Used Lehnhoff Planierlöffel Cp 10 / Ms08 / 1.200 Mm / Neu for sale (87,201)

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf uprights, height 3,500 mm with foot parts each 1,200 mm 24 cantilevers with 1,200 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilevers per upright and 2 foot parts with a depth of 1,200 mm, standard = 4 storage levels one above the other per stand side - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. Hnodpfx Agsmkixwjmon The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. Hnedpfx Agemhh Dtemjn The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: new, axle configuration: 3 axles, tire size: 385/65R225, color: silver, Year of construction: 2026, Fully equipped: - Lift axle - Aluminium floor 10 mm - Small door in front wall - Rotatable crossbeam = Further information = Year of manufacture: 2026 Axle brand: BPW Rear axle 1: Tyre size: 385/65R225; Lift axle; Tyre tread left: 100%; Tyre tread right: 100% Hsdpfx Ajyyn I Ajgmenn Rear axle 2: Tyre size: 385/65R22.5; Tyre tread left: 100%; Tyre tread right: 100% Rear axle 3: Tyre size: 385/65R22.5; Tyre tread left: 100%; Tyre tread right: 100% Unladen weight: 8,022 kg Payload: 33,978 kg Gross vehicle weight: 42,000 kg Please contact Mark van der Steen for further information.

Condition: used, maximum load weight: 28,070 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 08/2020, next inspection (TÜV): 03/2027, loading space volume: 92 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Knapen Walking Floor K100 92m³ 10mm Floor New TÜV, brakes, air bellows, etc. replaced General Info • Manufacturer: Knapen Trailers • Model/Type: K100 A5060 • Year of manufacture: 2020 • Chassis number: XPNK0C100LD071956 202003-0071956-r_order-configur? • Country of registration: Germany • Unladen weight: approx. 7,924 kg 202003-0071956-r_order-configur? • Gross vehicle weight: 36,000 kg 202003-0071956-r_order-configur? • Max. axle load: 24,000 kg • Max. king pin load: 12,000 kg (permitted in country of registration) • Volume: approx. 91.9 m³ • Tapered walking floor trailer • Axle design: rigid?rigid?rigid --- Dimensions • External length: 13,670 mm • External width: 2,550 mm • External height: 4,000 mm • Internal height front: 2,690 mm • Internal height rear: 2,785 mm • Fifth wheel height: 1,150 mm • King pin to 2nd axle: 7,750 mm • Axle distance 1st-2nd axle: 1,310 mm • Axle distance 2nd-3rd axle: 1,310 mm --- Axles & Chassis • 3 x SAF 9 t Intradisc+ Integral CD Off-Road axles • All axles rigid • Disc brakes Ø 430 mm • 10-hole wheel connection • Air suspension with standard control panel left in front of axles • Lift axle, fully automatic via EBS • Start assist included (3x braking) • Radio remote control for lift axle --- Tyres & Rims • Goodyear KMAX T • Tyre size: 385/65 R22.5 • Steel rims 22.5" x 11.75 • 6 wheels total • No spare wheel --- Body • Closed side walls left and right • Moving partition wall (min. ground clearance 100 mm) • Rear doors with external locking bars • One locking bar per door • Upper steel belts, left and right swiveling • Platform at front wall • Ladder on front wall left and right • Standard roof bows Ø 60.3 mm (4 units) • Bow storage: 3 x approx. 4,100 mm • Tarp 680 g/m² (RAL 9006 White Aluminum) • Tarp supports 3-position (4 units) • Lashing straps (4 units) --- Floor / Walking Floor • Cargofloor system CF-500 SL-C • Electric control • Ribbed aluminium floor boards 10 mm (21 boards) • Fixed front plate • Stainless steel plate at rear under floor --- Attachments • JOST landing legs with stroke equalization • Plastic toolbox left in front of axles (1000 x 500 x 500 mm) • 30 l water tank with soap dispenser • Closed side underrun protection • Swiveling mud flaps • Anti-spray mat on 3rd axle • Long stairway with extendable rear steps and platform • 2 x wheel chocks left • Broom and shovel holder right --- Lighting • 6 x round LED taillights (3-chamber) • LED fog and reversing lights • LED side marker lights (4 pairs) • LED marker lights at rear Hnjdpfxeyxa Eks Agmon • Reflective contour markings according to EU regulations • LED work lights at rear (remote controlled) • LED work lights at landing legs (remote controlled) • LED LCG-2 switch unit --- Hydraulics/Connections • ISO-N and ISO-S connectors + 15-pin socket • Knapen Trailers V1 radio remote control • Hydraulic connections centrally at front wall (vertical) • Pressure line left, return line right • Additional hydraulic connections at landing legs • Brake connections present • Acoustic reversing signal (manually adjustable) --- Paintwork • Superstructure in RAL 7011 Iron Grey • Wheel hubs in RAL 2008 Bright Red Orange • Chassis and underside unpainted For further information, please feel free to contact me.

Year of construction: 2000, condition: refurbished (used), The FKS-10CP suppository filling, cooling and sealing equipment for pre-formed moulded plastic packaging for suppositories. In the year 2019 the plant mechanically and electronically was completely overhauled is as new. Hedpofc I Hasfx Agmonn Before delivery the plant is test-run using suppository, casings supplied by CP-Citopac GmbH More technical details you found in the Datasheet.

Condition: new, 🧰 Product Features • Condition: New • Colour: grey • Material: Metal • External dimensions: 124 x 83.5 x 97 cm • Internal dimensions: 120 x 80 x 80 cm • Load capacity: 1500 kg • Stack load: 6000 kg • Weight: 78 kg • Front side: foldable • Base: sheet metal base with wooden insert 💰 Price €149 net excl. VAT from 50 pcs. €129 net excl. VAT • Quantity discount: on request • Shipping: Europe-wide on request Hodjdiyhxepfx Agmenn • Delivery time: Immediately available • Inspection and collection: possible at any time by appointment Over 5000 linear metres of pallet racks from various manufacturers always in stock (Subject to change and errors in technical data, information and prices as well as prior sale! See our General Terms and Conditions, all prices excl. VAT ex stock.)

Condition: used, empty load weight: 8,020 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 09/2023, loading space volume: 92 m³, suspension: air, tire size: 385/65 R22.5, Equipment: ABS, truck registration, | Knapen K100/KT01 Walking Floor | Remote control | Roll-up tarpaulin, operator platform | BPW axles with disc brakes | 1 lifting axle | Tool box | Tare weight: 8,020 kg | Valid inspection report/TÜV until 09/26 | Errors, typos and prior sale excepted. Hnodpszd Hypefx Agmsn

Condition: used, Flame Heating Device Roland Groß + Söhne GmbH Ring Burner for Preheating Weld Seams, Casting Preheating, etc. Model: 1 x 1" Ionization Serial No.: ALMA Year of Manufacture: 03/20 Connection Voltage: 230 Volt Max. Gas Pressure: 500 mbar Max. Air Pressure: 10 bar Max. Gas Flow Rate: 30 Nm³/h Max. Air Flow Rate: 300 Nm³/h Including 10 Different Flame Ring Nozzles - Flame monitoring by Hans Henning - Hinged ring nozzle made of two half-shells, inner Ø 310 mm, with hose quick-connect coupling and ignition device, outlet at the face side - Hinged ring nozzle made of two half-shells, inner Ø 400 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 490 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 500 mm, with hose quick-connect coupling and ignition device, outlet at the face side - Hinged ring nozzle made of two half-shells, inner Ø 590 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 690 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 690 mm, with hose quick-connect coupling and ignition device, outlet at the face side - Hinged ring nozzle made of two half-shells, inner Ø 800 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 890 mm, with hose quick-connect coupling and ignition device, outlet at the face side - Hinged ring nozzle made of two half-shells, inner Ø 890 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 990 mm, with hose quick-connect coupling and ignition device, central outlet Hsdpfx Agsdz Spwomjnn - Hinged ring nozzle made of two half-shells, arc length 1500 mm, with hose quick-connect coupling and ignition device, central outlet For heating pipes and vessels. For heating steel to welding temperature. Ideal for repair welds and the fabrication of welded assemblies from fine-grain steels. Preheating for powder flame spraying or Sulzer Metco high velocity flame spraying. Gas heating for thermal coating applications.

Condition: new, sheet thickness: 10sheet length: 3200Combo Package: CNC Press Brake & Swing Beam ShearFor precise, efficient, and safe sheet metal processing Hnodpezdwfijfx Agmon We offer you a powerful complete package consisting of a CNC Press Brake (160t / 3200 mm) and a Swing Beam Shear (10 mm / 3200 mm) – perfectly matched for modern metalworking with high precision and productivity. CNC Press Brake – 160 Tons / 3,200 mmWith 4 CNC axes (Y1, Y2, X, R) & CNC-controlled crowning Standard Equipment:Heavy-duty design for precision bending and long service life CNC axes: Y1, Y2, X, and R – for accurate positioning and repeatability Motorized CNC-controlled crowning system for automatic angle correction ZY 68 CNC controller (similar to Delem) – user-friendly and highly flexible Backgauge with linear guides and ballscrew, equipped with 4 fingers 2 front sheet support arms for ergonomic handling Laser safety guard on the upper beam for operator protection Quick-clamp system for upper tools Tooling system: Promecam/Amada, segmented and gooseneck for flexibility Multi-V die system – compatible with Promecam and Amada CE-compliant safety equipment Swing Beam Shear SWC 3200 x 10 mmWith NC control and motorized backgauge Technical Specifications:Sheet thickness: up to 10 mm, cutting length: 3,200 mm Cutting angle: 1.30°, Motor power: 15 kW Motorized backgauge: up to 1,000 mm Dimensions: L 3,800 × W 1,820 × H 1,920 mm Weight: 7,700 kg Equipment:Swing beam design for clean and accurate cuts NC control ELGO P40 T, with front-side operation including blade gap adjustment Hydraulic hold-downs positioned close to the cutting line User-friendly control panel on a swivel arm Foot pedal, blade gap adjustment & cutting line illumination Wide sheet support table with ball transfers, 2 front support arms with T-slot Flip-up finger guard, 1 side gauge with T-slot Upper blade reversible 2 times / Lower blade reversible 4 times Adjustable cutting length for efficient operation Qualified customer support, operating manual in English Machine and equipment comply with CE regulations Your Benefit – All-in-One Solution:Perfectly matched machines Time and cost savings through combined package Ideal for workshops, metal fabricators, and job shops Contact us now for a non-binding offer!

Condition: new, sheet thickness: 10sheet length: 3200Combo Package: CNC Press Brake & Swing Beam ShearFor precise, efficient, and safe sheet metal processing We offer you a powerful complete package consisting of a CNC Press Brake (160t / 3200 mm) and a Swing Beam Shear (10 mm / 3200 mm) – perfectly matched for modern metalworking with high precision and productivity. CNC Press Brake – 160 Tons / 3,200 mmWith 4 CNC axes (Y1, Y2, X, R) & CNC-controlled crowning Standard Equipment:Heavy-duty design for precision bending and long service life CNC axes: Y1, Y2, X, and R – for accurate positioning and repeatability Motorized CNC-controlled crowning system for automatic angle correction ZY 68 CNC controller (similar to Delem) – user-friendly and highly flexible Backgauge with linear guides and ballscrew, equipped with 4 fingers 2 front sheet support arms for ergonomic handling Laser safety guard on the upper beam for operator protection Quick-clamp system for upper tools Hnjdpfjwnz Apex Agmjn Tooling system: Promecam/Amada, segmented and gooseneck for flexibility Multi-V die system – compatible with Promecam and Amada CE-compliant safety equipment Swing Beam Shear SWC 3200 x 10 mmWith NC control and motorized backgauge Technical Specifications:Sheet thickness: up to 10 mm, cutting length: 3,200 mm Cutting angle: 1.30°, Motor power: 15 kW Motorized backgauge: up to 1,000 mm Dimensions: L 3,800 × W 1,820 × H 1,920 mm Weight: 7,700 kg Equipment:Swing beam design for clean and accurate cuts NC control ELGO P40 T, with front-side operation including blade gap adjustment Hydraulic hold-downs positioned close to the cutting line User-friendly control panel on a swivel arm Foot pedal, blade gap adjustment & cutting line illumination Wide sheet support table with ball transfers, 2 front support arms with T-slot Flip-up finger guard, 1 side gauge with T-slot Upper blade reversible 2 times / Lower blade reversible 4 times Adjustable cutting length for efficient operation Qualified customer support, operating manual in English Machine and equipment comply with CE regulations Your Benefit – All-in-One Solution:Perfectly matched machines Time and cost savings through combined package Ideal for workshops, metal fabricators, and job shops Contact us now for a non-binding offer!

Condition: good (used), Year of construction: 1990, 1 used surface grinding machine make Rosa type ER 10 year of construction 1990 Technical data Travel 1000 x 600 mm Magnetic plate 1000 x 600 mm maximum sanding height 400 mm Hsdpsuuik Sjfx Agmsnn longitudinal speed 2-30 m/min Transverse speed infinitely variable 0-3 m/min Sanding spindle speed 1450 rpm Grinding wheel diameter 400 x 60 x 127 mm Grinding wheel motor power 7.4 KW Dimensions 3900 x 20 50 x 2400 mm Weight 6 tons

Condition: new, Year of construction: 2024, Hydraulic shear MVD I-SHEAR C 3100 - 10 complete with pneumatic rear sheet metal support. CNC ESA S 625 TOUCH SCREEN CUTTING ANGLE ADJUSTMENT AUTOMATIC INTERSPACE-BLADE ADJUSTMENT Material cutting capacity 450N/mm2 10 mm Material cutting capacity 700N/mm2 6 mm Cutting length 3100 mm Distance between shoulders 3600 mm Hodpfx Agjfh R Ilemsnn Variable cutting angle 0.5 - 3 ° Blade press cylinders 14 Strokes per minute 7 - 13 Hollow 250 mm Motor power 22 kw Millimeter square and two sheet supports 1000 mm Rear register stroke 1000 mm with PNEUMATIC SHEET SUPPORT. Approximate weight : 10.5 Ton

Condition: used, Year of construction: 1983, Hydraulic Shear HACO HS 3010 Hjdpszdiiuofx Agmsnn Capacity: 3000 x 10 mm Back gear gauge travel: 1000 mm Year of construction: 1983 Manual adjustment of the clearance between blades Cutting angle: 1° to 3° Voltage: 380 V Dimensions (L x W x H): 4000 x 2100 x 2200 mm Weight: approx 8 T

Condition: new, Year of construction: 2026, machine/vehicle number: 2026, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, DGUV certified until: 07/2027, NEW – Unox Bakertop X 10 Digital loading and unloading station. NEW TOP convection oven for 10 trays, 60x40 Exhaust hood on top with smoke condenser Proofing cabinet below for 10 trays, 60x40 Oven is mobile with locking mechanism Hedpfx Agsyaf Dyemonn USB port Only available from us: DGUV V3 certified Connection: 400V, 32A CEE plug Water connection: 3/4 inch, water drain: DN 40 Dimensions: 865 x 1100 x 2200 mm, W x D x H Oven is NEW and SAB certified 12 months warranty + spare parts service Visit our Unox baking station!

Condition: new, Year of construction: 2026, machine/vehicle number: 2026, functionality: fully functional, NEW ++ Unox Lievox X 10 proofing cabinet ++ NEW for 10 trays, 600 x 400 Lighting & glass doors Temperature range up to max. 50 °C Convection & humidity control DGUV V3 tested, exclusively available from us Dimensions: 860 x 1015 x 738 mm, WxDxH 220V connection New unit & SAB tested 12 months warranty + spare parts service Come and visit us! Hodpjyaf Dtsfx Agmenn

Condition: good (used), Short-stroke heavy-duty cylinders, high-pressure hydraulics, compact cylinders, light metal cylinders, high-pressure cylinders, universal cylinders, hydraulic cylinders, straightening cylinders, hydraulic rams, hydraulic pressure cylinders, lifting cylinders, pressure rams, hydraulic short-stroke cylinders, hydraulic flat cylinders -Hydraulic cylinders short-stroke heavy-duty cylinders -Stroke: 10 mm -Piston rod: Ø 70 mm Hsdpfxewuqgke Agmjnn -Number: 3x cylinders available -Price: per piece -Dimensions: Ø 130 x 37 mm -Weight: 3.6 kg/piece

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, warranty duration: 12 months, input voltage: 230 V, DGUV certified until: 07/2027, input current: 2 A, input frequency: 50 Hz, empty load weight: 35 kg, type of input current: AC, power: 0.4 kW (0.54 HP), electrical fuse: 10 A, Dough kneading machine Model: SP 10 Protective cover with shutdown Table machine for max. 6 kg of flour Spiral mixer for max. 10 kg. Dough Infinitely variable speed DGUV V3 tested Connection 230V, 400 Watt, 2 Amp. Weight 35 kg. Dimensions: 300 x 510 x 450 mm, WxDxH Dough machine NEW Hnsdpogu Nfwofx Agmjn with 12 months warranty Come to our large bakery machine park!

Condition: new, maximum load weight: 28,240 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,480 mm, loading space height: 2,820 mm, loading space volume: 91 m³, Equipment: ABS, Stock no. 5559 New vehicle in stock – available immediately! Purchase, rent, or rent with purchase option by arrangement! Side tarpaulin retrofit available at an additional cost! Stas 91 m² moving floor / 10 mm flat floor / TÜV load certificate ---- * Manufacturer: Stas * Model: BIOSTAR – moving floor * First registration: - (New vehicle) * Colour: Chassis galvanized, body RAL 7016 silver grey, tarpaulin SIO 7340 * Volume: approx. 91 m³ (13.50 m long x 2.475 m wide x 2.64 m to 2.82 m high) * Gross weight: 36,000 kg * Unladen weight (as per registration): 7,760 kg * Payload: 28,240 kg * Axles: 3x SAF axles / 1st axle lift / traction assist / disc brakes * Tyres: 385/65 R22.5 new on Speedline Diamond alloy wheels * Wheelbase: 7.85 m * Suspension: ECAS air suspension with raise and lower function * ABS / EBS * Cargo Floor CF 500 SL-C floor with remote control and control panel at rear left * 21 floor planks, 10 mm flat * 12 pairs of recessed lashing rings in floor * Welded aluminium end caps * Residual emptying wall with brushes and stainless steel handles * Service door in front wall * Swing doors (50/50) with pneumatic locking * 2x locking rods * Swingable rear door cross member * Hydraulic connections at the front with 3 m hoses and * Additional connection beneath body without hoses * Control platform with steps at front left * Fifth wheel height: 1,150 mm * Single wheel fenders * Full-load support legs * One-piece, foldable aluminium rear light guard * Roll tarpaulin (900g/m²) with tension belts Hnsdpfsv Emk Ujx Agmen * Foldable steel hoops and longitudinal tension belts * 1x toolbox at rear left * 1x aluminium ladder, 3.80 m long * Load pressure gauge * Smartboard * TPMS tire pressure monitoring * Aluminium rear impact guard * 1x extendable ladder at rear right * 2x LED work lights in front of the axles * 2x LED reversing lights at rear * 1x LED work light on interior front wall * 2 x 3-function lamps on upper rear door cross member New vehicle in stock – available immediately! Purchase, rent, or rent with purchase option by arrangement! Notice regarding possible inaccuracies in the listing: Although this listing has been carefully prepared, errors or inaccuracies in the information may occur. No liability is accepted for errors, changes, or prior sale. All information is non-binding. Please contact us to verify details or clarify any questions.

Condition: used, maximum load weight: 30,850 kg, overall weight: 36 kg, axle configuration: 3 axles, first registration: 09/2019, Year of construction: 2019, Equipment: ABS, Kraker CF-200 moving floor trailer, approx. 92 m³, SAF axles, lift axle, air suspension, disc brakes, platform, roll-up tarp, remote control, EBS, ABS Hsdpsyyt Emefx Agmjnn

Condition: new, functionality: fully functional, power: 11.8 kW (16.04 HP), gearing type: automatic, fuel type: diesel, operation weight: 2,000 kg, drive condition: 100 %, chain condition: 100 %, number of seats: 1, shovel volume: 0.025 m³, Year of construction: 2025, operating hours: 5 h, Equipment: adjustable chassis, cabin, hydraulics, parking heater, rubber tracks, 💥 ONLY UNTIL END OF THE MONTH: 10% DISCOUNT ON THE COMPLETE SET! 💥 HT20 PRO PROMOTIONAL PACKAGE – ACT NOW & SAVE! Instead of €13,500 net, now only €12,150 net Are you looking for a compact, powerful, and ready-to-use mini excavator at an especially attractive price? Then the HT20 PRO is exactly the right choice. Hnsdpfex Hvvhsx Agmsn Take advantage of our limited end-of-month promotion and secure a fully equipped set with a 10% price advantage. ⭐ YOUR BENEFITS AT A GLANCE ✔ Genuine Kubota D902 engine – reliable, efficient, and durable ✔ Precise load-sensing hydraulics for clean and efficient operation ✔ Comfortable cabin with air conditioning and heating ✔ Adjustable undercarriage – ideal for confined sites ✔ Robust and stable steel construction for professional daily use 🔥 PROMOTIONAL OFFER UNTIL THE END OF THE MONTH The package includes: ✅ HT20 PRO mini excavator ✅ Hydraulic quick coupler ✅ 3 buckets included This gives you a ready-to-use complete solution with attractive features and maximum flexibility for your construction site. ⚙️ TECHNICAL DATA Kubota D902 Diesel 3 cylinders Power: 11.8 kW Operating weight: 2,000 kg Transport length: 2,850 mm Width: 1,220 mm Height: 2,350 mm Max. digging depth: 2,060 mm Max. reach: 3,130 mm Max. dumping height: 2,875 mm 🚀 AVAILABLE IMMEDIATELY ✔ Machine in stock ✔ Ready for operation upon delivery ✔ Delivery possible throughout Europe ✔ Spare parts and service available locally ✔ 12-month warranty 🎥 ADDITIONAL ADVANTAGES FOR INTERESTED BUYERS ✔ Upon request, we will gladly send you a video of the machine ✔ On-site personal inspection possible ✔ Test operation available by arrangement See for yourself the condition, features, and performance before you buy. ✅ WHY THIS PROMOTION? ➡️ 10% discount on the complete set ➡️ High-quality professional features included ➡️ Immediately available and ready for work ➡️ Transparent advice and individual support ➡️ Only for a limited time until the end of the month 📍 LOCATION Rheda-Wiedenbrück ⏳ INQUIRE NOW AND SECURE THE PROMOTIONAL PRICE 👉 Contact us now and secure your promotional package with 10% discount – only until the end of the month! 👉 Video available on request – inspection and test run always possible by appointment.

Condition: new, We offer here for sale a new workbench from the manufacturer Metal Sistem. Delivery time: approx. 3 - 4 weeks Technical data of the workbench: Manufacturer: Metal Sistem Type: Super 4/5/6 Hnjdpfx Agjhq Txhemon Workbench width: 1.200 mm Workbench depth: 900 mm Workbench height: 900 mm Included in delivery: 02x workbench stand, new Material color: compl. galvanized type of stand: TS4 incl. cross and diagonal braces, foot plates The stands are pre-assembled (bolted truss) 723 mm high 700 mm deep 04x workbench trusses, new Crosshead type: TS profile dim.: 70 x 42 x 3 mm clear width: 920 mm Material color: compl. galvanized 01x worktop, new Wood type: MDF thickness: 28 mm dimension: 900 x 1.200 mm Material color: black 03x steel shelves, new dimension: 300 x 700 mm Type: H29/D 02x swivel castors, new 02x brake/steering rollers, new 01x angle set, new for mounting the worktop 08x safety hook, new Material color: compl. galvanized

Condition: new, We offer here for sale a new workbench from the manufacturer Metal Sistem. Delivery time: approx. 3 - 4 weeks Technical data of the workbench: Manufacturer: Metal Sistem Type: Super 4/5/6 Workbench width: 1.200 mm Workbench depth: 900 mm Workbench height: 900 mm Included in delivery: 02x workbench stand, new Material color: compl. galvanized type of stand: TS4 incl. cross and diagonal braces, foot plates Hnodshq Twyspfx Agmjn The stands are pre-assembled (bolted truss) 888 mm high 700 mm deep 04x workbench trusses, new Crosshead type: TS profile dim.: 70 x 42 x 3 mm clear width: 920 mm Material color: compl. galvanized 01x worktop, new Wood type: MDF thickness: 28 mm dimension: 900 x 1.200 mm Material color: black 03x steel shelves, new dimension: 300 x 700 mm Type: H29/D 01x Angle set, new for fixing the worktop 08x safety hook, new Material color: compl. galvanized

Condition: new, We offer here for sale a new workbench from the manufacturer Metal Sistem. Delivery time: approx. 3 - 4 weeks Technical data of the workbench: Manufacturer: Metal Sistem Type: Super 4/5/6 Workbench width: 1.200 mm Workbench depth: 900 mm Workbench height: 900 mm Included in delivery: 02x workbench stand, new Material color: compl. galvanized type of stand: TS4 incl. cross and diagonal braces, foot plates The stands are pre-assembled (bolted truss) 723 mm high 700 mm deep 02x workbench trusses, new Crosshead type: TS profile dim.: 70 x 42 x 3 mm clear width: 920 mm Material color: compl. galvanized 01x worktop, new Wood type: MDF thickness: 28 mm Hsdehq Txwopfx Agmsnn dimension: 900 x 1.200 mm Material color: black 02x swivel castors, new 02x brake / swivel castors, new 01x angle set, new for mounting the worktop 04x safety hook, new Material color: compl. galvanized

Condition: new, We offer here for sale a new workbench from the manufacturer Metal Sistem. Delivery time: approx. 3 - 4 weeks Technical data of the workbench: Manufacturer: Metal Sistem Type: Super 4/5/6 Workbench width: 1.200 mm Workbench depth: 900 mm Workbench height: 900 mm Included in delivery: 02x workbench stand, new Material color: compl. galvanized Hnsdpfjhq Tqdox Agmjn type of stand: TS4 incl. cross and diagonal braces, foot plates The stands are pre-assembled (bolted truss) 888 mm high 700 mm deep 02x workbench trusses, new Crosshead type: TS profile dim.: 70 x 42 x 3 mm clear width: 920 mm Material color: compl. galvanized 01x worktop, new Wood type: MDF thickness: 28 mm dimension: 900 x 1.200 mm Material color: black 01x angle set, new for fixing the worktop 04x safety hook, new Material color: compl. galvanized

Condition: good (used), We are offering you a second choice crash barrier for purchase. The scope of delivery includes: 01x collision protection guard rail, 2nd choice Hnodehpub Aepfx Agmjn Material color: yellow/black/galvanized Total height: 400 mm Total depth: 180 mm Clear width: 1,200 mm Consists of: 01x CS Sigma profile, 2nd choice Material color: sendzimir galvanized Profile dimensions: C 300 x 75 x 2 mm Length: 1,100 mm 02x L - collision protection corners, new Material color: yellow/black according to DIN standard Total height: 400 mm Leg length: 170 x 170 mm Material thickness: 5 mm Weight/piece: 6.10 kg 08x screws: M12 08x nuts: M12 16x washers: M12 The collision protection guard rail is supplied complete. delivered pre-assembled. General information about the article: This article is only available for collection. Any additional transport or shipping of this article is subject to additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.