Used Grp Barrel for sale (376)

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-Drum Crusher AUTO is ideal for compacting 30 to 220 Ltr drums / barrels, but also plastic and cardboard drums can be easily reduced to their minimum of volume. In many cases this compacted material can then even be marketed again. The drum press impresses with its ease of use, safe operation and high throughput quality. By crushing these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 24 Ton Machine size: 2587 H x 1190 W x 1000 D mm Machine weight: 690 kg Transport height: 1800 mm Compaction rate: 8:1 Cycle times: 40 seconds Motor: 11 kW 32 Amp Power supply: 380 - 400 V (3 phase) Noise level: 68 dB AUTO compaction cycles Compaction head with spikes to punch the drum to drain out any residual liquids Maximum safety standards by totally enclosed chamber 30 Ltr. collection tray with tap connection Useable for 30 to 220 Ltr. steel drums, plastic drums and cardboard drums A quality product “Made in Europe” Hsdpfxoc Spguj Af Sou Suitable for compacting Steel drums Plastic drums Cardboard drums Fiber and paper drums Optional extras Machine colour RAL Can and filter crush insert Multi head to compact inside a 200 Ltr steel drum Drum Crusher, Drum Press, Drum Compactor, Barrel Crusher, Barrel Press, Barrel Compactor

Condition: used, Year of construction: 2016, functionality: fully functional, Timber sawing line with horizontal band saw and timber outfeed mechanisation, including control cabinets and hydraulic unit. The roller conveyors are each 11 metres long. The mobile band saw is set up stationary and axles, wheels, tow bar and mudguards are present. Comes with 12 associated saw blades. Available from mid-April/May Mobile saw Wimmer Zenz BN110, year of manufacture 2016, equipped as follows: Manufacturer: ZENZ Type: MOBILE SAW (MOBILSÄGE) Model: BN 110 Equipment: Clearance: 110 x 130 cm Cutting width: 95 cm Cast iron wheels, 850 mm diameter Band saw blade width: 100 mm Drive motor: 22 kW Length: 11 m with drawbar Width 2.55 m, height 2.70 m Weight: 3,500 kg Vertical support: 5.00 Log turner: 1.00 Level adjustment with claws: 4.00 Log roller: 2.00 Pre-cutter: 1.00 Official operational permit for overrun brake: 1.00 SPS control Band saw blade 6000x100x1.1 mm stellite Water cooling with 20 l barrel 20 l barrel and nozzle mounted on the blade guide Chain turner: 2.00 Hodoypat Ijpfx Af Sou Extension 3 m without support beam Chip collection box

Condition: excellent (used), Used stainless steel barrel Last use: Pharmaceuticals Item number: 10747 Volume: 50 liters Type: Vertical Material (wetted parts): 14301 / AISI 304 Design: Single-walled Operating pressure according to type plate: 0.5 bar Tank dimensions: Outer diameter: 350mm Overall width: 350mm Total length: 350mm Cylindrical height: 380mm Opening: 200mm Total height: 780mm Materials: Interior: 14301 / AISI 304 External parts: 14301 / AISI 304 Hjdpfx Asrdv R Aef Sou Equipment: Nameplate: no Side handles Gasket 2 x sight glasses 3 x nozzles

Condition: used, Year of construction: 2006, Demag Modular 250/560-1450 Euromap size: 2500-1450 CLAMPING UNIT Clamping force: 2500 kN Locking force: 2750 kN Max. opening stroke: 575 mm Min. mould height: 310 mm Max. mould height: 660 mm (760 mm with WA) Max. distance between platens: 1235 mm (1335 mm with WA) Platen size (H x V): 830 x 830 mm Distance between tie bars (H x V): 560 x 560 mm Max. mould weight: 2500 kg Max. mould weight on moving platen: 1700 kg HYDRAULIC EJECTOR Ejector stroke: 180 mm Ejector force: 69 kN Ejector retraction force: 31 kN INJECTION UNIT (1450) Screw diameter: 70 mm L/D ratio: 20 Injection pressure: 1400 bar Stroke volume: 1039 cm³ Shot weight (PS): 940 g Max. dosing stroke: 270 mm Max. nozzle stroke: 400 mm Nozzle penetration depth: 20 mm Nozzle contact force: 110 kN Barrel heating power: 27.0 kW Electric screw drive (WA): 30 kW Hopper capacity: 110 l GENERAL Oil tank capacity: 500 l Hjdpfx Ajz D Tnqjf Seu Pump motor: 30 / 37 kW Total installed power: 57 kW (64 kW with electric screw drive) Dry cycle time (EUROMAP 6): 2.35 s – 392 mm / 2.25 s – 392 mm Net weight (without oil): 11200 kg Dimensions (L x W x H): 5.7 x 1.7 x 2.2 m (length without injection unit overhang) Noise level: 74 dB(A)

Condition: excellent (used), Year of construction: 2016, Clamping force (kN): 1600 Opening stroke (mm): 460 Mould height (min–max) (mm): 250 – 600 Platen size (mm): 760 × 760 Tie bar distance (mm): 520 × 520 Ejector stroke / force (mm / kN): 150 / 40 Dry cycle time (sec): 1.4 – 320 Injection unit 1: Screw diameter (mm): 30 Screw stroke (mm): 160 Hedpfoyyz Ddsx Af Ssu Shot volume (cm³): 113 Screw speed (rpm): 420 L/D ratio (3 zones): 23.6 / 20.0 Plasticizing capacity (g/sec): 15 / 22 L/D ratio (barrel): -29 Plasticizing capacity (barrel) (g/sec): -29 Injection flow (cm³/sec): 157 / 214 Injection pressure (bar): 2400 / 2000 Nozzle stroke / force (mm / kN): 225 / 28 Injection unit 2: 30 mm Drive / Power Pump motor power (kW): 16.91 Working hours 13.227 h Type: Multicomponent Drive: Electric Possible to buy with Viper robot

Condition: used, functionality: fully functional, machine/vehicle number: 651 (4531040), Year of construction: 2008, For sale is a Palfinger work platform made of GRP (manufacturer: GFK‑Technik, M. Langer), ideal for maintenance, assembly, and service work, especially in electrical environments. The platform offers insulation protection up to 1,000 V and is therefore suitable for work near electrical installations. Note: The Z 147 platform exchange system is required for use. Only for vehicles > 7.5 tons. Features & Advantages Material: GRP (glass fiber reinforced plastic) – corrosion-resistant, lightweight, durable Access: Folding ladder with safety handrail for safe entry Optional equipment: Aluminum tool tray (700 x 100 x 90 mm) Technical Data Manufacturer: GFK‑Technik, M. Langer (Palfinger) Manufacturer's part number: 651 (4531040) Hedpfozhkwgsx Af Sou Year of manufacture: 2008 Dimensions (L x W x H): approx. 1,630 x 900 x 1,100 mm Load capacity: 300 kg Insulation protection: up to 1,000 V Required system: Platform exchange system Z 147 Access: Folding ladder with safety handrail Condition Used, well-maintained, functional. Inspection possible by arrangement.

Condition: like new (used), set, packed in wooden box, screw and barrel for 150 mm extruder, Hjdpfxedm Agho Af Sju grooved feeding bush, screw with shearing and mixing element

Year of construction: 2017, condition: ready for operation (used), Clamping force: 1800kN, max. opening stroke: 750mm, min. mold installation height: 300mm, screw diameter: 40mm, L/D: 20, G4 S10, clear tie-bar spacing: tie-barless, max. stroke volume: 220cm³, injection rate: 223cm³/s, max. injection pressure: 1930bar, material barrel: M9 (bimetallic barrel), length: 6455mm, height: 2100mm, weight without mold: 13.7t, operating hours: 59,947h, with documentation. Available from December 2026, an on-site inspection is possible. Hedpfjztzqzex Af Sou

Condition: used, maximum load weight: 7,750 kg, overall weight: 11,900 kg, axle configuration: 2 axles, first registration: 06/2005, next inspection (TÜV): 07/2025, loading space length: 8,200 mm, loading space width: 2,490 mm, loading space height: 3,000 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2005, Equipment: ABS, According to our "General Terms and Conditions of Business" (as interpreted) and without any guarantee or warranty, we can offer you the following vehicle today, subject to prior sale, errors, and typographical mistakes, with the offer being non-binding until closure: Ackermann Tandem Trailer with Lifting Roof ( Vehicle 94 ) First registration: 14.06.2005 Permissible total weight: 11,900 kg Unladen weight: 4,150 kg Payload: 7,750 kg Hjdpfjzttv Njx Af Ssu Overall length: 9,800 mm Overall width: 2,550 mm Overall height: 4,000 mm Internal length: 8,200 mm Internal height: 3,000 mm 20 pallet spaces Lifting roof Curtainsider both sides Edscha sliding roof system Portal rear doors (split 1/2 and 1/2) Manual rear support legs GRP axles with drum brakes Tyres: 235/75R17.5 approx. 40% Support leg with crank handle Plastic toolbox front left (driver's side) Spare wheel carrier Air suspension with raise & lower function Price: € 3,850.00 (net) All details are provided without guarantee or warranty. Our General Terms and Conditions of Business apply. For disputes up to a value of € 50,000.00, the place of jurisdiction for both parties is the Local Court of Ludwigslust; for higher amounts in dispute, it is the Regional Court of Schwerin. Subject to prior sale, errors, and typographical mistakes.

Year of construction: 2009, condition: used, Used Baker Perkins model MP24PH 40:1 L/D twin screw extruder. - Manufacturer: Baker Perkins - Model: MP24PH 40:1 L/D - Number of screw: Twin Screw Extruder - Rotations: co-rotating - Screw speed range: 0 - 600 rpm - Motor power: 11.2.5 kW, variable speed Barrel: - Maximum operationg temperature: 200°C - Nominal barrel lenght: 40:1 L/D - Barrel type: one piece horizontally split clamshell barrel - Heating: electrically heated via cartrige type heaters Hjdpfjzvn Daox Af Sju - Cooling: water-cooled via cored barrel backing block Includes: - Touch HMI integrated in switchboard - Single screw powder feeder - Liquid feed system - liquid hopper, gear pump and flow meter

Year of construction: 2002, condition: good (used), functionality: fully functional, An ultra reliable 130 / 160mm OMP Prealpina plastics extruder, supplied by ourselves back in 2002. I have know the extruder history since new as i was the supplying agent originally. Originally supplied to reprocess confectionery Polypropylene films with 100% heavy print on the film , it performed very well in degassing and compounding the plastics materials till that contract expired. The extruder is a cascade version , allowing significant extra gas venting and polymer mixing, by utilizing a second short barrel 160mm extruder to deliver molten and clean plastic to a die face cutter, followed by a centrifuge to dry the pellet. The line has recently been fitted with an ultra efficient FIMIC fully automatic screen filter, providing probably the most efficient filtration available to plastics recyclers. being a cascade configuration , with superior filtration and venting , the line is most suitable for difficult plastics films or fibre recycling. The line has a 7 cu metre silo feeding directly into a force feed conical delivery system to the feed zone of the 130mm extruder. There is a master batch/ additive feeder included. The line was sold to a company in Lituania from its earlier owner in the UK in 2022 , but the plastic feedstock thought to be available in Lithuania never materialised. The line has been stored since, and is still dismantled and able to be shipped immediately to a new buyer. Hsdpfx Afjzwhtde Ssu

Condition: excellent (used), filter area: 50 m², suction capacity: 650 m³/h, negative pressure: 38,000 Pa, High-pressure fume extractor, dust extractor, TEKA self-cleaning filter. Filter for plasma, laser. Due to its design, the system is particularly recommended for processing greasy, sticky fumes and dust. The device is equipped with an automatic system for impregnating cartridge filters and an activated carbon filter for neutralizing odors generated during processing. The filter is cleaned pneumatically with impulses of compressed air during operation, which results in high efficiency of the device. The extraction is designed for special applications where the filtered fumes and dusts may be soggy and sticky. By feeding the impregnant, moisture is captured from the smoke, which helps protect the filters from sticking. In this case, the life of the patron filters is extended. After the cleaning process, the control gives a pulse to the magnetic valve, located on the top cover of the powder-filled barrel. The applied magnetic pulse swirls the impregnant, which enters the suction pipeline. The powder covers the working surface and provides a protective coating for the filters. Hsdpfx Afjrhidms Ssu Unit like new - worked only 126 hours !!! Turbine with a power of 7.5 Kw. in a sound-absorbing housing with a silencer Capacity 650 m3/h at a vacuum of up to 38 000 Pa !!! Filtration area of 50m2 Inlet diameter : 100 mm Complete with , pneumatic gate valve , silencer and partial piping.

Condition: used, Year of construction: 2006, CLAMPING UNIT Clamping force: 800 kN Locking force: 800 kN Distance between tie bars: 420 x 420 mm Max. opening stroke: 450 mm Min. mould height: 250 mm (200 / 175 mm with ZE 214) Max. distance between platens: 700 mm (750 / 800 mm with WA 211) Platen size (H x V): 590 x 600 mm Max. mould weight: 700 kg Max. mould weight on moving platen: 450 kg HYDRAULIC EJECTOR Ejector stroke: 150 mm Ejector force: 41.2 kN Ejector retraction force: 14.8 kN INJECTION UNIT (120) Screw diameter: 22 mm L/D ratio: 20 Injection pressure: 2591 bar Stroke volume: 41.8 cm³ Shot weight (PS): 37 g Max. dosing stroke: 110 mm Max. nozzle stroke: 200 mm Nozzle penetration depth: 40 mm Nozzle contact force: 60 kN Hodez D U Skspfx Af Sou Barrel heating power: 5.1 kW Hopper capacity: 35 l GENERAL Oil tank capacity: 140 l Pump motor: 5.5 / 7.5 kW Total installed power: 10.6 / 12.6 kW Dry cycle time (EUROMAP 6a): 2.01 s – 196 mm / 1.82 s – 196 mm Net weight (without oil): 2550 kg (2650 kg with full cladding) Dimensions (L x W x H): 3.4 x 1.2 x 2.0 m (3.6 x 1.2 x 2.0 m with full cladding) Noise level (idle / full load): 56 / 71 dB(A)

Condition: good (used), Year of construction: 2004, operating hours: 63,000 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 35 mm, Type: Engel Victory 500/120 Phoenix Year: 2004 Screw ø: 35 & 40 mm (Extra screw & barrel from 2021) Shot volume ccm: 193 & 251 Operating hours: approx. 63,000 h Hedpfxeymn Ins Af Seu Complete line: – Robot: Wemo 8-5 3S, Year 2003 – Conveyor belt, Crizaf – Color doser, Moretto – 2 pcs. temperature control units, Regloplas – Extra screw & barrel

Year of construction: 2024, operating hours: 100 h, condition: refurbished (used), functionality: fully functional, overall weight: 500 kg, input voltage: 230 V, operating pressure: 6 bar, type of input current: AC, machine/vehicle number: 2K.MA.WPE.241, Used Mur.Tech KMD-3000 V1 2-component mixing and dispensing system (year of manufacture 2024), directly from the manufacturer. Designed for highly viscous, abrasive, and reactive media such as epoxy resins, polyurethanes, silicones, adhesives, and highly filled encapsulating compounds. Pulsation-free material transfer thanks to an eccentric screw pump. Before delivery, we, as the original manufacturer, carry out a complete factory reconditioning of all components in contact with the material: the pump, material containers, mixing head, hoses, and valves are either rebuilt or replaced with new ones. This means that the wear condition of the media-carrying parts corresponds to that of a new system. Frame and sheet metal parts show signs of use. Highlights: - Factory reconditioning of all components in contact with the material before delivery - Modular design: the entire conveying path from the pump head to the mixing gun can be replaced without tools (clamp technology) - Material change in just a few minutes – virtually no material loss - Stator change with only 3 screws – service without production downtime - Mixing tube change without tools in seconds - Lightweight and ergonomic mixing head made of carbon / aluminum / GRP - Swivel arm for fatigue-free operation - Mobile thanks to roller chassis Technical data: Manufacturer: Mur.Tech GmbH, Made in Austria Model: KMD-3000 V1, year of manufacture 2024 Pump: Eccentric screw, pulsation-free Mixing ratio: 100:10 – 100:100, infinitely variable Stator materials selectable: NBR, FKM, EPDM, silicone, etc. Material containers: 2x 30l, with pneumatic propeller stirrer Mixer: Static or dynamic possible Operation: Gun or touch HMI Control: B&R PLC with B&R touch panel Sensors: - Pressure monitoring in the container - Temperature measurement along the entire material path - Blockage monitoring - Flow measurement and bubble detection Discharge types: continuous, pulsed, by weight Connection: 230V 50Hz, compressed air min. 6 bar Dimensions (W × D × H): 2,000 × 1,000 × 1,550 mm Note on the images: The images show the system in its current condition before factory reconditioning. The components in contact with the material will be renewed before delivery. Hodpfozabnzsx Af Ssu Application areas: Adhesive dispensing, electrical potting, specialty chemicals, series production, medical applications. Scope of supply: System, operating manual, wiring diagrams. Commissioning and training optional. From the manufacturer: Spare parts supply and service by the original team. Sold as seen, excluding any warranty. Price: on request Location: 8811 Scheifling On-site inspection possible by appointment.

Condition: used, Year of construction: 2003, CLAMPING UNIT Clamping force: 500 kN Locking force: 500 kN Distance between tie bars: 370 x 370 mm Max. opening stroke: 400 mm Min. mould height: 210 mm (160 / 135 mm with ZE 214) Max. distance between platens: 610 mm (660 / 710 mm with WA 211) Platen size (H x V): 540 x 530 mm Max. mould weight: 580 kg Max. mould weight on moving platen: 380 kg Hjdpfx Afjz D U Ixj Seu HYDRAULIC EJECTOR Ejector stroke: 125 mm Ejector force: 41.2 kN Ejector retraction force: 14.8 kN INJECTION UNIT (200) Screw diameter: 30 mm L/D ratio: 20 Injection pressure: 1900 bar Stroke volume: 106.0 cm³ Shot weight (PS): 94 g Max. dosing stroke: 150 mm Barrel heating power: 8.3 kW Hopper capacity: 20 l INJECTION UNIT – HORIZONTAL Max. nozzle stroke: 361 mm Nozzle penetration depth: 40 mm Nozzle contact force: 60 kN INJECTION UNIT – VERTICAL (parting line injection) A min / A max: 100 / 300 mm B min / B max: 100 / 468.5 mm Max. nozzle stroke: 368.5 mm Nozzle contact force: 15 kN GENERAL Oil tank capacity: 180 l Pump motor: 18.5 kW Total installed power: 26.8 kW Dry cycle time (EUROMAP 6a): 1.80 s – 224 mm / 1.80 s – 259 mm Net weight (without oil): 3400 kg Dimensions horizontal (L x W x H): 3.9 x 1.2 x 2.0 m Dimensions vertical (L x W x H): 3.9 x 1.2 x 3.4 m Noise level (idle / full load): 56 / 71 dB(A)

Condition: excellent (used), Year of construction: 2011, Machine: ENGEL DUO 5550/650 pico Control unit: CC200 Year of manufacture: 2011 Operating hours: 61,606 h Robot: Viper 40 1. Clamping Unit Clamping force: 6,500 kN Clearance between tie bars (H × V): 1,100 × 960 mm Platen dimensions (H × V): 1,510 × 1,440 mm Mould height (min./max.): 650 / 1,150 mm Mould opening stroke: 1,400 mm Maximum platen distance: 2,050 mm Maximum mould weight: 11,000 kg Ejector force: 95 kN Ejector stroke: 250 mm Tie bar diameter: 175 mm 2. Injection Unit (Aggregate 5550) Hsdpfjyw Aa Uox Af Ssu Screw diameter: 90 mm (reinforced for up to 30% fiber content) Maximum injection volume: 2,740 cm³ Maximum shot weight (PS): 2,520 g Injection pressure (max./boost): 2,180 bar Injection pressure (standard): 1,910 bar Screw L/D ratio: 20 Screw stroke: 430 mm Maximum screw speed: 148 rpm Plasticising rate: 77 g/s Nozzle contact force: 150 kN 3. Drive and Power Supply Installed drive power: 90 kW Barrel heaters power: 56 kW Number of heating zones: 6 Hydraulic oil tank capacity: 1,000 l 4. Special Equipment and Hydraulics Core pull circuits: - 6 hydraulic circuits on the moving platen - 2 hydraulic circuits on the fixed platen Cascade valves: 4 units (installed on the fixed platen) 5. General Description Two-platen machine (DUO series) designed for large-scale plastic part production. The design ensures: - High rigidity of the clamping system - Capability for operation with heavy moulds and large opening strokes Additional information: - Screw reinforced for operation with up to 30% fiber content - All hydraulic hoses replaced in Q4 2024 - Machine condition: excellent, ready for production Availability: Immediately available, professionally maintained, and ready for instant operation.

Condition: good (used), Year of construction: 2001, Demag Ergotech 250/560-840 Euromap size: 2500-840 CLAMPING UNIT Clamping force: 2500 kN Locking force: 2750 kN Max. opening stroke: 575 mm Min. mould height: 310 mm Max. mould height: 660 mm (760 mm with WA) Max. distance between platens: 1235 mm (1335 mm with WA) Platen size (H x V): 830 x 830 mm Distance between tie bars (H x V): 560 x 560 mm Max. mould weight: 2500 kg Max. mould weight on moving platen: 1700 kg HYDRAULIC EJECTOR Ejector stroke: 180 mm Ejector force: 69 kN Ejector retraction force: 31 kN INJECTION UNIT (840) Screw diameter: 45 mm L/D ratio: 20 Hedpfx Ajz D Ttgsf Sou Injection pressure: 2402 bar Stroke volume: 358 cm³ Shot weight (PS): 320 g Max. dosing stroke: 225 mm Max. nozzle stroke: 400 mm Nozzle penetration depth: 20 mm Nozzle contact force: 80 kN Barrel heating power: 13.0 kW Electric screw drive (WA): 20.5 kW Hopper capacity: 70 l GENERAL Oil tank capacity: 500 l Pump motor: 30 / 37 kW Total installed power: 43 kW (50 kW with electric screw drive) Dry cycle time (EUROMAP 6): System: 2.35 s – 392 mm / 2.25 s – 392 mm; Concept: 2.25 s – 392 mm / 2.25 s – 392 mm Net weight (without oil): 10700 kg Dimensions (L x W x H): 5.7 x 1.7 x 2.1 m (length without injection unit overhang) Noise level: 74 dB(A)

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 5,440 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 840D sl, spindle speed (max.): 60,000 rpm, spindle motor power: 15,000 W, number of slots in tool magazine: 12, number of axes: 5, This 5-axis Hamuel Reichenbacher ECO-NT was manufactured in 2011. It features a working envelope of 4,845 mm and 5,440 mm in the X-axis, 1,630 mm in the Y-axis, and 1,000 mm in the Z-axis. The machine is equipped with a powerful spindle speed of up to 60,000 rpm and a versatile tool changer with 12 positions. If you are looking to get high-quality milling capabilities, consider the Hamuel Reichenbacher ECO-NT vertical machining centre we have for sale. Contact us for further details. Hjdpfx Aozu Rnfef Seu • Unit Configuration: 5-axis milling units with cardan or fork-mounted spindle • Reckert Spindle Power: 4.6 kW - 15 kW • Reckert Spindle Speed: 0 - 60,000 rpm • Reckert Tool Holder: HSK F25 - F63 • Omlat Spindle Power: 3.5 kW - 7 kW • Omlat Spindle Speed: 0 - 45,000 rpm • Omlat Tool Holder: HSK F25 - F63 • Tool Changer: 12 position tool changer • Extraction & Chip Disposal: Room extraction nozzle for lubricant mist and dust, clamping device extraction • Machine Table Equipment: HPL table surface (smooth or grid), Aluminum table surface (smooth or grid), Steel strips with fitting and threaded bushes • Workpiece Clamping Technology: Vacuum clamps, Pneumatic clamps, Special clamping devices Additional Equipment: • Loading and unloading systems, Torque support for additional units, Air blow nozzles, Air ionisation, Minimal quantity lubrication, Tool breakage control, Tool recognition system, Camera system, Laser projector Supported Materials: • Wood, Aluminum, Steel, Inconel, Titanium, Plastic, Composite materials, GRP, Hybrid plastic/metal parts

Condition: excellent (used), Year of construction: 1999, operating hours: 1,437 h, functionality: fully functional, machine/vehicle number: 4204, pressure: 6 bar, total width: 1,700 mm, inner dimension width: 1,700 mm, workpiece weight (max.): 3,000 kg, turntable diameter: 1,400 mm, We offer this shot blasting machine manufactured by Carlo Banfi in 1999 and completely overhauled by METAL SERVICE s.r.l. in 2024. Rotating barrel machine with metal ribs Capacity: 3,000 kg Diameter: 1,400 mm Chamber width: 1,700 mm Magnetic separator Double turbine, each with a 30 kW electric motor and belt drive Complete with: Dust collection filter Loading hopper complete with guards Parts unloading conveyor belt Complete with CE certification, electrical diagrams, and operating and maintenance manual If you have any questions or require further information, please do not hesitate to send us a message or call us. Hsdpoznvtaofx Af Ssu

Year of construction: 2013, operating hours: 1,000 h, condition: ready for operation (used), This REIFENHÄUSER BI Trudes 115 was manufactured in 2013. Ideal for pipe extrusion, this machine represents a robust addition to any production line. Contact us for more information. Additional equipment • 2x electrical melt pressure transducer 1/2 “UNF diaphragm pressure transducer • 2x ground temperature sensor with sword probe Machine Benefits Qualitative Machine Benefits • 13x anchoring for one fixing point installation tool • Pair of worms, compact version, made of highly tempered steel and bimetal design • Counter-rotating twin-screw extruder, gearbox with integrated back pressure bearing for 350 bar • Recirculating oil lubrication with oil pressure and oil temperature monitoring • Barrel Ø 115-30 d with atmospheric and vacuum degassing openings • Heating and air cooling divided into 5 zones, total output of 56400 w • Vacuum unit for bt 115 including 2x vacuum unit and vacuum suction unit • Complete screw temperature control including cassette installation • Mains supply with main switch and load disconnector for heating, drives, and auxiliary voltages Technical Machine Benefits • Stationary for an extrusion height of 1000 mm • Complete control cabinet with all necessary control and regulation equipment attached Hsdpfxox D Ewmj Af Ssu • Microprocessor-controlled multi-channel controller for two and three-point zones • Adaptive and self-optimizing control behavior • Fault messages with collective alarm and storage • Siemens mp377 touch panel for setpoint specification and actual value display • Recipe management of up to 20 recipes • Drive with one ac motor, vector-controlled • Digital drive controller for ac motors, with full digital technology • Motor temperature monitoring with pre-warning and shutdown Extra Information Machine still under power

Condition: used, Year of construction: 2001, CLAMPING UNIT Clamping force: 2000 kN Locking force: 2200 kN Max. opening stroke: 575 mm Min. mould height: 310 mm Max. mould height: 660 mm (760 mm with WA) Max. distance between platens: 1235 mm (1335 mm with WA) Platen size (H x V): 830 x 830 mm Distance between tie bars (H x V): 560 x 560 mm Max. mould weight: 2500 kg Max. mould weight on moving platen: 1700 kg HYDRAULIC EJECTOR Ejector stroke: 180 mm Ejector force: 80 kN Ejector retraction force: 35 kN NJECTION UNIT (120) Screw diameter: 30 mm L/D ratio: 20 Injection pressure: 2420 bar Stroke volume: 124 cm³ Shot weight (PS): 110 g Max. dosing stroke: 175 mm Max. nozzle stroke: 350 mm Hodpfxsz D Uv No Af Seu Nozzle penetration depth: 40 mm (30 mm with SPI) Nozzle contact force: 80 kN Barrel heating power: 7.9 kW Electric screw drive (WA): 12.6 kW Hopper capacity: 70 l GENERAL Oil tank capacity: 500 l Pump motor: 22 / 30 kW Total installed power: 30 kW (38 kW with electric screw drive) Dry cycles (EUROMAP 6a): 1830 / 1900 per hour Dry cycles without nozzle retraction: 2200 / 2300 per hour Net weight (without oil): 6200 kg Dimensions (L x W x H): 5.1 x 1.6 x 2.1 m (length without injection unit overhang) Noise level (idle / full load): 66 / 77 dB(A) Demag Ergotech 150-840 NC4 INJECTION UNIT (840) Screw diameter: 60 mm L/D ratio: 20 Injection pressure: 1351 bar Stroke volume: 636 cm³ Shot weight (PS): 570 g Max. dosing stroke: 225 mm Max. nozzle stroke: 400 mm Nozzle penetration depth: 40 mm (30 mm with SPI) Nozzle contact force: 80 kN Barrel heating power: 23.1 kW Electric screw drive (WA): 20.5 kW Hopper capacity: 70 l GENERAL Oil tank capacity: 500 l Pump motor: 22 / 30 kW Total installed power: 45 kW (53 kW with electric screw drive) Dry cycles (EUROMAP 6a): 1700 / 1870 per hour Dry cycles without nozzle retraction: 2000 / 2200 per hour Net weight (without oil): 7700 kg Dimensions (L x W x H): 5.4 x 1.6 x 2.1 m (length without injection unit overhang) Noise level (idle / full load): 66 / 77 dB(A)

Condition: good (used), Year of construction: 2017, 5-Axis CNC Machining Center MAKA DC 7 2 units of MAKA DC 7 for sale. High-performance CNC machining center for 5-axis machining of composite, GRP, and CFRP components, designed with a fixed portal structure. The machining unit is horizontal, and the table is arranged vertically. Machine type: MAKA DC7 Year of construction: 2017 Number of tables: 1 x rotary table for tandem operation Technical data: Travel distances: X-axis: approx. 3,900 mm Y-axis: approx. 1,300 mm Z-axis: approx. 900 mm A-axis: 270° C-axis: 540° Speed: X- / Y- / Z-axis: 60 m/min. A- / B-axis: 10,000°/min. Acceleration: X- / Y- / Z-axis: 3 m/sec² Cube dimensions (working area): X-axis: 2,000 mm Y-axis: 1,000 mm Z-axis: 500 mm Working area (cube dimensions) with a total tool length of 160 mm and a tool diameter of 160 mm. Table design: 1 x steel frame rotary table with dimensions: 1,000 x 2,000 mm. Max. table rotation time: 3 sec. Rotary table with center partition. While one side is being machined, the second side can be loaded or unloaded. 8 units of zero-point clamping systems, 4 units per table side, for quick fixture changes. Vacuum supply: 2 vacuum clamping circuits per table, with vacuum distribution unit, quick-release couplings on the table. 2 vacuum pumps, 1 per table, frequency-controlled, suction capacity approx. 100 m³/h, vacuum tank 250 liters, including frame. Universal head for 5-axis milling with a 90° head and tool change milling spindle C-axis (rotary axis) 540° (+/- 270°) A-axis (swivel axis) 270° (+/- 135°) Speed: 10,000°/min 1 milling spindle HSD Asynchronous motor, water-cooled for tool holder HSK-F63 max. power 12 kW (S1) / 15 kW (S6) max. speed 24,000 1/min Torque support with air supply for angle heads. 1 compressed air nozzle on the milling head, controllable via M-function. Tool changer: 1 carousel tool magazine with 12 positions, mounted on the side. 6 x positions: for tools up to 60 mm in diameter 5 x positions for angle heads and probing system 1 x position for saw blade up to Ø 350 mm. Control system: 1 machine control system Siemens SINUMERIK 840D SL User memory: CNC 3 MB Control panel with 15" display with graphic color LCD, foil keyboard, and mouse. Drives: Rack and pinion drives in the X and Y axes, ball screw drive in the Z axis, A/C axis with hollow shaft drive. Safety: 1 soundproof cabin, with maintenance door, including interior lighting. 1 automatic high-speed roller shutter door. Accessories: Chip guide plates inside the protective enclosure. Extraction system in the working area, to be connected to the extraction system. Hsdpfx Afezgtyhe Sou Receiver for 3D measuring probe. Tool breakage monitoring system. Both machines are assembled and ready for operation and can be inspected. An extraction system from Keller Absaugtechnik, including complete piping, is available. This extraction system was designed for 2 x MAKA DC 7 and is also for sale. We would be happy to prepare an offer for you!

Year of construction: 2014, condition: ready for operation (used), An ENGEL injection molding machine is offered. Clamping force: 1800kN, opening force: 96kN, max. opening stroke: 750mm, min. mold height: 300mm, max. platen distance: 1050mm, clear tie-bar spacing: tie-bar-less, mold mounting platens X/Y: 880mm/830mm, max. mold weight: 1500kg at center of gravity 230mm, ejector stroke: 180mm, ejector force forward/backward: 80kN/33kN, screw diameter: 55mm, metering stroke: 215mm, max. stroke volume: 510cm³, injection rate: 255cm³/s, max. injection pressure: 2050bar, nozzle stroke: 350mm, nozzle contact force: 67kN, injection unit heating capacity: 16.3kW, heating zones incl. nozzle: 5, barrel: M9 bimetallic barrel, integrated hot runner control zones: 24×220V, mold cooling circuits: 6×10l/min, hydraulic oil capacity: approx. 540l, operating hours: 67423h (as of 30.06.2026). The machine will be available from December. Machine dimensions X/Y/Z: approx. 6275mm/1888mm/2100mm, weight without mold: approx. 12200kg. Documentation available. An on-site inspection is possible. Hsdpfezt Slpox Af Sju

Condition: excellent (used), Year of construction: 2008, DEMAG Injection Moulding Machine System 1500/1500-16000 Basic Data Manufacturer: DEMAG Model: System 1500/1500-16000 Year of manufacture: 2008 Clamping Unit Clamping force: 15,000 kN Dimensions of mounting plates (H × V): 2150 × 1880 mm Clearance between tie bars (H × V): 1500 × 1250 mm Minimum mould height: 700 mm Maximum mould height: 1400 mm Maximum opening stroke: 2900 mm Injection Unit Screw diameter: 145 mm Injection volume: 10,981 cm³ Injection weight (PS): 9,880 g Maximum injection pressure: 1454 bar Electrical and Hydraulic Equipment Rated pump motor power: 165 kW Heater power: 97 kW Machine Dimensions and Weight Net machine weight: 74 t Control cabinet weight: 21 t Total weight: approx. 95 t Dimensions (L × W × H): 14.4 × 3.4 × 2.9 m Service History / Repairs 2010 – new screw with RSP and barrel 2015 – new IBED 2015 – new wiring board Hjdpfx Aoyugalsf Seu 2017 – new motor and pump no. 2 2017 – new injection cylinder rod BS with seals 2017 – replacement of oil cooler circulation pump 2017 – replacement of TeachBox (robot) 2018 – replacement of pumps P1 + P3 (at 65,800 h) 2018 – hydraulic oil change Optional ESS (Energy Saving Systems) The machine can be equipped with a modern ESS servo drive system, which significantly improves energy efficiency in hydraulic plastic injection moulding machines. The system controls the operation of the hydraulic pump motor through a frequency inverter, which adjusts the motor speed to the machine’s actual demand during the production cycle. As a result, electricity is consumed only when it is truly needed. Main Benefits - Up to 30% reduction in energy consumption - Servo drive technology for hydraulic pumps - Global quality and proven technology used in the plastics processing industry - Reduced energy loss during machine idle time - Lower heating of the hydraulic system - Extended service life for the motor and hydraulic components - Option for installation in existing hydraulic injection moulding machines The ESS system allows significant reduction of machine operating costs while maintaining full production performance parameters.