Used Kunzmann Wf 4/3 (1998) for sale (93,067)

Condition: new, Year of construction: 2026, machine/vehicle number: EAN0729389556525, load capacity per storage section: 3,000 kg, total length: 44,800 mm, total height: 4,500 mm, load per truss pair (max.): 3,000 kg, number of shelf rows: 4, frame height: 4,500 mm, clear span: 3,600 mm, clearance between the columns: 3,600 mm, frame width: 1,100 mm, shelf height: 4,500 mm, shelf length: 44,800 mm, support length: 3,600 mm, 4 rows of pallet racking (M45113615-3) each 11.3 m long, 4.5 m high, 1.1 m deep, each with 3 bays, 3.6 m wide, each with 3 crossbeam levels, load capacity per bay 3000 kg. - 16 frames (RM4511 - RAL5019) Pjdjzrr Nfopfx Afuogr - 32 base plates, shims, screws - 64 floor anchors (ZZBA1210) - 72 single crossbeams, 3.6 m long (T3615 - RAL2008) - 4 load capacity signs (BSMcP) Frames are bolted together, not pre-assembled. Freight/Delivery: - max. 20 working days after receipt of payment - delivery free to construction site/assembly location - unloading from the truck is carried out by the buyer using their own lifting equipment - deliveries are made throughout the Federal Republic of Germany; excluding islands! Deliveries to EU countries are possible by individual agreement.

Condition: used, CNC Tool Milling Machine MIKRON Type WF 40C/3M with Heidenhain TNC 310 CNC path control Machine No. 440911 Year approx. 1985, overhauled and control retrofit in 11/2000 Travel distances X: 600 mm Y: 600 mm Z: 460 mm Table size 900 x 550 mm Spindle taper ISO 40 Distance spindle nose - table max. 520 mm Spindle speed 31.5 - 3150 rpm, 21 steps Feed rate 1 - 2000 mm/min. Rapid traverse speed X and Y = 5000 mm/min; Z = 4000 mm/min Quill stroke 100 mm Main spindle drive 4 and 5 kW Power connection 400 Volt, 50 Hz, 10.5 kW, 25 Amp. - CNC path control Heidenhain TNC 310, NC software: 286140 07, PLC software: MIKR1 - Spindle speed via 21 gear steps - Vertical milling head swivels left and right - Hydro-mechanical tool clamping vertical and horizontal - Central lubrication - Electronic handwheel - 62,815 operating hours shown - Control cabinet permanently attached to the machine rear - Coolant system integrated in the machine base - Swiveling operator panel - Electrical diagram, control manual available Space requirement L x W x H 2300 x 2000 x 2150 mm Weight 2900 kg Good condition Pgsdpfxsw A Af Ij Afuer

Condition: good (used), Year of construction: 1998, load capacity: 2,500 kg, lifting height: 4,400 mm, fuel type: diesel, mast type: triplex, construction height: 2,100 mm, Yang FD-25 Triplo 440 Freelift / 3rd function, Isuzu Diesel, 1998 A video can be sent via WhatsApp. We have a continuous stock; see our website. Prices are ex works Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without any guarantees (see our general terms and conditions). You can arrange a non-binding appointment for a viewing and/or test drive. Please call beforehand, as we are not always on-site. Van de Wert Trading B.V. Pgodjzqyvqjpfx Afusr Bedrijfsstraat 3 5391 LR Nuland

Condition: new, Year of construction: 2026, machine/vehicle number: EAN0729389556525, load capacity per storage section: 3,000 kg, total length: 44,800 mm, total height: 4,500 mm, load per truss pair (max.): 3,000 kg, number of shelf rows: 4, frame height: 4,500 mm, clear span: 3,600 mm, clearance between the columns: 3,600 mm, frame width: 1,100 mm, shelf height: 4,500 mm, shelf length: 44,800 mm, support length: 3,600 mm, 4 rows of pallet racking (M45113615-3) each 11.3 m long, 4.5 m high, 1.1 m deep, each with 3 bays, 3.6 m wide, each with 3 crossbeam levels, load capacity per bay 3000 kg. - 16 frames (RM4511 - RAL5019) - 32 base plates, shims, screws - 64 floor anchors (ZZBA1210) - 72 single crossbeams, 3.6 m long (T3615 - RAL2008) - 4 load capacity signs (BSMcP) Frames are bolted together, not pre-assembled. Freight/Delivery: - max. 20 working days after receipt of payment Pgjdpezqyn Tofx Afujr - delivery free to construction site/assembly location - unloading from the truck is carried out by the buyer using their own lifting equipment - deliveries are made throughout the Federal Republic of Germany; excluding islands! Deliveries to EU countries are possible by individual agreement.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Kunzmann WF 610 MC tool milling machine with Heidenhain TNC 620 control – in SUPER condition, CE compliant! Technical data: >> Year of manufacture 12/2017, machine no. 610759 >> Fixed angular table >> Speed up to 5000 rpm >> Feed rate, continuously adjustable in 3 axes, from 0 to 2000 mm/min >> Travel ranges X/Y/Z: 610/400/450 mm >> Table surface: 800 x 425 mm >> Table load: 300 kg >> Vertical quill stroke: 70 mm >> Vertical and horizontal quill – SK40 >> Hydraulic clamping system >> Weight approx. 2000 kg >> Space requirement approx.: 1.8 x 1.9 x 2.3 m >> Power: 23 kVA Accessories and equipment: >> Heidenhain TNC 620 control >> Hydraulic clamping, vertical and horizontal >> PC additional keyboard for TNC 620 >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual for the control and programming examples >> Handwheels >> Electronic handwheel HR510 FS >> Coolant system >> Cabin >> Machine feet Pgodszl D S Sopfx Afuor About the machine: Offered is a Kunzmann WF600 MC tool milling machine with a Heidenhain TNC 620 control. This universal milling machine is in very good condition. It features a very user-friendly control system. Furthermore, the machine has hydraulic clamping both vertically and horizontally. Changing from vertical to horizontal configuration is very easy, thanks to the fold-away vertical head. The guideways are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take advantage of the opportunity to inspect and test the Kunzmann on-site while it is powered up.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Tool milling machine Kunzmann WF 600 CNC with Heidenhain iTNC 530 control – CE compliant!! Technical data: >> Year of manufacture 2012, machine no. 610149 >> Fixed angular table >> Speed up to 5000 rpm >> Feed rate, stepless in 3 axes, from 0 to 2000 mm/min >> Travel distances X/Y/Z: 600/400/400 mm >> Table area: 800 x 425 mm >> Table load: 250 kg >> Vertical quill stroke: 60 mm >> Vertical and horizontal quill – SK40 >> Hydraulic clamping system >> Weight approx. 2200 kg >> Space requirement approx.: 2.4 x 2.2 x 2.1 m >> Power 18 kVA Accessories and equipment: Podpfxezl D Ite Afuegr >> Heidenhain iTNC 530 control >> Hydraulic chuck, vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual for the control and programming examples >> Coolant system >> Enclosure >> Machine feet About the machine: Offered for sale is a Kunzmann WF600 CNC tool milling machine with a Heidenhain iTNC 530 control. This universal milling machine is in very good condition. It features a very easy-to-use control system. Furthermore, the machine has a hydraulic chuck for both vertical and horizontal operation. Switching from vertical to horizontal operation is very easy by folding down the vertical head. The guides are regularly lubricated via the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take advantage of the opportunity to inspect and test the Kunzmann on-site while it is powered up.

Condition: new, Year of construction: 2026, machine/vehicle number: EAN0729389556525, load capacity per storage section: 3,000 kg, total length: 44,800 mm, total height: 4,500 mm, clearance between the columns: 3,600 mm, shelf height: 4,500 mm, number of shelf rows: 4, clear span: 3,600 mm, frame height: 4,500 mm, frame width: 1,100 mm, load per truss pair (max.): 3,000 kg, shelf length: 44,800 mm, support length: 3,600 mm, 4 rows of pallet racking (M45113615-3) each 11.3 m long, 4.5 m high, 1.1 m deep, each with 3 bays, 3.6 m wide, each with 3 crossbeam levels, load capacity per bay 3000 kg. - 16 frames (RM4511 - RAL5019) - 32 base plates, shims, screws - 64 floor anchors (ZZBA1210) - 72 single crossbeams, 3.6 m long (T3615 - RAL2008) - 4 load capacity signs (BSMcP) Psdpfx Afozpfa Sjuegr Frames are bolted together, not pre-assembled. Freight/Delivery: - max. 20 working days after receipt of payment - delivery free to construction site/assembly location - unloading from the truck is carried out by the buyer using their own lifting equipment - deliveries are made throughout the Federal Republic of Germany; excluding islands! Deliveries to EU countries are possible by individual agreement.

Condition: used, Year of construction: 1983, functionality: fully functional, feed length X-axis: 460 mm, feed length Y-axis: 200 mm, Universal milling machine Kunzmann UF6/3 Year of manufacture: 1983 The machine is in good condition, and the spindle runs very smoothly. The feed motor has been fitted with new carbon brushes, and the Z-axis spindle has a new telescopic spring. The cam control system in 3 axes is perfect for the production of small series. --- Price net plus VAT (shown on invoice) --- Travel distances, feed/manual - Longitudinal: 450/460mm Psdszmfz Djpfx Afuogr - Transverse: 190/200mm - Vertical: 400/410mm The milling head can be adjusted by approximately 100mm by hand, which increases the transverse working area. Table clamping surface (surface with 3 T-slots): 860 x 265 mm T-slots: 14mm Spindle speeds, horizontal: 30-1280 RPM Spindle speeds, vertical: 50 - 2150 RPM Feeds: 0-1000 mm/min, stepless Feed, vertical: 0-250mm/min Rapid traverse: 1000 mm/min Vertical milling head with fixed quill Tool holder: SK40 (Ott system) Distance, table - spindle lower edge: 440mm Accessories: - Manual - Counter support for horizontal milling - Cam control system in 3 axes (adjustable cams for switching off the feed) - Chip tray Drive power: 2.6/3.2 kW Connection: 400V three-phase Space requirement: approx. 1250 x 1200 x 1800 mm Weight: approx. 1300 kg Shipping by freight forwarder on request.

Condition: good (used), Servo Drive, Servo Card, Input Processor, Control Card, Input Card, Controller, Converter, Controller, Servo Module, Axis Amplifier, Axis Amplifier, Velocity Control Unit, Spindle Amplifier Module, Servo Amplifier -Manufacturer: Bosch, transistor amplifier completely equipped from CNC milling machine Mikron WF 51C/155 Pgjdpswd N S Dsfx Afuor -Type: TR15-XA-140-230V -Control cards/single modules: see photos -Dimensions: 480/260/H365 mm -Weight: 24 kg

Condition: good (used), Permanent magnet motor, electric motor, servo motor, geared motor, three-phase motor -Manufacturer: Siemens, Permanent Magnet Motor from CNC milling machine Mikron WF 51C/155 -Type: HU3074-,0AC01-Z -Voltage: 167 V -Power: 1.8 kW Pedjkxhpuopfx Afuegr -Speed: 2000 rpm -Shaft: Ø 22 x 45 mm -Number: 2x motors available -Price: per piece -Dimensions: 390/140/H185 mm -Weight: 23 kg/pc.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, load capacity per storage section: 3,000 kg, total length: 34,000 mm, total height: 3,500 mm, clearance between the columns: 2,700 mm, shelf height: 3,500 mm, number of shelf rows: 4, clear span: 2,700 mm, load capacity: 9,000 kg, pallet spaces: 108 euro pallets, frame height: 3,500 mm, frame width: 1,100 mm, load per truss pair (max.): 3,000 kg, shelf length: 34,000 mm, support length: 2,700 mm, 4 rows of pallet racking (4 x M35112711-2) each 8.5 m long, 3.5 m high, 1.1 m deep, each with 3 bays, 2.7 m wide, each with 2 crossbar levels, load capacity 3000 kg. - 16 frames (RM3511 - RAL5019) Pedpfxjzk Dtmo Afuegr - 32 base plates, shims, screws - 64 floor anchors (ZZBA1210) - 48 individual crossbars (T27114 - RAL2008) - 4 load capacity signs (BSMcP) Frames are bolted together, not pre-assembled. Freight/Delivery: - max. 20 working days after receipt of payment - delivery free to construction site/assembly location - unloading from the truck is carried out by the buyer using their own lifting equipment. - Deliveries are made to the entire area of the Federal Republic of Germany; excluding islands! Deliveries to EU countries are subject to individual agreement.

Condition: new, Year of construction: 2024, Universal milling and drilling machine Kunzmann WF 610 M with Heidenhain TNC 128 control system Paths X/Y/Z = 610/400/450 mm Speed 1-4500 rpm Power 8.5 kW at 100 % ED Spindle SK40 DIN 69871 (form AD) with tightening bolt DIN 69872 Fixed angle table 800x 425 mm 6 x 14 H7 T-slots coolant device 66 liters electric handwheel HEIDENHAIN HR 510 FS Further technical data is available on request. Pjdsuf Sv Dspfx Afujgr The machine is located at our premises in 71334 Waiblingen-Beinstein, is immediately available and can also be inspected. Please register in advance.

Condition: ready for operation (used), Siemens 6FM1706-3AA20 Positioning/Counting Module WF706 E-Stand A / 3 SN11458, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. Podpei I I D Njfx Afuegr

Condition: new, Year of construction: 2026, machine/vehicle number: EAN0729389556525, load capacity per storage section: 3,000 kg, total length: 44,800 mm, total height: 4,500 mm, clearance between the columns: 3,600 mm, shelf height: 4,500 mm, number of shelf rows: 4, clear span: 3,600 mm, frame height: 4,500 mm, frame width: 1,100 mm, load per truss pair (max.): 3,000 kg, shelf length: 44,800 mm, support length: 3,600 mm, 4 rows of pallet racking (M45113615-3) each 11.2 m long, 4.5 m high, 1.1 m deep, each with 3 bays, 3.6 m wide, each with 3 beam levels, shelf load 3000 kg. - 16 frames (RM4511 - RAL5019) - 32 base plates, shims, screws - 64 floor anchors (ZZBA1210) - 72 single beams, 3.6 m long (T3615 - RAL2008) - 4 load capacity signs (BSMcP) Frames are bolted together, not pre-assembled. Freight / Delivery: - max. 20 working days after payment receipt Pgedpezg Am Defx Afuor - delivery to construction site / assembly location - unloading from the truck is carried out by the buyer using their own lifting equipment - deliveries are made to the entire territory of the Federal Republic of Germany; excluding islands! Deliveries to EU countries are subject to individual agreement.

Condition: like new (used), Year of construction: 2010, The machine comes from the Daimler Benz technical center and has 150 operating hours. X 650 mm Y 500 mm Z 450 mm Table size 1,100 x 600 mm Table load 450 kg Spindle speed range 6,500 rpm Spindle taper SK 40 Tool changer 24 positions Control system Siemens 840 D Total power 20 kW Pgedpotdfbmsfx Afuor Machine weight 5,500 kg Bm9zrnafs87 Space requirement (W x D x H) 2.3 x 3.1 x 2.3 m Condition: very good

Condition: ready for operation (used), Year of construction: 2005, Make: KUNZMANN Psdpfx Ajzawibjfuegr Type of machine: WF 650 Year of manufacture: 2005 Control system: HEIDENHAIN iTNC 530 Machine's weight: 4.000 kg Tool holder: SK40 x-travel: 650 mm y-travel: 500 mm z-travel: 450 mm Speed range: 10.000 U/min max. Table load: 350 kg Overall dimensions: 3,0 x 2,5 x 2,6 m Table dimensions: 900 x 500 mm

Condition: excellent (used), Year of construction: 2014, Kunzmann WF 600 M Tool Milling Machine Kunzmann WF 600 M with Heidenhain TNC 124 Control Year of manufacture 2014 Excellent CONDITION CE-compliant!! Podsy Sihzepfx Afuegr Technical Data: Year of manufacture: 2014 Fixed angle table Spindle speed: continuously variable up to 4000 rpm Feeds: stepless in 3 axes from 0 to 2000 mm/min Travel X/Y/Z: 600/400/400 mm Rapid traverse x/y/z: 5 / 5 / 4 m/min Table size: 650 x 350 mm Table load: 250 kg Vertical quill travel: 60 mm Vertical and horizontal spindle, SK40 Hydraulic clamping system Weight approx. 1700 kg Space requirement approx.: 2.3 x 2 x 2 m Drive power: 12 KVA Accessories and Equipment: Heidenhain TNC 124 control Hydraulic clamping vertical and horizontal Automatic central lubrication Spindle brake Technical documentation, spare parts diagrams, operating manual for the control and programming examples Handwheels, coolant unit, tool holders, vise About the Machine: Offered here is a Kunzmann WF 600 M tool milling machine equipped with a Heidenhain TNC 124 control. This universal milling machine is in very good original condition. It comes from a facility where it was only lightly used for training purposes. The control is very easy to operate. Furthermore, the machine features hydraulic clamping both vertically and horizontally. Converting from vertical to horizontal is straightforward, simply by swinging away the vertical head. The guides are reliably lubricated via central lubrication. The Kunzmann has been mechanically and electrically tested at our facility. Take the opportunity to inspect and test the Kunzmann under power at our premises. You can find more milling machines from renowned manufacturers on our website.

Condition: like new (used), Year of construction: 2024, Used cantilever racking: bolted system in hot-dip galvanized design Scope of delivery: 4 racking uprights, height 3,000 mm, with base section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered, and expansion is possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized Pgsdpfx Afoguk Dkjuer - Racking height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms can be adjusted in height in a 100 mm grid - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm distance - Racking length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical support - Made in Germany - Short delivery time - Collection on site possible Our cantilever racking is manufactured exclusively in Germany. We offer reliable transport with prior notification before delivery. The material is packed in a way that allows for easy unloading. When installed outdoors, the load-bearing capacities are reduced by the wind and snow load. The ground must be made of concrete, level and suitable for dowels, and must be able to withstand the applied loads. The ground conditions and load-bearing capacity, as well as any necessary official permits, must be checked and ensured by the customer. The racking uprights must be anchored in the ground on site; anchoring to the wall is not necessary and not recommended. According to the occupational health and safety association, it is recommended that the racking uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: Bolted system in hot-dip galvanized finish Scope of delivery: 4 rack uprights, height 3,000 mm, with base section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg Pgedpfx Aofdkbhofuor - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in a 100 mm grid - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm distance - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable transport with notification before delivery. The material is packed in a way that facilitates easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The base must be made of concrete, level and suitable for dowels, and must be able to withstand the applied loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity, as well as any necessary official permits. The rack uprights must be anchored in the ground on site; anchoring to the wall is not necessary and is not recommended. According to the occupational accident insurance association, it is recommended that the rack uprights have a minimum of 500 mm overhang from the top edge of the upright on the uppermost storage level.

Condition: used, Year of construction: 1989, x-travel 500 mm y-travel 360 mm z-travel 420 mm control Heidenhain 355 tool taper SK 40 weight of the machine ca. 1,7 t +++++ Pgodpfx Afsh Hrvfsuor Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 3,250 mm, travel distance Y-axis: 1,265 mm, travel distance Z-axis: 120 mm, saw blade diameter: 120 mm, Equipment: CE marking, Dismantling and loading can be handled by the seller! TECHNICAL DETAILS Working area X: 3,250 mm Working area Y: 1,265 mm Working area Z: 120 mm Tool holder: HSK-F63 Tool changer: 10 positions, mounted on the milling head Drilling and sawing units Vertical drilling spindles: 12 Horizontal drilling spindles X-axis: 4 Horizontal drilling spindles Y-axis: 2 Groove milling unit X-direction: 1 Pedpfx Asyddqmofujgr Saw blade diameter: 120 mm Table system Pod and rail table: available Consoles: 6 MACHINE DETAILS Drive data Main motor power: 9.2 kW Total connected load: 15 kW Vacuum pump capacity: 100 m³/h EQUIPMENT Positioning aid Safety mat Digital LED display on the consoles Auxiliary device for tool change Two rows of stops Workpiece supports Handheld control device Pendulum processing CE marking

Condition: good (used), Year of construction: 1998, operating hours: 7,998 h, load capacity: 3,200 kg, lifting height: 4,600 mm, fuel type: diesel, mast type: triplex, construction height: 2,150 mm, Hyster H3.20XML Triplo 460 Freelift / Sideshift Perkins Diesel 1998 Video available via WhatsApp. Ongoing stock; see our website. Prices ex Nuland. Pgjdpfx Afsynh Auousr Van de Wert Trading B.V. maintains a varying stock of machinery, trucks, trailers, and attachments. All our deliveries are at trade prices, sold AS-IS with no warranties. (see our terms and conditions) For a viewing and/or test drive, you can make a non-binding appointment. Please call in advance, as we are not always present on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2003, operating hours: 11,688 h, load capacity: 3,000 kg, lifting height: 4,600 mm, fuel type: diesel, mast type: triplex, power: 44 kW (59.82 HP), empty load weight: 4,680 kg, total height: 2,200 mm, Equipment: 3rd hydraulic function, 4th hydraulic function, lighting, trailer coupling, Linde H30D diesel forklift Year of manufacture: 2003 Psdpfszw Dbdjx Afujgr According to the hour meter: 11,688 operating hours 3-ton lifting capacity 2.2-meter overall height 4.6-meter lifting height 44 kW VW engine - Triple-stage free-lift mast - 3rd and 4th valve for fork carriage - Semi-cabin - Radio and heater - Work lights - Immediately ready for operation - Visually like new! Selling price: €9,500 (net) Affordable delivery also possible!

Condition: used, empty load weight: 5,080 kg, maximum load weight: 18,920 kg, overall weight: 24,000 kg, axle configuration: 3 axles, first registration: 11/2022, next inspection (TÜV): 11/2025, suspension: air, tire size: 265/70 R19,5, Equipment: ABS, Schwarzmüller N Series timber trailer | BPW axles | Air suspension | Tyres: 385/65 R22.5 | Good condition | 4 pairs of stakes | Approx. 6.60m loading area | Drum brakes | Subject to errors and prior sale. Pgjdpjy Th N Hefx Afuer

Condition: used, Year of construction: 1997, incl. 3-roller feed motor: 2.2 kW, electric oscillation, belt speed: approx. 22 m/s, height-adjustable grinding table, table size: 1000 x 350 mm, continuously adjustable pivoting grinding unit from 0 - 45°, angle scale and mechanical lock, fold-up veneer edge sanding device, aluminum sanding shoe, height-adjustable radius sanding table, central dust extraction connection: 140 mm diameter, sanding belt: 3000 x 150 mm. Pgedoy Dd Igspfx Afuor Location: Nattheim