Used Fliegl Zts 200 P for sale (52,390)

Condition: used, machine/vehicle number: WFDFLT21802025375, empty load weight: 2,620 kg, maximum load weight: 15,380 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 04/2019, tire size: 385/65 r22,5, Year of construction: 2019, Further information Pgodpfx Aji Riz Hjhyok Welded fine-grained steel construction, front stop, longitudinally adjustable and foldable, pair of removable guide rollers, front and rear, pair of removable guide rollers, additional 4 container locks with sturdy outriggers on 20-base for swap bodies 7.15 and 7.45, turntable with strong ball bearing slewing ring, wheel chocks with holder Aluminum side bumpers, steel underride guard, quarter-shell mudguards at the front and half-shell mudguards at the rear 1 spare wheel holder for 1 e-wheel, with wheel fastening set in basket design Drawbar with tested 40 mm drawbar eye, drawbar height adjustment via spring BPW disc brake axles, axle/chassis laser-measured Reduction in tire wear and fuel consumption, air suspension 2-line compressed air brake systemColor-coded line routing for easy servicing. Air supply 208 liters Spring-loaded parking brake, 2 swap-proof coupling heads at the front, with connecting lines to the motor vehicle, EBS made by Wabco, electronic brake system with EBS plug at the front, with connecting cable, (Attention: The trailer vehicle may only be towed by towing vehicles that guarantee the effectiveness of the ABS!) with lifting & lowering valve, holding function in the lowering / lifting position in each case 24 volt, 4 x 3 chamber lights + 1 round reversing light + 1 round rear fog light, amber LED lighting at the side, 2 white position lights at the front, 2 white/red lane departure lights at the rear, 1 x 15-pin plug at the front, with connecting cable, 1 additional LED work light(s) at the rear, switched via reversing light, 1 LED work light at the front in the middle between the beams, radiating to the rear, switched via reversing light Country of registration: Germany, with Dekra approval and certificate (according to §13 EG - FGV), prepared for single-line license plate holder, contour markings with reflective strips according to ECE R 048, white at the sides and red at the rear

Condition: used, machine/vehicle number: WFDFLT21801003760, empty load weight: 4,480 kg, maximum load weight: 13,520 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 05/2014, tire size: 445/45 r19,5, Year of construction: 2014, Further information Fine-grained steel welded construction 1 gear support foot at the front, with straight lower section and single-sided operation in FR right Wheel chocks with holder, aluminum side bumpers, steel underride guard Half-shell mudguards protrude slightly over the main frame, bumpers at the rear Tandem trailer towing device Towbar with tested 50 mm towing eye, forwarding agent version, under-coupler towbar Axles + suspension BPW disc brake axles, manufacturer's choice Air suspension with lift & lower valve Wheels and tires 445 / 45 R 19.5, manufacturer's choice, steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake, Duomatic connection at the front, with connecting cable to the motor vehicle, EBS, electronic braking system with EBS plug at the front, with connecting cable Make Haldex, Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Floor: Platform length approx. 7,300 mm, screen-printed floor Front wall: aluminum approx. 1,200 mm, steel corner stanchions in volume design Electrical system 24 volt, multi-chamber lights, amber LED lighting at the sides 2 white position lights at the front 2 white/red lane departure lights at the rear 1 x 15-pin plug at the front, with connecting cable Approval / plates Country of registration: Germany, with Dekra approval and certificate Podpfjni Udzjx Ahyogk 24/7 service hotline, prepared for single-line license plate holder, contour marking with reflective strips to ECE R 048, white at the sides and red at the rear

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT34202036640, empty load weight: 6,213 kg, maximum load weight: 35,787 kg, overall weight: 42,000 kg, axle configuration: 3 axles, next inspection (TÜV): 05/2026, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,600 mm, loading space volume: 27 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,310 mm, suspension: air, tire size: 385/65 R22.5, tire condition: 80 %, color: yellow, Year of construction: 2025, The images shown are archive photos; the vehicle may still be in use! Pgodpfxsyylapo Ahyjk Approx. fifth wheel height: 1200 mm Chassis: Semi-trailer tipper Basic lightweight construction, kingpin plate with interchangeable 2" kingpin, patented curved front bulkhead Folding underrun protection, underrun protection with spring assistance for easier handling Integrated mudguard bracket with stone-repellent surface Axles & Suspension: SAF disc brake axles with 430 mm disc diameter; axles/chassis laser-aligned to reduce tire wear and fuel consumption Air suspension 1st axle with automatic lift axle including forced lowering and starting aid, activation by "3x braking" (starting aid is functional up to a 30% axle overload and up to a maximum speed of 25 km/h) Braking system: 24 Volt EBS electronic braking system with EBS socket at the front (no connection cable), test port for brake cylinder pressure routed to the outside of the EBS module, with raise & lower valve Paver brake, electrically operated from the truck without truck installation, automatic tipper lowering with shut-off valve "TPMS" tire pressure monitoring system as per ECE R141, display via monitor in towing vehicle through EBS (requires appropriate truck setup; only for standard tires) Axle load detection via EBS-CAN bus signal for display in the cab; truck must be preconfigured, no truck installation Wheels and Tires: 385/65 R22.5 steel rims Electrics: Side-mounted yellow LED lights synchronised with indicators (flashing side lights) 2 white front position LED lights 2 white/red rear marker LED lights LED work lights on both sides; 2 additional work lights integrated into the rear Hydraulics: Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm (without hose connection) Operation hydraulically via truck PTO (power take-off) Body/Tub: Steel round body in "Stone Master Design" made of highly wear-resistant HB 400/450 steel. Sloped front wall with external hydraulic cylinder mount. Internal ladder at the front bulkhead Greenline - conical and aerodynamic body shape “Membrane” tailgate Tailgate as hydraulic rear door opening upwards; clearance approx. 2,200 mm Side walls continuously 5 mm thick, base continuously 8 mm thick Body is insulated version, Fliegl Asphalt Profi Thermo, body insulated at the front, sides, bottom, and rear with Fliegl Isotherm "Flip Top sliding cover", automatic rear lock as folding hoop. Cover built to front. Electrically operated cover with 7-pin plug (charging plug) at front, no connection cable, no truck installation; operation on trailer and via remote control. Operational notes: For transport of salt, lime, etc., we recommend a tipping cylinder with a hard-chromed piston rod to prevent damage and corrosion from the material. The specified gross weight is technically possible, but depending on the load, the gross weight may not be achievable while observing permissible axle, support, and coupling loads. (Improper load distribution may lead to poor driving and tracking performance) Paintwork: Frame: DB 7350 Nova Grey "10 years warranty against corrosion" Support legs: black coated Body: RAL 1007 Narcissus Yellow Roll tarp: RAL 7038 Agate Grey

Condition: used, overall weight: 13,500 kg, axle configuration: 2 axles, first registration: 03/2015, Equipment: ABS, * Fliegel 2-axle tandem trailer * TPS 135 * Curtain-sided body Podpfx Aoyx R Ehshyegk * Air suspension * SAF axles * Downrated to 10 t / Technically possible 13,500 kg * Unladen weight 3,615 kg

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: WFDFLT21801013661, empty load weight: 3,500 kg, maximum load weight: 14,500 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 03/2024, total length: 9,770 mm, total width: 2,550 mm, total height: 1,150 mm, suspension: air, tire size: 265/70 R19,5", color: grey, Year of construction: 2024, The images shown are archive photos; the vehicle may still be in use! Weights and Dimensions: Gross weight: 18,000 kg Unladen weight (basic version) approx.: 3,500 kg +/- build tolerance Payload approx.: 14,500 kg Axle load: 9,000 kg Overall length approx.: 9,770 mm Maximum overall width: 2,550 mm Roller track length approx.: 7,080 mm Loading height approx.: 1,150 mm Drawbar height approx.: 800 mm Drawbar length approx.: 2,500 mm Chassis: Turntable Waste Disposal Trailer Fine grain steel welded construction 2 longitudinal beams with cross members, upper side of longitudinal beams designed as a container roller track in wear-resistant version, loadable from the rear, with run-up slope. Suitable for roll-off containers of 6.0/6.5/7.0 m. Container locking system: - 2 pairs of locking hooks recessed in the floor - Pneumatic operation The container locking system is a 2-point, internally acting mechanism; containers with interior webs cannot be locked. (Suitable for transporting roll-off containers with subframe according to DIN 30722) (Roll-off containers are loaded and unloaded from the rear.) Heavy-duty turntable with robust ball bearing ring Wheel chocks with holder Side underrun protection made of aluminium Rear underrun protection made of steel Half shell mudguards Lockable plastic toolbox, width=600 mm / height=425 mm / depth=460 mm Open storage box for container net Turntable trailer coupling Pgodpfx Ahoyxq H Esyjk Drawbar with tested 40 mm towing eye Drawbar height adjustment via spring Axles & Suspension: SAF disc brake axles "Axle/chassis laser alignment" for reduced tire wear and fuel consumption Air suspension with lift & lower valve Wheels and Tires: 265 / 70 R 19.5" (manufacturer's choice) 8 steel rims in twin arrangement, factory silver Brake System: 2-line compressed air brake system Spring-loaded parking brake Drive-away lock: When the container lock is open, the spring-loaded parking brake is activated. Vehicle – Driving Stability System: Duomatic coupling at the front with connecting line to the truck, 24V EBS electronic braking system with EBS plug at front, with connecting cable Note: The trailer may only be towed by vehicles that can ensure the functionality of the ABS! Electrics: 24 Volt, multi-chamber lights, yellow LED side marker lights 2 white position lights at front 2 white/red lane marker lights at rear 1 x 15-pin plug at front with connecting cable 2 additional LED work lights at the rear, operated via reverse light The images shown are archive photos; the vehicle may still be in use!

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT21802027375, empty load weight: 2,620 kg, maximum load weight: 15,380 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 10/2020, total length: 9,470 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 30 %, color: grey, Year of construction: 2020, The images shown are archive images! Weights and Dimensions: Gross weight: 18,000 kg Payload approx.: 15,380 kg Aggregate load: 18,000 kg Unladen weight (basic version) approx.: 2,620 kg +/- construction tolerance Overall length with swap body 7,450 mm approx.: 9,470 mm Overall width max.: 2,550 mm Chassis height lowered approx.: 1,180 mm Chassis height raised approx.: 1,380 mm Chassis height in driving position approx.: 1,260 mm Parking height approx.: 1,220 to 1,320 mm Standard stop to front locking approx.: 800 mm Locking distance: 5,853 mm Drawbar height approx.: 800 mm Drawbar length (set at) approx.: 2,200 mm Clear drawbar length from stop with swap body 7,450 approx.: 1,970 mm Parking heights are based on level ground. Note! No articulation possible when lowered! Fine-grain steel welded construction Fliegl "V-Stream" frame Adjustable and foldable front stop Removable pair of guide rollers, front and rear 4 container locks with sturdy outriggers on 20"-base for swap bodies 7.15 and 7.45 Turntable with strong slewing ring 2x wheel chocks with holder Aluminum side underrun protection Side underrun protection positioned inward for optimal clearance to swap body supports Steel rear underrun guard Rear underrun guard shortened for optimal clearance to swap body supports, lighting unit mounted protected Half-shell mudguards Without impact protection Drawbar coupling for turntable trailer Drawbar with tested 40 mm towing eye Drawbar height adjustment via spring Axles & Suspension: SAF disc brake axles "Axles/chassis laser-aligned" to reduce tire wear and fuel consumption Air suspension Braking system: 2-line compressed air brake system, color-coded lines for easy servicing. Air reservoir 208 liters Spring-loaded parking brake Podpfjyxqrzox Ahysgk 2 interchangeable coupling heads at the front, with connecting pipes to the truck, EBS, electronic braking system with EBS socket at the front, with connecting cable, Note: The trailer may only be towed by tractors which ensure effective ABS performance! With lift & lower valve, holding function in both raised and lowered positions Wheels and Tires: 385/65 R22.5, make as per manufacturer's choice Steel rims, factory silver Electrics: 24 Volt, multi-chamber lights, LED side marker lights (yellow) 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin interchangeable plugs at the front, with connecting cable Registration Country/License Plates: Germany With Dekra approval and certificate (in accordance with §13 EC-FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips according to ECE R 048, white on the sides, red at the rear Paintwork: Frame hot-dip galvanized incl. passivation "15-year warranty against rust-through" The images shown are archive images!

Condition: used, empty load weight: 5,300 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 09/2018, total length: 2,550 mm, total height: 13,100 mm, suspension: air, tire size: 385/65R22,5, | Fliegl 30-foot tipping chassis | BPW axles | Lift axle | Alloy wheels | Top condition | Austrian vehicle Psdjyp Hd Hepfx Ahyjgk

Condition: used, maximum load weight: 28,560 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 02/2023, next inspection (TÜV): 03/2026, loading space length: 12,032 mm, loading space width: 2,352 mm, loading space height: 2,698 mm, loading space volume: 68 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2023, Equipment: ABS, FLIEGL 3-axle container chassis rigid with 40 FT Highcube container First registered in 2023 Total weight (technical) 38,000 kg Pgedpfx Ajvzk Nashyek Empty weight of chassis 3,640 kg Empty weight of HighCube container 5,800 kg SAF axles with large disc brakes, 430 mm 1st axle LIFT AXLE, with starting aid with vehicle driving stability system Axle load detection Tires 6-fold 385/55 R 22.5 40 FT Highcube container right side wall can be opened as doors (multiple wings), door dimensions L 2,340 x W 2,585 mm Portal doors at the rear Dimensions i.L. (LxWxH) 12,032 x 2,352 x 2,698 mm Volume 68 cbm 25 Euro pallets Accessible with pallet truck and forklift 1-A condition RENT is the new BUYING, also available from us as a full-service rental-----

Condition: good (used), axle configuration: 3 axles, first registration: 08/2011, suspension: air, Year of construction: 2011, Equipment: ABS, = Additional Options and Equipment = - EBS (Electronic Braking System) - Lift axle - Air suspension = Further Information = Axle configuration Suspension: Air suspension Rear axle 1: Lift axle Rear axle 2: Steerable Weights Unladen weight: 7,100 kg Payload: 31,900 kg gross vehicle weight: 39,000 kg Condition Technical condition: Good Visual condition: Good Warranty Warranty: No liability for printing & typographical errors. Subject to changes, prior sale, and mistakes! Further Information Please contact Emad Al Shogran for more information. Vehicle number: Trailer: 12 Fliegl / BPW / Steering + Lift Axle / Extendable .: WFDFLT333501001822 German vehicle TÜV: General Inspection: 05.2024 - Safety Inspection: 11.2023 F.1 Technically permissible total mass in kg: 39,000 G Unladen weight: 7,100 kg Steering + Lift Axle BPW axle Extendable = Company Information = No liability for printing & typographical errors. Subject to alterations, prior sale, and errors! Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Tel.: Psdpfxoydqn Ee Ahyegk Mobile: Ms. Sabine Faust Email:

Condition: used, axle configuration: 3 axles, first registration: 06/2015, color: other, Year of construction: 2015, = Additional options and accessories = - Lift Axle - Steering axle = Remarks = Fly, 2015, BPW axles, Axle 1 liftable, As 3 guided along, Unloaded by means of a sliding wall = More information = Rear axle 1: Lift axle Rear axle 2: Steering Psdjym Dchjpfx Ahysgk = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: new, machine/vehicle number: 7383bc2b7f580f0cb319b52f7, empty load weight: 5,400 kg, maximum load weight: 33,600 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,450 mm, loading space volume: 25 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 2,960 mm, suspension: air, tire size: 385/65 R 22.5, Further information Chassis: Semi-Trailer Tipper Fine-grained steel welded construction, lightweight design, fifth wheel plate with replaceable 2" kingpin Curved front end, patented Telescopic support centrally mounted, uncoupling when loaded not possible; when uncoupled, the vehicle must be positioned tilted toward the rear. Wheel chocks with holder Foldable underrun protection Half-shell mudguards Integrated mudguard holders with stone-repellent surface Splash guards behind the last axle, asphalt version, hinged to the mudguard, with hanging option at top of mudguard, mudguard shortened Tow hook at rear Axles & Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser alignment reduces tire wear and fuel consumption Axles in off-road version Air suspension 1st axle: automatic lift axle, including forced lowering and traction assistance Hot-dip galvanized lift axle mechanism with 10-year anti-corrosion warranty Brake System 2-line compressed air brake system, color-coded line routing for easy servicing Spring-loaded parking brake Podpji Rix Iofx Ahyogk 2 fail-safe coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connection cable Attention: The trailer may only be towed by tractors that ensure effective ABS function! With lift & lower valve Vehicle driving stability system Wheels and Tires 385/65 R22.5 Steel rims, factory silver "TPMS" Tire Pressure Monitoring System compliant with ECE R 141, display via tractor head unit through EBS, not installed in truck (must be prepped in truck, only for basic tire set) Electrics 24 volt system, multi-chamber lights, yellow LED side lighting Yellow LED side lights linked to indicator – "flashing side marker lights" 2 white position lights at front 2 white/red lane marking lights at rear 2 x 7-pin fail-safe sockets at front, without connection cable Hydraulics High-pressure cylinder max. 250 bar, with HDK screw coupling, fixed part, NW 48 mm (without hose connection) Operated hydraulically via truck PTO Body Steel round body in Stone Master design made from highly wear-resistant HB 400/450 steel. Slanted front wall with external hydraulic components and access steps at the front wall. Membrane rear wall Rear wall as pendulum flap, externally mounted with double hook lock. 2 clamping bolts with T-locks on the lower sides. Side walls throughout 4 mm thick, floor 4/5 mm thick, wear- and weight-optimized design Body insulated design, Fliegl Asphalt Profi Thermo, insulated at front, side, bottom and rear with Fliegl Isotherm. Cover: BASIC, tarpaulin side cover Standing platform with access, connection plate for air/electric and brake with large space for optimal operation. Side roll tarp, stowed to the right side, central locking on left Approval/Country/License Plates Germany Type approval per EG 2007/46 Body strength per EN 12642 24/7 service hotline Manufacturer certificate for thermal vehicles as per RS 10 - 2013 Prepared for single-line license plate holder Warning panel per ECE 70 Paintwork Frame: DB 7350 novagrau (new gray) "10-year anti-corrosion warranty" Support legs: galvanized Body/Side tarp: RAL color as desired, single-color Roll tarp: RAL 7035 light gray Thermal insulation also available in BASICplus (sheet metal cover) and Premium (stainless steel cover)!

Condition: like new (used), Year of construction: 2010, TETRA PAK A3 COMPACT FLEX 200/250 EGDE COMPLETE LINE INCLUDES: 1. TETRA PAK A3 COMPACT FLEX QUICK CHANGE 200/250 EDGE FILLER V200, YOM 2010 15.120 RUNNING HOURS CAPACITY 9.000 CARTONS PER HOUR 2. TETRA PAK ACHX 10-0400-44 HELIX CARTON ACCUMULATOR V400, YOM 2010, 17.431 RUNNING HOURS 3. TETRA PAK STRAW APPLICATOR TS30 U-FORM APGRATED V300, YOM 2010 4. TETRA PAK APPLICATOR CAP30 FLEX PRO23 V200, YOM 2010, 10.914 RUNNING HOURS 5. TETRA PAK FILM WRAPPER 32 V400, YOM 2010, NEVER USED, ONLY 45 HOURS! 6. TETRA PAK CARDBOARD PACKER CBP 32 V400, YOM 2010 WRAP AROUND 7. TETRA PAK LINE CONTROLLER LC30+ 8. CONVEYORS SYSTEM 9. INC PRINTER VIDEOJET 1620 Pgjdpfjya Nf Isx Ahysk THE LINE IS IN AS NEW CONDITION. LOCATION - SWEDEN. READY FOR DISMANTLING AND SHIPPING IMMEDIATELY. PRICE UNDER REQUEST

Condition: used, machine/vehicle number: WFDFLT33902010193, axle configuration: 3 axles, first registration: 07/2013, suspension: air, tire size: 385/65, tire condition: 30 %, color: other, Year of construction: 2013, = Additional options and accessories = - ADR - Air Suspension - BPW Axles - Disc brakes = More information = Tyre size: 385/65 Podpfx Ahjx Sdg Eoyjgk Make axles: BPW Tyre profile: 30% Brakes: disc brakes Suspension: air suspension

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT45001013946, empty load weight: 12,100 kg, maximum load weight: 37,900 kg, overall weight: 50,000 kg, axle configuration: > 3 axles, first registration: 01/2025, loading space length: 9,200 mm, loading space width: 2,480 mm, loading space height: 3,200 mm, total length: 13,750 mm, total width: 2,550 mm, total height: 4,070 mm, suspension: air, tire size: 205/65 R 17,5 ", maximum speed: 90 km/h, color: blue, Year of construction: 2024, Equipment: tail-lift, The images shown are archive photos; the vehicle may still be in use! Jumbo Low Loader Chassis for construction machinery transport up to 36,000 kg and a maximum external machine width of 2,500 mm. Fifth wheel plate with replaceable 2" king pin. Rear slope approximately 1,500 mm long at 7°. Ramp shaft closed at top with steel/checker plate. Trailer B-dimension: 12,000 mm Free rear swing radius approx.: 2,350 mm Spare wheel carrier with 1 spare wheel Plastic toolbox In the low-bed: Omega rail laterally below the outer frame as a lashing bar for tarpaulin and spacer holders for lashing pins, not within the wheel area. Podeylkywepfx Ahysgk Lashing Points: Gooseneck: - 5 pairs of lashing points recessed in outer frame, each rated at 5 t - 2 pairs of lashing pins recessed on top and side of outer frame, each rated at 10 t Low-bed: - 7 pairs of lashing pins recessed on top and side of outer frame, each rated at 10 t - 9 pairs of lashing points recessed in outer frame, each rated at 5 t - 3 pairs of additional folding lashing points recessed in the low-bed floor, each 10 t (1x before the drop, 1x in front of the 1st axle, 1x behind the 3rd axle) Axles & Suspension: - Drum brake axles - Last 2 axles self-steering - Air suspension with lift & lower valve + auto-reset function - Raise & lower function with quick release Wheels and Tires: - 205 / 65 R 17.5 for 8,000 kg axle load technical max. at 90 km/h - Steel rims twin arrangement Brake System: - 2-line air brake system - Spring-loaded parking brake - 2 non-interchangeable coupling heads at front, without connecting line - Knorr EBS Electrics: - 2 pairs of double LED warning panels, extendable - 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at front - 24 Volt, multi-chamber LED lights - Flashing side marker lights - Beacon with holder - Interior LED work light on front wall - 2 additional LED work lights at rear, switched via reversing light Floor: - Floor designed for maximum forklift axle load of 10,000 kg at minimum 300 mm tire width (note: deformation possible!) Stakes: - 3 pairs of sliding stakes, movable along entire length, with four insert sockets each; only the rear 2 zones are of equal length! - Stake positions: 1x gooseneck, 3x in low-bed Insert Slats: - 5 rows of wooden insert slats Access Ramps: - Ramp surface with "Mega Grip" serrated grating (max. forklift axle load 9,000 kg at min. 200 mm tire width) - Hydraulically operated via independent electric unit installed in stainless steel box front-right, including ramp control; additional operation via radio remote control incl. rear support operation, customer's responsibility! NATO socket on truck required, including connecting line to truck as spiral cable; connection line must NOT be connected while driving! Truck not included. - Steel ramp full width, approx. 3,300 mm long + 3-part aluminium foldable section approx. 900 mm for total ramp length 4,100 mm; if necessary, additional phenolic board max. 9 mm thick under aluminium sections for reduced ramp angle; ramp load capacity 26,000 kg, heavy-duty version; over ramp shaft steel/checker plate; ramp secured during transit with top link. Exact specification available on request!

Condition: used, maximum load weight: 33,500 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 02/2018, next inspection (TÜV): 02/2026, Equipment: ABS, Fliegl SDS 390 curtain side trailer, BPW axles, air suspension, height adjustment, lift axle, EBS, ABS Pjdpfx Ahox A Rkpeyegk Next inspection 02/26 Trailer has been in an accident. Fully operational. Tarp is damaged.

Condition: used, Basic dimensions: Width: approx. 3,200 mm Height: approx. 938 mm Depth: approx. 600 mm Technical data for the workbench: Manufacturer: Dexion Type: P 90 The scope of delivery includes: 02x workbench stand, used Material color: green Stand height: 900 mm Stand depth: 600 mm Incl. cross and diagonal struts, foot plates The stands are pre-assembled ( bolted framework ) 04x Workbench traverse, used Material color: orange Truss profile: I: 120 x 50 mm clear width: 3,000 mm 08x locking pin, used Version: sendzimir galvanized For securing the side rails against unintentional lifting out 01x Chipboard II. Choice, used Chipboard thickness: 38 mm Chipboard width: 3,200 mm Depth chipboard: 600 mm Surface: possibly coated (two-piece if required) 01x Chipboard II. Choice, used Chipboard thickness: 38 mm Chipboard width: 2,980 mm Depth chipboard: 600 mm Surface: possibly coated (two-piece if required) 06x drilling screw, new Finish: galvanized Dimensions: 6.3 x 70 mm 08x Z-bracket, used for locking / inserting chipboard Surface galvanized Remark: Pgedjthfddopfx Ahyek - The pictures serve to illustrate the material. - The material color may vary. - The workbench frames are commissioned unassembled; - The workbench stands are pre-assembled; - The production time is usually approx. 3-5 working days. You are also welcome to purchase the workbenches from us in the following depths: Workbench 3,200 x 700 mm / 2 levels / (271.00€ incl. 19% VAT) Workbench 3.200 x 800 mm / 2 levels / (282,00€ incl. 19% VAT) Workbench 3.200 x 900 mm / 2 levels / (293,00€ incl. 19% VAT) Workbench 3,200 x 1,000 mm / 2 levels / (304.00€ incl. 19% VAT) Workbench 3,200 x 1,050 mm / 2 levels / (309.00€ incl. 19% VAT) Workbench 3.200 x 1.100 mm / 2 levels / (315,00€ incl. 19% VAT) Workbench 3,200 x 1,200 mm / 2 levels / (325.00€ incl. 19% VAT) Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: good (used), The scope of delivery includes: 01x shelf connector, used Podpfxsi Hph Sj Ahyegk Material color: orange Manufacturer: Vogelsang Type: NS suitable for frame profile width: approx. 100 mm for shelf distance: approx. 200 mm dim. head plates: 128 x 90 mm profile dim.: C 46 x 23 mm Weight: approx. 1,200 kg | pcs. General information about the article: This article is offered for pick-up only. Any additional transport or shipment of this article is associated with additional costs, which can be requested separately from us. depending on the delivery location or scope of delivery can be requested from us.

Condition: used, machine/vehicle number: WFDFLT33902010171, axle configuration: 3 axles, first registration: 06/2013, color: other, Year of construction: 2013, Please contact us for more information. Pgsdpfsyhb H Hex Ahyjk

Condition: good (used), End mill, milling cutter, shank thread milling cutter, thread cutter -Manufacturer: JAL PWS P, 29 pieces shank thread milling cutters -Hole: Ø 27 mm 25 pieces, Ø 32 mm 4 pieces -Various types: see photos Pgedpfx Ahsgfcm Reyok -Sizes: see photo parts list -Price/Sale: complete -Dimensions: 240/180/H150 mm -Total weight: 4.2 kg

Condition: used, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 05/2015, loading space length: 13,600 mm, loading space width: 2,520 mm, Equipment: ABS, Schmitz Cargobull S01 Flatbed with Lifting Axle and SAF Axles Ref. No. for inquiries: 1225958 * ABS * EBS Pgsdpjyavigjfx Ahyjk * 3 axles, air-suspended * Lifting axle * Disc brakes * SAF axles Loading area dimensions: Length: 13,600 mm Width: 2,520 mm Tyres: 1st axle: 385 / 55 R 19.5 30% air-suspended / lifting axle 2nd axle: 385 / 55 R 19.5 30% air-suspended 3rd axle: 385 / 55 R 19.5 30% air-suspended ----Price: €3,900 + 19% VAT For further questions, you can reach us at the following phone numbers: * We speak: German, English, French, Polish, and ????? Errors, omissions, and prior sale reserved.

Condition: new, machine/vehicle number: 8af4af460e7016a96d927f8f6, empty load weight: 3 kg, maximum load weight: 14 kg, overall weight: 18 kg, axle configuration: 2 axles, tire size: 385/55 r22.5, Further information Chassis Wechel central axle trailer Fine-grained steel welded construction Front stop, longitudinally adjustable and foldable Pair of removable guide rollers, front and rear 4 container locks with sturdy outriggers on 20-basefor swap bodies 7.15 / 7.45 and 7.82 1 pair of front gear support legs, with straight lower section and single-sided operation in FR right 2 wheel chocks with holder Aluminum side impact guard Side collision protection set inwards, for optimum clearance to the swap body supports Steel underride guard Half-shell mudguards Spray flaps Towing device central axle trailer Towbar with tested 50 mm towing eye, forwarding agent version (not suitable for trucks with tail lift, or exact testing still required in the event of an order) Towbar clamped/bolted, easily replaceable and partially adjustable in length! Towbar under-coupler, free towbar length approx. 2200 mm Towing height: 380 (Note! is not printed in the offer, compare with the technical data on the first page) Folding bracket with spring support on the drawbar, for guiding the connecting cable to the truck Axles + suspension SAF disk brake axles Axle/chassis laser-measured Reduction of tire wear and fuel consumption Air suspension Brake system 2-line compressed air brake systemColor-coded line routing for easy servicing. Air supply 208 liters Spring-loaded parking brake 2 swap-proof coupling heads at the front, with connecting lines to the engine trolley, connection in FR right-hand side EBS, electronic brake system with EBS plug at the front, with connecting cable, connection in FR right-hand side Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve, holding function in lowering / lifting position respectively Vehicle - driving stability system Wheels and tires 385/55 R22.5 Manufacturer's choice Steel rims, factory silver Electrical system 24 volt, multi-chamber lights, amber LED lighting at the sides 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin interchangeable plugs at the front, with connecting cable, connection in FR right-hand side Additional LED work light(s), integrated at the rear, switched via reversing light LED work light at the front, centered between the carriers, radiating to the rear, switched via reversing light Country of registration / plates Germany with Dekra approval and certificate (according to §13 EG - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear Paint finish Frame DB 7350 nova gray10-year warranty against rusting through Psdpfx Ahoi Riw Usyogk Attention: Archive pictures!

Condition: new, machine/vehicle number: 5b4d5b70c0e4954373dd5bf0b, empty load weight: 3 kg, maximum load weight: 14 kg, overall weight: 18 kg, axle configuration: 2 axles, tire size: 435/50 r19,5, Further information Chassis change central axle trailer Fine-grained steel welded construction Front stop, longitudinally adjustable and foldable 2 pairs of removable guide rollers, front and rear 4 container locks with sturdy outriggers on 20-basefor swap bodies 7.15 / 7.45 and 7.82 1 pair of front gear support legs, with straight lower section and single-sided operation in FR right 2 wheel chocks with holder Aluminum side bumpers Steel underride guard Half-shell mudguard Spray flaps Towing device central axle trailer Tow bar with tested 50 mm towing eye, forwarding agent version (not suitable for trucks with tail lift, or exact testing still required in case of order) Under-coupler drawbar, free drawbar length approx. 2200 mm Pedpfx Aei Ri Iwohysgk Towing height: 380 (Note! is not printed in the offer, compare with the technical data on the first page) Axles+suspension SAF disc brake axles Axle/chassis laser-measured Reduction of tire wear and fuel consumption Air suspension Brake system 2-line compressed air brake system Colored line routing for easy servicing. Air supply 208 liters Spring-loaded parking brake 2 swap-proof coupling heads at the front, with connecting lines to the engine trolley, connection in FR right-hand side EBS, electronic brake system with EBS plug at the front, with connecting cable, connection in FR right-hand side Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve, holding function in both lowering / lifting position Wheels and tires 435/50 R19.5 tires of the manufacturer's choice Steel rims, factory silver Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin interchangeable plugs at the front, with connecting cable, connection in FR right-hand side 2 additional LED work lights at the rear, switched via reversing light 1 LED worklight at the front, centered between the carriers, radiating to the rear, switched via reversing light Country of registration / plates Germany with Dekra approval and certificate (according to §13 EG - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear Paint finish Frame DB 7350 nova gray 10-year warranty against rusting through Attention: Archive pictures!

Condition: new, machine/vehicle number: d0373d7a64f0aead858df4eb5, empty load weight: 2,621 kg, maximum load weight: 15,379 kg, overall weight: 18,000 kg, axle configuration: 2 axles, tire size: 385/55 r22.5, Further information Chassis Changing turntable Fine-grained steel welded construction Fliegl V-Stream frame Front stop, longitudinally adjustable and foldable Pair of removable guide rollers, front and rear 4 container locks with sturdy outriggers on 20-basefor swap bodies 7.15 and 7.45 Turntable with sturdy ball bearing slewing ring Wheel chocks with holder Aluminum side collision protection (Fliegl standard) Side collision protection set inwards, for optimum clearance to the swap body supports Steel underride guard (Fliegl standard) Underride guard shortened for optimum clearance to the swap body supports, lighting system mounted protected Half-shell mudguards (front if technically possible otherwise with sheet metal cover + quarter-shell mudguards) With anti-spray flaps behind each axle Rubber bumper protection at the rear Towing device trailer turntable Towing fork with tested 40 mm towing eyeParking sockets for electrics/ ABS on towing forkBrake/electrical connection plate on towing fork, EBS and electrics removable, all connecting lines to towing vehicle as reversible flex lines Axles+suspension SAF disc brake axles with 430 mm disc diameter Axle/suspension laser-measured Reduction in tire wear and fuel consumption Air suspension Brake system 2-line compressed air brake systemColor-coded line routing for easy servicing. Air supply 208 liters Spring-applied parking brake Duomatic connection at the front, with connection line to the motor vehicle, as a spiral cable Pgodpfoi Ri Rgjx Ahyok EBS make Wabco, electronic brake system with EBS plug at the front, with connection cable detachable as spiral cable, Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve, holding function in lowering / lifting position + auto-reset function, quick release valves on all axles Vehicle stability system Axle load detection via EBS-Canbus signal, for indication via display in driver's cab, truck must be prepared accordingly, no truck installed (no calibrated scales) Wheels and tires 385/55 R22.5 make of the manufacturer's choice Steel rims, factory silver Electrical system 24 volt, multi-chamber lights in LED with resistor, amber LED lighting on the side, license plate lighting in LED, (Note! with certain towing vehicles, misdiagnoses can occur, although the function is given) 2 white front position lights in LED 2 white/red rear lane departure lights in LED 1 x 15-pin plug at the front, with connection cable detachable as spiral cable, Additional LED work light(s) at the rear, switched via reversing light LED work lights at the front, centered between the carriers, radiating to the rear, switched via reversing light Country of registration / plates Germany with manufacturer confirmation + brake calculation 24/7 service hotline Prepared for single-line license plate holder Warning sign according to ECE - 70 Contour markings with reflective strips according to ECE R 048, white at the sides and red at the rear Paint finish Frame DB 7350 nova gray 10-year warranty against rusting through Attention: Archive pictures!

Condition: new, machine/vehicle number: 9de849c07b4d917b8d8e1d037, empty load weight: 2,990 kg, maximum load weight: 15,010 kg, overall weight: 18,000 kg, axle configuration: 2 axles, tire size: 265/70 r19,5, Further information Chassis Changing turntable Fine-grained steel welded construction Front stop, longitudinally adjustable and foldable Pair of removable guide rollers, front and rear 4 container locks with sturdy outriggers on 20-basefor swap bodies 7.15 and 7.45 Turntable with sturdy ball bearing slewing ring Wheel chocks with holder Aluminum side bumper Side collision protection set inwards, for optimum clearance to the swap body supports Steel underride guard Underride guard shortened for optimum clearance to the swap body supports, lighting system mounted in a protected position Quarter-shell mudguards at the front and half-shell mudguards at the rear Trailer drawbar Turntable Drawbar with tested 40 mm drawbar eye Drawbar mechanically adjustable in length by 6 x 100 mm (approx. 1700 - 2300 mm), drawbar length set to 2200 mm Axles + suspension SAF disc brake axles Axle/chassis laser-measured Reduction in tire wear and fuel consumption Air suspension Brake system 2-line compressed air brake systemColor-coded line routing for easy servicing. Air supply 180 liters Spring-loaded parking brake 2 swap-proof coupling heads at the front, with connecting lines to the motor vehicle, EBS made by Wabco, electronic brake system with EBS plug at the front, with connecting cable, Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve, holding function in lowering / lifting position Wheels and tires 265/70 R19.5 tires of the manufacturer's choice Steel rims in twin arrangement, factory silver Electrical system 24 volt, multi-chamber lights in LED with resistor, amber LED lighting at the side, license plate lighting in LED, (Note! with certain towing vehicles, misdiagnosis may occur although the function is given) 2 white front position lights in LED 2 white/red rear lane departure lights in LED 2 x 7-pin interchangeable plugs at the front, with connecting cable, Additional LED work light(s), at the rear on both sides, switched via reversing light LED work lights at the front, centered between the carriers, radiating to the rear, switched via reversing light Country of registration / plates Germany with Dekra approval and certificate (according to §13 EG - FGV) Pedji Ri Rnspfx Ahyegk 24/7 service hotline incl. loading to 2/3 stack, loading racks against deposit Prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear Paint finish Frame DB 7350 nova gray10-year warranty against rusting through Attention: Archive pictures!

Condition: new, machine/vehicle number: eca976917d325d4adc41b69e8, empty load weight: 7,200 kg, maximum load weight: 27,800 kg, overall weight: 35,000 kg, axle configuration: 3 axles, tire size: 385/65 r 22,5, Further information Chassis semitrailer forwarding Fine-grained steel welded construction in lightweight design, fifth wheel plate with replaceable 2 king pins, main frame reinforcement for 25 tons in the centre of gravity on 3 m loading length when pushed together. 13 pairs of hooks for lashing strap attachment welded onto the cross members 23 pairs of lashing eyes embedded in the outer frame, 3.5 tons each Outer frame with Load-Lock profile for lashing strap attachment Please note! Cannot be used with drop sides! 24 t. 2-speed support winch in reinforced design for loaded trailer, single-sided operation, with semicircular lower section and straight connecting plate, with thrust compensation Wheel chocks with holder Aluminum side bumper Underride guard Half-shell mudguards with anti-spray flaps according to EG 1 spare wheel holder for 1 electric wheel, with wheel mounting kit 1 closed stanchion stowage box, open at the top, below loading area, doors on both sides, w=450 mm/H=400/420 mm/t=2460 mm 6 pairs of extendable stanchion pockets, for 80x80 mm tubular stanchions, extendable from loading width 2000 mm to 3100 mm 4 pairs of stanchion pockets embedded in the outer frame, for 80x80 mm shaped tubes 11 stake pockets centrally recessed in the floor, for 80x80 mm shaped tubes, with reinforcement beam, each installed between the outer stake pockets 5 x 3 pairs of stanchion pockets recessed on the outside of the longitudinal beams, for 80x80 mm shaped pipes, including reinforcement beams - for securing loads to the front and rear when transporting 2x5000 mm or 2x 6000 mm construction steel mats 6 lightweight stanchions W=80/ D=80/, usable height approx. 1850 mm, hot-dip galvanized, top with cable guide for belt tensioning 12 lightweight stanchions W=80/ D=80/, usable height approx. 1850 mm, hot-dip galvanized, with lashing eyes welded to the bottom on both sides Note: stanchion pockets / stanchions are not designed for securing long materials, pipes etc. on their own without looping around them 2 plastic toolboxes, with drawer and shelf, w=650 / h=520 / d=670 mm, lockable with a padlock (lock not included) 6 construction steel winches with wire rope and counter hooks, with rope feed-through through the outer frame, 1 removable slip-on gear for construction steel winches - supplied loose (without bracket on the frame) Telescoping Main frame can be telescoped Extendable by max. 4,000 mm and can be arranged approx. every 500 mm Locking with pneumatic bolt locking + display Frame locking on both sides, actuation via hand knob, operation for brake/locking and suspension in FR-left in front of the axles Storage compartment between the side members when extended Axles + suspension SAF disc brake axles with 430 mm disc diameter Last axle self-steering, with automatic reversing lock via reversing light, and additional locking function on the vehicle via hand button, as well as manually via switch in the towing vehicle (pin 10), without truck installation. Offset axle spacing mm Air suspension 1st axle automatic lift axle, can also be operated electrically from the truck, with starting aid, without truck installation (starting aid is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h) Brake system 2-line compressed air brake system Podpfx Ahei Ri Szeyegk Colored cable routing for easy servicing Spring-loaded parking brake 2 swap-proof coupling heads at the front, without connecting line EBS make of the manufacturer's choice, electronic brake syst