Used Omal Insert 900 for sale (6,522)

Condition: good (used), Indexable insert drills, high-performance drills with indexable inserts, solid drills, end mills, shank cutters, milling cutters, indexable insert milling cutters, shank cutters with internal cooling, indexable end mills, indexable insert drills -Finger end mill: Indexable insert end mill with internal cooling -Hole: Ø 50 mm -Diameter: Size/reversible inserts see photos -Dimensions: Ø 70 x 285 mm -Weight: 2.8 kg Lredpfx Aj Aaymxob Aju

Condition: good (used), Indexable insert drills, high-performance drills with indexable inserts, solid drills, end mills, shank cutters, milling cutters, indexable insert milling cutters, shank cutters with internal cooling, indexable end mills, indexable insert drills Ljdpfxs Aa I Eps Ab Aoru -Indexable insert end mills: Indexable insert end mills with internal cooling, 2 pieces -Hole: Ø 20 mm -Drill diameter: 20 mm -Submission/Price: complete -Transport dimensions: 20/40//H155 mm -Weight: 0.6 kg

Condition: like new (used), Year of construction: 2014, operating hours: 10,000 h, load capacity: 8,000 kg, lifting height: 3,750 mm, fuel type: electric, mast type: duplex, construction height: 3,050 mm, Manufacturer + model: KALMAR ECF 80 / 9 * Lredezv Rr Tepfx Ab Asu Mast: 2F3750 ID: 26082.8386 Category: Used Mast: 2F3750 Lowered height: 3050 mm Lifting height: 3750 mm Capacity: 8000 kg Year: 2014 Hours: 10000 hours Capacity: 80v / 1550ah Options: Equipped with: - FULL cabin - Air conditioning - Central lubrication system - Joystick control for forward/reverse - Spreader / S.s. - Complete street lighting !! - 2 x Blue spot lights - LED floodlight - Duplex FFL mast - Complete NEW -> FEM 4 A - FORKS - Camera Non-marking tires

Condition: not inspected (used), Year of construction: 2013, Bore diameter , mm Number of heads horizontal , St. Lrjdpfx Absv N N Sps Asu Number of heads vertical , St. Götzinger Drilling and Milling Centre ----- For sale on behalf of a client! Machine for ‘left-hand’ and ‘right-hand’ parts. The machine was controlled via window-making software, but can also be operated via the machine’s own software. The machine is equipped as follows: - Drilling units on the left and right for end-face drilling. - 3 units for drilling and milling for longitudinal machining. - Parts are loaded once and the unit carrier then moves to perform the various machining operations. Machine installation length approx. 6 m. For further information, see the attached PDFs.

Condition: used, all stainless steel Lodpfx Absz S Hvxe Aoru with top hold down belt water circulation net belt length 8.000 mm net belt width 900 mm adjustable speed lifting unit with electrical hoists dimensions (l x w x h): ± 9.000 x 1.800 x 3.850 mm

Condition: used, Year of construction: 2005, functionality: fully functional, overall weight: 2,000 kg, The machine cuts A4 or A3 formats into sets of 100 or 200 sheets and simultaneously packs this quantity into slip lid boxes, so that the operator only needs to close and seal the lid. Ideal for materials such as photo paper, inkjet films, and all desktop products distributed in A4 boxes for the home office. Max. master roll width: 1280 mm. The machine is fully functional and connected. Test cutting is possible at any time. We also handle professional dismantling and loading onto a truck/container. Lrsdpfjxvrm Sjx Ab Aeu

Year of construction: 2016, condition: used, Mebor VR 900 edger with one mobile saw blade. Ledpfsygqyysx Ab Aeru

Condition: used, machine/vehicle number: 2001 5170, For sale is a KUPER FWJ 900 veneer assembly machine manufactured in Germany. The machine is in good, well-maintained used condition and is immediately ready for professional use in veneer processing. The FWJ 900 operates with glue threads and hot air and is suitable for assembling or joining veneer sheets. The machine has an overhang of 900 mm and is operated via a foot pedal. Technical data: Manufacturer: KUPER Type: FWJ 900 Machine number: 20015170 Overhang: 900 mm Process: Veneer assembly with glue threads Heating: Hot air Feed rate: approx. 7 m/min Veneer thickness: approx. 0.4–2.0 mm Operation: Foot pedal Stationary model Compressed air connection: available Includes a large work table in front of the machine Includes a work table behind the machine Lodpfx Abjz Ep R Rj Ajru Inspection and functional testing possible while powered on The existing work tables offer a generous support area and are ideal for processing larger veneer sheets. The machine can be inspected on-site while powered on and its functionality can be tested.

Condition: excellent (used), functionality: fully functional, engine power 18.5 kW feed hopper press drawer 2 cm screen Ljdpfx Aboz D Acqs Aoru year 2011 380 V

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Frozen Block Saw/Slicer – Kraftschneidmatic 900 SZ Manufacturer: Ballweg + Bottner GmbH Model: Kraftschneidmatic 900 SZ Serial number: 72000910 Year of manufacture: 2017 Power supply: 400 V / 50 Hz / 16 A Rated power: 1.1 kW Weight: 820 kg Dimensions: 1200 × 1350 × 2200 mm Lodpfjw Trt Iex Ab Ajru The Kraftschneidmatic 900 SZ is an industrial machine designed for slicing frozen blocks. The unit features a robust steel construction, intuitive control panel, and high cutting precision.

Condition: excellent (used), Year of construction: 2007, Engel Insert 80V/80V/100 2F / 2-K tie-bar-less machine, vertical / Perfect technical condition Year of manufacture: 2007 Injection unit: Screw diameter: 2 x 25 mm Injection weight: approx. 49 g Injection pressure: 1214 bar Metering volume: 54 ccm Clamping unit: Clamping force: 100 t tie bar distance: 0x0 mm Ejector: hydraulic Clamping unit: hydraulic Control unit: CC 200 Ljdpfxez Ipn Ie Ab Ajru Additional equipment: Tie-bar-less machine with two vertical injection units, with turntable. Air valve x 6 Hydraulic core puller x 2 Control system with hot runners x 12 Infrared protection curtains Thermoplastic and rubber injection units are available for this machine Turntable diameter: 1200 mm The machine has been regularly serviced by the authorized service Engel in Germany Dimensions: Weight: 9400 kg Length/width/height: 4.85x1.47x2.30 m Propulsion: Pumps/motor: 30 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Year of construction: 2019, condition: used, Chain crane with trailer Manufacturer: TGT Type: Robby 900 XL Year of manufacture: 2019 Technical data - Palfinger crane 1500 - Forklift lift of 1.8 m - Outriggers fully hydraulic - with KTL coating - installed on a crawler chassis - telescoping chassis width Lredszuz Ngepfx Ab Asu - Working height: approx. 6.5 m - Tare weight: approx. 1700 kg - Fork load capacity: 2000 kg - Crane load capacity: up to 900 kg - Quick-change system for switching between crane and forks - Honda engine Note: The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is not binding.

Condition: used, Year of construction: 1980, centre distance 900 mm 440 weight of the machine ca. 3 t Lredpfxjztfzks Ab Aeu

Year of construction: 1995, condition: used, COMI SL2000 x 900 x 550mm Thermoforming Machine. S/No. 646 (1995) TECHNICAL DATA OF THE EQUIPMENT Max. frame inner size mm 2005 x 905 Scrap cutter motor power kW 3 Max. tool base size mm 2000 x 900 Lrodpfx Abez I Sbde Aeu Scrap conveyor motor power kW 0.37 Min. tool base size mm 700 x 500 Finished workpiece discharge belt motor power kW 0.75 Max. sheet size mm 2090 x 960 Cross-cutting motor power kW 0.25 Min. sheet size mm 790 x 560 Cross-cut scrap conveyor motor power kW 0.22 Max. tool height mm 800 (550+250) Transfer unit motor power kW 1.5 Maximum formed workpiece height mm 550 Auxiliary units max. consumption kW 5.10 Max. sheet stack height mm 1000 Max. installed power kW 375 Max. pallet height mm 180 Tempering unit power kW 52 Upper heating power kW 83.3 Power consumption at 70% load kW 262.5 Lower heating power kW 71.3 Vacuum pumps capacity m3/h 750 (250x3) Upper preheating power kW 52 Tool vacuum tank capacity L 2000 Lower preheating power kW 46.8 Bell vacuum tank capacity L 2000 Oil pump motor power kW 19 (15+4) Required oil quantity L 600 Vacuum pump motor power kW 23.4 (7.8x3) Required air pressure kPa 600 Sheet centering motors power kW 0.24 (0.12+0.12) Incoming water pressure kPa 200-300 Sheet feed motor power kW 2.2 Max. hydraulic operating pressure MPa 18 Sheet feed width-adjustment motor power kW 2.2 Hydraulic operating pressure MPa 10 Sheet picker motor power kW 0.37 Incoming water temperature °C 12-20 Location: These lots are located in Susegana, Treviso, Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: good (used), functionality: fully functional, Year of construction: 2017, operating hours: 4,025 h, fuel type: diesel, STILL RX 70 - 80/900 forklift Year of manufacture: 2017 Operating hours: 4025 DEUTZ engine Load capacity: 8,000 kg at a load center of 900 mm Own weight: 16,500 kg Mast: 2-stage telescopic mast Mast height: 2,860 mm Lifting height: 3,050 mm Cab height: 2,685 mm Fork dimensions: 2,400 mm x 200 mm x 80 mm (FEM 4 A) Equipment: Comfort full cabin, with heating Free auxiliary hydraulics Side shifter (Kaup DSL4R) Audible reversing warning LED reversing lights Warning light on the overhead guard Twin tires at the front Durwen Langguttraverse Type LGT 80 Year of manufacture: 2021 Nominal capacity: 8,000 kg at a load center of 600 mm Width: 4,000 mm Length: 2,400 mm Lrsdpfxe Ab Az Is Ab Aju Ideal for tubes, profiles, and plates.

Condition: used, Type ID 900 Especially suitable for pasta twin shaft with paddles all stainless steel 2 motor: 2 x 4kW safety lid Ljdpfx Ajzzlr Eeb Aoru dimensions (l x w x h) : ± 2.550 x 1.000 x 1.300 mm

Condition: used, Year of construction: 1997, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Travel ranges X-axis: 710 mm Y-axis: 630 mm Z-axis: 500 mm Spindle and tool holder Spindle speed: 5–5,000 min⁻¹ Drive power of the working spindle: 11 kW Tool holder: SK 40 Tool changer Tool changer: 44 tools Feed rate Feed rate: 10 m/min Ljdj Aa Aqtjpfx Ab Aoru Work table Clamping area: 1,200 × 600 mm Table load: 0.5 t Control system Control system: Heidenhain TNC 426 Performance data Total power requirement: 15 kVA Machine weight: approx. 4.24 t Machine design Guideways: Flat guideways on all axes Guideway protection: Scrapers and steel covers EQUIPMENT Tool changer with 44 tools Heidenhain TNC 426 control system Wired Heidenhain handwheel Flat guideways on all axes Scrapers on the guideways Steel covers for guideway protection

Condition: used, all stainless steel water circulation net belt length 9.000 mm net belt width 900 mm adjustable speed lifting unit with electrical hoists dimensions (l x w x h): ± 11.500 x 1.600 x 3.000 mm + "IGEFA" tube heat exchanger Lrodpfx Ajz I N Stsb Aeu Type 161U-159-159 380 kW + Conveyor belt with flights belt width: 800 mm distance between flights: 190 mm height of flights: 50 mm

Condition: repair required (used), Year of construction: 1970, functionality: not functional, This is a part of the DKT 900 cone crusher, manufactured by PSP Přerovské strojírny. It is a crusher frame intended for complete reconstruction and repair and is being offered at a liquidation price. Lodpfezmdlhjx Ab Ajru Estimated weight: 2,800 kg.

Condition: used, TOX Type: EMB 030.068.A.001 TOX Pressotechnik Insertion Press, TOX-C-C-Frame Press Pneumohydraulic manual workstation with process monitoring for inserting functional elements. Technical data: Drive: KWE3O.0O.17O.10H Pneumatic connection: G3/4'' Compressed air preparation: Filtered and dried compressed air, max. particle size 40 µm Air pressure, working process: Pmin. = 3.0 bar, Pmax. = 6.0 bar Pressing force: 170 kN Total stroke / Return stroke: 170 mm / 10 mm Control: STE 326-366-3/4"-90-230V/AC, special, complete Electrical connection: 90-230V/AC Ambient temperature, operation: Tmin. = 10°C, Tmax. = 60°C TOX Insertion Monitoring System EPW 500FP, Force/Travel Measurement Holding device ZHE for TOX press Dimensions: Width 1917.5 mm, Height 2506 mm, Depth 1917.5 mm Safety guard circuit: Leuze B20/B21 light curtain Insertion tool: See (Images 15 to 18) Insertion sleeve (Image 17): 24.5 ∅ mm Application: Insertion Weight: 2200 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have by telephone. Ledpfxozd Rhko Ab Asru

Condition: used, For sale is a TOX Pressotechnik press, type MBG 004.124. The machine has a pressing force of 40 kN, which corresponds to approximately 4 tons, and is suitable for industrial pressing, joining, assembly, riveting, embossing, and upsetting operations. Lrjdpfoznkvpsx Ab Aju A particular highlight is the current inspection: The machine is inspected and certified until [date]. Technical data: - Manufacturer: TOX Pressotechnik - Type: MBG 004.124 - Product type: Press / Insertion machine / Joining machine - Pressing force: 40 kN - Maximum air pressure: 5 bar - Total stroke: 200 mm - Working stroke: 80 mm - Year of manufacture: 2001 - Machine serial number: 210192.1 - Machine number / Electrical: 210193.1 - Rated voltage: 230 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Power: 0.2 kW - Rated current: 0.5 A - Fuse rating: 16 A - Protection class: IP65 - Standard: DIN EN 60204 - Circuit diagram: STE 325-26 - Country of manufacture: Germany - Inspection valid until: [date] Condition: used The press operates with a total stroke of 200 mm. The actual working stroke is 80 mm, providing a maximum pressing force of 40 kN. The machine is suitable, for example, for inserting bushings, bearings, and bolts, as well as for assembly, riveting, embossing, upsetting, and joining operations. The exact condition and scope of supply can be seen in the images. You can find more presses and industrial machines – new and used – in our shop! "Everything from one source: We will be happy to offer you suitable financing for your project." PD

Condition: good (used), Year of construction: 2005, Length: 2300 mm, unlimited as it is open on the sides. 4 stations for drilling, inserting dowels, and applying adhesive. Equipped with a new adhesive nozzle. Ljdpfezzrdzjx Ab Asru

Condition: ready for operation (used), Year of construction: 2006, working width: 900 mm, Deburring machine manufactured in 2006. This TIMESAVERS 41-SERIE-900-WW features a working width of 900 mm and a maximum grinding height of 60 mm. It includes an abrasive belt dimension of 1900 × 930 mm and a rotating disc diameter of 1220 mm. If you are looking to get high-quality deburring capabilities, consider the TIMESAVERS 41-SERIE-900-WW machine we have for sale. Contact us for further details. • Abrasive belt dimensions: 1900 × 930 mm • Rotating disc diameter: 1220 mm Lodozznkqjpfx Ab Aeru • Max. grinding height: 60 mm • Table opening: 0–80 mm • Height adjustment range: 0–80 mm • Working speed: 10–22 m/s • Voltage: 400 V • Frequency: 50 Hz • Power: 36 kW

Condition: reconditioned (used), Year of construction: 2009, functionality: fully functional, We have a Buhrs - W+D BB700 16K servo envelope inserting system available. The condition of this machine is very good and has BSC 3.0 software installed. BSC 3.0 is one of the latest software platforms which manufacturer W+D has to offer. Other feeders and camera's optional possible! Turnover module also available optional. Year of built: 2009 Configuration: - 8 station base - 5x RF2 rotary feeder - 1x HF2 vacuum friction feeder - 1x AS2 shuttle feeder - Divert bin - Autoloader envelope station - Conveyor Envelope formats: - min. 105 × 162 mm C6/DL - max. 250 × 353 mm B4 Product formats: Lrjdjzv Tl Aspfx Ab Asu - min. 80 × 105 mm A6 - max. 229 × 324 mm C4 Product thickness: - 3 mm for rotary feeder - 10 mm for shuttle feeder - 15 mm for vacuum/friction feeder - 70 gsm 16,000 cycles per hour

Condition: used, Year of construction: 1998, grinding wheel diameter: 900 mm, Double-disc grinding machine – vertical Manufacturer: DISKUS Lrjdpfxexuv Uds Ab Aeu Type: DDW 900 IV CRV- CNC Year of manufacture: 1998 Control system: Siemens Sinumerik Technical data: - Grinding disc diameter: 900 mm - Grinding disc width: 20 – 80 mm 2 machines are available. In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if noted in the additional information. Subject to technical changes, errors, and prior sale.