Used Miyano Bne-51S for sale (879)

Condition: used, Year of construction: 1996, Used Machine Nsdpe Aa A I Sofx Ag Rjwn Features and Technical Specifications: - Automatic edge magazine for rolls up to 3 mm; manual feed for strips up to 13 mm - Trimming shears for up to 3 mm - Cartridge-type adhesive application system - 3-roller pressure unit - 2-motor trimming unit - Multifunction routing unit (flush, radius, chamfer) - Radius scraper - Corner copying unit - Surface scraper - Buffing unit - Edge banding thickness: 0.4–13 mm (with tool change) - PVC edges up to 3 mm - Edge banding height: max. 51 mm - Edge banding length: min. 200 mm - Edge banding overhang per side: max. 3 mm - Workpiece width: min. 60 mm - Workpiece length: min. 180 mm - Workpiece thickness: min./max. 6/45 mm - Feed rate: 11 m/min. - Dimensions: 4500 x 1020 x 1630 mm - Distance from wall: 400 mm New gluing station installed in 2015

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: W301002, Technical characteristics: Work Area # Maximum turning diameter: 270 mm # Maximum machining diameter: 215 mm # Maximum workpiece length: 265 mm # Distance between spindle noses: 1080 mm # X1/X2-axis travel: 195 mm / Rapid traverse in X: 12 m/min # Z1/Z2-axis travel: 265/780 mm / Rapid traverse in Z: 24 m/min # B-axis travel (right spindle): 850 mm / Rapid traverse in Z: 24 m/min Spindles # Spindle as per DIN 55026: Size A2-6 # Maximum speed: Left & Right 50–5000 rpm # Power at 100% duty cycle: Left 11 kW / Right 11 kW # Main spindle special feature: Optional dual command clamping cycle for 2-stage chuck clamping # Bar capacity: Left spindle 51 mm / Right spindle 51 mm Two Tool Turrets # Tool interface: BMT55 # Number of stations: 12-position disc turret Electrical Equipment # Operating voltage: 200/220VAC +10%/–15%, single-phase, 50/60 Hz # Connected load: 54 kVA (connection 61 VA) Dimensions # Machine dimensions (L×W×H): 3645 × 1875 × 1970 mm Nwedpfoxw Uh Iox Ag Ren # Weight: 10,800 kg Main Features and Capabilities: # Horizontal construction: Optimal chip evacuation and easy part handling # CNC control: Fanuc 6i-TT # Chip conveyor # Automation interface for gantry loader available # Main spindle fitted with Autoblock Chuck 265 TXS # Each turret equipped with 2 external tool holders # Documentation: Electronic not available / Hardcopy available Machine status: RUNNING/IN OPERATION

Condition: good (used), Year of construction: 2023, functionality: fully functional, Invent air blower ITB150-15 Characteristics: Nwedpfx Agjvyrxyj Rjn Power 120 kW Voltage 500 V Air flow rate 51 m3/min Pressure 40 – 150 kPa

Condition: used, Year of construction: 2015, turning diameter max. 240 mm turning length 470 mm control 840 D sl Operate 4.8 Celos greates pass round over bed 500 mm swing diameter over slide rest 290 mm centre distance 780 mm turning speed range - main spindle max. 6.000 min/-1 power capacity - main spindel 13 / 14 kW max. Torque 171,5 / 192 Nm inner draw tube diameter 52 mm C-Axis 0,001 ° spindle diameter in front bearing 100 mm spindle nose FL 140H5 Spindle speed range subspindle max. 6.000 min/-1 power capacity - Sub spindle 12,6 / 16,2 kW max. Torque 48 / 62 Nm inner draw tube diameter 37 mm C-Axis 0,001 ° spindle diameter in front bearing 90 mm spindle nose FL 140H5 number of toolpositions 12 pos. Number of driven toolspositions 12 pos. tool taper VDI 30 Spindle speed - driven tool stations max. 5.000 min -1 Nwjdpfxoz S Nyaj Ag Rjn power capacity - driven tool-stations 4,18 kW max. Torque 16 / 20 Nm y-axis 80 (+/- 40) mm x-axis 145 mm y-axis 80 (+/- 40) mm z-axis 520 mm z2-Axis 550 mm rapid traverse ( X / Y / Z ) 30 / 22,5 / 30 m/min Feed force ( X / Y / Z ) 4,5 / 4,5 / 7,5 kN total power requirement 30 kVA weight of the machine ca. 4,3 t dimensions of the machine ca. 7,0 x 3,0 x 2,2 m CNC - Turning- and MillingCenter DMG GILDEMEISTER - CTX alpha 500 V6 - Only approx. 11,139 spindle hours - External chuck flushing system for the main spindle - External chuck flushing system for the counter-spindle Coolant supply through the counter-spindle - Coolant spray gun - Bar machining package Workpiece unloading device with conveyor belt (left-hand side) for parts up to 51 mm in diameter and 185 mm in length, max. 3 kg Hydraulic hollow clamping system Draw tube inner diameter: max. 52 mm 4-color signal light Connection for bar feeder or bar loading magazine - Preparation for external handling Electrical robot interface (Profibus) Automatic work area door Chuck flushing system with coolant (main spindle)

Condition: used, Year of construction: 2015, turning diameter max. 500 mm turning length 800 mm control sl Operate 3G ShopTurn Siemens swing diameter 500 mm distance between spindles 1.020 mm turning speed range - main spindle max. 5.000 min/-1 power capacity - main spindel 25 / 34 kW max. Torque 280 / 380 Nm spindle head 170h5 spindle diameter in front bearing 130 mm spindle bore 87 mm C-Axis 0,001 ° tool taper HSK 63 A number of toolpositions 80 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 120 mm max. tool weight 12 kg max. tool length 300 mm Speed Milling Spindle max. 12.000 min/-1 power capacity - milling spindle 19 / 22 kW Torque 85 / 100 Nm tool taper HSK 63 A B-Axis +/- 110 ° x-axis -10 ... +490 mm y-axis +/- 100 mm z-axis 1: 845 mm z-axis 2: 600 mm z-axis 3: 800 mm Spindle speed range subspindle max. 6.000 min/-1 power capacity - Sub spindle 20 / 27 kW bar material dia. 51 mm spindle bore diameter 73 mm spindle diameter in front bearing 100 mm C-Axis 0,001 ° total power requirement 85 kVA weight of the machine ca. 10,0 t dimensions of the machine ca. 7,0 x 2,9 x 2,6 m CNC - Turning- and Millingcenter DMG MORI - CTX beta 800 TC V6 - 5-axis simultaneous machining - Main and counter-spindle - Swivel-type milling spindle - ShopTurn - Off-center turning and milling - Multi-thread cycle - Program state control - Tool sorting cycle - Easy Tool Monitor for Siemens control system - Chuck flushing system for main spindle - Chuck flushing system for counter-spindle - Differential pressure clamping - Coolant supply through the counter-spindle - Bar machining package for CTX beta (77 mm capacity) Workpiece the-take-off device (left side) Hydraulic hollow clamping system 4-color signal tower Interface for bar feeder or bar magazine - In-process workpiece measuring system (Renishaw) Nwedjz S Nygepfx Ag Ron - Safety window cleaning system - Coolant spray gun

Condition: good (used), Year of construction: 2014, Description: The machine is in good technical condition, and a test run is possible upon prior arrangement. It is more suitable for serial production; it also includes a feeder and an output belt for finished parts. It comes with accessories – 2 universal chucks, clamps, and holders. Parameter PUMA MX 1600 ST Nwodpfez S Hnhox Ag Rsn Max. machining / turning diameter: 330 mm Recommended turning diameter: 170 mm Max. machining length: 900 mm Diameter over bed: 680 mm Diameter over carriage: 630 mm Bar diameter: approx. 51 mm Standard chuck: 6" Main spindle – speed: 6,000 rpm Main spindle – power: 15 / 11 kW Max. torque of main spindle: approx. 208 Nm Spindle nose: A2-5 Tailstock – speed: 6,000 rpm Tailstock – power: 15 / 11 kW Tailstock – nose: A2-5 Milling spindle: 12,000 rpm Power of milling spindle: 9 kW Torque of milling spindle: approx. 49 Nm Y-axis: 170 mm (??85 mm) B-axis: ??120?? / range 240?? X1: 450 mm Z1: 935 mm X2: 165 mm Z2: 925 mm Tool magazine: 40 positions Max. tool Ø: 70 / 95 mm Max. tool length: 200 mm Tool change time: approx. 2.1 s Lower turret: 16 positions, BMT45 Driven tools of lower turret: 6,000 rpm Power of driven tools: 5.5 kW Control system: Fanuc 31i-A Weight: approx. 11,600 kg Dimensions: approx. 3,800 × 2,530 × 2,760 mm

Condition: used, Year of construction: 1986, grinding length 400 mm grinding width 210 mm workpiece height 300 mm grinding wheel width x diameter 250 x 15 x 51 mm turning speeds 1100-2800 U/min forward and return motion adjustable 0-3 m/min 350 x 200 mm total power requirement 2,1 kW weight of the machine ca. 1,8 t Nsdpfx Age Aa A Hbs Rewn dimensions of the machine ca. 2 x 1,5 x 1,8 m Surface grinding machine with: - Coolant system - Heidenhain digital readout

Condition: used, Year of construction: 1962, grinding length 450 mm grinding width 250 mm workpiece height 275 mm table surface area 760 x 200 mm distance spindle center to table max. 400 mm table speeds 0 - 30 m/min cross feed 0 - 60 mm/Hub rapid traverse cross 1,2 m/min grinding wheel size ø 250 x 30 x ø 51 mm grinding spindle speed 1400 / 2800 U/min total power requirement 4 kW weight of the machine ca. 1 t dimensions of machine L x W x H 1,55 x 1,23 x 1,80 m Accessories: magnetic plate 450 x 175 mm, grinding wheel with flange, wet grinding attachment Njdo Adalpspfx Ag Rswn

Condition: used, Year of construction: 1953, machine/vehicle number: 66/53, pressure:36 t throat:280 mm stroke:6 - 82 mm Nwjdpfx Agj Ad Sh Ne Rsn ram adjustment:51 - 13 mm no. of strokes:6-82 Hub/min table surface area:530 x 480 mm Hole in clamping plate:Ø 140 mm clamping plate thickness:70 mm ram surface:200 x 200 mm clamping plate:530 x 450 mm dimensions of the machine ca.:1,0 x 1,65 x 1,80 m flywheel machine with DITTMER type PSK 103/B built in 1978, additional clamping plate 530 x 450 mm (thickness 70 mm), manual central lubrication, height-adjustable table (+/- 180 mm)

Condition: used, mileage: 50,190 km, power: 18 kW (24.47 HP), first registration: 07/1951, fuel type: diesel, empty load weight: 1,630 kg, maximum load weight: 1,520 kg, overall weight: 3,150 kg, axle configuration: 4x4, color: green, driver cabin: day cab, gearing type: mechanical, number of seats: 2, Year of construction: 1951, Equipment: all wheel drive, cabin, Vehicle location: Bovenden, auxiliary drive Unimog 2010 / 401/51 Böhringer? Year of manufacture 1951? Extensively restored For sale is an exceptional Unimog 2010 / 401/51 Böhringer from 1951 – a genuine piece of German automotive and agricultural history. This historic Unimog impresses with its authentic character, excellent condition, and an extensive, professionally executed restoration. A special collector's item for lovers of classic Unimog models and historic commercial vehicles. Vehicle details - Manufacturer: Unimog / Böhringer - Model: 2010 / 401/51 - Year of manufacture: 1951 - Exterior color: Green - Interior: Black leather seats - Equipment: Auxiliary drive for PTO operation at the front and rear - Origin: Swiss import - Customs status: Already cleared for import into the EU Dimensions and weight Nwodpszyvdpsfx Ag Ren - Width: 1.60 m - Length: 3.20 m - Height: 2.00 m - Platform height: 1.08 m - Sideboard height: 1.45 m - Vehicle weight: approx. 1.86 tons Extensive restoration - investment approx. €40,000 In 2001, the Unimog was professionally restored with great effort and special care. The work was carried out by the specialist workshop Franz & Michael Schuth - Restoration and Repair, Agricultural Machinery Master Workshop. The restoration costs amounted to around €40,000. The quality of the restoration was confirmed by an appraisal from 2002 with the exceptional condition rating of 1+. Extensive documentation Numerous historical and technical documents are included with the vehicle: - Swiss vehicle registration document - Proof of import and EU customs clearance - Appraisal from 2002 with condition rating 1+ - Classic car appraisal according to § 21 StVZO (TÜV) - Unimog specialist book - Original operating manual, version C This documentation complements the historical value of the vehicle and makes the Unimog particularly interesting for collectors and classic car enthusiasts. Optional: Matching historic long timber trailer A historic long timber trailer is available to match the Unimog, which can be purchased for an additional charge of €5,000. - Trailer: Long timber trailer - Stated weight: 1,600 kg - Total weight of Unimog and trailer: approx. 3.46 tons This combination offers a particularly attractive option for classic car meetings, historical demonstrations, collections or exhibitions. Information provided to the best of our knowledge. Errors and prior sale excepted. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors!

Condition: good (used), Year of construction: 2009, machine/vehicle number: 00273444, Offer 26285 Nwedj Adp T Nepfx Ag Ren Technical specifications: - Water-cooled WIG – DC welding machine, mobile - Welding current continuously adjustable with digital display - min. 5 A to max. 350 A, 100% - Maximum connection power 24 kVA - Mains connection 400 V - Includes: - SYNERGIC control with up to 256 programmable welding tasks - 2-cycle – 4-cycle setting - HF ignition and Liftarc - Gas pre-flow control, etc. - 8m hose package, lightweight version - Ground cable - Pressure reducer - Space requirement approx. W 510 x H 990 x D 990 mm - Weight approx. 150 kg

Condition: used, Year of construction: 2004, machine/vehicle number: DEPAL41, Used ACMI RASAR D200 depalletizerTechnical Specifications & Performance DataThis ACMI RASAR D200 depalletizer is a reliable solution for high-efficiency bottle handling within a used bottling line or second hand industrial packaging environment. Engineered for beverage production and general industrial packaging, it processes layers of bottles from standard pallets with precise and gentle handling. Designed for glass and PET bottle applications, it offers stable performance for multiple beverage categories, ensuring dependable operation in demanding production schedules.Manufacturer: ACMIModel: RASAR D200Year: 2004Machine type: DepalletizerMaximum speed: 16,200 bph (application dependent)Container materials: Glass, PETPallets handled: EPAL 800x1200 mmWorking height: 1200 mmOperating pressure: 6 barSupply voltage: 400 V (3PH + N)Frequency: 50 HzRated current: 51 AAuxiliary voltage: 24 V DCShort-circuit rating: 6 kAElectrical schematic code: EOC3691Approx. layout dimensions: length 14,367 mm; width 4,915 mmAdvanced Automation & Control SystemsThe ACMI RASAR D200 features an industrial-grade automation package centered on a Siemens PLC, delivering robust control, diagnostic capability, and stable operation. The control system supports automatic layer handling with coordinated movements for layer separation and transfer to downstream conveyors. Electrical architecture uses a 400 V three-phase supply with 24 V DC auxiliaries for sensors and control devices, ensuring safe and reliable low-voltage control.Siemens PLC-based control for dependable automation24 V DC auxiliary circuits for instrumentationClear operator interface and status signaling for quick troubleshootingIntegrated interlocks for safe operation and process controlProduction Line Integration CapabilitiesThe depalletizer integrates seamlessly into beverage production lines and broader packaging machinery systems. It interfaces with infeed/outfeed conveyors and can operate as a standalone depalletizing cell or as part of a complete bottling line. The RASAR D200 handles EPAL 800x1200 mm pallets and can be set up for multiple bottle patterns and sizes within glass and PET ranges, supporting flexible changeovers for different end products.Inline or standalone operation modesCompatible with upstream pallet handling and downstream bottle conveyorsDesigned for Glass and PET bottle handling across various sizesSuitable for Water, CSD, Wine, Beer, Spirits, Milk, and Oil applicationsMachine Condition & Maintenance HistoryThis unit is ready for operation and presented in excellent working order. It has been overhauled and is supplied with compatible spare parts. A warranty support period of 6 months is indicated, reinforc... Nwsdpfx Age Adtz Rj Ren

Condition: used, mileage: 374,190 km, power: 235 kW (319.51 HP), first registration: 09/2018, fuel type: diesel, number of seats: 32, gearing type: automatic, emission class: euro6, color: red, brakes: retarder, Equipment: ABS, air conditioning, * Our internal number: 1213 * MAN Lions City A 21 * FIRST OWNER * Registered: 09/2018 * AVAILABLE in multiple units, registered from 2019 - 2017 * Repair and maintenance records available * Automatic transmission * 235 kW / EURO 6 C * Retarder * AIR CONDITIONING * Auxiliary heater * Convector heater * 33 seats * 1 wheelchair space * 51 standing places * Matrix display * Control unit installed * Vehicle class: 1 * 85 km/h - approved according to COC certificate * Mechanical folding ramp * etc. * Condition: well-maintained vehicle from a reputable source! TOP!! * Front tires: approx. 30%, rear tires: approx. 70% * Excerpt from the repair history: * Water pump replaced 06/2026, brake pads/discs (rear) replaced 12/2025, vehicle lubrication, maintenance service for automatic transmission oil and differential, * Fuel tank renewed, ... * The customer is obliged to independently verify the condition and equipment of the goods/vehicle! * etc. * Vehicle may be in use / mileage and condition may vary * All information without guarantee * We reserve the right of interim sale Nedpo Afa Tcofx Ag Rjwn * We refer to our general terms and conditions

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Horizon HT-30 Used trimmer for cutting three sides in a single pass excellent conditon in production Standard equipment: Njdoz Ti Dnjpfx Ag Rown Untrimmed Book Size: Max: 320 x 235 x 51 mm; Min: 152 x 136 x 1 mm Trimmed Book Size: Max: 305 x 230 x 51 mm; Min: 148 x 134 x 1 mm Capacity: Up to 520 books per hour pressure: Max 8 kN

Condition: good (used), Year of construction: 2007, functionality: fully functional, load capacity per storage section: 11,500 kg, total length: 390,000 mm, total height: 7,000 mm, total width: 1,000 mm, shelf height: 7,000 mm, support length: 2,700 mm, shelf length: 51,300 mm, load capacity: 1,000 kg, load capacity per stand: 11,500 kg, frame height: 7,000 mm, load per truss pair (max.): 3,000 kg, frame width: 85 mm, axle spacing: 2,700 mm, mesh size: 2,700 mm, number of shelf rows: 7, pallet spaces: 1,845 euro pallets, construction width: 27,003,600 mm, For sale is a comprehensive used pallet racking system, predominantly from STOW, with additional sections from Link 51 and Allclick. The system has already been completely disassembled, sorted, and is ready for loading at any time. Negotiable price: €32,000 net The offer includes: Nwsdpfxjzugtdj Ag Ron STOW 95 pcs. frames, height 7,000 mm, depth 1,000 mm 720 pcs. beams, length 2,700 mm Load capacity approx. 1,000 kg per pallet STOW 20 pcs. frames, height 7,500 mm, depth 1,000 mm 114 pcs. beams, length 3,600 mm Load capacity approx. 1,000 kg per pallet LINK 51 17 pcs. frames, height 7,500 mm, depth 1,000 mm 120 pcs. beams, length 2,700 mm Load capacity approx. 1,000 kg per pallet ALLCLICK 8 pcs. frames, height 7,200 mm, depth approx. 1,000 mm 95 pcs. beams, length 3,600 mm Load capacity approx. 640 kg per pallet Total: 140 pcs. racking frames 1,049 pcs. beams Also available: Back panel mesh covering an entire row of racking approx. 51,300 mm length × 7,000 mm height Impact protection various racking accessories The entire system was documented with photos, videos, and drone footage before disassembly. The racking system has already been completely dismantled and can be loaded or picked up at any time. Inspection and loading are possible by arrangement. Partial sale or sale of individual systems or larger sub-sets is possible by agreement.

Condition: excellent (used), mileage: 969,046 km, power: 316 kW (429.64 HP), first registration: 12/2013, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,850 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, total length: 6,310 mm, total width: 2,500 mm, Equipment: ABS, AdBlue, cruise control, power mirror, = Additional options and accessories = - Radio/CD player - Sleeping cabin Nodpfx Aozlqh Tsg Rewn = More information = General information Number of doors: 2 Year of construction: 2013 Cab: single Registration number: 51-BDL-5 Technical information Number of cylinders: 6 Engine capacity: 10.677 cc Front axle: Steering Rear axle: Double wheels Weights Empty weight: 7.279 kg Carrying capacity: 11.721 kg GVW: 19.000 kg Max. towing weight: 50.000 kg Interior Number of seats: 2 Condition Technical condition: very good Visual appearance: very good Financial information Price: On request = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: ready for operation (used), Year of construction: 2001, operating hours: 45,000 h, functionality: fully functional, volume flow: 342 m³/h, pressure dew point: 3 °C, type of cooling: air, For sale is a used Kaeser TD 51 refrigerant dryer from our company’s stock. Manufacturer: Kaeser Type: TD 51 Year of manufacture: 2001 Nwsdpjz R I T Refx Ag Rsn Operating hours: approx. 46,275 h (Operating hours taken from the associated compressor) Available from: December 2026 The dryer is currently in operation and functions without any known issues. The condition is good. The unit has been regularly maintained and reliably used in ongoing operations. We are not aware of any technical defects. An on-site inspection is possible after prior arrangement.

Condition: good (used), Year of construction: 2010, operating hours: 5,750 h, functionality: fully functional, turning length: 393 mm, turning diameter: 200 mm, spindle bore: 51 mm, MSX 853 cnc control 3-jaw chuck diameter 210mm 12-fold revolver C-axis driven tools tail stock coolant device chip conveyor Technische Daten: / technical details Nwsdpfezd S S Rsx Ag Rjn Drehdurchmesser / turning diameter 200 mm Drehlänge / turning lenght 393 mm X-Weg / X-travel 160 mm Z-Weg / Z-travel 450 mm max. Drehzahl Spindel / max. spindle speed 50-3000 UpM /rpm Eilgang X/Z / rapid feed X/Z 24/30 Anzahl der Revolverplätze / number of tool places 12 max. Stangendurchmesser / max. bar diameter 51 mm Antriebsleistung Spindel / drive capacity spindle 13,5 kW Gewicht ca. / weight ca. 3500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: excellent (used), Nakamura-Tome Super NTJ 9-Axis Turn/Mill Centre Year: 2003/2004 Serial Number: B150509 Control: Fanuc 18i-TB Main Spindle Maximum bar capacity: 65 mm Maximum turning diameter: 190 mm Spindle nose: A2-6 Spindle power: 15 kW Spindle speed: 4,500 rpm C-axis indexing: 0.001° Sub-Spindle Maximum bar capacity: 51 mm Spindle nose: A2-5 Spindle power: 11 kW Spindle speed: 5,000 rpm C-axis indexing: 0.001° Stroke: 760 mm Upper Turret Number of tool stations: 24 Motorised tool stations: 24 X-axis travel: 345 mm Y-axis travel: ±45 mm Z-axis travel: 1,240 mm B-axis travel: ±91° Live tooling speed: 6,000 rpm Live tooling power: 5.5 kW Lower Turret Number of tool stations: 24 Motorised tool stations: 12 X-axis travel: 167.5 mm Z-axis travel: 685 mm Live tooling speed: 6,000 rpm Nwjdpfx Ao Aaz Nzeg Ren Live tooling power: 5.5 kW

Condition: excellent (used), Year of construction: 2008, Nakamura Super Mill WY-250 CNC Lathe Capacity: Max. turning diameter: 215 mm Standard turning diameter: 150 mm Distance between centers: max. 870 mm / min. 250 mm Max. turning length: 580 mm Bar capacity left/right: L: 65 mm R: 51 mm Chuck size: left: 210 mm (8″) right: 165 mm (6″) Axis travel: Slide travel (X1 / X2): 160.5 mm / 160 mm Slide travel (Z1 / Z2): 580 / 580 mm Slide travel (Y1 / Y2): ±50 mm / -50 mm, +20 mm Slide travel (B2 axis): 620 mm Rapid traverse X1 / X2: 18 m/min Rapid traverse Z1 / Z2: 36 m/min Rapid traverse B2 axis: 36 m/min Rapid traverse Y1 / Y2: 10 m/min Main and sub spindle: Spindle speed: 4500 rpm / 5000 rpm Speed range: stepless / stepless Spindle nose: A2-6 / A2-5 Spindle bore: 80 mm / 63 mm Front bearing inner diameter: 110 mm / 90 mm Drawtube diameter: 66 mm / 52 mm C-axes: Minimum input unit: 0.001° Minimum command increment: 0.001° Max. indexing speed: 600 rpm Feed speed: 1–4800 mm/min C-axis lock: disc brake C-axis positioning time: 1.5 s Nedpey Ipp Rsfx Ag Rown Upper/lower turret: Turret type: 12-position drum turret Number of tool stations: 48 (2 x 24) Square tool size: 25 mm Round shank tool size: 32 mm Driven tools: Drive system: single drive Spindle speed: 6000 rpm / 3600 rpm Speed range: stepless Number of driven tool stations: 12 × 2 Collet size: ER32 Straight toolholder size: 2 mm – 20 mm Cross toolholder size: 2 mm – 20 mm Drive power and torque: Left spindle: 18.5 / 11 kW 225 / 185 Nm Right spindle: 15 / 11 kW 120 / 120 Nm Tool spindles: 7.5 / 3.7 kW 40 / 16 Nm General: Machine height: 2395 mm (without extraction) Footprint: 4436 mm × 2674 mm / 4905 mm × 3331 mm Machine weight: 14,000 kg Scope of supply as shown in photo gallery includes, among others: Nakamura lathe, toolholders (driven and non-driven), collets, complete operating documentation, portal loader and loading robot, Iemca Master 880 Verso bar feeder, peripheral devices (chip conveyor, transformer, oil mist separator, etc.) No guarantee is given for the correctness, completeness or currentness of the information provided.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 24,660 h, spindle motor power: 15,000 W, spindle speed (max.): 4,500 rpm, travel distance X-axis: 210 mm, travel distance Z-axis: 580 mm, total height: 2,225 mm, total width: 1,725 mm, bar diameter (max.): 65 mm, overall weight: 4,570 kg, controller manufacturer: FANUC, controller model: Series 18i-TB, product length (max.): 3,039 mm, workpiece diameter (max.): 335 mm, number of slots in tool magazine: 12, number of axes: 4, This 4-axis Hyundai Wia L2100SY turn-mill centre was manufactured in 2012. It features a maximum turning diameter of 335 mm and a turning length of 455 mm. The machine is equipped with a 12-station turret and a spindle speed of up to 4,500 rpm. If you are looking to get high-quality turning capabilities, consider the Hyundai Wia L2100SY machine we have for sale. Contact us for further details. Spindle hours total 24,660Control Unit: FANUC Series 18i-TBVoltage: 380 V (3Ø)Frequency: 50 HzRated Power: 33 kVAFull Load Current: 51 AControl Voltage: AC 110 V / DC 24 VSwing Over Bed: Ø630 mm (24.8")Swing Over Carriage: Ø390 mm (15.4")Max. Turning Diameter: Ø335 mm (13.2")Max. Turning Length: 455 mm (17.8")Bar Capacity: Ø65 mm (2.6")Chuck Size: Ø210 mm (8")Spindle Bore: Ø76 mm (3")Spindle Speed Range: 45–4,500 rpmSpindle Motor (Continuous): 15/11 kW (20/15 HP)Spindle Motor (Maximum): 25.4/18.5 kWSpindle Torque (Continuous): 254.2 NmSpindle Torque (Maximum): 597.7 NmSpindle Nose: A2-6Rapid Traverse X/Y: 24/24 m/minRapid Traverse Z: 18/12 m/minSlide Type: Box GuideTurret: BMT65OD Tool Size: □25 × 25 mmID Tool Size: Ø50 mm (2")Indexing Time: 0.2 sec/stepX-Axis Motor: 5.5/3.7 kWZ-Axis Motor: 5.5/3.7 kWTorque: 5,000 NmCoolant Tank Capacity: 220 L (58.1 gal)Lubrication Tank Capacity: 0.9 L (0.5 gal)Power Requirement: Over 35 kVAMain Spindle Chuck: Samchully MH-208Sub Spindle Chuck: Samchully HS-06Chuck Jaws optional Njdpszimmgsfx Ag Rjwn Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: excellent (used), Year of construction: 1989, Jung JF 520 Jung JF 520 surface grinding machine, manufactured in 1989 / 2019, mechanically overhauled, very good original condition. The machine comes from the technical department of a renowned German die-casting company. Technical data: Year of manufacture 1989 / 2019 Technical data Clamping area (L x W in mm) 600 x 200 Oversize grinding area (L x W in mm) 600 x 250 Magnet size max. mm 500 x 200 Grinding wheel dimensions max. mm 225 (250) x 25 x 51 Distance table/spindle center mm Max. 400 Table longitudinal feed, oscillating m/min 1 – 20 Creep feed mm/min 0 – 500 Grinding spindle drive, speed rpm 800 – 4200 Power kW (with creep feed) 1.6 – 2.2 Machine weight approx.: 2.0 t Accessories and equipment: Magnet Coolant system Machine feet Grinding wheel About the machine: We offer a Jung JF 520 surface grinding machine, manufactured in 1989 / 2019, in very good condition. The machine is, of course, fully functional and has approximately 250 operating hours since its overhaul. All slides run very smoothly and evenly. Even at high speeds, the Jung runs very quietly. This newer generation of surface grinding machines is very user-friendly, and surfaces with a low Ra value can be produced. Take advantage of the opportunity to inspect this machine on site under power and see for yourself the condition of the machine. Njdoz Agz Repfx Ag Rswn Video: Jung JF 520 You can find more surface grinding machines from well-known manufacturers on our website.

Condition: used, maximum load weight: 29,544 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 05/2022, Year of construction: 2022, EN 12642 XL, beverages, Daimler, continuous lashing points in the outer frame, lift axle, LED side marker lights linked with indicator, LED reversing lights, pallet stop bar, curtain quick-release at the front, RSAB Roof Safety Airbag to prevent water and ice sheet formation Njdjzkpg Eepfx Ag Rewn

Condition: used, Year of construction: 2010, operating hours: 965 h, 2010 | Case 721E | Used Wheel Loader | 965 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 50500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 51 inspection points 45 approved ✅ 6 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Good general and operating condition. The number of hours shown on the display is incorrect. The machine has about 6000 hours: used as a standby snow removal machine at a ski resort. Hydraulic coupler, auxiliary line, 1 bucket in good condition. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41271 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed Nwsdpfx Asz S T Tkeg Rsn ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Tekol / Trumpf Laser welding system Tekol LAP S4 with TRUMPF TruPulse 44 and TBH GL230 extraction system Description: For sale is a professional Tekol LAP S4 laser welding system with an integrated TRUMPF TruPulse 44 pulsed Nd:YAG laser and TBH GL 230 extraction system. The system is a closed, precision laser welding station for fine, pinpoint and low-distortion welding operations on metal parts. The pulsed laser enables very controlled heat input, clean weld spots and reproducible results. Ideal for precision engineering, toolmaking, repair welding, prototype construction and small series production. Closed protective cabin with safety system, control unit, rotary table and extraction/filter system. Technical data – system Tekol LAP S4 Operating voltage: 400 V ~ N / PE Current type: 3~ 400 V, 50 Hz Rated current: 32 A (approx. 22.5 kVA) Control voltage: 24 V DC Dimensions: Length: approx. 1330 mm, Depth: approx. 1300 mm, Height: approx. 2030 mm Weight: Machine: approx. 800 kg Travel ranges X-axis: approx. 160 mm Y-axis: approx. 100 mm Z-axis: approx. 100 mm Rotary table: 2-stage Technical data – laser TRUMPF TruPulse 44 Laser type: Nd:YAG pulsed laser Wavelength: 1064 nm Max. average power: 42 W Min. pulse power: 201 W Max. pulse power: up to 3 kW Pulse duration: 0.2 – 50 ms Max. pulse energy: 30 J Max. pulse frequency: up to 900 Hz Beam parameter product: 16 mm·mrad Technical data – extraction system TBH GL 230 Voltage: 230 V / 50–60 Hz Power: 0.36 kW Air volume flow, free-blowing: approx. 390 m³/h Effective volume flow: approx. 330 m³/h Max. negative pressure: 4000 Pa Sound pressure level: approx. 51 dB(A) Weight: approx. 40 kg Multi-stage filter system: Pre-filter Particle filter Activated carbon filter Weight approx. 900 kg Nwsdpfx Aozizpcjg Rjn Condition: used Scope of delivery: (See picture) Laser welding system Tekol LAP S4 TRUMPF TruPulse 44 laser unit Extraction system TBH GL 230 Documentation / folders / data storage media Keys and accessories as shown in the photos (Changes and errors in the technical data and specifications are subject to change!) We will be happy to answer any further questions you may have by telephone.