Used Kaeser Sx 7 for sale (27,293)

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 1 h, new KAESER SXC8 screw compressor system (10 bar) available immediately with integrated refrigeration dryer with 215 liter compressed air tank with electrically level-controlled condensate drain with Sigma Control 2 control Iodjhhiw Nepfx Aa Ejid Year of construction: 2022 Operating hours: 1.5 operating hours Technical data: Volume flow at 10 bar: 0.67 m³ / min Nominal power drive motor: 5.5 kW Electrical supply: 400 V / 3 ph / 50 Hz Dimensions W x D x H in mm: 620 x 980 x 1480 Weight: 260 kg Compressed air tank: 215 liters Compressed air connection: G 3/4 " Sound pressure level: 69 dB (A) Refrigeration dryer pressure dew point: 6 ° C Visit our store. We always have a large selection of new and used compressors in stock! Available immediately.

Condition: new, Year of construction: 2021, functionality: fully functional, Oil separator cartridge 6.3789.0 Original Kaeser spare part Suitable for Kaeser compressors: Iiodpfxevkfzpo Aa Ejd ASK 27/32/35/ From stock We are on vacation until 06.01. Your request will be processed afterwards. Warranty and returns are excluded from this advertisement.

Year of construction: 2000, condition: ready for operation (used), There are 3x Kaeser compressors, 2x Atlas Copco compressors and 3x Kaeser refrigeration dryers available. 1) Compressor Kaeser CS 75, year of manufacture: 1992, operating pressure: 10bar, operating hours: 38265h. 2) Compressor Kaeser AS 44, year of manufacture: 1999, operating pressure: 8.5bar, operating hours: 41564h. 3) Compressor Kaeser BS 60, year of manufacture: 1983, operating pressure: 7.5bar, operating hours: 50674h. 4) Compressor Atlas Copco GA 45, year of manufacture: 1990, operating pressure: 10bar, operating hours: 26831h. 5) Compressor Atlas Copco GA 45, year of manufacture: 1990, operating pressure: 10bar, operating hours: 52447h. 6) Refrigeration dryer Kaeser TD 51, year of manufacture: 1997, refrigerant: R22. 7) Refrigeration dryer Kaeser TF 171, year of manufacture: 2000, refrigerant: R134a. 8) Refrigeration dryer Kaeser TE 76, year of manufacture: 1996, refrigerant: R22. Documentation available. On-site inspection is possible. Ijdpfx Aoulkvdja Ejid

Year of construction: 2016, condition: good (used), machine/vehicle number: 3385, The cost-effective drainage of condensate for your compressor. The oil is separated from the water with a filter set (ATTENTION: filter set is not included in the Iijdpfoqmmkksx Aa Eod scope of delivery) The purified water (only in conjunction with the filter set) is approved for discharge into the sewer. Guarantee and warranty are excluded in this advertisement. Price on request.

Condition: new, Year of construction: 2025, KAESER compressed air tank 10000 liters standing, galvanized 16 bar include fittings Year of construction: 2025 High-quality compressed air tank in galvanized design. Galvanized inside and outside according to DIN EN ISO 1461 in immersion bath. Connecting piece for conical threads. Technical specifications: Volume: 10000 liters Overpressure max: 16 bar -Diameter: 1600 mm Container height: 5415 mm Mass: 2550 kg Connection compressed air inlet: 2x DN 200 Connection compressed air outlet: 2x DN 200 Connection safety valve: G 2 " Connection condensate drain: G 1 1/2 " Isdpjkzizgefx Aa Esid Container acceptance: RL2014 / 29 / EU Min. Operating temperature: - 10 ° C Max. Operating temperature: + 50 ° C Surface coating: galvanized For new machines comfortable leasing via our house bank possible. Visit our shop. We always have a large selection of new and used compressors in stock!

Condition: new, Year of construction: 2021, functionality: fully functional, Oil separator cartridge 6.3789.0 Original Kaeser spare part Replacement separator cartridge for the oil separator tank From stock sale We are on vacation until 06.01.. Your request will be processed afterwards. Warranty and returns are excluded from this advertisement. Iedpevkfxhefx Aa Eoid

Condition: new, Air filter cartridge 6.1997.0 Original Kaeser spare part Suitable for Kaeser compressors: CS 75, 90, 120 Iiedpfx Aaevkfyfj Ejd Guarantee and warranty are excluded in this advertisement. Price on request.

Year of construction: 2017, condition: good (used), machine/vehicle number: 4066, The cost-effective drainage of condensate for your compressor. Iodpfx Ajqmmvcoa Eeid The oil is separated from the water with a filter set. The filter set is included in the scope of delivery. The purified water (only in conjunction with the filter set) is approved for discharge into the sewer. Guarantee and warranty are excluded in this advertisement. Price on request.

Condition: used, Year of construction: 2021, saw blade diameter 370x32x3 mm 15-150 U/min vice 190 mm Iijdpeyvvpasfx Aa Ejd capacity 90 degrees: round 120 mm capacity 90 degrees: square 110 mm capacity 90 degrees: flat 180x100 mm 115 mm 90 mm 90x90 mm 115 mm 100 mm 120x100 mm 115 mm 100 mm 120x100 mm total power requirement 5,5 kW weight 615 kg Overall size 1400x1400x2000 mm

Condition: ready for operation (used), Year of construction: 2014, operating hours: 229 h, functionality: fully functional, machine/vehicle number: DS001155, Size 53 x 74 cm, Prinect Press Center, Axis Control, Autoplate XL, Alcolor dampening, cooling and recirculation unit, perfecting 4-4 or 8-0, excellent condition Ijdpfxowuth Re Aa Esid

Condition: new, Elau SX-1/22/1/0/8 m FB1 SV 5.13 L1 Card Id. 11130135 SN:911297.0010, unused in opened original packaging, 100% functional, scope of delivery as per photos Isdsv E Tuajpfx Aa Esid

Condition: used, functionality: fully functional, Year of construction: 2023, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: RAS, controller model: 4,0, working width: 3,200 mm, lower beam adjustment: 650 mm, folding beam adjustment: 150 mm, installation height: 2,200 mm, throat depth: 1,000 mm, bending angle (max.): 180 °, bending radius (max.): 25 mm, bending radius (min.): 1 mm, operating speed: 120 mm/s, reverse speed: 200 mm/s, number of axes: 4, type of crowning: CNC-controlled, sheet thickness (max.): 4 mm, sheet thickness steel (max.): 3 mm, sheet thickness stainless steel (max.): 2 mm, sheet thickness aluminum (max.): 4 mm, back gauge speed R-axis: 200 mm/s, back gauge travel distance R-axis: 150 mm, back gauge travel distance Z-axis: 3,250 mm, overall weight: 11,500 kg, total length: 5,600 mm, total width: 3,360 mm, total height: 2,200 mm, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, documentation/manual, emergency stop, FOR SALE: RAS XLTBEND 71.30 UPDOWN CNC PRESS BRAKE Price: 250,000 EUR net – negotiable For sale, a high-quality RAS XLTbend 71.30 UpDown CNC press brake from the renowned German manufacturer, RAS Reinhardt Maschinenbau GmbH. This machine is designed for the professional production of components from steel, stainless steel, and aluminum sheets. The UpDown technology enables bending upwards and downwards without the need to rotate the workpiece, which significantly reduces production time and increases efficiency. TECHNICAL DATA: • Working length: 3200 mm • Max. sheet thickness: mild steel: 3.0 mm Iiedpfxjzfvkgj Aa Eod stainless steel: 2.0 mm aluminum: 4.0 mm • Beam opening height: 150–650 mm • Automatic adjustment of bending parameters via CNC • Servo drives for working axes • Beam-in-Beam technology for very high bending precision • CNC control with 3D visualization EQUIPMENT: • XLTbend CNC control • Two 24" touch screen monitors • Import of STEP, DXF, GEO files • Automatic generation of bending programs • 3D bending process simulation • "T"-type positioning table • Positioning system with suction cups • Automatic bending sequence • Air-conditioned control cabinet • Safety and diagnostics system ADVANTAGES: • Very high production efficiency • Minimization of operator involvement • Ability to produce complex parts without repositioning the sheet • Ideal for the production of enclosures, cassettes, control cabinets, ventilation elements, and sheet metal structures Condition: very good Location: Skarżysko-Kamienna, Poland Price: 250,000 EUR net – negotiable Contact: Kamil Wiatrak

Condition: used, maximum load weight: 42,400 kg, overall weight: 64,000 kg, axle configuration: > 3 axles, first registration: 01/2011, Equipment: ABS, Goldhofer STZ-VLS4-37/80 and Goldhofer Dolly SX 1-25/80 - Height-adjustable low bed with removable gooseneck ----* Manufacturer: Goldhofer * Type: STZ-VLS4-37/80 * First registered: 01/2011 * Color: yellow * Total weight: 64,000 kg * Empty weight according to vehicle registration document: 21,600 kg * Axles: 4x BPW axles, of which 1st axle is steered via turntable steering, the remaining 3x axles are hydromechanical forced steering * Steering knuckle axles up to max. 45 degrees * Tires: 235/75 R17.5 approx. 70% * Suspension: Air suspension with lifting and lowering * EBS Wabco * Removable gooseneck with aluminum side walls * Hydraulic cylinders for support on the tractor unit * Toolbox with flap at the front of the gooseneck * Controls and pressure gauge on the left of the gooseneck * Gooseneck designed for freely rotating 1-axle dollies * Low bed for the chassis can be raised and lowered hydraulically * Chassis with excavator trough (starts from the 2nd axle) * Extendable widening of the loading area 440mm (2x 220mm) and 700mm (2x 350mm) * Wooden planks to bridge the gap between the widenings * Air suspension with raising and lowering to min. 825mm to 1,025mm (no driving position) * 2x fixed driving heights: * 1st driving height 925mm +100mm/-100mm * 2nd driving height 885mm +100mm/-100mm * 2 pairs of retractable lashing eyes in the gooseneck floor * 5 pairs of retractable lashing eyes in the low bed floor * 5 pairs of side lashing eyes on the low bed chassis * 4 pairs of stake holes in the low bed floor Ijdpfxsx Suzao Aa Esid * 3 pairs of retractable lashing eyes in the chassis floor * 2 pairs of side lashing eyes on the chassis chassis * 2 pairs of stake holes in the chassis floor * 2x lashing eyes in the excavator trough * Rear of the vehicle sloped 10 degrees * 1-part hydraulic ramps (2,850mm x 720mm) and hydraulic supports at the rear * Operation of hydraulic ramps + supports at the rear left * Smartboard at the rear right * Additional LED reversing lights on the gooseneck and at the rear of the low loader * 1st hand German vehicle!! German papers!! 1st hand!! Goldhofer SX 1-25/80 Dolly ----* Manufacturer: Goldhofer * Type: SX 1-25/80 * First registered: 03/2011 * Color: Yellow * Total weight: 28,000 kg * Empty weight according to vehicle registration document: 2,750 kg * Axles: 1x BPW axle * Tires: 235/75 R17.5 approx. 70% / twin tires * 3" fifth wheel plate * Single fender * Supports * Loading manometer * 1st hand German vehicle!! German papers!!

Condition: used, mileage: 220,000 km, power: 74 kW (100.61 HP), first registration: 10/2014, fuel type: diesel, overall weight: 2,370 kg, next inspection (TÜV): 04/2027, color: red, gearing type: mechanical, emission class: euro5, Year of construction: 2014, Equipment: ABS, central locking, soot filter, * Maxi version * Heated seats * TÜV valid until 2027/4 * Timing belt replaced at 144,000 km (11/2022) Special equipment: Rear parking assist, smoker’s package, heated seat front left Iijdpfx Aeyvcxtsa Eed Additional equipment: 6 speakers, passenger airbag, driver airbag, electrically adjustable and heated exterior mirrors (both sides), exterior mirrors in vehicle color, 40 Ah battery, assistance system: brake assist, lockable glove compartment, rear wing doors without windows, body/construction: panel van, cargo partition wall, height-adjustable steering column (steering wheel), engine 1.6 L – 74 kW JTDM CAT, radio preparation, wheelbase 3105 mm, tire repair kit, low emission according to Euro 5 standard, reinforced disc brakes in front, right sliding door, side window in cargo/passenger area rear side panel (3rd row) covered, height-adjustable driver’s seat, steel wheels 6.5x16, 12V socket on dashboard, 12V socket in boot/cargo area, cargo compartment lining

Condition: new, power: 8 kW (10.88 HP), Year of construction: 2026, STIHL RT 4097.1 SX ride-on lawnmower NEW / Unused * Year of manufacture: 01.2026 * Type: Ride-on lawnmower * Power: 8.9 kW * Fuel: Gasoline Iedpfxsy Tz Iie Aa Eoid * Fuel tank capacity: 9 l * Engine type: 4-stroke * Cutting width: 95 cm * Cutting system: Side discharge * Displacement: 452 cm³ * Power transmission: Hydrostatic * Number of blades: 2 * Height adjustment: 5 settings * Starting system: Electronic ignition * Cutting height min - max: 30 mm - 100 mm * Number of gears: 1 forward - 1 reverse, foot pedal Inspection possible during our opening hours at any time, test drive upon request! For export sales, a deposit will be retained, which will be refunded upon receipt of the proof of delivery. Company logos or advertising logos on the vehicles may have been digitally edited in the photos. No guarantee is given for the function of the extras. All information without guarantee - errors, changes, typos and prior sale reserved. Vehicle descriptions are expressly not guaranteed characteristics. We refer to our general terms and conditions and ask you to take note of them.

Condition: excellent (used), mileage: 39,500 km, power: 77 kW (104.69 HP), fuel type: diesel, fuel: diesel, color: silver, gearing type: mechanical, number of gears: 5, emission class: euro6, number of seats: 3, Year of construction: 2022, Number of doors: 5 Cab: single Number of cylinders: 4 Iedpfx Aasw R Uuce Eeid Engine displacement: 1,600 cc Technical condition: very good Visual condition: very good Damages: none Warranty: none

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, saw blade diameter: 700 mm, table width: 6,000 mm, OPTIMIZING AND DEFECTING CROSS-CUTTING LINE CURSAL MOD. TRV 2000E 700 SX Line configuration: - Motorized roller conveyor 6000 x 760 mm - Chain feeder with singulator (buffer magazine) for boards from 4500 mm up to 6000 mm, capacity 6 boards - Optimizing and defecting cross-cutting saw Cursal mod. TRV 2000 E 700 SX - Roller feed system - Blade diameter 700 mm - Max feed speed 150 m/min - Cutting section 480 x 65 mm - Cutting section 530 x 30 mm - With chalk defect marking system - Year 2015 Isdpfx Aajywdx Se Esid - Outfeed conveyor belt 5000 x 600 mm - Bilateral overhead ejector - N. 2 transfer conveyors for semi-finished parts (1 right + 1 left) - N. 2 accumulation roller conveyors (1 right + 1 left)

Condition: used, Year of construction: 2004, cutting diameter 120 mm saw blade diameter 370 mm vice 190 mm capacity 90 degrees: flat 180 x 95 mm capacity 45 degrees: round 110 mm capacity 45 degrees: flat 125 x 95 mm Ijdpfx Aaoxabrxo Ejid capacity 60 degrees: round 90.0 mm capacity 60 degrees: flat 90 x 95 mm dimensions of saw-blade 370 x 32 x 2,5 mm cutting speed 15 - 150 m/min engine output 3.0 kW weight 640 kg range L-W-H 900 x 1500 x 1910 mm New price ~ 16.000 euros - in checked condition - machine video - ?v=gxj5GWtTcDE Furnishing : - semi-automatic vertical metal circular saw - with miter adjustment 60 ° left / 45 ° right - swiveling control panel, front left - The saw head slides on linear double guides - pneumatic vice clamping - pneumatic saw blade feed, stepless - Infinitely variable speed adjustment from the saw blade - 2x replacement saw blade - Machine frame with coolant device - Operation manual

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 812096, space requirement length: 9,000 mm, space requirement width: 6,200 mm, space requirement height: 4,650 mm, power: 34.5 kW (46.91 HP), fuel type: electric, volume flow: 130,000 m³/h, ambient temperature (max.): 32 °C, noise level: 95 dB, type of cooling: air, Equipment: documentation/manual, INDUSTRIAL SPIRAL FREEZER FOR SALE We are offering a high-quality industrial spiral freezer from Heinen Freezing GmbH, manufactured in 2004 and designed for continuous freezing applications in large-scale food production. This robust system delivers reliable performance and long service life with industrial-grade components and engineering. Iodjx Hhwkepfx Aa Eoid Total Cooling Capacity: 172 kW Compressor Unit included: BITZER HSK451-70(Y) semi-hermetic screw compressor. 4 of them are included. Motor Power: 55.1kW Voltage: 400 V / 3Ph / 50 Hz Air-Cooled Condencer: (Cavacity 490 kW) with 4 fans and 130,000 m3/h airflow. NB! Removal and transport are not included in the price. Separate agreement.

Condition: new, saw blade diameter 370 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 110 mm 180 x 100 mm Working height 925 mm saw blade turning speeds 15 - 150 U/min total power requirement 5,5 kW weight of the machine ca. 0,615 t dimensions of the machine ca. 1,4 x 1,4 x 2,0 m Iodpfxsfg Rldo Aa Ejid Electro-pneumatic - semi-automatic vertical circular saw with micro Processor control for miter cuts from 60° left to 45° right. Basic equipment: •Saw head slides on recirculating ball linear double guides •Three-stage gearbox •continuously variable speeds 15-150 rpm •Vice opening 190 mm • Stroke of the saw head can be programmed directly from the control panel for adjustment to the cutting material •Pneumatic vertical vice •Saw blade HSS DMO 5 Æ 370x32x3 for solid and profile material •Vise with counter-clamping device for double workpiece clamping •Base with removable coolant tray •Chip clearing brush •Length stop for cuts of the same length •Material support arm, at the same time connection option for roller conveyor/ loading side

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, Auction of two Kaeser screw compressors, one Kaeser refrigeration dryer, and one compressed air tank! Iedpfxozktnye Aa Ejid Screw compressor Kaeser SK 22 Year of manufacture: 2020 Screw compressor Kaeser SK 19 Year of manufacture: 1995 Refrigeration dryer Kaeser TB 26 Year of manufacture: 2016 Compressed air tank Volume: 500 l Year of manufacture: 1986

Condition: excellent (used), Rexroth Voith triple pump for Krauss Maffei, SY2DFE1-20/071/071 KM No. 6268540 Iijdpfxjzl Dg No Aa Ejd KM No. 6441936 R901196471

Year of construction: 2008, condition: good (used), Complete compressor and air station Iodpegw Diasfx Aa Eoid Manufacturer: KAESER Models: AS 36 / TC 31 Year : 2008 Working pressure 7,5 bar

Condition: as good as new (ex-display), Year of construction: 2022, Kaeser screw compressor SM 13 - 11 bar exhibition piece at a special price Volume flow at 11.0 bar (g) 1.07 m³/min Electrical power consumption of the entire system at 11.0 bar (g) 9.63 kW Specific power 9.00 kW/(m³/min) Maximum overpressure 11.0 bar Drive motor efficiency at full load 91.7% Drive motor efficiency class IE4 Nominal drive motor power 7.5 kW Iedpjvk R A Sefx Aa Esid Drive motor speed 2955 rpm Drive motor protection class IP 55 Electrical supply 400 V / 3 Ph / 50 Hz Compressed air outlet temperature above ambient temperature (at +20°C, 30% relative humidity) 8 K Sound pressure level 65 dB(A Compressed air connection G 3/4 Location: From stock 54634 Bitburg - available immediately -

Condition: new, Year of construction: 2022, Kaeser screw compressor SK 22 - 11 bar - exhibition piece - Volume flow at 11.0 bar (g) 1.67 m³/min Electrical power consumption of the entire system at 11.0 bar (g) 13.7 kW Max. overpressure 11.00 bar Drive motor efficiency at full load 91.2% Drive motor efficiency class IE3 Iiodpfovk R Dcox Aa Eod Drive motor rated power 11.0 kW Drive motor speed 2960 rpm Drive motor protection class IP 55 Electrical supply 400V / 3 / 50Hz Compressed air outlet temp. above ambient temperature (at +20°C, 30% relative humidity) 6 K Sound pressure level 66 dB(A) Max. usable warm air volume 2500 m³/h Compressed air connection G 1 Cooling oil capacity 7.0 l Cooling oil type compressor SIGMA FLUID MOL Dimensions (W x D x H) 750 mm x 895 mm x 1260 mm Weight 312 kg Location: from stock 54634 Bitburg - available immediately -