Used Ostas Smr-S 1070 X 150 for sale (101,493)

Condition: new, Ostas 4-roll plate bending machine 4R OHS 3070 x 320 Hydraulic side roll adjustment 3 digital displays Hydraulic drop-end bearing Hardened rolls Conical bending device Separate control panel Roll length: 3070 mm Top roll diameter: 320 mm Pgsdexrdxfepfx Ak Hor Side roll diameter: 240 mm Total motor power: 20 kW Weight: 13,050 kg Dimensions (mm): 5900 x 1850 x 2050 (L x W x H) Bending Performance Data 16 mm at minimum inside diameter (5 x top roll) 12 mm at minimum inside diameter (1.5 x top roll) Pre-bending Performance Data 12 mm at minimum inside diameter (5 x top roll) 10 mm at minimum inside diameter (1.5 x top roll) All bending capacities are calculated based on a yield strength of 250 N/mm2 Material (ST 37 – ST 42 structural steel) The pictures shown are for reference only.

Year of construction: 1953, condition: ready for operation (used), Offered for sale is a WaldrichSiegen CNC portal milling machine for horizontal and vertical milling as well as drilling of large workpieces. Table travel: 14000mm, crossrail saddle travel: 4500mm, crossrail travel: 4000mm, quill travel: 450mm, positioning accuracy of table/crossrail saddle/crossrail/quill: 0.05mm, distance between columns: 4545mm, distance from table to spindle: 4000mm, table size/clamping surface X/Y: 14000mm/4350mm, main spindle motor power: 125kW, main spindle tool interface: ISO SK60, max. table load: 200t, max. point load: 10000kg, control: Siemens 840D, measuring systems: Heidenhain, axis drives: Siemens/Dornhoff. Including an angle-adjustable universal milling head, angle milling heads with installation heights of 800mm/850mm/1400mm, a 1400mm work spindle extension, adapter plates for the work spindle with 400mm/220mm and chip conveyors on the left/right below floor level. The saddle guideways require adjustment. The machine was built in 1953, conversion of the original planer into a portal milling machine by WaldrichSiegen with a completely new milling saddle: 1974, CNC upgrade with a new electrical system: 2001, conversion of the table drive to NC: 2015, conversion of the crossrail drive to a gantry configuration: 2024. Machine dimensions X/Y/Z: approx. 40000mm/10000mm/9000mm, weight: approx. 350t. Documentation available. Inspection possible by arrangement. Pjdpfszrzphsx Ak Hegr

Condition: good (used), Year of construction: 2013, turning diameter over bed 520 mm turning diameter over slide rest 330 mm turning length 1500 mm Pgsdozl Hb Nopfx Ak Hsr spindle bore 80 mm spindle turning speed - stepless 20-2000 U/min spindle drive 7,5 kW weight of the machine ca. 2,2 t

Condition: new, Year of construction: 2026, number of rollers: 3, roller (bottom) diameter: 95 mm, roller (top) diameter: 95 mm, side roll diameter: 95 mm, roller length: 1,270 mm, number of digital displays: 1, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, swiveling upper roller, – Capacity 1270 x 3 mm – Electrically adjustable rear roller – Digital display Pgsdpfx Ajxiyw Esk Hsr – Hardened rollers – Conical bending – Swiveling upper roller – Brake motor – Foot pedal control – Emergency stop – Documentation – 400 V

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, Gantry Portal Milling Machine / Manufacturer: WALDRICH SIEGEN Type: PF-S-150 - 1953: Original year of manufacture (originally a workbench) - 1974: Reconstruction by the manufacturer WALDRICH SIEGEN to a portal milling machine (completely new milling support) - 2001: Modernised to CNC, with new electrical control cabinet - 2015: Modernization / Reconstruction to NC table drive - 2024: Reconstruction to crossbeam drive (gantry) Machining options: - Milling/Boring: horizontal/vertical Podpfsyz Ru Uox Ak Hogr The machine can be inspected by appointment under power. Condition: Ready for operation. TECHNICAL DATA / DESCRIPTION: Travel distances of feed axes (CNC): - Table: 14.000 mm - Crossbeam support: 4.500 mm - Crossbeam: 4.000 mm - Stand passage: width 4.545 mm - Clear width: 4.200 mm - Height from table to spindle: 4.000 mm - Quill: 450 mm - Table size / clamping: 14.000 x 4.350 mm - Table load: max. 200 tons (10 tons point load) - Drive power of main spindle motor: 125 kW - Total machine weight: approx. 350 tons - Space requirement for entire machine: Length 40 / Width 10 / Height above floor 9 m EQUIPMENT / ACCESSORIES: - CNC control: SINUMERIK 840D - Documentation - Additional comprehensive equipment ... No guarantee is given for the completeness and accuracy of the technical information and equipment. - Subject to prior sale - Detailed technical data sheet and information on equipment available on request.

Condition: as good as new (ex-display), Year of construction: 2025, pressure 150 t stroke 300 mm table surface area 1070 x 290 mm column travel between the guideways 1070 mm ajustment speed 9.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec engine output 11.0 kW weight of the machine ca. 1870 kg. range L-W-H 2200 x 1300 x 2300 mm Exhibition machine from 2025 with only approximately 2 operating hours Condition as new Special price upon request Features: - Robust electro-hydraulic workshop press with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in . and out bolts, bearings, bushings, and much more. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod * Includes round steel chain and 2 locking pins * Piston rod with metric mount - 1 set of V-block prism supports - Pressure gauge for pressure display - Simple manual control with: * 1 feed speed * 1 working speed * 1 retraction speed - Piston can be stopped in any position - Hydraulic tank permanently mounted on the side Pjdpfxjxaabfs Ak Hegr - Operating instructions

Condition: new, Ostas 4-Roller Plate Bending Machine 4R OHS 3070 x 250 Hydraulic side roll adjustment 3 digital displays Hydraulic drop-end bearing Hardened rolls Cone bending device Separate control panel Roll length: 3070 mm Top roll diameter: 250 mm Side roll diameter: 200 mm Total motor power: 7.5 + 1.5 kW Weight: 9800 kg Dimensions (mm): 5050 x 1550 x 1470 (L x W x H) Bending performance data 9 mm at minimum inner diameter (5 x top roll) 7 mm at minimum inner diameter (1.5 x top roll) Pre-bending performance data Pgedsyaqmajpfx Ak Hor 7 mm at minimum inner diameter (5 x top roll) 5 mm at minimum inner diameter (1.5 x top roll) All bending capacities are based on a yield strength of 250 N/mm2 Material: (ST 37 – ST 42 structural steel)

Condition: used, Pair of steel angle plates Slots width: 22 mm Oblongs dimensions: 120 x 16 mm Pjdpjzwxgnsfx Ak Hjgr Width: 150 mm Depth: 445 mm Total height: 600 mm

Condition: excellent (used), Viessmann Vitoplex heating boiler 150 kW (0069) oil burner Pgodex Htiropfx Ak Hor

Condition: used, all stainless steel nett width 600 mm Pgsdjzvbyzspfx Ak Hsr 2 motors “JVM GmbH & Co.KG”, Type JV 156-250 power: 2 x 0,95 kW Grill opening: dia. 14-22 mm dimensions : ± 2.700 x 1.400 x 1.000 mm

Condition: excellent (used), Year of construction: 2001, Laser marking system Fab. Baublys Typ. BL 150 S/NC 500 Year 2001 Technical data Manufacturer: Baublys Type: BL 150 S/NC 500 Year of manufacture: 2001 Laser: 150 Watt Laser type Q-switch pulsed solid-state laser Laser medium Nd:YAG Wavelength 1064 nm Beam diameter approx. 1.2 - 1.3 mm after decoupling mirror at TEM00 Beam divergence 5 mrad TEM00 Pulse duration (time) CW / 90 ns Max. Output power 65 W multimode 16 W single mode Pulse energy 16 mJ at 3 kHz Beam deflection system Galvanometer system Line thickness with mixed mode approx. 0.12 mm Deflection speed 3 m/s; this corresponds to 200 characters/s at a height of 1.5 mm and a single-line font Dimension: approx. Weight: approx. Power supply Voltage 400 V, three-phase current 50 Hz, 3 phases, clockwise rotating field Connection 5-pin CEE plug 16 A 6h Max. Power consumption 8.5 kW, max. 16 A per phase Fuse protection 3 x 16 A slow-blow Water connection Cooling water flow rate 7.5 l/min at 20°C flow temperature Connection thread to be discharged G 3/4" external thread Heat quantity approx. 6.5 kW Max. Cooling water temperature at inlet 20°C Water consumption dependent on inlet temperature Outlet temperature < = 35°C Pedpfx Asq Abnnsk Hsgr Ambient conditions for transportation and storage Temperature +5°C to +40°C Humidity < 70% Installation site Observe transport instructions Ambient conditions for operation Temperature +10°C to +40°C Humidity < 70% Installation location Observe transport instructions All information without guarantee. A demonstration is possible at any time in our exhibition hall.

Condition: good (used), BYSTRONIC HYDRAULIC BENDING MACHINE 3100X150 TON, MAX STROKE 315 mm, RAPID STROKE DOWN 190 mm/s, WORKING CYCLE 10 mm/s, RAPID STROKE UP 150 mm/s, DIMENSIONS: 415X200X290cm (h) WEIGHT 11,000 KG Y1 Y2: hydraulic cylinder axes. X forward and backward axis of the register. R upward and downward axis of the register. Z1 and Z2 axes of the movement to the right and left of the stops. X1 or relative X which is the axis of the movement forward and backward of a single stop. 7 axes. Podpfx Aksvxipgo Hogr The control also manages the hydraulic crowning, which can be considered the eighth axis.

Condition: new, Year of construction: 2025, Top height 250 mm Spindle bore 82 mm Distance between Center 1500 mm Circumference diameter over bed 500 mm Circumference diameter in the crank 710 mm Circumference diameter over support 300 mm Speed range 9 - 1600 rpm (24 steps) Spindle nose DIN 55029 Camlock D1-8 Range of longitudinal feeds 0,028 - 6,43 mm / rev; 93 steps Range of feed rates 0,012 - 2,73 mm / rev. 93 steps Metric threads 0.5 - 224 mm; 48 steps Inch thread 72 - 1/8 gear / inch; 49 steps Module thread 0.5 - 112 mm; 42 steps Diametrical thread 56 - 1/4 DP; 42 steps Quill ø 75 mm Podpfxjd I Az So Ak Hsgr Quill Travel 150 mm Quill sleeve Morse cone 5 Motor power 7.5 kW Weight 2,950.00 kg Dimensions 3132 x 975 x 1270 mm

Condition: good (used), Equipment: type plate available, Ystral Type X 11,000 S/LDT-4-154P Pgjdpfx Akjzp Nvwe Hjr Disperser based on the rotor-stator principle on a stand, without control unit The YSTRAL disperser is designed for the production of emulsions and suspensions in the medium-viscosity range. It meets high requirements for fine dispersion, even in the medium-viscosity range, and is used for batches up to 2,000 liters. Drive: 2,910 RPM / 11.0 kW

Year of construction: 2017, condition: used, Leafy vegetable and herb slicer, 2 units available. When purchasing the complete set (2 units), the price is 12,000 euros net, non-negotiable. Pgjdoyktdvspfx Ak Hsr

Condition: new, Year of construction: 2026, number of rollers: 3, roller (bottom) diameter: 95 mm, roller (top) diameter: 95 mm, side roll diameter: 95 mm, roller length: 1,270 mm, sheet thickness steel (max.): 3 mm, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, swiveling upper roller, - Capacity 1270 x 3 mm Pjdpfx Akoxn Rrqo Hsgr - Conical rolling - Swing-out top roll - Foot pedal operation - Brake motor - Emergency stop - Documentation - 400V

Condition: new, Year of construction: 2026, roller (bottom) diameter: 220 mm, roller (top) diameter: 220 mm, side roll diameter: 180 mm, roller diameter: 220 mm, roller length: 2,070 mm, sheet thickness steel (max.): 10 mm, empty load weight: 4,500 kg, - 4 rolls - Capacity: 2070 x 10 mm - Bending capacity: 2070 x 8 mm - Hardened rolls - Top roll diameter: 220 mm - Bottom roll diameter: 220 mm - Side roll diameter: 180 mm - Hydraulic - Digital display for left roll movement - Digital display for central lower roll movement - Digital display for right roll movement Podpfxjr H Df Is Ak Hjgr - Hydraulic up and down movement system with intermediate and central roll - Hydraulic indicator for easy roll positioning - Hydraulic up and down movement system with intermediate and central roll - Top roll hydraulically swing-out - Steel construction ST-52 - Hydraulic drop-end for easy roll positioning - Hydraulic up and down movement system with central and side rolls - Hydraulic balancing system - Overvoltage protection - Documentation - 400V

Condition: new, Industrial belt sander Scantool 150 x 2000 with integrated double dust extraction system Sanding belt: 150 x 2000 mm Working width: 150 mm Motor: 4.8 hp Speed: 34 m/s Table height: 475 to 1240 mm Sanding belt dimensions: 150 x 2000 mm Platen size: 530 mm Weight: 115 kg Psdpfx Ajflt Aljk Hjgr The Scantool industrial belt sander models with double dust extraction system, 75 x 2000 and 150 x 2000, are powerful, high-quality machines built according to the strictest environmental and safety regulations. The belt sanders are standardly equipped with a motor brake, adjustable working height, eye protection, angle stop, and motor protection switch with zero-voltage release. This low-noise machine with CE marking is ideally suited for sanding all metals. Motor protection switch with zero-voltage release Separate emergency stop Motor brake Adjustable angle stop Eye protection The infinitely adjustable working height enables an ergonomically correct working position. Perfect design for fast, effective, and safe sanding. Self-adjusting belt tension. Danish top quality.

Condition: new, number of rollers: 3, roller (bottom) diameter: 95 mm, roller (top) diameter: 95 mm, side roll diameter: 95 mm, roller length: 2,070 mm, number of digital displays: 1, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, swiveling upper roller, - Capacity 2070 x 1.5 mm - Electrically adjustable rear roller Pjdpsvkkkisfx Ak Hjgr - Digital display - Hardened rollers - Conical roller - Swiveling top roller - Brake motor - Foot control - Emergency stop - Documentation - 400V

Condition: like new (used), functionality: fully functional, machine/vehicle number: 122899, only for sale as a set: Espresso machine SCHÄRF VIENNA 2G, No. 122899 Pedsy Atzmopfx Ak Hegr white, two-group with electronic grinder SCHÄRF Mazzer STARK S/X-mill-Protect-S grinder LUIGI Super Jolly V pro e Unfortunately, the year of manufacture is not listed on the invoice. The espresso machine and grinder were purchased in December 2022. The equipment can be inspected on site by prior appointment.

Condition: excellent (used), functionality: fully functional, turning diameter over cross slide: 580 mm, spindle bore: 104 mm, turning diameter: 870 mm, turning diameter over bed slide: 1,150 mm, Geminis GE 870 S lathe, with a 4000mm center distance, featuring a complete cast iron bed, dimension display, 870mm swing over the bed, automatic feed on the carriage, rapid traverse on the slides, a quick-change tool turret, 580mm swing over the cross slide, 1100mm swing over the tailstock, 340mm tailstock length, and speeds ranging from 16-1250 rpm. The spindle bore diameter is 104mm. It is equipped with a 3-jaw chuck with a 400mm diameter and a quick-centering mechanism, as well as a 4-jaw independent chuck with an 800mm diameter. It also includes 2 fixed steady rests and an additional universal 3-jaw chuck with a 315mm diameter. The main motor has a power rating of 18.5 kW. Overall, the lathe is in very good condition. Pgsdpfxjzmp Hks Ak Hor

Condition: new, Year of construction: 2025, Top height 250 mm Spindle bore 82 mm Distance between Center 1500 mm Circumference diameter over bed 500 mm Circumference diameter in the crank 710 mm Circumference diameter over support 300 mm Speed range 9 - 1600 rpm (24 steps) Spindle nose DIN 55029 Camlock D1-8 Range of longitudinal feeds 0,028 - 6,43 mm / rev; 93 steps Range of feed rates 0,012 - 2,73 mm / rev. 93 steps Metric threads 0.5 - 224 mm; 48 steps Inch thread 72 - 1/8 gear / inch; 49 steps Module thread 0.5 - 112 mm; 42 steps Diametrical thread 56 - 1/4 DP; 42 steps Quill ø 75 mm Pinolenweg 150 mm Quill holder Morse cone 5 Motor power 7.5 kW Weight 2,950.00 kg Pedpfsd I A Ahex Ak Hegr Dimensions 3132 x 975 x 1270 mm

Condition: new, Bernardo belt grinder MS 150 x 2000 DC-2 / 400 V Technical specifications belt dimensions 150 x 2000 mm Belt speed 18 / 36 m/sec. contact wheel Ø x B 200 / 150 mm surface grinding table 500 x 150 mm suction connection Ø 2x 100 mm Suction capacity 520 m3/h speed suction 2780 rpm Motor power extraction 0,37 kW Motor output power S1 100% 2,5 / 3,3 kW Motor input power S6 40% 3,3 / 4,3 kW Voltage 400 V length 1130 mm Width 600 mm Height 1130 mm Pgsdpspag Ttsfx Ak Hor Weight approx. 116 kg Scope of delivery - Sanding belt K 80 - Hinged protective disk - Integrated suction - 2x aluminum suction hose diam. 100 mm - filter bag - Grinding and support table - Workpiece stop - Motor protection switch - Rubberized grinding roller - Graphite coating - Separate emergency stop button - Base frame

Year of construction: 2021, condition: new, - 4 rollers - Capacity 1570 x 9 Pjdpjgg N R Hofx Ak Hjgr - Hardened rollers - Diameter above roller 200 mm - Diameter below roller 200 mm - Diameter of side roller 180 mm - Hydraulic system - Digital display for movement of the left roller - Digital display for movement of the middle lower roller - Digital display for movement of the right roller - Can be folded hydraulically above the roller - Steel construction ST-52 - Hydraulic drop-end for easy roller positioning - Hydraulic up-and-down movement system with middle and side rollers - Hydraulic crowning system - Overload protection - Documentation - 400V

Year of construction: 2018, operating hours: 100 h, condition: used, functionality: fully functional, Force Maincylinder: KN 1.000 Capacity: car/hour 30 Pgjdpfx Aelhqbrek Hsr Measurement: 2,2x8 mxm Machine weight 18 to Place: Austria Available immediately