Used Ixion Ia 1 Tlf-660.4 for sale (79,620)

Condition: like new (used), Year of construction: 2019, clamping force: 1,000 kN, Equipment: documentation/manual, Clamping force: 100 t Screw diameter: 32 mm Shot volume: 103 cm3 Type: Horizontal Drive: Electric FANUC Roboshot α-S100iA : Basic Technical Specifications Mechanism: Double toggle Clamping force: 1000 kN / 100 tonf _(opt. 1250 kN / 125 tonf)_ Die height double platen: 150–450 mm _(opt. 150–550 mm)_ Die height single platen: 220–520 mm _(opt. 220–620 mm)_ Clamping stroke: 350 mm Locating ring: Ø 125 mm Tie bar spacing (H×V): 460 × 410 mm Platen size (H×V): 660 × 610 mm Min. mould size (H×V): 265 × 240 mm Ejector stroke: 100 mm Max. ejector force: 25 kN / 2.5 tonf _(opt. 60 kN / 6.0 tonf)_ 1. Clamping force: 1000 kN 2. Injection speed: 200 mm/s 3. Max. injection pressure: 2200 bar 4. Min./Max. mold height: 150 mm / 620 mm (extended) 5. Clamping stroke: 350 mm 6. Tie bar spacing: 460 × 410 mm 7. Ejector stroke: 100 mm 8. Screw diameter: 32 mm (103 cm³) 9. Screw/barrel: W/C (hardened, high wear and corrosion resistance, up to 350 °C, 30% GF) 10. Nozzle: Standard open R19D4 Control & Software (FANUC 31i-B CNC) 1. 15" LCD touchscreen 2. SI unit (kN, MPa...) 3. Password-protected screen lock 4. AI pressure profile trace function 5. AI metering control function 6. AI mold protection function 7. AI ejector protection function 8. Backflow monitor function 9. Precise metering 2, 3 10. Auto purge function 11. Extruder delay timer function 12. High precision V-P switch function 13. Injection unit temperature control and display 14. Automatic mold height adjustment 15. 2-stage ejection 16. Ejector delay function 17. Pre-ejection function 18. Optimal energy consumption function Standard Machine Equipment Isdpfszktkzex Apcoig 1. Extended mold height 2. 4-circuit rotameter 3. Automatic mold height adjustment 4. Hopper slider 5. 3-color LED signal lamp 6. Automatic purge and material cleaning function 7. Plasticizing speed control 8. Decompression control additional function 9. Backflow monitoring function 10. AI mold and ejector protection 11. Mold protection output on moving platen 12. Energy consumption measurement function 13. Robot interface (Euromap 67) 14. Auto stop/shutdown mode 15. 3 independent air valves 16. 8 digital outputs, 11 digital inputs 17. Pre-injection / injection compression function 18. Cascade injection valve control (up to 8 valves) 19. USB and memory card output 20. Tool kit (standard tools + grease gun) 21. User manual (Hungarian) 22. Warning labels (Hungarian)

Condition: ready for operation (used), Year of construction: 2018, operating hours: 116 h, overall weight: 180 kg, number of axes: 6, This 6-axis FANUC M-10iA / 8L robot arm was manufactured in 2018. It features a maximum reach of 2032 mm, a sound power level of 57.4 dB, and operates within an ambient temperature range of 0-45°C. The robot includes an R-30iB Plus controller and supports a maximum wrist load of 8 kg. Consider the opportunity to buy this FANUC M-10iA / 8L robot arm. Contact us for more information about this machine. Iedezvvquepfx Apcoig • Availability: 2 units • Condition: barely used • Controller: R-30iB Plus • Electrical supply: 380–575 V, 50/60 Hz, 3-phase • Average power: 1 kW • Integrated signals on upper arm (stop signals): 8 In / 8 Out • Integrated air supply: 1 • Sound power level: 57.4 dB • Ambient temperature: 0–45 °C • Protection rating (mechanics): IP54 (standard/optional) • Protection rating (wrist & A3 arm): IP67 (standard/optional) • Robot footprint: 343 x 343 • Max. weight on wrist (payload): 8 kg • Max. reach: 2032 mm • Repeatability: 0.03 mm

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: 1406, total width: 2,500 mm, total length: 2,710 mm, total height: 3,000 mm, overall weight: 10,000 kg, maximum load weight: 330 kg, loading space volume: 3.3 m³, air pressure: 7 bar, Tonello 330 HS Industrial Garment Washing & Dyeing Machine Large-Capacity 3300 L Industrial Garment Wet-Processing Machine with B&R Touchscreen Control The Tonello 330 HS is a large-capacity industrial garment washing and wet-processing machine manufactured by Tonello S.r.l. (Sarcedo, Italy), the leading garment-finishing technology brand. The 330 class (3300 L drum) handles industrial washing, dyeing, softening, bleaching and stone-wash / enzyme effects on denim and garments at production scale. This unit (MASI in-house reference "Pesumasin No 3") was in professional denim-finishing production until factory shutdown. The machine body dates from 2000 and the complete electrical control system was rebuilt in 2014 with a new Tonello / B&R panel. Technical Specifications • Manufacturer: Tonello S.r.l. (Italy) • Model: G1 330 HS • Serial / Matricola: 1407 • Year: machine 2000 / electrical control rebuilt 2014 • Basket / Drum Volume: 3300 L • Power Supply: 380–400 V, 3-phase + GND, 50 Hz • Installed Power: 27 kW (machine plate) / 14 kW (2014 control plate) • Air Pressure: 7 bar · Max Steam Pressure: 3 bar · Hydraulic Pressure: 10 bar • Weight: 10,000 kg • Supply Cable: 25 mm² • Country of Manufacture: Italy Key Features • Large 3300 L stainless drum for high-capacity garment wet processing • B&R Power Panel 300 touchscreen HMI (rebuilt 2014) with programmable cycles • Yaskawa Varispeed 616G5 variable-frequency drum drive • Mettler Toledo weighing controller and Siemens Sitrans flow metering Iijdjzmvgwspfx Apceg • Automatic chemical dosing system • Steam, water, air and hydraulic services • Front loading door with sight glass Includes • Tonello 330 HS washing machine with stainless drum • B&R touchscreen control cabinet and pushbutton console • Yaskawa VFD and PLC electrical cabinet • Chemical dosing system, pumps and instrumentation Applications • Industrial denim and garment washing • Garment dyeing and over-dyeing • Softening, bleaching, enzyme and stone-wash effects • High-volume garment wet processing Condition • Working — main machine functional (per factory records) • Video recorded 19.3.2026 • Previously in professional denim-finishing production (MASI "Pesumasin No 2") • Machine from 2000 with 2014 electrical-control rebuild • Typical wear/dust from a wet-processing environment • Available for inspection under working conditions before dismantling Location Valga, Estonia Dismantling & Transport Buyer responsible for dismantling, loading, transportation. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI Jeans factory liquidation. Part of the Tonello industrial laundry line (available individually or as a complete line).

Condition: used, Year of construction: 2024, The lot consists of 2 Staubli manipulator robots and 1 Fanuc manipulator robot. Isdpfx Ajzzv Ukspceig

Condition: used, Year of construction: 2013, x-travel 500 mm y-travel 400 mm z-travel 330 mm weight of the machine ca. 2100 kg Iijdey Nn Dvopfx Apcsg

Condition: like new (used), Year of construction: 2019, operating hours: 400 h, clamping force: 1,000 kN, screw diameter: 32 mm, displacement volume: 103 cm³, injection pressure: 2,200 bar, mold height (min.): 150 mm, ejector force: 25,000 N, ejector stroke: 100 mm, opening stroke: 350 mm, number of injections: 1, Equipment: documentation/manual, FANUC ROBOSHOT Alpha S100iA – like-new, fully electric precision injection molding machine, manufactured in 2019, with only 400 operating hours. Ijdpfx Aezrikmepcsig Your advantages: • 1,000 kN clamping force • FANUC 31i-B CNC control with a 15-inch touchscreen • 32 mm screw and 103 cm³ injection volume • Injection speed up to 200 mm/s, maximum 2,200 bar • Hardened W/C plasticizing unit – for temperatures up to 350 °C and up to 30 % glass fiber • Euromap 67 robot interface Tool space and clamping unit: • Plate dimensions 660 × 610 mm • Tie bar spacing 460 × 410 mm • Mold height 150–620 mm, extended version • Opening stroke 350 mm • Ejector stroke 100 mm, ejector force 25 kN Equipment includes, among other things: AI pressure and dosing control, tool and ejector protection, backflow monitoring, automatic tool height adjustment, energy consumption measurement, four-circuit flow meter, hopper slide, three-color LED signal light, three air valves, and cascade control for up to eight needle gate valves. Hungarian operating manual and warning instructions are available. A robot is not included in the scope of supply. Inspection by appointment. Further technical documents and the offer are available upon request.

Condition: used, Year of construction: 2000, grinding diameter 500 mm grinding length 1000 mm centre height 250 mm -major maintenance -New table geometry -partial painting of the interior grinding wheel equipment LEFT 400x63x127mm (standard) grinding wheel equipment RIGHT 300x40x127mm Internal grinding unit Ø120mm for HF spindles Iisdpfx Asxzk Nijpceg CNC control KELCO 120 C-axis for non-circular grinding. Kel-Poly B-AXIS: CNC-controlled B-axis KELCO 120: v constant 35m/s or 45m/s High-frequency internal grinding spindle Operating unit for MFV and MFZ spindles Hydraulic quill retraction for the tailstock NO micro-adjustment on the tailstock Spring-loaded quill insert Top table cooling Standard workpiece headstock MK 5 DIN 55026 size 5" Micro-adjustment for the standard workhead Dressing device on the lower table Active longitudinal positioning KELPOS, MARPOSS, mounted on the grinding head Tool measuring system KELSET, MARPOSS MARPOSS gate sensor Measuring control MARPOSS Minialsar prepared Paper belt filter

Condition: used, Year of construction: 2018, operating hours: 69,000,000 h, functionality: fully functional, Folder gluer machine Folding carton with longitudinal seam: max. 1,150 × 600 mm Iiedpfx Apjyg Edgjcsg min. 75 × 55 mm min. 45 × 55 mm (with small carton device) Crash-lock bottom carton: max. 1,150 × 600 mm min. 146 × 80 mm 4-corner box (erected): max. 1,150 × 680 mm min. 120 × 110 mm 6-corner box (erected): max. 1,150 × 630 mm min. 250 × 130 mm With BELKHOFF control system Roller and drying tunnel TÜNKERS EAS 480 delivery station, right-hand, year of manufacture 2019

Condition: good (used), Year of construction: 1999, power: 16.5 kW (22.43 HP), pressing force: 115 t, stroke length: 250 mm, operating speed: 10 mm/s, table width: 95 mm, table length: 4,100 mm, throat depth: 300 mm, distance table to ram: 350 mm, clearance between the columns: 3,700 mm, total length: 4,800 mm, total width: 2,200 mm, total height: 3,600 mm, overall weight: 18,500 kg, distance between stands: 3,700 mm, Press brake, bending length 4100 mm, capacity 115 to, control DELEM DA 65, gap between column 37000 mm, stroke 250 mm, throat gap 300 mm, motor 16,5 KW, back gauge 800 mm motorized, dimension 4800x2200x3600 mm, weigth ca. 1850,0 kgs, tools Ijdpfxezzpwls Apcoig

Condition: used, Year of construction: 1990, machine/vehicle number: 356.8.300, Single capping head; Working direction: left-right; Without cork orientator. Ijdpezz Rnfefx Apceig

Condition: ready for operation (used), functionality: fully functional, power: 228 kW (309.99 HP), fuel type: diesel, axle configuration: 4x4, fuel: diesel, From our immediately available stock of used vehicles, we offer you: TLF 4000 all-wheel drive on a rugged MB 1831 AK 4x4 all-wheel drive chassis Chassis: • Mercedes Benz MB 1831 AK 4x4 with 310 hp (230 kW) • Twin tires on the rear axle for high driving stability • rear tire chains • Year of manufacture 1996 • GVWR 17,000 kg • Mileage approx. 22,500 km Cab: • standard long crew cab (1:2) in RAL 3024 (daylight fluorescent red) • storage compartments behind the seats Superstructure: • high-quality Ziegler superstructure in RAL 3024 (daylight fluorescent red) • 2 flexible and spacious equipment compartments per side of the vehicle • fold-out steps for each side equipment compartment • mountings for standard equipment and space for individual additional equipment • walkable, non-slip vehicle roof Vehicle pump/fire extinguishing agent tank: • Ziegler fire extinguishing centrifugal pump • Output of more than 2,400/min at 8 bar • Built-in foam mixing system • Water tank 5,000 l and foam tank 500 l • Rear flap as protection against freezing in the equipment/pump compartment Firefighting equipment: • Quick attack system with 50 m kink-resistant hose and electric hose reel • Foam/water monitor on the vehicle roof Safety and lighting • 2 blue warning lights on the cab/2 LED front flashing lights • Additional blue light elements on the superstructure • pneumatic special signal system • Public address system • Rear warning device • Hygiene board available on request Isdpezi Ucpofx Apcjig We would be happy to provide you with a detailed offer and show you the vehicle in detail at our location in Berlin.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: E15631937, overall weight: 220 kg, controller model: R-30iB, Robot in very good condition, paired with a machine tool for loading/unloading, currently out of service. Iodpfozhi Tgox Apcjig

Condition: used, Year of construction: 2002, grinding diameter 450 mm grinding length 1500 mm centre height 225 mm Control FAGOR EQUIPEMENT - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - T6: HF Fischer spindle MFV or MFZ 1224/1242/1260 - T7: HF Fischer spindle MFV or MFZ 1224/1242/1260 - Marposs tool measurement - active longitudinal positioning - Elaso GAP-control on T1 and T2 contactless integrated in the control surface - Elaso GAP internal grinding with fluid sensor for T6 and T7 - semi-automatic balancing by Elaso integrated in the control surface for T1/T2 - tailstock hydraulic with fine adjustment +/- 150 microns - dresser on workpiece spindle side table mounted - dresser on tailstock side table mounted - dresser on upper table - new service- and userfriendly housing SPECIAL EQUPEMENT: Workhead with direct drive - strongly recommended for non-circular grinding - workpiece weight flying max. 75kg - workpiece weight between centres 150kg - water-cooled B-axis with direct drive - center height 225 mm - extremely torsionally stiff - highly accurate positioning - resolution ° - water-cooled Hydrostatic ball screw - x-axis - wear-free, as there is no contact during operation - no loss of precision, even during long-term use at full load and maximum speed - no friction at low speeds - no friction force backlash when the direction of rotation changes - translates even the smallest rotational movements - no stick-slip effect even at low speeds - no fluctuations in frictional torque due to ball circulation - higher axial stiffness compared to ball screws - significant improvement in damping, resulting in better workpiece surface finish and tool life - no oscillations due to ball circulation - also suitable for high speeds and accelerations - cost-effective alternative to the linear motor with greater precision and significantly lower heat generation - significantly less power dissipation and, as a result, no problems with swarf on permanent magnets New hydraulic unit - optimized temperature control (chiller) - Energy-saving Only one pump controlled by VFD - Pressure monitoring - monitoring of the hydrostatic oil for water content. (Damage to the bellows is recognised and detected prematurely) -fine adjustment +/- 150 microns Paper belt filter 375l – alternative 480l Grinding mist extraction system – emulsion MECHANICAL OVERHAUL -complete machine according to Kellenberger protocoll -new painting ELECTRICAL OVERHAUL - new modern Fagor CNC with BEMA HMI - new electric cabinet - new digital drive technology - replacement of all electrical cables, switches etc. - new absolute external scales in x- and z-axis - new absolute encoder (B-axis) Grinding software BEMA-Standard: - workpiece zeroing - grinding wheel zeroing - dressing diamond measuring - corrections - external and internal surface grinding - external and internal angle grinding (turning of the b-axis, dressing with straight wheel) - external and internal radius grinding (radius dressed on wheel) - semi-automatic traverse grinding - workpiece zeroing - 2 dressing diamonds - 1 dressing blade - dressing roll - 3 flat dresser - corrections - Z-position measurement - GAP control Iodpfx Apouxfu Nscjig Optional grinding cycles at no extra charge: Profile plunge grinding: - external and internal profile plunge grinding with profile wheel Pr...

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 9941 / 09/20, inner dimension width: 1,100 mm, inner dimension length: 660 mm, No minimum price – guaranteed sale to the highest bidder! EXW – Dismantling and loading must be arranged by the buyer! TECHNICAL DETAILS Working area (H x W x D): 550 / 800 × 1,100 × 660 mm MACHINE DETAILS Air pressure: up to 8 bar Dimensions & Weight External dimensions: 1,785 × 1,250 × 1,250 mm Other dimensions: 1,300 × 1,300 × 1,700 mm Weight: approx. 350 kg Isdpfx Aszx S Iuspcjig Working floor load: max. 350 kg Voltage supply: 230 / 400 V, PE/N Mains frequency: 50 Hz Fusing: 3 × C16 A Rated current L1: 0.8 A Rated current L2: 0.7 A Rated current L3: 0.6 A EQUIPMENT Operating manual CE / conformity documents

Condition: like new (used), Year of construction: 2008, Retrofitted: 2026 Numerical control: SIEMENS 840D Iisdsyvwchjpfx Apcsg Technical features Dimensions Table dimensions: OptionalNumber of T slots: UndefinedT slots dimensions: Undefined Traverses of axis X axis traverse: 10000 mmY axis traverse: 1500 mmZ axis traverse: 2500 mmVertical capacity (VC): 0 / 2500 mm (adjustable) Milling head Head type: Universal Auto-indexing UAD (0,1º)Tool clamping system: HydraulicTaper nose: ISO 50 (DIN 69871) / Pull stud: DIN 69872Speed range: 20 - 6000 rpmSpindle power: 30 kW Feedrates Rapid feedrate (X / Y,Z): 30000 mm/min Weight and dimensions Maximum weight on table (kg/m2): OptionalMachine weight approximate: 70000 kgMachine dimensions approximate: 17560 x 12800 x 4270 mm Accessories Guarding: pendular with automatic front door and perimetral wire-mesh fenceAutomatic tool changer: ATC80 with electrical motorsChip conveyor: 1 front longitudinal and 1 transversalElectronic handwheel: 6FX2007-1AE14 SiemensCoolant: external internal high-pressure through spindleOperator’s cabinet: adjustable in vertical traverse Other technical features 2 ROTARY TABLES:Model:   DEMMELER DRLTS1800Table surface: 2400 x 1800 mmMaximum load on table: 40 TT slots number: 9T slots dimensions: 22 mmRotary axis: HydrostaticMaximun speed (S1/S6): 3.4 / 5.4 rpmClamped tangencial torque: 175000 NmW axis: 1500 mm.Maximum feedrate: 20000 mm/min.Quantity of guideway (W axis): 4 Sale conditions Warranty: 6 months mechanical partsPrice and sale conditions: On request View all technical features

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 27611, overall weight: 505 kg, 24-needle universal portal embroidery machine for single motifs and border embroidery as well as tubular goods and cap embroidery. Delivered with complete machinery equipment, ready for operation. Application: Control unit: T8-2 operating panel Thread cutter: integrated Embroidery speed: max. 1,000 stitches/min. Number of embroidery heads: 1 Iisdjyrqryopfx Apcog Border frame: 700 x 700 mm max. Embroidery area single frame tubular goods: 405 x 395 mm Cap frame: 70 x 360 mm Embroidery area depth, border: 700 mm Power supply: Single-phase AC, 230 volts, 50 Hz. Basic machine price includes: Cross laser Light barrier Thread cutting device Cap device with 2 cap frames per head Clamping aid for cap frames Border clamping elements

Condition: ready for operation (used), Year of construction: 2013, TECHNICAL DATA Brand: FANUC Model: ROBODRILL α-D21LiA5 Year: 2013 CNC: FANUC 31i-MODEL B5 Serial Number: P135 YH478 TABLE DIMENSIONS Table size: 850 x 410 mm Load capacity: 300 kg T-slot spacing: 125 mm Number/size of T-slots: 3 x 14 mm TRAVELS X-axis travel: 700 mm Y-axis travel: 400 mm Z-axis travel: 330 mm Distance from table to spindle nose: 150 to 480 mm FEEDS Rapid traverse X/Y/Z: 54 m/min Cutting feedrate: 1 to 30 m/min MOTORS Drive motor: 11 kW (1 min) / 3.7 kW continuous Feed motors X/Y/Z: α8/4,000is (2.9 kW) Iiodpfxsy At Aqj Apcsg TURRET Taper: MAS BT 30 Drawbar type: MAS P30T-1 (45°) Column to spindle center distance: 400 mm PRECISION Positioning accuracy: 0.006 mm Repeatability: ±0.004 mm Tool magazine capacity: 21 Maximum tool length: 250 mm Tool change time: Approx. 1.8 s SPINDLE Spindle speed range: 100 to 10,000 rpm Spindle taper: 7/24 Taper No. 30 Internal cooling MACHINE DIMENSIONS Machine height: 2,236 ± 10 mm Floor space required: 2,115 x 2,040 mm Machine weight (including control section): Approx. 2,100 kg POWER SUPPLIES Electrical supply: 11 kVa Compressed air requirement: 0.35 to 0.55 MPa (gauge pressure) (0.5 MPa recommended), 0.15 m3/min (150 l/min) (at atmospheric pressure) ACCESSORIES Original FANUC 4th axis rotary table DDR (new price €18,000) Zero point clamping system Schunk NSE plus 138-V1 mounted on rotary (new price €2,100) Two Schunk KONTEC KSM2 90-400 vices (new price €2,000 each)

Condition: good (used), Twin-spindle drilling machine, row drilling machine, drilling machine, bench drilling machine, pillar drilling machine Iisdpfob D I Dtex Apcjg -Spindle mount: B10 -Table size: 770 x 300 mm -max. intermediate dimension: mm -Protrusion: 200 mm -Speeds: 250-4000/365-4150 rpm -Spindle stroke: 100 mm -Dimensions: 960/970/H1600 mm -Weight: 512 kg

Condition: like new (used), Year of construction: 2011, Retrofitted: 2026 Numerical control: HEIDENHAIN TNC-i530 Ijdpfezcz Srex Apceig Technical features Dimensions Table dimensions: 10000 x 2250 mmNumber of T slots: 9T slots dimensions: 22 mm Traverses of axis X axis traverse: 10000 mmY axis traverse: 1500 mmZ axis traverse: 2500 mmVertical capacity (VC): 150 - 2650 mm  (adjustable) Milling head Head type: Universal Auto-indexing UDG (2.5º)Tool clamping system: HydraulicTaper nose: ISO 50 (DIN 69871) / Pull stud: DIN 69872Speed range: 3000 rpmSpindle power: 30 kW Feedrates Rapid feedrate (X / Y,Z): 30000 mm/min Weight and dimensions Maximum weight on table: 15 Tn/m2Machine weight approximate: 56000 kgMachine dimensions approximate: 16520 x 8575 x 5290 mm Accessories Guarding: front sliding doors and new perimetral wire-mesh fenceAutomatic tool changer: ATC40Chip conveyor: 1 longitudinal rear hinge typeElectronic handwheel: HR-410Coolant: external internal high-pressure coolant through spindle Sale conditions Warranty: 6 months mechanical partsPrice and sale conditions: On request View all technical features

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Kasto Kastodisc M10 Vertical Circular Saw, Metal Cutting Saw Manufacturer: Kasto Type: Kastodisc M10 Metal Cutting Saw Year of Manufacture: 2009 Ijdsztyldepfx Apceig Condition: Used, very good, ready for demonstration Scope of Delivery: - Documentation - Coolant system - 1 x Saw blade (used) - Material stop, 1000 mm

Year of construction: 2014, condition: used, Number of sanding units 6 St. sanding width 180 mm Sanding height max. 150 mm STAEHLE Grinding Machine Type Gloria/Saturn E 180 RF ----- Stähle Hess Finish Grinding Machine Type Saturn E 180 RF (formerly Gloria) with 2 grinding units, plus top and bottom Roto Finish grinding attachments. 1 upper grinding belt Iedpfex Dng Dsx Apcoig 1 lower grinding belt 2 upper Roto Finish grinding attachments 2 lower Roto Finish grinding attachments For a detailed description, please see the accompanying PDF from the manufacturer. Sold on behalf of a customer. The images are from our archive and were taken before the machine was delivered to the customer. (Technical specifications according to the manufacturer - without guarantee!)

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Fanuc M Series Robot Unit Complete - Type: M1IA0.5A-30P-O-CE..+ The M-1𝑖A/0.5A is a high-speed, 6-axis Delta robot, ideal for compact, high-speed order picking and assembly applications. With a payload of 0.5 kg and a work envelope of up to 280 mm, this robot is perfect for small parts handling processes requiring high versatility in industries such as electronics, precision engineering, food, medical and pharmaceutical. Its unique delta design mechanism is ideal for fast, dexterous assembly applications. It can also easily cover an additional range of applications by simply adding another optional 500 g of payload. - Robot: M-1iA/0.5A - Robot type: Delta / parallel robot - Axes: 6 - Standard payload: 0.5 kg - Optional payload: up to 1 kg - Reach: 280 mm Iedpfjzzpuwex Apcjig - Repeatability: ±0.02 mm - Weight: FANUC lists the mechanical unit itself at around 17 kg in some documentation. - Mounting: floor, ceiling/inverted or angled - Protection: IP20 - Typical controller: R-30iB Plus / R-30iB Mate Plus depending on configuration.

Condition: used, Year of construction: 2015, machine/vehicle number: 315031/02, working width: 1,800 mm, workpiece length (max.): 3,000 mm, workpiece height (max.): 25 mm, TECHNICAL DETAILS Iedpfszypm Dex Apcjig Workpiece dimensions Maximum length: 3,000 mm Minimum length: 400 mm Maximum width: 1,800 mm Minimum width: 200 mm Maximum thickness: 25 mm Minimum thickness: 3 mm Maximum deflection: 1 mm Maximum paper roll diameter: 500 mm Paper web width: 1,980 mm Maximum working width: 1,800 mm MACHINE DETAILS Minimum temperature: -5 °C Operating speed: 0.8–2 m/min Voltage: 400 V Frequency: 50 Hz Pressure: max. 6 bar EQUIPMENT Roller conveyor TVR18/2000 Working width: 1,800 mm Speed: 0.35–6.1 m/min Roller diameter: 66 mm Roller spacing: 125 mm

Condition: ready for operation (used), functionality: fully functional, Storti QGS 77/1 block cutter With 3 meter block extraction belt Operating Isdpfxjzkubbo Apceig

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 034108905, BOBST 100 II - A2 folding and gluing machine, manufactured in 1999. This efficient machine is designed for the production of straight-line packaging and packaging with a crash-lock bottom, handling cardboard and corrugated board. It features 6 cold glue applicators and one hot glue applicator. It also has a wheel-fed glue system with a container. It glues at 6 points – with various glue application methods. It includes a cassette for gluing envelopes. The HHS system in this version is very good – it can be used to produce envelopes, Advent calendars, and boxes. The machine can be inspected at our printing facility in Szczecin. Iedpfxozwmvqj Apcoig