Used Matra Stm 600 for sale (11,322)

Condition: used, Year of construction: 2000, grinding length 600 mm grinding width 300 mm Tedpfxox U A Ugo Amyja magnetic clamping plate 600x200 mm wheel diameter 220-300 mm machine weight ab. 2200 kg

Condition: used, Year of construction: 1975, Technical details: grinding length: 600 mm grinding width: 300 mm workpiece height: 450 mm Todpevb Dmlsfx Amyja total power requirement: 8 kW weight of the machine ca.: 2,2 t dimensions of the machine ca.: 2,8 x 3,0 x 2,0 m grinding spindle speed: 1440 / 2905 U/min with magnetic plate 600 x 200 mm autom. vertical feed coolant attachment *

Condition: ready for operation (used), Max. swing over bed: 528 mm Max. swing over cross slide: 370 mm Max. turning length: 785 mm Spindle bore: 77 mm Todpfox Hx A Dox Amyja Main spindle speed range: 20 - 3,500 rpm Tool turret: 12 positions Control: FANUC O-T Year of manufacture: 2000 Machine weight approx.: 6,200 kg

Condition: used, Year of construction: 2024, Applicable material: Manure Tedpfxeyapbce Amysa

Condition: ready for operation (used), Two identical machines are available. Connected load: 32kW, length: 3500mm, width: 2400mm, height: 2400mm, weight: 3t. On-site inspection is possible. Tjdpfouyk Rlox Amyea

Condition: used, Year of construction: 2013, operating hours: 3,000 h, functionality: unexamined, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, For sale as a complete package: Waterjet Cutting Machine STM 3015, year 2013, with computer from 2018 and 3 network dongles for IGEMS software. Working area: 3000x1500mm High-Pressure Pump Ecotron 40.37, year 2013 Water Softening System, year 2018 – like new Abrasive Backwash System, year 2013 Column Slewing Crane Abus 2t, year 2018 – like new Vacuum Lifting Device Devo-Tech, load capacity 1800kg – like new Various accessories and sandbags available The system was purchased at the end of 2018 and commissioned at the beginning of 2019. The waterjet system and pump had been completely overhauled by the supplier at that time. Tjdpfxsyq Rdys Amyoa Unfortunately, the cutting system was hardly used. It only ran for a few hours per year and has not been in operation since about July 2025. The high-pressure pump is defective (leaks water and is not sealed). Both high-pressure cylinders have been replaced in recent years. Last serviced in 2025. According to the service technician, repair of the pump would cost approx. CHF 5,000 to 6,000. The crane and vacuum lifting device can also be purchased separately. Please send your offer with price expectations. In 2019, the new price for the crane and vacuum lifter was around CHF 37,000 incl. VAT. The machine can be inspected during business hours. It is still connected, but has been drained and cleaned. Please arrange appointments or submit offers via email, not by phone.

Condition: ready for operation (used), operating hours: 46,652 h, functionality: fully functional, machine/vehicle number: 661227, feed length X-axis: 600 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, spindle speed (max.): 4,000 rpm, power: 5.5 kW (7.48 HP), No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 600 mm Travel range Y-axis: 400 mm Travel range Z-axis: 400 mm Spindle speed range: 40 – 4,000 rpm Spindle connection: ISO 40 Table surface area: 900 x 480 mm MACHINE DETAILS Spindle power: 5.5 kW Operating hours: 46,652 h Machine weight: 2,900 kg Todpfx Amszpxfboysa EQUIPMENT Digital position display Millplus CNC

Condition: good (used), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, electrical fuse: 16 A, opening width: 30 mm, type of input current: three-phase, Fritsch Rollfix 3WK 600 sheeter for all types of dough for sheeting and lamination roller width 600 mm roller gap 0.3 to 30 mm mobile dough sheeter Tsdpfx Aezq Uw Asmyea with hand and foot control connection 400V, 16A CEE plug used machine

Condition: new, functionality: fully functional, Features of the system 1. Chain conveyor, 2.9 meters in length (other lengths available upon request) 2. Two custom-made forming shoulders with a fixed shape, adapted to the product dimensions 3. Single film loader + Automatic film centering device 4. End sealing unit, box motion, single sealing jaw 5. Robust, medium fin sealing structure 6. Eight servo-controlled drives 7. HMI control panel 8. Four individual temperature controllers 9. Housing made of stainless steel 304 10. Documentation in the local language 11. Print mark control Tsdpfx Amsk Dz Hweyoa 12. Bag length programmable 13. Standard running direction: left to right Technical parameters 1. Product length: L120-600mm 2. Product width: B70-250mm 3. Product height: H20-120mm 4. Packaging speed: up to 60 products/min (depending on product, bag length, and material) 5. Maximum film width: 600 mm 6. Connection voltage: 1 phase, 220V 50Hz 7. Total power consumption: approx. 8.8 kW 8. Machine weight: approx. 1100 kg 9. Machine dimensions: approx. 4500 x 1070 x 1590 mm

Condition: used, Year of construction: 1997, Roller diameter: 600 mm Outrigger extension: 580 mm Cutting depth: Table can be swivelled: yes Tjdpfxszqyxfo Amyoa Belt speed: Motor power: 2.2 kW Motor brake: yes / automatic Dust extraction connection: 100 mm and 120 mm Machine length: 1150 mm Machine width: 850 mm Machine height: 2100 mm Weight: 200 kg

Condition: used, Year of construction: 2025, *New machine* Electric rotor with milled knife pockets. Rotor length: 600 mm, rotor diameter: 260 mm. Large hopper measuring 600 x 800 mm. Reliable material feeding with hydraulically controlled slide. Sturdy rubber feet to efficiently absorb vibration. Pusher-down clamp for long and large parts. Large 40 x 40 mm knives for optimal material feed. Special clearing knives prevent lateral jamming. Screen perforation from 10 – 40 mm. Control cabinet including electrical control (Siemens PLC) and star-delta start. Very robust gearbox. Hopper opening: 600 x 800 mm. Hopper capacity: 0.6 m³. Rotor working width: 600 mm. Rotor diameter: 252 mm. Drive power: 15 kW. Rotor speed: 90 rpm. Storage location: Supplier Todpfxovvi Ane Amyea

Condition: good (used), Hand wash basin, wash basin, welded-in basin, welded-in swivel basin Tjdpfob Uhngex Amyea -Stainless steel sink -Internal dimensions: 600 x 450 mm -Depth: 300 mm -Edge: 18 mm -Number: 11x available -Hole bottom left: 2/Hole bottom right: 9 -Price: per piece -Dimensions: 640/500/H300 mm -Weight: 5.1 kg

Condition: used, Injection molding machine ARBURG, type Allrounder 320 C 600-100 Year of manufacture: 09/2002 Clamping force: 60 tons Screw diameter: 25 mm The machine will be dismantled on August 17, 2026, and transported to our warehouse or directly to your location. Todozqglrepfx Amyoa

Year of construction: 2015, operating hours: 2,420 h, condition: ready for operation (used), travel distance X-axis: 300 mm, controller manufacturer: SIEMENS, controller model: 840D, overall weight: 5,500 kg, spindle motor power: 2,000 W, spindle speed (max.): 600 rpm, number of axes: 2, Cylindrical grinding machine manufactured in 2015. This GEIBEL & HOTZ RS 600 C features a maximum swing diameter of 275 mm and a center distance of 600 mm. It is equipped with a grinding spindle motor power of 5.5 kW and operates at speeds ranging from 700 to 2100 rpm. If you are looking to get high-quality grinding capabilities, consider the GEIBEL & HOTZ RS 600 C machine we have for sale. Contact us for further details. • Center distance: 600 mm • Center height: 140 mm • Max swing diameter: 275 mm • Max workpiece weight between centers: 100 kg • Max workpiece torque (flying): 40 Nm (including clamping devices)Workpiece spindle • Taper: MK4 and KK5Tailstock • System: Cylindrical screw pressure spring • Operation: Manual via hand lever • Quill stroke: approx. 40 mm • Taper: MK4Grinding spindle • Arrangement: Left • Motor power: 5.5 kW • Speed: 700–2100 rpm • Bearing: Precision rolling bearings • Lubrication: Lifetime lubricationGrinding wheel • Standard size: 400 × 50 × 127 mm • Bore: 127 mm • Width: 20–50 mm • Taper: 5° • Max diameter: 55 mm (taper reference) • Flange diameter: 175 mm • Speed range: 15–35 m/s (constant cutting speed control)AxesX-axis (= FEEDBACK MOVEMENT) • Drive: Electromechanical with ball screw • Feed rate: 0.01–8000 mm/min • Setup: Electric handwheel or direction push button • Measuring system: Glass scale, internal resolution 0.0005 mmZ-axis (= TABLE MOVEMENT) • Drive: Electromechanical with ball screw • Table speed: 0.01–12000 mm/min • Setup: Electric handwheel or direction push button • Measuring system: Rotary encoder, resolution 0.001 mmControl / Electrical • The control panel is mounted to the machine stand using a swivel bracket. • Control system: Siemens 840D • Drive system: Siemens SINAMICS • Emergency stop components, safety integrated • Motor protection switch, fuses: Siemens • Connectors: WAGO Harting connectors in the work area • Operating voltage: 400 V, 50 Hz, 3 phase • Network type: TN network, without residual current device (RCD) • Control voltage: 230/24 V • Installed electrical power: approx. 14 kW / 18 kVA • Compressed air: Oil-free compressed air, approx. 5 bar • Control cabinet: Air conditioning unit • Electrical cabinet equipment: Interior lighting • Service socket: 230 V / 3 APneumatics / Coolant • Compressed air requirement: approx. 5 bar, oil-free • Coolant tank capacity: approx. 300 L • Coolant pump capacity: 50 L/min at 3.5 bar • Cleaning pump capacity: 20 L/min at 1.5 barOperating data • Operating hours: 2,420 hours Tedoyzn Dmjpfx Amysa Additional equipment • Air extraction unit • Capacity: approx. 1000 m³/h • Dimensions: approx. 460 × 840 × 580 mm • Three-jaw chuck • Diameter: 160 mm • Operation: Manual • Weight: approx. 10 kg

Condition: new, Leuze Lumiflex safety light curtain CT 14-600 / 561106, compact transmitter / sender + CR 14-600 / 564106 receiver / receiver, serial number: 5044403, unused, in opened original packaging, 100% functional, scope of delivery as shown in the photos. Todpfxjzp Tpbj Amyea

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 5,513 h, load capacity: 2,500 kg, lifting height: 4,985 mm, free lift: 1,500 mm, fuel type: electric, mast type: triplex, construction height: 2,220 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 600 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Technical condition: good Front tire type: Superelastic Front tire condition: 40 - 60% Rear tire type: Superelastic Rear tire condition: 40 - 60% Battery type: PzS Description: Side shifter, double pallet fork, 3rd valve, rear work light, front work light, heater, compliant with German Road Traffic Licensing Regulations (STVZO), full cabin, full free lift, joystick, LED. Tedjwfuv Ropfx Amysa

Condition: used, machine/vehicle number: 12248, Rotor diameter: 300 mm Rotor width: 600 mm 3-blade rotor 4 rows of stator blades Inlet cross-section approx. 300 x 600 mm Drive motor: 37 kW Todpjyr Tnwsfx Amyoa

Condition: used, machine/vehicle number: 11481, Rotor diameter: 300 mm Todpfjyr Tkxjx Amyja Rotor width: 600 mm 3-blade rotor 4 rows of stator blades Inlet cross-section approx. 250 x 600 mm Drive motor 37 kW

Year of construction: 2007, condition: excellent (used), HEIDENHAIN iTNC530 with B + C axis Working travels 885 x 800 x 520 mm Table size 600 x 500 mm Tedpoh Agwrsfx Amyea Table swivelling +30°/-120° Table rotating 360° Spindle taper SK40 Big Plus Spindle speeds -15'000 rpm tool changer 60 pos. Coolant through spindle 3D tracer Renishaw MARCELS MASCHINEN CH

Condition: used, Year of construction: 1997, Mikron UME 600 - Vertical Machining Center Tool holder: SK40 Todpfx Aozpymyjmyja X/Y/Z: 600 / 500 / 450 mm - Heidenhain TNC 407 CNC control - SARA UC1 SD3 air purifier - Coolant system - Chip conveyor - Year of manufacture: 1997 Technical data - Spindle taper: SK40 - Travel range X-axis: 600 mm - Travel range Y-axis: 500 mm - Travel range Z-axis: 450 mm - Feed rate range: 0 - 10000 mm/min - Spindle speed: 5 - 5000 rpm - Quill stroke: 90 mm - Table size: 900 × 530 mm - Spindle power: 6 kW - Total power requirement: 9 kW - Operating voltage: 400 V - Space requirement with control & extraction unit WxHxD: 3500 x 3000 x 3500 mm - Dimensions without control & extraction unit WxHxD: 2400 x 2100 x 2700 mm - Total weight: approx. 3400 kg

Condition: good (used), Year of construction: 2020, operating hours: 10,713 h, load capacity: 5,000 kg, lifting height: 3,850 mm, fuel type: electric, mast type: duplex, construction height: 2,850 mm, Manufacturer + model:STILL RX 60 - 50 / 600 Mast:2W3850 ID:25011.6088 Cat.:Used Mast:2W Forks:2400 mm Lowered height:2850 mm Lifting height:3850 mm Tedpfxjzq Ubbo Amyja Capacity:5000 kg Year:2020 Hours:10713 hours Capacity:80 v / 930 ah Options:- LINDE steering - Duo pedal!!! - New NON marking!!! - Windshield & Rear window!!!

Condition: like new (used), Year of construction: 2018, operating hours: 591 h, load capacity: 2,000 kg, lifting height: 2,500 mm, fuel type: electric, mast type: duplex, construction height: 2,120 mm, Manufacturer + model: JUNGHEINRICH EJG 320 Mast: 2W2500 ID: 24061.5795 Tedpfx Amozq T Ugoyja Category: Demo Mast: 2W2500 Lowered height: 2120 mm Lifting height: 2500 mm Capacity: 2000 kg Year: 2018 Operating hours: 591 hours Battery: 24 V / 330 Ah - GEL Options: VERY unique CONTRA stacker!!! Equipped with: - FREESTANDING adjustable forklift forks - SUITABLE for all pallet types - POWER STEERING!!! Complete, LIKE NEW!!

Condition: like new (used), Year of construction: 1970, turning height: 4,000 mm, workpiece weight (max.): 100,000 kg, turning diameter: 17,000 mm, faceplate diameter: 5,000 mm, Universal machine 5-axis (turning, milling) Froriep 40KE 500/600-400 Spheromill Year of construction: 1970 (modernized 1984 and 2006) Control: Siemens 840D Milling length: 8500 mm Working height max: 4000 mm Maximum turning diameter: 17,000 mm Table diameter: 5000 mm Ram setting: -15 degrees to +90 degrees Table speed max: 40 rpm (100 kW) Maximum working load: 100 tons Accessories Tsdpfx Amoym Ri Usyja Milling head (800 rpm / 60 kW) Universal milling head (630 rpm) Facing slide for diameter max. 1000 mm Grinding equipment 90 degree angle head (630 rpm) 90 degree angle head (450 rpm) - small

Condition: like new (used), functionality: fully functional, Year of construction: 2017, operating hours: 1,686 h, load capacity: 2,500 kg, lifting height: 5,180 mm, free lift: 1,760 mm, load center: 600 mm, fuel type: electric, mast type: triplex, construction height: 2,380 mm, battery capacity: 620 Ah, remaining battery capacity: 92 %, battery voltage: 80 V, DGUV certified until: 07/2027, fork length: 1,200 mm, Equipment: CE marking, UVV, cabin, full service history, lighting, sideshift, Still RX 60-25/600 electric forklift with the following specifications: * Operating hours: 1,680 Tjdpfjzfxzzox Amyja * Lifting capacity: 2,500 kg * Lifting height: 5,180 mm * Overall height: 2,380 mm * Year of manufacture: 2017 STILL 2.5-ton electric forklift with a full cabin and heater, battery at 92%, tires with no signs of wear, triplex mast with full free lift, side shifter, lighting compliant with StVZO (German Road Traffic Regulations), fork length 1,200 mm (other fork lengths available upon request), new charger. Includes 1,000 hours of service according to STILL manufacturer's specifications and a valid UVV inspection upon sale. We would be happy to arrange a viewing, demonstration, and test drive by appointment. Sales are exclusively to commercial businesses; subject to prior sale, errors, and typographical errors. We can deliver your new forklift cost-effectively using our own ramp-equipped low-bed trailer (transport costs upon request). You can find more information about us and our other offers on our website.

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, warranty duration: 6 months, Function The TAM 25/600 precisely separates and cuts ejector pins, ejector sleeves, and knockout punches in the shortest possible time. Workpieces with diameters from 0.5 to 25 mm made of tool steel and hard metal can be processed. Your advantages: • User-friendly quick-change system • Fast loading and unloading of workpieces • Separating and cutting to length in a single operation Simply place the workpiece in the quick-change prism, set the desired finished dimension, and separate and cut to length in one step. An optional additional clamping device is available for extremely thin, short, or offset pins. • Additional clamping device for thin, short, and offset pins Precision After separating, the work table is locked in the end position, the length is measured precisely, and ground to the finished dimension using an integrated micrometer feed. The wear of the grinding wheel is compensated by tracking the grinding spindle. Your advantages: The integrated diamond automatically dresses the wheel. On request, CBN or diamond grinding wheels are also available as optional equipment for the TAM 25/600. Tsdpfx Amozq Srwjysa • Precise workpiece positioning via micrometer screw • Integrated dressing diamond for the grinding wheel • Integrated coolant system to prevent overheating of the workpiece • Trackable grinding spindle, so that the cutting edge of the grinding wheel always remains in the 0 position We also offer overhaul services for your old separating and cutting machine; simply contact us!