Used Orsi Soil Tiller for sale (509)

Year of construction: 2005, condition: good (used), machine/vehicle number: 815 1015 1794, Manufacturer: CFS Germany GmbH Type: JuniorPak M420 Year of manufacture: 2005 Voltage: 400 V Phases: 3-phase + N + PE Current: 29 A Power: 20 kW Frequency: 50 Hz Weight: 2200 kg This is a thermoforming machine (deep-draw machine) for the production of vacuum-packed or MAP-packed food. It is designed for medium-sized production lines and is often used for meat, cold cuts, cheese, fish, and ready meals. How the JuniorPak M420 works 1. Bottom film feeding A roll of plastic film is mounted at the rear of the machine. The film is drawn forward using conveyor chains with grippers. Common materials: APET/PE PA/PE PP PET barrier film 2. Heating The bottom film enters the heating zone. Here, the plastic is heated to approximately: 90–140 °C, depending on the material type. The temperature is controlled by electric heating plates. Nljdpfozka Rusx Amyod 3. Deep drawing This is the machine's most important process. The mold closes. Then, usually: vacuum is applied under the film compressed air is applied above the film, if required the film is drawn down into the mold The result is finished plastic containers or trays. The forming depth is determined by the mold. 4. Filling zone After forming, the process stops. Operators or automatic equipment place the product in the trays. Examples: meat burgers bacon cheese fish 5. Top film A new film is fed in from above. This lies over the product. 6. Vacuum/MAP The sealing chamber closes. The machine can: create a vacuum flush with gas seal directly In MAP, the following are often used: CO₂ N₂ O₂ The gas mixture depends on the product. 7. Sealing The top film is sealed to the bottom film. Sealing occurs with: temperature pressure time These three parameters are crucial for a tight seal. 8. Cutting The cutting tool cuts each individual package. Excess film is transported out as scrap. 9. Ejection Finished packages are transported out onto a conveyor belt. They can then: be labeled be weighed be checked with a metal detector be packed in boxes A JuniorPak M420 normally consists of: Frame made of stainless steel Film transport with chains Heating station Forming station Filling zone Vacuum/MAP chamber Sealing tool Cutting tool Ejection conveyor Vacuum pump Pneumatic system Hydraulics (on some models) PLC control with HMI Typical technical data For the M420 series, typical values are: Maximum film width: approx. 420 mm Forming depth: up to approx. 100–120 mm, depending on the tool Cycle time: 5–15 cycles/min Capacity: from a few hundred to several thousand packages/hour, depending on the product and tool Connection: 400 V 3-phase Power: 20 kW (as shown on the nameplate)

Condition: used, Solid Air Air Compressor Type: SOLID 600-10 Year of manufacture: 2003 Displacement flow rate: 605 l/min Discharge pressure: 10 bar Operating speed: 925 Nodpfx Aewgkn Esmyeld Motor power: 4.0 kW

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 21610229, Spring coiling machine WAFIOS ASF3; for torsion and leg springs. Wire diameter: 1.0–3.5 mm. Max. spring diameter: 50 mm. Leg length: 115x130 mm. Fully functional, including accessories (see pictures) and pay-off reel. Nlsdsyg Nitjpfx Amyjd

Year of construction: 1990, condition: like new (used), Well known 'EN' brand (Taïwan) 2-axis CNC spring generator. Low investment for CNC production of easy torsion springs up to 2,0 mm. Nlodpfx Aeiz Ddkemyed

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, pressure: 0.5 bar, We are offering this refurbished Carl water bath still - column distillery, year of manufacture 2006. Com No.: 12 276 / REV 13 976 Year of manufacture: 2006 / Refurbished 2024 Filling volume: 110 l Max. operating overpressure: 0.5 bar Heating: electric heating elements Power: 30 kW Njdpsyux E Tsfx Amysld Water bath jacket capacity: 180 l If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 2014, machine/vehicle number: 412, space requirement width: 1,500 mm, space requirement length: 3,300 mm, space requirement height: 2,500 mm, Ultrafiltration system with accessories for the treatment of soil washing wastewater Year of construction 2014, fully functional until dismantling Documentation, operating instructions, E-plans are available. 7 packages; Nledpfx Ajqzx Dbsmysd Filtration tank single 1520mm diameter Filtration system with control 330cm x 150cm x 220cm 5 extra Euro pallets with accessories

Condition: new, functionality: fully functional, Cone splitter Excavator splitter Drill cone splitter Wood splitter KS4 Drill cone 200x400 - Made in Germany The powerful cone splitter for attachment to mini-excavators, excavators, wheel loaders, tractors, skidders and many other options. The drill cone can be exchanged for various tools such as a root cutter, auger, hummus sieve, concrete mixing drum, weed broom and many other attachments. The cone splitter consists of a very sturdy drive unit and the drill cone (splitting cone) The drill cone is completely hardened. It is not made of unhardened steel as is the case with many other manufacturers. It can be converted to other tools in just a few simple steps. - Cone splitter - Root cutter - Earth auger - Weed brush - Sweeping broom - Rotary harrows NO CHINA GOODS ! WE PRODUCE IN GERMANY ! THE ideal multi-purpose tool for foresters, farmers, gardeners, do-it-yourselfers and professionals Overall length 600 mm plus attachment and interchangeable system Universally applicable in construction, forestry, agriculture and horticulture For splitting heavy firewood or wood for wood chips For drilling holes in the ground, for stakes, plants and much more For removing rootstocks and tree stumps For cleaning trenches and paved areas For levelling garden areas and creating a fine soil structure You simply do the work from the excavator without any further assistance. A very solid and stable steel construction enables you to work hard and for a long time. In addition to the motor, the shaft is supported by 2 sturdy tapered roller bearings to protect against tension and pressure. The tapered roller bearings can be lubricated for a long service life. A powerful HMT 400 hydraulic motor with up to 1,600 Nm gives you the necessary torque for efficient work, from 25 l/min up to 125 l/min and 210 bar pressure Weight 70 kg included: - Drive unit with powerful HMT hydraulic motor, weight 70 kg - Drill cone with tip Ø 200 mm 270 mm/400 mm long, 6xM16 thread LK173 on the front side Nlodjupiapspfx Amyed Total length 270 mm + drill cone tip 130 mm = 400 mm Diameter 200 mm Weight 30 kg Total weight 100 kg

Condition: new, functionality: fully functional, Year of construction: 2024, overall weight: 100 kg, total height: 1,000 mm, color: red, continuous operating pressure: 210 bar, spindle torque (max.): 1,800 Nm, Equipment: hydraulics, Cone splitter Excavator splitter Drill cone splitter Wood splitter KS5 Drill cone 200x400 - Made in Germany The powerful cone splitter for attachment to mini-excavators, excavators, wheel loaders, tractors, skidders and many other options. The drill cone can be exchanged for various tools such as a root cutter, auger, hummus sieve, concrete mixing drum, weed broom and many other attachments. The cone splitter consists of a very stable drive unit and the drill cone (splitting cone) The drill cone is completely hardened. It is not made of unhardened steel as is the case with many other manufacturers. Nedpfx Ameuph Uxeyold It can be converted to other tools in a few simple steps. - Cone splitter - Root cutter - Earth auger - Weed brush - Sweeping broom - Rotary harrows NO CHINA GOODS ! WE PRODUCE IN GERMANY ! THE ideal multi-purpose tool for foresters, farmers, gardeners, do-it-yourselfers and professionals Overall length 600 mm plus attachment and interchangeable system Universally applicable in construction, forestry, agriculture and horticulture For splitting heavy firewood or wood for wood chips For drilling holes in the ground, for stakes, plants and much more For removing rootstocks and tree stumps For cleaning trenches and paved areas For levelling garden areas and creating a fine soil structure You simply do the work from the excavator without any further assistance. A very solid and stable steel construction enables you to work hard and for a long time. In addition to the motor, the shaft is supported by 2 sturdy tapered roller bearings to protect against tension and pressure. The tapered roller bearings can be lubricated for a long service life. A powerful HMT 500 hydraulic motor with up to 1,800 Nm gives you the necessary torque for efficient work, from 25 l/min up to 125 l/min and 210 bar pressure Weight 70 kg included: - Drive unit with powerful HMT hydraulic motor, weight 70 kg - Drill cone with tip Ø 200 mm 270 mm/400 mm long, 6xM16 thread LK173 on the front side Total length 270 mm + drill cone tip 130 mm = 400 mm Diameter 200 mm Weight 30 kg Total weight 100 kg

Year of construction: 2020, condition: new, Professional earth auger, Ø 400 x 1000 mm, with Hardox cutting edge. Njdpfx Aodf R Rqemysld Robust earth auger for our carrier unit, or upon request, also for other mounting systems. Item No.: MT18-EB-400-1000

Year of construction: 2020, condition: new, The root cutter is equipped with 9 hardened, reversible cutting inserts that can be rotated multiple times when they become dull. The inserts have a long service life. There are inserts with 3 different cutting edge angles to optimally process different types of wood. You can also use the cutter to mill out flower boxes or perform other milling operations. Nlodpfxodf Sd Se Amyed Article number: MT18-WF300

Condition: used, functionality: fully functional, Year of construction: 2022, load capacity: 1,400 kg, lifting height: 4,150 mm, free lift: 1,418 mm, mast type: triplex, construction height: 1,950 mm, fork carriage width: 570 mm, fork length: 1,150 mm, construction width: 770 mm, High-lift stacker Load center: 600 Mast type: Triplex Technical condition: New Front tire type: Polyurethane Nedjwqtyxepfx Amysld Rear tire type: Polyurethane Battery year: 2025 Battery condition: NEW CE certificate - BT Powerdrive - Liftable support arms (Initial lift) - Electronic fingertip control buttons - Electronic regenerative braking - Electronic speed control - Operator safety features - Storage compartments - Automatic shut-off - Creep speed function with vertical tiller ‘Click-2-Creep’ - Programmable performance parameters - Easy maintenance access Your individual equipment configuration: - Tiller: pedestrian-operated - Plexiglass finger guard - Central battery compartment with plastic battery cover

Condition: used, functionality: fully functional, Year of construction: 2025, load capacity: 3,000 kg, construction height: 1,288 mm, fork carriage width: 730 mm, fork length: 1,150 mm, empty load weight: 720 kg, construction width: 734 mm, Low-lift pallet truck Load centre: 600 mm Technical condition: New Front tyre type: Polyurethane Rear tyre type: Polyurethane Battery voltage: 24V Battery condition: New CE certificate Lift height: 120 mm Tiller height max / min: 1288 / 1075 mm Nsdpfevz I Slex Amyeld Ground clearance at wheelbase centre: 0 mm

Condition: used, functionality: fully functional, Year of construction: 2025, operating hours: 1 h, load capacity: 3,000 kg, construction height: 1,288 mm, fork carriage width: 730 mm, fork length: 1,150 mm, empty load weight: 720 kg, construction width: 734 mm, Low lift pallet truck Load centre: 600 Technical condition: New Front tyre type: Polyurethane Rear tyre type: Polyurethane Battery voltage: 24V Battery condition: NEW CE certificate, Njdpfx Amewqtxnoyold Lift height: 120 mm Tiller height max/min: 1288 / 1075 mm Ground clearance at wheelbase centre: 0 mm

Condition: new, Year of construction: 2026, functionality: fully functional, This cabin pressure washer made of high-quality stainless steel is a tool that raises cleaning standards to a new level. Designed with professional applications in mind, this washer offers reliability, durability and performance. Made from high-grade stainless steel, it provides durability and resistance to environmental conditions, ensuring long-lasting performance even in the most demanding working conditions. Unit description: With a robust stainless steel construction, our cabin washer is corrosion resistant and provides long-lasting performance even in harsh environments. Equipped with advanced pressure technology, it provides effective removal of dirt, oil, grease and other contaminants from a variety of surfaces. Our cabin pressure washer is an essential tool for businesses that value cleanliness, efficiency and reliability. It will make cleaning tasks easier, faster and more efficient, resulting in customer satisfaction and improved productivity. Cleaning takes place in a closed circuit, using a washing liquid heated to as much as 70 degrees Celsius. The product is discharged from the gun nozzle at a pressure of up to 8 bar, thus thoroughly cleaning hard-to-reach areas and heavily soiled parts of scale, grease or oil. Both the temperature and the fluid increase cleaning efficiency. It has adjustable, level feet. The washer is equipped with a dual-function gun from which either air alone or air with detergent can be discharged. This allows the washed object to be dried with compressed air. Using a cabin pressure washer made of stainless steel has many advantages, including: 1. thanks to the high water pressure combined with detergents, the washer removes even the most stubborn dirt such as oil, grease and rust, ensuring clean and shiny surfaces. 2. the cabin washer enables larger surfaces to be cleaned quickly and effectively in less time than traditional manual cleaning methods. 3. with different pressure setting options, the washer can be adapted to different types of surfaces and types of dirt, making it a versatile cleaning tool. 4. made from high quality stainless steel, the washer is corrosion and damage resistant, ensuring a long service life and minimising the need for maintenance. 5. the cabin washer is easy to operate, allowing operators to quickly learn how to use it and achieve professional results without lengthy training. 6. with its fast and effective cleaning, the cabin washer contributes to increased productivity, which can lead to time and cost savings for the company. Nlsdpfxsuc Tpyo Amyjd Using a cabin pressure washer is not only an investment in cleanliness, but also in efficiency and durability, which translates into benefits for both companies and individual users. Parameters of the MP180 pressure washer: Washer capacity 180 litres Frequency 50 Hz Weight 56 kg Voltage 230 V Height with legs 1450 mm Height without legs 920 mm Internal width 740 mm Internal height (to open lid) 410 mm Internal depth 500 mm Loading height 360 mm Loading width 700 mm

Condition: new, Year of construction: 2026, functionality: fully functional, WORKSHOP PRESSURE WASHER MP150 Features: Washing takes place in a closed circuit, using a washing liquid. The preparation comes out of the nozzle of the gun at a pressure of up to 8 Bar, thanks to which it thoroughly cleans hard-to-reach places and heavily soiled parts with carbon deposits, greases or oils. The washer is very well suited for the regeneration of turbochargers and for cleaning heavily soiled parts made of steel, cast iron, aluminum and other alloys. The cover of the washer has been equipped with pneumatic cylinders that increase the safety and quality of work with the washer. The cabin is equipped with lighting of the working area as standard. The washer has a two-function gun, from which air alone or air with a washing agent can come out. The washed item can be dried with compressed air. *We kindly inform you that the washer is for self-assembly. Technical data Capacity: 160L Liquid tub capacity: 8-14 L Working pressure: 5-8bar Weight: 29 kg Air regulation Pneumatic gun Illuminated cabin Ventilation working Nledpfxsvugwms Amyod Dimensions: 770x610x700mm

Condition: excellent (used), Year of construction: 2012, Like-new rotary tiller with only 280 operating hours. Rotor width: 630 mm. Double row of blades on the rotor: 30 pieces. Engine: 18.5 kW. Equipped with a hydraulic slide. Nlodpfx Asznuimjmyed

Condition: ready for operation (used), Year of construction: 1987, A Hoes drainage trencher for laying drainage pipes and trenches for subsurface drainage is available. Engine: Deutz F 8 L 413 F, Power: 157kW, Torque (1500rpm): 760Nm, Fuel tank capacity: 435l, Oil tank capacity: 125l, Max. working/travel speed: 2400m/min/4750m/min, Track length: 4900mm, Track gauge: 2120mm, Track shoe width: 550mm, Specific ground pressure: approx. 0.26kp/cm², Max. trenching chain speed: 5.69m/s, Chain tensile strength: 640kN, Chain pitch: 100mm, Max. trench width: 290mm, Max. trench depth: 1850mm. Machine dimensions X/Y/Z: approx. 9650mm/2700mm/3400mm, Weight: approx. 13500kg, Operating hours: approx. 8470h. The machine is equipped with a laser guidance system. Includes many spare parts. Documentation available. An on-site inspection is possible. Njdpfxjznmzbs Amyeld

Condition: used, Year of construction: 2016, working width: 70,000 mm, color: other, total width: 3,000 mm, Empty weight: 7.000 kg Serial number: 1 Working width: 7 meters Equipped with a cage roller Hard metal wear parts Transport width: 3000 mm Working depth: 5–14 cm Disc diameter: 510 mm, thickness 5 mm Number of discs: 56 (2 x 28) Working speed: 12–18 km/h Power requirement: approximately 154 kW Weight: approximately 7,000 kg Tires: 550/45 R 22.5 Hitch type: Trailed Signal lights and headlights included Nlodeznmt Dopfx Amyed Online auction of construction, agricultural, and industrial machinery (including: JOHN DEERE / DEUTZ-FAHR / CASE / NEW HOLLAND tractors, VOLVO / CATERPILLAR / HITACHI / KOMATSU excavators, wheel loaders, and MANITOU skid-steer loaders, aerial work platforms, FORD and MERCEDES-BENZ trucks, portable compressors, power generators, rollers, scissor lifts, various ROLLAND and KUHN agricultural machines, and off-road and workshop equipment, etc.), with most lots located at our own warehouse in Deinze, Belgium. The online auction opens Wednesday 22 July and closes Tuesday 4 August. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Monday 3 August Pickup day is on: - Tuesday 11 August Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: used, Year of construction: 2015, WEINIG - Rondamat 1000 CNC High-precision knife grinding machine - Automatic data import of CNC programs from the Moulder Master - Fully automatic sharpening and production of profile knives from a solid blank - Fully automatic re-sharpening of straight planer knives and profile knives in the cutterhead Grinding of planer knives in the cutterhead with standard knife projection is possible. Used machine Rondamat 1000 Year of manufacture: 2015 Grinding unit: Robust spindle carrier with precise guides for concentricity accuracy under 0.005 mm Motorized radial adjustment for various grinding wheel diameters Back relief angle fully automatically adjustable Lateral relief angle fully automatically adjustable Grinding spindle with HSK interface for fast, repeatable grinding wheel changes and high concentricity accuracy. In combination with the grinding wheel magazine, the wheel change can be carried out automatically. HSK 50 F Grinding wheel diameter min./max. 150/200 mm Grinding wheel width (Borazon, diamond) 2-3-4-10 mm Grinding wheel bore 60 mm Grinding spindle drive 1.5 kW Grinding spindle speed, frequency-controlled 1500-3000 rpm Relief angle grinding: Nodpfxoyzaz Re Amyold - radial, on knife back 10°-30° - lateral depending on the profile contour 0-20° Accessories: 3 grinding wheel holders for grinding wheel diameter 200 mm LED light for the machine interior Extras: Automatic grinding wheel measurement via optical measuring system for positioning the grinding wheel on the grinding support Measurable diameter min. - max. 145-200 mm Automatic tool changer for changing grinding wheels between profiling and finish grinding - 3 magazine slots Grinding wheel, Borazon, for profile knives in HSS and Stellite, wheel diameter 200 mm, B 151 - radius 2 mm Grinding wheel, Borazon, for profile knives in HSS and Stellite, wheel diameter 200 mm, No. 930062010, B 46 - radius 1 mm, finish grinding Grinding wheel, Borazon, for straight grinding in HSS and Stellite, wheel diameter 150 mm, No. 920072015, B 126 - width 10 mm, rough grinding 3 additional grinding wheel holders - HSK spindle for grinding wheel diameter 200 mm Coolant system: Top cooling via plastic articulated hose and from below via the knife support directly at the grinding point prevents overheating of knives even with high stock removal Dosing of coolant flow via a central distributor with stainless steel ball valves Automatic coolant cleaning through a conveyor filter system Soiled filter paper is automatically removed Coolant tank approx. 70 l Coolant additive 5 l Coolant pump motor 210 watts Tool holder: System "PowerLock" 360 For grinding PowerLock tools and large-bore tools - Max. tool weight 80 kg - Tool holder with manual HSK quick-clamping system - Spindle can be switched for right and left tools - Max. tool width 360 mm - Max. tool cutting circle 300 mm - Min. tool cutting circle 90 mm - incl. PowerLock adapter for mounting conventional tools, shank diameter 40 mm Additional HSK clamping unit Additional part fixture Automatic processing of two tools in one operation.

Condition: used, Year of construction: 1988, operating hours: 10,600 h, power: 66 kW (89.73 HP), next inspection (TÜV): 06/2027, Equipment: all wheel drive, cabin, front linkage, Mercedes Benz MB-Trac 900 turbo, vintage vehicle with front loader and 3-meter flail mower Nedpfxsxtdige Amyjld Tractor * Tractor * Towing vehicle * Vintage vehicle * COLLECTOR'S ITEM * Digital speedometer * Year of manufacture: 1988 * Date of first registration: 13.10.1988 * Next inspection: 03.2027 * Model series: WDB 440.173 * Gross vehicle weight: 6500 kg * Unladen weight: 3980 kg * Overall dimensions: 4150 mm x 2140 mm x 2810 mm * 40 km/h * Engine: OM 364 A * Diesel * 66 kW / 2400 rpm * 3944 cm³ displacement * Cabin * Radio * New tires 16.9-24 * Errors/input errors and prior sale reserved. Location and viewing of our vehicles: * STX HORSETRUCKS GERMANY, Hamburgerstrasse 65, 23816 Leezen * Service for all brands in the field of horse transporters and trailers, motorhomes * Please arrange an appointment in advance with Richard Theurer / Andreas Theurer.

Year of construction: 2013, operating hours: 3,500 h, condition: used, functionality: fully functional, machine/vehicle number: 12400, TSM/tsi oscillating sieve machines are used for the classification, screening, and dust removal of bulk materials from almost all industrial sectors, such as stones and soils, chemicals, mining, pharmaceuticals, feed, and food. The machine for sale has a diameter of 1200 mm and is equipped with 3 sieve decks with mesh sizes of 3 mm, 1.4 mm, and 0.463 mm. In addition, spare sieves with the following dimensions are included: • 16 mm x 1 piece • 15 mm x 1 piece • 0.5 mm x 1 piece • 0.16 mm x 1 piece • 0.9 mm x 1 piece • 0.86 mm x 1 piece Nledszmzbmjpfx Amyed The drive has a power of 1.5 kW, 400 VAC, 50 Hz, 1450 RPM. The machine was in operation at an R&D center in Israel. As the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price does not include packaging on a pallet.

Year of construction: 2013, operating hours: 3,500 h, condition: used, functionality: fully functional, machine/vehicle number: 12399, TSM/tsi rotary vibrating screens are used for the classification, screening, and dedusting of bulk materials from almost all industrial sectors, such as stones and soils, chemicals, mining, pharmaceuticals, feed, and food. The machine offered for sale has a diameter of 1200 mm and is equipped with 3 screen decks with mesh sizes of 3 mm, 1.4 mm, and 0.463 mm. In addition, spare screens with the following dimensions are included: • 1 mm x 1 piece • 0.5 mm x 2 pieces • 0.17 mm x 1 piece • 1.4 mm x 1 piece • 5 mm x 1 piece Nedpfezmzbgjx Amyjld • 4 mm x 1 piece • 1.8 mm x 1 piece The drive has a power of 1.5 kW, 400 VAC, 50 Hz, 1450 RPM. The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production plant in Europe. The details for optimal transport need to be clarified. The machine price does not include packaging on a pallet.

Condition: used, Year of construction: 2001, 1 unit of CLEMENS TK 150 disc harrow Weight: approximately 450 kg, serial number: 006013 Nedpezlcybjfx Amyeld Color: as shown in the pictures, see pictures and inspection Year of manufacture: 2001 Condition: used

Year of construction: 2023, condition: used, functionality: limited functionality, GÜNTHER - SPLITTER TWIN WAVE The Günther SPLITTER Twin Wave is a screening/separation machine designed for materials that are difficult to screen, especially coarse, wet, sticky, or contaminated substances. It is used to separate material based on grain size and to remove unwanted components such as stones, clay, mixed waste, or unshredded material. Nledpoy N Rlvsfx Amyjd The machine is particularly suited for construction material recycling and processing, especially for mixed construction waste, excavated soil, as well as stones and earth. The twin-wave design keeps the material longer on the screening deck, helping to better dislodge adhering or clay-heavy components.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total length: 1,280 mm, total width: 390 mm, total height: 40 mm, 120 pcs. Shelves approx. 128 x 39 x 4 cm , SSI Schäfer R3000 , II. choice (new) Shelving racks Workshop shelving , Storage racks , Manual storage , Push-in shelving , Small parts storage B40/392/70 , ZB341315 , ZB9414 Data : - Length: approx. 128.1 cm - Width: approx. 39 cm - Height: approx. 4 cm - Scope: 120 pcs. Shelves SSI Schäfer R3000 - Load : max. 100 kg per shelf - Surface : sendzimir galvanized - II. CHOICE (NEW GOODS)(This is a II. Wahl product, new and unused.II. Choice means there may be dust deposits, minimal scratches or soiling). - ex warehouse Wietmarschen Price : 960,00 € net Njdpfxozmq Tro Amysld 1142,40 € gross You will receive an invoice with VAT shown. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.