Used Feed Hopper With Pre-Screening for sale (26,366)

Condition: good (used), Schmedt PraForm HHS 2100 book press with joint forming Perfect condition, purchased from a warehouse, used as a backup. Book press with groove burner. Manufactured by Schmedt, Germany. Fodpfx Ajwud Tkod Ispi Technical data: max format: 400x 520x 100 mm Weight 250 kg Power supply 380 V + compressed air.

Condition: like new (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 68086, Machine can make rolls with paper core. And Coreless rolls (Without cardboard tubes) Semi-Automatic Coreless Prestretch Rewinding Machine Specification • Maximum parent roll diameter 500mm • Maximum web width 600mm. Fpjdpsxpq T Rsfx Ad Isi Master roll core 76mm diameter. 4 roller stretcher train geared to give a stretch of 335% • Servo driven rewind to vary collection tension from 240% to 335%. Adjustable external electronic rewind Variable speed drive up to 450 meters per minute. • Single position coreless rewind station for either 50, 60 or 76mm ID rolls. (with change parts) • Programmable electronic roll length counter. Maximum rewind roll diameter 250mm. Slitting blades for multiple finished roll winding (with change parts) Rolls can be produced with or without oscillation and edge guiding Film break sensor. 3 - phase 400 volt supply. / Air requirements - 4 cfm max. at 80 psi. Guarding to suit current C.E. requirements

Condition: used, Year of construction: 1997, No. 3214 Feed-through veneer press Sergiani LAS Plus Used, year of construction 1997, already dismantled and stored Automatic press with continuous operation for the production of barrier doors, finished doors (veneer doors, HPL, CPL) and pre-treated parquet (2 - 3 layers). The press can be used to load the workpieces one after the other, while the pressure in the other compartments is kept constant. Up to 2 employees are required to operate the line. The multi-daylight press enables a very high production output. The pressing time is approx. 3 minutes (180 seconds) and is spread over 10 levels, which means that the press opens every 18 seconds and a new panel is processed. The press has already been dismantled and stored. The system was in operation until it was dismantled. The previous owner produced 3-layer parquet with the system. The bottom layer was inserted manually. The middle layer consists of one piece. This was glued at the top and bottom and automatically inserted into the system. The top layer was also inserted automatically. Glue spreader / glue applicator not included (optionally available) Stages: 10 Pressing force: approx. 5.5 kg/cm² Total force: 200 tons Panel size: approx. 2500 x 1300 mm LW Heating: Hot water Area of application: Production of doors, laminating, veneer and wood-based material processing High productivity with a capacity of up to 1200 doors per shift (factory specification) Vacuum loading system with 2-lane infeed roller conveyor, without gluing Scissor lift table with loading belt (belt approx. 2900 x 1000 mm LW) Vacuum stacking station with outfeed roller conveyor Space requirement for press with loading table approx. 6500 x 2365 mm LW Space requirement for entire production line approx. 25000 x 5710 mm LW Sale on behalf of customer, ex location near 5020 Salzburg (Austria), without transportation and assembly Loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Fpodpfx Adsv Sthgs Isi Terms of delivery: ex location

Condition: good (used), Year of construction: 2010, SER.AI.PRINT Model: 330 Year of Manufacture: 2010 _____ Technical Specifications • Printing Technology: o 2-colour screen printing o Hot foil stamping o Flat-bed die-cutting • Maximum web width: approx. 330 mm • Printing width: up to 320 mm (depending on tooling) • Substrate range: o Paper o Self-adhesive materials o Films (PP, PE, PET, etc.) Fsdpfx Ajx Hinwjd Ispi • Printing units: o 2 independent screen printing units o Servo-controlled register system • Hot foil unit: o Flat-bed hot foil stamping o Precise foil positioning and pressure control • Die-cutting: o Flat-bed die-cutting station o Suitable for labels and special shapes • Drying system: o Hot-air / IR drying (depending on configuration) • Unwind / Rewind: o Powered unwind and rewind o Adjustable web tension control • Control system: o Central operator panel o User-friendly machine control • Electrical specifications: o 400 V / 50 Hz / 3-phase (European standard) _____ Machine Condition • Well maintained • In good working order • Available for inspection by appointment _____

Condition: good (used), Year of construction: 2014, • Manufacturer: PRISMA s.r.l. • Model / Machine Type: MS-330 • Year of Manufacture: 2014 • CE Certified _____ Technical Specifications General Data • Printing Technology: o Screen printing (flat-bed) o Hot foil stamping o Flat-bed die-cutting Fpjdpfex Hin Rox Ad Ioi • Number of Colours: 4 screen printing units • Maximum Web Width: approx. 330 mm • Maximum Printing Width: approx. 320 mm (depending on screens & tooling) • Substrates: o Self-adhesive paper o Films (PP, PE, PET) o Special materials for industrial & decorative labels _____ Machine Configuration (as installed) Unwind Section • Motorized unwind unit • Adjustable web tension control • Suitable for roll-fed self-adhesive materials _____ Printing Units • 4 independent flat-bed screen printing stations • Precision mechanical register system • Individual print parameter adjustment per unit • Designed for high-opacity inks and special effects _____ Drying System • Intermediate drying between print stations • Hot-air / IR drying (as in line configuration) • Optimized airflow extraction via central exhaust system _____ Hot Foil Stamping • Integrated flat-bed hot foil stamping unit • Precise pressure and dwell-time control • Suitable for decorative and functional foil applications _____ Die-Cutting • Flat-bed die-cutting station • Suitable for complex label shapes and short repeats • Clean cutting performance on paper and filmic substrates _____ Rewind Section • Motorized rewind • Stable roll formation • Suitable for production and finishing rolls _____

Condition: good (used), Year of construction: 2013, functionality: fully functional, power: 5 kW (6.80 HP), Automatic electro-mechanic throughfeed case clamp press with eletronic adjustment of the pressing forces, timing and programable closing sequence of the pressing elements. Manufacturer: SCM Group (division CPC) Model: Action TF2500 Production year: 2013 Machine state: plně funkční Main technical parameters: - max. cabinet dimensions: 2500 x 1250 x 650 mm - min. cabinet dimensions: 250 x 250 x 250 mm - feeding belt speed: 20 m/min - working height: 600 mm Fpodpfezgtg Isx Ad Ioi - length of the infeed conveyor: 2500 mm - length of the outfeed conveyor: 2500 mm - overall power 5kW (15A) Funkcionality: Automatic reading of the cabinet at the infeed including the automatic detection of the central fixed shelf. Programator: - control panel with touchscreen LCD (size 14 cm) - setting of the horizontal thrust (0-1300 kg) - setting of the vertical thrust (0-1300 kg) - selection of the closing sequence (top presser, side presser, top/side presser) - setting of the exact position of the middle side pressers

Condition: used, Colour: Grey Veneer press continuous press gluing press plate press Colombo Machine dimensions: 4500x1300 Oil heated to a maximum of 140 degrees input/outpu t6 cylinders Solid plates 40mm - Details: - └ Description: Osama glue roller is no longer available - Documentation available: No - CE certificate present: No - Press drive: Hydraulic - Max. workpiece length [mm]: 4500 - Max. workpiece width [mm]: 1300 - Max. workpiece height [mm]: 140 - Total stroke [mm]: 140 - Number of stages [pcs]: 1 - Material of press plates: Steel - Number of cylinders [pcs]: 6 - Cylinder diameter [mm]: 120 - Heating boiler present: Yes - Heating type: Oil heated Fpsdjwnhabjpfx Ad Iei - Max. working temperature [°C]: 140 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1986, Colour: Green Price: On request Feed through press Wemhoner VOF2-400-2 Serial number 13350686 Maximum press dimensions 1500x4400mm Maximum stroke 150mm Press pressure 400T 7.5kW, 380V 10 cylinders diameter 120mm Solid plates aluminum 90mm Fsdewng S Aopfx Ad Ijpi Top and heated, oil boiler included. With infeed and outfeed conveyor. Transport dimensions: Full normal trailer 13000x2400x2400mm, total weight 25,000kg. - Year: 1986 - Documentation available: No - CE certificate present: No - Serial number: 13350686 - Main motor power [kW]: 7.5 - Press drive: Hydraulic - Max. workpiece length [mm]: 4400 - Max. workpiece width [mm]: 1500 - Max. workpiece height [mm]: 120 - Total stroke [mm]: 150 - Number of stages [pcs]: 1 - Material of press plates: Steel - Number of cylinders [pcs]: 10 - Cylinder diameter [mm]: 130 - Total working pressure [ton]: 400 - Heating boiler present: Yes - Heating type: Oil heated Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 2003, functionality: fully functional, SOPREM Precision Coil Feeding Line (Decoiler + Straightener) — 2003. Complete matched feeding line for thin precision strip, ready to pair with a small high-speed stamping press. Decoiler — Type H1000.1000ZV. Max coil weight: 1000 kg. Coil Ø: 1000 mm outer / 375–520 mm inner. Reel speed: 2–20 rpm, 1.5 kW drive. Straightener — Type BR 19 . 160 . 12 . U . Strip capacity: up to 0.5 mm thick × 160 mm wide. Hydraulically driven precision straightening unit. Both units built 2003 · 400 V / 50 Hz · synchronized line with E-stop interlink to downstream press · Made in Switzerland. Technical Specifications Decoiler / Coil Reel (Haspel) H1000 / 1000ZV / 10M / LK.LF / N1 / G Serial No. (nameplate): 110103 Max coil weight: 1000 kg Coil outer Ø: max 1000 mm Coil inner Ø: 375–520 mm Fodpfx Aszav H Ssd Iopi Reel speed: 2–20 rpm Motor: KSMV 90L (4), 1.5 kW, 1400 rpm Gearbox: RMI 110 FL LCB, ratio i = 70 Slip clutch: set to 400 Nm Strip sensing: floor contact plate (loop control) Precision Band Straightener (Richtwerk) BR19.160.12.U Function: straightens coil curvature before the press Max strip thickness: 0.5 mm Max strip width: 160 mm Drive: hydraulically driven precision straightening unit Electrical Supply 400 VAC, 50 Hz, 3-phase + neutral + earth Rating: 25 A pre-fuse

Condition: used, total length: 11,500 mm, total width: 2,450 mm, total height: 2,600 mm, Colour: Green Empty weight: 16.500 kg Veneer press Feed-through press HOT Colombo Machine dimensions: 4400x1400 Oil heated input/output is included 8 cylinders Complete with glue roller etc. - Documentation available: No - CE certificate present: No - Press drive: Hydraulic - Max. workpiece length [mm]: 4500 - Max. workpiece width [mm]: 1400 - Max. workpiece height [mm]: 140 - Total stroke [mm]: 140 - Number of stages [pcs]: 1 - Material of press plates: Steel - Number of cylinders [pcs]: 8 - Cylinder diameter [mm]: 85 Fpedpfx Aewnhvvsd Iji - Working pressure [kg/cm²]: 4 - Heating type: Oil heated - Voltage [V]: 400 - Transport dimensions: 11500mm x 2450mm x 2600mm (l x w x h) - Transport weight [kg]: 16500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Year of construction: 2006, condition: excellent (used), functionality: fully functional, KIREMKO BRSET660 | Double screw conveyor with hopper / Vertical conveyor Manufacturer: Kiremko Model / Type: BRSET660 Fsdpfx Adozczqzj Iepi Serial number: 05-1070-AE Year of manufacture: 2006 Power supply: 400 V, 50 Hz, 3 phases Screw diameter: 600 mm Screw pitch: 250 mm Lifting / discharge height: 2800 mm Dimensions: 6800 x 2200 x 4300 mm Professional, high-performance double screw conveyor from the Dutch brand Kiremko – a global leader in the production of processing lines for the potato and vegetable industry. The device is designed for continuous operation in demanding industrial conditions. It is ideal for large fruit and vegetable processing plants (potatoes, root vegetables). The heart of the machine is a powerful, integrated buffer and feed hopper, working with two massive stainless steel screws with an impressive diameter of 600 mm and a pitch of 250 mm. This configuration prevents the material from "jamming," ensures even distribution, and allows for trouble-free transport of materials with varying particle sizes and high viscosity to a height of up to 2800 mm.

Condition: excellent (used), Throughfeed press 3000 mm 14 top cylinders 6 side cylinders Water heating with heating elements in the plate Fpedpfxsx Apxle Ad Iei CE marking Year of manufacture: 1996

Condition: excellent (used), Throughfeed press 3000 mm 14 top cylinders 6 side cylinders Water heating with heating elements in the plate Fpodpfeza Duwsx Ad Ioi CE marking Year of manufacture: 1996

Condition: used, Tool presetting machine GILDEMEISTER-DE VLIEG, type EGS 5045 / Microset DPS 100 Serial No. 83-10-102, Year of manufacture 2002 Travel X-axis: approx. 400 mm Travel Z-axis: approx. 400 mm Tool holder in the mounted rotary table: Ø 50 mm Pitch circle diameter of the tool holders in the mounted rotary table: Ø 340 mm Internal taper in the mounted rotary table: Ø 245 mm Tool holder plate as a rotary table with 8 mounting holes Ø 50 mm Centering diameter of the mounted tool holder plate: Ø 102 mm Rotatably mounted flange with centering diameter: Ø 102 mm Rotatably mounted flange with outer diameter: Ø 155 mm Rotatably mounted flange with 3x M10 mounting holes, pitch circle: Ø 130 mm Mains connection: 230 volts, 50 Hz - Measuring electronics Microset DPS 100 - Rotary table with 8 tool positions - Interfaces: 1x RS232, 2x measuring system (X/Z) - Profile projector with screen Ø 100 mm, magnification 20x and two circle ground glass screens - Ground glass screen fixed with crosshair - Axis movement via manual quick adjustment with pneumatic clamping - Fine adjustment via handwheels Fpedohbal Dopfx Ad Ioi - Rotatable rotary table with pneumatic clamping - Metal base with 3 drawers Footprint L x W x H: 1100 x 1000 x 800 mm Weight: 400 kg Good condition

Condition: used, The device is in working order and ready for use. Feed width: 1500 mm Height: 1000 - 1300 mm Length: 1500 mm Discharge height: 950 mm Belt width: 250 mm Height of scrapers: 10 mm Depth: 900 mm Fjdsy Ua Hmopfx Ad Ijpi Please check my other listings.

Condition: used, Vibratory hopper, dosing hopper, storage bunker, linear vibratory feeder, sorting device Vibratory bowl feeder, spiral feeder / vibratory feeder Vibratory bowl, screw feeding with vibratory feeder for screwdriving technology Feeding system, feed device Manufacturer: MÜLLENDERS Type: MLF-G2 Year of manufacture: approx. 2000 Hopper capacity: approx. 4 liters Vibration frequency: 6000 Hz Control voltage: 24 volts DC (an external power supply is required) Mains connection: 230 volts, 50 Hz - An external 24 VDC power supply is required for the start/stop signals (the controller does not have an internal 24 VDC power unit). - REO control unit, type Reovib RS6 439-459, for adjustable vibration speed Fpedpfx Asy E T Dted Iji - Stainless steel hopper, hopper open to the rear - Base frame made from aluminum profile system Required space L x W x H: 380 x 210 x 700 mm Weight: 20.5 kg Good condition

Year of construction: 2026, condition: new, High precision servo feeder solutions for press lines, punching systems and automated metal forming applications. Bosporas Machinery is a manufacturer of coil processing, press feeding and automation systems, delivering high-performance and customized industrial solutions worldwide with strong R&D capabilities. Our servo feeder systems are designed for accurate, synchronized and repeatable material feeding in press lines, punching operations and automated production systems. Equipped with advanced servo motor technology, the machines provide precise feeding length control, high-speed response and stable production performance. Suitable for both standalone use and complete line integration, Bosporas servo feeders can be customized according to material width, thickness, feeding length and production requirements. Whether for new investments, line upgrades or replacement projects, we provide reliable and efficient feeding solutions for modern manufacturing environments. ⚙️ AVAILABLE SOLUTIONS Standalone Servo Feeders Press Integrated Feeding Systems Coil Line Servo Feeding Units Custom Feeding Automation Solutions 📊 TECHNICAL RANGE Feeding Length: Customized according to production needs Working Width: Customized according to material width Material Thickness: Based on application requirements High feeding accuracy and repeatability Continuous industrial duty operation 🔧 ENGINEERING FEATURES High-performance servo motor driven system Precise feeding length control Fast response and synchronized operation Programmable feeding parameters Multi-job memory capability PLC & HMI control interface User-friendly operation panel Heavy-duty industrial machine structure ⚡ OPERATIONAL ADVANTAGES Improved production accuracy Faster setup and job changeover Reduced material waste Stable and repeatable feeding performance Easy integration with presses and automation lines Short lead time compared to European manufacturers 🏭 APPLICATION AREAS Press feeding lines Punching systems Stamping operations Roll forming pre-feeding systems Automotive suppliers White goods industry General sheet metal processing 🧩 OPTIONAL CONFIGURATIONS Different feeding widths and capacities Custom control software Automation upgrades Press synchronization packages Turnkey integration solutions 📸 REFERENCE PROJECTS Images included in this listing show reference installations of similar servo feeder systems successfully manufactured and commissioned in different countries. These references demonstrate our proven engineering capability and international project experience. Additional references, videos and technical details can be provided upon request. Fsdpoy E Hnrefx Ad Iopi

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, Bruderer roll feed, BBV 202/120, left-hand side, suitable for installation on BSTA 25/250 or BSTA 50/500 presses Feed length 0-120 mm Roller width 120 mm Strip inlet width max. 203 mm Strip thickness max. 6 mm Feed length adjustment motorized. Fully overhauled in 2025. Available for immediate delivery. Also in stock are other feeder models, such as Fpodpfew S Hv Isx Ad Iji BBV 190/85, BBV 195/85, BBV 205/120, BBV 320/200 etc. Please contact us for more information!

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 5500x4000x2250 mm Fpodpev A Hlmjfx Ad Isi Weight 8000 kg Total power requirement 45 kw

Condition: new, Year of construction: 2026, Dimensions (L/W/H) 1400x2450x2800 mm Fodpfoyk H Twsx Ad Iopi Total pressure 400 to weight of the machine ca. 12000 kg

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 8500x1800x2150 mm Fpodpfx Adev A Hkcj Iei Weight 6000 kg Total power requirement 10 kw

Year of construction: 2026, condition: new, Modular compact press feeding solutions including decoiler, straightener feeder and integrated decoiler-straightener systems. Bosporas Machinery is a manufacturer of coil processing, press feeding and roll forming systems, delivering high-performance and customized industrial solutions worldwide. Our compact press feeding systems are designed for efficient coil feeding, material straightening and press automation in a wide range of industrial applications. These systems can be supplied as complete compact lines or as standalone units for modernization and retrofit projects. Whether for new production investments or upgrading existing equipment, we provide flexible solutions including decoilers, servo feeders, straightener feeders and integrated decoiler-straightener machines. ⚙️ AVAILABLE SOLUTIONS Compact Press Feeding Lines Complete systems including: Decoiler Straightening Servo Feeder Press Integration Automation System Standalone Machines: Decoilers Servo Feeders Straightening Servo Feeders Decoiler-Straightener Machines Press Feeding Units 🔧 SERIES OPTIONS The compact systems are available in three performance classes: Fpsdpfxoy Ak Iqo Ad Iei L Series – Low Capacity Solutions M Series – Medium Capacity Solutions H Series – Heavy Duty Solutions Capacity, coil width and configuration are customized according to customer requirements. ⚙️ ENGINEERING FEATURES Compact space-saving design Servo motor controlled feeding systems Accurate feeding and synchronization with press operations Straightening system for improved material flatness Integrated automation system (PLC & HMI) Modular design for future upgrades Retrofit compatibility for existing production lines ⚡ OPERATIONAL ADVANTAGES Complete turnkey press feeding solutions Ideal for new investments and line modernization Reduced downtime and improved productivity Flexible machine combinations Easy installation and operator-friendly use Short lead time compared to European manufacturers 🏭 APPLICATION AREAS Press shops Metal stamping production Roll forming pre-feeding systems Automotive suppliers White goods industry General sheet metal processing 🧩 OPTIONAL CONFIGURATIONS Press included turnkey solutions Custom decoiler capacities Different feeder widths and thickness ranges Automation upgrades Tailor-made engineering solutions 📸 REFERENCE PROJECTS Images included in this listing show different compact press feeding configurations successfully manufactured and commissioned for various countries and industrial applications. Additional references and technical details can be provided upon request.

Condition: used, Single-Column Eccentric Press RASTER ZEULENRODA Type PDA 100 Year of manufacture: 1995 Pressing force: 100 tons Throat depth: approx. 360 mm Table size: 1200 x 710 mm Ram area: 900 x 500 mm Table opening: 400 x 120 mm Stroke adjustment: 6 to 82 mm Ram adjustment: 100 mm Installation height, max. stroke, ram Top Dead Center (TDC): max. 469 mm Installation height, max. stroke, ram Bottom Dead Center (BDC): max. 387 mm Strokes per minute: 50-200 s.p.m. Main drive motor power: 18.5 kW Power supply: 400 Volt, 50 Hz Fpsdpfx Adox U Eiae Ioi - Hydraulically actuated multiple-disc wet clutch and spring-loaded safety brake - Infinitely variable drive via PIV gearbox with inching mode for automatic stroke adjustment and setup operations - Hydraulic overload protection in the ram - Press force and process monitoring via UNIDOR APS - Pneumatic, steplessly adjustable ram weight compensation - Roller feeder MABU WE16, 160 x 3 mm, programmable feed length - Central grease lubrication - Operating manual and documentation for the press Included: Roller feed unit MABU Type WE16 Strip width: 160 mm Strip thickness: max. 3 mm Strip cross-section: max. 300 mm² Roller diameter: 63 mm Strip speed: 40 m/min - Adjacent feeder control MABU Space requirements for eccentric press L x W x H: 270 x 240 x 350 cm Weight of the press: 13.5 tons

Condition: good (used), Centering feed with toothed chain and 2 pressure rollers from above. Hydraulic / Pneumatic. Pressure rollers driven by oil motors. Fsdpfxsnqzuys Ad Iopi Adjustable centering rollers. As infeed for resaw / multirip saw etc.

Condition: new, functionality: fully functional, Year of construction: 2026, CONSTMACH vibrating feeder bunkers are high-efficiency equipment designed to ensure continuous and balanced feeding of crushers in stone crushing and screening plants. These bunkers are placed in front of primary impact crushers or jaw crushers to ensure a homogeneous flow of material. This increases the capacity of the crushers, balances the loads on the intermediate crushers, and ensures continuity in the overall production line. The vibrating feeding system prevents sudden loads, eliminating the risk of overloading on conveyor belts and thermal damage to equipment. Thanks to CONSTMACH's special design, the vibrations in the bunkers are smooth and balanced. This ensures both a steady material flow and extended machine life. Otherwise, uneven feeding could cause serious wear on crusher hammers, conveyor belts, and bearings. Using a vibrating feeder bunker helps reduce maintenance costs, increase operational efficiency, and maintain long-term performance throughout the facility. Fpsdpoxqf Sdefx Ad Iji Vibrating Feeder Bunker Technical Specifications Model: CPG - 09 Body Size: 2,500 x 520 mm Grid Size: 820 mm Motor Power: 2 x 3 kW Bunker Volume: 8 - 10 - 15 m³ Capacity: 80 - 100 t/h Weight: 8,000 kg Model: CPG - 10 Body Size: 3,000 x 850 mm Grating Size: 1,160 mm Motor Power: 2 x 4.5 kW Hopper Capacity: 10 - 15 - 20 m³ Capacity: 150 - 200 t/h Weight: 12,000 kg Model: CPG - 11 Body Dimensions: 4,600 x 1,100 mm Grate Dimensions: 1,400 mm Motor Power: 2 x 9.2 kW Bunker Volume: 15 - 20 - 30 m³ Capacity: 200 - 300 t/h Weight: 18,000 kg Model: CPG - 13 Body Size: 4,880 x 1,370 mm Grating Size: 1,840 mm Motor Power: 2 x 11 kW Bunker Volume: 30 - 45 - 50 m³ Capacity: 350 - 500 t/h Weight: 26,000 kg Why Choose CONSTMACH Vibrating Feeder Bunkers? CONSTMACH is a trusted brand in the industry with years of engineering experience and high production standards. Our products stand out with their durable body structure, low maintenance requirements, and energy-efficient motor systems. Each one undergoes high-quality control processes to ensure long-lasting use. CONSTMACH Vibrating Feeders increase the performance of your crushing plant while minimizing your operating costs. If you are looking for quality, durability, and maximum efficiency, CONSTMACH is the right solution. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.