Used Knuth Mf 1V for sale (1,177)

Year of construction: 2017, condition: excellent (used), Control Siemens 828 D Travel X / Y / Z 850/550/550 mm Spindle speed 8000 rpm Tool magazine for 24 tools BT40 Nlodpfx Ajft U S Nomyed Table size 950x550 mm

Condition: used, Year of construction: 1987, bore capacity in steel (diameter) 32 mm throat 280 mm bore stroke 110 mm spindle taper MT 3 table-size 340 x 400 mm turning speeds 210- 2600 U/min Nedjxqrd Hspfx Amyjld total power requirement 1,8 kW weight of the machine ca. 325 kg dimensions of the machine ca. 950 x 450 x 1750 mm

Year of construction: 2006, condition: good (used), functionality: fully functional, machine/vehicle number: 138883, TECHNICAL DETAILS Press force: 160 t Bending length: 4100 mm Distance between uprights: 3100 mm Nodpelp Iq Rofx Amyold Control system: DELEM DA66W Table width: 120 mm Stroke: max. 800 mm Downstroke speed: 80 mm/sec Upstroke speed: 80 mm/sec Speed under load: 8 mm/sec MACHINE DETAILS Oil capacity: 185 l Total power consumption: 24 kW Machine weight: approx. 13 t Space requirement: approx. 4.8 x 2.2 x 2.2 m

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, drilling depth: 315 mm, rotational speed (max.): 2,000 rpm, throat depth: 1,600 mm, drilling capacity: 62 mm, column diameter: 350 mm, TECHNICAL DETAILS Drilling capacity in steel (diameter): 62 mm Thread cutting in steel (St 60): M46 Thread cutting in grey cast iron (GG 20): M52 Maximum drilling depth: 315 mm Machine table dimensions: 2,400 x 1,000 x 200 mm Throat: 1,600 mm Drill head travel (horizontal): 1,250 mm Arm stroke (vertical): 585 mm Column diameter: 350 mm Speed range: 38 – 2,000 rpm Spindle taper: MK 5 Feeds: 0.06 – 1 mm/rev MACHINE DETAILS Nsdsxxrcxopfx Amyjld Total power requirement: 5.5 kW Dimensions & Weight Space requirement: approx. 2,490 x 1,050 x 2,780 mm Machine weight: approx. 3,800 kg

Condition: used, Year of construction: 2017, grinding length 1000 mm centre height 180 mm length 3600 mm width 1650 mm height 1800 mm Nodpfx Amowp Tumeysld weight of the machine ca. 3,7 t

Condition: used, Year of construction: 2017, grinding length 1500 mm centre height 180 mm Nlsdewm Rqgjpfx Amysd weight of the machine ca. 3,9 t dimensions of the machine ca. L: 4900 x 1650x 1800 m

Condition: used, functionality: fully functional, Year of construction: 2015, Palletizer and pallet wrapper Nljdpfjtw Szasx Amyed Capacity 100 kg / h Used, no warranty This machine is located in Tata, Hungary. What is Pellet? Pellets are a natural biofuel made from made from agricultural and forestry wastes, such as dried sawdust, compressed into small cylinders with a diameter of a few millimetres. It possible to obtain a compact product with no additives and chemicals. Benefits of pellets? Among the most important advantages: environmental sustainability (reduction of deforestation and GHG emissions); cheap to produce and affordable to buy. And, due to the pressing process, the calorific value of pellets is approximately double that of wood for the same volume.

Condition: ready for operation (used), functionality: fully functional, The frames of the RSM series machines have a heavy-duty design and long, supported guides. The table can rotate and the precisely adjustable hydraulic feed moves smoothly in the longitudinal direction. WORKING AREA Height point 135 mm Workpiece length 640 mm Grinding length 500 mm Grinding diameter 8 mm - 200 mm Inside diameter without support 25 mm - 100 mm Workpiece weight between centers (max.) 50 kg Nedjri Ngyepfx Amyeld Internal depth 125 mm Table miter cuts (max.) -3° / +9° R / L Peripheral speed 38 m/s DIMENSIONS AND WEIGHTS Grinding disc dimensions400 mm x 50 mm x 203 mm Grinding wheel internal dimensions (max.)50 mm x 40 mm x 16 mm Grinding disc dimensions (min.)45 mm x 35 mm x 10 mm Dimensions (length x width x height)2.5 m x 1.6 m x 1.5 m Weight 2500 kg

Condition: excellent (used), Knuth UFM 2 universal milling machine Technical data X-axis travel (manual) 800 mm X-axis traverse path 750 mm Traverse path Y-axis 300 mm travel Z-axis 400 mm table size 1320x320 mm T-slots 5x14x63 mm Feeds Y-axis travel (8) 20 - 360 mm/min Z-axis travel 600 mm/min Spindle speed (12) 58 - 1800 min-1 Nlsdpfonfu Riox Amysd Vertical spindle taper SK 40 Distance between spindle tip and table 0 - 400 mm Head rotation 45 Cone of horizontal spindle SK 50 Drive Main motor power 4 kW motor power in Z axis 0,75 kW feed motor power 0,55 kW cooling pump motor power 0,09 kW Coolant pump capacity 25 l/min Dimensions and weight dimensions 1900x1720x1750 mm weight 2100 kg Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our store! International shipping costs on request!

Year of construction: 2005, condition: ready for operation (used), Stroke: 135mm, max. sheet thickness: 20mm, max. bending length: 3050mm, pressing force: 80t, max. operating pressure: 2975psi, max. die opening: 250mm, bending angle range: 1°-42°, oil capacity: 150L, max. tool weight upper/lower: 40kg/115kg. Machine dimensions X/Y/Z: approx. 4000mm/2050mm/2450mm, weight: approx. 6000kg. Documentation available. An on-site inspection is possible. Nedpfxsxl Upnj Amyeld

Condition: ready for operation (used), Turning diameter over bed/cross slide: 530mm/280mm, center height: 264mm, center width: 2000mm, bed width: 370mm, speed: 2000rpm, spindle bore: 80mm, tool shank dimensions X/Y: 25mm/25mm, cross slide travel: 300mm, quill diameter: 65mm, quill stroke: 180mm, repeat accuracy: mm. The machine has an electrical problem on the tool head. Documentation available. On-site inspection is possible. Nedpfxjv Amrtj Amyjld

Condition: used, Year of construction: 2002, x-travel 400 mm y-travel 320 mm z-travel 440 mm table-size 80 x 325 mm spindle taper ISO Sk 40 spindle turning speed range 63 - 3150 U/min quill stroke 60 mm weight of the machine ca. 1,5 t dimensions 1,8 x 1,8 x 1,9 m Universal Milling Machine - Digital Display - Hydraulic Tool Clamp - Central Lubrication - Coolant System - Machine Light Nlodpfx Amsw Tdxieysd - Machine Feet - Counter Bearing - Chip Tray

Condition: good (used), Year of construction: 2017, operating hours: 5,850 h, functionality: fully functional, TECHNICAL DETAILS Cutting sand: 6 t MACHINE DETAILS Njdpfx Amsw T Rxpeyeld EQUIPMENT - Accessories - Spare parts - Wear parts

Year of construction: 1995, condition: used, bore capacity in steel (diameter) 50 mm throat 335 mm bore stroke 250 mm Njdpjwu Hg Tsfx Amyjld feed power max. 16 kN spindle taper MK4 spindle motor 3 kW table surface area 850 x 450 mm travel -x axis 600 mm travel -y axis 300 mm travel -z axis 205 mm weight of the machine ca. 1,8 t dimensions of the machine ca. 1,618 x 1,802 x 2,520 m

Condition: used, Year of construction: 2008, machine/vehicle number: 147233, Ref. no. 20312 Technical Data: Nodpfxoylylij Amyjld - Workpiece thickness: 0.8 to 51 mm - Max. working width: 1370 mm - Max. grinding height: 100 mm - Grinding diameter: 150 mm - Grinding speed: 1720 rpm - Feed rate: 3.7 m/min - Drive: 400 V / 9.7 kW - Working height: 1100 mm - Space requirement approx.: W 1700 x H 1200 x D 1200 mm - Weight approx.: 800 kg - Separate mobile motorised grinding dust extraction unit

Condition: new, Amada/promecam style Centrical 1V press brake dies Nlsdpfx Amein I Hrjyed

Condition: good (used), Year of construction: 2006, feed length X-axis: 1,650 mm, feed length Y-axis: 1,000 mm, Max. drill Ø steel: 5 - 40mm X - Travel: 1650mm Y - Travel: 1000mm W - Travel: 500mm Table size L x W / or ø:1200 x 1500mm Spindle taper: SK40Mk Speeds / ranges: 4200Rpm Length: 6500mm Width: 3800mm Height: 3400mm Weight: 6500kg Nlsdewyup Tjpfx Amyed

Condition: used, operating hours: 50 h, number of beds: 30, Operating hours: 50, First registration: 02.02.2026_____First registration: 02.02.2026, Operating hours: approx. 150 Standard equipment/technical data: ENGINE Maximum power 132/180 kW/hp (ISO 14396) Maximum power with power management 155/210 kW/hp Maximum torque 750 Nm, with power management 860 Nm Registered power 148 kW (ISO 14396) Maximum power at the PTO 114/155 kW/hp (OECD) 6 cylinders, 6.6l AGCO Power - 66 AWF, CR, 4V Exhaust aftertreatment with DOC - Diesel Oxidation Catalyst, SCR 3rd generation & Diesel Particulate Filter Emissions standard: Stage 5 Electronic engine control with Vistronic fan control Engine speed memory Powercore engine air filter with pre-cleaning of coarse dirt EasyCare radiator package Nljdszpcu Hepfx Amysd 305 liter fuel tank

Condition: new, Year of construction: 2026, _____Standard Equipment / Technical Data Engine Rated Power (ISO) 68 / 90 kW / hp at 2200 rpm Max. Power 71 / 95 kW / hp at 2000 rpm Max. Torque 405 Nm at 1500 rpm Manufacturer / Type: Agco Power / AP 44MBTN-D5 Low-emission engine, 4 cylinders / 4.4l, 4V, STAGE 5 Controlled Turbocharger, SCR - Catalyst DOC - Diesel Oxidation Catalyst SCR Particulate Filter Catalyst Hood - single-piece, foldable Exhaust pipe on the right side in front of the cab Fuel tank capacity 198 liters / AdBlue 18 liters Transmission / PTO 16/16-speed Dyna-4, SpeedMatching, 40 km/h PowerControl operation on the left with load-sensing reversing gearbox, clutch operation, 4-stage load shifting with 1 lever, T-shuttle lever in the side console Partially automatic group shifting and Autotronic monitoring Permanently cooled wet disc clutches with independent lubrication system PTO: 540 / 540E / 1000, stub shaft 1 3/8", 6-spline Electrical engagement in the cab PTO START/STOP button on the rear, left fender Hydraulics / Lifting System Open Center system Quick coupler Cat. 2 Upper link control 4,300 daN maximum lifting force, 2 external lifting cylinders Adjustable lifting struts on both sides EHR with external control on both fenders Quick adjustable automatic drawbar coupling Electrical system Thermostart, 120 A alternator Power supply (12 Volt) for external devices with connector Axles / Additional Weights All-wheel drive front axle with switchable differential lock Rear axle ND with flange hub Oil-cooled disc brakes Nlodpfxjzpcvds Amyed Front fender, width adjusted, rotatable Rear fender width 1.80 m, without extensions Front weight carrier with integrated drawbar and drawbar pin Driver's Seat Vibration-damped standard cab with standard roof, ventilation and heating Integrated safety frame with tinted glazing Doors on both sides with safety steps Steering column adjustable in height and inclination Air-suspended driver's seat with armrests, swivel adapter, safety belt Exterior & wide-angle mirrors Interior mirror Analog-digital instrument panel (SIS) Radio preparation with antenna and speakers 4 work lights front and rear on the cab roof 2 driving lights in the hood and on the handrails, 2 work lights on the rear fenders Special Equipment: Fuel tank protection PowerControl & Brake on Neutral (clutch effect) 100 l/min, Open Center hydraulic system oil flow coupling (58+42 l/min) Front loader quick coupling system Leak oil collector on quick couplers 3 control valves: 1x MR, dw, EA, SST + 1x dw, NL, SST + 1x dw, NL, SST + free return 2.5t front lift, 1 hydraulic line set, electrical socket MF front loader preparation: foundation set, hydraulic set, electrical control via joystick, PTO: 540/540E, flanged, 6-spline, internal engagement Rear fender extensions - 100mm Tires 480/70R38 & 380/70R28 Air conditioning Cab with mechanical suspension Telescopic exterior & wide-angle mirrors Passenger seat with belt Air-suspended driver's seat, automatic adjustment with safety belt, swivel adapter and armrests Rear window wiper / washer system Without MF Connect (MF Telemetry System)

Condition: used, Year of construction: 2023, operating hours: 448 h, power: 186 kW (252.89 HP), maximum speed: 50 km/h, front tire size: 600/70 R30 | 0%, rear tire size: 710/70 R42 | 0%, tire size: 710/70 R42, number of beds: 43, Tires (front): 600/70 R30, Tires (rear): 710/70 R42, Operating hours: 448, First registration: 12/17/2024_____Price: 175,900.00 Euro net Standard equipment/technical data: Nodpfsvv Dp Nox Amyold ENGINE: Max. power 180/245 kW/hp (ISO 14396), Max. torque 1100 Nm, Maximum power with power management 194/265 kW/hp, Max. torque with power management 1178 Nm, 6 cylinders, 7.4l AGCO Power - 74 LFNT-5D, CR, 4V, Emission standard (DOC+SC+SCR) without exhaust gas recirculation, Stage 5, Electronic engine control with Vistronic fan control, Engine speed memory, Powercore engine air filter with coarse dirt pre-filter, EasyCare radiator package, Additional fuel pre-filter with water separator, 500-liter fuel tank.

Condition: used, Year of construction: 2023, operating hours: 237 h, maximum speed: 50 km/h, front tire size: 540/65 R28 | 0%, rear tire size: 650/65 R38 | 0%, tire size: 650/65 R38, number of beds: 35, Tires (front): 540/65 R28, Tires (rear): 650/65 R38, Operating hours: 237, First registration: 19.12.2024. Price: 142,900.00 Euros net. Standard equipment/technical data: ENGINE Max. power 121/165 kW/hp (ISO 14396) Max. power with power management 136/185 kW/hp Max. torque 790 Nm, with power management 800 Nm Registered power 134 kW (ISO 14396) Max. power at the power take-off 103/140 kW/hp (OECD) 4 cylinders, 4.9l AGCO Power - 49 LFNT-D5 Exhaust aftertreatment with DOC - Diesel Oxidation Catalyst, SCR 3rd generation & Diesel Particulate Filter Emission standard: Stage 5 Electronic engine control with Vistronic fan control Engine speed memory Powercore engine air filter with coarse dirt extraction EasyCare cooling system package 280 liter fuel tank Nledpfxew A Hgpe Amyed

Condition: used, Year of construction: 2023, operating hours: 197 h, maximum speed: 34 km/h, Operating hours: 197, first registration: 10/28/2025. Basic equipment / technical data: Engine: Diesel, 3-cylinder turbo engine, 1,825 ccm - 35 hp (ISO). Exhaust: front, left. Emission standard: Stage 5. Dry air filter. Air intake system under the hood. Fuel tank capacity: 36 liters. Transmission / PTO: Hydrostatic transmission, electronically controlled. 3 groups. Electro-hydraulic PTO clutch. Rear PTO: 540 / 540Eco rpm. Central PTO. Rear axle / brakes: Oil-cooled disc brakes in the rear axle. Parking brake. Mechanical differential lock in the rear. Lifting device / hydraulics: Three-point hydraulics with mechanical position control. 1,200 daN lifting force. Hydraulic pumps with 55.1 l/min, max. pressure 160 bar. Working circuit: 41.5 l/min. 2 control valves - single/double-acting. Joystick control for 2 additional central valves. Cat. 1 lower links with hitch and upper link with ball joints. Front axle: All-wheel drive - portal front axle. Mechanical engagement of the all-wheel drive. Hydrostatic steering (separate pump). Front weight carrier with towing hitch. Tires: Without tires, without front fender. Driver's cab: De-Luxe cab factory-mounted, fixed windshield. Heater and air conditioning. 2 work lights at the front on the cab roof. 2 doors. Analog-digital instrument panel. Tilting steering column. Seat with mechanical suspension. Special equipment: - air-suspended driver's seat - hydraulic couplings - tires 24x8.5-12 / 315x80D16 Golf - front fender - front hydraulics with lower link and 1 single-acting valve - rotating beacon. Price: 33,000.00 Euro net, storage location: 54595 Prüm. Nedeyt Aaxopfx Amyeld

Condition: used, Year of construction: 2021, operating hours: 230 h, power: 68 kW (92.45 HP), maximum speed: 40 km/h, front tire size: 380/70 R24 | 0%, rear tire size: 480/70 R34 | 0%, tire size: 480/70 R34, Tires (front): 380/70 R24, Tires (rear): 480/70 R34, Operating hours: 230, First registration: 15.12.2023. Machine with first registration: 12.2023. Operating hours: approx. 230. Standard equipment/technical data: Engine Rated power (ISO): 68/92 kW/hp Max. power: 70/95 kW/hp at 2000 rpm Max. torque: 355 Nm at 1600 rpm Manufacturer/Type: Agco Power / AP 33 AWI Low-emission engine, 3 cylinders / 3.3 l, Stage V DOC & SCR, AdBlue tank with 15 L, without exhaust gas recirculation, without particulate filter Vertical exhaust: on the right side, in front of the cabin A-pillar Fuel tank capacity: 120 liters Transmission: 12/12-speed Nljdpfszpcuyjx Amyjd

Condition: used, Year of construction: 2023, operating hours: 950 h, power: 224 kW (304.55 HP), maximum speed: 50 km/h, front tire size: 600/70 R30 | 0%, rear tire size: 710/70 R42 | 0%, tire size: 710/70 R42, number of beds: 43, Tire size (front): 600/70 R30, tire size (rear): 710/70 R42, operating hours: 950, initial registration: 12/19/2024. Price: 199,000.00 euros net. Initial registration: 12/19/2024. Operating hours: approx. 850. Standard equipment/technical data: ENGINE: Max. power 224/305 kW/HP (ISO 14396), max. torque 1280 Nm, 6 cylinders, 7.4l AGCO Power - 74 LFNT-5D, CR, 4V, emission standard (DOC+SC+SCR) without exhaust gas recirculation, Stage 5, electronic engine control with Vistronic fan control, engine speed memory, Powercore engine air filter with coarse dirt extraction, EasyCare radiator package, additional fuel pre-filter with water separator, 500-liter fuel tank. Njdpfsw E N Tdjx Amyold

Condition: used, Year of construction: 2003, machine/vehicle number: MR2TTR23099, AVAILABLE from Manufacturer: Cefa/Sorbini - Type: SMARTCOATER REVERSE MF - Two application units, one in REVERSE - Year of manufacture: 2003 - Working width: 1.300 mm - Working height: 880 mm - 940 mm - Workpiece height ~ 3 - 80 mm - Operating side: right - Paint application shaft 50 - 60 Shore - Roller diameter: 250 mm Nljdpfx Amjzmh Ereyod - Metering roller: 173 mm - Double diaphragm pump 1 piece for both application machines - Transport system with roller conveyor - Roller conveyor pitch: 150 mm - Roller diameter: 100 mm - Compressed air connection: 6 bar - Compressed air consumption: 54 NL/min. - Machine length: 1.640 mm - Machine width: 3.000 mm - Mobile on flanged rollers - Feed speed: ~ 4 - 20 m/min - Application quantity ~ 4 - 50 g/m² - Machine weight 2.520 kg - Control cabinet on the machine, traveling with it - With chassis - Total power 5.5 W / 30 A - Volts, Hz 400 / 50 - Voltage fluctuations max. +/- 5% - Location: in stock