Used Eos M 080 Precious for sale (70,674)

Condition: excellent (used), functionality: fully functional, power: 63 kW (85.66 HP), fuel type: diesel, overall weight: 8,835 kg, Year of construction: 2018, operating hours: 3,749 h, Kubota KX 080-4 Eco e Plus/SW/Variable boom/Swing arm • Manufacturer: Kubota • Model: KX 080-4 • Year of manufacture: 2018 Fgsdpfx Aoznxd Uolbeg • Operating hours: 3749 hours • Power: 46.5 Kw / 63 hp • Engine: • Travel speed: 2.7-4.8 km/h • Hydraulic quick coupler MS08 • Swing arm • Swivel bucket 150 cm • Ditch bucket 30 cm • Digging depth: 4.60 meters • Bucket arm length: 2.10 meters • Hydraulic system for hammer, grapple, and shear • Transport length: 6.45 m • Transport width: 2.20 m • Transport height: 2.54 m • High/low speed • Engine: Kubota 4-cylinder diesel • Air conditioning • Dozer blade • Overload warning system • Total weight: 8835 kg • German machine • Immediately ready for use • This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typos not excluded. - Sale subject to our general terms and conditions.

Condition: used, Year of construction: 2018, controller manufacturer: Sonstige, controller model: , _____ Description: Year of manuf. : 2018 Fsdpezf T Nmjfx Albegg Control : Sonstige In General: Manufacturer:DMG (Bürener Maschinenfabrik) Year of manufacture:2018 Total number of pumps:5 High-pressure pumps:2 (40 and 80 bar) Filter:Paper belt filter Tank capacity:approx. 980 l

Condition: used, Applicable material: Concrete Capacity: 30 m^3/h Site type concrete batching plants has been issued for easy installation and easy legal procedures. Site batching plants consist of aggregate hoppers, from 2 to 8 pcs differant aggregate can be used such application, belt onveyor or skip hoist to transfer material from hoppers to mixer, mixing section, pan,planetery,twin shaft, single shaft or cone mixer, weighing section. Fsdpfx Aoylhdgjlbjgg Site type concrete batcing plant is for very fast location changer customers. After once installation you will never ned to disassembly iy again due to 4.5 full operation height. With 0,5 and 0,75m3 single shaft and planetery mixer; Polygonmach site plants are best for small scale operations and all type of concrete you need. Site type plant a kind of mobile type plant however it has got shipment price advantages, all site type plant set consist of concrete transfer belt conveyor, cement silo can go with single container around the world. With axles, towing hook make it easy to trasnport in hours. Portable batching plants,concrete plants, mixers are used to prepare precious dosed material by pneumatic cylinders and clamshell outlets, afterwards the material is weighed by weighing bin under hoppers. The material has been consisted of sand and aggregate(0-4mm, 4-8mm, 8-16mm, 16-32mm or similar). For excise material transfer procedure, belt conveyor. The sand and aggregate is waited before discharge to mixer. Additonally, there is weighing bin at top of mixer which consist of cement weighing scale/hopper, water hopper, liqued addtive hoppers. After sand and gravel discharged into mixer, cement, water,additive, sand and gravel is mixed on recipe based the mixing time chnages as per recipes. Mobility: mobile Capacity: 30 m³/h(1,059.44 ft³/h)

Condition: excellent (used), Year of construction: 2015, Year of manufacture: 2015 Wheelbase: 2239 mm Control system: Panasonic WG III Fgedpfotu Tp Sjx Albsg Load capacity: 80 kg.

Condition: refurbished (used), Year of construction: 2013, machine/vehicle number: R-00685, load capacity: 20 kg, arm reach: 1,813 mm, controller manufacturer: R-30iB A-Size, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC M-20iA/20M manufactured in 2013.02. The robot comes with an R-30iB A-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-20iA/20M Model Number: A05B-1222-B702 Year of Manufacture Robot: 2013.02 Warranty term (months): 12   Payload (kg): 20 Reach (mm): 1813 Repeatability (mm): ± 0.08 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 250   Controller: R-30iB A-Size Year of Manufacture Cabinet: 2013.01 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 10 Fgsdpfxszzz Hrs Albsg  

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 345, type of input current: three-phase, Equipment: documentation/manual, We are offering this very well-maintained Okuma LB200-M-C CNC lathe, year of manufacture unknown. Rated voltage: 400 V Number of phases: 3 Frequency: 50 Hz Maximum power consumption: 20.5 kVA Total current consumption: 29.6 A Maximum motor current consumption: 47 A Current interruption at: 10 kA Diagram No.: W6200-100-956-5 Serial No.: 0345 If you have any questions or require further information, please feel free to send us a message or call us. Fedpfx Alezyfw Sobjgg

Condition: excellent (used), Eos EOSINT plastic laser sintering systems Here, we offer an Eos EOSINT plastic laser sintering system. Fgedpfxjzdyx Es Albsg Eos EOSINT plastic laser sintering system P385 The following items are included with the EOS P385 system: Build chamber Powder container Cooler: Termo TEK Thermochiller 1100 The following upgrade has already been carried out: Software: CDs Eosint P3 process software PSW 3.2 for Windows 2000, XP Materialise: Magics RP 9.0 Machine upgrade from P360 to P385 on August 10, 2007 Laser replacement on May 15, 2008 X-axis drive motor replacement with a used motor on May 4, 2020 Pyrometer replacement on June 30, 2020 350mm x 350mm x 610mm Voltage 3/N/PE/400V, Frequency 50 Hz Connected load 8 kW, Fuse rating 32 A MAX. laser power 100 W, Laser class open 4 Laser class closed 1 Weight 850 kg Type: EOSINT Upgrade P385 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and specifications are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: good (used), Year of construction: 1997, Meier Vacuum Laminator ICOLAM 080 Manufacturer: Meier Vakuumtechnik GmbH Quantity: 2 units Model: Vacuum Laminator ICOLAM 080 System designation according to documentation: Vacuum Laminator Year of manufacture: 1997 Modification: 2002 (controller replacement / integration into control system as per documentation) Power supply: 3×400 V / N / PE Supply line: 4 × 25 mm² Fedpfx Ajyrnb Eolbogg Control voltage: 24 V DC Protection class: IP54 Standard / Regulation: EN 60 204 Location: Schierling Inspection possible by appointment.

Year of construction: 2020, operating hours: 3,182 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 10465394, MEIKO M-iClean HXL-PW – Double-basket hood dishwasher including stainless steel feed and discharge table with basket guide. Premium class, from ongoing operation at an event venue. Outstanding key data according to the machine display: only 3,182 operating hours and 23,991 cycles – exceptionally low for the year of manufacture (screenshot in the images). Commissioned on 27.02.2020, serial number 10465394, software version 6.4.6. Equipment: Double-basket system 2 × 500 × 500 mm, up to 120 baskets/hour; PowerWash with several pump power levels; Hood automatic with automatic basket recognition; Detergent and rinse aid dosing; Discharge pump; Free pass height 505 mm; includes feed table with roller conveyor and discharge table; connection 400 V. Fsdpfxeznd U Se Albegg Ideal for event venues, catering, canteens, hotels, or large kitchens. Inspection and test run on-site possible and desired. Sold commercially with a proper invoice (VAT shown). Collection/dismantling by arrangement. Price: €10,500 fixed price, plus VAT.

Condition: good (used), Year of construction: 2014, functionality: fully functional, The machine is in fully functional condition, ideal for bakeries, pizzerias, pastry shops or large gastro operations. Thanks to the design with simultaneous rotation of the bowl and spiral, the dough does not overheat and develops gluten perfectly. Technical parameters: Maximum dough capacity: 80 kg Bathroom volume (bowl): 127 liters Minimum mixing: approx. 6 kg Power supply: 3 x 400 V (three-phase current) Fjdpfjzwm Dhex Albogg Safety: Protective cover with safety microswitch (the machine stops immediately when lifted).

Condition: used, Year of construction: 2015, machine/vehicle number: 315031/02, working width: 1,800 mm, workpiece length (max.): 3,000 mm, workpiece height (max.): 25 mm, TECHNICAL DETAILS Workpiece dimensions Maximum length: 3,000 mm Minimum length: 400 mm Maximum width: 1,800 mm Minimum width: 200 mm Maximum thickness: 25 mm Minimum thickness: 3 mm Maximum deflection: 1 mm Maximum paper roll diameter: 500 mm Paper web width: 1,980 mm Maximum working width: 1,800 mm MACHINE DETAILS Minimum temperature: -5 °C Operating speed: 0.8–2 m/min Voltage: 400 V Frequency: 50 Hz Pressure: max. 6 bar Fsdpfx Alszypm Dsbegg EQUIPMENT Roller conveyor TVR18/2000 Working width: 1,800 mm Speed: 0.35–6.1 m/min Roller diameter: 66 mm Roller spacing: 125 mm

Condition: ready for operation (used), Year of construction: 2011, operating hours: 7,308 h, functionality: fully functional, machine/vehicle number: KJFE012284, number of ink cartridges: 11, color channels: 11, number of print heads: 1, resolution (max.): 28,801,440 dpi, paper weight (min.): 80 g/m², paper weight (max.): 500 g/m², paper width (min.): 200 mm, paper width (max.): 1,120 mm, paper height (min.): 127 mm, paper height (max.): 15,000 mm, number of feeding trays: 3, total length: 1,864 mm, total width: 667 mm, total height: 1,218 mm, space requirement length: 1,900 mm, space requirement width: 710 mm, space requirement height: 1,250 mm, counter reading (color): 3,422, year of last overhaul: 2026, type of input current: AC, input current: 1 A, input voltage: 240 V, Equipment: raster image processor, For sale is an Epson Stylus Pro 9900 SpectroProofer with an integrated X-Rite SpectroProofer powered by X-Rite. This is a 44" wide-format, fine art, and proofing printer from a professional photo studio, in well-maintained condition and ready for immediate use, with a current service report dated July 23, 2026. The unit is ideally suited for fine art printing, photographic printing, proofing, graphics and pre-press, advertising technology, CAD/GIS, as well as high-quality poster and art prints, also for museums, galleries and professional photographers. The model uses the proven Epson UltraChrome HDR-11 color pigment ink system and achieves a print resolution of up to 2880x1440 dpi. It handles media up to 44 inches (111.8 cm) wide and paper thicknesses up to 1.5 mm. The printer is ideal for photographers, print service providers, artists, advertising technology or fine art printing. A total of only 3,422 prints have been made. The printer is being sold due to the business owner's retirement. Technical data: - Manufacturer: Epson Fodpfx Aloznmiljbogg - Model: Stylus Pro 9900 + SpectroProofer (X-Rite) - Print width: 44" (111.8 cm) - Printing technology: Epson MicroPiezo TFP - Ink system: UltraChrome HDR (11 colors) - Maximum resolution: 2880x1440 dpi - Roll and single sheet feeder - LAN network connection (cables for connections available) - Weight: approx. 116 kg Scope of delivery: - Epson Stylus Pro 9900 + SpectroProofer (X-Rite) - Roll holder - Catch tray - Power cable - Available accessories (paper rolls of any quality, canvas rolls) - Partially used ink cartridges (depending on the fill level) - 11 ink cartridges (see photos) in original packaging, unopened Condition: The printer is in good condition and was operated only by professional staff in a canton-wide recognized photo store and regularly serviced, most recently in July 2026 (service record available). The operational condition can be inspected on-site at any time by appointment, and a function test can be performed. Location: Visp, SWITZERLAND Loading: Loading can be assisted upon agreement. Worldwide transport is possible, but must be organized by the buyer. Local pick-up is preferred. Private sale. No guarantee or return. Price: 3,250 Euros

Condition: good (used), WMA WMP 08 One-Hand Spot Welder Air-cooled one-hand spot welder for vehicle manufacturing, tank construction, steel cabinet manufacturing, sheet metal processing, and the wire industry - Effortless welding of all sheet metals - Galvanized sheets can be welded perfectly thanks to controlled current rise and fall - Air-cooled, equipped for external water cooling - Tools are easy to change thanks to standardized rotary connectors - Only one connector each for welding current cable, control cable, and water cooling - Reproducible welding results at any time thanks to built-in, automatic energy control Microprocessor Thyristor Control - Constant current control - Seamless process monitoring - Simple and user-friendly operation - All set parameters and process variables can be read at a glance - Changes to welding parameters only by authorized personnel - Configuration and program settings can be managed via a central PC WMA WMS 108 Microprocessor Thyristor Control - 7 welding times - 8 programs - Built-in unit - Automatic Mains frequency detection 50/60 Hz - Power failure-proof parameter storage - "On/Off" switching via button Additional configuration parameters (user-locked): - Program selection - Advance contact - Advance contact time - Two-hand interlock (Check) - Start signal interlock - Current flow control - Response threshold - Current flow control - Monitoring time - Current flow control - Power factor adjustment - First half-wave delay External inputs (24V, DC stabilized and switching) - Thermal switch - Thyristor temperature - Emergency stop - Start 1 - Start 2* - Pressure contact - Program 1* - Program 2* - Pre-stroke on - Program interruption after hold time (force only) - Two-hand interlock (Check)* * These functions can be enabled or disabled via configuration parameters. External inputs (24V, DC stabilized and switching) - Thermal switch - Thyristor temperature - Emergency stop - Start 1 - Start 2* Fgodpfxeq H Aqxj Albeg - Pressure contact - Program 1* - Program 2* - Pre-stroke on - Program interruption after hold time (force only) - Two-hand interlock (Check)* * These functions can be enabled or disabled via configuration parameters. ``` External outputs (24V, DC unstable ± 20%; + switching, max. 5 W): - Solenoid valve pre-stroke - Solenoid valve welding - Relay progress contact - Relay ready Manufacturer: WMA Type: WMP 08-01 Rated voltage: 400 V Mains frequency: 50 Hz Rated power (at 50% duty cycle): 22.5 kVA Control cabinet with PLC logo PDF files available under the Documents tab Financing through our bank is also possible. komplett-konzept.leasingo.de Further items – new and used – can be found in our shop! International shipping costs on request!

Condition: used, Year of construction: 2021, Universal tool milling machine Manufacturer: FPS Model: 620 M-NC Year of manufacture: 2021 - workshop inspected Machine No.: 00 7020 Approx. 1,200 operating hours for the spindle Geometric acceptance with test report Accessories and installed options: - 3D control system SIEMENS 840D sl - Portable electronic handwheel - LED machine light - Machine type switch via key switch to machine tool type, manually controlled milling machine. With the machine open, the manual operation mode and the electronic handwheel can be used. The functions of axis movement and speed control are possible without having to continuously press the enable button. The machine type switch only affects the vertical machining. - Mechanical safety handwheels with scale in all axes - Orientated spindle holder, vertical and horizontal with cycle for thread cutting without a collet - Fixed table 820 x 420 (T-slot: 14 mm) - Tool holder, vertical and horizontal SK 40 with hydraulic clamping system DIN 69872 - Central lubrication, electric - Coolant system, free-standing, 80 liters - Splash guard cabin, moving with the machine with sliding doors and foldable, electrically secured - Control panel mounted on the lower frame and swiveling Fgsdpfxozy Eqre Albjg - CE documentation in printed form and on USB stick - CE declaration of conformity Used, as is The machine is technically in the condition of its year of manufacture.

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, Automatic carousel printing press, 10/12 stations 10 colors 12 printing stations Usable printing area: 50x50 Year: 2000 Pneumatic frame carriers Print test/print start/print end system Fgodjzzpnwspfx Albjg On-screen display of malfunctions Double-pass printing Quick-release system for printing stations No. 1 set of printing stations No. 1 set of squeegees and counter-squeegees

Condition: used, functionality: fully functional, Year of construction: 2020, machine/vehicle number: 2427478, power: 0.5 kW (0.68 HP), load capacity: 230 kg, mast type: telescopic, lifting height: 5,800 mm, platform length: 1,670 mm, platform width: 740 mm, overall weight: 1,630 kg, transport length: 1,860 mm, transport width: 760 mm, transport height: 2,150 mm, fuel type: electric, Equipment: UVV, all wheel drive, Technical Data Year of manufacture: 2020 Motor: Electric Fgsdpfsyqzf Ujx Albog Working height: 7.80 m Platform height: 5.80 m Platform extension: 0.90 m Platform dimensions (L x W): 1.67 m x 0.74 m Overall dimensions (L x W x H): 1.86 m x 0.76 m x 2.15 m Drive system: 2 x 24 VAC / 0.5 kW Lifting drive: 24 VAC / 3 kW Max. load capacity: 230 kg Travel speed: 0.6 - 4.5 km/h Max. gradeability: 25% Motor: Electric 0.5 kW Weight: 1,630 kg All-wheel drive Fully operational, general signs of use

Condition: used, functionality: fully functional, Year of construction: 2020, machine/vehicle number: 2427448, load capacity: 230 kg, platform length: 1,670 mm, platform width: 740 mm, overall weight: 1,415 kg, transport length: 1,860 mm, transport width: 760 mm, transport height: 1,820 mm, fuel type: electric, color: red, Equipment: UVV, all wheel drive, Technical Data Year of manufacture: 2020 Working height: 7.80 m Platform height: 5.80 m Platform extension: 0.90 m Load capacity: 230 kg Load capacity when extended: 113 kg Max. persons: 2 Platform dimensions (L x W): 1.67 m x 0.74 m Overall dimensions (L x W x H): 1.86 m x 0.76 m x 2.14 m Max. gradeability: 25% Travel speed: 0.8 km/h - 4.5 km/h Drive motor: 24 V / 1 kW Fedsyqzf Iepfx Albjgg Lifting motor: 24 V / 2 kW Total weight: 1,415 kg General used condition, fully functional

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: SEAS5050121038350, input voltage: 400 V, total length: 4,000 mm, total width: 4,000 mm, total height: 1,400 mm, compressed air connection: 6.9 bar, type of input current: three-phase, overall weight: 1,565 kg, Automatic screen printing machine M&R Sportsman “E” in very good working condition, manufactured in the USA and known worldwide for its reliability and consistent print quality. The machine is designed for professional textile production and is ideal for medium to high-volume orders. It operates on 400V, 3-phase, 50/60 Hz and requires 100 PSI compressed air. Maximum image size is 50 x 50 cm with a maximum frame size of 66 x 91 cm. The total machine diameter is approximately 3.6 meters. The construction is robust and built for long-term industrial use, offering smooth operation, precise registration, and easy maintenance. Compatible with flash cure units and conveyor dryers. The machine has been maintained and is ready for immediate production. It is currently dismantled and prepared for shipping. Inspection is possible by prior arrangement. Fgjdpfjyvkzwjx Albog

Condition: like new (used), Year of construction: 2026, functionality: fully functional, TRI OPTIQUE Manufacturer: PELLENC Type: M 2800 BB HR Working width: 2,800 mm Option installed in June 2024: separator for all types of metal, including stainless steel, metal sensor. New belt. The machine is capable of sorting all types of plastic by quality, all metals including stainless steel, and wood. The machine has just been serviced. Feeding system: Manufacturer: SINEX Type: MU 75 6500 Power: 2 x 3 kW Output conveyor 1: Fgjdpfsyy Aa Tjx Albjg Manufacturer: RMIS Output conveyor 2: Manufacturer: ARVAL

Condition: like new (used), functionality: fully functional, Year of construction: 2023, workpiece length (max.): 4,200 mm, workpiece width (max.): 1,200 mm, workpiece height (max.): 1,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS DIMENSIONS OF LOG PACKAGES Log packages to be cut, maximum length: 4,200 mm Log packages to be cut, minimum length: 2,500 mm Log packages to be cut, maximum width: 1,200 mm Log packages to be cut, maximum height: 1,200 mm Log packages after cutting, maximum length: 4,000 mm Log packages after cutting, minimum length: 700 mm Remaining cuts (waste), maximum length: 300 mm MACHINE DETAILS MACHINE DATA Machine type: ES 121 SHK 4 m Year of manufacture: 2023 Fgodpfszwt T Aox Albog Operating voltage: 400 V Mains frequency: 50 Hz EQUIPMENT Saw chain, article number 10004788, length 1,900 mm Guide rail, article number 11003322, length 1,900 mm Operating manual, article number 50002270

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, load capacity: 280 kg, arm reach: 2,080 mm, controller manufacturer: KUKA, controller model: KRC4, The KUKA KR 280 R3080 Ultra is a high-performance 6-axis industrial robot from the QUANTEC series, offering a 280 kg payload capacity and a reach of 3080 mm. Designed for versatility, it excels in applications such as welding, material handling, palletizing, and machining. Its lightweight yet rigid construction ensures high precision, energy efficiency, and long-term reliability, even in demanding industrial environments. Frequently used in the following applications: - Palletizing -Depalletizing -Material Handling -Additive Manufacturing -Assembly -Dispensing -Remote TCP. Fsdew Na N Nopfx Albjgg Model: KRC4 KR 280 R3080 Condition: Used Year: 2018 Controller Cabinet: KRC4 Included: Manipulator + KRC4 Control Cabin + All Wire Sets + Teach Pendant As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and design for your specific production needs.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: W25-M5-18-17210, number of axes: 7, The measuring arm was last calibrated in October 2024. The laser scanner was calibrated in April 2024. TECHNICAL DETAILS Measuring system: FARO Quantum M ScanArm Measuring range: 2.5 m Axes: 7 Measuring method: Tactile coordinate measurement and 3D scanning Laser scanner head: FARO LLP HD, Revision 3.2 MACHINE DETAILS Application areas: Dimensional inspection, CAD component comparison, first article inspection (FAI), production control, tool and fixture inspection, and reverse engineering Measuring stand height: 750 - 1,000 mm Measuring stand weight: 17.25 kg Reach: 350 mm EQUIPMENT Fjdpjzx N Rgjfx Albjgg FARO LLP HD laser scanner head, Revision 3.2 Tactile probes MetrologyWorks Kodiak HDP-KCF measuring stand Measuring stand construction: Carbon fiber/aluminum Measuring stand mounting ring: 3"-8 Original FARO transport case Batteries Power supply Cables Mounting accessories Calibration documentation Technical documentation Manual Note: The laptop and PolyWorks software are not included in the offer.

Condition: like new (used), Year of construction: 2017, functionality: fully functional, Manufacturer KELCH GmbH, Weinstadt, Germany Type / Model KENOVA set line V646M Year of manufacture 2017 Design Vertical tool pre-setting and measuring device Measuring range Diameter X up to approx. Ø 430 mm (V6 series) Extended X range up to approx. -100 mm (V6 series) Measuring length Z, depending on V6 version, approx. 800 mm Repeatability of camera approx. ± 2 μm (series specification) Measuring system Optical camera system / CCD camera Optics Telecentric lens; features depend on version Tool holder Modular precision spindle; adapter depends on features Possible holders Fodjzw Ef Repfx Albogg e.g. SK, HSK, PSC, VDI with matching inserts Positioning Coarse and fine positioning in X/Z, depending on features Operation A KELCH pico control terminal can be seen in the photo Mains voltage 90-260 V Mains frequency 50-60 Hz Maximum power consumption 1000 VA Marking CE / Made in Germany

Condition: used, Year of construction: 2019, The Fanuc M-2iA/3S is a high-speed parallel-link (delta) robot designed primarily for ultra-fast picking, packing, and sorting operations in industries like food, pharmaceuticals, electronics, and consumer goods. Key Specifications Payload: 3 kg Controlled Axes: 4 axes (3 parallel axes for XYZ motion + 1 single axis for wrist rotation) Reach (Diameter × Height): 800 mm × 300 mm cylindrical motion envelope Repeatability: ±0.1 mm Fedpfx Ajzx Rrlelbogg Robot Weight: ~115 kg Mounting Position: Inverted (ceiling-mounted above conveyor belts)

Condition: used, Year of construction: 2021, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 8 A, input frequency: 50 Hz, actuation type: manual, Felder table router F 500 M, acquired on March 25, 2021, for profiling, rabbeting, grooving, and edge processing of wood pieces. A classic stationary router for professional woodworking shops. Key technical data: - Machine type: Table router / Spindle router - Model: Felder F 500 M - Spindle diameter: Ø 30 mm - Usable spindle height: approx. 100 mm above the table - Table opening: approx. 180 mm - Spindle speeds: 3000 / 6000 / 8000 / 10,000 rpm - Max. tool diameter at the router fence: approx. 220 mm - Motor power: 4.0 kW - Working height: approx. 916 mm Fodpfx Aeztxt Hjlbogg - Weight: approx. 300–320 kg depending on the version - Dust extraction port: approx. 120 mm at the router fence No warranty.