Used Optimat One for sale (7,836)

Condition: used, Year of construction: 2002, Grinding width: 1350 mm Grinding belt width: 1370 mm Grinding belt length: 1900 mm Workpiece thickness: 3 - 150 mm Feed speed: 2.5 - 13 m/min (infinitely adjustable) Drives: Grinding unit: 15 kW Total connected load: 17 kW Weight: approx. 2400 kg Dimensions: 2000 x 1850 x 2100 mm Storage location: Nattheim Nsdpfeytrfksx Afajcr

Condition: used, machine/vehicle number: 008019, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 40 m/min Maximum panel thickness: 60 mm Ncedpfx Aowvq E Njfasr

Condition: excellent (used), Year of construction: 2008, Working width: 1100 mm Workpiece thickness: 3 – 160 mm Abrasive belt dimensions: 1,120 x 1,900 mm Variable feed speed: 2.6 - 13 m/min Feed motor output: 1.10 kW, 400 V, 50 Hz Extraction port diameter: 2 x 160 mm Compressed air supply: 6 bar Dimensions (L x W x H): 1705 x 1545 x 1905 mm 1st unit: Steel contact roller, diameter 160 mm Motor output: 15 kW, 400 V, 50 Hz Ncodpfx Afoychqzjaor 2nd unit: Combination unit with rubber-coated contact roller (Sh 65), rigid sanding shoe Motor output: 11 kW, 400 V, 50 Hz Abrasive belt cleaning via compressed air 3rd unit: Cleaning brush Multi-function display Multi-function lever (conveyor belt, workpiece thickness adjustment) Electronic belt oscillation Pneumatic conveyor carpet oscillation Motorized workpiece thickness adjustment with LED display in 0.1 mm increments Units with emergency braking system Emergency stop button at infeed & outfeed Motor protection switch Roller table extension at infeed with 2 loose rollers Automatic star/delta start Complete documentation Note for used machines: • Specifications and prior sale subject to change. • Stated prices are ex works – loaded free of charge! • The machine has been cleaned and functionally tested. • All machines are sold as seen, without any warranty or guarantee. Buyers are welcome to inspect the machine on site. • Special agreements are only possible in written form. (We only respond to inquiries providing your address and telephone number!)

Condition: used, BRANDT Optimat KDF340 Edge Bander Pre-milling cutters Adhesive application by roller Pneumatic pre-cut guillotine Pressure rollers End-cutting saws Top-bottom milling unit R1-R2 Profile scraper Polishing unit Max. workpiece height: 45 mm Max. edge thickness from roll: 3 mm Ncedpey Dc Uljfx Afajr Feed speed: 10 m/min Machine length: 350 cm Machine inspected, ready for operation

Condition: used, Year of construction: 2007, total height: 1,200 mm, total length: 3,600 mm, total width: 1,480 mm, - Machine available from: 2025-12-15 - Year: 2007 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: - Number of units [pcs]: 8 - └ 1st unit type: Pre-milling unit - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: Yes Ncsdpfx Afjx Ei Syjasr - └ 5th unit type: Rough milling unit - - Tools available: Yes - └ 6th unit type: Radius scraping unit - - Tools available: Yes - └ 7th unit type: Flat scraping unit - - Tools available: Yes - └ 8th unit type: Brushing unit - Voltage [V]: 400 - Current consumption [A]: 50 - Transport dimensions: 3600mm x 1480mm x 1200mm (l x w x h) - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2008, total height: 1,800 mm, total length: 10,000 mm, total width: 2,200 mm, Weight: 5.500 kg - Year: 2008 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: - Number of units [pcs]: 8 - └ 1st unit type: Pre-milling unit - └ 2nd unit type: Glue unit - └ 3rd unit type: Cap unit - └ 4th unit type: Rough milling unit - └ 5th unit type: Rough milling unit - └ 6th unit type: Radius scraping unit - └ 7th unit type: Flat scraping unit - └ 8th unit type: Brushing unit - Voltage [V]: 400 - Current consumption [A]: 43 - Fuse [A]: 50 - Transport dimensions: 10000mm x 2200mm x 1800mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Ncedpfjychw Iex Afasr Yorick Diebels

Condition: good (used), Year of construction: 2008, machine/vehicle number: 0-260-20-1170, Kantfräs & kap Brandt Type: Optimat FTK 130 No: 0-260-20-1170 Year: 2008 The FTK 130 has been conceived as complementary to edge banding machines. The main application of the FTK 130 is shaped workpieces, where Ncedpfx Afjq Ehpaoaer internal as well as external radie can be processed. Also straight workpieces can be easily processed. Shaped workpiece trimming technology For small shops the FTK 130 is offering a flexible and cost effectiv solution for their trimming requirements. In order to process internal and external shapes, the trimming motors are mountedvertically. Milling and cutting units for simultaneous upper and lower radius/clean milling of excess edging material on workpieces with straight edges and on rounded workpieces with internal and outside radie. Cutting unit to precisely cut excess front and back edge trim material. in the longitudinal direction of the working pressure. Techn info: Milling unit Workpiece thickness approx. 12-55mm Workpiece width min approx. 30mm Inner radius min.ca.35mm Edging thickness max. approx. 3mm Milling tool 2xWPL radius cutter r=3, diameter 67x21x16mm Milling motors 11000v/min Cutting unit Workpiece thickness 12-55mm The thickness of the edging material max. 3mm Saw blade diameter 100mm Sawing width 3mm Center hole 36mm Compressed air 6 bar, connection 1/2", approx. 2000PA Air consumption per stroke approx. 10NL Extraction power diameter 80mm, 510m3/h, air speed 28m/sec Current 400 volts, 2.5kw 50 hz, 3 phase, 16A Dimensions: 1130x765x1480mm (lxwxh) Weight 320 Kg Stock no: 2001877BXA

Year of construction: 2026, condition: new, functionality: fully functional, power: 0.7 kW (0.95 HP), overall weight: 557 kg, total length: 1,306 mm, total width: 1,876 mm, total height: 1,993 mm, input voltage: 230 V, Equipment: documentation/manual, emergency stop, type plate available, Applications & Customer Benefits: Njdpfx Aowyl Efefaocr The ASCO VS Compact One Deck vibration screen ensures efficient separation of soil, gravel, wood chips, and construction waste for recycling, construction, agriculture, and landscaping. Its flexible design improves productivity and simplifies material handling across diverse operations. Key Features: • Semi-mobile, foldable design for easy transport and setup • Adjustable screen angle for precise material adaptation • Quick-change screen decks supporting multiple mesh options • Dual vibration motors for high screening performance • Modular system for fast expansion and operational flexibility Tech Highlights: L 1,31 m · H 2 m · W 1,88 m · Qmax 18-23 t/h · Power 2 x 0,35 kW · Weight 557 kg · Bucket width 1,6 m

Condition: ready for operation (used), Year of construction: 2003, operating hours: 5,553 h, number of axes: 3, total height: 3,000 mm, total width: 5,000 mm, spindle motor power: 9,000 W, product length (max.): 8,400 mm, spindle speed (max.): 24,000 rpm, This 3-axis Weeke Optimat BHC 550 was manufactured in 2003. It features a spacious table size of 4250 x 1300 mm and a powerful 9 kW main spindle with infinitely variable speeds from 1250 to 24000 rpm. The machine includes an 18-position tool changer and a drilling/milling unit with multiple configurations. If you are looking to get high-quality CNC wood machining capabilities, consider the Weeke Optimat BHC 550 machine we have for sale. Contact us for further details. • Table size: 4250 x 1300 mm • 8 consoles incl. lifting rail • Dual-circuit vacuum block suction • Vacuum connection for stencil operation • Y-stop rail for top layer overhang • Main spindle: HSK F63, liquid recirculation cooling • Max. tool diameter: 180 mm • Aggregate interface for main spindle, C-axis with torque transmission and 3-point support • Tool changers: 18-position (moving in X), 8-position (moving in Y) • Drilling/sawing/milling unit with ER25 • Drilling/milling unit, manually tiltable 90°, with ER25 • Drilling unit: horizontal in X: 4; horizontal in Y: 2; vertical: 19 • Groove saw in X direction, tool diameter 100 mm • Handheld terminal for machine control with potentiometer • Control/software: Windows XP, WoodWOP 5.0, network connection possible • 2004 new hard drive Additional equipment Ncjdpfxsyxrdrs Afaer • Vacuum pump (included)

Condition: not inspected (used), Year of construction: 2004, functionality: unexamined, workpiece length (max.): 2,500 mm, TECHNICAL DETAILS Nodpjyxnapjfx Afaocr Panel length min.: 300 mm Panel length max.: 2,500 mm Panel return system for edge banding machine: Left Panel ejection: via air nozzle table The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7877

Condition: used, Year of construction: 1996, Edge thickness: 0.4 - 12 mm Roll edge: 3 x 45 mm or 0.8 - 60 mm Minimum workpiece width: 65 mm Minimum workpiece length: 160 mm Workpiece thickness: 10 - 55 mm Feed rate: 13 m/min Pre-milling (joining) Glue pot Quickmelt Gluing unit Trimming Flush trimming Chamfering Radius trimming Corner rounding Flat scraper Buffing unit Machine dimensions: 7450 x 1220 x 2400 mm Weight: 3000 kg Nedpevvkd Tsfx Afajcr Storage location: Nattheim

Condition: excellent (used), FLEXIBLE SYSTEM OF SINGLE-SIDE EDGEBANDING (BATCH ONE) Composed of the following machines: M.01) PANELS HANDLING and RETURN SYSTEM Mod. PROFI TBR100/20/30/F M.02) SINGLE-SIDE EDGE BANDER (RIGHT-HAND machine)"HOMAG" Mod. Profi KAR350/12/A Panels thickness (min/max) mm 8 / 60 - Working width (min/max) mm 200 / 1200 Numerical Control / Software PC 22 Adjustable feeding speed (m/min ) 18 - 32 Panels in-feed system WZ 14/30 Pre-milling Unit (vertical joint trimmers) adjustable by N.C. (2 x Kw 3) DOUBLE Glueing Unit (P.U.R. Glue + Quick Melt unit) 2 x PU 34 Pressure zone (N.C. adjustment) - Edge coils supporting unit (No. 12 reels) Snipping (end-cutting) unit WK13 Rough Trimming unit (2 x Kw 055) Fine Trimming unit (Multi-profile, adjustable by N.C.) MF 21 (2 x Kw 0,55) Corner Rounding unit (Contour Trimming) FF 32 (4 x Kw 0,4) Multi-Profile Copying unit adjustable by N.C.(fine and contour trimming) FK 31 (30 m/min) recently added (in a technological "revamping" operation) Nedpfxsinigme Afaecr Profile Scraping unit (Multi-profile, adjustable by N.C.) MN 21 (servo) Finish processing unit (Glue scraper + Buffing unit) FA 11 Jumping Milling grooving unit UF 11 (1 x Kw 4) M.03 ) PORTAL BRIDGE (UNLOADING/LOADING) "BARGSTEDT" Model. TFU200/L/30/12/S

Condition: repair required (used), Year of construction: 2001, functionality: limited functionality, overall weight: 850 kg, input voltage: 380 V, FOR SALE: Industrial Meat Slicer FTC ONE-ALL (Sweden) Professional, heavy-duty slicer (850 kg) for high-capacity meat processing. Rugged Swedish construction, similar to Grasselli machines. -Best for: Perfect for pastrami or thin deli meats with 2.0 mm precision cut. Ncjdpjyy S Utofx Afaer -Performance: High speed, slices up to 2 tons per hour. -Condition: Solid build, but the pneumatic pressure cylinder needs repair/replacement. -Benefit: Preserves the original product shape and eliminates slicing losses. -Capacity: Max product size 360x350x135 mm. Industrial quality at a fraction of the price. Message me for more photos and catalog details.

Condition: used, Year of construction: 2019, functionality: unexamined, machine/vehicle number: SN070, paper weight (min.): 135 g/m², paper weight (max.): 450 g/m², paper width (min.): 210 mm, paper width (max.): 364 mm, paper height (min.): 297 mm, paper height (max.): 750 mm, total length: 4,020 mm, total width: 1,200 mm, total height: 1,800 mm, space requirement length: 4,020 mm, space requirement width: 1,200 mm, space requirement height: 1,800 mm, type of input current: AC, input current: 40 A, input voltage: 240 V, Equipment: documentation/manual, We are offering this used MGI JETVARNISH 3D One digital printing machine, year of manufacture 2019. Voltage: 220–240 V Frequency: 50–60 Hz Short-circuit current rating (SCCR): 10 kA Current: 2×20 A Model: JETVARNISH 3D One Serial number: JVD1-070 Date of manufacture: 12.2019 Year of construction: 2019 Note: We do not provide any warranty for this machine, it is sold as shown in the pictures provided. The machine was stored packaged in a warehouse for two years due to restructuring. Configuration: KONICA MINOLTA PRINTHEADS - Exclusive MGI inkjet technology - Line widths from 0.5 mm possible INTEGRATED INLINE DRYING - On-the-fly drying and curing via integrated LED UV dryers - No additional drying time required - Low energy consumption PAPER DELIVERY - Automatic stacking of prints onto pallets - Minimum format A4 - Maximum format 36.4 x 75 cm DIGITAL ADVANTAGES - Ideal for profitable small and medium print runs - Fast setup - No plates or screens required - Digital varnish form (tiff) required as 5th color - Wide range of substrates possible VARNISHING ON DIGITAL AND OFFSET PRINT SHEETS - Spot varnish directly onto toner (no lamination required for most toners) - Varnishing over offset prints or laminated sheets - Accurate registration by AIS scanner, no register marks needed - Fast and easy digital production - Maximum varnishable area per sheet: 35 x 74 cm VARIABLE VARNISH THICKNESS - Adjustable to individual customer requirements - Maximum 3D effect: 116 μm - Minimum thickness (on laminated surfaces): 21 μm - Minimum thickness (directly on toner): 21 μm SOFTWARE SUITE - On-the-fly job management - Reprint functionality - Image editor - Library of different patterns - Intuitive operation - Time and cost saving OPTICAL SHEET CONTROL - Artificial Intelligence Smart Scanner - Precise registration - Sheet skew and misalignment correction - 300 individual reference points per sheet - Individual correction for each sheet - No marks needed (if contrast is sufficient) - Fast, straightforward setup MEDIA HANDLING - Paper weights from 135 gsm up to 450 gsm - UV spot varnishing directly on digital prints without prior - Full surface varnishing or lamination (not with all toners) ENVIRONMENTALLY FRIENDLY - Varnish in closed loop system - No cleaning required between jobs - No wastage between jobs - Reduced paper, varnish, and energy consumption DIMENSIONS - 4.02 x 1.2 x 1.8 m (L x W x H) - 1 meter clearance required on all four sides - Weight approx. 1,200 kg Nsdpfjyypcnex Afajcr ELECTRICAL DATA - 7.5 kW (32 A), operating temperature: 18 to 30°C - Relative humidity: 30 to 50% (non-condensing) Included: - Corona charging unit - Required for processing prints from various toner systems - VDP barcode scanner If you have any questions or require further information, please feel free to send us a message or call us. Note: We do not provide any warranty for this machine.

Condition: used, machine/vehicle number: 008394, Max. panel width: 3800 mm Nodpfoygtbtex Afascr Max. panel length: 3800 mm Main saw blade projection: 55 mm No of Grippers: 4

Condition: excellent (used), functionality: fully functional, machine/vehicle number: -, Year of construction: 2021, operating hours: 3,394 h, The machine is fully functional, and in very good condition. All the accessories included - wrench for nozzle change, shims for bedlevelling, grease for nozzlechange. Included in the package some spares: 2 nozzles and tube replacement set. Drybox. Ncjdpfjyyak Aex Afajr

Condition: not inspected (used), functionality: unexamined, Hartridge Diesel Injector Service Equipment – Injectomatic One + Injector Reconditioning Machine Manufacturer: Leslie Hartridge Ltd Country of Manufacture: England Machines Included 1. Hartridge Injectomatic One – Nozzle Reseating Machine 2. Hartridge Diesel Injector Nozzle Reconditioning / Grinding Machine _____ Description Complete diesel injector service equipment setup manufactured by Hartridge, a globally respected manufacturer of diesel fuel injection testing and service equipment. This package includes the Hartridge Injectomatic One nozzle reseating machine along with a Hartridge injector nozzle reconditioning / grinding machine, used for restoring and servicing diesel injectors. Ncsdpfx Afeyx Sg Hsaer These machines were widely used in professional diesel workshops for injector maintenance and refurbishment. _____ Hartridge Injectomatic One • Diesel injector nozzle reseating machine • Used to restore worn injector sealing surfaces • Precision alignment and controlled reseating process • Timer control and emergency stop • Industrial workshop equipment _____ Hartridge Injector Reconditioning Machine • Precision injector nozzle grinding / lapping machine • Used for injector repair and refurbishment • Heavy-duty Hartridge engineering • Includes fixtures and tooling shown in photos • Ideal for diesel injector service workshops _____ Applications • Diesel fuel injection service centers • Agricultural machinery repair workshops • Truck and heavy equipment maintenance • Diesel engine specialists • Technical training facilities

Condition: new, Year of construction: 2025, NEW CONTAINER / ONE WAY / Year of manufacture 2025 Ncsdpfx Afeg S Ab Rsaer +Lock box +Forklift pockets Color: RAL 5010 , RAL 7016, RAL 7035, RAL 6007, RAL 9010, RAL 7042, RAL 7015

Condition: good (used), A Krüss Mobile Surface Analyzer is for sale in good, used condition, as shown in the photos. Technical Specifications: • Manufacturer: KRÜSS Nedpfx Asyx Agdofaecr • Model: Mobile Surface Analyzer MSA One • A powerful instrument for quality control of pretreated, coated, or cleaned surfaces • Scope of delivery as shown • Condition: Used Insured shipping costs: €10 You will receive an invoice with VAT shown. Viewing/pickup is possible by appointment in 42855 Remscheid. Sale from location 42855 Remscheid, customer loads. Subject to errors in technical specifications and prior sale. Storage location: G4

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: AH/335516, functionality: fully functional, input voltage: 400 V, input current: 68 A, Equipment: CE marking, TECHNICAL DETAILS Number of processing units: 10 Nsdpfx Aoyuyluofaocr 1st unit: Spraying device Tools included 2nd unit: Glue applicator 3rd unit: Pressure rollers Tools included 4th unit: End trimming unit Tools included 5th unit: Rough milling unit Tools included 6th unit: Corner rounding unit Tools included 7th unit: Radius scraping unit Tools included 9th unit: Flat scraping unit Tools included 10th unit: Brushing unit Tools included MACHINE DETAILS Voltage: 400 V Current consumption: 68 A Number of transport packages: 2 EQUIPMENT CE marking

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, total width: 650 mm, total length: 670 mm, total height: 1,490 mm, DGUV certified until: 04/2027, type of input current: three-phase, overall weight: 385 kg, Roll Press Eberhardt Optimat S Portion range: 30 to 90 grams/piece Dough input: 900 to 2800g Nodjyundljpfx Afaecr Roll press with 3 moulding plates Floor-standing machine, 30 divisions Dimensions approx.: 650 x 670 x 1490 mm (W x D x H) Connection: 400 V, 16A-CEE plug Used machine, cleaned Options: Service package E-Box New moulding plates Maintenance contract Feel free to visit us!

Condition: used, Year of construction: 2003, machine/vehicle number: KL 77/A20/S2, functionality: fully functional, feed rate X-axis: 20 m/min, total length: 9,000 mm, Equipment: documentation/manual, We are offering this used HOMAG Optimat kL 77/A20/S2 EVENT edge bander, year of manufacture 2003. Manufacturer: HOMAG Model: Optimat kL 77/A20/S2 EVENT Year of manufacture: 2003 Nedpfsyw N Apox Afaecr Condition: used Type: edge bander Edge bander for sale due to purchase of a new machine. The machine is currently still in use and fully operational. It is a very robust machine, including a return system. Very stable and always delivers a perfect finish! Equipment: - Nozzles - Format cutters, 100mm diameter - Blow-off unit - Preheating unit - PUR bonding with cartridge heating station - 7 pressure rollers - Crosscut saws, straight and mitre - Top and bottom roughing cutters - Profile cutters, radius 1/2mm - Profile/flat scrapers - Nozzles - Polishing brushes - Machine equipped with top and bottom belts (very stable design) - Height adjustable at the front (automatic) - Profile cutters automatically adjustable via the program - Crosscut saws automatic - All functions can be switched on/off via the front screen - Return conveyor operated from the PC ->Demo available upon request! Price to be discussed via private message. Please do not hesitate to contact me if you have any questions. If you have any questions or require further information, feel free to send us a message or give us a call.

Condition: excellent (used), Brandt Optimat KDN340 Edge Bander Glue application by roller Tank features exchangeable system (machine is supplied with only one tank) Pneumatic pre-cut guillotine Pressure rollers End-trimming saws Top/bottom milling unit R1-R2 Profile scraper Nsdpeywwqzjfx Afaocr Polishing unit Max. workpiece height: 45mm Max. edge thickness (in roll): 3mm Feed speed: 10m/min Machine length: 310cm The machine is well-maintained and in very good condition.

Condition: ready for operation (used), Year of construction: 2006, Edgebander manufactured in 2006. This HOMAG Optimat KAL 330 features a flexible production layout for furniture parts, accommodating workpiece dimensions from 250 to 3000 mm in length and 120 to 1200 mm in width. It includes a single-sided edge banding machine capable of processing various edge materials up to 20 mm thickness. If you are looking to get high-quality edge processing capabilities, consider the HOMAG Optimat KAL 330 edgebander we have for sale. Contact us for further details. • Line workpiece capacity: • Length 250–3000 mm • Width 120–1200 mm • Thickness 8–60 mm • Edge bander (KAL 330) — base and transport • Continuous machine base; workpiece support with roller bar extendable ~800 mm • Transport chain 80 mm wide with rubber surface; precision guidance, hardened surfaces • Top pressure: driven belt • Technical data: • Feed speed 18–25 m/min • Working height 950 mm • Minimum working width: 55 mm at 22 mm thickness; 100 mm at 60 mm thickness (depending on workpiece length) • Workpiece overhang/supernatant 30 mm • Workpiece thickness 12–60 mm • Edge material from strip: 0.4–20 mm (max cross-section 900 mm²) Nsdpfx Ajytf Irsfajcr • Edge material from coil: 0.3–3 mm (max cross-section: PVC 135 mm², veneer 100 mm²) • Max coil diameter 830 mm • Pneumatic connection 7–8 bar • Infeed system and controls (integrated with KAL 330) • Flexible workpiece infeed system wz10 for automatic infeed (lengthwise and crosswise); for precisely sized, square parts • Stepless infeed guidance adjustment (axis), speed set at input terminal • Automatic side adjustment of units (workpiece overhang 30–80 mm) for gluing and post-processing • Input terminal; solvent applicator top/bottom • Edge preparation and gluing • Pre-milling unit: 2 motors, each 4 kW, 150 Hz, 9000 rpm; electro-pneumatic control • Stepless vertical axis SF20 for automatic centering to panel thickness • Pre-melting unit with granule storage • Quick-lock system for QA/QE application unit; QA front glue storage for color change • Basic gluing unit A20; magazine height adjustment ±5 mm (manual spindle) • Extended magazine A6/A-E12/A20 for 2 coils (max Ø 830 mm); preheating station for QA/QE • Automatic pressure zone adjustment • Trimming and milling • Trimming unit HL84 with standing trimming stop for sensitive edges • Pneumatic trimming motor adjustment (2 positions: flush/level and with overhang for contour milling) • Pneumatic chamfer/straight changeover; manual side trimming stop adjustment when edge thickness changes • Rough milling unit: 2 motors stacked, each 1.5 kW, 200 Hz, 12,000 rpm; height adjustment via top pressure • Pneumatic 2-position setting: roughing with ~0.2 mm overhang / without overhang • Reserved free space for a fine milling unit • Contour milling unit Servo FK13 automatic: • 2 motors each 0.4 kW, 200 Hz, 12,000 rpm • Servo-controlled movements; automatic 8-fold tool changer • Feed speed max 20 m/min; minimum spacing between workpieces 500 mm • Workpiece thickness 12–60 mm • Automatic FK adjustment for identical radii on different edge thicknesses; auto retract • FK workpiece guidance with additional clamping for min part length 120 mm (single-sided) • Finishing and cleaning • Multi cleaning unit MN21 automatic: • Up to 3 profiles; tracing from top/bottom/side for chamfer and rounding on pre-milled PVC edges • Electropneumatic air nozzles; automatic chamfer/radius changeover; auto retract of upper/lower tool • Height adjustment via top pressure • PVC shavings separator top/bottom

Condition: used, Year of construction: 2007, functionality: fully functional, For sale: vertical CNC machining center Weeke Optimat BHX 500, year 2007, designed for drilling, milling, and slotting panel materials in the furniture industry. The machine allows fast and precise processing of components and is suitable for both series and custom furniture production. Technical specifications: Model: Weeke Optimat BHX 500 Year: 2007 Machine type: 3-axis continuous CNC machining center CNC control: WoodWOP (Homag / Weeke) Maximum workpiece length: approx. 3050 mm Maximum workpiece width: approx. 1200 mm Maximum workpiece thickness: 80 mm Minimum workpiece length: approx. 200 mm Minimum workpiece width: approx. 70 mm Equipment: Drilling head with multiple vertical and horizontal spindles 96 drilling spindles (48 top, 48 bottom) 36 vertical tools 12 horizontal tools Slotting saw Milling cutter (top and bottom) 125 mm saw, rotatable 90° Automatic clamping workpiece transport Applications: Ncedpfx Asywgb Njfasr Drilling for dowels and fittings Milling and slotting Processing of particleboard, MDF, HDF, plywood, and solid wood Advantages: Ability to process two pieces simultaneously, significantly increasing productivity Quick setup and workpiece change High precision in drilling and milling Ideal for manufacturing case furniture, kitchens, cabinets, and interior fittings Condition: Machine is regularly maintained and operational Test run possible upon inspection Delivery: June 2026