Used Fliegl Dhks 390 -25 M³ for sale (77,253)

Condition: new, machine/vehicle number: a3b1347da4aa7f31dceb875db, empty load weight: 2 kg, maximum load weight: 9 kg, overall weight: 11 kg, axle configuration: 2 axles, tire size: 235 / 75 r 17,5, Further information Chassis central axle trailer Welded fine-grained steel construction 6 pairs of lashing eyes bolted to the outside of the floor/outer frame, 5 tons each Front gear support leg Folding rear support 2 wheel chocks with holder Steel underride guard Rear spray flaps across the entire width Quarter-shell mudguards Towing device central axle trailer Towbar with tested 40 mm towing eye Height-adjustable drawbar via spindle, max. adjustment range 300 mm Axles + suspension Iedpfxsi Ri Ils Akxetf BPW drum brake axles Axle/chassis laser-measured Reduction in tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation) Wheels and tires 235 / 75 R 17,5 manufacturer's choice Factory silver steel rims Brake system 2-line compressed air brake system Hand spindle parking brake Integral air reservoir 2 non-interchangeable coupling heads at the front, with connecting cables to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin interchangeable plugs at the front, with connecting cable, Floor Steel/ checker plate floor for high point load capacity Note: Slight floor corrugation possible due to welding distortion! Platform length approx. 5,200 mm Rear sloping to approx. 900 mm Front wall / front corner stanchions 25 mm aluminum hollow profile, 320 mm high, Drop sides 25 mm aluminum hollow profile, 320 mm high, foldable and removable Rear wall / rear corner stanchions 1 pair of steel stanchions attached to the frame and with bracket for locking the drive-on ramps, drive-in width approx. 2,430 mm Drive-on ramps 2 steel ramps 2 300 mm long, 510 mm wide, can be moved sidewayswith grab handle on the ramps covered with wood With gas pressure jack for one-man operation Operating instructions The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of registration / plates Country of registration: Germany with Dekra approval and expert opinion (according to §13 EG - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear Paint finish Frame DB 7350 nova gray10-year warranty against rusting through Front wall aluminum Side wall anodized aluminium Drive-on ramps Hot-dip galvanized Attention: Archive pictures!

Condition: new, machine/vehicle number: f80f2330e1318ef03bc20755e, empty load weight: 3,200 kg, maximum load weight: 35,800 kg, overall weight: 39,000 kg, axle configuration: 3 axles, tire size: 385/65 r22.5, Further information Fine-grained steel welded construction in lightweight design, saddle plate with replaceable 2 kingpins, only 2 longitudinal beams as double T-beams for retrofitting connecting gallows at the front in new/current design, outer frame slightly slanted with load-lock profile for attaching tension beltsNote! to attach the belts in conjunction with drop sides, the drop sides must be opened! 24 t. 2-speed support winch, single-sided operation, with straight lower section, without thrust compensation, wheel chocks with holder, aluminium side bumper, foldable, galvanized steel underride guard, extendable, half-shell mudguards!!! enclosed loose, not mounted!!!, with anti-spray flaps behind each axle, 1 plastic water barrel, capacity approx. 30l, in FR left BPW disc brake axles with 430 mm disc diameter, axle/chassis laser-measured Reduction of tire wear and fuel consumption, air suspension, 1st axle automatic lift axle, can also be lowered manually, can be operated with a hand button on the vehicle 2-line compressed air brake system, with 1 air reservoir central standard, spring-loaded parking brake, 2 interchangeable coupling heads at the front, without connecting cable, EBS, electronic brake system with EBS socket at the front, without connecting cable, EBS 2S/2M, test connection for brake cylinder pressure on the EBS module laid to the outside, Attention: The trailer vehicle may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve, control unit + brake integrated in frame as with tipper semi-trailer, mounted in front of the axles Brake pad wear indicator for disc brakes via ABS/EBS lamp Truck 385/65 R22.5 Continental tires, steel rims, factory silver 24 volt, multi-chamber lights, amber LED lighting at the side as for tipper semi-trailer, dimension 3000 mm must be observed, 2 white LED position lights at the front, loose, 2 white/red lane departure lights at the rear, 2 x 7-pin interchangeable sockets at the front, without connecting cable Germany, test approval according to EC 2007/46 for complete vehicle, 24/7 service hotline, prepared for double license plate holder single-line1 x plastic and 1 x stainless steel interchangeable holder Warning sign according to ECE - 70, aluminum, loose, EBS, safe parking, without contour marking / reflective strips according to ECE R 048, Itjdpei Riwqsfx Akxjf Frame: DB 7350 nova gray, support legs: black coated Available immediately!

Condition: ready for operation (used), Heidenhain UVR 150D ID: 390 421-01 Power Supply Unit SN: 26825548P, professionally completely overhauled and tested with 6 months warranty, 100% functional, scope of delivery as per photos. Note: In the exchange procedure, your defective exchange unit must not have any mechanical damage such as fractures, as these are not repairable. In such cases, a follow-up charge of €1,000 incl. VAT will be applied. Attention: You are bidding on a Heidenhain UVR 150D 390 421-01 SN26825548P inverter in exchange (exchange service), professionally completely overhauled and tested with 6 months warranty, 100% functional, scope of delivery as shown in the photos. In both the repair and exchange process, your defective unit must not display any mechanical damage such as breakage, as these cannot be repaired. If this occurs, a subsequent invoice of €1,000 including VAT will be issued. Isdpfx Akox Etufsxotf

Condition: ready for operation (used), Heidenhain TTR ERM 200 1024 A02 1R division drum Id. 390 925-02 SN:28933090, used, normal signs of wear, 100% functional, scope of delivery as per photos. Itodpfsx Er T Tsx Akxjf

Condition: ready for operation (used), Heidenhain UVR 140D power supply unit Id. 390 281-01 SN:17025144E. The item has been completely overhauled and comes with a 3-month warranty. 390 281-01 is identical to 390 281-51, used, in good condition, 100% fully functional, scope of delivery as per photos. Iodsx Ettnspfx Akxstf

Condition: ready for operation (used), Heidenhain UVR 140D power supply unit Id. 390 281-01 SN:25369259L, the item has been fully refurbished and comes with a 3-month warranty. 390 281-01 is identical to 390 281-51. Used, in good condition, 100% functional, delivery as per photos. Itsdjx Ettuspfx Akxsf

Condition: ready for operation (used), Heidenhain UVR 150D ID: 390 421-01 power supply unit SN: 26825548P, professionally fully overhauled and tested with 3 months warranty, 100% functional, scope of delivery as per photos. Ijdpfx Ajx Ett Ujkxjtf

Condition: new, Heidenhain TTR ERM 2048 A04 1R graduation drum. 390 925-04 SN:27185453, unused, 100% functional, scope of delivery as per photos Ijdei Eazmopfx Akxjtf

Condition: ready for operation (used), Heidenhain TTR ERM 200 1024 A02 IR graduated drum Id. 390 925-02 SN:29636473, used, normal signs of wear, 100% functional, scope of delivery as per photos Itsdex Dwx Nspfx Akxsf

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT23502035606, empty load weight: 5,325 kg, maximum load weight: 26,675 kg, overall weight: 3,200 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,600 mm, loading space volume: 27 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,490 mm, suspension: air, tire size: 385/65 R22.5", color: grey, trailer brake: trailer braked, Year of construction: 2024, The images shown are archive photos; the vehicle may still be in use! Chassis for Tipper Semi-Trailer Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin and two kingpin positions Kingpin installed in the forward position Curved front panel (patented) 24-ton, 2-speed landing gear, single-sided operation, with semi-circular lower section and straight mounting plate, with drawbar equalizer Unhitching under load is not possible; when unhitched, the vehicle must stand with a rearward slope. Free rear swing clearance approx. 2100 mm in the rear position and approx. 2600 mm in the forward position! Wheel chocks with holder Aluminum side underrun protection Foldable rear underrun protection Rear underrun protection with spring assist for easier operation Half-shell fenders Splash guards behind the last axle in asphalt design, hinged on the fender, with hook-up option at the top of the fender, fender shortened Tarp bar with holder Tow hook at the rear (not for Revolution model) Axles & Suspension BPW or SAF drum brake axles, manufacturer’s option Axles in off-road version "Axles/chassis laser measured" to reduce tire wear and fuel consumption Air suspension 1st axle with automatic lift axle, including forced lowering and starting aid, operation via "3x braking" (starting aid functions up to a 30% axle overload and up to a max. speed of 25 km/h) "Hot-dip galvanized lift axle mechanism" 10-year rust-through warranty Braking System 2-line compressed air braking system Color-coded lines for easier servicing. Isdpfxex Dkpnj Akxetf Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line 24 Volt EBS, Electronic Braking System with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by traction vehicles capable of ensuring ABS function! With lift & lower valve Vehicle stability control system Paver brake, electrically controlled from the truck, without truck installation Automatic tipping lowering with shut-off valve Wheels and Tires 385/65 R22.5, manufacturer’s option Steel rims, factory silver Electrics 24 Volt, multi-chamber taillights, yellow LED side marker lights 2 white LED front position lights 2 white/red lane marker lights at the rear 1 x 15-pin socket at the front, without connecting cable 1 LED spotlight with integrated "Osprey" camera as trough camera (technical inspection required upon order) LED strobe light(s) at rear, controlled via switch in the truck, without truck installation, wired to pin 12 Upon order, specify pin allocation! Reversing camera system with color flat-screen monitor, wireless connection to monitor, monitor with suction mount and power supply via 24V vehicle socket Registration/Country & Plates Germany With Dekra approval and certificate (per §13 EC-FGV) 24/7 Service Hotline Body stability to EN 12642 Prepared for single-line license plate holder Conspicuity markings with reflective tape to ECE R 048, white at the side and red at the rear Paintwork Frame: DB 7350 Novagrau "10-year rust-through warranty" Landing legs: Black coated Body/Side panel: Scania Urban Grey 2389173 Sliding tarp: RAL 7038 Agate Grey

Condition: used, functionality: fully functional, Year of construction: 2025, load capacity: 2,500 kg, Fork positioner Load center: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: None Technical condition: New Isdpfew Sp Dbsx Akxstf Description: Brand new fork positioner, frame width 1,150 mm, opening center/center 250 to 1,050 mm, brackets for standard forks, with sideshift valve.

Condition: good (used), Year of construction: 2004, functionality: fully functional, Clamping force: 1250 kN Screw diameter: 35 mm Itsdpfx Akowthfujxof Tie bar spacing: 470 mm Shot weight: 142 g Minimum mould height: 300 mm Total weight: approx. 6,000 kg

Condition: like new (used), functionality: fully functional, machine/vehicle number: WFDFLT33902036561, empty load weight: 5,820 kg, maximum load weight: 29,180 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 04/2025, next inspection (TÜV): 04/2026, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,740 mm, suspension: air, tire size: 385/65 R22.5", color: red, Year of construction: 2025, Chassis Semi Trailer Transport Company Fine-grain steel welded construction in lightweight design, fifth wheel plate with replaceable 2" king pin Outer frame slightly slanted, new version with "Load-Lock profile" for lashing strap attachment 3 pairs of additional lashing rings embedded in the outer frame, each rated at 2.5 t 14 pairs of additional lashing rings embedded in the outer frame, each rated at 2.5 t 24 t two-speed landing gear, single-sided operation, with straight base and travel compensation SAF brand Note: Free landing leg corner dimension or rear swing clearance approx. 1930 mm Pull-out ladder at the rear Door retainer on the side 2 wheel chocks with holders Aluminum side underrun protection Painted in RAL 3002 carmine red No liability/paint warranty for overpainted coated attachments. Steel rear underrun protection, galvanized Painted in RAL 9010 pure white, including rear underrun holders No liability/paint warranty for overpainted coated attachments. Quarter shell mudguards in front of and behind the axle assembly With anti-spray mud flaps per EU regulations Rear impact protection 1 aluminum ladder approx. 2,550 mm, with holder on the side, behind the side underrun protection Insert rail on the outer frame for direct tarpaulin tensioner attachment, bolted version approx. 15–20 mm above the loading surface, upper part with perforated profile for lashing strap attachment, Load Lock outer frame must be usable (no lashing rings). Can be used together with aluminum insert slat at bottom as stop! (not in combination with drop sides) 2 plastic toolboxes, w=800/h=450/d=450 mm 1 each on the left and right of the front frame, behind the 3rd axle Axles & Suspension BPW disc brake axles with 430 mm disc diameter Wheel hubs painted in RAL 3002 carmine red "Axles/chassis laser-aligned" for reduced tire wear and fuel consumption Air suspension Brake system 2-line compressed air brake system Color-coded lines for easy service Spring-loaded parking brake 2 mix-proof coupling heads at the front, without connecting line 24 Volt EBS by Wabco, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be towed by tractors that ensure the effectiveness of the ABS! With raising & lowering valve + auto-reset function Vehicle stability control system Telematics Idem, incl. LIN battery, coupling sensor and tracking (without contract; customer must arrange agreement). Wheels and Tyres 385/65 R22.5" make according to manufacturer’s choice Polished Alcoa Dura-Bright aluminum rims Electrics 24 Volt, multi-chamber lights, side amber LED lighting Lamp carrier painted in RAL 9010 pure white No liability/paint warranty for overpainted coated attachments. 2 white marker lights at the front 2 white/red lane departure lights at the rear Two 7-pin and one 15-pin mix-proof sockets at the front, without connecting cables LED work lights on both sides operated via reverse gear Positioned at level of first crossmember behind landing legs Itedpfxjxbzkke Akxsf 2 additional LED work lights at the rear, operated via reverse gear Tarpaulin Tarpaulin with welded horizontal and vertical straps Customer lettering on rear portal, vehicle currently without tarpaulin

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902017848, empty load weight: 6,537 kg, maximum load weight: 28,463 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 10/2015, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,790 mm, tire size: 385/65 r22.5, color: silver, Year of construction: 2015, Further information Lightweight, fine-grain welded construction, fifth wheel plate with replaceable two kingpins, slightly sloped outer frame with load-lock profile for attaching tensioning straps (Note: To attach the straps in conjunction with side walls, the side walls must be opened). 24-ton, two-speed landing gear, single-sided operation, with a straight base, without thrust compensation, side door stays, wheel chocks with holders, pallet box for 32 Euro pallets (long version), ground clearance approx. 300 mm. Note: Free support leg corner dimension or free rearward swing radius approx. 1930 mm, quarter-shell mudguards in front of and behind the axle assembly, with anti-spray flaps only on the last axle, impact protection at the rear, pallet stops on both sides approx. 20-25 mm high, bolted version, loading height reduced by approx. 20-25 mm BPW disc brake axles with 430 mm disc diameter, air suspension, 1st axle automatic lift axle, including forced lowering and traction assist, actuation of 3 brakes (with traction assist up to max. 25 km/h) Floor: approximately 30 mm thick plywood panels, cross joints with omega inserts, on longitudinal beams for high point load capacity for forklift axle loads up to max. 7100 kg Itedokyrmispfx Akxof Front bulkhead/corner pillars: 2480 mm high, steel corner pillars in volume design, release device for Side tarpaulin on the bulkhead, at a height of approximately 140 mm at the bottom inside, with steel bumper protection. Roof: Sliding roof, rear end lift, can be folded up, with the roof sliding from the rear to the front, L-shaped roof rail for the automotive industry, interior width between the roof rails approximately 2,490 mm, tarpaulin color: white, lifting roof can be raised hydraulically by 400 mm using a hand pump on each corner post. Mobile with the lifting roof raised, adjustable upwards by 4 x 50 mm. Note the total height! Includes tarpaulin extension of 200 mm, only in conjunction with tarpaulin.

Condition: like new (used), functionality: fully functional, machine/vehicle number: WFDFLT33902030059, empty load weight: 7,452 kg, maximum load weight: 27,548 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 05/2023, loading space length: 13,460 mm, loading space width: 2,470 mm, suspension: air, The pictures are archive pictures, the vehicle may still be in use! Itjdpfxjwk Dc Rs Akxsf Equipment on request!

Condition: like new (used), functionality: fully functional, machine/vehicle number: WFDFLT33902029406, empty load weight: 5,800 kg, maximum load weight: 29,200 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 12/2021, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,790 mm, suspension: air, tire size: 385/65 R22.5", color: silver, Year of construction: 2021, The images are archived; the vehicle may still be in use! Semi-trailer chassis for freight forwarding Iedewhp A Depfx Akxstf Fine-grain steel welded construction in lightweight design, fifth wheel plate with replaceable 2" kingpin, coil trough approx. 8,040 mm long, 6 coil supports (coil pockets inside 82 x 52 mm), coil cover with screen-printed panels and steel joists, 2 split-belt covers for coil trough, each approx. 293 mm wide, net weight approx. 13 kg per cover, slightly slanted outer frame with "Load-Lock profile" for tensioning straps. Note: To attach the straps in conjunction with the side walls, the side walls must be opened! 9 pairs of 5-ton lashing eyes recessed in the coil trough area, 24-ton 2-speed landing gear, single-side operation, with straight lower section, without thrust compensation. Note: Free support leg corner dimension or free rearward swing radius approx. 1,930 mm, without supports, extension ladder on the Rear, side door catches, 2 wheel chocks with brackets, aluminum side impact protection, bracket transverse to the side member and attached to the side member for supporting aluminum slats, aluminum underride protection, half-shell fenders with anti-spray flaps according to EC regulations, rear bumper, 1 plastic toolbox, 2 pairs of stake pockets recessed into the outer frame, approx. 72 x 42 mm internal dimensions, at positions 1 and 2 according to the old Fliegl stake data sheet, as per AU 19219, 2 stake pockets recessed centrally in the floor, approx. 72 x 42 mm internal dimensions at positions 1 and 2 according to the old Fliegl stake data sheet, as per AU 192198. Note: Stakes pockets/inserted stakes are not designed for the sole load securing of long materials, pipes, etc. without wrapping. Axles + Suspension SAF disc brake axles with 430 mm disc diameter, "Axle/Chassis" Laser-measured to reduce tire wear and fuel consumption, offset axle spacing 1410/1310 mm (combined transport) up to 44 tonnes gross vehicle weight, air suspension, without lift axle These images are archive images; the vehicle may still be in use!

Condition: used, Year of construction: 2020, FLIEGL SDS350 15 Meter X-TRA LONG STRAIGHT Container Chassis for 2 Swap Bodies or 2 Containers Itodpewtbvtjfx Akxef !EXTRA LONG! !! 14.85 m long!! • Mountings for 2 x 7.45 m swap bodies • or 2 x 20-foot containers • Straight chassis • 3 x SAF air-suspended 8-ton axles • Lift/lower system • ABS • ASR Vehicle dimensions and weights: • Gross weight: 35,000 kg • Unladen weight: 4,100 kg • Dimensions: 14,850 x 2,550 x 1,200 mm • Tyres: 385/55 R22.5 • Tread depth: 13/13/11/12/12/9 mm - Very good condition, hardly used! - Technical Inspection (TÜV / HU / SP): NEW! - SP: 01/26 - German semi-trailer! - 1st owner Errors and prior sale reserved! = More information = Year of manufacture: 2020 Please contact Joannis Arpantzanis or Kai Bühler for further information.

Condition: used, Multicar M25 Year of manufacture: 1986 Itjdpfx Ajv Dwraskxsf -with water tank (water truck body) -with spreader body

Condition: new, maximum load weight: 30,065 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 7,480 mm, loading space width: 2,354 mm, loading space height: 1,460 mm, loading space volume: 25 m³, Year of construction: 2025, Equipment: ABS, Available for purchase, rental, or lease with purchase option upon agreement! Schmitz Cargobull SKI 24 SL 7.2, approx. 25 m³ steel round body tipper with sliding tarpaulin – Also for Rent! ---- * Manufacturer: Schmitz Cargobull * Model: SKI 24 SL 7.2 – Steel round body tipper * First registration: – (NEW VEHICLE) * Colors: Body black RAL 9005, chassis Novagrau 7350, tarpaulin silver * Capacity: Internal body approx. 25 m³ (7.48m long x 2.354m wide x 1.46m high) * Gross vehicle weight: 36,000 kg * Unladen weight as per order confirmation: 5,935 kg * Payload: 30,065 kg * Axles: 3x SCB axles / 1st axle liftable / starting aid / disc brakes * Tyres: 385/65 R 22.5 on Speedline diamond ALLOY WHEELS * Suspension: Air suspension with lift/lower function * EBS * Overhanging pendulum tailgate with 2-hook locking and continuous seal plus additional catches * Floor 5 mm * Side walls 4 mm * Operator platform with access at front left * Hard-chromed hydraulic cylinder * Sliding tarpaulin with central locking * 1x roof bow * Individual mudguards with rear spray flaps * Heavy-duty steel landing legs * Hydraulic hose holder * Paver brake with electro-pneumatic control * Folding underrun protection Iodpfx Akswa Ht Rexstf * Round tail lights * 2x rear LED reversing lights * LED side marker lights linked to indicators * 1x LED rear fog light * 1x towing coupling Available for purchase, rental, or lease with purchase option upon agreement! Note regarding possible errors in the advertisement: Despite careful preparation of this advertisement, occasional errors may occur in the text or specifications. We assume no liability for mistakes, changes, or prior sale. All information is provided without guarantee. Please contact us to verify details or clarify further questions.

Condition: new, empty load weight: 6,020 kg, maximum load weight: 27,980 kg, overall weight: 34,000 kg, axle configuration: 3 axles, loading space volume: 25 m³, suspension: air, tire size: 385/65 R 22,5, tire condition: 100 %, Equipment: ABS, Schwarzmüller K-Series 3-axle steel segment tipper | Volume: approx. 25 m³ | ABS / EBS | 9t SAF axles with disc brakes | Full air suspension | External tailgate | Tyres: 385/65 R 22.5 | Steel round body 7,650mm x 1,470mm | Floor made of 5mm HB 450 | Side walls made of 4mm HB 450 | Front platform | Unladen weight: 6,020 kg | Rolling tarpaulin | Subject to errors, input mistakes, and prior sale. Iedpeywywksfx Akxetf

Condition: new, empty load weight: 6,700 kg, maximum load weight: 25,300 kg, overall weight: 32,000 kg, axle configuration: 2 axles, loading space volume: 25 m³, suspension: air, tire size: 385/65 R 22,5, tire condition: 100 %, Equipment: ABS, Schwarzmüller K-Series 2-Axle Tipper Trailer | Volume: approx. 25 m³ | ABS / EBS | 9t SAF axles with disc brakes | Full air suspension | Tyres: 385/65 R 22.5 | Steel round body | Front platform | Unladen weight: 6,700 kg | Roll tarp Isdpfx Aeywywqekxotf

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 2,208 h, load capacity: 2,500 kg, lifting height: 4,600 mm, free lift: 1,500 mm, fuel type: electric, mast type: triplex, construction height: 2,200 mm, drive type: Elektro, Electric 4-wheel forklift Load centre: 500 mm Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: good Front tyre type: Superelastic Rear tyre type: Superelastic Battery voltage: 80V Battery year: 2019 Description: Sideshift, Iedpeyy Eg Asfx Akxotf 3rd valve, rear work lights, front work lights, road lighting (STVZO), full cab, safety light, LED.

Condition: used, Rotary vane compressor Manufacturer: Becker Type: VT4.25 Voltage: 400V/50Hz Warranty: 12 months Status: Refurbished and new painted Pressure capacity: 25m³/h Ultimate pressure: max. +1 bar (rel) Accessories: Operating instructions Ijdpfx Asb Ii Arekxetf

Condition: good (used), machine/vehicle number: R020344A, operating hours: 953 h, lifting height: 3,050 mm, fork length: 1,200 mm, Unladen weight: 2,070 kg Lifting capacity: 2,000 kg Technical condition: good Ijdjywap Tepfx Akxetf Please contact Vitali Lenda for further information.

Year of construction: 1998, condition: ready for operation (used), General Data Measurements width 2620 mm Measurements depth 4865 mm Machine weight 11700 kg Control Unit Brand OKUMA Model n/a Main Drive Spindle speed range 3500 Tool taper ASA 8 Number of axis 2 Movement X-Axis Movement 230 mm Z-Axis Movement 670 mm Itsdox D R Rfjpfx Akxef Turret Tool taper VDI 40 This 3-axis Okuma LB 25 II-M was manufactured in 1998. A robust horizontal turning machine featuring an Okuma OSP 5020L control, it offers a spindle speed of 3,500 rpm and a 12-position tool turret. It handles a max workable diameter of Ø 420 mm and lengths up to 1,250 mm. Consider the opportunity to buy this Okuma LB 25 II-M horizontal turning machine. Contact us for more information about this machine. Application Types Turning