Used Fatosa Z Arm Mixer for sale (27,937)

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface Nodpfemhhx Iex Ahkjlf - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Nedpfx Aemhhyajhkelf Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone Nlodpfomhh Anex Ahkof - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: Bolted system in hot-dip galvanized design Scope of supply: 4 rack uprights, height 3,500 mm, with base section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms can be adjusted in height in a 100 mm grid - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm distance - Rack length = 4,000 mm - Including fastening material (without floor anchors) Nljdjfdkb Uepfx Ahkof - With assembly instructions and load signs C4 according to DIN standard - Telephone technical advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight services with notification before delivery. The material is packed in a way that facilitates easy unloading. When installed outdoors, the load capacities are reduced by the wind and snow loads. The substrate must be made of concrete, level and suitable for dowels, and must be able to absorb the applied loads. The customer is responsible for checking and ensuring the soil condition and load-bearing capacity, as well as any necessary official permits. The rack uprights must be anchored in the ground on site; anchoring to the wall is not necessary and is not recommended. According to the occupational safety association, it is recommended that the rack uprights have a minimum overhang of 500 mm above the top edge of the upright on the top storage level.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted finish (RAL 7016 anthracite): Scope of delivery: 4 rack uprights, 2.56 m high, with base section, 1.0 m usable depth (1.2 m overall depth) 12 cantilever arms with 1.0 m usable depth Longitudinal and diagonal braces for 4 m rack length (1.3 m spacing) Fastening material (screws, nuts, and washers) (*No paint damage!) Net price for self-collection: €1,490.00 plus VAT. Delivery possible for an extra charge. Nlsdpfjguk A Hox Ahkof Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Rack height 2,560 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Made in Germany - Short delivery time - Self-collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance notification before delivery. The material is packed in a way that allows for easy unloading. The subfloor must be made of concrete, level, and suitable for dowels, and must be able to bear the acting loads. The customer is responsible for checking and ensuring the condition and load-bearing capacity of the floor, as well as any necessary official permits. The rack uprights must be anchored in the floor on site; anchoring to the wall is not necessary and not recommended. According to the occupational health and safety association, it is recommended that the rack uprights have a minimum overhang of 500 mm from the top edge of the upright on the uppermost storage level.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm rack length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized Nsdpfx Ahomhhf Sjkolf - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Screw system in hot-dip galvanized design: Nsdpfx Aomhhl Hohkolf Pick-up price: Sturdy steel construction made of IPE profiles Shelf height 3500 mm Load capacity per upright 2100 kg Foot section 1200 mm usable depth Cantilever arms height-adjustable in 100 mm increments 3 screw-on cantilever arms per upright Usable depth 1200 mm, standard (= 4 levels) Load capacity per cantilever arm 700 kg Including longitudinal and diagonal bracing Including fastening material (without ground anchors) With assembly instructions and load plates C4 according to DIN standard

Condition: like new (used), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth Longitudinal and diagonal struts for 1,300 mm rack axis spacing (4,000 mm rack length) Fastening material (screws, nuts and washers) Nljdpomidyfjfx Ahksf - (*No paint damage!) - (*No damaged components!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 racks in stock) Net price: €1,990.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface painted in RAL 5010 (gentian blue) - Rack height 4,200 mm - Load capacity per stand 2,200 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 730 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery can take place in approx. 1 - 2 weeks after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-compatible and must be able to bear the loads. The customer must check and ensure that the soil condition and load-bearing capacity as well as any official permits that may be required are obtained. The shelf supports must be anchored to the ground on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm from the top edge of the stand.

Condition: like new (used), Year of construction: 2024, Used cantilever racking: bolted system in hot-dip galvanized design Scope of delivery: 4 racking uprights, height 3,000 mm, with base section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered, and expansion is possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Racking height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms can be adjusted in height in a 100 mm grid - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm distance - Racking length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical support - Made in Germany - Short delivery time - Collection on site possible Our cantilever racking is manufactured exclusively in Germany. We offer reliable transport with prior notification before delivery. The material is packed in a way that allows for easy unloading. When installed outdoors, the load-bearing capacities are reduced by the wind and snow load. The ground must be made of concrete, level and suitable for dowels, and must be able to withstand the applied loads. The ground conditions and load-bearing capacity, as well as any necessary official permits, must be checked and ensured by the customer. The racking uprights must be anchored in the ground on site; anchoring to the wall is not necessary and not recommended. According to the occupational health and safety association, it is recommended that the racking uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level. Nedpfsguk Dkox Ahkolf

Condition: like new (used), Year of construction: 2025, Used cantilever rack: Bolted system in hot-dip galvanized finish Njdpfjfdkbhox Ahkolf Scope of delivery: 4 rack uprights, height 3,000 mm, with base section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in a 100 mm grid - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm distance - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable transport with notification before delivery. The material is packed in a way that facilitates easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The base must be made of concrete, level and suitable for dowels, and must be able to withstand the applied loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity, as well as any necessary official permits. The rack uprights must be anchored in the ground on site; anchoring to the wall is not necessary and is not recommended. According to the occupational accident insurance association, it is recommended that the rack uprights have a minimum of 500 mm overhang from the top edge of the upright on the uppermost storage level.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Nsdpfx Ahsmhh Dtokolf Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: Bolted system, hot-dip galvanized Scope of supply: 4 rack uprights, height 2,600 mm, with base section 1,000 mm 12 cantilever arms with a depth of 1,000 mm, standard Including longitudinal and diagonal bracing for a 1,300 mm center distance Incl. fastening material (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered, and expansion is possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with a usable depth of 1,000 mm - Cantilever arms adjustable in height in a 100 mm grid - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for a 1,300 mm distance - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical support - Made in Germany - Short delivery time - Local pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable transport with advance notification before delivery. The material is packed in a way that facilitates easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsoil must be made of concrete, level, and suitable for anchors, and it must be able to absorb the loads acting on it. The customer is responsible for checking and ensuring the ground conditions, load-bearing capacity, and any necessary official approvals. Njdpfoguk Dvsx Ahkolf The rack uprights must be anchored in the ground on-site; anchoring to the wall is not necessary and is not recommended. According to the professional association, it is recommended that the rack uprights have a minimum overhang of 500 mm above the top edge of the upright on the top storage level.

Condition: like new (used), Year of construction: 2002, Parts shown by hand not come Nlodpfx Ahsk It Utskef

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 1 h, functionality: fully functional, machine/vehicle number: N2104796, GEM F470 automatic cardboard box sealer with automatic LATCH LOCKING FOR CONSTANT CARDBOARD FORMAT incl. centering unit and PLC S7 Siemens control system BOX DIMENSIONS: - Length : min. mm. 150 - max. mm .600 - Width : min. mm. 100 - max. mm. 520 - Height : min. mm. 100 - max. mm. 670 TECHNICAL DATA: Nlodjykugxepfx Ahkof - SPS Siemens S71200 control - Centering unit infeed RCC500 - Drive & guide belts Vertical - Carton format setting Manual - Bottom & lid sealing unit - Standard version T22 / T23 - Tape width From 50 to 50 mm depending on the unit - Tension adjustable - Max tape roll diameter 360mm - Core tape roll 76mm - Mains voltage 400V, 3F, N, PE - 50/60 Hertz - Consumption 0.25 kW - Degree of protection IP 54 - Working environment + 5° C - max. +35° C - Transport speed 22 mt/min. - Average production 1200 cartons/hour - Working height 650 mm - Weight 293 kg - Machine dimensions (L x W x H) mm. 2,470 x 990 x 1,782H - CE safety protection: side sheet metal covers with access door, supplemented with infeed doors L 850 mm, top and bottom cover. Illustration may contain options subject to surcharge

Condition: new, Year of construction: 2025, functionality: fully functional, CCT1600L A-M Pressure tester for cylinder head and block – new machine. Hydraulic tray lifting, motorized tray rotation. Technical details: Max. cylinder head capacities: Lenght x Width x Height: 1350 x 425 x 300 mm Capacity of stainless steel tank: 500 liter Heating elements: 2 x 4,5 kw Hydraulic tray lifting Motorized tray rotation Hydraulic hoist: 0,75 kw Gear-motor: 0,25 kw Up and down travel time: 600 mm in 10 sec Thermostat: 0-90°C Power supply: 16kva-3x230v-ac-50/60hz Net weight approx: 600 kg Njdpsncd Ecjfx Ahkelf Space requirements: Lenght x Width x Height: 2100 x 1050 x 1700 mm If you are interested, please contact me! More machines for sale: Berco, Comec, Sunnen, Carmec, Kwik-Way, Serdi, PEG Valve grinder, head and block resurfacer, valve seat milling, pressure tester, parts washer machines

Condition: new, Year of construction: 2024, functionality: fully functional, PTR1600L Carmec Pressure tester for cylinder head and block - new machine Hydraulic tray lifting, motorized tray rotation. Max. cylinder head dimensions: 1350 mm x 300 mm × 395 mm Max. cylinder head weight: 300 kg Adjustable pressure air test: 0 bar -10 bar Adjustable working temperature: 0 - 90°C Stainless steel tank capacity: 540 Liter Heating power: 2× 4,0 kW Hydraulic unit power: 0,75 kW Rotation motor power: 0,18 kW Maximum vertical travel distance: 600 mm Up and down travel time: 10s Rotation speed: 4 RPM Supply voltage: 220-440V 3Ph+E ( +/- 10% ) Frequency: 50-60 Hz Operating voltage: 24 V AC Empty tank: 440 kg Machine dimensions: 2050 mm × 1120 mm × 1650 (max. H) mm If you are interested, please contact me! More machines for sale: Nedpfxsu S Eqns Ahkelf Berco, Comec, A-M, Carmec, Kwik-Way, Serdi, PEG Connecting rod boring, cylinder boring, honing machines, valve seat milling, parts washer, valve grinder, line boring, valve guide press machine, pressure test bench, resurfacer, vacuum tester, valve spring compressor, crankshaft polisher machines

Condition: like new (used), Year of construction: 2022, operating hours: 20 h, functionality: fully functional, machine/vehicle number: 90L1201, Polar Mohr DC-M Punching Machine – As-new condition machine in top shape! Sales price: €69,000 (plus VAT) Ex works: 2325 Himberg near Vienna, Austria Condition: Hardly used – almost as-new Availability: Immediately available Description: For sale is a Polar Mohr DC-M punching machine in excellent condition – barely used and virtually as-new. This machine is ideal for precise punching of labels, tags, and packaging components, excelling in reliability and efficiency in daily production operations. The DC-M is renowned for its user-friendly operation, compact design, and seamless integration into existing production workflows – a true quality product "Made in Germany". Technical highlights: • Precise punching quality with high productivity • Ideal for label production and small formats Nledpowuq Afofx Ahkof • Robust construction for long-term use • Compact footprint – also suited to smaller production areas • Operator-friendly interface Viewing by appointment possible. Sale ex works (EXW) 2325 Himberg near Vienna, transport and loading available on request. 👉 Inquire now and secure an almost new Polar Mohr DC-M at an attractive price!

Condition: excellent (used), Year of construction: 2012, Data: Ibarmia gantry-type machining center (3 axes) XYZ travel: 3050 x 600 x 900 mm Spindle speed: 12,000 rpm Tool magazine: 60 positions, HSK 63 High-pressure coolant: 60 bar Nledeywz H Hjpfx Ahkef Tool measurement: Renishaw Touch probe: Renishaw Coolant system / band filter Chip conveyor

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 750 mm, travel distance Y-axis: 430 mm, travel distance Z-axis: 530 mm, controller manufacturer: FANUC, controller model: Oi MF5, total height: 2,850 mm, total width: 2,600 mm, table width: 420 mm, table length: 750 mm, table load: 400 kg, overall weight: 5,000 kg, spindle speed (max.): 11,000 rpm, spindle motor power: 11,000 W, number of slots in tool magazine: 24, product length (max.): 2,400 mm, number of axes: 4, This 4-axis Z-YANG V7L was manufactured in 2021. It features an X-axis travel of 750 mm, Y-axis travel of 430 mm, and Z-axis travel of 530 mm. The machine is equipped with a FANUC Oi MF5 control system, a powerful 11 kW spindle motor, and an automatic tool changer with 24 tools. If you are looking to get high-quality metalworking capabilities, consider the Z-YANG V7L vertical machining centre we have for sale. Contact us for further details. • Automatic Tool Changer: 24 tools • Rapid Traverse: 48 m/min • Feed Rate: up to 15 m/min Additional equipment • Chip conveyor (included) Technical Specification Nljdezvu S Depfx Ahkef Taper Size BT 40

Condition: reconditioned (used), Year of construction: 1998, coffin saw with drill Eugen Mayer lignum Eugen Mayer 715 column drills used 1998 Mark: eugen Model: Mayer 715 Description: beveller saw with drilling for Eugen Mayer coffins Njdskmgpvjpfx Ahkslf Year: 1998

Condition: good (used), Year of construction: 2013, overall weight: 560 kg, Pump technical data: • Manufacturer: KSB • Type: ETIC D 65 / 45-1 • Capacity: Q = 45 m³/h • Head: H = 182.19 m Nsdpsydv I Dsfx Ahkolf • Year of manufacture: 2013 • Flange connections (visually DN150 – as shown in photos) • Solid, industrial construction • Pump dismantled from an industrial installation Electric motor: • Manufacturer: Siemens • Power: 37 kW • Supply: 3-phase • Speed: approx. 2950 rpm (50 Hz) • Industrial design, IC411 cooling • Mounting: IM B3 • Motor mounted on frame together with pump Condition: • Technical condition: used • Visually normal signs of use, no cracks or damage to the housing • Shafts and flanges complete (visible in the photos) • Sold as a set: pump + motor + frame Additional information: • Ideal for industrial applications: process installations, energy, chemical, process water • Price quoted per unit.

Condition: good (used), Year of construction: 2008, operating hours: 4,375 h, empty load weight: 10,764 kg, fuel type: diesel, JLG 600AJ Articulated Boom Lift / Working Platform, 20.46m Working Height, Deutz Diesel Engine, 2008 A video can be sent via WhatsApp. We have a continuous supply; see our website. Prices are quoted ex Nuland. Van de Wert Trading B.V. has a varying stock of machinery, trucks, trailers, and attachments. All our deliveries are at trade prices in AS-IS condition without guarantees (see our general terms and conditions). Njdpfxjzwgxxs Ahkjlf You can make a non-binding appointment for a viewing and/or test drive. Please call beforehand, as we are not always present. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: used, functionality: fully functional, Oil mist extraction for CNC machines, Agfa / ABSOLENT separator filter Fan power: 0.63 kW Inlet diameter: 160 mm Capacity up to 500 m3/h New main filter cartridge The Agfa / Absolent filter is one of the most efficient oil mist and oil fume filters in the world. Nlsdozva Tmepfx Ahksf It has very low maintenance requirements and can operate for several years without filter replacement, resulting in very low operating costs. Due to its design and large filter surface area, it offers both a long service life and consistently high separation efficiency. Thanks to its design, the filter can operate continuously and without interruption. The liquid collects at the bottom of the filter and can be reused.

Condition: excellent (used), For sale: an industrial KSB centrifugal pump, model EB 32-160, equipped with a 4 kW electric motor. Pump specifications: • Manufacturer: KSB – Klein, Schanzlin & Becker AG • Type/Model: EB 32-160 • Pump number: 0-118-886 021 Nedpfxezvat To Ahkelf Motor specifications: • Motor number: 3358128-021 • Motor type: AF 112M/2A-11 • Power: 4 kW • Voltage: 380 V • Rotational speed: 2870 rpm • Current: 8.1 A • Frequency: 50 Hz • Protection class: IP54 • cos φ: 0.89 The pump and motor were likely refurbished and inspected by a specialized service in 2024, as indicated by the stickers from Elektromotoren Reparaturwerk ROCK and the 2024 inspection marking. The pump has been inspected by us and is in working order. Used condition. The exact condition of the unit is shown in the photos.

Year of construction: 2018, condition: excellent (used), functionality: fully functional, machine/vehicle number: 125102018, Manufacturer: TMA Automation sp. z o.o., Year of production: 2018 SET DESCRIPTION For sale is a complete set of two cooperating Cartesian robots manufactured by the Polish company TMA Automation, designed for use with injection molding machines. The set consists of a MIDI LINE linear robot and a UNI LINE in-mold labeling (IML) module. The robots were used in a production facility and are in a condition confirmed by technical documentation. The sale includes complete documentation. TECHNICAL DATA MIDI LINE robot (serial number: 125102018) Dimensions (L x W x H) 2400 x 2060 x 1435 mm (variable height), Weight 600 kg, Payload 8 kg, Z-axis reach 2300 mm, Y-axis reach 1400 mm, X-axis reach 1400 mm, Supply voltage 400 V / 50 Hz, Power 4.5 kW, Operating air pressure 6.5 bar UNI LINE robot with IML module (serial number: 126102018) Dimensions (L x W x H) 2540 x 1000 (1370) x 2090 mm, Weight 550 kg, Payload 8 kg, Stacker reach 1100 mm, Supply voltage 400 V / 50 Hz, Power 1.5 kW, Operating air pressure 6.5 bar EQUIPMENT INCLUDED Touchscreen control panel with a safety STOP button (e-stop), control software with the following functions: automatic mode, manual mode, no-label mode, no-part removal mode, program archive, graph and alarm module; complete technical documentation, CE marking on both machines. TECHNICAL CONDITION Robots from 2018, operated in industrial conditions (plastics injection molding). Control panel active; at the time of the photographs, program PRG 2 was selected, operating speeds: manual 22%, automatic 17%. The photographs show a red robot stop signal (standby condition, not an emergency). Recommended before purchase: personal inspection and test run at the installation site. Nledpfxezwdx No Ahkef SALES CONDITIONS Sold only as a set. Self-collection only. Transportation is the buyer's responsibility.