Used Jetarc Plasma 100I for sale (509)

Condition: used, Flame cutting machine, plasma torch Rcodpsh Uhlijfx Amysd - Designation: plasma electrode Hypertherm 402 120667 -Max. Load: 200 A -Diameter: 13mm -Length: 41mm -Number: 9 pieces available -Price: complete -Total weight: 0.45kg

Condition: good (used), Plasma cutting machine, plasma cutter for plasma cutting system -Manufacturer: Hypertherm, gas console for plasma cutting machine -Type: 073239 from plasma cutting machine HT2000LHF -Dimensions: 295/175/H370 mm Rcsdpswpg I Tofx Amyod -Weight: 9.9 kg

Condition: good (used), Plasma hose package -Hose package: water-cooled Rcsdpfxjd S Ep Ue Amysd -Length: 10.5 m -Weight: 5.7 kg

Condition: used, Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 223 rpm Rodpecill Dofx Amyocd -Power: 2.2 kW -Construction: B5 -Diameter shaft: O 30 mm -Protection class: IP 33 -Price per piece -Quantity: 2 pieces available -Dimensions: 600/270 / H250 mm -Weight: 41 kgpc.

Condition: good (used), Plasma hose assembly, welding torch, MIG/MAG torch -Manufacturer: Kjellberg, Plasma machine torch hose assembly, water-cooled Rcjdpfx Aox Eipvomyed -Type: PerCut 100-1/O2 -Item No.: 11.835.421/56615/009 -Length: 7.0 m -Transport dimensions: Ø 570 x 170 mm -Weight: 10 kg

Condition: used, Plasma hose package, welding torch, MIG/MAG torch Rjdped S Eqfsfx Amyecd -ESAB type: PSF 410 Cw -Hose package: water-cooled -Spring contact -Length: 3.25 m -Price: per piece -Number: 2 pieces -Weight: 3.2 kg

Condition: used, Plasma hose package -Hose package: water-cooled Rsdsd S D Dpopfx Amyjcd -Handle: damaged -Length: 10 m -Weight: 6 kg

Condition: like new (used), functionality: fully functional, Year of construction: 2021, operating hours: 55 h, control type: CNC control, degree of automation: automatic, actuation type: pneumatic, controller manufacturer: HyperTherm, controller model: HYPERTHERM EDGE CONNECT, laser type: CO₂ laser, laser source manufacturer: Hypertherm XPR 170 (USA), sheet thickness (max.): 60 mm, sheet thickness steel (max.): 60 mm, table length: 8,100 mm, table width: 3,500 mm, table height: 750 mm, working length: 6,000 mm, working width: 2,000 mm, working height: 750 mm, power: 50 kW (67.98 HP), input voltage: 400 V, compressed air connection: 8.5 bar, overall weight: 7,000 kg, total length: 8,200 mm, total width: 4,100 mm, total height: 2,500 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, Baykal BPS 2006 CNC Plasma Cutting Machine – Hypertherm XPR170 High-Definition + True Bevel + True Hole CNC plasma cutting machine in very good working condition - Like NEW, year of manufacture 02/2021 (serial no. 27804), low operating hours - approx. 55h, one owner. Plasma source: Hypertherm XPR170 X-Definition (made in USA) with automatic gas console — cutting capacity 0.5–60 mm, accuracy ±0.1 mm. True Hole technology for superior hole quality on mild steel. Bevel cutting: True Bevel technology — automatic bevel head up to +/- 45° (weld-prep cuts without secondary operations). CNC control: Hypertherm EDGE Connect TC, Windows-based, touch screen. Software: Hypertherm ProNest CAD/CAM with automatic nesting (DXF, DWG, IGES import). Main specifications: Cutting table: 2000 x 6000 mm, sectional fume extraction with CNC-operated electropneumatic dampers Positioning speed: up to 30 m/min, positioning accuracy ±0.01 mm Dual synchronized AC servo drive on longitudinal axis, rack & pinion Automatic torch height control (capacitive initial height sensing + arc voltage THC), torch collision protection Rodpfx Ajzktiqjmyecd Nominal power: 50 kW, 380/400 V Air pressure: 8.5 bar Machine dimensions: 8100 x 4100 x 2500 mm, weight approx. 7000 kg Includes filter/extraction unit and XPR170 consumables starter kit (mild steel) Machine is ready for inspection. Dismantling and loading can be arranged. Price negotiable, export possible worldwide.

Year of construction: 1999, condition: ready for operation (used), A ZinserCNC plasma cutting machine is offered, max. plasma capacity: 130A, max. plasma material thickness: approx. 25mm, max. oxy-fuel material thickness: approx. 200mm, cutting table dimensions X/Y: approx. 2750mm/10500mm, working area X/Y: approx. 2000mm/9000mm, X/Y drive: rack and pinion, control: Zinser CNC 500. Inspection possible by appointment. Rcodpfx Ajzklgbemyjd

Condition: used, Year of construction: 2017, functionality: fully functional, controller manufacturer: ECS, controller model: SERIE 900, control type: NC control, TABLE DIMENSIONS: 2500 mm x 1250 mm Redpfsxc Ibrsx Amyjcd C.N. E.C.S. series 900 GENERATOR: CEBORA PLASMA PROF166

Condition: used, Year of construction: 2020, functionality: fully functional, type of input current: three-phase, sheet thickness steel (max.): 80 mm, table length: 6,000 mm, working width: 3,000 mm, table width: 3,000 mm, working length: 6,000 mm, travel distance X-axis: 6,000 mm, travel distance Y-axis: 3,000 mm, Equipment: documentation/manual, CNC Plasma Cutting Machine 6000x3000 mm – Messer MetalMaster Xcel 6030 – Hypertherm XPR300 – Bevel Head Rcsdpfxoyx Svbe Amyjd CNC Plasma Cutting Machine Messer MetalMaster Xcel 6030 General Information • Manufacturer: Messer Cutting Systems year of manufacturing 2020 • Model: MetalMaster Xcel 6030 • Machine Type: CNC Plasma Cutting Table • Condition: Used – good working condition • Availability: Immediate available Working Area • Cutting table size: approx. 6000 × 3000 mm Plasma System • Plasma power source: Hypertherm XPR300 High-definition plasma system for precise and high-speed cutting of carbon steel, stainless steel, and aluminum. Equipment / Options • Bevel cutting unit: BEVEL-R (5-axis bevel cutting system) for weld preparation and angled cuts • Software: OmniWin – programming and nesting software for optimized material usage Dust extraction system • BEUTING PFM3-9 (100 L extraction unit Machine Advantages • Robust industrial gantry construction • High precision and productivity • Bevel cutting capability for complex parts • Efficient nesting and programming via OmniWin software • Suitable for heavy steel fabrication and industrial production Applications • Structural steel fabrication • Industrial metal cutting • Manufacturing of machine components and steel constructions Additional Information Sold as it is dismantling and shipping not included. Machine can be inspected under power by appointment. Further technical details, photos, and videos available on request.

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 1200603/R, type of input current: three-phase, working range: 6,000 mm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 3 mm, overall weight: 4,000 kg, input voltage: 380 V, total width: 3,000 mm, total height: 2,250 mm, total length: 7,600 mm, cutting height (max.): 20 mm, table height: 790 mm, table length: 6,000 mm, working width: 2,000 mm, table width: 2,000 mm, cutting current: 100 A, working length: 6,000 mm, input current: 31 A, travel distance X-axis: 2,000 mm, travel distance Y-axis: 6,000 mm, travel distance Z-axis: 200 mm, type of cooling: water, height adjustment type: mechanical, input frequency: 250 Hz, water tank capacity: 25 l, power: 3 kW (4.08 HP), Equipment: documentation/manual, HD Plasma Cutting System – Farina – 2000x6000 mm – Excellent Condition For sale: High-definition (HD) plasma cutting system by Farina, year 2003, in excellent working condition. This machine is a robust and reliable solution, ideal for heavy-duty fabrication and precision work on large formats. Technical specifications: - Brand: Farina - Year of manufacture: 2003 - Worktable dimensions: 2,000 x 6,000 mm - Generator: Hypertherm HD3070 (High Definition), synonymous with quality and precision in plasma cutting. - Included equipment: Dedicated dust extraction system and filters (MA-FER). - Software: Controlled via InfoLab software. - New torch: Original PAC186 torch, upgraded to HyPerformance HD3070 Key features: - Worktable dimensions ideal for handling large sheet metal. - Hypertherm HD3070 technology guarantees superior cutting quality compared to standard systems. Rodpfxozkhmds Amyjcd - Complete system with dust extraction, ready for use. - Robust machine, perfect for those seeking an excellent balance between investment and productivity.

Condition: ready for operation (used), Dimensions: Width: 180 mm Depth: 460 mm Height: 280 mm Year of manufacture: 2008 Cutting thickness: Quality cut 12 mm – Severance cut 14 mm Rcjdpfx Ajxfk Dzemysd

Condition: repair required (used), Year of construction: 2010, operating hours: 7,700 h, functionality: not functional, machine/vehicle number: 15158-10, working range: 4,000 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, CNC plasma cutting system BACH ThermoCut 2000 with pipe cutting device, TEKA dust extraction system, and plasma source. Manufacturer: BACH Maschinenfabrik GmbH Type: ThermoCut 2000 Year of construction: 2010 For sale is a used CNC plasma cutting system BACH ThermoCut 2000, including pipe cutting device, plasma source, dust extraction system, and complete piping. The system was used in our machine manufacturing company until recently and is suitable for cutting sheet metal as well as processing pipes. Technical data: Working area: 4,000 x 2,000 mm Plasma source: Thermal Dynamics Ultra-Cut 100 CNC control: myBach Pipe cutting device included Pipe diameter: min. 50 mm max. 320 mm Max. cutting thickness: Mild steel: up to 12 mm Stainless steel: up to 10 mm TEKA filter and dust extraction system included Complete dust extraction piping system included CE marking available Maintenance and condition The system was regularly maintained during its entire service life. Official maintenance by the manufacturer was last performed on August 20, 2013. After that, ongoing maintenance was carried out in-house. Filters of the TEKA dust extraction system were renewed approximately 6 months ago. Cutting torch head was renewed approximately 4 years ago. Cooling water filter is changed regularly, approximately once a year. The operating hour counter of the dust extraction system currently shows approximately 7,700 hours. Since the system was operated exclusively with the dust extraction system running, this value can be used as a good indication of the total operating time of the system. Known defect The system is currently not operational. After consultation with Voortman and Mr. Sobiech from Magma Industries, the cause is likely to be in the cooling circuit of the plasma source. According to the experts, the most likely causes of the fault are: Defective cooling water pump Defective flow sensor Leakage on the suction side of the cooling water system A final fault diagnosis has not yet been carried out. Spare parts for the installed Thermal-Dynamics plasma source are now only available to a limited extent. The machine is therefore explicitly sold as a system requiring repair or for refurbishment. Rsdpszizkysfx Amyjcd Scope of delivery BACH ThermoCut 2000 CNC system Thermal Dynamics Ultra-Cut 100 plasma source Pipe cutting device TEKA filter and dust extraction system Control panel with controller Dust extraction piping Accessories according to existing equipment Special features ✅ Pipe cutting up to Ø 320 mm ✅ Complete package including dust extraction ✅ Solid industrial machine made in Germany ✅ Easy-to-disassemble gantry design ✅ Also interesting for buyers who already have a suitable plasma source Location 24161 Altenholz, Germany Price Negotiable €21,900 Inspection possible by appointment. Sale exclusively to commercial businesses, excluding any warranty for defects. Loading / Dismantling The system is offered exclusively for self-dismantling and self-collection. The buyer assumes full responsibility for the dismantling, loading, and removal of the machine at their own cost and risk. To assist with loading, a hall crane with a maximum lifting capacity of 10 tons is available on site. Use of the crane can be arranged in advance. Due to the size and weight of the system, we recommend an inspection before submitting an offer.

Condition: new, Plasma cutter Erfi PS990 Manufacturer: Erfi Type: PS990 Plasma cutting machine ERFI PS990 - powerful, single-stage plasma cutter. Up to 20mm clean cut in steel, up to 25mm separating cut. Contact-free ignition by HF-ignition also on paint and rust by pilot arc. Includes 6m torch, standard filter and integrated pressure reducer with pressure gauge. The ERFI devices are produced with the utmost care in Germany - that is why ERFI always gives a guarantee of 3 years - without restriction. Technical data: Mains voltage 3x400V Frequency 50Hz Fuse protection 32A slow-blow Cutting current 60A level 1/ 90A level 2 Air pressure 6-10bar Weight 105kg Available immediately. For collection by the customer. Forklift available. Shipping also possible Rjdpfx Amezgu Rnjyscd Subject to errors and prior sale

Condition: used, cutting range for steel to 0,5 - 120 mm capacity at 100% 440 A mm cutting medium PerCut 451 dimensions ca. 1030 x 680 x 1450 mm weight ca. 600 kg water cooling unit KWE 360 control PGC Contour Cut Exact contours and holes in mild steel with a diameter to material thickness ratio of 1:1 (Diameter:material thickness Contour Cut Speed Contour cutting in mild steel with similar quality and up to 50 % higher speed Silent Cut Cutting of mild steel with reduced sound pressure level HiFinox Plasma cutting of stainless steel and aluminium from 1 to 6 mm with significantly less dross Ar/H2 Mix Excellent cutting results thanks to active mixing of single gases for stainless steel and aluminium starting from 6 mm Marking, notching, punching Individual labeling of the material Rcodpfozginhjx Amyed The HiFocus 440i neo is one of the most flexible and most powerful high-precision plasma cutting units worldwide. Its wide cutting range from 0.5 mm to 120 mm means considerably higher flexibility. The inverter technology allows the highest marking quality and functionality. The HiFocus 440i neo is ideally suited for steel service centers, steel producers and distributors because it can be combined with 2D or 3D CNC-controlled guiding systems like gas cutting machines, robots and pipe cutting machines. With HiFocus neo the user benefits, compared to competitors, from higher speeds when cutting and marking electrically conductive materials, ensuring at the same time excellent quality and low process costs. Thanks to optimised technology, the consumables are handled gently and the plasma cutting process is more efficient

Condition: used, Year of construction: 2019, Waterjet cutting machine with plasma Manufacturer: TCI Cutting Type: BP-C 4020 Year of manufacture: 2019 CNC control: TCI CNC 4.0 Working area: 4 x 2 m Equipment: 1 KMT OEM SL-VI 50 PS 4,000 bar cutting head with high-pressure pump 1 Plasma cutting head with Hypertherm XPR300 power source High-voltage control system TCI SRA 4.0 Abrasive transfer system Abrasive metering system Collision protection system Water treatment system TCI HIDROSYSTEM 2.0 Rjdpfxsykqwts Amyecd Sludge removal system Software: Lantek Expert 2D with automatic nesting function 22726

Condition: used, Year of construction: 2017, CNC gantry plasma cutting machine (beveling unit) Manufacturer: Zinser Type: 2425-I/3600 Year of manufacture: 2017 CNC control: 5010 Rsdpfjw Rpvbsx Amyocd Travel length: 11 m Oxy-fuel cutting table with oscillating conveyor system, including dust extraction system Dimensions: 2,000 x 8,000 mm 1 plasma torch with Hypertherm XPR300 power source Automatic gas console Includes automatically rotating plasma beveling unit Bevel System 2015/350 Downflow 3DFP9-SP filter system Power: 9 kW Laser diode 22726

Condition: used, Year of construction: 2016, CNC plasma cutting machine Manufacturer: Microstep Type: MasterCut Eco (A) Plus Year of manufacture: 2016 CNC control Rsdpfx Asy Auxmjmyjcd Working area: 1,500 x 3,000 mm 1 x plasma cutter with Kjellberg HiFocus 161i power source Prepared for retrofitting with an oxy-fuel torch Kemper System 8000 filter system with pre-separator Asper Basic nesting software on the CNC control ä22726

Condition: used, Year of construction: 2014, Plasma cutting machine Manufacturer: Microstep Type: MasterCut-P 3001.20 Year of manufacture: 2014 Operating hours approx.: 7,024 Control system: iMSNC Working area: 3,000 x 2,000 mm 1 Plasma torch power source Kjellberg HiFocus 280i neo with universal gas console Integration of the HiFocus 280i plasma source into the control system Remote maintenance access via TeamViewer 15 m hose package Without fume extraction 1 x nesting software Asper Win Basic + automatic nesting Rsdpfx Amoypdl Ieyecd on the machine control system 22726ä Universal gas = enables changing the gas to adapt the cutting quality and cutting speed to the material.

Condition: used, Year of construction: 2005, CNC gantry plasma cutting machine Manufacturer: Messer Type: Omnimat L8000 Year of manufacture: 2005 CNC control: Global Control Plus Track gauge: 8,000 mm Equipment: 1 x oxy-fuel bevel cutting unit DAF/L for weld preparation (bevels) Rcedsykruaepfx Amyod 1 x skew rotator with Kjellberg FineFocus 800 power source 3 x oxy-fuel torches ALFA 1 x marking unit FineMarker Without table, filter, and track ä22726

Condition: used, Year of construction: 2023, CNC plasma cutting machine Manufacturer: Messer Cutting Systems Type: MetalMaster 2.0 6025 Year of manufacture: 2023 CNC control: Global Control 2.0 Working area: 2,500 x 6,000 mm 1 x plasma torch with Kjellberg HiFocus 280i neo power source Automatic gas control unit Filter system Donaldson DFPRO 6 Cyclopeel Cutting software Omniwin Standard Availability: immediate Rcsdpfx Asyhd Rbjmyed ä22726

Condition: used, Year of construction: 2011, CNC gantry plasma cutting machine Manufacturer: Eckert Type: Jantar 2 Year of manufacture: 2011 CNC control Working area: 2 x 4 m 1 plasma torch with Kjellberg HiFocus 161i power source Rcedjy Nqcbjpfx Amyod Automatic gas console Extraction table 22726

Condition: good (used), Year of construction: 2008, CNC gantry plasma cutting machine Rcedpeiff Dajfx Amyod Manufacturer: Messer Type: Multitherm 4000 CNC control: Global Control Plus Year of manufacture: 2008 Retrofit: 2019 Extraction table: 2,000 x 3,000 mm 1 oxy-fuel torch ALFA 1 plasma torch Power source: Kjellberg HiFocus 280i Filter system: Z-Line 9 ZDC We have our own technicians available for installation, commissioning, and training! All spare parts are in stock. 22726

Condition: excellent (used), I sell plasma cutter hypertherm powermax 800 d very good condition. /////Price listed for 1 pc ///// Plasma cutter Hypertherm Powermax 800 Rcodpfeulc Ixox Amysd Plasma cutter description The Powermax800 plasma cutting system uses an inverter power supply to provide a smooth DC output voltage for superior cutting and gouging of mild steel, stainless steel, aluminum and other metals. The Powermax800's power supply provides a constant output current that varies from 20 to 50 amps, providing optimal performance for all metal thicknesses up to 1/2 inch (12 mm). At 50 amps, the Powermax800 can cut metals up to 3/4 inch (20 mm) thick and cut metals up to 1 inch (25 mm) thick.