Used Okoma Uf 1S Und Uf 2 Eg for sale (84,140)

Condition: good (used), Year of construction: 2012, Industrial robot Manufacturer: Kuka Gkodpstukiqjfx Ak Ueb Type: KR16-2-F Foundry Year of manufacture: 2012 Operating hours: approx. 11,000 hours Reach: 1611 mm Weight: 235 kg Payload: 16 kg Kuka controller KRC2ed05 Year of manufacture: 2009 Weight: 207 kg Processor: 2 GHz Operating system: WinXP Software version: V5.6.11 Kuka teach pendant KCP2ed05 Kuka connection cables 7m/15m ä10926

Condition: used, machine/vehicle number: 8544, Coil winding machine Blume und Redecker AM 100 Winding diameter: 200 mm, laying width: 600 mm Maximum wire diameter: 2 mm Gkjdpoylzghofx Ak Usb

Year of construction: 2016, condition: used, Equipment: 1) Cartes GE362VR finishing machine, infeed unit: servo-driven pneumatic 76mm clamping mandrel/expansion shaft, accommodates rolls up to 800mm in diameter or 150kg, automatic electronic web tension and roll diameter control with photocell, automatic stop function at end of material, electronic web guide with ultrasonic sensor for precise web control, splicing table with pneumatic clamps, adhesive tape dispenser, photocell for detecting print marks and any contrast points on pre-printed material, complete servo motor control of the material web, Vetaphone corona treatment system, flexo coating unit, fully rotary operation, equipped with laminating module, rotary flexo coating unit, UV dryer, specification in the source document: 24W/cm / 160W/cm, for laminating, printing or full-surface overcoating/coating, 2) Semi-rotary die-cutting unit with Image Distortion System (IDS) and Air Gap System (AGS): die-cutting system, magnetic cylinder, air-gap adjustment system, semi-rotary and fully rotary gearless die-cutting system, printing plate/die plate thickness range: 0.2-2mm, Image Distortion System (IDS), 3) Air Gap System (AGS), 4) outfeed unit, web control, complete servo motor control of the material web, slitting unit, 10 pivoting razor blades with lateral adjustment, additionally 8 knife/counter-knife cutting groups for longitudinal slitting, rewinding shafts, first rewinding shaft, independent servo-driven pneumatic 76mm expansion shaft, for rolls up to 800mm or 150kg, automatic web tension control, direction of rotation: clockwise/counterclockwise, with documentation. An on-site inspection is possible. Gedpfxezy Rv To Ak Ujkb

Condition: ready for operation (used), Siemens 1FT5072-0AC01-2 - Z SN: YFTN36396001001, professionally fully checked and tested, good condition, 100% functional, scope of delivery as per photos Gkedperxnbgefx Ak Ueb

Condition: used, length / mm width / mm Godsy S Dzpjpfx Ak Uokb

Condition: used, Year of construction: 1976, Machine type: Universal milling machine Manufacturer: SHW Model: UF21 Year of manufacture: 1976 Control type: NC Country of origin: Germany X-axis travel: 1050 mm Y-axis travel: 500 mm Z-axis travel: 500 mm Spindle taper ISO: SK40 Spindle head swivel right-left: 90° Quill travel: 180 mm Spindle speed range: 36–1800 rpm / 18 steps Feed rate X+Z: 0.3–1800 mm/min Feed rate Y: 0.3–900 mm/min Rapid traverse X/Z: 1800 mm/min / Y: 900 mm/min Gjdpexwnm Defx Ak Uskb Table size: 1200 x 550 mm Total power requirement: approx. 10 kW Estimated weight: 4400 kg Machine dimensions (L x W x H): approx. 3.1 x 2.5 x 2.2 m Spindle motor power: 6.8 kW

Year of construction: 2002, operating hours: 1,378 h, condition: good (used), Brand: Berstorff Type: ZE 25 compounding line Serial no.: 90200771-0010/2002 Year of manufacturing: 2002 Operating hours: 1,378 Gsdpfx Akezuk Tne Uskb Screw diameter: 25 mm Screw L/D: 44 Dimensions (LxWxH): 4,500 x 1,200 x 2,200 mm Weight: 1,350 kg Line configuration: – 1x gravimetric powder feeding system from Brabender – 1x vent port for degassing, including vacuum pump – Filament die with 6 cavities – Cooling roll with tempering unit – Pelletizer with adjustable speed – Central control cabinet Other: All documentation available in German The machine was originally used for biomaterials

Condition: good (used), Year of construction: 2008, functionality: fully functional, tank capacity: 24,000 l, total length: 6,060 mm, total width: 2,440 mm, total height: 2,590 mm, overall weight: 36,000 kg, wall material: stainless steel, number of chambers: 1, manhole diameter: 500 mm, operating temperature: 150 °C, operating pressure: 4 bar, pressure (max.): 6 bar, Tank container made of V4A stainless steel with a top manhole (access opening) with a diameter of 50 cm. Bottom outlet 3 inch BSP, which corresponds to 7.5 cm. Top walkways. The tank is insulated, cleaned, and leak-proof on all sides (pressure-tested). Location: Rotterdam. Transport quote available on request. All information provided without guarantee; subject to errors and prior sale. Gksdpfxoywd Tvo Ak Ujb

Condition: good (used), Year of construction: 1977, functionality: fully functional, machine/vehicle number: 090977 / 280777, Oma brand woodturning lathe sanding machine, model 120/A, serial number 090977, used. Gkodpfx Aezkqxvok Ujb Oma brand woodturning lathe sanding machine, model Cosbo 120, serial number 280777, used.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 300 h, clamping force: 400 kN, overall weight: 2,180 kg, controller manufacturer: ARBURG, controller model: SELOGICA direct, Hydraulic injection moulding machine manufactured in 2019. This Arburg ALLROUNDER 270 C 400-100 features a clamping force of 400 kN and an opening stroke of 350 mm. It has a maximum injection pressure of 2500 bar and a shot weight of up to 29 g. If you are looking to get high-quality injection moulding capabilities, consider the Arburg ALLROUNDER 270 C 400-100 machine we have for sale. Contact us for further details. - Control System: SELOGICA direct- Clamping Force: 400 kN- Opening Force: 130 kN- Opening Stroke: max. 350 mm- Mold Mounting Height (min.): 200 mm- Platen Distance (max.): 550 mm- Distance Between Tie-Bars (H x V): 270 x 270 mm- Size of Mold Platens (H x V): max. 446 x 446 mm- Weight of Movable Mold Half: max. 180 kg- Ejector Force / Stroke: max. 30 kN / 125 mm- Dry Cycle Time (EUROMAP): 1.2 - 189 s-mm- Injection Unit Size: 100- Screw Diameter: 20 mm- Effective Screw Length (L/D): 25- Screw Stroke: max. 100 mm- Calculated Stroke Volume: max. 31 cm³- Shot Weight (PS): max. 29 g- Material Throughput (PS / PA6.6): max. 5.5 kg/h / 2.8 kg/h- Max. Injection Pressure: 2500 bar- Max. Holding Pressure: 2500 bar- Max. Injection Rate: 64 cm³/s- Max. Screw Torque: 120 Nm- Nozzle Contact Force / Retraction Stroke: max. 50 kN / 180 mm- Heating Capacity: 4.95 kW- Hopper Capacity: 1.8 L- Operating Voltage: 400 V 3~ 50 Hz- Control Voltage: 230 V ~ 50 Hz / 24 V DC- Motor / Heating Rated Current: 42 A / 11 A- Total Rated Current: 53 A- Total Connected Load: 29 kW- Pump Motor Power: 11 kW- Hydraulic Oil Capacity: 165 L- Net Machine Weight: 2,180 kg Gksdszvm Azspfx Ak Ueb

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: 173340, clamping force: 2,000 kN, screw diameter: 50 mm, clearance between the columns: 520 mm, plate length: 715 mm, plate height: 715 mm, total length: 5,360 mm, total width: 1,800 mm, total height: 2,200 mm, overall weight: 6,900 kg, Equipment: documentation/manual, ARBURG ALLROUNDER 520 C 2000-675, hydraulic injection molding machine for plastics, year of manufacture 1998. The machine has a clamping force of 2,000 kN (200 tons) and an injection unit with a 50 mm diameter screw. Technical data: Manufacturer: ARBURG Model: ALLROUNDER 520 C 2000-675 Year of manufacture: 1998 Clamping force: 2,000 kN / 200 tons Injection unit: 675 Screw diameter: 50 mm Distance between columns: 520 × 520 mm Platen size: approximately 715 × 715 mm Opening stroke: approximately 650 mm Control: SELOGICA Condition: The machine was dismantled in perfect working order and is sold in its current condition. Operating hours are not available. Gkjdpfxszw Hnyo Ak Uob The machine is available for viewing/inspection by appointment. Sale includes the injection molding machine only. The Cartesian robot and other components of the cell can be purchased separately.

Year of construction: 1981, condition: ready for operation (used), Travel X/Y/Z: 495mm/205mm/355mm, table clamping surface: 1060mm, spindle bore: 46mm, speed: 2240rpm, machine dimensions X/Y/Z: approx. 4300mm/2100mm/1750mm, weight: approx. 1900kg. Only with counter bearing for arbor mandrels, key, and hobbing arbors. The machine shows bearing noise and play on the X-axis. Documentation available. An on-site inspection is possible. Gkjdpfjw Edptex Ak Uob

Condition: used, Year of construction: 2004, operating hours: 6,641 h, functionality: unexamined, machine/vehicle number: 310904, The machine has been carefully disassembled. It consists of 4 main parts: 1. Tabletop or table 2. Right-hand support 3. Left-hand support 4. Beam or bridge Additional parts: 1. Electrical cabinet 2. Water tank with pump Assistance with loading is possible. Delivery by a freight forwarder can be arranged. Tools, angle gears, vacuum suction cups, etc., can be purchased separately. Further details available upon request. Gedpfxoym Dxio Ak Ujkb

Condition: good (used), Year of construction: 2004, On request and for an additional charge, loading and transport (throughout Europe) can be arranged. All prices include VAT. Viewing is possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange is possible! Godpfoxirqqjx Ak Uokb Phone: Mobile: (also via WhatsApp) Web: Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For further information or contact options, please visit our website.

Condition: good (used), Year of construction: 2006, I sell the widebelt sanding machine Biesse Regal 520 - 1350, year 2006. Configuration: Gsdpfx Aezkmdhjk Uokb 1pc. electronic segmented pad 1pc. electronic segmented pad Working width 1350mm Pressure rollers for short elements. Air-blow on both units. Total weight 3050kg Condition very good. Available immediately.

Condition: new, Year of construction: 2025, RST-LC1500 Advantages of the 2D Ultra-Wide Laser Cleaning Machine: A: 600–800 mm wide cleaning with ultra-wide coverage. B: Equipped with imported high-performance SOC controller. C: Various selectable 2D cleaning patterns; 14 languages available. D: Complies with European safety standards; triple safety mechanisms. E: Equipped with multiple parameter databases tailored to various operating conditions. F: High-protection safety design. G: Easy maintenance and long-term stable operation. Machine Technical Specifications: Power supply 220V 50Hz/60Hz Output power ≤5.5 kW Operating temperature 10–40°C Cleaning area Cleaning width ≤ 800 mm Cooling method Air cooled Focal length 500/800/1000 mm Weight of laser cleaning head 900 g Laser safety class Class 4 Machine dimensions 640 × 330 × 620 mm Machine weight 46 kg Packaging dimensions 850 × 650 × 900 mm Package weight 88 kg Laser Generator Specifications: Parameter name Specification Laser generator model MFSC-1500M Power adjustment range 10%–100% Laser wavelength 1080 nm Modulation frequency 1–5000 Hz Output power instability ±1.5% Optical fiber cable length 10 m Machine Configuration: Component name Brand Description Machine body DPL Professional cleaning cabinet Laser generator MAX MFSC-1500M Laser head Hydraulic / Brand 2D Super Wide Angle Chiller system Bingyue 1500W-S Price: RST-LC 1500W (230V).....€9,500 Warranty: Two-year warranty on the laser source, One-year warranty on other machine components. No warranty on consumable parts. OPTION: TERMS AND CONDITIONS Gjdsw Ix Dpopfx Ak Uekb Training and Installation: 1 day €600 (incl. arrival and departure) Transport Costs: Air freight: €1,200 / Sea freight: €650 Delivery: 2–3 working weeks after payment receipt for air freight 5–6 weeks by sea freight Payment: 100% due upon order and before shipping (air cargo or by sea)

Condition: used, maximum load weight: 29,200 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 09/1997, next inspection (TÜV): 08/2023, Equipment: ABS, * ABS * Alloy wheels Godpfju I H D Rox Ak Uokb * Front landing gear * Steering axle * BPW ECO axles * 5-chamber tail lights ----Construction: cement silo trailer (for granular and dusty goods), capacity: 40,000 ltr, next external inspection 11/24, next internal inspection 11/25, max. permissible pressure 2.0 bar, permissible temperature min/max -40/+80 degrees, 4 sliding dome covers with pneumatic locking, 2 outlets lockable, 4 inch material line collected to the left----3rd axle steering axle Sale only to traders. FOR EXPORT ONLY THE NET PRICE IS TO BE PAYED !!!!! ALL INFORMATION IS WITHOUT GUARANTEE. EQUIPMENT + ACCESSORIES.The basis of all purchase contracts, invoices, pro forma invoices, orders and sales talks are our general terms and conditions (see legal notice).

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, cutting width (max.): 450 mm, working length: 16,000 mm, working width: 450 mm, Equipment: safety light barrier, A well-maintained Hundegger K2 cutting machine with a planer is offered for sale. The machine is fully functional and has been serviced several times a year by Hundegger. The machine is still in operation until the beginning of November and can then be dismantled by the buyer. =Equipment: = Machine type K2-5-450 - Wood length, feed and discharge max. 16m - Color RAL 5012 blue - Feed cross conveyor, 6 strands, horizontal, 2.2 m with flat belt chains - Extendable wood discharge - Undercarriage swivel miter saw - Universal milling cutter, 5-axis UFS (roller cutter, finger cutter, dovetail cutter) - Combination support for vertically operating tools (finger cutter, drilling unit 2.2kW) - Combination support for horizontally operating tools (drilling unit 2.2kW, drilling unit 2.2kW) - Marking device at the front - Discharge table, 6-arm - Beam turning station, hydraulic - Enhanced wood support surfaces (the vulnerable plastic coating has been replaced with maintenance-free stainless steel, chrome-plated tables, stainless steel rollers) - Extension roller conveyor, 10m with feed roller - Transfer cross conveyor, 7 strands, 3.5m with flat belt chain - Connection to planer HMD = Planer HMD - Fully automatic 4-sided planing and chamfering - Planer motors 7kW - Automatic thickness planer adjustment - Direct planer control - Planer machine directly integrated after the cutting machine = Other Gkjdpfozb I Iwjx Ak Uob - Inspection possible by appointment. - If the machine is being dismantled, it can of course also be inspected in the operating environment. - A new K2 with a planer and comparable equipment costs approximately 800,000 euros. - New spare parts in stock can be included at a favorable price. - The machine runs perfectly, however, no guarantee or liability is assumed for future damages. - Ideal machine for medium to large carpentry or sawmill operations. = Contact - Friedrich Hirsch GmbH - Schwaig 2, 3351 Weistrach, Lower Austria - Managing Director and Owner: Friedrich Hirsch - If you have any questions, please call us from Monday to Friday from 7:00 a.m. to 12:00 p.m. and from 1:00 p.m. to 5:00 p.m. or send an email at any time. - Unfortunately, I cannot provide a mobile phone number, as the advertisement would otherwise be blocked.

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, working width: 420 mm, Texturing and brush-sanding machine Manufacturer: Cosma Year of manufacture: 2021 Gkedpfjzzdwyex Ak Ujb Brush-sanding machine with 6 units for texturing and sanding of floorboards, profiled timber, and solid wood flooring of all kinds. The machine comes from a parquet manufacturing company. Working width: 420 mm Workpiece dimensions: Length: 700 mm - theoretically infinite Width: approx. 50 - 420 mm Height: approx. 9 - 90 mm Equipped with: 5x texturing units, electric height adjustment for each brush, mechanical height indicator, 3 kW motor each with a fixed speed of 1500 RPM for texturing 1x sanding unit, electric height adjustment for each brush, mechanical height indicator, Angled 0.55 kW motor with frequency control (infinitely variable speed) for sanding Workpiece transport via "High Grip" conveyor belt, 0.37 kW motor, frequency-controlled (infinitely adjustable, approx. 4 - 16 m/min.) Control panel at the infeed of the machine with: - Display and adjustment of the feed speed - On/off for each unit - Height adjustment of the units - Motor ampere display for the texturing units Machine with cabin/enclosure for the units Dust extraction connections: 6x 150 mm diameter Working height: 900 mm Electrical connection: 32 amps, 3-phase, 400 V + 0

Condition: good (used), Workpiece width: 1,200 mm Workpiece height: 500 mm Drill diameter: 8 - 40 mm Number of drilling spindles: 3 pcs. Spindle speed: 150 - 1,100 rpm Tool changer: 15 pcs Saw blade diameter: 1,430 mm Cutting speed: 8 - 30 m/min Total power requirement: 43 kW Machine weight approx.: 20 t Space requirement approx.: m Additional information Working range Angle steel: 80 × 65 × 10 mm to 250 × 250 × 28 mm U-steel: 80 × 45 mm to 400 × 110 mm Double-T beams: 80 × 46 mm to 600 × 220 mm Wide flange beams: 100 × 100 mm to 1,008 × 302 mm Special wide flange beams / welded T-beams: up to 1,200 × 500 mm Workpiece data Workpiece width max.: 1,200 mm Workpiece height max.: 500 mm Drilling unit Number of drilling spindles: 3 (1 vertical, 2 horizontal) Drill diameter: 8 - 40 mm Spindle speed: 150 - 1,100 rpm Drilling spindle feed: 0 - 500 mm/min Rapid traverse: 3,850 mm/min Rapid retract: 8,000 mm/min Positioning speed: 15,000 mm/min Automatic tool changer: 15 tool positions (3 × 5) Clamping system Horizontal clamping force: 25,000 N Vertical clamping force: 4 × 10,000 N Saw unit Saw blade diameter: 1,430 mm Saw blade type: HSS segment saw blade Saw blade dimension: 100 × 4 × 30 × 250 mm Cutting width: 9.5 mm Cutting speed: 8 - 30 m/min Saw feed: 0 - 400 mm/min Rapid retract: 2,000 mm/min Drives Drilling drives: 3 × 11.0 kW Saw motor: 18.5 kW Godpfx Aezzczkjk Uekb Positioning drives: 3 × 1.5 kW Hydraulic unit: 5.5 kW Hydraulic saw: 3.0 kW Vertical clamping cylinder: 1.5 kW Swiveling drive: 0.25 kW Hydraulic oil heater (option): 3.0 kW Total power Total connected power of drilling unit: 43.0 kW Installed total power of the complete drilling and sawing system: approx. 66 kW (incl. saw motor and auxiliary drives) Compressed air Compressed air connection: 6 - 8 bar Air consumption: 1,000 l/min Dimensions Drilling unit Dimensions (L × W × H): 6,650 × 1,300 × 3,730 mm Working height: 640 mm Weight: approx. 8,500 kg Saw Dimensions (L × W × H): 4,500 × 1,500 × 3,200 mm Working height: 640 mm Weight: approx. 10,980 kg Total weight approx. 19,500 kg (without accessories) Electrical data Operating voltage: 400 V / 50 Hz Control voltage: 24 V

Condition: ready for operation (used), Year of construction: 2004, operating hours: 615 h, spindle motor power: 22,000 W, spindle speed (max.): 5,000 rpm, travel distance X-axis: 580 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 1,045 mm, total height: 2,597 mm, total width: 2,060 mm, overall weight: 9,700 kg, controller manufacturer: MAZATROL, controller model: PC FUSION CNC 640MT Pro, product length (max.): 3,820 mm, number of axes: 5, This 5-axis Mazak INTEGREX 200 III S was manufactured in 2004. It features a maximum turning diameter of 660 mm and a maximum workpiece weight of 150 kg. The machine is equipped with a tool magazine capacity of 80 slots and a rapid traverse speed of 38 m/min on the X and Z axes. If you are looking to get high-quality turning and milling capabilities, consider the Mazak INTEGREX 200 III S turn-mill centre we have for sale. Contact us for further details. - Max. Swing Diameter: 660 mm- Max. Turning Diameter: 660 mm- Max. Turning Diameter over Slide: 500 - 660 mm- Max. Bar Working Diameter: 51 mm- Max. Workpiece Weight (incl. Chuck) - Chuck Workpiece: 100 kg- Max. Workpiece Weight (incl. Chuck) - Shaft Workpiece: 150 kg- Main Spindle Speed Range (Stepless): 35 - 5,000 rpm- Main Spindle Drive Power (30 min. rating / 100% continuous operation): 22 kW / 15 kW- Main Spindle Max. Torque: 349 Nm- Main Spindle Nose: A2-6"- Main Spindle Bore: Diameter 76 mm- Main Spindle Chuck Diameter: 210 mm- Main Spindle Indexing (C-Axis): 0.0001°- Second Spindle Drive Power (30 min. rating / 100% continuous operation): 18.5 kW / 15 kW- Second Spindle Speed Range: 35 - 5,000 rpm- Second Spindle Max. Torque: 326 Nm- Second Spindle Indexing (C-Axis): 0.0001°- Second Spindle Chuck Diameter: 210 mm- Tool Turret Design: Single spindle turret for stationary or driven tools- Driven Tools (IPM Motor) Drive Power (20% ED): 15 kW- Driven Tools Max. Torque: 120 Nm- Driven Tools Speed Range: 15 - 12,000 rpm- Tool Taper: MAZAK KM 63 quick-change system (for stationary tools)- Tool Magazine Type: Drum type- Tool Magazine Capacity: 80 slots (equipped for stationary and driven tools)- Tool Weight: max. 10 kg- Tool Diameter: max. 90 mm- Tool Diameter (with free adjacent slots): max. 125 mm- Tool Length: max. 300 mm- Tool Change Time (Tool-to-Tool step 1): approx. 1.3 s- Travel Y-Axis: +/- 80 mm- Travel W-Axis: 1050 mm- B-Axis Swivel Range: -30° to +195°- Rapid Traverse Speed X-Axis: 38 m/min- Rapid Traverse Speed Y-Axis: 26 m/min- Rapid Traverse Speed Z-Axis: 38 m/min- Rapid Traverse Speed W-Axis: 30 m/min- Rapid Traverse Speed C-Axis: 400 rpm- Feed Range X-Axis: 0 - 8,000 mm/min- Feed Range Z-Axis: 0 - 8,000 mm/min- Feed Range Y-Axis: 0 - 8,000 mm/min- Coolant Tank Capacity: 220 L- Pump Delivery Rate: approx. 20 l/min- Pump Pressure: approx. 5 bar- Pump Power: 635 W- Connected Load: 61.4 kVA- Operating Voltage: 400 V / 50 Hz- Pneumatic Pressure: 5 bar, 500 l/min- Total Operating Hours: 3,520 hours (Recorded on 2026/05/04)- Automatic Process Time: 1,581 hours- Automatic Cutting Time: 1,267 hours- Pure Cutting Time: 905 hours- Operating Time: 615 hours- Standard Accessories / Additional Equipment:- B-Axis (0.0001° positioning axis)- C-Axis (0.0001°)- Y-Axis- Spindle orientation on second spindle- Synchronization of main and second spindle- Hydraulic 3-jaw chuck diameter 210 mm, Type KITAGAWA B-208, including 1 set of soft jaws (Main Spindle)- Hydraulic 3-jaw chuck diameter 210 mm, Type KITAGAWA B-208, including 1 set of soft jaws (2nd Spindle)- Dual foot switch for opening/closing the chucks for main and 2nd spindle- Feedback of chuck status (open/closed) for main and 2nd spindle- Air blow-out device on chuck (Second Spindle)- Tool Setter (Tool Eye)- Front door interlock- Complete coolant system- Coolant and chip guard via fully enclosed work area- Work area lighting- Chip Conveyor System (Mayfran ConSep unit visible) Technical Specification Counter Spindle Yes Gedpfszr U Auox Ak Ujkb

Condition: good (used), Year of construction: 2000, Cast Clamping Angle Plates Manufacturer: Tos - STOLLE Year: approx. 2000 1x Clamping surface width: 1200 mm, height: 3000 mm, depth: 1200 mm, 12 slots: 20 mm Grid spacing: 250 mm, wall thickness: 75 mm, approx. weight: 3000 kg, price: €7,250 negotiable 1x Clamping surface width: 1300 mm, height: 2000 mm, depth: 1500 mm, wall thickness: 80 mm Approx. weight: 3000 kg, price: €5,250 negotiable 1x Clamping surface width: 680 mm, height: 800 mm, depth: 375 mm Grid spacing: 70 mm, slots for M16, approx. weight: 500 kg, price: €2,350 negotiable 1x Clamping surface width: 340 mm, height: 1000 mm, depth: 400 mm Grid spacing: 100 mm, slots for M16 thread, approx. weight: 500 kg, price: €2,150 negotiable Gsdpfx Aoy Ix Ngok Uokb

Condition: used, Year of construction: 2000, A machine for packaging containers such as bottles (beer, wine, beverages, oils) or cans into cardboard collective packaging. The containers are grouped and then wrapped with a cardboard blank and glued together to form a collective package. Gedpfx Aeywclwjk Ujkb Manufacturer: SOTEMAPACK Model: WRAP-AROUND Year of manufacture: 2000 Capacity: up to 720 packages/hour (12 packages/minute) Control system: S7-300 Original technical documentation included. Technical condition: used machine, in working order at the time of disconnection, condition as shown in the pictures.

Condition: excellent (used), Year of construction: 2003, ABB Robotics IRB6650 Foundry 200/2.75 S4C+ M2000 robot, Profibus Controller: S4C+ M2000 Number of axes: 6 Gsdpfx Ajzly I Ask Uskb Max. payload: 200 kg Max. working range: 2750 mm Year of manufacture: 2003 Scope of delivery: Robot, controller, cables, teach pendant, wiring diagrams, floppy disk drive for data backup. Used item – shows normal signs of wear. Further details, article numbers, and images available upon request. Two-week start-up guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with VAT shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the quantity, weight, and desired delivery conditions. Shipping costs to foreign countries on request – please provide country, city, and postal code. Freight costs on request – please provide delivery address.

Year of construction: 2010, condition: ready for operation (used), Three similar Arburg injection molding machines are available. 1) Arburg ALLROUNDER 570 A 2000-800, year of manufacture: 2010, clamping force: 2000kN, distance between tie bars: 570mm/570mm, pressure: 575bar, control system: Selogica direct 4.090, operating hours: 91917h, weight: approx. 9800kg. 2) Arburg ALLROUNDER 570 A 2000-800, year of manufacture: 2011, clamping force: 2000kN, distance between tie bars: 570mm/570mm, pressure: 575bar, control system: Selogica direct 4.090, operating hours: 82736h, weight: approx. 9800kg. 3) Arburg ALLROUNDER 570 A 2000-800, year of manufacture: 2011, clamping force: 2000kN, distance between tie bars: 570mm/570mm, pressure: 575bar, control system: Selogica direct 4.090, operating hours: 90722h, weight: approx. 9800kg. Documentation available. An on-site inspection is possible. Gkodpfjznx Hisx Ak Usb