Used Floor Plates for sale (19,285)

Condition: used, Technical details: floor-plate length: 810 mm plate width: 690 mm plate height: 190 mm hole diameter: ca. 119 mm Nsdpfju N Diysx Ag Ielh weight of the machine ca.: 0,56 t transport dimensions LxWxH: 820 x 700 x 200 mm T-slots centric *

Condition: used, Technical details: floor-plate length: 470 mm plate width: 340 mm plate height: 120 mm weight of the machine approx.: 107 kg space requirements of the machine approx.: 470x340x120 m from a BAZ IMA NORTE VS 800 - clamping plates, without eyelets Njdpou N Dn Nsfx Ag Islh T-slots to DIN 650 - a = 14mm; h = 26mm; b = 24mm; c = 11mm T-slot centerstand = 125mm - side-slot left and right = width: 20mm *

Condition: used, Technical details: table length: 800 mm table width: 630 mm table height: 160 mm height over floor: ca. 810 (im Gestell) mm weight of the machine approx.: ca. 140 kg space requirements of the machine approx.: 0,8x0,65x0,82 m surface plate with squares 100x100mm - on a frame Nsdou Nkpaspfx Ag Iolh *

Condition: used, Technical details: Nljdpfx Aju Nkpyeg Ijh floor-plate length: 660 mm floor plate width: 450 mm floor plate height: 70 mm passage opening in table: Ø 115 mm weight of the machine approx.: 111 kg space requirements of the machine approx.: 660x450x70 mm fall trough hole 115mm T-slots : according to DIN 650 and 508 a=22mm b=38mm h=40mm c=17mm *

Condition: used, Technical details: floor-plate length: 2990 mm plate width: 1990 mm plate height: 190 mm Plate thickness: 190 mm weight of the machine ca.: ca. 7,0 / pro Platte t transport dimensions LxWxH: ca. 3,0 x 2,0 x 0,2 / pro Platte m There are 2 plates for sale. Material cast steel Surface milled/finished T-slots according to DIN 650: 8xT-slots large: a=36; h=70; b=55; c=25.5 mm Nljdpfx Aeval H Rjg Ieh 7xT-slots small: a=28; h=38; b=47; c=21 mm Center stand 123 mm 9x through holes Ø 80 mm 6x through holes Ø 33 mm *

Condition: used, Technical details: floor-plate length: 4900 mm plate width: 1460 mm plate height: 300 mm Plate thickness: 300 mm weight of the machine ca.: 5,3 / pro Platte t transport dimensions LxWxH: ca. 4,9 x 1,5 x 0,3 / pro Platte m Nedpfx Agjval Hqs Iolh There are two plate fields for sale. Material cast steel T-slots according to DIN 650: a=58; h=108; b=110; c=50 mm Center stand 295 mm 6x through holes Ø 40 mm 2 groove areas are broken out on the face of one panel. *

Condition: used, Technical details: Nsdpjval Iuefx Ag Ijlh floor-plate length: 3500 mm plate width: 1500 mm plate height: 345 mm weight of the machine ca.: 3,7 / pro Platte t transport dimensions LxWxH: ca. 3,5 x 1,5 x 0,35 / pro Platte m Es stehen 4 Aufspannplatten zum Verkauf. There are 4 clamping plates for sale. Manufacturer: MORA-Meuselwitzer Guss Material cast steel T-slot according to DIN 650: a=13.5; h=24; b=24.5; c=11mm one long side surface finely milled 2x plates are equipped with guide rails *

Condition: used, Technical details: sheet width: 1500 mm plate thickness: 2,25 mm distance between columns: 1600 mm back gauge: nein cutting angle: nicht bekannt ° cutting gap adjustment: nein mm down holder: über Druckleiste Stück height over floor: 850 mm Table dimensions: LXB 1800 x 350 mm weight of the machine ca.: 0,85 t dimensions of machine: 2,0 x 0,8 x 1,3 m simple mechanical guillotine shear Nljdpfx Aou Icn Ejg Ieh with shelf right/left 305 x 100mm operation via ON/OFF *

Condition: new, axle configuration: 3 axles, loading space length: 13,510 mm, loading space width: 24,500 mm, suspension: air, tire size: 385/65-22,5, color: black, Equipment: ABS, = Additional Options and Accessories = - EBS - LED lighting - Air suspension - Disc brakes - Toolbox = Notes = Internal number for customer inquiries: 5-143 Immediately Available!!! PAVIC semi-trailer, timber transport platform with hardwood floor, 43 t technical permissible total weight, 13,500 mm loading length. Equipped with a quick-change pocket system. Only the stake is pulled out; the technology is housed in the pocket. Your advantage: standard stake with low weight at a reasonable price. IMMEDIATELY AVAILABLE! * Chassis length approx. 13510 mm (head frame to head frame) * Chassis width approx. 2540 mm (outer frame to outer frame) * Unladen ride height approx. 1400 mm at a saddle height of 1200 mm * Saddle load max. approx. 16000 kg * Front overhang (kingpin to front edge of kingpin plate) 1550 mm * Kingpin 2" according to SAE standard, replaceable from below * E-wheel holder for 1 E-wheel * Front wall approx. 2500 mm high, corners angled with sheet metal cladding * Steel floor, 4/6 mm tear plate cover * Outer frame with rounded edges and holes for load securing, approx. every 500 mm * Axle lift, first axle, automatic function, with starting assist * 3x 9t axles, optional with disc or drum brakes * Axle spacing approx. 1310/1310 mm * Brand-name tires 385/65 R 22.5 * EBS braking system with Roll Stability Program * Smartboard/TIM/Info center, in addition to the H+S valve * LED lighting system * LED work lights Nsdpfxezba Euo Ag Iolh * 2x plastic toolbox * Pallet box or optional 2x long aluminum storage boxes, custom-made by Pavic (see images) * With OPIPA AL10 aluminum stakes (also available without stakes on request) Alternatively, can also be supplied with a sheet metal floor instead of a hardwood floor (weight difference: sheet metal floor +650 kg) Financing available through our financing partners. For further questions, our sales team will be happy to assist you. This is a non-binding offer. Subject to prior sale, errors and changes. = Further Information = Tire size: 385/65-22.5 Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Lift axle GVWR: 40,000 kg Body brand: PAVIC short timber platform, quick-change system General condition: very good Technical condition: very good Optical condition: very good

Condition: used, Technical details: floor-plate length: 4000 mm plate width: 1300 mm plate height: 190 mm Plate thickness: 95 mm weight of the machine ca.: 4,15 pro Platte t transport dimensions LxWxH: ca. 4,0 x 1,3 x 0,2 / pro Platte m Nljdou N D Ipjpfx Ag Ijh very good steel plate for sale free, packed in oiled paper and foil AP 4000x1300 - ground steel plate Ra 0.8 Surface ground Ra 0.8 according to drawing T-slots according to DIN 650: a=36; h=65; b=60 c=26mm, chamfered approx. 1.5mm Distance from edge: 100mm; center distance: 100mm (without attached 4x stop swivel) *

Condition: used, maximum load weight: 27,290 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 05/2020, loading space length: 13,800 mm, loading space width: 2,470 mm, loading space height: 2,853 mm, loading space volume: 92 m³, Equipment: ABS, SDS390 92³ X-TRA Long Sliding Floor Lift Axle SAF* German Trailer / German Semitrailer * 92 m³ * SAF axles * Lift axle * Disc brakes * Floor: Sliding floor with wear-resistant plate at the rear made of V2A steel, floorboards made of aluminum, 8 mm floor profile, ribbed design, end caps in aluminum* Tires: 385/55 R 22.5, 1st axle 9/9 mm, 2nd axle 12/10 mm, 3rd axle 11/9 mm * Overall length: 13800 mm * Overall width: 2550 mm * Internal length: 13460 mm * Internal width: 2470 mm Nsdpfx Aorwvl Tog Islh * Internal height at the front approx. 2655 mm * Internal height at the rear approx. 2853 mm * Tare weight: 7,710 kg * Permissible total weight: 35,000 kg * Payload: 27,290 kg * Air suspension * All information is subject to change without notice. * Further information and criteria available upon request. * Additional services: * Repainting, retrofitting possible * Short-term registration / customs registration / license plate * Transfer and shipment possible * Assistance with customs and export documents * Procurement of COC and EUR documents * On the market since 1991 * Leasing and financing possible. We have been working with various leasing companies for many years and can therefore find the optimal financing solution for every customer. We can often also support customers with poor credit ratings and connect them with good leasing partners. * Own workshop * Mówimy po polsku. * We speak English. * Goworim po russki * Repainting in your desired color is possible in our workshop at a reasonable price and in good quality. * Are you located further away and do not have the possibility or time to inspect and check a truck with us? No problem, you are welcome to order an independent expert of your choice to have the truck inspected technically and visually. If, contrary to expectations, a defect should occur, we can fix it quickly and effectively in our workshop. Furthermore, we can deliver your new used vehicle throughout Europe for an additional charge.

Condition: used, Technical details: floor-plate length: 4000 mm plate width: 1500 mm plate height: 450 mm weight of the machine ca.: 5,9 t transport dimensions LxWxH: 4,0 x 1,5 x 0,45 m Nljdpfx Aoy Rru Isg Ioh 3 units available – price per unit T-slot clamping plate Dimensions: 4000 × 1500 × 450 mm ·6 T-slots ·Heavy-duty design for machine setup, fixture construction and precision machining ·Ideal for milling, drilling and assembly applications *

Condition: used, axle configuration: 3 axles, first registration: 09/2025, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,825 mm, loading space volume: 93 m³, Chassis: Reinforced, continuous chassis design, new. Superstructure: Self-supporting design with corresponding reinforcements in the lower belt for particularly high stability and strength. Crossmembers, 140 mm high, reinforced design for high ground load. Additional reinforcement as a gusset plate in the front lower belt/vehicle frame area. Chassis made of galvanized steel up to the support structure. (Semi-trailer construction max. GVWR up to 39,000 kg) Nsdpfx Agjz S St Ao Ijlh Axles and Suspension: Disc brake 22.5". Jost (DCA) axle units, 3x9 tons with DCA air suspension, lifting and lowering function, Wabco Smartboard, electronic brake wear indicator (BVA) readable in the central control unit (display), 1st and 3rd axle lift including Optiturn and Optiturn. 1st axle with starting aid (without central control unit), tire pressure monitoring Wabco Trailerpulse with ZF rim-mounted sensors. Tires and Wheels: 6 wheels with tires size 385/65 R 22.5 according to manufacturer's choice (Br-Go-Co) on steel rims, silver, 11.75x22.5 ET 120. King Pin: 2" bolted into a 10 mm thick plate. Braking System: According to EC standard, EBS E-system Wabco with RSS system (Roll Stability Support) and premium modulator. Spring brake system acting on two axles with operation at the rear. Aluminum compressed air system. Electrical System: According to the guidelines of EC standards 91/633 and 97/28 with 2 five-chamber lamps, type Aspöck Eco LED 3, integrated in the aluminum rear panel. 24-volt system with 1x15-pole and 2x7-pole socket, with side marker lights in LED design, 2 reflective panels on the rear, position lights at the front 2x white, rear 2x red, 2 separate LED reversing lights integrated in the U-profile. Audio alarm when reversing. Superstructure/Body: Body fully welded inside. Reinforced side walls. Front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn. Aluminum body, side walls made of 30 mm thick aluminum plank profiles (2-3 mm), 600 mm wide, completely welded with upper and lower belt. Plank profiles fully welded inside. Floor laid as a sliding floor system on 140 mm aluminum crossmembers, floor load capacity approx. 9 tons/m2. Crossmembers mounted close together (approx. 350 mm). Aluminum front wall with 600 mm plank profile 2-3 mm thick in a straight design. Special aluminum corner profiles in a beveled design. Smooth rear wall in a straight design with 2 aluminum wing doors, 50/30 mm thick, with 2 swivel rod locks, mounted in the welded aluminum rear frame on Teflon and stainless steel bearings. Doors secured in the open position with one chain each on the side. Hard wear plates on the side walls, approx. 2,000x1,500x4mm, fully welded. Sliding residual discharge wall with Kevlar sheet, approx. 1,800 mm long, plus side Kevlar sheet seal. Service door on the left in the front wall, opening inwards. Hydraulic System: "Cargo - Floor" sliding floor system. Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE-HD sliders plus anti-lifting slide bearings, type CF 10 mm floor design. Hydraulics with approx. 200 mm working stroke. Fixed brackets on the front wall. Separate possibility for connecting the hydraulic line under the vehicle with fixed brackets. Line size NW 21. Fixed brackets with dimensions and design to be specified. Operating pressure 190-max. 240 bar. Aluminum end pieces welded into the sliding floor. Electrical control integrated in a lockable, watertight box on the l

Condition: used, Technical details: floor-plate length: 510 mm plate width: 270 mm Nljdpfeu N D Dwjx Ag Ijh Plate thickness: 65 mm very good steel plate for sale free, packed in oiled paper and foil Surface ground Ra 0.8 according to drawing T-slots according to DIN 650: a=36; h=65; b=60 c=26mm, chamfered approx. 1.5mm Distance from edge: 100mm; center distance: 100mm (without attached 4x swivel hoist ring) *

Condition: used, Technical details: Nsdeu R A A Uepfx Ag Islh floor-plate length: 640 mm plate width: 330 mm Plate thickness: 65 mm

Condition: used, Technical details: floor-plate length: 5600 mm plate width: 1890 mm plate height: 1. 335 2, 390 3, 370 mm weight of the machine ca.: 9,0 pro Platte t transport dimensions LxWxH: 5,6 x 1,89 x 335 (390) (370) m 3 clamping plates (price per plate) Weights: No. 1 = 8000kg; No. 2 = 9000kg; No.3 = 8500kg Material: Cast iron T-slots according to DIN 650 Slots lengthwise Number 6 Size a=36mm,h=64mm,b=60mm,c=25mm Center distance 315mm Through-hole Number 23 Size D=130 i.D. Nodpfxsu Rl Ugj Ag Iolh *

Condition: used, Year of construction: 1971, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area Sheet metal width: 2,000 mm Sheet metal thickness for St 42: 16 mm Passage width: 2,250 mm Overhang: 600 mm Knife and cutting Knife length: 2,005 mm Cutting gap adjustment: 0.05–0.95 mm Cutting angle: 1° 40′ Clamping beam: 10 pcs. Back gauge Gauge length: 1,000 mm Back gauge adjustment: 10–1,000 mm Work table Table size: 2,500 × 700 mm Table height above floor: 800 mm Hydraulics and Electrics Oil volume: 900 l Operating voltage: 380 V Machine data Machine weight: approx. 10 t Space requirement: approx. 3 × 2.3 × 2.3 m EQUIPMENT Foot switch Supports Spare knife Nljdpjz S Ng Hofx Ag Ieh

Condition: good (used), axle configuration: > 3 axles, first registration: 01/2003, total length: 13,670 mm, total width: 2,550 mm, wheelbase: 10,240 mm, color: other, Year of construction: 2003, Equipment: crane, Axle configuration Rear axle 1: Lift axle Rear axle 2: Lift axle Rear axle 3: Steering Rear axle 4: Steering Weights Empty weight: 8.480 kg Carrying capacity: 44.520 kg GVW: 53.000 kg Functional Crane: Hiab 130R-F2, year of manufacture 2000 Condition Nljdpfszucibsx Ag Ioh Technical condition: good Visual appearance: good Identification Registration number: OH-97-DD = Dealer information = We do not charge delivery costs. All trade-ins and financing are possible. Although we take great care in preparing our advertisements, it is possible that some of the options described may or may not be present on the car. Please check before purchasing that all the options described that are important to you are actually present. We are RDW certified. You can opt for an extended warranty; see our website for the packages. All our cars have a clear maintenance history and mileage registration. Our opening hours are: Monday to Friday from 9:00 a.m. to 5:00 p.m. and evenings by appointment. Saturday from 9:00 a.m. to 3:00 p.m. You can find us at: Middelingenseweg 22 5321 JH Hedel The Netherlands And reach us at: Trucks: Passenger cars: Website: Email:

Condition: used, Technical details: floor-plate length: 4200 mm plate width: 1200 mm plate height: 2000 mm Plate thickness: 180 mm Nodpfx Aju Nutieg Iolh weight of the machine ca.: 2590 kg Aluminum plate with 800 clamping holes, M8; countersunk Ø 11,5 x 15mm with 4 clamping holes, M24 The plate is placed on a wooden support frame. *

Condition: used, Technical details: floor-plate length: 4500 mm plate width: 1250 mm plate height: 250 mm Plate thickness: 250 mm weight of the machine ca.: 3,6 / pro Platte t Nljdpfx Asval Hdeg Ijh transport dimensions LxWxH: ca. 4,5 x 1,3 x 0,3 / pro Platte m There are 2 plates for sale. Material: Cast steel T-slots according to DIN 650 a=21; h=40; b=39.5; c=16mm; center distance T-slot to T-slot = 250mm *

Condition: used, Technical details: floor-plate length: 1500 mm plate width: 1250 mm plate height: 250 mm Plate thickness: 250 mm Nodpfeval Ihox Ag Iolh weight of the machine ca.: 1,1 / pro Platte t transport dimensions LxWxH: ca. 1,5 x 1,3 x 0,3 / pro Platte m There are 4x clamping plates for sale. Material cast steel T-slots according to DIN 650 a=21.5; h=40; b=38.5; c=17mm Center distance 250mm *

Condition: used, Technical details: floor-plate length: 4600 mm plate width: 1450 mm plate height: 300 mm Plate thickness: 300 mm weight of the machine ca.: 7,2 / Platte t 2 clamping plates ( price per plate) Material cast steel Finished surface T-slots according to DIN 650: a=40; h=66; b=71; c=29 mm Center stand 300mm 6x through holes Ø 41.0 mm Nedpfxjwtctgo Ag Iolh *

Condition: used, axle configuration: 3 axles, first registration: 05/2022, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,825 mm, loading space volume: 93 m³, Chassis: Aluminum chassis with reinforced continuous frame. Superstructure: Self-supporting design with corresponding reinforcements in the lower belt for exceptionally high stability and strength. Crossmembers, 140 mm high, reinforced design (for high ground load). Additional reinforcement as a gusset plate in the front lower belt/vehicle frame area. Chassis made of aluminum up to the support structure (trailer design, max. 39,000 kg). Axles and Suspension: Disc brake 22.5". Jost (DCA) axle units, 3x9-ton version with DCA air suspension, raising and lowering function, Wabco Smartboard information center, electronic brake wear indicator (BVA) readable on the control unit (display), 1st and 3rd axles liftable with starting assist (new EC regulation, without control unit option), 3rd axle with Optiturn control. Tires and Wheels: 6 wheels with tires size 385/65 R 22.5, approximately 50-60% tread, on Alcoa DuraBright rims, 11.75x22.5 ET 120. Kingpin: 2" kingpin, screwed into a 10 mm thick plate. Landing Gear: Nljds Ad Ti Iopfx Ag Ijh Mechanical landing gear with two speeds, 2x 20-ton support load with swivel foot. Braking System: According to EC standards, EBS E-system Wabco with RSS system (Roll-Stability-Support) and premium modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system. Electrical System: According to EC standards 91/633 and 97/28, with 6 LED three-chamber lights, type Aspöck Europoint, integrated in the aluminum rear panel, 24-volt system with 1x15-pole and 2x7-pole socket, with side marker lights in LED design, 2 reflective panels on the rear, front position lights 2x white, rear 2x red, 2 separate LED reversing lights behind the 3rd axle, 2 separate LED reversing lights on the sides, approximately at landing gear height, 1 LED interior light. Superstructure/Body: "Superstructure fully welded inside," reinforced side walls. Front wall load: 17,250 dkn, side and rear wall: 13,400/10,400 dkn. Aluminum body, side walls: 30 mm thick aluminum plank profiles (2-3 mm), 600 mm wide, completely welded in with upper and lower belt. Plank profiles fully welded inside, floor designed as a sliding floor system on 140 mm aluminum crossmembers, floor load capacity approx. 9 tons/m2, crossmembers mounted closely together (approx. 350 mm), aluminum front wall with 600 mm plank profile, 2-3 mm thick, in a straight design, special aluminum corner profiles in a sloping design, smooth rear wall in a straight design with 2 aluminum wing doors, 50/30 mm thick, with 2 swivel rod locking mechanisms, mounted in a welded aluminum rear frame in Teflon and stainless steel bearings, doors secured in the open position with one chain each on the sides, moving residual unloading wall with Kevlar lining, approx. 1,800 mm long, plus Kevlar seal on the sides, aluminum wear plates on the sides and rear, approx. 2,000x1,500x4 mm, service door in the front wall. Hydraulic System: "Cargo - Floor" Sliding Floor System Sliding floor system in the floor with hydraulically operated aluminum profiles on aluminum square profiles with approx. 880 PE-HD sliders, in addition to anti-lifting slide bearings, type CF, 10 mm floor, ribbed design. Hydraulics with approx. 200 mm working stroke, line size NW 21, fixed halves with a size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the sliding floor, electrical operation at the rear left, with remote control integrated into a lockable, waterproof bo

Condition: used, Technical details: floor-plate length: 3500 mm plate width: 2000 mm plate height: 360 mm Plate thickness: 360 mm weight of the machine ca.: 4,9 / pro Platte t Nsdpfsval Eyox Ag Islh transport dimensions LxWxH: ca. 3,5 x 2,0 x 0,4 / pro Platte m There are 2 plates for sale. (price per plate) Surface milled Longitudinal groove Quantity 8 Size a=35mm,h=62mm,b=60mm,c=25mm Center distance 250mm Side fastening D=27x58mm Quantity long side 3 short side 2 *

Condition: good (used), Year of construction: 1987, travel distance X-axis: 11,500 mm, travel distance Y-axis: 4,500 mm, travel distance Z-axis: 2,000 mm, feed length W-axis: 1,600 mm, x-travel 11,500 mm y-travel 4,500 mm w-axis 1,600 mm z-axis 2,000 mm Nedpfj Afwnqox Ag Ijlh Spindle diameter 200 mm Rotary table 3,000 x 4,000 mm Bed length of rotary table 4,600 mm Tool holder SK50 Workpiece weight on rotary table 80 t Total power requirement 83 kW Additional information incl. 15 plates