx Acyeti Prepared for the end user. Ready to use. We can arrange transport within Europe and worldwide.

Condition: good (used), Year of construction: 2016, fuel type: electric, NIFTYLIFT Nifty 120 TE Trailer-Mounted Boom Lift / Mobile Elevated Work Platform, 2016, Dutch registration Inspection valid until 8-2026 A video can be sent via WhatsApp. We have a continuous stock; see our website. Prices are quoted ex Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are at trade prices and in AS-IS condition without any warranties (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call beforehand, as we are not always on site. Ijdpfx Acezf Hx Ueyoti Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: used, Year of construction: 2016, total width: 900 mm, total length: 1,200 mm, total height: 1,600 mm, Colour: Grey Weight: 300 kg - Year: 2016 - Documentation available: No - CE certificate present: No - Serial number: 7/26 - Max. cutting height [mm]: 110 - Max. cutting width at 90° [mm]: 290 - Voltage [V]: 400 - Current consumption [A]: 6.5 - Fuse [A]: 16 - Transport dimensions: 1200mm x 900mm x 1600mm (l x w x h) - Transport weight [kg]: 300kg Itjdpfx Acoym Um Dsysi - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels