Used Ets Solutions Mpa102/L620M for sale (5,828)

Condition: excellent (used), Year of construction: 2022, operating hours: 7,800 h, functionality: fully functional, machine/vehicle number: Puma 2600, turning diameter over cross slide: 630 mm, turning length: 1,245 mm, turning diameter: 376 mm, spindle bore: 102 mm, spindle speed (max.): 2,800 rpm, spindle motor power: 26 W, type of input current: three-phase, controller manufacturer: FANUC, number of spindles: 2, operating hours of spindle: 7,800 h, number of slots in tool magazine: 12, Equipment: chip conveyor, For sale: Turning center with sub-spindle and Y-axis. Machine in perfect condition. Purchased new in mid-2023. Currently in operation, with less than 8,000 operating hours; parts produced well below its technical capacity. Serviced exclusively by an authorized distributor. Adapted for robot operation: equipped with autodoor and external communication signals. Features include parts conveyor and oil mist filter. NOTE: The robot is not included in this offer – separate sale and integration support can be offered upon individual quotation. TECHNICAL DATA according to manufacturer’s specification: 1) Capacity Swing over bed: 680 mm Swing over cross slide: 630 mm Max. turning diameter: 376 mm Recommended turning diameter: 315 mm Max. turning length: 1245 mm Max. workpiece weight (incl. chuck): In chuck: 500 kg (with support: 1000 kg) Bar capacity in spindle: 102 mm 2) Main Spindle Chuck: 315 mm Spindle nose: A2#11 ASA Front spindle bearing diameter: 160 mm Spindle bore: 115 mm Chuck through hole: 103 mm Spindle motor power (S3-25%/S6-60%/S1 Continuous): 26/22/18.5 kW Spindle speed range: 2 - 800 rpm Max. spindle torque (S3-15%): 1123 Nm Power transmission: Belt 3) Sub-Spindle Chuck: 175 mm (optionally 210 mm) Spindle nose: A2#5 ASA Spindle bore (diameter): 62 mm Sub-spindle cylinder bore: 50 mm (H8) Spindle motor power (continuous/30 min): 7.5/5.5 kW Sub-spindle speed range: 4,500 rpm Max. spindle torque (30 min): 85 Nm Power transmission: Belt 4) Axis Travel X axis: 260 mm Z axis: 1350 mm Y axis: 105 (±52.5) mm B axis: 1350 mm C axis (1, 2): 360° (0.001° increments) Rapid traverse: X axis: 30 m/min Bljdpfx Amex Rqkujyjk Z axis: 30 m/min Y axis: 10 m/min B axis: 30 m/min C axis: 200 rpm 5) Bed and Saddle Slant bed, tilt angle: 30° Bed guideway (Z axis): 437 mm Saddle (X/Y axis): 321/325 mm Sub-spindle stroke: 335 mm 6) Tooling System Tool holders: BMT 65P Number of tools: 12 Tool size: 25 x 25 mm Max. drill diameter: 50/32 mm (main/sub-spindle) Driven tool motor power (5 min/Cont): 7.5/1.5 kW Driven tool speed: 5,000 rpm Driven tool max. torque: 95.5 Nm Driven tool collets (ER32): Φ3–Φ20mm (option) Turret indexing time: Single position: 0.15 s (1.2 s full station) Max. driven tool drilling diameter: φ20 mm, M20 x P2.5 7) Hydraulic System Tank capacity: 20 l Flow rate (60/50 Hz): 25 / 20.8 l/min Power/Pressure: 2.2 kW x 5.0 MPa 8) Coolant Tank capacity: 250 l Flow rate: 30 l/min Power/Pressure: 0.7 kW x 0.15/0.1 MPa (60/50 Hz) 9) Machine Accuracy Positioning: 0.01 mm Repeatability: 0.02 mm C Axis Positioning: 0.0167° Linear repeatability (axes X/Z/Y): ±0.002/±0.003/±0.003 mm C Axis repeatability: ±0.006° 10) Control System Full electric control for X, Y, Z, C axes For further questions or additional information, please feel free to contact us by message or phone.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, total width: 120 mm, total length: 220 mm, total height: 245 mm, usable tank capacity: 3,300 l, Safe compliant with Valrem. Fire resistance > 120 minutes External dimensions: Bjdjykapfopfx Amyelk Length: 220 cm Width: 120 cm Height: 245 cm Internal dimensions: Length: 170 cm Width: 95 cm Height: 210 cm

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, turning length: 300 mm, turning diameter: 300 mm, spindle bore: 52 mm, spindle speed (max.): 4,500 rpm, controller model: FANUC CNC, TECHNICAL DETAILS Max. turning diameter: 300 mm Max. turning length: 300 mm Spindle bore: 52 mm Main spindle speed: 4,500 rpm Tool turret: 12 stations MACHINE DETAILS Machine weight: 2,200 kg EQUIPMENT Horizontal CNC lathe High-performance main spindle Robust machine construction for high dimensional accuracy Tool turret with fast indexing Compact design with a small footprint User-friendly CNC control Bsdpfx Aeyvfvuomyslk High reliability and low maintenance Control: FANUC CNC

Condition: ready for operation (used), Year of construction: 2023, spindle motor power: 22,000 W, spindle speed (max.): 3,000 rpm, travel distance X-axis: 293 mm, travel distance Y-axis: 130 mm, travel distance Z-axis: 1,350 mm, total height: 2,315 mm, total width: 2,067 mm, overall weight: 8,000 kg, controller manufacturer: FANUC, controller model: 0i-F, product length (max.): 4,530 mm, number of axes: 4, This 4-axis DN SOLUTIONS 3100 LY turn-mill centre was manufactured in 2023. It features a maximum turning diameter of 420 mm and a turning length of 1285 mm. The machine is equipped with a 12-inch main spindle chuck and a rapid traverse speed of 30 m/min in both X and Y axes. If you are looking to get high-quality turning capabilities, consider the DN SOLUTIONS 3100 LY machine we have for sale. Contact us for further details. • Main spindle chuck size: 12 in (306 mm) • Bar capacity: 102 mm • Rapid traverse: X 30 m/min; Y 30 m/min; Z 10 m/min • Max turning diameter: 420 mm • Max turning length: 1285 mm • Driven tool speed: 5000 rpm • Tooling: 12 stations, BMT65 • Guideway type: Box guideways • Axes/features: C-axis, Y-axis • Electrical: 380 V, 3-phase, 50/60 Hz • Electrical ratings: 55.02 kVA; Full load current 83.60 A; Short circuit capacity 10 kA; Interrupting capacity 5 kA Additional equipment • Optional: • 1 pc. External turning tool post BMT65 25x25 single left, right (500-0679) • 3 pcs. External turning tool post R/L high (500-6960) • 1 pc. Facing tool post BMT65P/SQ 25 mm (500-0834) • 3 pcs. Boring bar holders (ID: 50 mm) BMT65P (500-5555) • 1 pc. IK cover (500-0837) • 1 pc. Reducing sleeve set • 1 pc. Reducing sleeve set (500-0808) • 1 pc. Adapter set PRECI-FLEX Er32 (BMT 65P) (500-0500) • 12 pcs. Covers BMT 65 (500-1931) • 2 angled externally cooled Eppinger AGWs • 2 straight externally cooled Eppinger AGWs • Chip conveyor (hinge belt conveyor). Price on request • Machine is delivered with standard basic package: Turret fully equipped, base holder includedMachine is a Showroom machine that never has been in production. Like new Bljdpfxsyu Rn Te Amysk Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), functionality: fully functional, input voltage: 400 V, total length: 13,000 mm, total width: 5,650 mm, total height: 3,300 mm, input current: 10 A, input frequency: 50 Hz, Industrial Spiral Bread Cooler An industrial spiral bread cooler is available, suitable for bakeries and production lines. The machine was in operation until recently and has been dismantled due to replacement with new equipment. The spiral has a total length of approximately 420 meters and ensures uniform cooling of the products. The dwell time for a complete cycle is approximately 94 minutes, enabling an efficient cooling process after baking. The system has a throughput of around 2,500 loaves per hour and can simultaneously accommodate up to 4,000 loaves with a total weight of approximately 2,566 kg. Bedpoy Au Injfx Amyjlk The design allows for configuration as a single or dual spiral (figure-eight type), depending on production requirements. It is suitable for integration into existing bread and bakery product lines. Main specifications: - Outer diameter: approx. 5.65 m (per loop) - Height: approx. 3.30 m - Required floor space: approx. 12–13 m in length (depending on configuration) - Power supply: 400V AC / 24V DC - Rated current: 10 A Manufacturer: QUBA 3 s.r.l. (Italy), line by MEFOOD Solutions Model: QC020118 The machine is sold dismantled. All components are available. It was fully operational until dismantling and is in good technical condition. On-site inspection is possible by appointment. Additional information can be provided upon request.

Condition: like new (used), Year of construction: 2026, operating hours: 50 h, functionality: fully functional, turning length: 330 mm, turning diameter: 350 mm, spindle speed (max.): 6,000 rpm, travel distance Z-axis: 330 mm, spindle motor power: 15,000 W, rotational speed (max.): 6,000 rpm, overall weight: 3,200 kg, swing diameter over bed slide: 600 mm, bar passage: 65 mm, bar diameter (max.): 65 mm, We are offering this as-new DN Solutions Lynx 2100 CNC lathe Lynx 2100 GT2100 GT2600, year of manufacture 2026. Listing Title: DN Solutions (Doosan) Lynx 2100 – As-new condition (only 50 operating hours!) Description: We are offering a DN Solutions (Doosan) Lynx 2100 CNC lathe in as-new condition. The machine was purchased for a specific project and has seen minimal use. It is currently in showroom-like condition with less than 50 operating hours. Bsdpfx Amsyzbdgsyslk Condition: As-new, no signs of wear, fully functional Availability: Immediately available Key advantage: Avoid long delivery times and secure a machine in new-machine quality right away. Technical Data: Control: Fanuc i-Series Swing diameter over bed: 600 mm Maximum turning diameter: 350 mm Maximum turning length: 330 mm Bar capacity: 51 mm / 65 mm Spindle speed: 6,000 rpm Number of tool stations: 12 Main drive power: 15 kW Machine weight: approx. 3,200 kg If you have any questions or need further information, feel free to send us a message or call us.

Condition: good (used), functionality: fully functional, Vertical bag packing, filling and sealing machine Bodpfx Amsv Utd Hjyslk Brand Jasa Packaging Solutions B.V. Model PMT Horizontal seal length 270 mm Material width 620 mm Overall dimensions: 2800 mm x 1450 mm x 2350 mm.

Condition: like new (used), Year of construction: 2024, sheet thickness (max.): 110 mm, total length: 4,370 mm, total width: 2,205 mm, total height: 2,320 mm, overall weight: 6,150 kg, input voltage: 400 V, workpiece height (max.): 110 mm, input frequency: 50 Hz, power: 30 kW (40.79 HP), workpiece width (max.): 1,200 mm, input current: 59 A, This SER1200 Multibrush VAC is on display in our showroom and has only been used for a few demonstrations. You can still view this machine in our showroom in Bergeijk. Discover the innovatively developed SER1200 Multibrush finishing machine, designed with 4 processing stations and 17 individually controlled motors. The entire finishing machine can be operated via the HMI touchscreen, which is highly intuitive and ensures effortless operation. The display makes it easy to select different finishing programs, leading to high reproducibility of product quality and preventing operator setup errors. Thanks to the automatic height adjustment at the processing stations, consistency and precision are always ensured. At the first station of the finishing machine, burrs and irregularities are removed by a grinding unit, resulting in a flat, burr-free surface. After grinding, four oscillating combination brushes apply gentle pressure to the product, ensuring that all edges and holes of the flat-ground product are rounded, both around and inside. As the final processing step, the Multibrush round brushes provide perfect post-processing. The six brushes deliver a non-directional finish and round off the edges with a radius of 2+ mm, giving the product a high-quality and durable appearance. The SER1200 Multibrush finishing machine is also available in an XL version, featuring an additional fifth station. The fifth station consists of a second grinding unit, enabling a line finish on your product using a finer grinding belt or Scotch-Brite belt. Bljdpsyt Nm Esfx Amysk The SER finishing machine utilizes a unique brush combination, exclusive to Q-Fin and marketed as: “The Ultimate Qombination”. This setup achieves a 2+ mm radius in a single pass. The SER1200 offers full ERP control and seamless integration into automated production processes — in short, a finishing machine that is ready for the future!

Condition: good (used), Year of construction: 2016, This F200XL-VAC is used but has been inspected and is in exceptionally good condition. The F200 XL is a 3-station machine and is standard equipped with the brush height tracking system developed by Q-Fin. In combination with the user-friendly button system, this ensures that both the setup and operation of the F200 are intuitive, resulting in the most operator-friendly machine available on the market. The machine features steplessly adjustable speeds for both the conveyor and the brush(es) and/or grinding head(s) as standard, making all manner of processes and finishing results achievable. You determine the desired finish yourself. Blodpfoyt Nhvsx Amysk The F200 XL can be equipped, as desired, with either a vacuum system (for non-ferrous metals, such as stainless steel and aluminium) or a magnet system (for ferrous metals). These systems ensure effective fixation of the workpieces on the conveyor table, allowing even small parts (from 10x10 mm) to be processed safely, effortlessly, and quickly. For good reason, we at Q-Fin advocate a narrow machine for small workpieces and a wider machine for larger ones. In many cases, the throughput speed of this machine is up to 5 times higher than comparable machines. You can view this machine in our showroom in Bergeijk.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: DSPL-2025-Q2-01, overall weight: 150 kg, input voltage: 400 V, input current: 10 A, type of input current: AC, warranty duration: 12 months, total length: 1,560 mm, total width: 780 mm, total height: 950 mm, input frequency: 50 Hz, protection type (IP code): IP20, year of last overhaul: 2025, Integrated Pick-and-Place System for Industrial Assembly Applications The DS Place was developed to reduce the high integration effort typically associated with conventional pick-and-place solutions. In many projects, the robot, feeding system, vision system and control unit are sourced separately and then integrated via multiple interfaces. This often results in increased coordination effort and extended commissioning times. The DS Place is designed as a fully coordinated, integrated system. System components: SCARA robot Camera-based part detection (vision system) Automatic feeding via material hopper and pick belt Integrated PLC control system Functionality: Parts are automatically fed from the material hopper onto the pick belt, detected by the camera system, and then precisely transferred by the robot onto a discharge conveyor or into a downstream process. Technical features: Throughput: up to approx. 1,200 parts per hour Suitable for metal, rubber, wood and plastic parts Maximum part length: approx. 30–35 mm Gentle handling Interfaces: TCP/IP, optional PN/PN coupler, 24 V I/O Commissioning: position the system, teach the drop-off location, start operation Typical applications: Automatic assembly Sorting and transferring of small parts Bedpfxow Rm Hwo Amyelk Integration into existing production lines Manufacturer: DS auto-solutions Year of manufacture: 2025 Condition: New

Condition: used, Year of construction: 2019, Manufacturer : Novexx Solutions Model TE 204 Year : 2019 Type : Tamper-evident labeller Type of products handled : Carton   Labelling head : ALS204 Dispensing speed : max. 40 m/min Label width: 10 -110 mm Label length: 5 to 600 mm   Bljdpsygndijfx Amyok Supply voltage: 220V Motor power: 2.5 kW Technical documentation Dimensions : 2363 x 1455 x 1420 mm  

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: MST-0800C0028, For sale: automatic plastic injection molding machine ATEC HQ-800QL. Year of manufacture – 2005 (04), Serial No. MST-0800C0028. Hydraulic system with digital control panel, suitable for serial production of plastic parts. Power supply 380 V, 50 Hz, 3 phases. Used, fully equipped, previously operated in production. Suitable for manufacturing technical, packaging, and industrial plastic components. Inspection on site possible. Bodpfx Ajx Nhy Rjmyslk

Condition: excellent (used), Year of construction: 2003, A Weland Compact Lift 2440 is now available for sale. The machine has been kept in a clean, well-maintained environment and receives annual servicing, making it reliable for many years to come. It has completed approximately 50,000 cycles so far. Typical usage is around 10,000 to 20,000 cycles per year, so this machine has seen light use. The lift is 6,000 mm high, but the height can be adjusted as needed. It is a Vertical Lift Module (VLM) that works well in warehouses with changing storage demands and can be shortened if required. Blsdpfxjxpuyuj Amyok The VLM is equipped with 25 trays, making it ideal for storing taller items. Additional trays are available from Relevator if needed. Manufacturer: Weland Solutions Year of Manufacture: 2003 Model: Weland Compact Lift 2440 Height: 6,000 mm (adjustable) Width: 2,950 mm (lift) / 2,440 mm (tray) Depth: 2,950 mm (lift) / 820 mm (tray) Number of Trays: Approx. 25 per lift Maximum Load per Tray: 400 kg Electrical: 400V, 25A

Condition: like new (used), Year of construction: 2018, 4th Generation of The XXL system by Imaging Solutions 5-in-1 solution. A LayFlat book block producing from sheets in just one working step. One push of a button triggers all of the necessary individual steps: cutting, creasing, folding, pressing, and gluing. LayFlat book blocks are produced with minimum manpower requirements, and same-day finishing and shipping is possible. Specifications: 2300 sheets per hour XL format book blocks up to 370 mm x 457 mm (14.5” x 18”) Bedpon Ut D Nefx Amyelk High-level performance: up to 250 book blocks/h Barcode controlled product selection: Different page lengths and book configuration (inlays) within one roll possible thus reducing time for batching Optional inlay feeder with a stacking height of 220 mm (8.66”) Unlimited number of inlays can be glued between two pages Active adjustment of gluing head for precise and homogeneous glue application Optional in-line book press for perfect book spines Easy to operate via touchscreen 5-in-1 fully automatic print finishing system Cutting, creasing, folding, pressing and gluing in only one workstep Complete LayFlat book blocks manufactured from sheets Integratable into barcode-controlled workflows (e.g. inline with 3-knife-trimmer) Provides consistent premium quality with low production costs Premium LayFlat photo book technology for panoramic pages Processes original photo paper and digital press paper.

Year of construction: 2012, condition: excellent (used), easyFrame is a semi-automated solution for canvas framing, by Imaging Solutions AG. It can process to 50 frames per hour (depending on the operator). Machine is exellent state. It has frame mounts to produce stretchers from 8x6 to 43x43 inches canvases. Bljdpjn Ut Hcjfx Amyek

Condition: new, Year of construction: 2025, functionality: fully functional, This UV printer replaces conventional laser printers – it also prints in color on glass, wood, textiles, plastic, metal, and many other materials. New model: PS-UV4060 Max Volume For large objects with a high clearance height. Print head: Epson TX800 (CMYK + WW / 6 channels) 720x1080 / 720x1440 / 720x2160 dpi Includes software for printer control and image editing. Weight: 90 kg Control display Table movement via screw mechanism 360-degree operation available upon request: for large, round bottles or other objects A2 size 45x65cm and 40cm printing height Printer dimensions: 107x106x102cm Water circulation cooling system Bedpfsfvx U Hjx Amyslk Software settings and printer explanations are available upon request. Available throughout Germany and Europe.

Condition: new, Year of construction: 2025, functionality: fully functional, This UV printer replaces conventional laser printers – it also prints in color on glass, wood, textiles, plastics, metal, and many other materials. New model: PS-UV4060 Max Pro Double-head machine: 2x CMYK + 4x white A speed demon! Print head: 2x Epson TX800 (CMYK + CMYK + WWWW / 12 channels) 720x1080 / 720x1440 / 720x2160 dpi Blodpfx Amefvx U Ueyjk Includes software for printer control and image editing. Weight: 95 kg Control display Table movement via screw mechanism 360-degree operation available on request: for large, round bottles and objects A2 size: 45x65 cm and 20 cm printing height Printer dimensions: 920x940x570 mm Water circulation cooling system Software settings and printer explanations available upon request, throughout Germany and Europe.

Condition: good (used), functionality: fully functional, Year of construction: 2002, • 4 new EDI cells MK3 are available. • 7 EDI stations, each with 4 EDI cells MK3, will be dismantled. Blodpfxewy Uu Ao Amyek

Condition: new, Year of construction: 2025, functionality: fully functional, This UV printer replaces conventional laser printers – it also enables color printing on glass, wood, textiles, plastics, metal, and many other materials. New model: PS-UV4060 Max Print head: Epson TX800 Maximum resolution: 2690 dpi Includes software for printer control and image editing Weight: 90 kg Control display Table movement via screw mechanism 360-degree operation available upon request: for bottles and round objects A2 size (45x65 cm) and a printing height of 20 cm are possible Software settings and printer instructions are available upon request. Available throughout Germany/Europe. Bodpfx Amefbmgfeyolk

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 60919029293, This UV printer replaces conventional laser printers, enabling color printing on glass, wood, textiles, plastics, metal, and many other materials. New model: PS1812 Blodpfega U Tdsx Amyek C M Y K LC LM + White + Varnish, or with double CMYK + WWWW (White) + VVVV (Varnish) Print head: Epson TX800 2690 dpi max. Includes software for printer control and image editing. Dimensions: approx. 260cm (L) x 160cm (W) Weight: 750kg Printing area: 1800x1200 mm, with a printing height of 150mm.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, total length: 2,150 mm, total width: 1,805 mm, total height: 2,320 mm, overall weight: 2,850 kg, input voltage: 400 V, input frequency: 50 Hz, power: 16 kW (21.75 HP), input current: 32 A, This machine is as good as new, has only been displayed in the showroom and has been used as a demo model. F800 – All-round finishing machine Discover the advanced F800 finishing machine, equipped with an intuitive HMI touchscreen for effortless operation. This screen allows operators to easily switch between various finishing programmes, ensuring high reproducibility of product quality and minimising operating errors. Depending on the materials to be processed, you can choose a system with vacuum or magnetic support. Bodpfxsx Uz Ile Amyelk On the input side, burrs and irregularities are removed by a grinding unit, resulting in a smooth and burr-free surface. This is followed by four oscillating cup brushes that exert light pressure. The brushes ensure uniform rounding of all edges and holes, both around and inside the flat-ground product, resulting in the most optimal finish. The F800 offers automatic brush calibration options that ensure consistent precision, as well as full ERP control and seamless integration into automated production environments. In short, it is a finishing machine that is fully prepared for the future!

Condition: excellent (used), Year of construction: 2010, Converging Solutions Converging Conveyor Model: Integrator 3 Syncro Serial number: CS5653 Year of construction: 2010 230 V, 16 A Belt width: 680 mm and (6x) 320 mm Blsdpfjv Tx Uzox Amyok Clearance: 680 mm x 190 mm Total dimensions: 2280 mm x 850 mm x 1240 mm.

Condition: new, Year of construction: 2025, functionality: fully functional, This UV printer replaces conventional laser printers – it also enables color printing on glass, wood, textiles, plastic, metal, and many other materials. New model: PS10157V CMYK, LC, LM + white + varnish option included Print head: Epson TX800 2690 dpi max. Includes software for printer control and image editing Dimensions: 2.30 x 1.98 x 1.34 m Bodpfx Asd Hydhemyjlk Weight: 650 kg 360-degree printing: bottles/round objects (additional cost) A1+ size 100x150 cm and 170 mm printing height 8 x 500 ml ink can be supplied! (additional cost) + VARNISH FUNCTION included Software settings and printer explanation available on request. Available throughout Germany/Europe. (additional cost) Printing videos, etc. can be sent by email/WhatsApp upon request.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 60919029293, This UV printer replaces conventional laser printers – it can also print in color on glass, wood, textiles, plastic, metal, and many other materials. New model: PS1612 C M Y K LC LM + White + Varnish or with double CMYK + WWWW (White) + VVVV (Varnish) Print head: Epson TX800 2690 dpi max. Includes software for printer control and image editing. Bsdpfx Aoga U Tajmyjlk Dimensions: approx. 240cm (L) x 160cm (W) Weight: 650kg Print area: 1600x1200 mm with a print height of 150 mm.

Condition: new, Year of construction: 2025, 60cm Endless UV LED Digital Scan Camera CCD Visual AI Printer Scan and print simultaneously - No more stencils - any application required - Different images at the same time - Huge speed advantage Material width: 600mm ENDLESS LENGTH due to conveyor belt Material height: 150mm (Higher throughput available upon request) Recommendation: 3x Ricoh Gen5 for CMYK + White (listed price) 4x Ricoh Gen5 for CMYK + White + Coating (additional charge approx. €3,500) Bljdpfev N H Hwox Amysk Includes vacuum table Includes conveyor belt Includes operator computer Includes CCD Visual AI camera system Depending on the number of heads, 12 - 40 sqm/h or more With 2 heads, approximately 12 sqm per hour is possible Machine dimensions: 1250mm x 1750mm x 1400mm (LxWxH) Weight: approx. 300 kg + pallet Machine power: 2000 W