Used Ideal Document Shredder for sale (15,320)

Condition: new, Year of construction: 2026, Machine with special rotor Advantages: + special rotor with reduced knife protrusion + Motor 22 kW + effective square knife * for pallets: up to 10 pallets per hour * depending on the sieve and material. With smaller residual wood, significantly more. Engine: 22 kW; 400 V - 50 Hz - 3 ph, Sieve: 15/20 mm Ledpfxjdv Eu Hj Af Ssrt hydraulically operated slide Current screen perforation (15/20 mm) * can be exchanged Extraction nozzle Ø 200 mm. Feed opening 1000x1000 mm Dimensions: 2000x1800x1645mm Example image above: The color of the system may vary Weight: 1920 kg. Included as standard: - Control cabinet with PLC control - automatic star / delta start - fast hydraulics - automobile. OFF when the rotor is idling - Speed ​​70-90 rpm for high throughput - cycle control to avoid idle times, - performance-increasing step control of the hydraulic slide, - Pertinax guides for hydraulic slides, - vibration-damping machine feet, - CE conform. The following options are available at an additional cost: - Additional row of knives + € 2,790 - segment bottom + € 6,890 (recommended for materials with a wall thickness thinner than 3 mm) - Special K-rotor storage + € 3,480 If necessary, consider shredding plastic with sieves smaller than 15 mm or with a lot of fines. If the bearings are lubricated with grease every approx. 4 weeks in operation, this is not necessary) - Raise the shredder by 30 cm (preparation for conveyor belt) + € 2.480 net - Angled conveyor belt (discharge height approx. 220 cm) + € 12.980 net - Overbelt magnet + € 5.980 net - Control conveyor belt and overbelt magnet + € 2.750 net (Start and stop synchronized with the hacker) - Exhibition hopper 1500x1500 mm + € 3.480 net Requirements for the raw material: - The moisture content (atro) must be below 30% - The loading must be free of metals and mineral impurities. This can result in damage to the tools and / or increased wear

Condition: excellent (used), CATALOGUE NUMBER 8039 TECHNICAL DATA - inlet width 320mm - inlet height 160mm - roller width 320mm - blade length 310mm - number of blades 2 pcs - toothed drive roller, top Lredpfx Aozkvgljf Sjt - toothed drive roller, bottom - vibratory feeder with magnet 1650x310mm - automatic reversing - main motor 22kW - feed motor 2×1.1kW - machine dimensions with vibratory feeder (length/width/height) 2600x1500x1800mm - machine and vibratory feeder weight approximately 1500kg ADVANTAGES – Austrian made – vibratory feeder with magnet 1650mm – automatic reversing – original DTR documentation – used shredder, very good condition Net price: 34900 PLN Net price: 8310 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to significant fluctuations)

Condition: excellent (used), Catalogue number 7361 TECHNICAL DATA - Feed opening width: 400mm - Feed opening height: 180mm - Shaft width: 430mm - Shaft diameter: 430mm - Knife length: 430mm - Number of knives: 2 pcs - Sieve dimensions: 60x60mm - 2 lower feed toothed rollers - Motor for lower rollers: 1.8kW - 2 upper feed toothed rollers - Motor for upper rollers: 1.8kW - Belt feeder - Feeder belt length: 2200mm - Feeder belt width: 330mm - Main motor: 22kW Lredpfx Aeztq N Tjf Set - Autoreverse - Reverse function - Overall dimensions (L/W/H): 4100x1350x1100mm - Weight: 1800kg ADVANTAGES – German production – Autoreverse (adjustable) – Reverse function – Used shredder, very good condition Net price: 66,900 PLN Net price: 15,920 EUR (based on exchange rate 4.2 PLN/EUR) (Prices may change with significant rate fluctuations)

Year of construction: 2023, condition: excellent (used), meant working condition, 6m pipe shredder with granulator and double bag stand Lrsdpfjz Ektysx Af Sot shredder motor 37kw x2, granulator motor 90kw output capacity 700-800kg p/h

Condition: excellent (used), CATALOG NUMBER 7614 Technical specifications: - inlet width 550mm - inlet height 220mm - shaft width 630mm - blade length 630mm - number of blades 2 pcs - screen dimensions 60x60mm - 2 toothed drive shafts from below - motor for lower shafts approximately 1.5kW - toothed drive shaft from above - motor for upper shaft approximately 1.5kW - vibratory feeder - vibratory feeder length 4750mm - vibratory feeder width 450mm - main motor 45kW - vibratory feeder motor 1.5kW - auto-reverse - reverse gear - overall machine dimensions (L/W/H) 3200x1700x1400mm - overall machine dimensions (L/W/H) 4750x800x1100mm - weight approximately 4500kg ADVANTAGES – auto-reverse (with adjustment option) – reverse gear – used shredder, very good condition Ljdpfjza Eipjx Af Sert Net price: 120900 PLN Net price: 28116 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)

Condition: good (used), Shredding machine Rotor approx. 250 mm Hydraulic slide Feed opening approx. 600 x 800 mm Rotor length approx. 600 mm Motor 18.5 kW Lodpfoz Ea Tpjx Af Sort Functionality tested Technical data available upon request.

Condition: reconditioned (used), Rotor: 264 mm Feed opening: approx. 510 x 815 mm Rotor length: approx. 510 mm Motor: 15 kW Knives: 24 Screen: 15 / 20 mm Lrodpfsz D Tzqjx Af Sot Technical data available upon request.

Condition: used, functionality: fully functional, machine/vehicle number: 500-8866, overall weight: 15,000 kg, rotor diameter: 600 mm, number of blades: 63, total length: 3,600 mm, total height: 2,470 mm, total width: 3,020 mm, rotor length: 1,500 mm, rotor width: 1,500 mm, type of input current: three-phase, rotational speed (max.): 68 rpm, input voltage: 400 V, WEIMA single-shaft slow-speed shredder – industrial, 1500 mm rotor, 1500 × 1835 mm opening For sale: used, single-shaft slow-speed shredder from the renowned WEIMA brand, designed for shredding a wide range of industrial waste – including hard plastics, film, big bags, wooden components, and furniture panels. This industrial-class machine, with its large rotor and wide inlet, guarantees high performance and the ability to process large-sized materials. 🔧 Technical specifications: Number of rotor knives: 63 Feed opening: 1500 × 1835 mm Rotor: length 1500 mm, diameter 600 mm, rotational speed 68 rpm Rotor type: reinforced V-rotor, screw-in knife holders Pressing system: pendulum type Hydraulic and electrical system: in working order 📦 Additional equipment: New, unused screens: 2 pieces (thickness 10 mm, size 708 × 1225 mm, mesh size Ø 40 mm) Set of mounting blocks + lower mounting strip for screens ⚠️ Condition: Used machine Lodpfxez D Sz No Af Sert Rotor and knives need to be replaced or refurbished All other components are in working order

Condition: good (used), Year of construction: 1994, large shredder, ideal for pallets or waste wood rotor width 1200 mm Lrjdpfoz D Sk Rox Af Sst motor 30 kW with hydraulic pusher

Condition: excellent (used), Catalog number: 8108 TECHNICAL DATA Lrsdpfx Aez A Egpjf Set - dimensions of the loading hopper (length/width) at the top: 6100x780mm - working width of the rotor: 430mm - main motor: 18.5kW - number of knives: 4 pcs - screen diameter: 17mm - outlet diameter: 250mm - dimensions (length/width/height): 1800x850x1480mm - weight: 1080kg ADVANTAGES – Made in Germany – Very good condition – Used shredder Net price: 24,900 PLN Net price: 5,929 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to fluctuations in exchange rates)

Condition: new, Year of construction: 2025, Screens for four-shaft shredders Models: RS, ZM, ZMK, GZ Lredpfxexn Name Af Set Type: SB-450, SB-760, SB-960, SB-1030, SB-1230 Year: 2025 New / Ready for Operation We are a manufacturer of replacement blades and spare parts for crushers and shredders. Please provide the manufacturer's name and machine type when inquiring.

Condition: used, functionality: fully functional, In this listing, you are purchasing a second-hand “Canon imageFORMULA DR-G2140” document scanner Item for sale: 1x Canon imageFORMULA DR-G2140 with the following features: Includes duplex scanner Meter readings: Total: approx. 3,125,070 Condition: This listing is for a second-hand device, which may show signs of wear (minor scratches or yellowing). The device has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the device during our opening hours. Please arrange an appointment to do so! Sturdy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly. Lsdpfez Az Sbjx Af Sort

Condition: used, functionality: fully functional, Year of construction: 2005, wheelbase: 8 mm, overall weight: 800 kg, empty load weight: 800 kg, operation weight: 800 kg, first registration: 12/2005, next inspection (TÜV): 12/2026, mobility: mobile, Equipment: front power take-off, lighting, Plastic shredder Lodjz D I U Sspfx Af Sjrt

Year of construction: 2020, condition: used, Product: Sylysia 350, Gasil 23 D, Precarb 800, Calcilit, Benzophenone (partially lumpy), Lo-Vel 8100, Syloid 7000, bulk density: 0.08-0.73kg/l, particle size: powder, product temperature: 5-30°C, moisture: dry, consistency: free-flowing, non-sticky and non-agglomerated, system capacity: according to customer-provided container handling, operating mode: 3-shift operation, installation location: indoors/heated, ambient temperature: 5-30°C, power supply: 400V, 3Ph,N, 50Hz, control voltage: 24VDC, compressed air supply: 4-6bar, oil-free, max. surface temperature: 200°C, with documentation. An on-site inspection is possible, not connected to power. Lredpfx Asz D Hzqjf Set

Condition: used, Year of construction: 2018, operating hours: 7,293 h, total height: 9,500 mm, total length: 34,500 mm, total width: 14,550 mm, Production year: 2018 Lsdpfx Ajzmul Eof Ssrt Model: 10HM Drake Number of operating hours: 7293 h Minimum space requirements: 34500mm x 14550mm x 9500mm Electric motor power (Siemens): 550 kW Working shaft width: 1000 mm Configuration: 10 hammers, 3-2-3-2 arrangement (weight per hammer: 105-117 kg) Capacity: 14 tons/hour Magnetic separator (steel) – 2 units Eddy current separator (non-ferrous metals) Drum screen Spare parts: Flap, 3 sets of hammers, pins, conveyor belts, sensors, 6 screens, gearboxes If you have any questions or require further information, please send a message or contact us by phone.

Condition: excellent (used), functionality: fully functional, engine power 18.5 kW feed hopper press drawer 2 cm screen year 2011 Lodpfoz D Acqjx Af Sort 380 V

Condition: excellent (used), overall weight: 277 kg, total width: 650 mm, total length: 1,940 mm, total height: 1,050 mm, input voltage: 220 V, Plockmatic Production Booklet Maker (PBM) 350, including the (SquareFold) BookFold Module and Trimmer Module. This booklet maker is in very good condition! The machine can be used offline, as shown in the photo, or connected to a machine from the Ricoh Pro 8100/8200, C7100/C7200, or C9100/C9200 series. Counter readings: PBM 350: 187,000 BookFold Module: 176,000 Trimmer Module: 207,000 Produces professionally finished booklets, both inline and offline, with stapling and folding. Lodpfoz Atuqsx Af Sort Capacity: up to 35 sheets of paper (80 g/m²) for folded booklets of approximately 140 pages. Supported paper sizes: width of approximately 206 mm to 320 mm, length up to approximately 457 mm. Suitable for A and B formats and various custom sizes. Are you looking for other options for this machine? We are flexible and can customize the machine to your requirements! This machine has been inspected and thoroughly tested by our own specialized technical service department. Would you like more information? Please feel free to contact us. Worldwide shipping is possible.

Condition: excellent (used), functionality: fully functional, overall weight: 277 kg, total width: 650 mm, total length: 1,940 mm, total height: 1,050 mm, input voltage: 220 V, Plockmatic Production Booklet Maker (PBM) 350, including the (SquareFold) BookFold Module and Trimmer Module. This booklet maker is in very good condition! The machine can be used offline, as shown in the photo, or connected to a machine from the Ricoh Pro 8100/8200, C7100/C7200, or C9100/C9200 series. Counter readings: PBM 350: 225,000 BookFold Module: 148,000 Trimmer Module: 237,000 Produces professionally finished booklets, both in-line and offline, with stapling and folding. Capacity: up to 35 sheets of paper (80 g/m²) for folded booklets of approximately 140 pages. Supported paper sizes: width of approximately 206 mm to 320 mm, length up to approximately 457 mm. Suitable for A and B formats and various custom formats. Are you looking for other options for this machine? We are flexible and can customize the machine to your requirements! This machine has been inspected and thoroughly tested by our own specialized technical service department. Would you like more information? Please feel free to contact us. Ljdpfx Afoz Attaj Sjrt Worldwide shipping is possible.

Condition: excellent (used), CATALOGUE NUMBER 8040 TECHNICAL DATA Lsdszul Dhspfx Af Ssrt - dimensions of the loading hopper (top, length/width): 850x1180mm - rotor width: 350mm - engine: 22kW - screen size: 12mm - number of knives: 6 pcs - dimensions (length/width/height): 1260x1200x1890mm - weight: 980kg ADVANTAGES – German-made – very good condition – used shredder Net price: 25900 PLN Net price: 6167 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to fluctuations in the exchange rate)

Condition: excellent (used), CATALOGUE NUMBER 7611 Technical specifications: - inlet dimensions: 460x180mm - outlet diameter: 300mm - roller width: 550mm - roller diameter: 350mm - number of blades: 10 pcs - blades arranged in 2 rows - automatic reversing - blade setting device - screen diameter: 30mm - top and bottom conveyor belt - lower drive roller - length of the feed conveyor belt: 4400mm - main motor: 37kW Ljdpfx Ajzruibsf Ssrt - top feed motor: 1.5kW - bottom feed motor: 2.2kW - dimensions (L/W/H): 6100x1150x1000mm - weight: approximately 3500kg ADVANTAGES - Made in Germany - Automatic reversing - Top and bottom conveyor belt - Blade setting device - Very good condition - Used shredder Net price: 98,900 PLN Net price: 23,000 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (the price may be subject to change in the event of significant exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7032 TECHNICAL SPECIFICATIONS - loading chute inlet: 1050x610mm - shredded wood outlet: Ø160mm - rotor working width: 580mm Ledpfxsztq Rws Af Ssrt - main motor: 18.5kW - pump motor: 0.75kW - number of knives: 14 pcs - knife dimensions: 30x30mm - screen: 15mm x 20mm - pressure drawer - electric autoreverse - dimensions (L/W/H): 2000x1130x1530mm - weight: 970kg ADVANTAGES – German-made – autoreverse – pressure drawer – very good condition – used chipper Net price: PLN 47,900 Net price: EUR 11,400 Net price converted at exchange rate 4.2 PLN/EUR (in case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOGUE NUMBER: 6943 TECHNICAL DATA - Loading hopper inlet: 1600x1500mm - Rotor working width: 1500mm - Main engine: 45kW - Pump engine: 5.5kW - Number of knives: 44 pcs - Knife dimensions: 50x50mm - Screen size: 59mm - Pressing drawer - Auto-reverse - Dimensions (L/W/H): 3430x2800x2850mm - Weight: approximately 9000kg ADVANTAGES - Made in France - New knives installed - Auto-reverse - Pressing drawer - Very good condition - Used shredder Lsdszrna Hopfx Af Sort Net price: 129,900 PLN Net price: 30,209 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (price may change in case of significant exchange rate fluctuations)

Condition: excellent (used), CATALOG NO. 7191 TECHNICAL DATA - loading hopper inlet: 870x735mm Ledpfx Aszru Uqsf Sjrt - rotor working width: 720mm - main motor: 18.5kW - pump motor: approx. 0.75kW - number of knives: 17 pcs - knife size: 80x40mm - screen: 20mm - pressing drawer - electric auto-reverse - outlet for shredded wood: Ø250mm - dimensions (L/W/H): 2000x1350x1370mm - weight: 1586kg ADVANTAGES – pressing drawer – very good condition – used chipper Net price: 33,900 PLN Net price: 8,070 EUR based on an exchange rate of 4.2 EUR (Prices may vary with larger fluctuations)

Condition: excellent (used), CATALOG NUMBER 7026 TECHNICAL DATA - inlet width 740mm - inlet height 300mm - roller width 780mm - roller diameter 1000mm - blade length 780mm - number of blades 2 pcs - screen dimensions 55x55mm - 4 geared pull rollers at the bottom - lower roller motor 5.5kW - 3 geared pull rollers at the top - upper roller motor 5.5kW - belt conveyor - belt conveyor length 4300mm - belt conveyor width 600mm - belt feed motor 2.2kW - main motor 90kW Lrsdpfx Afszrmw Dj Sst - reverse gear - auto-reverse - overall machine dimensions (L/W/H) 4600x2350x1700mm - overall feeder dimensions (L/W/H) 4550x980x970mm - total weight approximately 11000kg – manufactured in Germany, - auto-reverse (with adjustable settings) – used shredder, very good condition Net price: 231900 PLN Net price: 53930 EUR Net price calculated based on an exchange rate of 4.3 PLN/EUR (price may change in case of significant exchange rate fluctuations)

Condition: excellent (used), functionality: fully functional, overall weight: 12,000 kg, Untha RS 100-150 kW. Engines: 2 x 75 kW. The machine has undergone a complete overhaul. New blades, bearings, seals, and electrical controls. Fully functional. Ljdez Dw Syspfx Af Ssrt Equipment: Perforated screen. Electrical cabinet. Base frame. More technical information and price available upon request.