Used Liebherr Gear Grinding Machine for sale (69,124)

Condition: used, Year of construction: 2008, control Siemens 840D Hjdpfxswzypns Ak Djl

Condition: good (used), Year of construction: 1981, max. wheel diameter 650 mm gear width 450 mm max. module 10 milling head speed 32-256 U/min Hsdpfjy H Nz Dsx Ak Del electrics - voltage/frequency 380/50 V/Hz table load 1,8 t max. milling cutter diameter 192 mm cutter length max. 250 mm milling tool taper SK 40 weight of the machine ca. 11,5 t dimensions of the machine ca. 3,4x1,9x2,3 m

Condition: good (used), Year of construction: 2014, spindle turning speed range 170 - 18000 U/min weight of the machine ca. 7,5 t dimensions of the machine ca. 5,00 x 4,00 x 2,20 m --> Control conversion (2014) to Siemens Sinumerik 840D Solutionline --> Overhaul of the new control system in 2016 --> Technical data Grinding diameter: 20 - 300 mm --> Oscillation diameter: 350 (500) mm --> Workpiece length: 300 (1300) mm --> Recommended grinding depth up to: 300 mm --> Grinding table stroke Z-axis (total): 650 (950) mm --> Resolution: 0.001 mm --> Rapid traverse: 12 m/min-1 --> Grinding stroke speed: 0 - 9.99 m/min-1 --> Feed rate: 0 - 99.99 m/min-1 --> Step feed value during reversal: 0 - 0.999 mm --> Grinding table stroke X-axis (total): 150 mm --> Resolution: 0.001 mm / Ø --> Rapid traverse: 5 m/min-1/R --> Grinding stroke speed: 0 - 5 m/min-1/R --> Feed rate: 0 - 99.99 m/min-1/R --> Step feed value during reversal: 0 - 0.999 mm / Ø --> Swivel capability of the workpiece headstock: --> B-axis: -32° (-23°) / +2° --> Resolution: 0.0001° (0.36") --> U-axis stroke (total): 300 mm --> Resolution: 0.001 mm / Ø Hjdsw Intajpfx Ak Dsl --> Travel speed: 5 m/min-1 --> Centre height above workpiece table: 200 (300) mm --> Centre height above grinding table: 330 (430) mm --> Workpiece spindle passage: 50 (70) mm --> new in 1988

Condition: good (used), Year of construction: 1984, max. wheel diameter 250 mm gear width 275 mm max. module 6 weight of the machine ca. 5,5 t The gear hobbing machine ZFWZ 250 is suitable for the economical production of all hob-processable cylindrical gear types, such a: - spur and helical gear, wormgears and worms, splined shafts, keyed shafts, serrated profiles, chain wheels and ratchet wheels,as well as conical and Hjdpfx Akev T Nqae Dsl crowned spur and helical gears. Interchangeable wheels and milling accessories Technical data: - Workpiece diameter (max): 250 mm - Module (max): 6 mm - Axial feed travel (max): 275 mm - Tangential feed travel (max): 100 mm - Tooth helix angle (max): 45 degrees - Milling cutter diameter (max): 145 mm - Milling cutter length (max): 170 mm - Table clamping surface (min): 195 mm - Table clamping surface (max): 470 mm Power Milling cutter speeds - Stepped in 2 ranges: 56 ... 250 rpm - (Standard version): 90 ... 400 rpm - Infinitely variable in 2 ranges: 63 ... 180 rpm - (special version DC motor): 140 ... 400 rpm Weights - Machine net: approx. 5000 kg - Electrical cabinet: approx. 800 kg - Hydraulic unit + coolant tank + chip transport: approx. 700 kg Overall dimensions (with oil mist filter) - Length: Standard version: 3950 mm DC drive: 3450 mm (or 3350 mm according to table) - Width: 3300 mm - Height: Machine: 1980 mm Machine with DC drive: 2150 mm Electrical cabinet: 2200 mm

Condition: used, Year of construction: 1989, max. wheel diameter 400 mm gear width 275 mm max. module 6 Overall size 300x310x245 cm weight of the machine ca. 5,0 t Specifications: - Maximum wheel diameter: 400 mm - Min. module: 1 - Max. module: 6 - Table diameter: 370 mm - Maximum wheel diameter: with counter support: 340 mm / without counter strut: 400 mm - Max. axial offset: 275 mm - Max. tangential adjustment: 100 mm - Max. tooth helix angle: 45 degrees - Max. cutter diameter: 145 mm - Max. hob length: 170 mm Performance - Cutter speed: 50-200 rpm - Axial feed continuously adjustable: 0.2-10 mm/rev - Tangential feed continuously adjustable: 0.1-5 mm/rev - Radial for spur gears: 0.1-4 mm/rev - Radial for worm gears: 0.025-1 mm/rev - Rapid traverse axial: 500 mm/min - Rapid traverse tangential: 250 mm/min - Radial for spur gears: 400 mm/rev - Radial for worm gears: 100 mm/rev - Motor power: 7.4 kW Gewicht - Machine 5000 kg - Electrical cabinet approx. 800 kg - Hydraulic unit, coolant tank, chip conveyor approx. 700 kg Hedpju A I Elofx Ak Dsl Dimensions - Length with chain drive (normal) 2950 mm with DC drive 3350 mm - Width: 3100 mm - Height Machine: 1980 mm Electrical cabinet approx.: 2200 mm Machine with DC drive approx.: 2150 mm

Condition: good (used), max. wheel diameter 630 mm gear width 375 mm max. module 10 clamping table 550 mm table hole 125 mm milling spindle speeds infinitely variable 62 - 390 U/min taper MORSE 5 axial-feeds 0,40 - 6,80 mm/U Hjdpfx Akjua It Us Djl radial feeds 0,10 - 1,76 mm/U dist. cutter spindle - workpiece spindle 50 - 425 mm no. of teeth min. 8 milling cutter dia. x width 192 / 215 mm shifting 200 mm main drive motor 7,5 kW total power requirement 21 kVa weight of the machine ca. 8,2 t Equipment of the machine: - Universal milling head with tangential displacement - Pressure reducing valve for counterholder - Magnetic chip transport - Year of construction approx. 1976

Year of construction: 2001, condition: good (used), table diameter 200 mm workpiece height 100 mm number of wheels 1 Control Robot CNC Hjdpfx Akjtt Tb Ds Dol total power requirement 6 kW weight of the machine ca. 1,8 t dimensions of the machine ca. 1,83 x 2,04 x 2,1 m Technical data - Grinding capacity : Ø 0.025 –12.7 [mm] - Bar diameter : Ø 1.0 –12.7 [mm] - Grinding length : W15 (option W20) - Z-axis : 35[mm] Resolution : 0.5 [µm] – X- axis : 25 [ mm] Resolution : 0.1µm – Y-axis : 286[mm] Resolution : 0.5µm – U- axis : 15 [mm] Resolution : 0.1µm Head Motor: 0.70 [kW] Rotation: 300 – 3000 [rpm] Grinding - Raw grinding : 1.5 [kW] Spindle : Ø 60 [mm] Grinding wheel diameter : Ø 200 [mm] Cutting speed : 30 m/sec. - Completion: 0.75 [kW] Spindle: Ø100 [mm] Grinding wheel diameter: Ø150 [mm] Cutting speed: adjustable - Dimensions (L x W x H): 1830 x 2040 x 2100 mm - Weight: approx. 1800 [kg] Accessories - Loading and unloading robots - Fire protection device CONTROL axes; 4 axes + 2 programmable robots - simultaneously linear interpolation of the 4 axes + cylindrical interpolation of 2 robot axes

Condition: used, max. wheel diameter 180 mm gear width 45 mm max. module 4 min. module 0,5 stroke length max. 0 - 52 mm spindle taper innen MK 4 Hjdpfx Akotycg So Del table diameter 160 mm table bore diameter 75 mm no. of strokes 355 - 630 Hub/min feed range 0,008 - 0,4 mm/Hub dimensions of the machine ca. 2,30 x 1,50 x 2,36 m power capacity 6 kW weight of the machine ca. 2.500 kg With rack and pinion unit Change gear set Year of construction: Approx. 1981

Year of construction: 1979, condition: good (used), Flat grinding machine make Brand Hedpfx Akoy H Ibis Del Type: Compact 600/800 with Heidenhain control We do not have any further technical data.

Condition: good (used), Year of construction: 1993, with oil filtration unit Unfortunately, we do not have any further technical data available. Transport and loading can be organised throughout Europe at an additional cost upon request. Prices are subject to VAT. Inspection is possible by appointment. Please contact us—our team will be happy to assist you. Machinery Purchasing / Sales Hodoy H H Hqopfx Ak Del PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, ETC. Do you need a high-quality yet affordable machine for your manufacturing shop? Or are you looking to sell your equipment? For further information or contact options, please use the contact form.

Condition: good (used), Hydraulic Center height 130 mm Distance between centers 400 mm Tablesize 900 x 200 mm Grinding head turnable 360° Grinding spindle speeds 2'200 - 6'400 rpm Hjdpfoy H Dr Djx Ak Dol Misc. accessories MARCELS MASCHINEN AG

Condition: excellent (used), with internal grinding attachment Center height 125 mm Distance between centers 1000 mm Table size 1650 x 145 mm Grinding wheel 400 x 50 x 127 mm Hsdpsy H Dq Hofx Ak Del Grinding wheel speeds 1'500 - 2'200 rpm Grinding head turnable 270° Grinding wheel 225 x 20 x 76.2 mm Misc. accessories MARCELS MASCHINEN AG

Condition: used, Year of construction: 1999, operating hours: 10,506 h, functionality: fully functional, grinding length: 1,200 mm, grinding width: 450 mm, Grinding length: 1,200 mm Grinding width: 450 mm Max. distance grinding wheel to magnet: approx. 400 mm Magnetic chuck: 1,200 x 500 mm Max. grinding height: 400 mm Hodpfxsy H A Nbe Ak Del

Condition: used, Year of construction: 2001, Technical details: grinding diameter max.: 3-220 mm regulating wheel width: 400 mm max. width of grinding wheel: 400 mm grinding motor: 55 kW peripheral speed: max. 45 m/sec regulating wheel dimensions: 350 x 400 x 203 mm dimensions of grinding wheel: CBN 500 x 400 x 304 mm grinding wheel size: KORUND 600 x 400 x 304 mm total power requirement: 75 kVA weight of the machine ca.: 13 t. dimensions of the machine ca.: 4,47 x 2,77 x 2,49 m. Centerless Grindign Machine JUNKER JUPITER 500 CNC SIEMENS in good condition. Including: · 2 robots Kuka KR 16 Year 2007 · CNC loading and unloading device Promot EPL60NC Year 2007 The machine was lately used for grinding of guide bushes (through grinding). Plunge is possible. JUPITER's Centerless grinding, also available with CBN. Junker this circular grinding method with CBN grinding wheels, which opens up significant productivity benefits from the long service life of the grinding wheel, especially at high volumes. In addition, the simultaneous removal takes on the entire Schleswig-Holstein, which provides both in mass production and in small batches for significantly reduced processing times. The grinding process with JUPITER When centerless grinding, there are two grinding processes: the through grinding and plunge. Both methods are possible with the JUPITER. Applications through grinding: Pin and Bushings Body, rings, smaller rings, piston parts (eg compressors), waves with constant diameter piston rods (eg shock), Small piston for hydraulic and fuel injection, precision wires and rods, piston pins. Applications Plunge: Rotor shafts, transmission parts, bearing surfaces of camshafts, tube and pipe fittings for composite camshafts, universal joints, parts for needle injection, valve stems, barrel rolls. Hjdjttxg Ijpfx Ak Dol *

Condition: used, Year of construction: 1996, Technical details: grinding length: 1370 mm grinding width: 560 mm workpiece height: 800 mm total power requirement: 50 kW dimensions of the machine ca.: 9 m ABA Z&B 2000, profile grinding machine with swivel dresser Mounting fixtures: magnet, dividing head Hedpfjw S Hy Hjx Ak Del E-axis dresser B-axis dividing head *

Condition: good (used), Code: 0345 Brand: STROMAB Model: KGS 650 - CE Standard Automatic knife grinding machine for planer knives, knife blades and straight tools – CE Standard Technical data: Hsdpfxoyxf Tts Ak Del Max working length 650 mm Grinding motor power 0,75 Hp External diameter of the grinding wheel 127 mm Grinding wheel feed per stroke 0,01/0,05 mm Carriage feed motor power 0,15 Hp Carriage feed speed 12,5 mt/min Tilting grinding wheel motor unit Base with tool storage shelves Overall dimensions mm 1200 x 500 x 1300 h Weight kg 103

Condition: excellent (used), functionality: fully functional, workpiece weight (max.): 10,000 kg, grinding length: 6,000 mm, grinding diameter: 800 mm, Cylindrical Grinding Machine STANKOIMPORT 3M196 / 6000 We offer a heavy-duty cylindrical grinding machine from STANKOIMPORT, model 3M196 / 6000. The machine is designed for machining large and heavy workpieces and is suitable for heavy industry, energy sector, shipyards and shaft production. 🔧 Technical data: Manufacturer: STANKOIMPORT Model: 3M196 / 6000 Grinding length: 6000 mm Grinding diameter: 800 mm Center height: 410 mm Max workpiece weight: 10,000 kg Grinding wheel diameter: 750 – 900 mm Spindle taper: Morse 6 Dimensions (L x W x H): 12,000 x 3,000 x 2,500 mm Machine weight: 45,000 kg 📌 Description: Heavy-duty and rigid construction Suitable for continuous industrial operation Ideal for long shafts and large components Proven and reliable design 📍 Location: Poland Hedpfx Akjy Hrr Sj Dol 🚚 Terms: Price: on request Machine can be inspected Loading included Transport can be arranged

Condition: good (used), Internal Item No.: 26041 Drill Bit Grinding Machine REMA Model: S2/40 Power: 0.9 kW / 380V Hedoy Hr R Uspfx Ak Del 2900 rpm Including accessories Dimensions (LxWxH): 100 x 70 x 120 cm Weight: approx. 200 kg The machine is fully operational and can be inspected under power, by appointment, in over 500 m² of heated storage space.

Condition: used, This Epple metal belt grinding machine; model: BSM 75 A, is being auctioned online in our industrial auction / machinery auction of company equipment from ZINK NFZ GmbH & Co. KG. Hedpfoy Hqn Eox Ak Del

Condition: used, Year of construction: 1998, Technical details: grinding diameter: 250 mm grinding length: 2710 mm max. module: min. module: total power requirement: 45 kW weight of the machine ca.: 15 t Hedpfsudf E Aox Ak Dsl space required L x W X H: 7,1 x 4,7 x2,7 m max. wheel dia.: 450 mm Spindle drives Arena Siemens For Worm grinding we have not module, but pitch. Pitch is freely programmable from 0.001 to big value i.e. 500mm *

Condition: used, Year of construction: 1963, Technical details: max. wheel diameter: 900 mm max. module: 10 weight of the machine ca.: 8200 kos. hob dia. - max.: 190 mm cutter length max.: 320 mm milling spindle speeds (infinitely variable): 13-80 U/min workpiece length - max.: 750 mm Hedpevkpu Hsfx Ak Dol max. workpiece diameter: 150 mm Counter holder milling mandrel is missing *

Condition: used, JONES SHIPMAN 1305 EIU CYLINDRICAL GRINDING MACHINE MAKE JONES AND SHIPMAN, MADE IN ENGLAND MODEL 1305 EIU CENTRE HEIGHT 185.0 mm MAX DIAMETER 370.0 mm MAX GRINDING LENGTH 1016.0 mm MAX GRINDING WHEEL 350.0 mm x 40.0 mm GRINDING SPEED 40 – 320 RPM TABLE ROTATION 16 DEGREE TO – 12 DEGREE MAX INTENAL SPINDLE SPEED 24,000 RPM PLUS HEIDENHAIN DRO INTERNAL SPINDLE ATTACHMENT EXTENSIVE RAGE OF TOOLING AND ACCESSORIES Hedpfxsy Hi Epo Ak Djl RANGE OF MAGNETIC CHUCKS PENDANT CONTROL HYDRAULIC PACK CLEAN

Condition: used, Year of construction: 2017, SCHIATTI FPS SME 8 – Year 2017 Hjdsy Hhkwopfx Ak Dsl STRAIGHT GRINDING MACHINE, 8 Wheels Minimum workable size: 80 x 80 mm Thickness: 3–30 mm Speed: 0.5 – 5.5 m/min Power: 14 kW Variable angle: 0–45° 180,000 linear meters processed

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Hodpjvvkipjfx Ak Dsl

Condition: used, Year of construction: 2022, Oscillating cylinder grinding machine – technical specifications: A possible screwed version for spindle sleeve clamping. Something similar to the ProLoc device is used. Storage location: Nattheim. Hsdpfx Akowhqprs Djl