Used Mizar Recycling Machinery | Zzs M1 - Zigzag Separator for sale (79,379)

Year of construction: 2025, condition: new, This robust professional cable stripping machine, type KM1, cuts electrical cables from 1 to 70 mm in diameter. The blades are hardened so when stripping reinforced ground cable they are not immediately blunted. There are 15 different cable entries. The cable is cut from 2 sides so the copper core comes out easily. You can also use it to strip rubber and flat cables. Technical data: Mains voltage: 230 v ~ 50 hz Power: 3000 watts with dual pulley drive. Hjdpfxsp I I U Dj Ag Uen Dimensions: 60 cm long, x 75 cm wide and 90 cm high Machine speed: 35 m/min Output: Depending on the cable 400 and 1200 kg/day Weight: 185 kg.

Condition: as good as new (ex-display), Year of construction: 2019, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 19101105, roller width: 1,100 mm, Equipment: full service history, type plate available, The SDFM-1100 roll-to-roll laminator is a multifunctional laminating machine. It is designed for cold and hot laminating. The paper is laminated on one side with the foil. Then the web is re-rolled onto the roll. For cold laminating, the foil is coated with a water-based glue and dried using a heating roller with a warm air drying system. The winding system sends the paper to the laminating section, where the paper is covered with the foil by heating and roller pressure. The rollers use a heated water circulation system with constant temperature control. The paper roll is held by pins, which are controlled by a pneumatic brake. The paper is unrolled to the leveler, which is equipped with automatic leveling of the paper web before laminating, which ensures even coverage of the web with foil. In the laminator, the non-adhesive film is coated with a water-based adhesive and then dried with a heating cylinder or the film already coated with adhesive is unrolled into the laminating cylinder. The laminating cylinder is heated using induction heaters. Under the laminating cylinder, the paper is joined to the film using temperature and pressure generated by the lower rubber roller, which presses the film with the paper against the laminating cylinder. The laminated web is wound onto a core on a shaft in the receiving section, after which it can be transported to subsequent production processes. Specification SDFM-1100 Maximum roll width 1100 mm Maximum roll diameter 1100 mm Paper weight 80 - 500 g/m2 Film thickness 10-50 microns Working speed 10 - 65 m/min Hjdpfx Aovy Aipjg Usn Electrical voltage 380V 50Hz Total power 78 kW Maximum power consumption 30 kW Total weight 8000 kg Machine dimensions 10130×2130×2960 mm

Year of construction: 2023, condition: new, functionality: fully functional, This machine, type KM13, cuts electrical cables from 20 to 120 mm in diameter. The different diameters are easily adjusted by turning the hand wheel up and down. The machine has a speed of 25 mtr/min. The dimensions are: length 600 mm, width 600 mm and height 1600 mm. The weight of this machine is about 200 kg. This machine is powered by a 380V-50HZ, 3KW electric motor with a gearbox cabinet. The cable is cut from 2 sides so the copper core falls out easily. Spare parts such as blades, drive, bearings etc can also be supplied. If required we can also perform maintenance on these machines A machine that is ready to use and easy to operate. Hodpoq E Ti Hsfx Ag Uen If you want to try it, please bring cable.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, controller model: Fagor 8055/FL, spindle speed (max.): 1,200 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 850 mm Travel range, Y-axis: 500 mm Travel range, Z-axis: 450 mm Spindle speed (max.): 1,200 rpm Spindle speed (min.): 30 rpm Table width: 530 mm Table length: 900 mm T-slots: 14 mm wide, spaced at 60 mm Table load capacity: max. 400 kg MACHINE DETAILS Control system: Fagor 8055/FL Input voltage: 380 V Input current: Three-phase Hedoy Tv Auepfx Ag Uen Connected power: 56 kW EQUIPMENT Documentation/Manual Various tool holders and tools

Condition: like new (used), functionality: fully functional, Year of construction: 2017, Motorized guillotine shear Manufacturer: HM, Model: JBS 2000 x 3mm Year of manufacture: 2017 Technical data Manufacturer: HM Model: JBS 2000/3.0 Year of manufacture: 2017 Usable length: 2025 mm Sheet thickness: 3.0 mm Shear angle: 2° Motor: 4 kW Dimensions: approx. L 2.65 x W 1.85 (plus 0.4m support arms) x H 1.40 m Weight: approx. 2 t Hjdszaawhepfx Ag Usn Equipment - Cutting line illumination with LED - Controlled back gauge 600 mm - Rear safety guard using a light curtain - Rubber-coated clamping beam - Self-lubricating guide rails - Angle stop - 2 x support arms - Operating manual - Small parts chute towards the front All information is subject to change without notice. A demonstration is possible at any time in our showroom.

Condition: used, Year of construction: 2003, machine/vehicle number: IntNr230445, branded CNC sliding head lathe Citizen L520-VII, year 2003 control, Cincom Mitsubishi Meldas, 7 axes (X1/Z1/Y1/C1/X2/Z2/C2, Bar Ø max. 20 mm, turning length max. 205 mm, Main spindle, max. speed 10,000 rpm, C-axis 0.001 degrees, Counter spindle, max. speed 10,000 rpm, C-axis 0.001 degrees, Tool holder for a total of 18 tools (linear tool holder, front attachment, rear machining), parts conveyor belt, fire extinguishing system chip conveyor, IEMCA BOSS 432r loading magazine Hsdpey U Hlcefx Ag Usn The machine can be inspected under power by appointment. Subject to changes and errors in the technical data and information as well as prior sale! used CNC-lathe Citizen L520-VII, year 2003 control, Cincom Mitsubishi Meldas, 7 axes (X1/Z1/Y1/C1/X2/Z2/C2, bar-Ø max. 20 mm, turning length max. 205 mm, main spindle, speed max. 10.000 rpm, C-axis 0,001 deg, counter spindle, speed max. 10.000 rpm, C-axis 0,001 degree, Tool holder f. total 18 tools (linear tool holder, front attachment, backworking), parts conveyor belt, fire extinguishing system chip conveyor, loading magazine IEMCA BOSS 432r The machine can be inspected under power by prior arrangement. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, Year of construction: 2004, machine/vehicle number: IntNr230440, Control system, manufactured by CINCOM MITSUBISHI Meldas 6 axes (X1/Z1/Y1/C1/X2/Z2), Bar Ø max. 16 mm, turning length max. 200 mm, Main spindle, speed max. 10,000 rpm, C-axis 0.001 degrees, Counter spindle Ø max. 16 mm, Counter spindle speed max. 10,000 rpm, incl. spindle indexing Tool holder for a total of 17 tools (linear tool holder, front attachment, rear machining), Parts conveyor belt Chip conveyor Fire extinguishing system Loading magazine IEMCA Genius 118/3200 Year of construction 2005 The machine can be inspected by appointment. Changes and errors in the technical data and information as well as prior sale reserved! Hsdpfx Agjy Ulh Nj Ujn control, make CINCOM MITSUBISHI Meldas 6 axes (X1/Z1/Y1/C1/X2/Z2), bar-Ø max. 16 mm, turning length max. 200 mm, main spindle, speed max. 10.000 rpm, C-axis 0,001 degree, counter spindle Ø max. 16 mm, counter spindle speed max. 10,000 rpm, incl. spindle indexing Tool holder for a total of 17 tools (linear tool holder, front attachment, backworking), parts conveyor belt Chip conveyor Fire extinguishing system loading magazine IEMCA Genius 118/3200 year of construction 2005 The machine can be inspected by appointment. Changes and errors in the technical data and information and subject to prior sale!

Condition: excellent (used), Year of construction: 2019, Wanrooe Grinding Line Year 2019 Consisting of a single shaft crusher, a conveyor elevator of approximately 4 meters with suction installation Hsdpjwqtuiefx Ag Usn

Condition: ready for operation (used), Year of construction: 2017, Suitable for: screw caps, drop inserts, press-on caps, flip-top caps, cup-to-cup closures, pipettes, brushes, spray pumps, triggers, rubber stoppers, crimp caps, ROPP caps and other closure types, equipment: mechanical rotary indexing table, pneumatic cap feeders, closing station for 1 closure type, extraction connection, IBC including drip tray, continuously adjustable transition from the discharge arm, machine enclosure: stainless steel 1.4301 (AISI 304), max. output depending on bottle, fill level and closure type: 60 bottles/min, compressed air connection filtered, oil-free: 6bar, connected load: 1.5kW, power supply: 3x 400V, connection area height: 792mm, cable routing: 317mm, overall length: 4200mm, with documentation. An on-site inspection is possible. Hsdozadklspfx Ag Uon

Condition: good (used), fuel type: electric, JUST IN: 4 units Scooter / mobility scooter in good working condition; Year of manufacture: 2009; max speed 15 km/h. Watch the video on YouTube. Hedpfx Ajyay Umog Uon

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 380 V, total length: 3,000 mm, total width: 1,500 mm, laser power: 1,500 W, Equipment: documentation/manual, WatMachinery OT3015F is a modern fiber laser cutting machine with a 1500 × 3000 mm working area, equipped with high-quality industrial components and an automatic Raytools BS03K cutting head. The machine is designed for precise and efficient cutting of carbon steel, stainless steel, aluminum, and brass. (Photo only for REF.) Available laser source powers: 1500 W / 2000 W / 3000 W (Raycus). Key Advantages - Heavy-duty construction – high rigidity, stability, and vibration resistance - 4th generation aerospace-grade aluminum gantry – low weight, rapid acceleration, and high motion accuracy - Raytools BS03K cutting head – automatic focusing, optics protection, high cutting speed - Raycus laser source – reliability, long service life, and high energy efficiency - Raytools XC3000S control system – intuitive operation, file editing, remote control capability - INOVANCE servo drives – high precision, fast dynamic response, stable operation Rebi N Auewiwtyofcen - Precision drive system – LEITESEN racks (dual drive) + PEK Italia linear guides - SMC pneumatic system (Japan) – reliability and longevity - Schneider (France) electrical components – high safety standards - S&A industrial chiller – dual-circuit cooling, alarms and machine protection - Fume extraction system – efficient smoke removal and improved working conditions - Complete industrial configuration – machine ready for operation immediately after installation Technical Specifications Model: OT3015F Working area: 3000 × 1500 mm Laser source: Raycus Fiber (1500–3000 W) Wavelength: 1070–1080 nm Hedpowiwtyjfx Ag Usn Interfaces: USB, RJ45 X Axis - Max speed: 80 m/min - Travel: 3000 mm - Positioning accuracy: ±0.05 mm/m - Repeatability: ±0.05 mm Y Axis - Max speed: 80 m/min - Travel: 1500 mm - Positioning accuracy: ±0.05 mm/m - Repeatability: ±0.05 mm Z Axis - Travel: 100 mm Additional Parameters - Maximum acceleration: 0.8 G - Power supply: 380 V / 50 Hz - Operating mode: 24/7 continuous operation - Machine weight: approx. 1500 kg - Dimensions: 4500 × 2300 × 1500 mm Applications: ✅ Kitchen equipment industry ✅ Bathroom equipment industry ✅ Automotive ✅ Advertising and metalworking Why choose us? JET STAR INTERNATIONAL offers comprehensive solutions for laser cutting machinery, providing service, training, and spare parts availability throughout Europe. Our machines combine quality with affordability, delivering an excellent cost-to-performance ratio. 🗂️ Available to order 📞 Contact us for individual offers and delivery terms! 🌍 Support available in Polish, English, and German.

Condition: refurbished (used), functionality: fully functional, JMC 200 B Immediat delivery from our possible. Fully serviced. New condition Hjdpfoin N Tdsx Ag Uon McIntyre’s wide experience in hydraulic equipment manufacture has enabled us to build an 8” shear with a staggering cutting force. Although equipped with only an 8” blade, the high shear force and wide tip to tip opening on the McIntyre 200B means that it can deal efficiently with a whole range of non- ferrous cleaning and sizing operations - in particular larger diameter electric cables and valves. In most cases - if your metal will fit into the jaw of the 200B, then this machine will cut it.

Condition: new, Year of construction: 2026, functionality: fully functional, 600 HD available immediately Serialnumber 965 Special price from our stock 06188 Landsberg, Germany The 600HD alligator shear is a fast and strong metal cutting shear with an extended hold down clamp, making it ideal for every cutting and cleaning task whether cable, plastic sections or window frames. Its cutting capacity is up to 63mm, 2″ inch mild steel round bar. The 600HD alligator shear is probably best known for dealing with car radiators. It was designed and built following requests from customers who were looking for a shear with a longer blade to cut larger items such as car radiators which it cuts through in one pass. The automatic hold down clamp holds material in place during the cutting cycle and prevents kick back which speeds up processing and improves operator safety. As with all McIntyre shears, opening and closing the jaws is controlled from a moveable foot pedal. As soon as the foot pedal is released, the cutting blades return to the open position. However, a continuous cutting action can be achieved by keeping foot pressure on the pedal. The 600HD can be supplied with an electric motor or with a 2-cylinder diesel engine. Hedpfx Agjib Ircj Uon

Condition: excellent (used), Year of construction: 2010, operating hours: 2,125 h, functionality: fully functional, MG Recycling – Copper Cable Granulation Line Manufacturer: MG Recycling Type: Matrix400 Complete cable granulation line Condition: Very good – In perfect working order Availability: Immediate Technical description: Cable granulation line including: • Pre-shredder, completely overhauled recently o All rotor bearings are new o Gearbox bearings are new • Conveyor with magnetic rollers for scrap separation • Metering hopper • Feeding conveyor • Blade mill with 3 / 4 / 5 mm sizing screens • Separation by cyclone and zig-zag separator Hjdpjx It N Usfx Ag Usn • Finishing turbo • Density separation table • Dust extraction with bag filter Spare parts: • Pre-shredder: 1 set of knives + counter knives • Blade mill: 3 sets of blades and counter blades Capacity: ≈ 200 kg/h of finished product Application: Processing and recycling of copper cables Price: €95,000 (Complete processing line) Spare parts: €20,000 Additional information: • Photos and further information available upon request 📩 Contact us for more information.

Condition: good (used), Year of construction: 2013, operating hours: 2,064 h, empty load weight: 151 kg, mileage: 2,064 km, JUST IN: 4 units – Scooter / mobility scooter in good working condition. 2,064 hours on the meter. Year of manufacture: 2013. Max speed: 15 km/h. Hsdpfx Ajy R Akgog Uon

Condition: good (used), JUST IN: 4 PIECES  Scooter / mobility scooter, in good working condition Hsdjy R Akajpfx Ag Uen

Condition: good (used), Year of construction: 2013, operating hours: 1,915 h, empty load weight: 151 kg, mileage: 1,915 km, JUST IN: 4 units of scooter / mobility scooter in good working condition. Year of manufacture: 2013. Operating hours: 1,915 h. Maximum speed: 15 km/h. Hjdpfx Agey R Ai As Ujn

Condition: good (used), Overall dimensions: 1130 x 3350 x 1050 mm Output : 125 mm (d) Input: 125 mm (d) Hjdpfx Agjnt Uc Ro Ujn We recommend our vacuum pump 3289 for it. It has a filter and can be cleaned.

Year of construction: 2026, condition: new, High capacity semi-finished coil slitting line available with fast delivery and turnkey configuration. Bosporas Machinery is a manufacturer of coil processing lines, roll forming lines and press feeding systems, delivering high-performance and customized industrial solutions worldwide. Hsdpfx Asyzbzrjg Usn FAST DELIVERY ADVANTAGE Semi-finished machine with accelerated delivery possibility Main production stages already completed Delivery within approximately 75 working days Much shorter lead time compared to new production Special opportunity offer This coil slitting line is currently in semi-finished production status, offering an important delivery advantage for companies looking for faster commissioning and reduced lead times. Since critical manufacturing processes and major components are already prepared, the line can be completed and delivered significantly faster compared to a newly manufactured machine. The system is designed for high-capacity production and demanding industrial applications. It ensures stable operation, high slitting precision and reliable performance even under continuous heavy-duty working conditions. TECHNICAL SPECIFICATIONS Material Thickness: 0.3 – 3 mm Coil Width: up to 1500 mm Coil Weight: up to 20 Ton Slitting Speed: up to 40 m/min Slitting Accuracy: ±0.1 mm LINE COMPONENTS Hydraulic decoiler (20 Ton capacity) Hydraulic coil loading car Infeed system with straightener unit Slitting head with precision knife adjustment Scrap winding system Tension unit and separator system Hydraulic recoiler Exit system and automation ENGINEERING FEATURES High precision slitting performance Servo-supported and stable feeding system Robust slitting head with gearbox transmission Adjustable knife system for different slit widths Heavy-duty structure for industrial production Advanced automation system (HMI controlled) OPERATIONAL ADVANTAGES Faster delivery compared to newly manufactured lines Reduced investment waiting time Reliable and stable production Suitable for various materials (steel, aluminum, etc.) Competitive lead time advantage 24/7 after sales support APPLICATION AREAS Steel service centers Coil processing facilities Sheet metal manufacturers Automotive and construction industries

Condition: new, functionality: fully functional, power: 300 kW (407.89 HP), overall weight: 65,000 kg, tire size: 6*2, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, axle configuration: 3 axles, emission class: euro3, Year of construction: 2026, machine/vehicle number: V9638J96, Equipment: all wheel drive, hydraulics, onboard computer, Sand and Gravel Production Plant | MINGYUAN Heavy Industrial Equipment A sand and gravel production plant is an integrated system designed for producing high-quality construction aggregates, including sand, gravel, crushed stone, and artificial sand. MINGYUAN provides complete aggregate crushing and screening solutions for quarries, mining, construction, and infrastructure projects, ensuring efficient material processing and consistent output. General Introduction The MINGYUAN sand and gravel production line combines advanced crushing, screening, washing, and conveying equipment to process raw materials such as limestone, granite, basalt, river stone, and quartz into various sizes of construction sand and gravel aggregates. The plant typically includes jaw crushers, impact crushers, cone crushers, vibrating screens, sand washers, belt conveyors, and dust collectors, forming a complete and automated production system. It is widely used in road construction, concrete batching plants, building materials, and hydropower projects. Capacity range: 30–1000 tons per hour (customizable) Feed size: ≤800 mm depending on crusher type Output size: 0–5 mm (sand), 5–10 mm, 10–20 mm, 20–40 mm (gravel) Main equipment: Jaw crusher (PE/PEX series), cone crusher, impact crusher, VSI sand maker, vibrating feeder, vibrating screen, sand washing machine, belt conveyor, and control system Power configuration: Electric or diesel-driven options available Automation: PLC control with real-time monitoring and adjustable output ratio MINGYUAN Heavy Industrial Equipment Co., Ltd. provides complete sand and gravel production solutions with reliable performance, competitive price, and professional after-sales service for global customers in the mining, construction, and cement industries. 2. Crushing and Screening: - The extracted raw materials often need to go through crushing and screening processes to reduce their size and separate them into different grades. - Crushers break down large rocks into smaller pieces, and screens sort the particles based on size. 3. Washing: - Washing is a common process to remove impurities such as clay, silt, and dust from the raw materials. This is particularly important for sand and gravel used in construction. 4. Grading and Sorting: - After washing, the materials may go through grading and sorting processes to separate them into different sizes and qualities. 5. Storage and Stockpiling: - Processed materials are often stored in stockpiles for further use. Adequate storage facilities are necessary to manage different grades of materials. 6. Conveying and Transportation: - Conveyor systems are used to transport materials between different stages of the production process. Transportation methods, such as trucks or conveyor belts, are used to move the final products to distribution points. Keywords Hedpfjq Nia Ijx Ag Ujn Sand production line, gravel production plant, aggregate crushing plant, stone crusher, sand making machine, sand washer, vibrating screen, jaw crusher, cone crusher, impact crusher, VSI crusher, quarry equipment, mining machinery, construction aggregates, artificial sand, crushed stone, river gravel, limestone crusher, basalt crusher, granite crusher, sand washing plant, screening plant, conveyor system, MINGYUAN sand plant, aggregate processing equipment, stone crushing line, sand and gravel washing system, high-efficiency crusher, environmental sand plant, aggregate production line manufacturer.

Condition: excellent (used), Year of construction: 2006, Used high-performance roll garbage bag manufacturing machine for sale. Includes: Roll lifter, longitudinal welder, folding unit, bottom welder, and labelling unit. The machine is in perfect operational condition and can be viewed in production. For sale with factory support and spare parts due to underutilization. Technical Specifications: - Welding width: 700 mm - Maximum bag length: 2000 mm - Minimum bag length: 380 mm - Film speed: 120 m/min - Drive: Servo - Number of tracks: 2 Additional Specifications: - Heavy-duty, automatic 2-track roll garbage bag manufacturing machine Hodpeykz Ebofx Ag Uen - Film thickness: - LD/LLDPE: 0.012–0.060 mm (single layer) - HDPE: 0.008–0.015 mm (single layer) - Bag width: 300–700 mm - Line speed: 100–165 m/min (depending on material, thickness, and film quality) - Finished roll size: roll width 200–300 mm; roll diameter up to 130 mm Single-line labelling unit: - Label width: 70–200 mm (1 line) - Label length: 180–350 mm - Label roll diameter: max. 250 mm Year of manufacture: April 2006 Components: 1. TAI-1300C Lifting unwinder 2. SSB-1300A Slitting knife and longitudinal welding unit 3. TA-800C1 Bag making & welding machine 4. TAF-400-2N-M 2-lane folding machine 5. TAD-700 Four-axis spindle winder Other information: - Warranty: No warranty - Current status: In production - Availability: Immediate - Power requirement: 20 kW - Price: EUR 50,000

Condition: like new (used), Year of construction: 2022, functionality: unexamined, machine/vehicle number: YF-240, type of input current: AC, Equipment: documentation/manual, In 2022 we purchased a new line, but the business direction changed and the line was never unpacked from the containers. The line is stored in 40HQ*3pcs container and in one 20GP container. Production capacity:220-300kg/hour WPC production line is applied to produce wood plastic composite products, like WPC decking, WPC door frames, WPC skirting and so on. by changing screw barrel and molds, it can produce both PE PP type WPC products and PVC type WPC products. features of wpc production line: - adopts double step production, first compounding & granulating, then extrusion - adopts bimetallic screw barrel, high hardness, more wearable - adopts parallel twin screw extruder for compounding & pelletizing, good exhausting effect, better plasticizing effect Hsdpfx Aexb R Aisg Uon Please view all the technical specification in attachments.

Condition: new, functionality: fully functional, power: 210 kW (285.52 HP), fuel type: electric, color: silver, overall weight: 27,000 kg, empty load weight: 27,000 kg, operation weight: 36,000 kg, maximum load weight: 50,000 kg, tire size: 6*2, tire condition: 100 %, axle configuration: 3 axles, Year of construction: 2026, machine/vehicle number: MYM-J57C90, Equipment: hydraulics, low noise, rubber tracks, Mobile Crusher: Smart C&D Waste Recycling Solution Turn Demolition Debris into Profit Construction and demolition waste accounts for 30-40% of global waste. Our mobile crushing solution processes C&D waste on-site, transforming costly debris into valuable recycled aggregates. Technical Specifications 900×1060 Mobile Jaw Crusher Crusher Unit: Jaw opening: 900mm × 1060mm Max feed size: 750mm Output size: 75-200mm (adjustable) Capacity: 80-180 TPH Power: 90-110 kW Vibrating Screen: 2-deck or 3-deck configuration Screen area: 3.6-4.8 m² Motor power: 15 kW Produces 3-4 aggregate sizes simultaneously Feeder: Belt width: 1000mm Variable speed: 0-25 m/min Power: 7.5 kW Hopper capacity: 5-8 m³ Overall: Dimensions: 12-14m (L) × 2.8-3.2m (W) × 3.8-4.2m (H) Weight: 38-45 tons Total power: 120-150 kW Fuel consumption: 25-35 L/hour (diesel option) What We Process ✓ Concrete (plain & reinforced) ✓ Asphalt pavement ✓ Bricks and masonry ✓ Tiles and ceramics ✓ Mixed demolition debris ✓ Road construction waste Complete Recycling Process 1. Feeding Large hopper (5-8 m³) receives mixed C&D waste up to 750mm 2. Primary Crushing 900×1060 jaw crusher reduces material to 75-200mm with 4-6:1 reduction ratio 3. Magnetic Separation Automatic removal of steel rebar (>95% recovery rate) 4. Screening Multi-deck screen produces multiple grades: 0-5mm (sand) 5-10mm 10-20mm 20-40mm 5. Dust Control Integrated water spray system (8-12 nozzles) achieves >90% dust suppression Key Features Mobility: Track-mounted: Self-propelled, 0.8-1.2 km/h Wheel-mounted: Highway transportable Setup time: 30-60 minutes 360° working radius Automation: PLC control system Remote operation (50m range) Real-time monitoring Automatic overload protection Performance: Concrete: 120-150 TPH Asphalt: 100-130 TPH Mixed waste: 80-120 TPH Screening efficiency: >95% Output Products Recycled Aggregates: 0-5mm: Concrete, mortar (15-20% output) 5-10mm: Asphalt mix, drainage (20-25%) 10-20mm: Concrete, road base (25-30%) 20-40mm: Sub-base, backfill (25-30%) Applications Building demolition Highway reconstruction Bridge dismantling Airport runway recycling Disaster debris management Urban renewal projects Service Package Included: Factory testing Installation supervision Operator training (3-5 days) 12-month warranty Lifetime technical support Spare parts availability Hedpfxeq Nf Tvs Ag Uon Get Started Transform C&D waste from cost to profit. Our 900×1060 mobile crusher delivers proven performance, exceptional ROI, and environmental sustainability. Contact us for: Detailed specifications Custom configurations Site assessment Equipment demonstration Competitive quotation Make waste work for you. Choose proven mobile crushing technology for sustainable C&D recycling.

Year of construction: 2015, condition: used, W and C Profile Production Line for Sale Designed for the production of road barriers, posts, and fastening elements. Fully equipped line suitable for continuous industrial manufacturing. The line consists of: - Two decoilers - Post production line - Parapet (guardrail) production line - Two presses for fastener manufacturing Technical specifications: Length: 17 m Width: 1 m Height: 1 m Motor power: 22 kW Weight: 18 t Year of manufacture: 2015 Manufacturer: Chengxing Machinery (China) Purpose and advantages: This W and C profile production line is designed for manufacturing various road safety components: detachable road barriers, support posts, and fastening parts. The equipment ensures a reliable, stable, and consistent production process. Hjdpfexhf R Isx Ag Ujn The machine is available for inspection. If you have any further questions, please do not hesitate to contact us.

Condition: like new (used), functionality: fully functional, Year of construction: 2020, operating hours: 230 h, SANY SY155W is a wheeled excavator / mobile dozer designed for construction, infrastructure and utility works. It is not typically just a demolition machine, but a versatile field and urban machine that is suitable for various work tasks when equipped with appropriate adapters (e.g. hydraulic breaker, crusher). Power source: Stage V DEUTZ TCD4.1 / Isuzu diesel engine, with approx. 115-120kW power. Hsdpsy It Tmjfx Ag Ujn Fuel and hydraulic system for efficient work and economical operation. Total operating weight approx. 13.5-15t. Standard bucket volume: ~0.6m³. Wheeled design — easy transportation and quick relocation between sites. Hydraulics and work tasks Quick-connect hydraulic system that allows the use of various adapters such as hydraulic breakers, breakers, graders or other tools. Powerful digging and lifting function – suitable for digging, loading, breaking and demolition with the right work tool.